mmc: sdhci: introduce sdhci_update_clock helper to re-enable clock
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Mon, 7 Jan 2013 14:31:08 +0000 (16:31 +0200)
committerChris Ball <cjb@laptop.org>
Mon, 11 Feb 2013 18:28:52 +0000 (13:28 -0500)
There are three places where same piece of code is used. Let's split it
to a separate function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
drivers/mmc/host/sdhci.c

index b930767..336ab06 100644 (file)
@@ -1189,6 +1189,15 @@ out:
        host->clock = clock;
 }
 
+static inline void sdhci_update_clock(struct sdhci_host *host)
+{
+       unsigned int clock;
+
+       clock = host->clock;
+       host->clock = 0;
+       sdhci_set_clock(host, clock);
+}
+
 static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
 {
        u8 pwr = 0;
@@ -1418,7 +1427,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 
        if (host->version >= SDHCI_SPEC_300) {
                u16 clk, ctrl_2;
-               unsigned int clock;
 
                /* In case of UHS-I modes, set High Speed Enable */
                if ((ios->timing == MMC_TIMING_MMC_HS200) ||
@@ -1458,9 +1466,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
                        sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
                        /* Re-enable SD Clock */
-                       clock = host->clock;
-                       host->clock = 0;
-                       sdhci_set_clock(host, clock);
+                       sdhci_update_clock(host);
                }
 
 
@@ -1491,9 +1497,7 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
                }
 
                /* Re-enable SD Clock */
-               clock = host->clock;
-               host->clock = 0;
-               sdhci_set_clock(host, clock);
+               sdhci_update_clock(host);
        } else
                sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 
@@ -2083,14 +2087,9 @@ static void sdhci_tasklet_finish(unsigned long param)
                   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
 
                /* Some controllers need this kick or reset won't work here */
-               if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
-                       unsigned int clock;
-
+               if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
                        /* This is to force an update */
-                       clock = host->clock;
-                       host->clock = 0;
-                       sdhci_set_clock(host, clock);
-               }
+                       sdhci_update_clock(host);
 
                /* Spec says we should do both at the same time, but Ricoh
                   controllers do not like that. */