[ISDN] HiSax netjet_u: split setup into 3 smaller functions
authorJeff Garzik <jeff@garzik.org>
Sun, 15 Jul 2007 20:59:01 +0000 (16:59 -0400)
committerJeff Garzik <jeff@garzik.org>
Tue, 17 Jul 2007 21:21:37 +0000 (17:21 -0400)
No behavior changes, just code movement.  Prep for PCI hotplug API.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/isdn/hisax/nj_u.c

index 8202cf3..f017d38 100644 (file)
@@ -128,93 +128,69 @@ NETjet_U_card_msg(struct IsdnCardState *cs, int mt, void *arg)
        return(0);
 }
 
-static struct pci_dev *dev_netjet __devinitdata = NULL;
-
-int __devinit
-setup_netjet_u(struct IsdnCard *card)
+static int __devinit nju_pci_probe(struct pci_dev *dev_netjet,
+                                  struct IsdnCardState *cs)
 {
-       int bytecnt;
-       struct IsdnCardState *cs = card->cs;
-       char tmp[64];
-#ifdef CONFIG_PCI
-#endif
-#ifdef __BIG_ENDIAN
-#error "not running on big endian machines now"
-#endif
-       strcpy(tmp, NETjet_U_revision);
-       printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp));
-       if (cs->typ != ISDN_CTYPE_NETJET_U)
+       if (pci_enable_device(dev_netjet))
                return(0);
-       test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
-
-#ifdef CONFIG_PCI
+       pci_set_master(dev_netjet);
+       cs->irq = dev_netjet->irq;
+       if (!cs->irq) {
+               printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n");
+               return(0);
+       }
+       cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
+       if (!cs->hw.njet.base) {
+               printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n");
+               return(0);
+       }
 
-       for ( ;; )
-       {
-               if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
-                       PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
-                       if (pci_enable_device(dev_netjet))
-                               return(0);
-                       pci_set_master(dev_netjet);
-                       cs->irq = dev_netjet->irq;
-                       if (!cs->irq) {
-                               printk(KERN_WARNING "NETspider-U: No IRQ for PCI card found\n");
-                               return(0);
-                       }
-                       cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
-                       if (!cs->hw.njet.base) {
-                               printk(KERN_WARNING "NETspider-U: No IO-Adr for PCI card found\n");
-                               return(0);
-                       }
-               } else {
-                       printk(KERN_WARNING "NETspider-U: No PCI card found\n");
-                       return(0);
-               }
+       return (1);
+}
 
-               cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
-               cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
-               mdelay(10);
+static int __devinit nju_cs_init(struct IsdnCard *card,
+                                struct IsdnCardState *cs)
+{
+       cs->hw.njet.auxa = cs->hw.njet.base + NETJET_AUXDATA;
+       cs->hw.njet.isac = cs->hw.njet.base | NETJET_ISAC_OFF;
+       mdelay(10);
 
-               cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
-               byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
-               mdelay(10);
+       cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
+       byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+       mdelay(10);
 
-               cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
-               byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
-               mdelay(10);
+       cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
+       byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
+       mdelay(10);
 
-               cs->hw.njet.auxd = 0xC0;
-               cs->hw.njet.dmactrl = 0;
+       cs->hw.njet.auxd = 0xC0;
+       cs->hw.njet.dmactrl = 0;
 
-               byteout(cs->hw.njet.auxa, 0);
-               byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
-               byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
-               byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
+       byteout(cs->hw.njet.auxa, 0);
+       byteout(cs->hw.njet.base + NETJET_AUXCTRL, ~NETJET_ISACIRQ);
+       byteout(cs->hw.njet.base + NETJET_IRQMASK1, NETJET_ISACIRQ);
+       byteout(cs->hw.njet.auxa, cs->hw.njet.auxd);
 
-               switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) )
-               {
-                       case 3 :
-                               break;
+       switch ( ( ( NETjet_ReadIC( cs, ICC_RBCH ) >> 5 ) & 3 ) )
+       {
+               case 3 :
+                       return 1;       /* end loop */
 
-                       case 0 :
-                               printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" );
-                               continue;
+               case 0 :
+                       printk( KERN_WARNING "NETspider-U: NETjet-S PCI card found\n" );
+                       return -1;      /* continue looping */
 
-                       default :
-                               printk( KERN_WARNING "NETspider-U: No PCI card found\n" );
-                               return 0;
-                }
-                break;
+               default :
+                       printk( KERN_WARNING "NETspider-U: No PCI card found\n" );
+                       return 0;       /* end loop & function */
        }
-#else
-
-       printk(KERN_WARNING "NETspider-U: NO_PCI_BIOS\n");
-       printk(KERN_WARNING "NETspider-U: unable to config NETspider-U PCI\n");
-       return (0);
-
-#endif /* CONFIG_PCI */
+       return 1;                       /* end loop */
+}
 
-       bytecnt = 256;
+static int __devinit nju_cs_init_rest(struct IsdnCard *card,
+                                     struct IsdnCardState *cs)
+{
+       const int bytecnt = 256;
 
        printk(KERN_INFO
                "NETspider-U: PCI card configured at %#lx IRQ %d\n",
@@ -239,5 +215,48 @@ setup_netjet_u(struct IsdnCard *card)
        cs->irq_func = &netjet_u_interrupt;
        cs->irq_flags |= IRQF_SHARED;
        ICCVersion(cs, "NETspider-U:");
+
        return (1);
 }
+
+static struct pci_dev *dev_netjet __devinitdata = NULL;
+
+int __devinit
+setup_netjet_u(struct IsdnCard *card)
+{
+       int ret;
+       struct IsdnCardState *cs = card->cs;
+       char tmp[64];
+
+#ifdef __BIG_ENDIAN
+#error "not running on big endian machines now"
+#endif
+
+       strcpy(tmp, NETjet_U_revision);
+       printk(KERN_INFO "HiSax: Traverse Tech. NETspider-U driver Rev. %s\n", HiSax_getrev(tmp));
+       if (cs->typ != ISDN_CTYPE_NETJET_U)
+               return(0);
+       test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
+
+       for ( ;; )
+       {
+               if ((dev_netjet = pci_find_device(PCI_VENDOR_ID_TIGERJET,
+                       PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
+                       ret = nju_pci_probe(dev_netjet, cs);
+                       if (!ret)
+                               return(0);
+               } else {
+                       printk(KERN_WARNING "NETspider-U: No PCI card found\n");
+                       return(0);
+               }
+
+               ret = nju_cs_init(card, cs);
+               if (!ret)
+                       return (0);
+               if (ret > 0)
+                       break;
+               /* ret < 0 == continue looping */
+       }
+
+       return nju_cs_init_rest(card, cs);
+}