-solo6x10-y := core.o i2c.o p2m.o v4l2.o tw28.o gpio.o disp.o enc.o v4l2-enc.o g723.o eeprom.o
+solo6x10-y := solo6x10-core.o solo6x10-i2c.o solo6x10-p2m.o solo6x10-v4l2.o \
+ solo6x10-tw28.o solo6x10-gpio.o solo6x10-disp.o solo6x10-enc.o \
+ solo6x10-v4l2-enc.o solo6x10-g723.o solo6x10-eeprom.o
obj-$(CONFIG_SOLO6X10) += solo6x10.o
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/videodev2.h>
-#include <linux/delay.h>
-#include <linux/sysfs.h>
-#include <linux/ktime.h>
-#include <linux/slab.h>
-
-#include "solo6x10.h"
-#include "solo6x10-tw28.h"
-
-MODULE_DESCRIPTION("Softlogic 6x10 MPEG4/H.264/G.723 CODEC V4L2/ALSA Driver");
-MODULE_AUTHOR("Bluecherry <maintainers@bluecherrydvr.com>");
-MODULE_VERSION(SOLO6X10_VERSION);
-MODULE_LICENSE("GPL");
-
-unsigned video_nr = -1;
-module_param(video_nr, uint, 0644);
-MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect (default)");
-
-static int full_eeprom; /* default is only top 64B */
-module_param(full_eeprom, uint, 0644);
-MODULE_PARM_DESC(full_eeprom, "Allow access to full 128B EEPROM (dangerous)");
-
-
-static void solo_set_time(struct solo_dev *solo_dev)
-{
- struct timespec ts;
-
- ktime_get_ts(&ts);
-
- solo_reg_write(solo_dev, SOLO_TIMER_SEC, ts.tv_sec);
- solo_reg_write(solo_dev, SOLO_TIMER_USEC, ts.tv_nsec / NSEC_PER_USEC);
-}
-
-static void solo_timer_sync(struct solo_dev *solo_dev)
-{
- u32 sec, usec;
- struct timespec ts;
- long diff;
-
- if (solo_dev->type != SOLO_DEV_6110)
- return;
-
- if (++solo_dev->time_sync < 60)
- return;
-
- solo_dev->time_sync = 0;
-
- sec = solo_reg_read(solo_dev, SOLO_TIMER_SEC);
- usec = solo_reg_read(solo_dev, SOLO_TIMER_USEC);
-
- ktime_get_ts(&ts);
-
- diff = (long)ts.tv_sec - (long)sec;
- diff = (diff * 1000000)
- + ((long)(ts.tv_nsec / NSEC_PER_USEC) - (long)usec);
-
- if (diff > 1000 || diff < -1000) {
- solo_set_time(solo_dev);
- } else if (diff) {
- long usec_lsb = solo_dev->usec_lsb;
-
- usec_lsb -= diff / 4;
- if (usec_lsb < 0)
- usec_lsb = 0;
- else if (usec_lsb > 255)
- usec_lsb = 255;
-
- solo_dev->usec_lsb = usec_lsb;
- solo_reg_write(solo_dev, SOLO_TIMER_USEC_LSB,
- solo_dev->usec_lsb);
- }
-}
-
-static irqreturn_t solo_isr(int irq, void *data)
-{
- struct solo_dev *solo_dev = data;
- u32 status;
- int i;
-
- status = solo_reg_read(solo_dev, SOLO_IRQ_STAT);
- if (!status)
- return IRQ_NONE;
-
- if (status & ~solo_dev->irq_mask) {
- solo_reg_write(solo_dev, SOLO_IRQ_STAT,
- status & ~solo_dev->irq_mask);
- status &= solo_dev->irq_mask;
- }
-
- if (status & SOLO_IRQ_PCI_ERR)
- solo_p2m_error_isr(solo_dev);
-
- for (i = 0; i < SOLO_NR_P2M; i++)
- if (status & SOLO_IRQ_P2M(i))
- solo_p2m_isr(solo_dev, i);
-
- if (status & SOLO_IRQ_IIC)
- solo_i2c_isr(solo_dev);
-
- if (status & SOLO_IRQ_VIDEO_IN) {
- solo_video_in_isr(solo_dev);
- solo_timer_sync(solo_dev);
- }
-
- if (status & SOLO_IRQ_ENCODER)
- solo_enc_v4l2_isr(solo_dev);
-
- if (status & SOLO_IRQ_G723)
- solo_g723_isr(solo_dev);
-
- /* Clear all interrupts handled */
- solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
-
- return IRQ_HANDLED;
-}
-
-static void free_solo_dev(struct solo_dev *solo_dev)
-{
- struct pci_dev *pdev;
-
- if (!solo_dev)
- return;
-
- if (solo_dev->dev.parent)
- device_unregister(&solo_dev->dev);
-
- pdev = solo_dev->pdev;
-
- /* If we never initialized the PCI device, then nothing else
- * below here needs cleanup */
- if (!pdev) {
- kfree(solo_dev);
- return;
- }
-
- if (solo_dev->reg_base) {
- /* Bring down the sub-devices first */
- solo_g723_exit(solo_dev);
- solo_enc_v4l2_exit(solo_dev);
- solo_enc_exit(solo_dev);
- solo_v4l2_exit(solo_dev);
- solo_disp_exit(solo_dev);
- solo_gpio_exit(solo_dev);
- solo_p2m_exit(solo_dev);
- solo_i2c_exit(solo_dev);
-
- /* Now cleanup the PCI device */
- solo_irq_off(solo_dev, ~0);
- pci_iounmap(pdev, solo_dev->reg_base);
- if (pdev->irq)
- free_irq(pdev->irq, solo_dev);
- }
-
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- v4l2_device_unregister(&solo_dev->v4l2_dev);
- pci_set_drvdata(pdev, NULL);
-
- kfree(solo_dev);
-}
-
-static ssize_t eeprom_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- unsigned short *p = (unsigned short *)buf;
- int i;
-
- if (count & 0x1)
- dev_warn(dev, "EEPROM Write not aligned (truncating)\n");
-
- if (!full_eeprom && count > 64) {
- dev_warn(dev, "EEPROM Write truncated to 64 bytes\n");
- count = 64;
- } else if (full_eeprom && count > 128) {
- dev_warn(dev, "EEPROM Write truncated to 128 bytes\n");
- count = 128;
- }
-
- solo_eeprom_ewen(solo_dev, 1);
-
- for (i = full_eeprom ? 0 : 32; i < min((int)(full_eeprom ? 64 : 32),
- (int)(count / 2)); i++)
- solo_eeprom_write(solo_dev, i, cpu_to_be16(p[i]));
-
- solo_eeprom_ewen(solo_dev, 0);
-
- return count;
-}
-
-static ssize_t eeprom_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- unsigned short *p = (unsigned short *)buf;
- int count = (full_eeprom ? 128 : 64);
- int i;
-
- for (i = (full_eeprom ? 0 : 32); i < (count / 2); i++)
- p[i] = be16_to_cpu(solo_eeprom_read(solo_dev, i));
-
- return count;
-}
-
-static ssize_t p2m_timeouts_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
-
- return sprintf(buf, "%d\n", solo_dev->p2m_timeouts);
-}
-
-static ssize_t sdram_size_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
-
- return sprintf(buf, "%dMegs\n", solo_dev->sdram_size >> 20);
-}
-
-static ssize_t tw28xx_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
-
- return sprintf(buf, "tw2815[%d] tw2864[%d] tw2865[%d]\n",
- hweight32(solo_dev->tw2815),
- hweight32(solo_dev->tw2864),
- hweight32(solo_dev->tw2865));
-}
-
-static ssize_t input_map_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- unsigned int val;
- char *out = buf;
-
- val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_0);
- out += sprintf(out, "Channel 0 => Input %d\n", val & 0x1f);
- out += sprintf(out, "Channel 1 => Input %d\n", (val >> 5) & 0x1f);
- out += sprintf(out, "Channel 2 => Input %d\n", (val >> 10) & 0x1f);
- out += sprintf(out, "Channel 3 => Input %d\n", (val >> 15) & 0x1f);
- out += sprintf(out, "Channel 4 => Input %d\n", (val >> 20) & 0x1f);
- out += sprintf(out, "Channel 5 => Input %d\n", (val >> 25) & 0x1f);
-
- val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_1);
- out += sprintf(out, "Channel 6 => Input %d\n", val & 0x1f);
- out += sprintf(out, "Channel 7 => Input %d\n", (val >> 5) & 0x1f);
- out += sprintf(out, "Channel 8 => Input %d\n", (val >> 10) & 0x1f);
- out += sprintf(out, "Channel 9 => Input %d\n", (val >> 15) & 0x1f);
- out += sprintf(out, "Channel 10 => Input %d\n", (val >> 20) & 0x1f);
- out += sprintf(out, "Channel 11 => Input %d\n", (val >> 25) & 0x1f);
-
- val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_2);
- out += sprintf(out, "Channel 12 => Input %d\n", val & 0x1f);
- out += sprintf(out, "Channel 13 => Input %d\n", (val >> 5) & 0x1f);
- out += sprintf(out, "Channel 14 => Input %d\n", (val >> 10) & 0x1f);
- out += sprintf(out, "Channel 15 => Input %d\n", (val >> 15) & 0x1f);
- out += sprintf(out, "Spot Output => Input %d\n", (val >> 20) & 0x1f);
-
- return out - buf;
-}
-
-static ssize_t p2m_timeout_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- unsigned long ms;
-
- int ret = kstrtoul(buf, 10, &ms);
- if (ret < 0 || ms > 200)
- return -EINVAL;
- solo_dev->p2m_jiffies = msecs_to_jiffies(ms);
-
- return count;
-}
-
-static ssize_t p2m_timeout_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
-
- return sprintf(buf, "%ums\n", jiffies_to_msecs(solo_dev->p2m_jiffies));
-}
-
-static ssize_t intervals_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- char *out = buf;
- int fps = solo_dev->fps;
- int i;
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- out += sprintf(out, "Channel %d: %d/%d (0x%08x)\n",
- i, solo_dev->v4l2_enc[i]->interval, fps,
- solo_reg_read(solo_dev, SOLO_CAP_CH_INTV(i)));
- }
-
- return out - buf;
-}
-
-static ssize_t sdram_offsets_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- char *out = buf;
-
- out += sprintf(out, "DISP: 0x%08x @ 0x%08x\n",
- SOLO_DISP_EXT_ADDR,
- SOLO_DISP_EXT_SIZE);
-
- out += sprintf(out, "EOSD: 0x%08x @ 0x%08x (0x%08x * %d)\n",
- SOLO_EOSD_EXT_ADDR,
- SOLO_EOSD_EXT_AREA(solo_dev),
- SOLO_EOSD_EXT_SIZE(solo_dev),
- SOLO_EOSD_EXT_AREA(solo_dev) /
- SOLO_EOSD_EXT_SIZE(solo_dev));
-
- out += sprintf(out, "MOTI: 0x%08x @ 0x%08x\n",
- SOLO_MOTION_EXT_ADDR(solo_dev),
- SOLO_MOTION_EXT_SIZE);
-
- out += sprintf(out, "G723: 0x%08x @ 0x%08x\n",
- SOLO_G723_EXT_ADDR(solo_dev),
- SOLO_G723_EXT_SIZE);
-
- out += sprintf(out, "CAPT: 0x%08x @ 0x%08x (0x%08x * %d)\n",
- SOLO_CAP_EXT_ADDR(solo_dev),
- SOLO_CAP_EXT_SIZE(solo_dev),
- SOLO_CAP_PAGE_SIZE,
- SOLO_CAP_EXT_SIZE(solo_dev) / SOLO_CAP_PAGE_SIZE);
-
- out += sprintf(out, "EREF: 0x%08x @ 0x%08x (0x%08x * %d)\n",
- SOLO_EREF_EXT_ADDR(solo_dev),
- SOLO_EREF_EXT_AREA(solo_dev),
- SOLO_EREF_EXT_SIZE,
- SOLO_EREF_EXT_AREA(solo_dev) / SOLO_EREF_EXT_SIZE);
-
- out += sprintf(out, "MPEG: 0x%08x @ 0x%08x\n",
- SOLO_MP4E_EXT_ADDR(solo_dev),
- SOLO_MP4E_EXT_SIZE(solo_dev));
-
- out += sprintf(out, "JPEG: 0x%08x @ 0x%08x\n",
- SOLO_JPEG_EXT_ADDR(solo_dev),
- SOLO_JPEG_EXT_SIZE(solo_dev));
-
- return out - buf;
-}
-
-static ssize_t sdram_show(struct file *file, struct kobject *kobj,
- struct bin_attribute *a, char *buf,
- loff_t off, size_t count)
-{
- struct device *dev = container_of(kobj, struct device, kobj);
- struct solo_dev *solo_dev =
- container_of(dev, struct solo_dev, dev);
- const int size = solo_dev->sdram_size;
-
- if (off >= size)
- return 0;
-
- if (off + count > size)
- count = size - off;
-
- if (solo_p2m_dma(solo_dev, 0, buf, off, count, 0, 0))
- return -EIO;
-
- return count;
-}
-
-static const struct device_attribute solo_dev_attrs[] = {
- __ATTR(eeprom, 0640, eeprom_show, eeprom_store),
- __ATTR(p2m_timeout, 0644, p2m_timeout_show, p2m_timeout_store),
- __ATTR_RO(p2m_timeouts),
- __ATTR_RO(sdram_size),
- __ATTR_RO(tw28xx),
- __ATTR_RO(input_map),
- __ATTR_RO(intervals),
- __ATTR_RO(sdram_offsets),
-};
-
-static void solo_device_release(struct device *dev)
-{
- /* Do nothing */
-}
-
-static int solo_sysfs_init(struct solo_dev *solo_dev)
-{
- struct bin_attribute *sdram_attr = &solo_dev->sdram_attr;
- struct device *dev = &solo_dev->dev;
- const char *driver;
- int i;
-
- if (solo_dev->type == SOLO_DEV_6110)
- driver = "solo6110";
- else
- driver = "solo6010";
-
- dev->release = solo_device_release;
- dev->parent = &solo_dev->pdev->dev;
- set_dev_node(dev, dev_to_node(&solo_dev->pdev->dev));
- dev_set_name(dev, "%s-%d-%d", driver, solo_dev->vfd->num,
- solo_dev->nr_chans);
-
- if (device_register(dev)) {
- dev->parent = NULL;
- return -ENOMEM;
- }
-
- for (i = 0; i < ARRAY_SIZE(solo_dev_attrs); i++) {
- if (device_create_file(dev, &solo_dev_attrs[i])) {
- device_unregister(dev);
- return -ENOMEM;
- }
- }
-
- sysfs_attr_init(&sdram_attr->attr);
- sdram_attr->attr.name = "sdram";
- sdram_attr->attr.mode = 0440;
- sdram_attr->read = sdram_show;
- sdram_attr->size = solo_dev->sdram_size;
-
- if (device_create_bin_file(dev, sdram_attr)) {
- device_unregister(dev);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static int solo_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct solo_dev *solo_dev;
- int ret;
- u8 chip_id;
-
- solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL);
- if (solo_dev == NULL)
- return -ENOMEM;
-
- if (id->driver_data == SOLO_DEV_6010)
- dev_info(&pdev->dev, "Probing Softlogic 6010\n");
- else
- dev_info(&pdev->dev, "Probing Softlogic 6110\n");
-
- solo_dev->type = id->driver_data;
- solo_dev->pdev = pdev;
- spin_lock_init(&solo_dev->reg_io_lock);
- ret = v4l2_device_register(&pdev->dev, &solo_dev->v4l2_dev);
- if (ret)
- goto fail_probe;
-
- /* Only for during init */
- solo_dev->p2m_jiffies = msecs_to_jiffies(100);
-
- ret = pci_enable_device(pdev);
- if (ret)
- goto fail_probe;
-
- pci_set_master(pdev);
-
- /* RETRY/TRDY Timeout disabled */
- pci_write_config_byte(pdev, 0x40, 0x00);
- pci_write_config_byte(pdev, 0x41, 0x00);
-
- ret = pci_request_regions(pdev, SOLO6X10_NAME);
- if (ret)
- goto fail_probe;
-
- solo_dev->reg_base = pci_ioremap_bar(pdev, 0);
- if (solo_dev->reg_base == NULL) {
- ret = -ENOMEM;
- goto fail_probe;
- }
-
- chip_id = solo_reg_read(solo_dev, SOLO_CHIP_OPTION) &
- SOLO_CHIP_ID_MASK;
- switch (chip_id) {
- case 7:
- solo_dev->nr_chans = 16;
- solo_dev->nr_ext = 5;
- break;
- case 6:
- solo_dev->nr_chans = 8;
- solo_dev->nr_ext = 2;
- break;
- default:
- dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, assuming 4 ch\n",
- chip_id);
- case 5:
- solo_dev->nr_chans = 4;
- solo_dev->nr_ext = 1;
- }
-
- /* Disable all interrupts to start */
- solo_irq_off(solo_dev, ~0);
-
- /* Initial global settings */
- if (solo_dev->type == SOLO_DEV_6010) {
- solo_dev->clock_mhz = 108;
- solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT
- | SOLO_SYS_CFG_INPUTDIV(25)
- | SOLO_SYS_CFG_FEEDBACKDIV(solo_dev->clock_mhz * 2 - 2)
- | SOLO_SYS_CFG_OUTDIV(3);
- solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
- } else {
- u32 divq, divf;
-
- solo_dev->clock_mhz = 135;
-
- if (solo_dev->clock_mhz < 125) {
- divq = 3;
- divf = (solo_dev->clock_mhz * 4) / 3 - 1;
- } else {
- divq = 2;
- divf = (solo_dev->clock_mhz * 2) / 3 - 1;
- }
-
- solo_reg_write(solo_dev, SOLO_PLL_CONFIG,
- (1 << 20) | /* PLL_RANGE */
- (8 << 15) | /* PLL_DIVR */
- (divq << 12) |
- (divf << 4) |
- (1 << 1) /* PLL_FSEN */);
-
- solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT;
- }
-
- solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
- solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM,
- solo_dev->clock_mhz - 1);
-
- /* PLL locking time of 1ms */
- mdelay(1);
-
- ret = request_irq(pdev->irq, solo_isr, IRQF_SHARED, SOLO6X10_NAME,
- solo_dev);
