kfree(io->urbs);
io->urbs = NULL;
}
-#if 0 /* LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35) */
- if (io->dev->dev.dma_mask != NULL)
- usb_buffer_unmap_sg(io->dev, usb_pipein(io->pipe),
- io->sg, io->nents);
-#endif
io->dev = NULL;
}
-#if 0
-static void rts51x_sg_complete(struct urb *urb)
-{
- struct usb_sg_request *io = urb->context;
- int status = urb->status;
-
- spin_lock(&io->lock);
-
- /* In 2.5 we require hcds' endpoint queues not to progress after fault
- * reports, until the completion callback (this!) returns. That lets
- * device driver code (like this routine) unlink queued urbs first,
- * if it needs to, since the HC won't work on them at all. So it's
- * not possible for page N+1 to overwrite page N, and so on.
- *
- * That's only for "hard" faults; "soft" faults (unlinks) sometimes
- * complete before the HCD can get requests away from hardware,
- * though never during cleanup after a hard fault.
- */
- if (io->status
- && (io->status != -ECONNRESET
- || status != -ECONNRESET)
- && urb->actual_length) {
- dev_err(io->dev->bus->controller,
- "dev %s ep%d%s scatterlist error %d/%d\n",
- io->dev->devpath,
- usb_endpoint_num(&urb->ep->desc),
- usb_urb_dir_in(urb) ? "in" : "out",
- status, io->status);
- /* BUG (); */
- }
-
- if (io->status == 0 && status && status != -ECONNRESET) {
- int i, found, retval;
-
- io->status = status;
-
- /* the previous urbs, and this one, completed already.
- * unlink pending urbs so they won't rx/tx bad data.
- * careful: unlink can sometimes be synchronous...
- */
- spin_unlock(&io->lock);
- for (i = 0, found = 0; i < io->entries; i++) {
- if (!io->urbs[i] || !io->urbs[i]->dev)
- continue;
- if (found) {
- retval = usb_unlink_urb(io->urbs[i]);
- if (retval != -EINPROGRESS &&
- retval != -ENODEV &&
- retval != -EBUSY)
- dev_err(&io->dev->dev,
- "%s, unlink --> %d\n",
- __func__, retval);
- } else if (urb == io->urbs[i])
- found = 1;
- }
- spin_lock(&io->lock);
- }
- urb->dev = NULL;
-
- /* on the last completion, signal usb_sg_wait() */
- io->bytes += urb->actual_length;
- io->count--;
- if (!io->count)
- complete(&io->complete);
-
- spin_unlock(&io->lock);
-}
-
-/* This function is ported from usb_sg_init, which can transfer
- * sg list partially */
-int rts51x_sg_init_partial(struct usb_sg_request *io, struct usb_device *dev,
- unsigned pipe, unsigned period, void *buf, struct scatterlist **sgptr,
- unsigned int *offset, int nents, size_t length, gfp_t mem_flags)
-{
- int i;
- int urb_flags;
- int dma;
- struct scatterlist *sg = *sgptr, *first_sg;
-
- first_sg = (struct scatterlist *)buf;
- if (!sg)
- sg = first_sg;
-
- if (!io || !dev || !sg
- || usb_pipecontrol(pipe)
- || usb_pipeisoc(pipe)
- || (nents <= 0))
- return -EINVAL;
-
- spin_lock_init(&io->lock);
- io->dev = dev;
- io->pipe = pipe;
- io->sg = first_sg; /* used by unmap */
- io->nents = nents;
-
- RTS51X_DEBUGP("Before map, sg address: 0x%x\n", (unsigned int)sg);
- RTS51X_DEBUGP("Before map, dev address: 0x%x\n", (unsigned int)dev);
-
- /* not all host controllers use DMA (like the mainstream pci ones);
- * they can use PIO (sl811) or be software over another transport.
