ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
authorKishon Vijay Abraham I <kishon@ti.com>
Tue, 17 Dec 2019 08:51:22 +0000 (14:21 +0530)
committerTony Lindgren <tony@atomide.com>
Tue, 17 Dec 2019 18:21:40 +0000 (10:21 -0800)
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/am571x-idk.dts
arch/arm/boot/dts/am572x-idk-common.dtsi
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

index 820ce3b..67239f7 100644 (file)
        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-       gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mmc1 {
        pinctrl-names = "default", "hs";
        pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
index a064f13..ddf1236 100644 (file)
        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-       gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
        status = "okay";
        mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
index bc76f17..9a94c96 100644 (file)
        gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-       gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
        #sound-dai-cells = <0>;
        assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;