- if (ret)
- goto fail_probe;
-
- /* Handle this from the start */
- solo_irq_on(solo_dev, SOLO_IRQ_PCI_ERR);
-
- ret = solo_i2c_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- /* Setup the DMA engine */
- solo_reg_write(solo_dev, SOLO_DMA_CTRL,
- SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
- SOLO_DMA_CTRL_SDRAM_SIZE(2) |
- SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
- SOLO_DMA_CTRL_READ_CLK_SELECT |
- SOLO_DMA_CTRL_LATENCY(1));
-
- /* Undocumented crap */
- solo_reg_write(solo_dev, SOLO_DMA_CTRL1,
- solo_dev->type == SOLO_DEV_6010 ? 0x100 : 0x300);
-
- if (solo_dev->type != SOLO_DEV_6010) {
- solo_dev->usec_lsb = 0x3f;
- solo_set_time(solo_dev);
- }
-
- /* Disable watchdog */
- solo_reg_write(solo_dev, SOLO_WATCHDOG, 0);
-
- /* Initialize sub components */
-
- ret = solo_p2m_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_disp_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_gpio_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_tw28_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_v4l2_init(solo_dev, video_nr);
- if (ret)
- goto fail_probe;
-
- ret = solo_enc_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_enc_v4l2_init(solo_dev, video_nr);
- if (ret)
- goto fail_probe;
-
- ret = solo_g723_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- ret = solo_sysfs_init(solo_dev);
- if (ret)
- goto fail_probe;
-
- /* Now that init is over, set this lower */
- solo_dev->p2m_jiffies = msecs_to_jiffies(20);
-
- return 0;
-
-fail_probe:
- free_solo_dev(solo_dev);
- return ret;
-}
-
-static void solo_pci_remove(struct pci_dev *pdev)
-{
- struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
- struct solo_dev *solo_dev = container_of(v4l2_dev, struct solo_dev, v4l2_dev);
-
- free_solo_dev(solo_dev);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(solo_id_table) = {
- /* 6010 based cards */
- { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_4),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_9),
- .driver_data = SOLO_DEV_6010 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_16),
- .driver_data = SOLO_DEV_6010 },
- /* 6110 based cards */
- { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6110),
- .driver_data = SOLO_DEV_6110 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_4),
- .driver_data = SOLO_DEV_6110 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_8),
- .driver_data = SOLO_DEV_6110 },
- { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_16),
- .driver_data = SOLO_DEV_6110 },
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, solo_id_table);
-
-static struct pci_driver solo_pci_driver = {
- .name = SOLO6X10_NAME,
- .id_table = solo_id_table,
- .probe = solo_pci_probe,
- .remove = solo_pci_remove,
-};
-
-module_pci_driver(solo_pci_driver);
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/videodev2.h>
-#include <media/v4l2-ioctl.h>
-
-#include "solo6x10.h"
-
-#define SOLO_VCLK_DELAY 3
-#define SOLO_PROGRESSIVE_VSIZE 1024
-
-#define SOLO_MOT_THRESH_W 64
-#define SOLO_MOT_THRESH_H 64
-#define SOLO_MOT_THRESH_SIZE 8192
-#define SOLO_MOT_THRESH_REAL (SOLO_MOT_THRESH_W * SOLO_MOT_THRESH_H)
-#define SOLO_MOT_FLAG_SIZE 1024
-#define SOLO_MOT_FLAG_AREA (SOLO_MOT_FLAG_SIZE * 16)
-
-static void solo_vin_config(struct solo_dev *solo_dev)
-{
- solo_dev->vin_hstart = 8;
- solo_dev->vin_vstart = 2;
-
- solo_reg_write(solo_dev, SOLO_SYS_VCLK,
- SOLO_VCLK_SELECT(2) |
- SOLO_VCLK_VIN1415_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN1213_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN1011_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN0809_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN0607_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN0405_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN0203_DELAY(SOLO_VCLK_DELAY) |
- SOLO_VCLK_VIN0001_DELAY(SOLO_VCLK_DELAY));
-
- solo_reg_write(solo_dev, SOLO_VI_ACT_I_P,
- SOLO_VI_H_START(solo_dev->vin_hstart) |
- SOLO_VI_V_START(solo_dev->vin_vstart) |
- SOLO_VI_V_STOP(solo_dev->vin_vstart +
- solo_dev->video_vsize));
-
- solo_reg_write(solo_dev, SOLO_VI_ACT_I_S,
- SOLO_VI_H_START(solo_dev->vout_hstart) |
- SOLO_VI_V_START(solo_dev->vout_vstart) |
- SOLO_VI_V_STOP(solo_dev->vout_vstart +
- solo_dev->video_vsize));
-
- solo_reg_write(solo_dev, SOLO_VI_ACT_P,
- SOLO_VI_H_START(0) |
- SOLO_VI_V_START(1) |
- SOLO_VI_V_STOP(SOLO_PROGRESSIVE_VSIZE));
-
- solo_reg_write(solo_dev, SOLO_VI_CH_FORMAT,
- SOLO_VI_FD_SEL_MASK(0) | SOLO_VI_PROG_MASK(0));
-
- /* On 6110, initialize mozaic darkness stength */
- if (solo_dev->type == SOLO_DEV_6010)
- solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 0);
- else
- solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 16 << 22);
-
- solo_reg_write(solo_dev, SOLO_VI_PAGE_SW, 2);
-
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
- SOLO_VI_PB_USER_MODE);
- solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
- SOLO_VI_PB_HSIZE(858) | SOLO_VI_PB_VSIZE(246));
- solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
- SOLO_VI_PB_VSTART(4) |
- SOLO_VI_PB_VSTOP(4 + 240));
- } else {
- solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
- SOLO_VI_PB_USER_MODE | SOLO_VI_PB_PAL);
- solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
- SOLO_VI_PB_HSIZE(864) | SOLO_VI_PB_VSIZE(294));
- solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
- SOLO_VI_PB_VSTART(4) |
- SOLO_VI_PB_VSTOP(4 + 288));
- }
- solo_reg_write(solo_dev, SOLO_VI_PB_ACT_H, SOLO_VI_PB_HSTART(16) |
- SOLO_VI_PB_HSTOP(16 + 720));
-}
-
-static void solo_vout_config_cursor(struct solo_dev *dev)
-{
- int i;
-
- /* Load (blank) cursor bitmap mask (2bpp) */
- for (i = 0; i < 20; i++)
- solo_reg_write(dev, SOLO_VO_CURSOR_MASK(i), 0);
-
- solo_reg_write(dev, SOLO_VO_CURSOR_POS, 0);
-
- solo_reg_write(dev, SOLO_VO_CURSOR_CLR,
- (0x80 << 24) | (0x80 << 16) | (0x10 << 8) | 0x80);
- solo_reg_write(dev, SOLO_VO_CURSOR_CLR2, (0xe0 << 8) | 0x80);
-}
-
-static void solo_vout_config(struct solo_dev *solo_dev)
-{
- solo_dev->vout_hstart = 6;
- solo_dev->vout_vstart = 8;
-
- solo_reg_write(solo_dev, SOLO_VO_FMT_ENC,
- solo_dev->video_type |
- SOLO_VO_USER_COLOR_SET_NAV |
- SOLO_VO_USER_COLOR_SET_NAH |
- SOLO_VO_NA_COLOR_Y(0) |
- SOLO_VO_NA_COLOR_CB(0) |
- SOLO_VO_NA_COLOR_CR(0));
-
- solo_reg_write(solo_dev, SOLO_VO_ACT_H,
- SOLO_VO_H_START(solo_dev->vout_hstart) |
- SOLO_VO_H_STOP(solo_dev->vout_hstart +
- solo_dev->video_hsize));
-
- solo_reg_write(solo_dev, SOLO_VO_ACT_V,
- SOLO_VO_V_START(solo_dev->vout_vstart) |
- SOLO_VO_V_STOP(solo_dev->vout_vstart +
- solo_dev->video_vsize));
-
- solo_reg_write(solo_dev, SOLO_VO_RANGE_HV,
- SOLO_VO_H_LEN(solo_dev->video_hsize) |
- SOLO_VO_V_LEN(solo_dev->video_vsize));
-
- /* Border & background colors */
- solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_COLOR,
- (0xa0 << 24) | (0x88 << 16) | (0xa0 << 8) | 0x88);
- solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_COLOR,
- (0x10 << 24) | (0x8f << 16) | (0x10 << 8) | 0x8f);
- solo_reg_write(solo_dev, SOLO_VO_BKG_COLOR,
- (16 << 24) | (128 << 16) | (16 << 8) | 128);
-
- solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
-
- solo_reg_write(solo_dev, SOLO_VI_WIN_SW, 0);
-
- solo_reg_write(solo_dev, SOLO_VO_ZOOM_CTRL, 0);
- solo_reg_write(solo_dev, SOLO_VO_FREEZE_CTRL, 0);
-
- solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, SOLO_VO_DISP_ON |
- SOLO_VO_DISP_ERASE_COUNT(8) |
- SOLO_VO_DISP_BASE(SOLO_DISP_EXT_ADDR));
-
-
- solo_vout_config_cursor(solo_dev);
-
- /* Enable channels we support */
- solo_reg_write(solo_dev, SOLO_VI_CH_ENA,
- (1 << solo_dev->nr_chans) - 1);
-}
-
-static int solo_dma_vin_region(struct solo_dev *solo_dev, u32 off,
- u16 val, int reg_size)
-{
- u16 buf[64];
- int i;
- int ret = 0;
-
- for (i = 0; i < sizeof(buf) >> 1; i++)
- buf[i] = cpu_to_le16(val);
-
- for (i = 0; i < reg_size; i += sizeof(buf))
- ret |= solo_p2m_dma(solo_dev, 1, buf,
- SOLO_MOTION_EXT_ADDR(solo_dev) + off + i,
- sizeof(buf), 0, 0);
-
- return ret;
-}
-
-int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val)
-{
- if (ch > solo_dev->nr_chans)
- return -EINVAL;
-
- return solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
- (ch * SOLO_MOT_THRESH_SIZE * 2),
- val, SOLO_MOT_THRESH_SIZE);
-}
-
-int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch,
- const struct solo_motion_thresholds *thresholds)
-{
- u32 off = SOLO_MOT_FLAG_AREA + ch * SOLO_MOT_THRESH_SIZE * 2;
- u16 buf[SOLO_MOTION_SZ];
- int x, y;
- int ret = 0;
-
- for (y = 0; y < SOLO_MOTION_SZ; y++) {
- for (x = 0; x < SOLO_MOTION_SZ; x++)
- buf[x] = cpu_to_le16(thresholds->thresholds[y][x]);
- ret |= solo_p2m_dma(solo_dev, 1, buf,
- SOLO_MOTION_EXT_ADDR(solo_dev) + off + y * sizeof(buf),
- sizeof(buf), 0, 0);
- }
- return ret;
-}
-
-/* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k
- * threshold and working table for each channel. Atleast that's what the
- * spec says. However, this code (taken from rdk) has some mystery 8k
- * block right after the flag area, before the first thresh table. */
-static void solo_motion_config(struct solo_dev *solo_dev)
-{
- int i;
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- /* Clear motion flag area */
- solo_dma_vin_region(solo_dev, i * SOLO_MOT_FLAG_SIZE, 0x0000,
- SOLO_MOT_FLAG_SIZE);
-
- /* Clear working cache table */
- solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
- (i * SOLO_MOT_THRESH_SIZE * 2) +
- SOLO_MOT_THRESH_SIZE, 0x0000,
- SOLO_MOT_THRESH_SIZE);
-
- /* Set default threshold table */
- solo_set_motion_threshold(solo_dev, i, SOLO_DEF_MOT_THRESH);
- }
-
- /* Default motion settings */
- solo_reg_write(solo_dev, SOLO_VI_MOT_ADR, SOLO_VI_MOTION_EN(0) |
- (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
- solo_reg_write(solo_dev, SOLO_VI_MOT_CTRL,
- SOLO_VI_MOTION_FRAME_COUNT(3) |
- SOLO_VI_MOTION_SAMPLE_LENGTH(solo_dev->video_hsize / 16)
- /* | SOLO_VI_MOTION_INTR_START_STOP */
- | SOLO_VI_MOTION_SAMPLE_COUNT(10));
-
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
-}
-
-int solo_disp_init(struct solo_dev *solo_dev)
-{
- int i;
-
- solo_dev->video_hsize = 704;
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- solo_dev->video_vsize = 240;
- solo_dev->fps = 30;
- } else {
- solo_dev->video_vsize = 288;
- solo_dev->fps = 25;
- }
-
- solo_vin_config(solo_dev);
- solo_motion_config(solo_dev);
- solo_vout_config(solo_dev);
-
- for (i = 0; i < solo_dev->nr_chans; i++)
- solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 1);
-
- return 0;
-}
-
-void solo_disp_exit(struct solo_dev *solo_dev)
-{
- int i;
-
- solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, 0);
- solo_reg_write(solo_dev, SOLO_VO_ZOOM_CTRL, 0);
- solo_reg_write(solo_dev, SOLO_VO_FREEZE_CTRL, 0);
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(i), 0);
- solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(i), 0);
- solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 0);
- }
-
- /* Set default border */
- for (i = 0; i < 5; i++)
- solo_reg_write(solo_dev, SOLO_VO_BORDER_X(i), 0);
-
- for (i = 0; i < 5; i++)
- solo_reg_write(solo_dev, SOLO_VO_BORDER_Y(i), 0);
-
- solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_MASK, 0);
- solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_MASK, 0);
-
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(0), 0);
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(0), 0);
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(0), 0);
-
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(1), 0);
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(1), 0);
- solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(1), 0);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "solo6x10.h"
-
-/* Control */
-#define EE_SHIFT_CLK 0x04
-#define EE_CS 0x08
-#define EE_DATA_WRITE 0x02
-#define EE_DATA_READ 0x01
-#define EE_ENB (0x80 | EE_CS)
-
-#define eeprom_delay() udelay(100)
-#if 0
-#define eeprom_delay() solo_reg_read(solo_dev, SOLO_EEPROM_CTRL)
-#define eeprom_delay() ({ \
- int i, ret; \
- udelay(100); \
- for (i = ret = 0; i < 1000 && !ret; i++) \
- ret = solo_eeprom_reg_read(solo_dev); \
-})
-#endif
-#define ADDR_LEN 6
-
-/* Commands */
-#define EE_EWEN_CMD 4
-#define EE_EWDS_CMD 4
-#define EE_WRITE_CMD 5
-#define EE_READ_CMD 6
-#define EE_ERASE_CMD 7
-
-static unsigned int solo_eeprom_reg_read(struct solo_dev *solo_dev)
-{
- return solo_reg_read(solo_dev, SOLO_EEPROM_CTRL) & EE_DATA_READ;
-}
-
-static void solo_eeprom_reg_write(struct solo_dev *solo_dev, u32 data)
-{
- solo_reg_write(solo_dev, SOLO_EEPROM_CTRL, data);
- eeprom_delay();
-}
-
-static void solo_eeprom_cmd(struct solo_dev *solo_dev, int cmd)
-{
- int i;
-
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ACCESS_EN);
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
-
- for (i = 4 + ADDR_LEN; i >= 0; i--) {
- int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0;
-
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE | dataval);
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
- EE_SHIFT_CLK | dataval);
- }
-
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
-}
-
-unsigned int solo_eeprom_ewen(struct solo_dev *solo_dev, int w_en)
-{
- int ewen_cmd = (w_en ? 0x3f : 0) | (EE_EWEN_CMD << ADDR_LEN);
- unsigned int retval = 0;
- int i;
-
- solo_eeprom_cmd(solo_dev, ewen_cmd);
-
- for (i = 0; i < 16; i++) {
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
- EE_SHIFT_CLK);
- retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
- retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
- }
-
- solo_eeprom_reg_write(solo_dev, ~EE_CS);
- retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
-
- return retval;
-}
-
-unsigned short solo_eeprom_read(struct solo_dev *solo_dev, int loc)
-{
- int read_cmd = loc | (EE_READ_CMD << ADDR_LEN);
