Staging: comedi: s626: fix comment issue
authorRavishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Wed, 8 Jun 2016 09:48:54 +0000 (15:18 +0530)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 18 Jun 2016 03:53:39 +0000 (20:53 -0700)
This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line'found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/s626.h

index b83424e..6a00a64 100644 (file)
 #define S626_ENCODER_CHANNELS   6
 #define S626_DIO_CHANNELS       48
 #define S626_DIO_BANKS         3       /* Number of DIO groups. */
-#define S626_DIO_EXTCHANS      40      /* Number of extended-capability
-                                        * DIO channels. */
+#define S626_DIO_EXTCHANS      40      /*
+                                        * Number of extended-capability
+                                        * DIO channels.
+                                        */
 
 #define S626_NUM_TRIMDACS      12      /* Number of valid TrimDAC channels. */
 
 #define S626_GSEL_BIPOLAR10V   0x00A0  /* S626_LP_GSEL setting 10V bipolar. */
 
 /* Error codes that must be visible to this base class. */
-#define S626_ERR_ILLEGAL_PARM  0x00010000      /* Illegal function parameter
-                                                * value was specified. */
+#define S626_ERR_ILLEGAL_PARM  0x00010000      /*
+                                                * Illegal function parameter
+                                                * value was specified.
+                                                */
 #define S626_ERR_I2C           0x00020000      /* I2C error. */
-#define S626_ERR_COUNTERSETUP  0x00200000      /* Illegal setup specified for
-                                                * counter channel. */
+#define S626_ERR_COUNTERSETUP  0x00200000      /*
+                                                * Illegal setup specified for
+                                                * counter channel.
+                                                */
 #define S626_ERR_DEBI_TIMEOUT  0x00400000      /* DEBI transfer timed out. */
 
 /*
  * Organization (physical order) and size (in DWORDs) of logical DMA buffers
  * contained by ANA_DMABUF.
  */
-#define S626_ADC_DMABUF_DWORDS 40      /* ADC DMA buffer must hold 16 samples,
-                                        * plus pre/post garbage samples. */
-#define S626_DAC_WDMABUF_DWORDS        1       /* DAC output DMA buffer holds a single
-                                        * sample. */
+#define S626_ADC_DMABUF_DWORDS 40      /*
+                                        * ADC DMA buffer must hold 16 samples,
+                                        * plus pre/post garbage samples.
+                                        */
+#define S626_DAC_WDMABUF_DWORDS        1       /*
+                                        * DAC output DMA buffer holds a single
+                                        * sample.
+                                        */
 
 /* All remaining space in 4KB DMA buffer is available for the RPS1 program. */
 
 #define S626_RPS_IRQ           0x60000000      /* IRQ */
 
 #define S626_RPS_LOGICAL_OR    0x08000000      /* Logical OR conditionals. */
-#define S626_RPS_INVERT                0x04000000      /* Test for negated
-                                                * semaphores. */
+#define S626_RPS_INVERT                0x04000000      /*
+                                                * Test for negated
+                                                * semaphores.
+                                                */
 #define S626_RPS_DEBI          0x00000002      /* DEBI done */
 
-#define S626_RPS_SIG0          0x00200000      /* RPS semaphore 0
-                                                * (used by ADC). */
-#define S626_RPS_SIG1          0x00400000      /* RPS semaphore 1
-                                                * (used by DAC). */
-#define S626_RPS_SIG2          0x00800000      /* RPS semaphore 2
-                                                * (not used). */
+#define S626_RPS_SIG0          0x00200000      /*
+                                                * RPS semaphore 0
+                                                * (used by ADC).
+                                                */
+#define S626_RPS_SIG1          0x00400000      /*
+                                                * RPS semaphore 1
+                                                * (used by DAC).
+                                                */
+#define S626_RPS_SIG2          0x00800000      /*
+                                                * RPS semaphore 2
+                                                * (not used).
+                                                */
 #define S626_RPS_GPIO2         0x00080000      /* RPS GPIO2 */
 #define S626_RPS_GPIO3         0x00100000      /* RPS GPIO3 */
 
