net: phy: aquantia: Add some additional phy interfaces

These are documented in the AQR115 register reference. I haven't tested
them, but perhaps they'll be useful to someone.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 7111e2e..61e3e94 100644 (file)
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -27,9 +27,12 @@
 #define MDIO_PHYXS_VEND_IF_STATUS              0xe812
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK    GENMASK(7, 3)
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR      0
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX      1
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI     2
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII 3
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI    4
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII   6
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI   7
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
 
 #define MDIO_AN_VEND_PROV                      0xc400
@@ -401,15 +404,24 @@ static int aqr107_read_status(struct phy_device *phydev)
        case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
                phydev->interface = PHY_INTERFACE_MODE_10GKR;
                break;
+       case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+               phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+               break;
        case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
                phydev->interface = PHY_INTERFACE_MODE_10GBASER;
                break;
        case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
                phydev->interface = PHY_INTERFACE_MODE_USXGMII;
                break;
+       case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+               phydev->interface = PHY_INTERFACE_MODE_XAUI;
+               break;
        case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
                phydev->interface = PHY_INTERFACE_MODE_SGMII;
                break;
+       case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+               phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+               break;
        case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
                phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
                break;
@@ -522,11 +534,14 @@ static int aqr107_config_init(struct phy_device *phydev)
 
        /* Check that the PHY interface type is compatible */
        if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+           phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
            phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
            phydev->interface != PHY_INTERFACE_MODE_XGMII &&
            phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
            phydev->interface != PHY_INTERFACE_MODE_10GKR &&
-           phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+           phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+           phydev->interface != PHY_INTERFACE_MODE_XAUI &&
+           phydev->interface != PHY_INTERFACE_MODE_RXAUI)
                return -ENODEV;
 
        WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,