- unsigned short retval = 0;
- int i;
-
- solo_eeprom_cmd(solo_dev, read_cmd);
-
- for (i = 0; i < 16; i++) {
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
- EE_SHIFT_CLK);
- retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
- solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
- }
-
- solo_eeprom_reg_write(solo_dev, ~EE_CS);
-
- return retval;
-}
-
-int solo_eeprom_write(struct solo_dev *solo_dev, int loc,
- unsigned short data)
-{
- int write_cmd = loc | (EE_WRITE_CMD << ADDR_LEN);
- unsigned int retval;
- int i;
-
- solo_eeprom_cmd(solo_dev, write_cmd);
-
- for (i = 15; i >= 0; i--) {
- unsigned int dataval = (data >> i) & 1;
-
- solo_eeprom_reg_write(solo_dev, EE_ENB);
- solo_eeprom_reg_write(solo_dev,
- EE_ENB | (dataval << 1) | EE_SHIFT_CLK);
- }
-
- solo_eeprom_reg_write(solo_dev, EE_ENB);
- solo_eeprom_reg_write(solo_dev, ~EE_CS);
- solo_eeprom_reg_write(solo_dev, EE_ENB);
-
- for (i = retval = 0; i < 10000 && !retval; i++)
- retval = solo_eeprom_reg_read(solo_dev);
-
- solo_eeprom_reg_write(solo_dev, ~EE_CS);
-
- return !retval;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/font.h>
-#include <linux/bitrev.h>
-#include <linux/slab.h>
-
-#include "solo6x10.h"
-
-#define VI_PROG_HSIZE (1280 - 16)
-#define VI_PROG_VSIZE (1024 - 16)
-
-#define IRQ_LEVEL 2
-
-static void solo_capture_config(struct solo_dev *solo_dev)
-{
- unsigned long height;
- unsigned long width;
- void *buf;
- int i;
-
- solo_reg_write(solo_dev, SOLO_CAP_BASE,
- SOLO_CAP_MAX_PAGE((SOLO_CAP_EXT_SIZE(solo_dev)
- - SOLO_CAP_PAGE_SIZE) >> 16)
- | SOLO_CAP_BASE_ADDR(SOLO_CAP_EXT_ADDR(solo_dev) >> 16));
-
- /* XXX: Undocumented bits at b17 and b24 */
- if (solo_dev->type == SOLO_DEV_6110) {
- /* NOTE: Ref driver has (62 << 24) here as well, but it causes
- * wacked out frame timing on 4-port 6110. */
- solo_reg_write(solo_dev, SOLO_CAP_BTW,
- (1 << 17) | SOLO_CAP_PROG_BANDWIDTH(2) |
- SOLO_CAP_MAX_BANDWIDTH(36));
- } else {
- solo_reg_write(solo_dev, SOLO_CAP_BTW,
- (1 << 17) | SOLO_CAP_PROG_BANDWIDTH(2) |
- SOLO_CAP_MAX_BANDWIDTH(32));
- }
-
- /* Set scale 1, 9 dimension */
- width = solo_dev->video_hsize;
- height = solo_dev->video_vsize;
- solo_reg_write(solo_dev, SOLO_DIM_SCALE1,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Set scale 2, 10 dimension */
- width = solo_dev->video_hsize / 2;
- height = solo_dev->video_vsize;
- solo_reg_write(solo_dev, SOLO_DIM_SCALE2,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Set scale 3, 11 dimension */
- width = solo_dev->video_hsize / 2;
- height = solo_dev->video_vsize / 2;
- solo_reg_write(solo_dev, SOLO_DIM_SCALE3,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Set scale 4, 12 dimension */
- width = solo_dev->video_hsize / 3;
- height = solo_dev->video_vsize / 3;
- solo_reg_write(solo_dev, SOLO_DIM_SCALE4,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Set scale 5, 13 dimension */
- width = solo_dev->video_hsize / 4;
- height = solo_dev->video_vsize / 2;
- solo_reg_write(solo_dev, SOLO_DIM_SCALE5,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Progressive */
- width = VI_PROG_HSIZE;
- height = VI_PROG_VSIZE;
- solo_reg_write(solo_dev, SOLO_DIM_PROG,
- SOLO_DIM_H_MB_NUM(width / 16) |
- SOLO_DIM_V_MB_NUM_FRAME(height / 16) |
- SOLO_DIM_V_MB_NUM_FIELD(height / 16));
-
- /* Clear OSD */
- solo_reg_write(solo_dev, SOLO_VE_OSD_CH, 0);
- solo_reg_write(solo_dev, SOLO_VE_OSD_BASE, SOLO_EOSD_EXT_ADDR >> 16);
- solo_reg_write(solo_dev, SOLO_VE_OSD_CLR,
- 0xF0 << 16 | 0x80 << 8 | 0x80);
-
- if (solo_dev->type == SOLO_DEV_6010)
- solo_reg_write(solo_dev, SOLO_VE_OSD_OPT,
- SOLO_VE_OSD_H_SHADOW | SOLO_VE_OSD_V_SHADOW);
- else
- solo_reg_write(solo_dev, SOLO_VE_OSD_OPT, SOLO_VE_OSD_V_DOUBLE
- | SOLO_VE_OSD_H_SHADOW | SOLO_VE_OSD_V_SHADOW);
-
- /* Clear OSG buffer */
- buf = kzalloc(SOLO_EOSD_EXT_SIZE(solo_dev), GFP_KERNEL);
- if (!buf)
- return;
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_p2m_dma(solo_dev, 1, buf,
- SOLO_EOSD_EXT_ADDR +
- (SOLO_EOSD_EXT_SIZE(solo_dev) * i),
- SOLO_EOSD_EXT_SIZE(solo_dev), 0, 0);
- }
- kfree(buf);
-}
-
-/* Should be called with enable_lock held */
-int solo_osd_print(struct solo_enc_dev *solo_enc)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- unsigned char *str = solo_enc->osd_text;
- u8 *buf = solo_enc->osd_buf;
- u32 reg = solo_reg_read(solo_dev, SOLO_VE_OSD_CH);
- const struct font_desc *vga = find_font("VGA8x16");
- const unsigned char *vga_data;
- int len;
- int i, j;
-
- if (WARN_ON_ONCE(!vga))
- return -ENODEV;
-
- len = strlen(str);
-
- if (len == 0) {
- /* Disable OSD on this channel */
- reg &= ~(1 << solo_enc->ch);
- solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
- return 0;
- }
-
- memset(buf, 0, SOLO_EOSD_EXT_SIZE_MAX);
- vga_data = (const unsigned char *)vga->data;
-
- for (i = 0; i < len; i++) {
- unsigned char c = str[i];
-
- for (j = 0; j < 16; j++) {
- buf[(j * 2) + (i % 2) + (i / 2 * 32)] =
- bitrev8(vga_data[(c * 16) + j]);
- }
- }
-
- solo_p2m_dma(solo_dev, 1, buf,
- SOLO_EOSD_EXT_ADDR +
- (solo_enc->ch * SOLO_EOSD_EXT_SIZE(solo_dev)),
- SOLO_EOSD_EXT_SIZE(solo_dev), 0, 0);
-
- /* Enable OSD on this channel */
- reg |= (1 << solo_enc->ch);
- solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
-
- return 0;
-}
-
-/**
- * Set channel Quality Profile (0-3).
- */
-void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
- unsigned int qp)
-{
- unsigned long flags;
- unsigned int idx, reg;
-
- if ((ch > 31) || (qp > 3))
- return;
-
- if (solo_dev->type == SOLO_DEV_6010)
- return;
-
- if (ch < 16) {
- idx = 0;
- reg = SOLO_VE_JPEG_QP_CH_L;
- } else {
- ch -= 16;
- idx = 1;
- reg = SOLO_VE_JPEG_QP_CH_H;
- }
- ch *= 2;
-
- spin_lock_irqsave(&solo_dev->jpeg_qp_lock, flags);
-
- solo_dev->jpeg_qp[idx] &= ~(3 << ch);
- solo_dev->jpeg_qp[idx] |= (qp & 3) << ch;
-
- solo_reg_write(solo_dev, reg, solo_dev->jpeg_qp[idx]);
-
- spin_unlock_irqrestore(&solo_dev->jpeg_qp_lock, flags);
-}
-
-int solo_g_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch)
-{
- int idx;
-
- if (solo_dev->type == SOLO_DEV_6010)
- return 2;
-
- if (WARN_ON_ONCE(ch > 31))
- return 2;
-
- if (ch < 16) {
- idx = 0;
- } else {
- ch -= 16;
- idx = 1;
- }
- ch *= 2;
-
- return (solo_dev->jpeg_qp[idx] >> ch) & 3;
-}
-
-#define SOLO_QP_INIT 0xaaaaaaaa
-
-static void solo_jpeg_config(struct solo_dev *solo_dev)
-{
- if (solo_dev->type == SOLO_DEV_6010) {
- solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL,
- (2 << 24) | (2 << 16) | (2 << 8) | 2);
- } else {
- solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL,
- (4 << 24) | (3 << 16) | (2 << 8) | 1);
- }
-
- spin_lock_init(&solo_dev->jpeg_qp_lock);
-
- /* Initialize Quality Profile for all channels */
- solo_dev->jpeg_qp[0] = solo_dev->jpeg_qp[1] = SOLO_QP_INIT;
- solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_L, SOLO_QP_INIT);
- solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_H, SOLO_QP_INIT);
-
- solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG,
- (SOLO_JPEG_EXT_SIZE(solo_dev) & 0xffff0000) |
- ((SOLO_JPEG_EXT_ADDR(solo_dev) >> 16) & 0x0000ffff));
- solo_reg_write(solo_dev, SOLO_VE_JPEG_CTRL, 0xffffffff);
- if (solo_dev->type == SOLO_DEV_6110) {
- solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG1,
- (0 << 16) | (30 << 8) | 60);
- }
-}
-
-static void solo_mp4e_config(struct solo_dev *solo_dev)
-{
- int i;
- u32 cfg;
-
- solo_reg_write(solo_dev, SOLO_VE_CFG0,
- SOLO_VE_INTR_CTRL(IRQ_LEVEL) |
- SOLO_VE_BLOCK_SIZE(SOLO_MP4E_EXT_SIZE(solo_dev) >> 16) |
- SOLO_VE_BLOCK_BASE(SOLO_MP4E_EXT_ADDR(solo_dev) >> 16));
-
-
- cfg = SOLO_VE_BYTE_ALIGN(2) | SOLO_VE_INSERT_INDEX
- | SOLO_VE_MOTION_MODE(0);
- if (solo_dev->type != SOLO_DEV_6010) {
- cfg |= SOLO_VE_MPEG_SIZE_H(
- (SOLO_MP4E_EXT_SIZE(solo_dev) >> 24) & 0x0f);
- cfg |= SOLO_VE_JPEG_SIZE_H(
- (SOLO_JPEG_EXT_SIZE(solo_dev) >> 24) & 0x0f);
- }
- solo_reg_write(solo_dev, SOLO_VE_CFG1, cfg);
-
- solo_reg_write(solo_dev, SOLO_VE_WMRK_POLY, 0);
- solo_reg_write(solo_dev, SOLO_VE_VMRK_INIT_KEY, 0);
- solo_reg_write(solo_dev, SOLO_VE_WMRK_STRL, 0);
- if (solo_dev->type == SOLO_DEV_6110)
- solo_reg_write(solo_dev, SOLO_VE_WMRK_ENABLE, 0);
- solo_reg_write(solo_dev, SOLO_VE_ENCRYP_POLY, 0);
- solo_reg_write(solo_dev, SOLO_VE_ENCRYP_INIT, 0);
-
- solo_reg_write(solo_dev, SOLO_VE_ATTR,
- SOLO_VE_LITTLE_ENDIAN |
- SOLO_COMP_ATTR_FCODE(1) |
- SOLO_COMP_TIME_INC(0) |
- SOLO_COMP_TIME_WIDTH(15) |
- SOLO_DCT_INTERVAL(solo_dev->type == SOLO_DEV_6010 ? 9 : 10));
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE(i),
- (SOLO_EREF_EXT_ADDR(solo_dev) +
- (i * SOLO_EREF_EXT_SIZE)) >> 16);
- solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE_E(i),
- (SOLO_EREF_EXT_ADDR(solo_dev) +
- ((i + 16) * SOLO_EREF_EXT_SIZE)) >> 16);
- }
-
- if (solo_dev->type == SOLO_DEV_6110) {
- solo_reg_write(solo_dev, SOLO_VE_COMPT_MOT, 0x00040008);
- } else {
- for (i = 0; i < solo_dev->nr_chans; i++)
- solo_reg_write(solo_dev, SOLO_VE_CH_MOT(i), 0x100);
- }
-}
-
-int solo_enc_init(struct solo_dev *solo_dev)
-{
- int i;
-
- solo_capture_config(solo_dev);
- solo_mp4e_config(solo_dev);
- solo_jpeg_config(solo_dev);
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
- solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
- }
-
- return 0;
-}
-
-void solo_enc_exit(struct solo_dev *solo_dev)
-{
- int i;
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
- solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mempool.h>
-#include <linux/poll.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/control.h>
-
-#include "solo6x10.h"
-#include "solo6x10-tw28.h"
-
-#define G723_FDMA_PAGES 32
-#define G723_PERIOD_BYTES 48
-#define G723_PERIOD_BLOCK 1024
-#define G723_FRAMES_PER_PAGE 48
-
-/* Sets up channels 16-19 for decoding and 0-15 for encoding */
-#define OUTMODE_MASK 0x300
-
-#define SAMPLERATE 8000
-#define BITRATE 25
-
-/* The solo writes to 1k byte pages, 32 pages, in the dma. Each 1k page
- * is broken down to 20 * 48 byte regions (one for each channel possible)
- * with the rest of the page being dummy data. */
-#define G723_MAX_BUFFER (G723_PERIOD_BYTES * PERIODS_MAX)
-#define G723_INTR_ORDER 4 /* 0 - 4 */
-#define PERIODS_MIN (1 << G723_INTR_ORDER)
-#define PERIODS_MAX G723_FDMA_PAGES
-
-struct solo_snd_pcm {
- int on;
- spinlock_t lock;
- struct solo_dev *solo_dev;
- unsigned char *g723_buf;
- dma_addr_t g723_dma;
-};
-
-static void solo_g723_config(struct solo_dev *solo_dev)
-{
- int clk_div;
-
- clk_div = (solo_dev->clock_mhz * 1000000)
- / (SAMPLERATE * (BITRATE * 2) * 2);
-
- solo_reg_write(solo_dev, SOLO_AUDIO_SAMPLE,
- SOLO_AUDIO_BITRATE(BITRATE)
- | SOLO_AUDIO_CLK_DIV(clk_div));
-
- solo_reg_write(solo_dev, SOLO_AUDIO_FDMA_INTR,
- SOLO_AUDIO_FDMA_INTERVAL(1)
- | SOLO_AUDIO_INTR_ORDER(G723_INTR_ORDER)
- | SOLO_AUDIO_FDMA_BASE(SOLO_G723_EXT_ADDR(solo_dev) >> 16));
-
- solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL,
- SOLO_AUDIO_ENABLE
- | SOLO_AUDIO_I2S_MODE
- | SOLO_AUDIO_I2S_MULTI(3)
- | SOLO_AUDIO_MODE(OUTMODE_MASK));
-}
-
-void solo_g723_isr(struct solo_dev *solo_dev)
-{
- struct snd_pcm_str *pstr =
- &solo_dev->snd_pcm->streams[SNDRV_PCM_STREAM_CAPTURE];
- struct snd_pcm_substream *ss;
- struct solo_snd_pcm *solo_pcm;
-
- for (ss = pstr->substream; ss != NULL; ss = ss->next) {
- if (snd_pcm_substream_chip(ss) == NULL)
- continue;
-
- /* This means open() hasn't been called on this one */
- if (snd_pcm_substream_chip(ss) == solo_dev)
- continue;
-
- /* Haven't triggered a start yet */
- solo_pcm = snd_pcm_substream_chip(ss);
- if (!solo_pcm->on)
- continue;
-
- snd_pcm_period_elapsed(ss);
- }
-}
-
-static int snd_solo_hw_params(struct snd_pcm_substream *ss,
- struct snd_pcm_hw_params *hw_params)
-{
- return snd_pcm_lib_malloc_pages(ss, params_buffer_bytes(hw_params));
-}
-
-static int snd_solo_hw_free(struct snd_pcm_substream *ss)
-{
- return snd_pcm_lib_free_pages(ss);
-}
-
-static const struct snd_pcm_hardware snd_solo_pcm_hw = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
- .formats = SNDRV_PCM_FMTBIT_U8,
- .rates = SNDRV_PCM_RATE_8000,
- .rate_min = SAMPLERATE,
- .rate_max = SAMPLERATE,
- .channels_min = 1,
- .channels_max = 1,
- .buffer_bytes_max = G723_MAX_BUFFER,
- .period_bytes_min = G723_PERIOD_BYTES,
- .period_bytes_max = G723_PERIOD_BYTES,
- .periods_min = PERIODS_MIN,
- .periods_max = PERIODS_MAX,
-};
-
-static int snd_solo_pcm_open(struct snd_pcm_substream *ss)
-{
- struct solo_dev *solo_dev = snd_pcm_substream_chip(ss);
- struct solo_snd_pcm *solo_pcm;
-
- solo_pcm = kzalloc(sizeof(*solo_pcm), GFP_KERNEL);
- if (solo_pcm == NULL)
- goto oom;
-
- solo_pcm->g723_buf = pci_alloc_consistent(solo_dev->pdev,
- G723_PERIOD_BYTES,
- &solo_pcm->g723_dma);
- if (solo_pcm->g723_buf == NULL)
- goto oom;
-
- spin_lock_init(&solo_pcm->lock);
- solo_pcm->solo_dev = solo_dev;
- ss->runtime->hw = snd_solo_pcm_hw;
-
- snd_pcm_substream_chip(ss) = solo_pcm;
-
- return 0;
-
-oom:
- kfree(solo_pcm);
- return -ENOMEM;
-}
-
-static int snd_solo_pcm_close(struct snd_pcm_substream *ss)
-{
- struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
-
- snd_pcm_substream_chip(ss) = solo_pcm->solo_dev;
- pci_free_consistent(solo_pcm->solo_dev->pdev, G723_PERIOD_BYTES,
- solo_pcm->g723_buf, solo_pcm->g723_dma);
- kfree(solo_pcm);
-
- return 0;
-}
-
-static int snd_solo_pcm_trigger(struct snd_pcm_substream *ss, int cmd)
-{
- struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
- struct solo_dev *solo_dev = solo_pcm->solo_dev;
- int ret = 0;
-
- spin_lock(&solo_pcm->lock);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- if (solo_pcm->on == 0) {
- /* If this is the first user, switch on interrupts */
- if (atomic_inc_return(&solo_dev->snd_users) == 1)
- solo_irq_on(solo_dev, SOLO_IRQ_G723);
- solo_pcm->on = 1;
- }
