arm64: dts: allwinner: a64: olinuxino: Fix eMMC supply regulator

A64-OLinuXino-eMMC uses 1.8V for eMMC supply. This is done via a triple
jumper, which sets VCC-PL to either 1.8V or 3.3V. This setting is different
for boards with and without eMMC.

This is not a big issue for DDR52 mode, however the eMMC will not work in
HS200/HS400, since these modes explicitly requires 1.8V.

Fixes: 94f68f3a4b2a ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)")
Cc: stable@vger.kernel.org # v5.4
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
index 96ab022..121e6cc 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
@@ -15,7 +15,7 @@
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins>;
        vmmc-supply = <&reg_dcdc1>;
-       vqmmc-supply = <&reg_dcdc1>;
+       vqmmc-supply = <&reg_eldo1>;
        bus-width = <8>;
        non-removable;
        cap-mmc-hw-reset;