-#define S626_RPS_SIGADC                S626_RPS_SIG0   /* Trigger/status for
-                                                * ADC's RPS program. */
-#define S626_RPS_SIGDAC                S626_RPS_SIG1   /* Trigger/status for
-                                                * DAC's RPS program. */
+#define S626_RPS_SIGADC                S626_RPS_SIG0   /*
+                                                * Trigger/status for
+                                                * ADC's RPS program.
+                                                */
+#define S626_RPS_SIGDAC                S626_RPS_SIG1   /*
+                                                * Trigger/status for
+                                                * DAC's RPS program.
+                                                */
 
 /* RPS clock parameters. */
-#define S626_RPSCLK_SCALAR     8       /* This is apparent ratio of
-                                        * PCI/RPS clks (undocumented!!). */
+#define S626_RPSCLK_SCALAR     8       /*
+                                        * This is apparent ratio of
+                                        * PCI/RPS clks (undocumented!!).
+                                        */
 #define S626_RPSCLK_PER_US     (33 / S626_RPSCLK_SCALAR)
-                                       /* Number of RPS clocks in one
-                                        * microsecond. */
+                                       /*
+                                        * Number of RPS clocks in one
+                                        * microsecond.
+                                        */
 
 /* Event counter source addresses. */
 #define S626_SBA_RPS_A0                0x27    /* Time of RPS0 busy, in PCI clocks. */
 
 /* GPIO constants. */
-#define S626_GPIO_BASE         0x10004000      /* GPIO 0,2,3 = inputs,
-                                                * GPIO3 = IRQ; GPIO1 = out. */
+#define S626_GPIO_BASE         0x10004000      /*
+                                                * GPIO 0,2,3 = inputs,
+                                                * GPIO3 = IRQ; GPIO1 = out.
+                                                */
 #define S626_GPIO1_LO          0x00000000      /* GPIO1 set to LOW. */
 #define S626_GPIO1_HI          0x00001000      /* GPIO1 set to HIGH. */
 
 /* Primary Status Register (PSR) constants. */
 #define S626_PSR_DEBI_E                0x00040000      /* DEBI event flag. */
 #define S626_PSR_DEBI_S                0x00080000      /* DEBI status flag. */
-#define S626_PSR_A2_IN         0x00008000      /* Audio output DMA2 protection
-                                                * address reached. */
-#define S626_PSR_AFOU          0x00000800      /* Audio FIFO under/overflow
-                                                * detected. */
-#define S626_PSR_GPIO2         0x00000020      /* GPIO2 input pin: 0=AdcBusy,
-                                                * 1=AdcIdle. */
-#define S626_PSR_EC0S          0x00000001      /* Event counter 0 threshold
-                                                * reached. */
+#define S626_PSR_A2_IN         0x00008000      /*
+                                                * Audio output DMA2 protection
+                                                * address reached.
+                                                */
+#define S626_PSR_AFOU          0x00000800      /*
+                                                * Audio FIFO under/overflow
+                                                * detected.
+                                                */
+#define S626_PSR_GPIO2         0x00000020      /*
+                                                * GPIO2 input pin: 0=AdcBusy,
+                                                * 1=AdcIdle.
+                                                */
+#define S626_PSR_EC0S          0x00000001      /*
+                                                * Event counter 0 threshold
+                                                * reached.
+                                                */
 
 /* Secondary Status Register (SSR) constants. */
-#define S626_SSR_AF2_OUT       0x00000200      /* Audio 2 output FIFO
-                                                * under/overflow detected. */
+#define S626_SSR_AF2_OUT       0x00000200      /*
+                                                * Audio 2 output FIFO
+                                                * under/overflow detected.
+                                                */
 
 /* Master Control Register 1 (MC1) constants. */
 #define S626_MC1_SOFT_RESET    0x80000000      /* Invoke 7146 soft reset. */
-#define S626_MC1_SHUTDOWN      0x3FFF0000      /* Shut down all MC1-controlled
-                                                * enables. */
+#define S626_MC1_SHUTDOWN      0x3FFF0000      /*
+                                                * Shut down all MC1-controlled
+                                                * enables.
+                                                */
 