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- if (solo_pcm->on) {
- /* If this was our last user, switch them off */
- if (atomic_dec_return(&solo_dev->snd_users) == 0)
- solo_irq_off(solo_dev, SOLO_IRQ_G723);
- solo_pcm->on = 0;
- }
- break;
- default:
- ret = -EINVAL;
- }
-
- spin_unlock(&solo_pcm->lock);
-
- return ret;
-}
-
-static int snd_solo_pcm_prepare(struct snd_pcm_substream *ss)
-{
- return 0;
-}
-
-static snd_pcm_uframes_t snd_solo_pcm_pointer(struct snd_pcm_substream *ss)
-{
- struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
- struct solo_dev *solo_dev = solo_pcm->solo_dev;
- snd_pcm_uframes_t idx = solo_reg_read(solo_dev, SOLO_AUDIO_STA) & 0x1f;
-
- return idx * G723_FRAMES_PER_PAGE;
-}
-
-static int snd_solo_pcm_copy(struct snd_pcm_substream *ss, int channel,
- snd_pcm_uframes_t pos, void __user *dst,
- snd_pcm_uframes_t count)
-{
- struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
- struct solo_dev *solo_dev = solo_pcm->solo_dev;
- int err, i;
-
- for (i = 0; i < (count / G723_FRAMES_PER_PAGE); i++) {
- int page = (pos / G723_FRAMES_PER_PAGE) + i;
-
- err = solo_p2m_dma_t(solo_dev, 0, solo_pcm->g723_dma,
- SOLO_G723_EXT_ADDR(solo_dev) +
- (page * G723_PERIOD_BLOCK) +
- (ss->number * G723_PERIOD_BYTES),
- G723_PERIOD_BYTES, 0, 0);
- if (err)
- return err;
-
- err = copy_to_user(dst + (i * G723_PERIOD_BYTES),
- solo_pcm->g723_buf, G723_PERIOD_BYTES);
-
- if (err)
- return -EFAULT;
- }
-
- return 0;
-}
-
-static struct snd_pcm_ops snd_solo_pcm_ops = {
- .open = snd_solo_pcm_open,
- .close = snd_solo_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_solo_hw_params,
- .hw_free = snd_solo_hw_free,
- .prepare = snd_solo_pcm_prepare,
- .trigger = snd_solo_pcm_trigger,
- .pointer = snd_solo_pcm_pointer,
- .copy = snd_solo_pcm_copy,
-};
-
-static int snd_solo_capture_volume_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *info)
-{
- info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- info->count = 1;
- info->value.integer.min = 0;
- info->value.integer.max = 15;
- info->value.integer.step = 1;
-
- return 0;
-}
-
-static int snd_solo_capture_volume_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol);
- u8 ch = value->id.numid - 1;
-
- value->value.integer.value[0] = tw28_get_audio_gain(solo_dev, ch);
-
- return 0;
-}
-
-static int snd_solo_capture_volume_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol);
- u8 ch = value->id.numid - 1;
- u8 old_val;
-
- old_val = tw28_get_audio_gain(solo_dev, ch);
- if (old_val == value->value.integer.value[0])
- return 0;
-
- tw28_set_audio_gain(solo_dev, ch, value->value.integer.value[0]);
-
- return 1;
-}
-
-static struct snd_kcontrol_new snd_solo_capture_volume = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Volume",
- .info = snd_solo_capture_volume_info,
- .get = snd_solo_capture_volume_get,
- .put = snd_solo_capture_volume_put,
-};
-
-static int solo_snd_pcm_init(struct solo_dev *solo_dev)
-{
- struct snd_card *card = solo_dev->snd_card;
- struct snd_pcm *pcm;
- struct snd_pcm_substream *ss;
- int ret;
- int i;
-
- ret = snd_pcm_new(card, card->driver, 0, 0, solo_dev->nr_chans,
- &pcm);
- if (ret < 0)
- return ret;
-
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
- &snd_solo_pcm_ops);
-
- snd_pcm_chip(pcm) = solo_dev;
- pcm->info_flags = 0;
- strcpy(pcm->name, card->shortname);
-
- for (i = 0, ss = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
- ss; ss = ss->next, i++)
- sprintf(ss->name, "Camera #%d Audio", i);
-
- ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- G723_MAX_BUFFER, G723_MAX_BUFFER);
- if (ret < 0)
- return ret;
-
- solo_dev->snd_pcm = pcm;
-
- return 0;
-}
-
-int solo_g723_init(struct solo_dev *solo_dev)
-{
- static struct snd_device_ops ops = { NULL };
- struct snd_card *card;
- struct snd_kcontrol_new kctl;
- char name[32];
- int ret;
-
- atomic_set(&solo_dev->snd_users, 0);
-
- /* Allows for easier mapping between video and audio */
- sprintf(name, "Softlogic%d", solo_dev->vfd->num);
-
- ret = snd_card_create(SNDRV_DEFAULT_IDX1, name, THIS_MODULE, 0,
- &solo_dev->snd_card);
- if (ret < 0)
- return ret;
-
- card = solo_dev->snd_card;
-
- strcpy(card->driver, SOLO6X10_NAME);
- strcpy(card->shortname, "SOLO-6x10 Audio");
- sprintf(card->longname, "%s on %s IRQ %d", card->shortname,
- pci_name(solo_dev->pdev), solo_dev->pdev->irq);
- snd_card_set_dev(card, &solo_dev->pdev->dev);
-
- ret = snd_device_new(card, SNDRV_DEV_LOWLEVEL, solo_dev, &ops);
- if (ret < 0)
- goto snd_error;
-
- /* Mixer controls */
- strcpy(card->mixername, "SOLO-6x10");
- kctl = snd_solo_capture_volume;
- kctl.count = solo_dev->nr_chans;
-
- ret = snd_ctl_add(card, snd_ctl_new1(&kctl, solo_dev));
- if (ret < 0)
- return ret;
-
- ret = solo_snd_pcm_init(solo_dev);
- if (ret < 0)
- goto snd_error;
-
- ret = snd_card_register(card);
- if (ret < 0)
- goto snd_error;
-
- solo_g723_config(solo_dev);
-
- dev_info(&solo_dev->pdev->dev, "Alsa sound card as %s\n", name);
-
- return 0;
-
-snd_error:
- snd_card_free(card);
- return ret;
-}
-
-void solo_g723_exit(struct solo_dev *solo_dev)
-{
- if (!solo_dev->snd_card)
- return;
-
- solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL, 0);
- solo_irq_off(solo_dev, SOLO_IRQ_G723);
-
- snd_card_free(solo_dev->snd_card);
- solo_dev->snd_card = NULL;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-
-#include "solo6x10.h"
-
-static void solo_gpio_mode(struct solo_dev *solo_dev,
- unsigned int port_mask, unsigned int mode)
-{
- int port;
- unsigned int ret;
-
- ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_0);
-
- /* To set gpio */
- for (port = 0; port < 16; port++) {
- if (!((1 << port) & port_mask))
- continue;
-
- ret &= (~(3 << (port << 1)));
- ret |= ((mode & 3) << (port << 1));
- }
-
- solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_0, ret);
-
- /* To set extended gpio - sensor */
- ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_1);
-
- for (port = 0; port < 16; port++) {
- if (!((1 << (port + 16)) & port_mask))
- continue;
-
- if (!mode)
- ret &= ~(1 << port);
- else
- ret |= 1 << port;
- }
-
- solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_1, ret);
-}
-
-static void solo_gpio_set(struct solo_dev *solo_dev, unsigned int value)
-{
- solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
- solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) | value);
-}
-
-static void solo_gpio_clear(struct solo_dev *solo_dev, unsigned int value)
-{
- solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
- solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) & ~value);
-}
-
-static void solo_gpio_config(struct solo_dev *solo_dev)
-{
- /* Video reset */
- solo_gpio_mode(solo_dev, 0x30, 1);
- solo_gpio_clear(solo_dev, 0x30);
- udelay(100);
- solo_gpio_set(solo_dev, 0x30);
- udelay(100);
-
- /* Warning: Don't touch the next line unless you're sure of what
- * you're doing: first four gpio [0-3] are used for video. */
- solo_gpio_mode(solo_dev, 0x0f, 2);
-
- /* We use bit 8-15 of SOLO_GPIO_CONFIG_0 for relay purposes */
- solo_gpio_mode(solo_dev, 0xff00, 1);
-
- /* Initially set relay status to 0 */
- solo_gpio_clear(solo_dev, 0xff00);
-}
-
-int solo_gpio_init(struct solo_dev *solo_dev)
-{
- solo_gpio_config(solo_dev);
- return 0;
-}
-
-void solo_gpio_exit(struct solo_dev *solo_dev)
-{
- solo_gpio_clear(solo_dev, 0x30);
- solo_gpio_config(solo_dev);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/* XXX: The SOLO6x10 i2c does not have separate interrupts for each i2c
- * channel. The bus can only handle one i2c event at a time. The below handles
- * this all wrong. We should be using the status registers to see if the bus
- * is in use, and have a global lock to check the status register. Also,
- * the bulk of the work should be handled out-of-interrupt. The ugly loops
- * that occur during interrupt scare me. The ISR should merely signal
- * thread context, ACK the interrupt, and move on. -- BenC */
-
-#include <linux/kernel.h>
-
-#include "solo6x10.h"
-
-u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off)
-{
- struct i2c_msg msgs[2];
- u8 data;
-
- msgs[0].flags = 0;
- msgs[0].addr = addr;
- msgs[0].len = 1;
- msgs[0].buf = &off;
-
- msgs[1].flags = I2C_M_RD;
- msgs[1].addr = addr;
- msgs[1].len = 1;
- msgs[1].buf = &data;
-
- i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2);
-
- return data;
-}
-
-void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr,
- u8 off, u8 data)
-{
- struct i2c_msg msgs;
- u8 buf[2];
-
- buf[0] = off;
- buf[1] = data;
- msgs.flags = 0;
- msgs.addr = addr;
- msgs.len = 2;
- msgs.buf = buf;
-
- i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1);
-}
-
-static void solo_i2c_flush(struct solo_dev *solo_dev, int wr)
-{
- u32 ctrl;
-
- ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id);
-
- if (solo_dev->i2c_state == IIC_STATE_START)
- ctrl |= SOLO_IIC_START;
-
- if (wr) {
- ctrl |= SOLO_IIC_WRITE;
- } else {
- ctrl |= SOLO_IIC_READ;
- if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK))
- ctrl |= SOLO_IIC_ACK_EN;
- }
-
- if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len)
- ctrl |= SOLO_IIC_STOP;
-
- solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl);
-}
-
-static void solo_i2c_start(struct solo_dev *solo_dev)
-{
- u32 addr = solo_dev->i2c_msg->addr << 1;
-
- if (solo_dev->i2c_msg->flags & I2C_M_RD)
- addr |= 1;
-
- solo_dev->i2c_state = IIC_STATE_START;
- solo_reg_write(solo_dev, SOLO_IIC_TXD, addr);
- solo_i2c_flush(solo_dev, 1);
-}
-
-static void solo_i2c_stop(struct solo_dev *solo_dev)
-{
- solo_irq_off(solo_dev, SOLO_IRQ_IIC);
- solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
- solo_dev->i2c_state = IIC_STATE_STOP;
- wake_up(&solo_dev->i2c_wait);
-}
-
-static int solo_i2c_handle_read(struct solo_dev *solo_dev)
-{
-prepare_read:
- if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
- solo_i2c_flush(solo_dev, 0);
- return 0;
- }
-
- solo_dev->i2c_msg_ptr = 0;
- solo_dev->i2c_msg++;
- solo_dev->i2c_msg_num--;
-
- if (solo_dev->i2c_msg_num == 0) {
- solo_i2c_stop(solo_dev);
- return 0;
- }
-
- if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
- solo_i2c_start(solo_dev);
- } else {
- if (solo_dev->i2c_msg->flags & I2C_M_RD)
- goto prepare_read;
- else
- solo_i2c_stop(solo_dev);
- }
-
- return 0;
-}
-
-static int solo_i2c_handle_write(struct solo_dev *solo_dev)
-{
-retry_write:
- if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
- solo_reg_write(solo_dev, SOLO_IIC_TXD,
- solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]);
- solo_dev->i2c_msg_ptr++;
- solo_i2c_flush(solo_dev, 1);
- return 0;
- }
-
- solo_dev->i2c_msg_ptr = 0;
- solo_dev->i2c_msg++;
- solo_dev->i2c_msg_num--;
-
- if (solo_dev->i2c_msg_num == 0) {
- solo_i2c_stop(solo_dev);
- return 0;
- }
-
- if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
- solo_i2c_start(solo_dev);
- } else {
- if (solo_dev->i2c_msg->flags & I2C_M_RD)
- solo_i2c_stop(solo_dev);
- else
- goto retry_write;
- }
-
- return 0;
-}
-
-int solo_i2c_isr(struct solo_dev *solo_dev)
-{
- u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL);
- int ret = -EINVAL;
-
-
- if (CHK_FLAGS(status, SOLO_IIC_STATE_TRNS | SOLO_IIC_STATE_SIG_ERR)
- || solo_dev->i2c_id < 0) {
- solo_i2c_stop(solo_dev);
- return -ENXIO;
- }
-
- switch (solo_dev->i2c_state) {
- case IIC_STATE_START:
- if (solo_dev->i2c_msg->flags & I2C_M_RD) {
- solo_dev->i2c_state = IIC_STATE_READ;
- ret = solo_i2c_handle_read(solo_dev);
- break;
- }
-
- solo_dev->i2c_state = IIC_STATE_WRITE;
- case IIC_STATE_WRITE:
- ret = solo_i2c_handle_write(solo_dev);
- break;
-
- case IIC_STATE_READ:
- solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] =
- solo_reg_read(solo_dev, SOLO_IIC_RXD);
- solo_dev->i2c_msg_ptr++;
-
- ret = solo_i2c_handle_read(solo_dev);
- break;
-
- default:
- solo_i2c_stop(solo_dev);
- }
-
- return ret;
-}
-
-static int solo_i2c_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg msgs[], int num)
-{
- struct solo_dev *solo_dev = adap->algo_data;
- unsigned long timeout;
- int ret;
- int i;
- DEFINE_WAIT(wait);
-
- for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
- if (&solo_dev->i2c_adap[i] == adap)
- break;
- }
-
- if (i == SOLO_I2C_ADAPTERS)
- return num; /* XXX Right return value for failure? */
-
- mutex_lock(&solo_dev->i2c_mutex);
- solo_dev->i2c_id = i;
- solo_dev->i2c_msg = msgs;
- solo_dev->i2c_msg_num = num;
- solo_dev->i2c_msg_ptr = 0;
-
- solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
- solo_irq_on(solo_dev, SOLO_IRQ_IIC);
- solo_i2c_start(solo_dev);
-
- timeout = HZ / 2;
-
- for (;;) {
- prepare_to_wait(&solo_dev->i2c_wait, &wait,
- TASK_INTERRUPTIBLE);
-
- if (solo_dev->i2c_state == IIC_STATE_STOP)
- break;
-
- timeout = schedule_timeout(timeout);
- if (!timeout)
- break;
-
- if (signal_pending(current))
- break;
- }
-
- finish_wait(&solo_dev->i2c_wait, &wait);
- ret = num - solo_dev->i2c_msg_num;
- solo_dev->i2c_state = IIC_STATE_IDLE;
- solo_dev->i2c_id = -1;
-
- mutex_unlock(&solo_dev->i2c_mutex);
-
- return ret;
-}
-
-static u32 solo_i2c_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_I2C;
-}
-
-static const struct i2c_algorithm solo_i2c_algo = {
- .master_xfer = solo_i2c_master_xfer,
- .functionality = solo_i2c_functionality,
-};
-
-int solo_i2c_init(struct solo_dev *solo_dev)
-{
- int i;
- int ret;
-
- solo_reg_write(solo_dev, SOLO_IIC_CFG,
- SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE);
-
- solo_dev->i2c_id = -1;
- solo_dev->i2c_state = IIC_STATE_IDLE;
- init_waitqueue_head(&solo_dev->i2c_wait);
- mutex_init(&solo_dev->i2c_mutex);
-
- for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
- struct i2c_adapter *adap = &solo_dev->i2c_adap[i];
-
- snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d",
- SOLO6X10_NAME, i);
