cirrusfb: acceleration improvements
authorKrzysztof Helt <krzysztof.h1@wp.pl>
Tue, 31 Mar 2009 22:25:11 +0000 (15:25 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 1 Apr 2009 15:59:28 +0000 (08:59 -0700)
- Fix color expansion for 16bpp and 32bpp modes in the
  cirrusfb_RectFill().

- Make a function with a common blitter code (cirrusfb_set_blitter).

- Add fb_sync function to allow a higher layer synchronize with the
  blitter.

- Kill one redundant blitter reset.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/video/cirrusfb.c

index cac4e2b..e4ac2f6 100644 (file)
@@ -381,7 +381,7 @@ static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
 static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
                              u_short x, u_short y,
                              u_short width, u_short height,
-                             u_char color, u_short line_length);
+                             u32 color, u_short line_length);
 
 static void bestclock(long freq, int *nom, int *den, int *div);
 
@@ -1550,9 +1550,6 @@ static void init_vgachip(struct fb_info *info)
                /* unlock all extension registers */
                vga_wseq(cinfo->regbase, CL_SEQR6, 0x12);
 
-               /* reset blitter */
-               vga_wgfx(cinfo->regbase, CL_GR31, 0x04);
-
                switch (cinfo->btype) {
                case BT_GD5480:
                        vga_wseq(cinfo->regbase, CL_SEQRF, 0x98);
@@ -1747,6 +1744,17 @@ static void switch_monitor(struct cirrusfb_info *cinfo, int on)
 /* Linux 2.6-style  accelerated functions */
 /******************************************/
 
+static int cirrusfb_sync(struct fb_info *info)
+{
+       struct cirrusfb_info *cinfo = info->par;
+
+       if (!is_laguna(cinfo)) {
+               while (vga_rgfx(cinfo->regbase, CL_GR31) & 0x03)
+                       cpu_relax();
+       }
+       return 0;
+}
+
 static void cirrusfb_fillrect(struct fb_info *info,
                              const struct fb_fillrect *region)
 {
@@ -1966,6 +1974,7 @@ static struct fb_ops cirrusfb_ops = {
        .fb_blank       = cirrusfb_blank,
        .fb_fillrect    = cirrusfb_fillrect,
        .fb_copyarea    = cirrusfb_copyarea,
+       .fb_sync        = cirrusfb_sync,
        .fb_imageblit   = cirrusfb_imageblit,
 };
 
@@ -2586,7 +2595,6 @@ static void RClut(struct cirrusfb_info *cinfo, unsigned char regnum, unsigned ch
 /* FIXME: use interrupts instead */
 static void cirrusfb_WaitBLT(u8 __iomem *regbase)
 {
-       /* now busy-wait until we're done */
        while (vga_rgfx(regbase, CL_GR31) & 0x08)
                cpu_relax();
 }
@@ -2597,58 +2605,12 @@ static void cirrusfb_WaitBLT(u8 __iomem *regbase)
        perform accelerated "scrolling"
 ********************************************************************/
 
-static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
-                           u_short curx, u_short cury,
-                           u_short destx, u_short desty,
-                           u_short width, u_short height,
-                           u_short line_length)
-{
-       u_short nwidth, nheight;
-       u_long nsrc, ndest;
-       u_char bltmode;
-
-       nwidth = width - 1;
-       nheight = height - 1;
-
-       bltmode = 0x00;
-       /* if source adr < dest addr, do the Blt backwards */
-       if (cury <= desty) {
-               if (cury == desty) {
-                       /* if src and dest are on the same line, check x */
-                       if (curx < destx)
-                               bltmode |= 0x01;
-               } else
-                       bltmode |= 0x01;
-       }
-       if (!bltmode) {
-               /* standard case: forward blitting */
-               nsrc = (cury * line_length) + curx;
-               ndest = (desty * line_length) + destx;
-       } else {
-               /* this means start addresses are at the end,
-                * counting backwards
-                */
-               nsrc = cury * line_length + curx +
-                       nheight * line_length + nwidth;
-               ndest = desty * line_length + destx +
-                       nheight * line_length + nwidth;
-       }
-
-       /*
-          run-down of registers to be programmed:
-          destination pitch
-          source pitch
-          BLT width/height
-          source start
-          destination start
-          BLT mode
-          BLT ROP
-          VGA_GFX_SR_VALUE / VGA_GFX_SR_ENABLE: "fill color"
-          start/stop
-        */
-
-       cirrusfb_WaitBLT(regbase);
+static void cirrusfb_set_blitter(u8 __iomem *regbase,
+                           u_short nwidth, u_short nheight,
+                           u_long nsrc, u_long ndest,
+                           u_short bltmode, u_short line_length)
 
+{
        /* pitch: set to line_length */
        /* dest pitch low */
        vga_wgfx(regbase, CL_GR24, line_length & 0xff);
@@ -2694,56 +2656,67 @@ static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
        vga_wgfx(regbase, CL_GR32, 0x0d);       /* BLT ROP */
 
        /* and finally: GO! */
-       vga_wgfx(regbase, CL_GR31, 0x02);       /* BLT Start/status */
+       vga_wgfx(regbase, CL_GR31, 0x82);       /* BLT Start/status */
 }
 
 /*******************************************************************
-       cirrusfb_RectFill()
+       cirrusfb_BitBLT()
 
-       perform accelerated rectangle fill
+       perform accelerated "scrolling"
 ********************************************************************/
 
