i915 yet don't support PSR in Apple panels, so lets keep it disabled
while we work on that.
v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to
DP_DPCD_QUIRK_NO_PSR (Ville)
v3:
Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani)
Fixed typo in comment of the new quirk entry(Jani)
Fixes:
598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-1-jose.souza@intel.com
{ OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
/* LG LP140WF6-SPM1 eDP panel */
{ OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), false, BIT(DP_DPCD_QUIRK_CONSTANT_N) },
+ /* Apple panels need some additional handling to support PSR */
+ { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) }
};
#undef OUI
DRM_DEBUG_KMS("eDP panel supports PSR version %x\n",
intel_dp->psr_dpcd[0]);
+ if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_NO_PSR)) {
+ DRM_DEBUG_KMS("PSR support not currently available for this panel\n");
+ return;
+ }
+
if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) {
DRM_DEBUG_KMS("Panel lacks power state control, PSR cannot be enabled\n");
return;
}
+
dev_priv->psr.sink_support = true;
dev_priv->psr.sink_sync_latency =
intel_dp_get_sink_sync_latency(intel_dp);
* to 16 bits. So will give a constant value (0x8000) for compatability.
*/
DP_DPCD_QUIRK_CONSTANT_N,
+ /**
+ * @DP_DPCD_QUIRK_NO_PSR
+ *
+ * The device does not support PSR even if reports that it supports or
+ * driver still need to implement proper handling for such device.
+ */
+ DP_DPCD_QUIRK_NO_PSR,
};
/**