- adap->algo = &solo_i2c_algo;
- adap->algo_data = solo_dev;
- adap->retries = 1;
- adap->dev.parent = &solo_dev->pdev->dev;
-
- ret = i2c_add_adapter(adap);
- if (ret) {
- adap->algo_data = NULL;
- break;
- }
- }
-
- if (ret) {
- for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
- if (!solo_dev->i2c_adap[i].algo_data)
- break;
- i2c_del_adapter(&solo_dev->i2c_adap[i]);
- solo_dev->i2c_adap[i].algo_data = NULL;
- }
- return ret;
- }
-
- return 0;
-}
-
-void solo_i2c_exit(struct solo_dev *solo_dev)
-{
- int i;
-
- for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
- if (!solo_dev->i2c_adap[i].algo_data)
- continue;
- i2c_del_adapter(&solo_dev->i2c_adap[i]);
- solo_dev->i2c_adap[i].algo_data = NULL;
- }
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "solo6x10.h"
-
-static int multi_p2m;
-module_param(multi_p2m, uint, 0644);
-MODULE_PARM_DESC(multi_p2m,
- "Use multiple P2M DMA channels (default: no, 6010-only)");
-
-static int desc_mode;
-module_param(desc_mode, uint, 0644);
-MODULE_PARM_DESC(desc_mode,
- "Allow use of descriptor mode DMA (default: no, 6010-only)");
-
-int solo_p2m_dma(struct solo_dev *solo_dev, int wr,
- void *sys_addr, u32 ext_addr, u32 size,
- int repeat, u32 ext_size)
-{
- dma_addr_t dma_addr;
- int ret;
-
- if (WARN_ON_ONCE((unsigned long)sys_addr & 0x03))
- return -EINVAL;
- if (WARN_ON_ONCE(!size))
- return -EINVAL;
-
- dma_addr = pci_map_single(solo_dev->pdev, sys_addr, size,
- wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
- if (pci_dma_mapping_error(solo_dev->pdev, dma_addr))
- return -ENOMEM;
-
- ret = solo_p2m_dma_t(solo_dev, wr, dma_addr, ext_addr, size,
- repeat, ext_size);
-
- pci_unmap_single(solo_dev->pdev, dma_addr, size,
- wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
-
- return ret;
-}
-
-/* Mutex must be held for p2m_id before calling this!! */
-int solo_p2m_dma_desc(struct solo_dev *solo_dev,
- struct solo_p2m_desc *desc, dma_addr_t desc_dma,
- int desc_cnt)
-{
- struct solo_p2m_dev *p2m_dev;
- unsigned int timeout;
- unsigned int config = 0;
- int ret = 0;
- int p2m_id = 0;
-
- /* Get next ID. According to Softlogic, 6110 has problems on !=0 P2M */
- if (solo_dev->type != SOLO_DEV_6110 && multi_p2m) {
- p2m_id = atomic_inc_return(&solo_dev->p2m_count) % SOLO_NR_P2M;
- if (p2m_id < 0)
- p2m_id = -p2m_id;
- }
-
- p2m_dev = &solo_dev->p2m_dev[p2m_id];
-
- if (mutex_lock_interruptible(&p2m_dev->mutex))
- return -EINTR;
-
- INIT_COMPLETION(p2m_dev->completion);
- p2m_dev->error = 0;
-
- if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && desc_mode) {
- /* For 6010 with more than one desc, we can do a one-shot */
- p2m_dev->desc_count = p2m_dev->desc_idx = 0;
- config = solo_reg_read(solo_dev, SOLO_P2M_CONFIG(p2m_id));
-
- solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(p2m_id), desc_dma);
- solo_reg_write(solo_dev, SOLO_P2M_DESC_ID(p2m_id), desc_cnt);
- solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config |
- SOLO_P2M_DESC_MODE);
- } else {
- /* For single descriptors and 6110, we need to run each desc */
- p2m_dev->desc_count = desc_cnt;
- p2m_dev->desc_idx = 1;
- p2m_dev->descs = desc;
-
- solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(p2m_id),
- desc[1].dma_addr);
- solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(p2m_id),
- desc[1].ext_addr);
- solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(p2m_id),
- desc[1].cfg);
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id),
- desc[1].ctrl);
- }
-
- timeout = wait_for_completion_timeout(&p2m_dev->completion,
- solo_dev->p2m_jiffies);
-
- if (WARN_ON_ONCE(p2m_dev->error))
- ret = -EIO;
- else if (timeout == 0) {
- solo_dev->p2m_timeouts++;
- ret = -EAGAIN;
- }
-
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id), 0);
-
- /* Don't write here for the no_desc_mode case, because config is 0.
- * We can't test no_desc_mode again, it might race. */
- if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && config)
- solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config);
-
- mutex_unlock(&p2m_dev->mutex);
-
- return ret;
-}
-
-void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr,
- dma_addr_t dma_addr, u32 ext_addr, u32 size,
- int repeat, u32 ext_size)
-{
- WARN_ON_ONCE(dma_addr & 0x03);
- WARN_ON_ONCE(!size);
-
- desc->cfg = SOLO_P2M_COPY_SIZE(size >> 2);
- desc->ctrl = SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) |
- (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON;
-
- if (repeat) {
- desc->cfg |= SOLO_P2M_EXT_INC(ext_size >> 2);
- desc->ctrl |= SOLO_P2M_PCI_INC(size >> 2) |
- SOLO_P2M_REPEAT(repeat);
- }
-
- desc->dma_addr = dma_addr;
- desc->ext_addr = ext_addr;
-}
-
-int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr,
- dma_addr_t dma_addr, u32 ext_addr, u32 size,
- int repeat, u32 ext_size)
-{
- struct solo_p2m_desc desc[2];
-
- solo_p2m_fill_desc(&desc[1], wr, dma_addr, ext_addr, size, repeat,
- ext_size);
-
- /* No need for desc_dma since we know it is a single-shot */
- return solo_p2m_dma_desc(solo_dev, desc, 0, 1);
-}
-
-void solo_p2m_isr(struct solo_dev *solo_dev, int id)
-{
- struct solo_p2m_dev *p2m_dev = &solo_dev->p2m_dev[id];
- struct solo_p2m_desc *desc;
-
- if (p2m_dev->desc_count <= p2m_dev->desc_idx) {
- complete(&p2m_dev->completion);
- return;
- }
-
- /* Setup next descriptor */
- p2m_dev->desc_idx++;
- desc = &p2m_dev->descs[p2m_dev->desc_idx];
-
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0);
- solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), desc->dma_addr);
- solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), desc->ext_addr);
- solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id), desc->cfg);
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), desc->ctrl);
-}
-
-void solo_p2m_error_isr(struct solo_dev *solo_dev)
-{
- unsigned int err = solo_reg_read(solo_dev, SOLO_PCI_ERR);
- struct solo_p2m_dev *p2m_dev;
- int i;
-
- if (!(err & (SOLO_PCI_ERR_P2M | SOLO_PCI_ERR_P2M_DESC)))
- return;
-
- for (i = 0; i < SOLO_NR_P2M; i++) {
- p2m_dev = &solo_dev->p2m_dev[i];
- p2m_dev->error = 1;
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
- complete(&p2m_dev->completion);
- }
-}
-
-void solo_p2m_exit(struct solo_dev *solo_dev)
-{
- int i;
-
- for (i = 0; i < SOLO_NR_P2M; i++)
- solo_irq_off(solo_dev, SOLO_IRQ_P2M(i));
-}
-
-static int solo_p2m_test(struct solo_dev *solo_dev, int base, int size)
-{
- u32 *wr_buf;
- u32 *rd_buf;
- int i;
- int ret = -EIO;
- int order = get_order(size);
-
- wr_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
- if (wr_buf == NULL)
- return -1;
-
- rd_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
- if (rd_buf == NULL) {
- free_pages((unsigned long)wr_buf, order);
- return -1;
- }
-
- for (i = 0; i < (size >> 3); i++)
- *(wr_buf + i) = (i << 16) | (i + 1);
-
- for (i = (size >> 3); i < (size >> 2); i++)
- *(wr_buf + i) = ~((i << 16) | (i + 1));
-
- memset(rd_buf, 0x55, size);
-
- if (solo_p2m_dma(solo_dev, 1, wr_buf, base, size, 0, 0))
- goto test_fail;
-
- if (solo_p2m_dma(solo_dev, 0, rd_buf, base, size, 0, 0))
- goto test_fail;
-
- for (i = 0; i < (size >> 2); i++) {
- if (*(wr_buf + i) != *(rd_buf + i))
- goto test_fail;
- }
-
- ret = 0;
-
-test_fail:
- free_pages((unsigned long)wr_buf, order);
- free_pages((unsigned long)rd_buf, order);
-
- return ret;
-}
-
-int solo_p2m_init(struct solo_dev *solo_dev)
-{
- struct solo_p2m_dev *p2m_dev;
- int i;
-
- for (i = 0; i < SOLO_NR_P2M; i++) {
- p2m_dev = &solo_dev->p2m_dev[i];
-
- mutex_init(&p2m_dev->mutex);
- init_completion(&p2m_dev->completion);
-
- solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
- solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i),
- SOLO_P2M_CSC_16BIT_565 |
- SOLO_P2M_DESC_INTR_OPT |
- SOLO_P2M_DMA_INTERVAL(0) |
- SOLO_P2M_PCI_MASTER_MODE);
- solo_irq_on(solo_dev, SOLO_IRQ_P2M(i));
- }
-
- /* Find correct SDRAM size */
- for (solo_dev->sdram_size = 0, i = 2; i >= 0; i--) {
- solo_reg_write(solo_dev, SOLO_DMA_CTRL,
- SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
- SOLO_DMA_CTRL_SDRAM_SIZE(i) |
- SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
- SOLO_DMA_CTRL_READ_CLK_SELECT |
- SOLO_DMA_CTRL_LATENCY(1));
-
- solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config |
- SOLO_SYS_CFG_RESET);
- solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
-
- switch (i) {
- case 2:
- if (solo_p2m_test(solo_dev, 0x07ff0000, 0x00010000) ||
- solo_p2m_test(solo_dev, 0x05ff0000, 0x00010000))
- continue;
- break;
-
- case 1:
- if (solo_p2m_test(solo_dev, 0x03ff0000, 0x00010000))
- continue;
- break;
-
- default:
- if (solo_p2m_test(solo_dev, 0x01ff0000, 0x00010000))
- continue;
- }
-
- solo_dev->sdram_size = (32 << 20) << i;
- break;
- }
-
- if (!solo_dev->sdram_size) {
- dev_err(&solo_dev->pdev->dev, "Error detecting SDRAM size\n");
- return -EIO;
- }
-
- if (SOLO_SDRAM_END(solo_dev) > solo_dev->sdram_size) {
- dev_err(&solo_dev->pdev->dev,
- "SDRAM is not large enough (%u < %u)\n",
- solo_dev->sdram_size, SOLO_SDRAM_END(solo_dev));
- return -EIO;
- }
-
- return 0;
-}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+
+#include "solo6x10.h"
+#include "solo6x10-tw28.h"
+
+MODULE_DESCRIPTION("Softlogic 6x10 MPEG4/H.264/G.723 CODEC V4L2/ALSA Driver");
+MODULE_AUTHOR("Bluecherry <maintainers@bluecherrydvr.com>");
+MODULE_VERSION(SOLO6X10_VERSION);
+MODULE_LICENSE("GPL");
+
+unsigned video_nr = -1;
+module_param(video_nr, uint, 0644);
+MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect (default)");
+
+static int full_eeprom; /* default is only top 64B */
+module_param(full_eeprom, uint, 0644);
+MODULE_PARM_DESC(full_eeprom, "Allow access to full 128B EEPROM (dangerous)");
+
+
+static void solo_set_time(struct solo_dev *solo_dev)
+{
+ struct timespec ts;
+
+ ktime_get_ts(&ts);
+
+ solo_reg_write(solo_dev, SOLO_TIMER_SEC, ts.tv_sec);
+ solo_reg_write(solo_dev, SOLO_TIMER_USEC, ts.tv_nsec / NSEC_PER_USEC);
+}
+
+static void solo_timer_sync(struct solo_dev *solo_dev)
+{
+ u32 sec, usec;
+ struct timespec ts;
+ long diff;
+
+ if (solo_dev->type != SOLO_DEV_6110)
+ return;
+
+ if (++solo_dev->time_sync < 60)
+ return;
+
+ solo_dev->time_sync = 0;
+
+ sec = solo_reg_read(solo_dev, SOLO_TIMER_SEC);
+ usec = solo_reg_read(solo_dev, SOLO_TIMER_USEC);
+
+ ktime_get_ts(&ts);
+
+ diff = (long)ts.tv_sec - (long)sec;
+ diff = (diff * 1000000)
+ + ((long)(ts.tv_nsec / NSEC_PER_USEC) - (long)usec);
+
+ if (diff > 1000 || diff < -1000) {
+ solo_set_time(solo_dev);
+ } else if (diff) {
+ long usec_lsb = solo_dev->usec_lsb;
+
+ usec_lsb -= diff / 4;
+ if (usec_lsb < 0)
+ usec_lsb = 0;
+ else if (usec_lsb > 255)
+ usec_lsb = 255;
+
+ solo_dev->usec_lsb = usec_lsb;
+ solo_reg_write(solo_dev, SOLO_TIMER_USEC_LSB,
+ solo_dev->usec_lsb);
+ }
+}
+
+static irqreturn_t solo_isr(int irq, void *data)
+{
+ struct solo_dev *solo_dev = data;
+ u32 status;
+ int i;
+
+ status = solo_reg_read(solo_dev, SOLO_IRQ_STAT);
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & ~solo_dev->irq_mask) {
+ solo_reg_write(solo_dev, SOLO_IRQ_STAT,
+ status & ~solo_dev->irq_mask);
+ status &= solo_dev->irq_mask;
+ }
+
+ if (status & SOLO_IRQ_PCI_ERR)
+ solo_p2m_error_isr(solo_dev);
+
+ for (i = 0; i < SOLO_NR_P2M; i++)
+ if (status & SOLO_IRQ_P2M(i))
+ solo_p2m_isr(solo_dev, i);
+
+ if (status & SOLO_IRQ_IIC)
+ solo_i2c_isr(solo_dev);
+
+ if (status & SOLO_IRQ_VIDEO_IN) {
+ solo_video_in_isr(solo_dev);
+ solo_timer_sync(solo_dev);
+ }
+
+ if (status & SOLO_IRQ_ENCODER)
+ solo_enc_v4l2_isr(solo_dev);
+
+ if (status & SOLO_IRQ_G723)
+ solo_g723_isr(solo_dev);
+
+ /* Clear all interrupts handled */
+ solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
+
+ return IRQ_HANDLED;
+}
+
+static void free_solo_dev(struct solo_dev *solo_dev)
+{
+ struct pci_dev *pdev;
+
+ if (!solo_dev)
+ return;
+
+ if (solo_dev->dev.parent)
+ device_unregister(&solo_dev->dev);
+
+ pdev = solo_dev->pdev;
+
+ /* If we never initialized the PCI device, then nothing else
+ * below here needs cleanup */
+ if (!pdev) {
+ kfree(solo_dev);
+ return;
+ }
+
+ if (solo_dev->reg_base) {
+ /* Bring down the sub-devices first */
+ solo_g723_exit(solo_dev);
+ solo_enc_v4l2_exit(solo_dev);
+ solo_enc_exit(solo_dev);
+ solo_v4l2_exit(solo_dev);
+ solo_disp_exit(solo_dev);
+ solo_gpio_exit(solo_dev);
+ solo_p2m_exit(solo_dev);
+ solo_i2c_exit(solo_dev);
+
+ /* Now cleanup the PCI device */
+ solo_irq_off(solo_dev, ~0);
+ pci_iounmap(pdev, solo_dev->reg_base);
+ if (pdev->irq)
+ free_irq(pdev->irq, solo_dev);
+ }
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ v4l2_device_unregister(&solo_dev->v4l2_dev);
+ pci_set_drvdata(pdev, NULL);
+
+ kfree(solo_dev);
+}
+
+static ssize_t eeprom_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ unsigned short *p = (unsigned short *)buf;
+ int i;
+
+ if (count & 0x1)
+ dev_warn(dev, "EEPROM Write not aligned (truncating)\n");
+
+ if (!full_eeprom && count > 64) {
+ dev_warn(dev, "EEPROM Write truncated to 64 bytes\n");
+ count = 64;
+ } else if (full_eeprom && count > 128) {
+ dev_warn(dev, "EEPROM Write truncated to 128 bytes\n");
+ count = 128;
+ }
+
+ solo_eeprom_ewen(solo_dev, 1);
+
+ for (i = full_eeprom ? 0 : 32; i < min((int)(full_eeprom ? 64 : 32),
+ (int)(count / 2)); i++)
+ solo_eeprom_write(solo_dev, i, cpu_to_be16(p[i]));
+
+ solo_eeprom_ewen(solo_dev, 0);
+
+ return count;
+}
+
+static ssize_t eeprom_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ unsigned short *p = (unsigned short *)buf;
+ int count = (full_eeprom ? 128 : 64);
+ int i;
+
+ for (i = (full_eeprom ? 0 : 32); i < (count / 2); i++)
+ p[i] = be16_to_cpu(solo_eeprom_read(solo_dev, i));
+
+ return count;
+}
+
+static ssize_t p2m_timeouts_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+
+ return sprintf(buf, "%d\n", solo_dev->p2m_timeouts);