-static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
-                    u_short x, u_short y, u_short width, u_short height,
-                    u_char color, u_short line_length)
+static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
+                           u_short curx, u_short cury,
+                           u_short destx, u_short desty,
+                           u_short width, u_short height,
+                           u_short line_length)
 {
-       u_short nwidth, nheight;
-       u_long ndest;
-       u_char op;
-
-       nwidth = width - 1;
-       nheight = height - 1;
+       u_short nwidth = width - 1;
+       u_short nheight = height - 1;
+       u_long nsrc, ndest;
+       u_char bltmode;
 
-       ndest = (y * line_length) + x;
+       bltmode = 0x00;
+       /* if source adr < dest addr, do the Blt backwards */
+       if (cury <= desty) {
+               if (cury == desty) {
+                       /* if src and dest are on the same line, check x */
+                       if (curx < destx)
+                               bltmode |= 0x01;
+               } else
+                       bltmode |= 0x01;
+       }
+       /* standard case: forward blitting */
+       nsrc = (cury * line_length) + curx;
+       ndest = (desty * line_length) + destx;
+       if (bltmode) {
+               /* this means start addresses are at the end,
+                * counting backwards
+                */
+               nsrc += nheight * line_length + nwidth;
+               ndest += nheight * line_length + nwidth;
+       }
 
        cirrusfb_WaitBLT(regbase);
 
-       /* pitch: set to line_length */
-       vga_wgfx(regbase, CL_GR24, line_length & 0xff); /* dest pitch low */
-       vga_wgfx(regbase, CL_GR25, line_length >> 8);   /* dest pitch hi */
-       vga_wgfx(regbase, CL_GR26, line_length & 0xff); /* source pitch low */
-       vga_wgfx(regbase, CL_GR27, line_length >> 8);   /* source pitch hi */
+       cirrusfb_set_blitter(regbase, nwidth, nheight,
+                           nsrc, ndest, bltmode, line_length);
+}
 
-       /* BLT width: actual number of pixels - 1 */
-       vga_wgfx(regbase, CL_GR20, nwidth & 0xff);      /* BLT width low */
-       vga_wgfx(regbase, CL_GR21, nwidth >> 8);        /* BLT width hi */
+/*******************************************************************
+       cirrusfb_RectFill()
 
-       /* BLT height: actual number of lines -1 */
-       vga_wgfx(regbase, CL_GR22, nheight & 0xff);     /* BLT height low */
-       vga_wgfx(regbase, CL_GR23, nheight >> 8);       /* BLT width hi */
+       perform accelerated rectangle fill
+********************************************************************/
 
-       /* BLT destination */
-       /* BLT dest low */
-       vga_wgfx(regbase, CL_GR28, (u_char) (ndest & 0xff));
-       /* BLT dest mid */
-       vga_wgfx(regbase, CL_GR29, (u_char) (ndest >> 8));
-       /* BLT dest hi */
-       vga_wgfx(regbase, CL_GR2A, (u_char) (ndest >> 16));
+static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
+                    u_short x, u_short y, u_short width, u_short height,
+                    u32 color, u_short line_length)
+{
+       u_long ndest = (y * line_length) + x;
+       u_char op;
 
-       /* BLT source: set to 0 (is a dummy here anyway) */
-       vga_wgfx(regbase, CL_GR2C, 0x00);       /* BLT src low */
-       vga_wgfx(regbase, CL_GR2D, 0x00);       /* BLT src mid */
-       vga_wgfx(regbase, CL_GR2E, 0x00);       /* BLT src hi */
+       cirrusfb_WaitBLT(regbase);
 
        /* This is a ColorExpand Blt, using the */
        /* same color for foreground and background */
@@ -2751,29 +2724,20 @@ static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
        vga_wgfx(regbase, VGA_GFX_SR_ENABLE, color);    /* background color */
 
        op = 0xc0;
-       if (bits_per_pixel == 16) {
-               vga_wgfx(regbase, CL_GR10, color);      /* foreground color */
-               vga_wgfx(regbase, CL_GR11, color);      /* background color */
-               op = 0x50;
+       if (bits_per_pixel >= 16) {
+               vga_wgfx(regbase, CL_GR10, color >> 8); /* foreground color */
+               vga_wgfx(regbase, CL_GR11, color >> 8); /* background color */
                op = 0xd0;
-       } else if (bits_per_pixel == 32) {
-               vga_wgfx(regbase, CL_GR10, color);      /* foreground color */
-               vga_wgfx(regbase, CL_GR11, color);      /* background color */
-               vga_wgfx(regbase, CL_GR12, color);      /* foreground color */
-               vga_wgfx(regbase, CL_GR13, color);      /* background color */
-               vga_wgfx(regbase, CL_GR14, 0);  /* foreground color */
-               vga_wgfx(regbase, CL_GR15, 0);  /* background color */
-               op = 0x50;
+       }
+       if (bits_per_pixel == 32) {
+               vga_wgfx(regbase, CL_GR12, color >> 16);/* foreground color */
+               vga_wgfx(regbase, CL_GR13, color >> 16);/* background color */
+               vga_wgfx(regbase, CL_GR14, color >> 24);/* foreground color */
+               vga_wgfx(regbase, CL_GR15, color >> 24);/* background color */
                op = 0xf0;
        }
-       /* BLT mode: color expand, Enable 8x8 copy (faster?) */
-       vga_wgfx(regbase, CL_GR30, op); /* BLT mode */
-
-       /* BLT ROP: SrcCopy */
-       vga_wgfx(regbase, CL_GR32, 0x0d);       /* BLT ROP */
-
-       /* and finally: GO! */
-       vga_wgfx(regbase, CL_GR31, 0x02);       /* BLT Start/status */
+       cirrusfb_set_blitter(regbase, width - 1, height - 1,
+                           0, ndest, op, line_length);
 }
 
 /**************************************************************************