 #define S626_MC1_ERPS1         0x2000  /* Enab/disable RPS task 1. */
 #define S626_MC1_ERPS0         0x1000  /* Enab/disable RPS task 0. */
 #define S626_P_DEBIAD          0x0088  /* DEBI target address. */
 #define S626_P_I2CCTRL         0x008C  /* I2C control. */
 #define S626_P_I2CSTAT         0x0090  /* I2C status. */
-#define S626_P_BASEA2_IN       0x00AC  /* Audio input 2 base physical DMAbuf
-                                        * address. */
-#define S626_P_PROTA2_IN       0x00B0  /* Audio input 2 physical DMAbuf
-                                        * protection address. */
+#define S626_P_BASEA2_IN       0x00AC  /*
+                                        * Audio input 2 base physical DMAbuf
+                                        * address.
+                                        */
+#define S626_P_PROTA2_IN       0x00B0  /*
+                                        * Audio input 2 physical DMAbuf
+                                        * protection address.
+                                        */
 #define S626_P_PAGEA2_IN       0x00B4  /* Audio input 2 paging attributes. */
-#define S626_P_BASEA2_OUT      0x00B8  /* Audio output 2 base physical DMAbuf
-                                        * address. */
-#define S626_P_PROTA2_OUT      0x00BC  /* Audio output 2 physical DMAbuf
-                                        * protection address. */
+#define S626_P_BASEA2_OUT      0x00B8  /*
+                                        * Audio output 2 base physical DMAbuf
+                                        * address.
+                                        */
+#define S626_P_PROTA2_OUT      0x00BC  /*
+                                        * Audio output 2 physical DMAbuf
+                                        * protection address.
+                                        */
 #define S626_P_PAGEA2_OUT      0x00C0  /* Audio output 2 paging attributes. */
 #define S626_P_RPSPAGE0                0x00C4  /* RPS0 page. */
 #define S626_P_RPSPAGE1                0x00C8  /* RPS1 page. */
 #define S626_P_PSR             0x0110  /* Primary status. */
 #define S626_P_SSR             0x0114  /* Secondary status. */
 #define S626_P_EC1R            0x0118  /* Event counter set 1. */
-#define S626_P_ADP4            0x0138  /* Logical audio DMA pointer of audio
-                                        * input FIFO A2_IN. */
+#define S626_P_ADP4            0x0138  /*
+                                        * Logical audio DMA pointer of audio
+                                        * input FIFO A2_IN.
+                                        */
 #define S626_P_FB_BUFFER1      0x0144  /* Audio feedback buffer 1. */
 #define S626_P_FB_BUFFER2      0x0148  /* Audio feedback buffer 2. */
 #define S626_P_TSL1            0x0180  /* Audio time slot list 1. */
 #define S626_LP_RDMISC2                0x0082  /* Read Misc2. */
 
 /* Bit masks for MISC1 register that are the same for reads and writes. */
-#define S626_MISC1_WENABLE     0x8000  /* enab writes to MISC2 (except Clear
-                                        * Watchdog bit). */
+#define S626_MISC1_WENABLE     0x8000  /*
+                                        * enab writes to MISC2 (except Clear
+                                        * Watchdog bit).
+                                        */
 #define S626_MISC1_WDISABLE    0x0000  /* Disable writes to MISC2. */
-#define S626_MISC1_EDCAP       0x1000  /* Enable edge capture on DIO chans
-                                        * specified by S626_LP_WRCAPSELx. */
-#define S626_MISC1_NOEDCAP     0x0000  /* Disable edge capture on specified
-                                        * DIO chans. */
+#define S626_MISC1_EDCAP       0x1000  /*
+                                        * Enable edge capture on DIO chans
+                                        * specified by S626_LP_WRCAPSELx.
+                                        */
+#define S626_MISC1_NOEDCAP     0x0000  /*
+                                        * Disable edge capture on specified
+                                        * DIO chans.
+                                        */
 
 /* Bit masks for MISC1 register reads. */
 #define S626_RDMISC1_WDTIMEOUT 0x4000  /* Watchdog timer timed out. */
 #define S626_A1_RUN            0x20000000      /* Run A1 based on TSL1. */
 #define S626_A1_SWAP           0x00200000      /* Use big-endian for A1. */
 #define S626_A2_SWAP           0x00100000      /* Use big-endian for A2. */
-#define S626_WS_MODES          0x00019999      /* WS0 = TSL1 trigger input,
-                                                * WS1-WS4 = CS* outputs. */
-
-#if S626_PLATFORM == S626_INTEL                /* Base ACON1 config: always run
-                                        * A1 based on TSL1. */
+#define S626_WS_MODES          0x00019999      /*
+                                                * WS0 = TSL1 trigger input,
+                                                * WS1-WS4 = CS* outputs.
+                                                */
+
+#if S626_PLATFORM == S626_INTEL                /*
+                                        * Base ACON1 config: always run
+                                        * A1 based on TSL1.
+                                        */
 #define S626_ACON1_BASE                (S626_WS_MODES | S626_A1_RUN)
 #elif S626_PLATFORM == S626_MOTOROLA
 #define S626_ACON1_BASE                \
        (S626_WS_MODES | S626_A1_RUN | S626_A1_SWAP | S626_A2_SWAP)
 #endif
 