+}
+
+static ssize_t sdram_size_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+
+ return sprintf(buf, "%dMegs\n", solo_dev->sdram_size >> 20);
+}
+
+static ssize_t tw28xx_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+
+ return sprintf(buf, "tw2815[%d] tw2864[%d] tw2865[%d]\n",
+ hweight32(solo_dev->tw2815),
+ hweight32(solo_dev->tw2864),
+ hweight32(solo_dev->tw2865));
+}
+
+static ssize_t input_map_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ unsigned int val;
+ char *out = buf;
+
+ val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_0);
+ out += sprintf(out, "Channel 0 => Input %d\n", val & 0x1f);
+ out += sprintf(out, "Channel 1 => Input %d\n", (val >> 5) & 0x1f);
+ out += sprintf(out, "Channel 2 => Input %d\n", (val >> 10) & 0x1f);
+ out += sprintf(out, "Channel 3 => Input %d\n", (val >> 15) & 0x1f);
+ out += sprintf(out, "Channel 4 => Input %d\n", (val >> 20) & 0x1f);
+ out += sprintf(out, "Channel 5 => Input %d\n", (val >> 25) & 0x1f);
+
+ val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_1);
+ out += sprintf(out, "Channel 6 => Input %d\n", val & 0x1f);
+ out += sprintf(out, "Channel 7 => Input %d\n", (val >> 5) & 0x1f);
+ out += sprintf(out, "Channel 8 => Input %d\n", (val >> 10) & 0x1f);
+ out += sprintf(out, "Channel 9 => Input %d\n", (val >> 15) & 0x1f);
+ out += sprintf(out, "Channel 10 => Input %d\n", (val >> 20) & 0x1f);
+ out += sprintf(out, "Channel 11 => Input %d\n", (val >> 25) & 0x1f);
+
+ val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_2);
+ out += sprintf(out, "Channel 12 => Input %d\n", val & 0x1f);
+ out += sprintf(out, "Channel 13 => Input %d\n", (val >> 5) & 0x1f);
+ out += sprintf(out, "Channel 14 => Input %d\n", (val >> 10) & 0x1f);
+ out += sprintf(out, "Channel 15 => Input %d\n", (val >> 15) & 0x1f);
+ out += sprintf(out, "Spot Output => Input %d\n", (val >> 20) & 0x1f);
+
+ return out - buf;
+}
+
+static ssize_t p2m_timeout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ unsigned long ms;
+
+ int ret = kstrtoul(buf, 10, &ms);
+ if (ret < 0 || ms > 200)
+ return -EINVAL;
+ solo_dev->p2m_jiffies = msecs_to_jiffies(ms);
+
+ return count;
+}
+
+static ssize_t p2m_timeout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+
+ return sprintf(buf, "%ums\n", jiffies_to_msecs(solo_dev->p2m_jiffies));
+}
+
+static ssize_t intervals_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ char *out = buf;
+ int fps = solo_dev->fps;
+ int i;
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ out += sprintf(out, "Channel %d: %d/%d (0x%08x)\n",
+ i, solo_dev->v4l2_enc[i]->interval, fps,
+ solo_reg_read(solo_dev, SOLO_CAP_CH_INTV(i)));
+ }
+
+ return out - buf;
+}
+
+static ssize_t sdram_offsets_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ char *out = buf;
+
+ out += sprintf(out, "DISP: 0x%08x @ 0x%08x\n",
+ SOLO_DISP_EXT_ADDR,
+ SOLO_DISP_EXT_SIZE);
+
+ out += sprintf(out, "EOSD: 0x%08x @ 0x%08x (0x%08x * %d)\n",
+ SOLO_EOSD_EXT_ADDR,
+ SOLO_EOSD_EXT_AREA(solo_dev),
+ SOLO_EOSD_EXT_SIZE(solo_dev),
+ SOLO_EOSD_EXT_AREA(solo_dev) /
+ SOLO_EOSD_EXT_SIZE(solo_dev));
+
+ out += sprintf(out, "MOTI: 0x%08x @ 0x%08x\n",
+ SOLO_MOTION_EXT_ADDR(solo_dev),
+ SOLO_MOTION_EXT_SIZE);
+
+ out += sprintf(out, "G723: 0x%08x @ 0x%08x\n",
+ SOLO_G723_EXT_ADDR(solo_dev),
+ SOLO_G723_EXT_SIZE);
+
+ out += sprintf(out, "CAPT: 0x%08x @ 0x%08x (0x%08x * %d)\n",
+ SOLO_CAP_EXT_ADDR(solo_dev),
+ SOLO_CAP_EXT_SIZE(solo_dev),
+ SOLO_CAP_PAGE_SIZE,
+ SOLO_CAP_EXT_SIZE(solo_dev) / SOLO_CAP_PAGE_SIZE);
+
+ out += sprintf(out, "EREF: 0x%08x @ 0x%08x (0x%08x * %d)\n",
+ SOLO_EREF_EXT_ADDR(solo_dev),
+ SOLO_EREF_EXT_AREA(solo_dev),
+ SOLO_EREF_EXT_SIZE,
+ SOLO_EREF_EXT_AREA(solo_dev) / SOLO_EREF_EXT_SIZE);
+
+ out += sprintf(out, "MPEG: 0x%08x @ 0x%08x\n",
+ SOLO_MP4E_EXT_ADDR(solo_dev),
+ SOLO_MP4E_EXT_SIZE(solo_dev));
+
+ out += sprintf(out, "JPEG: 0x%08x @ 0x%08x\n",
+ SOLO_JPEG_EXT_ADDR(solo_dev),
+ SOLO_JPEG_EXT_SIZE(solo_dev));
+
+ return out - buf;
+}
+
+static ssize_t sdram_show(struct file *file, struct kobject *kobj,
+ struct bin_attribute *a, char *buf,
+ loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct solo_dev *solo_dev =
+ container_of(dev, struct solo_dev, dev);
+ const int size = solo_dev->sdram_size;
+
+ if (off >= size)
+ return 0;
+
+ if (off + count > size)
+ count = size - off;
+
+ if (solo_p2m_dma(solo_dev, 0, buf, off, count, 0, 0))
+ return -EIO;
+
+ return count;
+}
+
+static const struct device_attribute solo_dev_attrs[] = {
+ __ATTR(eeprom, 0640, eeprom_show, eeprom_store),
+ __ATTR(p2m_timeout, 0644, p2m_timeout_show, p2m_timeout_store),
+ __ATTR_RO(p2m_timeouts),
+ __ATTR_RO(sdram_size),
+ __ATTR_RO(tw28xx),
+ __ATTR_RO(input_map),
+ __ATTR_RO(intervals),
+ __ATTR_RO(sdram_offsets),
+};
+
+static void solo_device_release(struct device *dev)
+{
+ /* Do nothing */
+}
+
+static int solo_sysfs_init(struct solo_dev *solo_dev)
+{
+ struct bin_attribute *sdram_attr = &solo_dev->sdram_attr;
+ struct device *dev = &solo_dev->dev;
+ const char *driver;
+ int i;
+
+ if (solo_dev->type == SOLO_DEV_6110)
+ driver = "solo6110";
+ else
+ driver = "solo6010";
+
+ dev->release = solo_device_release;
+ dev->parent = &solo_dev->pdev->dev;
+ set_dev_node(dev, dev_to_node(&solo_dev->pdev->dev));
+ dev_set_name(dev, "%s-%d-%d", driver, solo_dev->vfd->num,
+ solo_dev->nr_chans);
+
+ if (device_register(dev)) {
+ dev->parent = NULL;
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(solo_dev_attrs); i++) {
+ if (device_create_file(dev, &solo_dev_attrs[i])) {
+ device_unregister(dev);
+ return -ENOMEM;
+ }
+ }
+
+ sysfs_attr_init(&sdram_attr->attr);
+ sdram_attr->attr.name = "sdram";
+ sdram_attr->attr.mode = 0440;
+ sdram_attr->read = sdram_show;
+ sdram_attr->size = solo_dev->sdram_size;
+
+ if (device_create_bin_file(dev, sdram_attr)) {
+ device_unregister(dev);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int solo_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct solo_dev *solo_dev;
+ int ret;
+ u8 chip_id;
+
+ solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL);
+ if (solo_dev == NULL)
+ return -ENOMEM;
+
+ if (id->driver_data == SOLO_DEV_6010)
+ dev_info(&pdev->dev, "Probing Softlogic 6010\n");
+ else
+ dev_info(&pdev->dev, "Probing Softlogic 6110\n");
+
+ solo_dev->type = id->driver_data;
+ solo_dev->pdev = pdev;
+ spin_lock_init(&solo_dev->reg_io_lock);
+ ret = v4l2_device_register(&pdev->dev, &solo_dev->v4l2_dev);
+ if (ret)
+ goto fail_probe;
+
+ /* Only for during init */
+ solo_dev->p2m_jiffies = msecs_to_jiffies(100);
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ goto fail_probe;
+
+ pci_set_master(pdev);
+
+ /* RETRY/TRDY Timeout disabled */
+ pci_write_config_byte(pdev, 0x40, 0x00);
+ pci_write_config_byte(pdev, 0x41, 0x00);
+
+ ret = pci_request_regions(pdev, SOLO6X10_NAME);
+ if (ret)
+ goto fail_probe;
+
+ solo_dev->reg_base = pci_ioremap_bar(pdev, 0);
+ if (solo_dev->reg_base == NULL) {
+ ret = -ENOMEM;
+ goto fail_probe;
+ }
+
+ chip_id = solo_reg_read(solo_dev, SOLO_CHIP_OPTION) &
+ SOLO_CHIP_ID_MASK;
+ switch (chip_id) {
+ case 7:
+ solo_dev->nr_chans = 16;
+ solo_dev->nr_ext = 5;
+ break;
+ case 6:
+ solo_dev->nr_chans = 8;
+ solo_dev->nr_ext = 2;
+ break;
+ default:
+ dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, assuming 4 ch\n",
+ chip_id);
+ case 5:
+ solo_dev->nr_chans = 4;
+ solo_dev->nr_ext = 1;
+ }
+
+ /* Disable all interrupts to start */
+ solo_irq_off(solo_dev, ~0);
+
+ /* Initial global settings */
+ if (solo_dev->type == SOLO_DEV_6010) {
+ solo_dev->clock_mhz = 108;
+ solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT
+ | SOLO_SYS_CFG_INPUTDIV(25)
+ | SOLO_SYS_CFG_FEEDBACKDIV(solo_dev->clock_mhz * 2 - 2)
+ | SOLO_SYS_CFG_OUTDIV(3);
+ solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
+ } else {
+ u32 divq, divf;
+
+ solo_dev->clock_mhz = 135;
+
+ if (solo_dev->clock_mhz < 125) {
+ divq = 3;
+ divf = (solo_dev->clock_mhz * 4) / 3 - 1;
+ } else {
+ divq = 2;
+ divf = (solo_dev->clock_mhz * 2) / 3 - 1;
+ }
+
+ solo_reg_write(solo_dev, SOLO_PLL_CONFIG,
+ (1 << 20) | /* PLL_RANGE */
+ (8 << 15) | /* PLL_DIVR */
+ (divq << 12) |
+ (divf << 4) |
+ (1 << 1) /* PLL_FSEN */);
+
+ solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT;
+ }
+
+ solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
+ solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM,
+ solo_dev->clock_mhz - 1);
+
+ /* PLL locking time of 1ms */
+ mdelay(1);
+
+ ret = request_irq(pdev->irq, solo_isr, IRQF_SHARED, SOLO6X10_NAME,
+ solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ /* Handle this from the start */
+ solo_irq_on(solo_dev, SOLO_IRQ_PCI_ERR);
+
+ ret = solo_i2c_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ /* Setup the DMA engine */
+ solo_reg_write(solo_dev, SOLO_DMA_CTRL,
+ SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
+ SOLO_DMA_CTRL_SDRAM_SIZE(2) |
+ SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
+ SOLO_DMA_CTRL_READ_CLK_SELECT |
+ SOLO_DMA_CTRL_LATENCY(1));
+
+ /* Undocumented crap */
+ solo_reg_write(solo_dev, SOLO_DMA_CTRL1,
+ solo_dev->type == SOLO_DEV_6010 ? 0x100 : 0x300);
+
+ if (solo_dev->type != SOLO_DEV_6010) {
+ solo_dev->usec_lsb = 0x3f;
+ solo_set_time(solo_dev);
+ }
+
+ /* Disable watchdog */
+ solo_reg_write(solo_dev, SOLO_WATCHDOG, 0);
+
+ /* Initialize sub components */
+
+ ret = solo_p2m_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_disp_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_gpio_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_tw28_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_v4l2_init(solo_dev, video_nr);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_enc_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_enc_v4l2_init(solo_dev, video_nr);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_g723_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ ret = solo_sysfs_init(solo_dev);
+ if (ret)
+ goto fail_probe;
+
+ /* Now that init is over, set this lower */
+ solo_dev->p2m_jiffies = msecs_to_jiffies(20);
+
+ return 0;
+
+fail_probe:
+ free_solo_dev(solo_dev);
+ return ret;
+}
+
+static void solo_pci_remove(struct pci_dev *pdev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+ struct solo_dev *solo_dev = container_of(v4l2_dev, struct solo_dev, v4l2_dev);
+
+ free_solo_dev(solo_dev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(solo_id_table) = {
+ /* 6010 based cards */
+ { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_4),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_9),
+ .driver_data = SOLO_DEV_6010 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_16),
+ .driver_data = SOLO_DEV_6010 },
+ /* 6110 based cards */
+ { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6110),
+ .driver_data = SOLO_DEV_6110 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_4),
+ .driver_data = SOLO_DEV_6110 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_8),
+ .driver_data = SOLO_DEV_6110 },
+ { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_16),
+ .driver_data = SOLO_DEV_6110 },
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, solo_id_table);
+
+static struct pci_driver solo_pci_driver = {
+ .name = SOLO6X10_NAME,
+ .id_table = solo_id_table,
+ .probe = solo_pci_probe,
+ .remove = solo_pci_remove,
+};
+
+module_pci_driver(solo_pci_driver);
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ioctl.h>
+
+#include "solo6x10.h"
+
+#define SOLO_VCLK_DELAY 3
+#define SOLO_PROGRESSIVE_VSIZE 1024
+
+#define SOLO_MOT_THRESH_W 64
+#define SOLO_MOT_THRESH_H 64
+#define SOLO_MOT_THRESH_SIZE 8192
+#define SOLO_MOT_THRESH_REAL (SOLO_MOT_THRESH_W * SOLO_MOT_THRESH_H)
+#define SOLO_MOT_FLAG_SIZE 1024
+#define SOLO_MOT_FLAG_AREA (SOLO_MOT_FLAG_SIZE * 16)
+
+static void solo_vin_config(struct solo_dev *solo_dev)
+{
+ solo_dev->vin_hstart = 8;
+ solo_dev->vin_vstart = 2;
+
+ solo_reg_write(solo_dev, SOLO_SYS_VCLK,
+ SOLO_VCLK_SELECT(2) |
+ SOLO_VCLK_VIN1415_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN1213_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN1011_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN0809_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN0607_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN0405_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN0203_DELAY(SOLO_VCLK_DELAY) |
+ SOLO_VCLK_VIN0001_DELAY(SOLO_VCLK_DELAY));
+
+ solo_reg_write(solo_dev, SOLO_VI_ACT_I_P,
+ SOLO_VI_H_START(solo_dev->vin_hstart) |
+ SOLO_VI_V_START(solo_dev->vin_vstart) |
+ SOLO_VI_V_STOP(solo_dev->vin_vstart +
+ solo_dev->video_vsize));
+
+ solo_reg_write(solo_dev, SOLO_VI_ACT_I_S,
+ SOLO_VI_H_START(solo_dev->vout_hstart) |
+ SOLO_VI_V_START(solo_dev->vout_vstart) |
+ SOLO_VI_V_STOP(solo_dev->vout_vstart +
+ solo_dev->video_vsize));
+
+ solo_reg_write(solo_dev, SOLO_VI_ACT_P,
+ SOLO_VI_H_START(0) |
+ SOLO_VI_V_START(1) |
+ SOLO_VI_V_STOP(SOLO_PROGRESSIVE_VSIZE));
+
+ solo_reg_write(solo_dev, SOLO_VI_CH_FORMAT,
+ SOLO_VI_FD_SEL_MASK(0) | SOLO_VI_PROG_MASK(0));
+
+ /* On 6110, initialize mozaic darkness stength */
+ if (solo_dev->type == SOLO_DEV_6010)
+ solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 0);
+ else
+ solo_reg_write(solo_dev, SOLO_VI_FMT_CFG, 16 << 22);
+
+ solo_reg_write(solo_dev, SOLO_VI_PAGE_SW, 2);
+
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
+ SOLO_VI_PB_USER_MODE);
+ solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
+ SOLO_VI_PB_HSIZE(858) | SOLO_VI_PB_VSIZE(246));
+ solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
+ SOLO_VI_PB_VSTART(4) |
+ SOLO_VI_PB_VSTOP(4 + 240));
+ } else {
+ solo_reg_write(solo_dev, SOLO_VI_PB_CONFIG,
+ SOLO_VI_PB_USER_MODE | SOLO_VI_PB_PAL);
+ solo_reg_write(solo_dev, SOLO_VI_PB_RANGE_HV,