- */
- dma = (dev->dev.dma_mask != NULL);
- if (dma) {
- /* map the whole sg list, because here we only know the
- * total nents */
- io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
- first_sg, nents);
- } else {
- io->entries = nents;
- }
-
- /* initialize all the urbs we'll use */
- if (io->entries <= 0)
- return io->entries;
-
- io->urbs = kmalloc(io->entries * sizeof *io->urbs, mem_flags);
- if (!io->urbs)
- goto nomem;
-
- urb_flags = URB_NO_INTERRUPT;
- if (dma)
- urb_flags |= URB_NO_TRANSFER_DMA_MAP;
- if (usb_pipein(pipe))
- urb_flags |= URB_SHORT_NOT_OK;
-
- RTS51X_DEBUGP("io->entries = %d\n", io->entries);
-
- for (i = 0; (sg != NULL) && (length > 0); i++) {
- unsigned len;
-
- RTS51X_DEBUGP("sg address: 0x%x\n", (unsigned int)sg);
- RTS51X_DEBUGP("length = %d, *offset = %d\n", length, *offset);
-
- io->urbs[i] = usb_alloc_urb(0, mem_flags);
- if (!io->urbs[i]) {
- io->entries = i;
- goto nomem;
- }
-
- io->urbs[i]->dev = NULL;
- io->urbs[i]->pipe = pipe;
- io->urbs[i]->interval = period;
- io->urbs[i]->transfer_flags = urb_flags;
-
- io->urbs[i]->complete = rts51x_sg_complete;
- io->urbs[i]->context = io;
-
- if (dma) {
- io->urbs[i]->transfer_dma =
- sg_dma_address(sg) + *offset;
- len = sg_dma_len(sg) - *offset;
- io->urbs[i]->transfer_buffer = NULL;
- RTS51X_DEBUGP(" -- sg entry dma length = %d\n",
- sg_dma_len(sg));
- } else {
- /* hc may use _only_ transfer_buffer */
- io->urbs[i]->transfer_buffer = sg_virt(sg) + *offset;
- len = sg->length - *offset;
- RTS51X_DEBUGP(" -- sg entry length = %d\n",
- sg->length);
- }
-
- if (length >= len) {
- *offset = 0;
- io->urbs[i]->transfer_buffer_length = len;
- length -= len;
- sg = sg_next(sg);
- } else {
- *offset += length;
- io->urbs[i]->transfer_buffer_length = length;
- length = 0;
- }
- if (length == 0)
- io->entries = i + 1;
-#if 0
- if (length) {
- len = min_t(unsigned, len, length);
- length -= len;
- if (length == 0) {
- io->entries = i + 1;
- *offset += len;
- } else {
- *offset = 0;
- }
- }
-#endif
- }
- RTS51X_DEBUGP("In %s, urb count: %d\n", __func__, i);
- io->urbs[--i]->transfer_flags &= ~URB_NO_INTERRUPT;
-
- RTS51X_DEBUGP("sg address stored in sgptr: 0x%x\n", (unsigned int)sg);
- *sgptr = sg;
-
- /* transaction state */
- io->count = io->entries;
- io->status = 0;
- io->bytes = 0;
- init_completion(&io->complete);
- return 0;
-nomem:
- rts51x_sg_clean(io);
- return -ENOMEM;
-}
-#endif
int rts51x_sg_init(struct usb_sg_request *io, struct usb_device *dev,
unsigned pipe, unsigned period, struct scatterlist *sg,
int nents, size_t length, gfp_t mem_flags)
return interpret_urb_result(chip, pipe, length, result,
chip->usb->current_sg.bytes);
}
-#if 0
-static int rts51x_bulk_transfer_sglist_partial(struct rts51x_chip *chip,
- unsigned int pipe, void *buf, struct scatterlist **sgptr,
- unsigned int *offset, int num_sg, unsigned int length,
- unsigned int *act_len, int timeout)
-{
- int result;
- /* don't submit s-g requests during abort processing */
- if (test_bit(FLIDX_ABORTING, &chip->usb->dflags))
- TRACE_RET(chip, STATUS_ERROR);
-
- /* initialize the scatter-gather request block */
- RTS51X_DEBUGP("%s: xfer %u bytes, %d entries\n", __func__,
- length, num_sg);
- result = rts51x_sg_init_partial(&chip->usb->current_sg,
- chip->usb->pusb_dev, pipe, 0, buf, sgptr, offset,
- num_sg, length, GFP_NOIO);
- if (result) {
- RTS51X_DEBUGP("rts51x_sg_init_partial returned %d\n", result);
- TRACE_RET(chip, STATUS_ERROR);
- }
-
- /* since the block has been initialized successfully, it's now
- * okay to cancel it */
- set_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags);
-
- /* did an abort occur during the submission? */
- if (test_bit(FLIDX_ABORTING, &chip->usb->dflags)) {
-
- /* cancel the request, if it hasn't been cancelled already */
- if (test_and_clear_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags)) {
- RTS51X_DEBUGP("-- cancelling sg request\n");
- usb_sg_cancel(&chip->usb->current_sg);
- }
- }
-
- /* wait for the completion of the transfer */
- result = rts51x_sg_wait(&chip->usb->current_sg, timeout);
-
- clear_bit(FLIDX_SG_ACTIVE, &chip->usb->dflags);
-
- /* result = us->current_sg.status; */
- if (act_len)
- *act_len = chip->usb->current_sg.bytes;
- return interpret_urb_result(chip, pipe, length, result,
- chip->usb->current_sg.bytes);
-}
-#endif
int rts51x_bulk_transfer_buf(struct rts51x_chip *chip, unsigned int pipe,
void *buf, unsigned int length,
unsigned int *act_len, int timeout)
}
kfree(tmp_buf);
-#if 0
- result = rts51x_bulk_transfer_sglist_partial(chip, pipe, buf,
- (struct scatterlist **)ptr, offset,
- use_sg, len, act_len, timeout);
-#endif
} else {
unsigned int step = 0;
if (offset)
projects / linux-2.6-microblaze.git / commitdiff