-#define S626_ACON1_ADCSTART    S626_ACON1_BASE /* Start ADC: run A1
-                                                * based on TSL1. */
+#define S626_ACON1_ADCSTART    S626_ACON1_BASE /*
+                                                * Start ADC: run A1
+                                                * based on TSL1.
+                                                */
 #define S626_ACON1_DACSTART    (S626_ACON1_BASE | S626_A2_RUN)
 /* Start transmit to DAC: run A2 based on TSL2. */
 #define S626_ACON1_DACSTOP     S626_ACON1_BASE /* Halt A2. */
 
 /* Bit masks for ACON2 register. */
 #define S626_A1_CLKSRC_BCLK1   0x00000000      /* A1 bit rate = BCLK1 (ADC). */
-#define S626_A2_CLKSRC_X1      0x00800000      /* A2 bit rate = ACLK/1
-                                                * (DACs). */
-#define S626_A2_CLKSRC_X2      0x00C00000      /* A2 bit rate = ACLK/2
-                                                * (DACs). */
-#define S626_A2_CLKSRC_X4      0x01400000      /* A2 bit rate = ACLK/4
-                                                * (DACs). */
+#define S626_A2_CLKSRC_X1      0x00800000      /*
+                                                * A2 bit rate = ACLK/1
+                                                * (DACs).
+                                                */
+#define S626_A2_CLKSRC_X2      0x00C00000      /*
+                                                * A2 bit rate = ACLK/2
+                                                * (DACs).
+                                                */
+#define S626_A2_CLKSRC_X4      0x01400000      /*
+                                                * A2 bit rate = ACLK/4
+                                                * (DACs).
+                                                */
 #define S626_INVERT_BCLK2      0x00100000      /* Invert BCLK2 (DACs). */
 #define S626_BCLK2_OE          0x00040000      /* Enable BCLK2 (DACs). */
-#define S626_ACON2_XORMASK     0x000C0000      /* XOR mask for ACON2
-                                                * active-low bits. */
+#define S626_ACON2_XORMASK     0x000C0000      /*
+                                                * XOR mask for ACON2
+                                                * active-low bits.
+                                                */
 
 #define S626_ACON2_INIT                (S626_ACON2_XORMASK ^ \
                                 (S626_A1_CLKSRC_BCLK1 | S626_A2_CLKSRC_X2 | \
 #define S626_WS3               0x10000000
 #define S626_WS4               0x08000000
 #define S626_RSD1              0x01000000      /* Shift A1 data in on SD1. */
-#define S626_SDW_A1            0x00800000      /* Store rcv'd char at next char
-                                                * slot of DWORD1 buffer. */
-#define S626_SIB_A1            0x00400000      /* Store rcv'd char at next
-                                                * char slot of FB1 buffer. */
-#define S626_SF_A1             0x00200000      /* Write unsigned long
-                                                * buffer to input FIFO. */
+#define S626_SDW_A1            0x00800000      /*
+                                                * Store rcv'd char at next char
+                                                * slot of DWORD1 buffer.
+                                                */
+#define S626_SIB_A1            0x00400000      /*
+                                                * Store rcv'd char at next
+                                                * char slot of FB1 buffer.
+                                                */
+#define S626_SF_A1             0x00200000      /*
+                                                * Write unsigned long
+                                                * buffer to input FIFO.
+                                                */
 