+ SOLO_VI_PB_HSIZE(864) | SOLO_VI_PB_VSIZE(294));
+ solo_reg_write(solo_dev, SOLO_VI_PB_ACT_V,
+ SOLO_VI_PB_VSTART(4) |
+ SOLO_VI_PB_VSTOP(4 + 288));
+ }
+ solo_reg_write(solo_dev, SOLO_VI_PB_ACT_H, SOLO_VI_PB_HSTART(16) |
+ SOLO_VI_PB_HSTOP(16 + 720));
+}
+
+static void solo_vout_config_cursor(struct solo_dev *dev)
+{
+ int i;
+
+ /* Load (blank) cursor bitmap mask (2bpp) */
+ for (i = 0; i < 20; i++)
+ solo_reg_write(dev, SOLO_VO_CURSOR_MASK(i), 0);
+
+ solo_reg_write(dev, SOLO_VO_CURSOR_POS, 0);
+
+ solo_reg_write(dev, SOLO_VO_CURSOR_CLR,
+ (0x80 << 24) | (0x80 << 16) | (0x10 << 8) | 0x80);
+ solo_reg_write(dev, SOLO_VO_CURSOR_CLR2, (0xe0 << 8) | 0x80);
+}
+
+static void solo_vout_config(struct solo_dev *solo_dev)
+{
+ solo_dev->vout_hstart = 6;
+ solo_dev->vout_vstart = 8;
+
+ solo_reg_write(solo_dev, SOLO_VO_FMT_ENC,
+ solo_dev->video_type |
+ SOLO_VO_USER_COLOR_SET_NAV |
+ SOLO_VO_USER_COLOR_SET_NAH |
+ SOLO_VO_NA_COLOR_Y(0) |
+ SOLO_VO_NA_COLOR_CB(0) |
+ SOLO_VO_NA_COLOR_CR(0));
+
+ solo_reg_write(solo_dev, SOLO_VO_ACT_H,
+ SOLO_VO_H_START(solo_dev->vout_hstart) |
+ SOLO_VO_H_STOP(solo_dev->vout_hstart +
+ solo_dev->video_hsize));
+
+ solo_reg_write(solo_dev, SOLO_VO_ACT_V,
+ SOLO_VO_V_START(solo_dev->vout_vstart) |
+ SOLO_VO_V_STOP(solo_dev->vout_vstart +
+ solo_dev->video_vsize));
+
+ solo_reg_write(solo_dev, SOLO_VO_RANGE_HV,
+ SOLO_VO_H_LEN(solo_dev->video_hsize) |
+ SOLO_VO_V_LEN(solo_dev->video_vsize));
+
+ /* Border & background colors */
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_COLOR,
+ (0xa0 << 24) | (0x88 << 16) | (0xa0 << 8) | 0x88);
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_COLOR,
+ (0x10 << 24) | (0x8f << 16) | (0x10 << 8) | 0x8f);
+ solo_reg_write(solo_dev, SOLO_VO_BKG_COLOR,
+ (16 << 24) | (128 << 16) | (16 << 8) | 128);
+
+ solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
+
+ solo_reg_write(solo_dev, SOLO_VI_WIN_SW, 0);
+
+ solo_reg_write(solo_dev, SOLO_VO_ZOOM_CTRL, 0);
+ solo_reg_write(solo_dev, SOLO_VO_FREEZE_CTRL, 0);
+
+ solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, SOLO_VO_DISP_ON |
+ SOLO_VO_DISP_ERASE_COUNT(8) |
+ SOLO_VO_DISP_BASE(SOLO_DISP_EXT_ADDR));
+
+
+ solo_vout_config_cursor(solo_dev);
+
+ /* Enable channels we support */
+ solo_reg_write(solo_dev, SOLO_VI_CH_ENA,
+ (1 << solo_dev->nr_chans) - 1);
+}
+
+static int solo_dma_vin_region(struct solo_dev *solo_dev, u32 off,
+ u16 val, int reg_size)
+{
+ u16 buf[64];
+ int i;
+ int ret = 0;
+
+ for (i = 0; i < sizeof(buf) >> 1; i++)
+ buf[i] = cpu_to_le16(val);
+
+ for (i = 0; i < reg_size; i += sizeof(buf))
+ ret |= solo_p2m_dma(solo_dev, 1, buf,
+ SOLO_MOTION_EXT_ADDR(solo_dev) + off + i,
+ sizeof(buf), 0, 0);
+
+ return ret;
+}
+
+int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val)
+{
+ if (ch > solo_dev->nr_chans)
+ return -EINVAL;
+
+ return solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
+ (ch * SOLO_MOT_THRESH_SIZE * 2),
+ val, SOLO_MOT_THRESH_SIZE);
+}
+
+int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch,
+ const struct solo_motion_thresholds *thresholds)
+{
+ u32 off = SOLO_MOT_FLAG_AREA + ch * SOLO_MOT_THRESH_SIZE * 2;
+ u16 buf[SOLO_MOTION_SZ];
+ int x, y;
+ int ret = 0;
+
+ for (y = 0; y < SOLO_MOTION_SZ; y++) {
+ for (x = 0; x < SOLO_MOTION_SZ; x++)
+ buf[x] = cpu_to_le16(thresholds->thresholds[y][x]);
+ ret |= solo_p2m_dma(solo_dev, 1, buf,
+ SOLO_MOTION_EXT_ADDR(solo_dev) + off + y * sizeof(buf),
+ sizeof(buf), 0, 0);
+ }
+ return ret;
+}
+
+/* First 8k is motion flag (512 bytes * 16). Following that is an 8k+8k
+ * threshold and working table for each channel. Atleast that's what the
+ * spec says. However, this code (taken from rdk) has some mystery 8k
+ * block right after the flag area, before the first thresh table. */
+static void solo_motion_config(struct solo_dev *solo_dev)
+{
+ int i;
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ /* Clear motion flag area */
+ solo_dma_vin_region(solo_dev, i * SOLO_MOT_FLAG_SIZE, 0x0000,
+ SOLO_MOT_FLAG_SIZE);
+
+ /* Clear working cache table */
+ solo_dma_vin_region(solo_dev, SOLO_MOT_FLAG_AREA +
+ (i * SOLO_MOT_THRESH_SIZE * 2) +
+ SOLO_MOT_THRESH_SIZE, 0x0000,
+ SOLO_MOT_THRESH_SIZE);
+
+ /* Set default threshold table */
+ solo_set_motion_threshold(solo_dev, i, SOLO_DEF_MOT_THRESH);
+ }
+
+ /* Default motion settings */
+ solo_reg_write(solo_dev, SOLO_VI_MOT_ADR, SOLO_VI_MOTION_EN(0) |
+ (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
+ solo_reg_write(solo_dev, SOLO_VI_MOT_CTRL,
+ SOLO_VI_MOTION_FRAME_COUNT(3) |
+ SOLO_VI_MOTION_SAMPLE_LENGTH(solo_dev->video_hsize / 16)
+ /* | SOLO_VI_MOTION_INTR_START_STOP */
+ | SOLO_VI_MOTION_SAMPLE_COUNT(10));
+
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
+}
+
+int solo_disp_init(struct solo_dev *solo_dev)
+{
+ int i;
+
+ solo_dev->video_hsize = 704;
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ solo_dev->video_vsize = 240;
+ solo_dev->fps = 30;
+ } else {
+ solo_dev->video_vsize = 288;
+ solo_dev->fps = 25;
+ }
+
+ solo_vin_config(solo_dev);
+ solo_motion_config(solo_dev);
+ solo_vout_config(solo_dev);
+
+ for (i = 0; i < solo_dev->nr_chans; i++)
+ solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 1);
+
+ return 0;
+}
+
+void solo_disp_exit(struct solo_dev *solo_dev)
+{
+ int i;
+
+ solo_reg_write(solo_dev, SOLO_VO_DISP_CTRL, 0);
+ solo_reg_write(solo_dev, SOLO_VO_ZOOM_CTRL, 0);
+ solo_reg_write(solo_dev, SOLO_VO_FREEZE_CTRL, 0);
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(i), 0);
+ solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(i), 0);
+ solo_reg_write(solo_dev, SOLO_VI_WIN_ON(i), 0);
+ }
+
+ /* Set default border */
+ for (i = 0; i < 5; i++)
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_X(i), 0);
+
+ for (i = 0; i < 5; i++)
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_Y(i), 0);
+
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_LINE_MASK, 0);
+ solo_reg_write(solo_dev, SOLO_VO_BORDER_FILL_MASK, 0);
+
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(0), 0);
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(0), 0);
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(0), 0);
+
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_CTRL(1), 0);
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_START(1), 0);
+ solo_reg_write(solo_dev, SOLO_VO_RECTANGLE_STOP(1), 0);
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include "solo6x10.h"
+
+/* Control */
+#define EE_SHIFT_CLK 0x04
+#define EE_CS 0x08
+#define EE_DATA_WRITE 0x02
+#define EE_DATA_READ 0x01
+#define EE_ENB (0x80 | EE_CS)
+
+#define eeprom_delay() udelay(100)
+#if 0
+#define eeprom_delay() solo_reg_read(solo_dev, SOLO_EEPROM_CTRL)
+#define eeprom_delay() ({ \
+ int i, ret; \
+ udelay(100); \
+ for (i = ret = 0; i < 1000 && !ret; i++) \
+ ret = solo_eeprom_reg_read(solo_dev); \
+})
+#endif
+#define ADDR_LEN 6
+
+/* Commands */
+#define EE_EWEN_CMD 4
+#define EE_EWDS_CMD 4
+#define EE_WRITE_CMD 5
+#define EE_READ_CMD 6
+#define EE_ERASE_CMD 7
+
+static unsigned int solo_eeprom_reg_read(struct solo_dev *solo_dev)
+{
+ return solo_reg_read(solo_dev, SOLO_EEPROM_CTRL) & EE_DATA_READ;
+}
+
+static void solo_eeprom_reg_write(struct solo_dev *solo_dev, u32 data)
+{
+ solo_reg_write(solo_dev, SOLO_EEPROM_CTRL, data);
+ eeprom_delay();
+}
+
+static void solo_eeprom_cmd(struct solo_dev *solo_dev, int cmd)
+{
+ int i;
+
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ACCESS_EN);
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
+
+ for (i = 4 + ADDR_LEN; i >= 0; i--) {
+ int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE | dataval);
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
+ EE_SHIFT_CLK | dataval);
+ }
+
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
+}
+
+unsigned int solo_eeprom_ewen(struct solo_dev *solo_dev, int w_en)
+{
+ int ewen_cmd = (w_en ? 0x3f : 0) | (EE_EWEN_CMD << ADDR_LEN);
+ unsigned int retval = 0;
+ int i;
+
+ solo_eeprom_cmd(solo_dev, ewen_cmd);
+
+ for (i = 0; i < 16; i++) {
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
+ EE_SHIFT_CLK);
+ retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
+ retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
+ }
+
+ solo_eeprom_reg_write(solo_dev, ~EE_CS);
+ retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
+
+ return retval;
+}
+
+unsigned short solo_eeprom_read(struct solo_dev *solo_dev, int loc)
+{
+ int read_cmd = loc | (EE_READ_CMD << ADDR_LEN);
+ unsigned short retval = 0;
+ int i;
+
+ solo_eeprom_cmd(solo_dev, read_cmd);
+
+ for (i = 0; i < 16; i++) {
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE |
+ EE_SHIFT_CLK);
+ retval = (retval << 1) | solo_eeprom_reg_read(solo_dev);
+ solo_eeprom_reg_write(solo_dev, SOLO_EEPROM_ENABLE);
+ }
+
+ solo_eeprom_reg_write(solo_dev, ~EE_CS);
+
+ return retval;
+}
+
+int solo_eeprom_write(struct solo_dev *solo_dev, int loc,
+ unsigned short data)
+{
+ int write_cmd = loc | (EE_WRITE_CMD << ADDR_LEN);
+ unsigned int retval;
+ int i;
+
+ solo_eeprom_cmd(solo_dev, write_cmd);
+
+ for (i = 15; i >= 0; i--) {
+ unsigned int dataval = (data >> i) & 1;
+
+ solo_eeprom_reg_write(solo_dev, EE_ENB);
+ solo_eeprom_reg_write(solo_dev,
+ EE_ENB | (dataval << 1) | EE_SHIFT_CLK);
+ }
+
+ solo_eeprom_reg_write(solo_dev, EE_ENB);
+ solo_eeprom_reg_write(solo_dev, ~EE_CS);
+ solo_eeprom_reg_write(solo_dev, EE_ENB);
+
+ for (i = retval = 0; i < 10000 && !retval; i++)
+ retval = solo_eeprom_reg_read(solo_dev);
+
+ solo_eeprom_reg_write(solo_dev, ~EE_CS);
+
+ return !retval;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/font.h>
+#include <linux/bitrev.h>
+#include <linux/slab.h>
+
+#include "solo6x10.h"
+
+#define VI_PROG_HSIZE (1280 - 16)
+#define VI_PROG_VSIZE (1024 - 16)
+
+#define IRQ_LEVEL 2
+
+static void solo_capture_config(struct solo_dev *solo_dev)
+{
+ unsigned long height;
+ unsigned long width;
+ void *buf;
+ int i;
+
+ solo_reg_write(solo_dev, SOLO_CAP_BASE,
+ SOLO_CAP_MAX_PAGE((SOLO_CAP_EXT_SIZE(solo_dev)
+ - SOLO_CAP_PAGE_SIZE) >> 16)
+ | SOLO_CAP_BASE_ADDR(SOLO_CAP_EXT_ADDR(solo_dev) >> 16));
+
+ /* XXX: Undocumented bits at b17 and b24 */
+ if (solo_dev->type == SOLO_DEV_6110) {
+ /* NOTE: Ref driver has (62 << 24) here as well, but it causes
+ * wacked out frame timing on 4-port 6110. */
+ solo_reg_write(solo_dev, SOLO_CAP_BTW,
+ (1 << 17) | SOLO_CAP_PROG_BANDWIDTH(2) |
+ SOLO_CAP_MAX_BANDWIDTH(36));
+ } else {
+ solo_reg_write(solo_dev, SOLO_CAP_BTW,
+ (1 << 17) | SOLO_CAP_PROG_BANDWIDTH(2) |
+ SOLO_CAP_MAX_BANDWIDTH(32));
+ }
+
+ /* Set scale 1, 9 dimension */
+ width = solo_dev->video_hsize;
+ height = solo_dev->video_vsize;
+ solo_reg_write(solo_dev, SOLO_DIM_SCALE1,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Set scale 2, 10 dimension */
+ width = solo_dev->video_hsize / 2;
+ height = solo_dev->video_vsize;
+ solo_reg_write(solo_dev, SOLO_DIM_SCALE2,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Set scale 3, 11 dimension */
+ width = solo_dev->video_hsize / 2;
+ height = solo_dev->video_vsize / 2;
+ solo_reg_write(solo_dev, SOLO_DIM_SCALE3,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Set scale 4, 12 dimension */
+ width = solo_dev->video_hsize / 3;
+ height = solo_dev->video_vsize / 3;
+ solo_reg_write(solo_dev, SOLO_DIM_SCALE4,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Set scale 5, 13 dimension */
+ width = solo_dev->video_hsize / 4;
+ height = solo_dev->video_vsize / 2;
+ solo_reg_write(solo_dev, SOLO_DIM_SCALE5,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 8) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Progressive */
+ width = VI_PROG_HSIZE;
+ height = VI_PROG_VSIZE;
+ solo_reg_write(solo_dev, SOLO_DIM_PROG,
+ SOLO_DIM_H_MB_NUM(width / 16) |
+ SOLO_DIM_V_MB_NUM_FRAME(height / 16) |
+ SOLO_DIM_V_MB_NUM_FIELD(height / 16));
+
+ /* Clear OSD */
+ solo_reg_write(solo_dev, SOLO_VE_OSD_CH, 0);
+ solo_reg_write(solo_dev, SOLO_VE_OSD_BASE, SOLO_EOSD_EXT_ADDR >> 16);
+ solo_reg_write(solo_dev, SOLO_VE_OSD_CLR,
+ 0xF0 << 16 | 0x80 << 8 | 0x80);
+
+ if (solo_dev->type == SOLO_DEV_6010)
+ solo_reg_write(solo_dev, SOLO_VE_OSD_OPT,
+ SOLO_VE_OSD_H_SHADOW | SOLO_VE_OSD_V_SHADOW);
+ else
+ solo_reg_write(solo_dev, SOLO_VE_OSD_OPT, SOLO_VE_OSD_V_DOUBLE
+ | SOLO_VE_OSD_H_SHADOW | SOLO_VE_OSD_V_SHADOW);
+
+ /* Clear OSG buffer */
+ buf = kzalloc(SOLO_EOSD_EXT_SIZE(solo_dev), GFP_KERNEL);
+ if (!buf)
+ return;
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_p2m_dma(solo_dev, 1, buf,
+ SOLO_EOSD_EXT_ADDR +
+ (SOLO_EOSD_EXT_SIZE(solo_dev) * i),
+ SOLO_EOSD_EXT_SIZE(solo_dev), 0, 0);
+ }
+ kfree(buf);
+}
+
+/* Should be called with enable_lock held */
+int solo_osd_print(struct solo_enc_dev *solo_enc)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ unsigned char *str = solo_enc->osd_text;
+ u8 *buf = solo_enc->osd_buf;
+ u32 reg = solo_reg_read(solo_dev, SOLO_VE_OSD_CH);
+ const struct font_desc *vga = find_font("VGA8x16");
+ const unsigned char *vga_data;
+ int len;
+ int i, j;
+
+ if (WARN_ON_ONCE(!vga))
+ return -ENODEV;
+
+ len = strlen(str);
+
+ if (len == 0) {
+ /* Disable OSD on this channel */
+ reg &= ~(1 << solo_enc->ch);
+ solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
+ return 0;
+ }
+
+ memset(buf, 0, SOLO_EOSD_EXT_SIZE_MAX);
+ vga_data = (const unsigned char *)vga->data;
+
+ for (i = 0; i < len; i++) {
+ unsigned char c = str[i];
+
+ for (j = 0; j < 16; j++) {
+ buf[(j * 2) + (i % 2) + (i / 2 * 32)] =
+ bitrev8(vga_data[(c * 16) + j]);
+ }
+ }
+
+ solo_p2m_dma(solo_dev, 1, buf,
+ SOLO_EOSD_EXT_ADDR +
+ (solo_enc->ch * SOLO_EOSD_EXT_SIZE(solo_dev)),
+ SOLO_EOSD_EXT_SIZE(solo_dev), 0, 0);
+
+ /* Enable OSD on this channel */
+ reg |= (1 << solo_enc->ch);
+ solo_reg_write(solo_dev, SOLO_VE_OSD_CH, reg);
+
+ return 0;
+}
+
+/**
+ * Set channel Quality Profile (0-3).