 /* Select parallel-to-serial converter's data source: */
 #define S626_XFIFO_0           0x00000000      /* Data fifo byte 0. */
 #define S626_XFB1              0x00000050      /* FB_BUFFER byte 1. */
 #define S626_XFB2              0x00000060      /* FB_BUFFER byte 2. */
 #define S626_XFB3              0x00000070      /* FB_BUFFER byte 3. */
-#define S626_SIB_A2            0x00000200      /* Store next dword from A2's
+#define S626_SIB_A2            0x00000200      /*
+                                                * Store next dword from A2's
                                                 * input shifter to FB2
-                                                * buffer. */
-#define S626_SF_A2             0x00000100      /* Store next dword from A2's
+                                                * buffer.
+                                                */
+#define S626_SF_A2             0x00000100      /*
+                                                * Store next dword from A2's
                                                 * input shifter to its input
-                                                * fifo. */
-#define S626_LF_A2             0x00000080      /* Load next dword from A2's
+                                                * fifo.
+                                                */
+#define S626_LF_A2             0x00000080      /*
+                                                * Load next dword from A2's
                                                 * output fifo into its
-                                                * output dword buffer. */
+                                                * output dword buffer.
+                                                */
 #define S626_XSD2              0x00000008      /* Shift data out on SD2. */
 #define S626_RSD3              0x00001800      /* Shift data in on SD3. */
 #define S626_RSD2              0x00001000      /* Shift data in on SD2. */
-#define S626_LOW_A2            0x00000002      /* Drive last SD low for 7 clks,
-                                                * then tri-state. */
+#define S626_LOW_A2            0x00000002      /*
+                                                * Drive last SD low for 7 clks,
+                                                * then tri-state.
+                                                */
 #define S626_EOS               0x00000001      /* End of superframe. */
 
 /* I2C configuration constants. */
-#define S626_I2C_CLKSEL                0x0400          /* I2C bit rate =
-                                                * PCIclk/480 = 68.75 KHz. */
-#define S626_I2C_BITRATE       68.75           /* I2C bus data bit rate
+#define S626_I2C_CLKSEL                0x0400          /*
+                                                * I2C bit rate =
+                                                * PCIclk/480 = 68.75 KHz.
+                                                */
+#define S626_I2C_BITRATE       68.75           /*
+                                                * I2C bus data bit rate
                                                 * (determined by
-                                                * S626_I2C_CLKSEL) in KHz. */
-#define S626_I2C_WRTIME                15.0            /* Worst case time, in msec,
+                                                * S626_I2C_CLKSEL) in KHz.
+                                                */
+#define S626_I2C_WRTIME                15.0            /*
+                                                * Worst case time, in msec,
                                                 * for EEPROM internal write
-                                                * op. */
+                                                * op.
+                                                */
 
 /* I2C manifest constants. */
 
 #define S626_I2C_B0(ATTR, VAL) (((ATTR) << 2) | ((VAL) <<  8))
 
 /* DEBI command constants. */
-#define S626_DEBI_CMD_SIZE16   (2 << 17)       /* Transfer size is always
-                                                * 2 bytes. */
+#define S626_DEBI_CMD_SIZE16   (2 << 17)       /*
+                                                * Transfer size is always
+                                                * 2 bytes.
+                                                */
 #define S626_DEBI_CMD_READ     0x00010000      /* Read operation. */
 #define S626_DEBI_CMD_WRITE    0x00000000      /* Write operation. */
 
 #define S626_DEBI_CMD_WRWORD   (S626_DEBI_CMD_WRITE | S626_DEBI_CMD_SIZE16)
 
 /* DEBI configuration constants. */
-#define S626_DEBI_CFG_XIRQ_EN  0x80000000      /* Enable external interrupt
-                                                * on GPIO3. */
+#define S626_DEBI_CFG_XIRQ_EN  0x80000000      /*
+                                                * Enable external interrupt
+                                                * on GPIO3.
+                                                */
 #define S626_DEBI_CFG_XRESUME  0x40000000      /* Resume block */
-                                               /* Transfer when XIRQ
-                                                * deasserted. */
+                                               /*
+                                                * Transfer when XIRQ
+                                                * deasserted.
+                                                */
 #define S626_DEBI_CFG_TOQ      0x03C00000      /* Timeout (15 PCI cycles). */
 #define S626_DEBI_CFG_FAST     0x10000000      /* Fast mode enable. */
 
 /* 4-bit field that specifies DEBI timeout value in PCI clock cycles: */
-#define S626_DEBI_CFG_TOUT_BIT 22      /* Finish DEBI cycle after this many
-                                        * clocks. */
+#define S626_DEBI_CFG_TOUT_BIT 22      /*
+                                        * Finish DEBI cycle after this many
+                                        * clocks.
+                                        */
 
 /* 2-bit field that specifies Endian byte lane steering: */
-#define S626_DEBI_CFG_SWAP_NONE        0x00000000      /* Straight - don't swap any
-                                                * bytes (Intel). */
+#define S626_DEBI_CFG_SWAP_NONE        0x00000000      /*
+                                                * Straight - don't swap any
+                                                * bytes (Intel).
+                                                */
 #define S626_DEBI_CFG_SWAP_2   0x00100000      /* 2-byte swap (Motorola). */
 #define S626_DEBI_CFG_SWAP_4   0x00200000      /* 4-byte swap. */
-#define S626_DEBI_CFG_SLAVE16  0x00080000      /* Slave is able to serve
-                                                * 16-bit cycles. */
-#define S626_DEBI_CFG_INC      0x00040000      /* Enable address increment
-                                                * for block transfers. */
+#define S626_DEBI_CFG_SLAVE16  0x00080000      /*
+                                                * Slave is able to serve
+                                                * 16-bit cycles.
+                                                */
+#define S626_DEBI_CFG_INC      0x00040000      /*
+                                                * Enable address increment
+                                                * for block transfers.
+                                                */
 #define S626_DEBI_CFG_INTEL    0x00020000      /* Intel style local bus. */
 #define S626_DEBI_CFG_TIMEROFF 0x00010000      /* Disable timer. */
 
 #if S626_PLATFORM == S626_INTEL
 
-#define S626_DEBI_TOUT         7       /* Wait 7 PCI clocks (212 ns) before
-                                        * polling RDY. */
+#define S626_DEBI_TOUT         7       /*
+                                        * Wait 7 PCI clocks (212 ns) before
+                                        * polling RDY.
+                                        */
 
 /* Intel byte lane steering (pass through all byte lanes). */
 #define S626_DEBI_SWAP         S626_DEBI_CFG_SWAP_NONE
 
 #elif S626_PLATFORM == S626_MOTOROLA
 
-#define S626_DEBI_TOUT         15      /* Wait 15 PCI clocks (454 ns) maximum
-                                        * before timing out. */
+#define S626_DEBI_TOUT         15      /*
+                                        * Wait 15 PCI clocks (454 ns) maximum
+                                        * before timing out.
+                                        */
 
 /* Motorola byte lane steering. */
 #define S626_DEBI_SWAP         S626_DEBI_CFG_SWAP_2
 
 /* LoadSrc values: */
 #define S626_LOADSRC_INDX      0       /* Preload core in response to Index. */
-#define S626_LOADSRC_OVER      1       /* Preload core in response to
-                                        * Overflow. */
-#define S626_LOADSRCB_OVERA    2       /* Preload B core in response to
-                                        * A Overflow. */
+#define S626_LOADSRC_OVER      1       /*
+                                        * Preload core in response to
+                                        * Overflow.
+                                        */
+#define S626_LOADSRCB_OVERA    2       /*
+                                        * Preload B core in response to
+                                        * A Overflow.
+                                        */
 #define S626_LOADSRC_NONE      3       /* Never preload core. */
 
 /* IntSrc values: */
 #define S626_CNTSRC_SYSCLK_DOWN        3       /* System clock down */
 
 /* ClkPol values: */
-#define S626_CLKPOL_POS                0       /* Counter/Extender clock is
-                                        * active high. */
-#define S626_CLKPOL_NEG                1       /* Counter/Extender clock is
-                                        * active low. */
+#define S626_CLKPOL_POS                0       /*
+                                        * Counter/Extender clock is
+                                        * active high.
+                                        */
+#define S626_CLKPOL_NEG                1       /*
+                                        * Counter/Extender clock is
+                                        * active low.
+                                        */
 #define S626_CNTDIR_UP         0       /* Timer counts up. */
 #define S626_CNTDIR_DOWN       1       /* Timer counts down. */
 
 
 /* Sanity-check limits for parameters. */
 
-#define S626_NUM_COUNTERS      6       /* Maximum valid counter
-                                        * logical channel number. */
+#define S626_NUM_COUNTERS      6       /*
+                                        * Maximum valid counter
+                                        * logical channel number.
+                                        */
 #define S626_NUM_INTSOURCES    4
 #define S626_NUM_LATCHSOURCES  4
 #define S626_NUM_CLKMULTS      4