+ */
+void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,
+ unsigned int qp)
+{
+ unsigned long flags;
+ unsigned int idx, reg;
+
+ if ((ch > 31) || (qp > 3))
+ return;
+
+ if (solo_dev->type == SOLO_DEV_6010)
+ return;
+
+ if (ch < 16) {
+ idx = 0;
+ reg = SOLO_VE_JPEG_QP_CH_L;
+ } else {
+ ch -= 16;
+ idx = 1;
+ reg = SOLO_VE_JPEG_QP_CH_H;
+ }
+ ch *= 2;
+
+ spin_lock_irqsave(&solo_dev->jpeg_qp_lock, flags);
+
+ solo_dev->jpeg_qp[idx] &= ~(3 << ch);
+ solo_dev->jpeg_qp[idx] |= (qp & 3) << ch;
+
+ solo_reg_write(solo_dev, reg, solo_dev->jpeg_qp[idx]);
+
+ spin_unlock_irqrestore(&solo_dev->jpeg_qp_lock, flags);
+}
+
+int solo_g_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch)
+{
+ int idx;
+
+ if (solo_dev->type == SOLO_DEV_6010)
+ return 2;
+
+ if (WARN_ON_ONCE(ch > 31))
+ return 2;
+
+ if (ch < 16) {
+ idx = 0;
+ } else {
+ ch -= 16;
+ idx = 1;
+ }
+ ch *= 2;
+
+ return (solo_dev->jpeg_qp[idx] >> ch) & 3;
+}
+
+#define SOLO_QP_INIT 0xaaaaaaaa
+
+static void solo_jpeg_config(struct solo_dev *solo_dev)
+{
+ if (solo_dev->type == SOLO_DEV_6010) {
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL,
+ (2 << 24) | (2 << 16) | (2 << 8) | 2);
+ } else {
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_TBL,
+ (4 << 24) | (3 << 16) | (2 << 8) | 1);
+ }
+
+ spin_lock_init(&solo_dev->jpeg_qp_lock);
+
+ /* Initialize Quality Profile for all channels */
+ solo_dev->jpeg_qp[0] = solo_dev->jpeg_qp[1] = SOLO_QP_INIT;
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_L, SOLO_QP_INIT);
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_QP_CH_H, SOLO_QP_INIT);
+
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG,
+ (SOLO_JPEG_EXT_SIZE(solo_dev) & 0xffff0000) |
+ ((SOLO_JPEG_EXT_ADDR(solo_dev) >> 16) & 0x0000ffff));
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_CTRL, 0xffffffff);
+ if (solo_dev->type == SOLO_DEV_6110) {
+ solo_reg_write(solo_dev, SOLO_VE_JPEG_CFG1,
+ (0 << 16) | (30 << 8) | 60);
+ }
+}
+
+static void solo_mp4e_config(struct solo_dev *solo_dev)
+{
+ int i;
+ u32 cfg;
+
+ solo_reg_write(solo_dev, SOLO_VE_CFG0,
+ SOLO_VE_INTR_CTRL(IRQ_LEVEL) |
+ SOLO_VE_BLOCK_SIZE(SOLO_MP4E_EXT_SIZE(solo_dev) >> 16) |
+ SOLO_VE_BLOCK_BASE(SOLO_MP4E_EXT_ADDR(solo_dev) >> 16));
+
+
+ cfg = SOLO_VE_BYTE_ALIGN(2) | SOLO_VE_INSERT_INDEX
+ | SOLO_VE_MOTION_MODE(0);
+ if (solo_dev->type != SOLO_DEV_6010) {
+ cfg |= SOLO_VE_MPEG_SIZE_H(
+ (SOLO_MP4E_EXT_SIZE(solo_dev) >> 24) & 0x0f);
+ cfg |= SOLO_VE_JPEG_SIZE_H(
+ (SOLO_JPEG_EXT_SIZE(solo_dev) >> 24) & 0x0f);
+ }
+ solo_reg_write(solo_dev, SOLO_VE_CFG1, cfg);
+
+ solo_reg_write(solo_dev, SOLO_VE_WMRK_POLY, 0);
+ solo_reg_write(solo_dev, SOLO_VE_VMRK_INIT_KEY, 0);
+ solo_reg_write(solo_dev, SOLO_VE_WMRK_STRL, 0);
+ if (solo_dev->type == SOLO_DEV_6110)
+ solo_reg_write(solo_dev, SOLO_VE_WMRK_ENABLE, 0);
+ solo_reg_write(solo_dev, SOLO_VE_ENCRYP_POLY, 0);
+ solo_reg_write(solo_dev, SOLO_VE_ENCRYP_INIT, 0);
+
+ solo_reg_write(solo_dev, SOLO_VE_ATTR,
+ SOLO_VE_LITTLE_ENDIAN |
+ SOLO_COMP_ATTR_FCODE(1) |
+ SOLO_COMP_TIME_INC(0) |
+ SOLO_COMP_TIME_WIDTH(15) |
+ SOLO_DCT_INTERVAL(solo_dev->type == SOLO_DEV_6010 ? 9 : 10));
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE(i),
+ (SOLO_EREF_EXT_ADDR(solo_dev) +
+ (i * SOLO_EREF_EXT_SIZE)) >> 16);
+ solo_reg_write(solo_dev, SOLO_VE_CH_REF_BASE_E(i),
+ (SOLO_EREF_EXT_ADDR(solo_dev) +
+ ((i + 16) * SOLO_EREF_EXT_SIZE)) >> 16);
+ }
+
+ if (solo_dev->type == SOLO_DEV_6110) {
+ solo_reg_write(solo_dev, SOLO_VE_COMPT_MOT, 0x00040008);
+ } else {
+ for (i = 0; i < solo_dev->nr_chans; i++)
+ solo_reg_write(solo_dev, SOLO_VE_CH_MOT(i), 0x100);
+ }
+}
+
+int solo_enc_init(struct solo_dev *solo_dev)
+{
+ int i;
+
+ solo_capture_config(solo_dev);
+ solo_mp4e_config(solo_dev);
+ solo_jpeg_config(solo_dev);
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
+ solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
+ }
+
+ return 0;
+}
+
+void solo_enc_exit(struct solo_dev *solo_dev)
+{
+ int i;
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(i), 0);
+ solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(i), 0);
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mempool.h>
+#include <linux/poll.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/control.h>
+
+#include "solo6x10.h"
+#include "solo6x10-tw28.h"
+
+#define G723_FDMA_PAGES 32
+#define G723_PERIOD_BYTES 48
+#define G723_PERIOD_BLOCK 1024
+#define G723_FRAMES_PER_PAGE 48
+
+/* Sets up channels 16-19 for decoding and 0-15 for encoding */
+#define OUTMODE_MASK 0x300
+
+#define SAMPLERATE 8000
+#define BITRATE 25
+
+/* The solo writes to 1k byte pages, 32 pages, in the dma. Each 1k page
+ * is broken down to 20 * 48 byte regions (one for each channel possible)
+ * with the rest of the page being dummy data. */
+#define G723_MAX_BUFFER (G723_PERIOD_BYTES * PERIODS_MAX)
+#define G723_INTR_ORDER 4 /* 0 - 4 */
+#define PERIODS_MIN (1 << G723_INTR_ORDER)
+#define PERIODS_MAX G723_FDMA_PAGES
+
+struct solo_snd_pcm {
+ int on;
+ spinlock_t lock;
+ struct solo_dev *solo_dev;
+ unsigned char *g723_buf;
+ dma_addr_t g723_dma;
+};
+
+static void solo_g723_config(struct solo_dev *solo_dev)
+{
+ int clk_div;
+
+ clk_div = (solo_dev->clock_mhz * 1000000)
+ / (SAMPLERATE * (BITRATE * 2) * 2);
+
+ solo_reg_write(solo_dev, SOLO_AUDIO_SAMPLE,
+ SOLO_AUDIO_BITRATE(BITRATE)
+ | SOLO_AUDIO_CLK_DIV(clk_div));
+
+ solo_reg_write(solo_dev, SOLO_AUDIO_FDMA_INTR,
+ SOLO_AUDIO_FDMA_INTERVAL(1)
+ | SOLO_AUDIO_INTR_ORDER(G723_INTR_ORDER)
+ | SOLO_AUDIO_FDMA_BASE(SOLO_G723_EXT_ADDR(solo_dev) >> 16));
+
+ solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL,
+ SOLO_AUDIO_ENABLE
+ | SOLO_AUDIO_I2S_MODE
+ | SOLO_AUDIO_I2S_MULTI(3)
+ | SOLO_AUDIO_MODE(OUTMODE_MASK));
+}
+
+void solo_g723_isr(struct solo_dev *solo_dev)
+{
+ struct snd_pcm_str *pstr =
+ &solo_dev->snd_pcm->streams[SNDRV_PCM_STREAM_CAPTURE];
+ struct snd_pcm_substream *ss;
+ struct solo_snd_pcm *solo_pcm;
+
+ for (ss = pstr->substream; ss != NULL; ss = ss->next) {
+ if (snd_pcm_substream_chip(ss) == NULL)
+ continue;
+
+ /* This means open() hasn't been called on this one */
+ if (snd_pcm_substream_chip(ss) == solo_dev)
+ continue;
+
+ /* Haven't triggered a start yet */
+ solo_pcm = snd_pcm_substream_chip(ss);
+ if (!solo_pcm->on)
+ continue;
+
+ snd_pcm_period_elapsed(ss);
+ }
+}
+
+static int snd_solo_hw_params(struct snd_pcm_substream *ss,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return snd_pcm_lib_malloc_pages(ss, params_buffer_bytes(hw_params));
+}
+
+static int snd_solo_hw_free(struct snd_pcm_substream *ss)
+{
+ return snd_pcm_lib_free_pages(ss);
+}
+
+static const struct snd_pcm_hardware snd_solo_pcm_hw = {
+ .info = (SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_MMAP_VALID),
+ .formats = SNDRV_PCM_FMTBIT_U8,
+ .rates = SNDRV_PCM_RATE_8000,
+ .rate_min = SAMPLERATE,
+ .rate_max = SAMPLERATE,
+ .channels_min = 1,
+ .channels_max = 1,
+ .buffer_bytes_max = G723_MAX_BUFFER,
+ .period_bytes_min = G723_PERIOD_BYTES,
+ .period_bytes_max = G723_PERIOD_BYTES,
+ .periods_min = PERIODS_MIN,
+ .periods_max = PERIODS_MAX,
+};
+
+static int snd_solo_pcm_open(struct snd_pcm_substream *ss)
+{
+ struct solo_dev *solo_dev = snd_pcm_substream_chip(ss);
+ struct solo_snd_pcm *solo_pcm;
+
+ solo_pcm = kzalloc(sizeof(*solo_pcm), GFP_KERNEL);
+ if (solo_pcm == NULL)
+ goto oom;
+
+ solo_pcm->g723_buf = pci_alloc_consistent(solo_dev->pdev,
+ G723_PERIOD_BYTES,
+ &solo_pcm->g723_dma);
+ if (solo_pcm->g723_buf == NULL)
+ goto oom;
+
+ spin_lock_init(&solo_pcm->lock);
+ solo_pcm->solo_dev = solo_dev;
+ ss->runtime->hw = snd_solo_pcm_hw;
+
+ snd_pcm_substream_chip(ss) = solo_pcm;
+
+ return 0;
+
+oom:
+ kfree(solo_pcm);
+ return -ENOMEM;
+}
+
+static int snd_solo_pcm_close(struct snd_pcm_substream *ss)
+{
+ struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+
+ snd_pcm_substream_chip(ss) = solo_pcm->solo_dev;
+ pci_free_consistent(solo_pcm->solo_dev->pdev, G723_PERIOD_BYTES,
+ solo_pcm->g723_buf, solo_pcm->g723_dma);
+ kfree(solo_pcm);
+
+ return 0;
+}
+
+static int snd_solo_pcm_trigger(struct snd_pcm_substream *ss, int cmd)
+{
+ struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+ struct solo_dev *solo_dev = solo_pcm->solo_dev;
+ int ret = 0;
+
+ spin_lock(&solo_pcm->lock);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ if (solo_pcm->on == 0) {
+ /* If this is the first user, switch on interrupts */
+ if (atomic_inc_return(&solo_dev->snd_users) == 1)
+ solo_irq_on(solo_dev, SOLO_IRQ_G723);
+ solo_pcm->on = 1;
+ }
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ if (solo_pcm->on) {
+ /* If this was our last user, switch them off */
+ if (atomic_dec_return(&solo_dev->snd_users) == 0)
+ solo_irq_off(solo_dev, SOLO_IRQ_G723);
+ solo_pcm->on = 0;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock(&solo_pcm->lock);
+
+ return ret;
+}
+
+static int snd_solo_pcm_prepare(struct snd_pcm_substream *ss)
+{
+ return 0;
+}
+
+static snd_pcm_uframes_t snd_solo_pcm_pointer(struct snd_pcm_substream *ss)
+{
+ struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+ struct solo_dev *solo_dev = solo_pcm->solo_dev;
+ snd_pcm_uframes_t idx = solo_reg_read(solo_dev, SOLO_AUDIO_STA) & 0x1f;
+
+ return idx * G723_FRAMES_PER_PAGE;
+}
+
+static int snd_solo_pcm_copy(struct snd_pcm_substream *ss, int channel,
+ snd_pcm_uframes_t pos, void __user *dst,
+ snd_pcm_uframes_t count)
+{
+ struct solo_snd_pcm *solo_pcm = snd_pcm_substream_chip(ss);
+ struct solo_dev *solo_dev = solo_pcm->solo_dev;
+ int err, i;
+
+ for (i = 0; i < (count / G723_FRAMES_PER_PAGE); i++) {
+ int page = (pos / G723_FRAMES_PER_PAGE) + i;
+
+ err = solo_p2m_dma_t(solo_dev, 0, solo_pcm->g723_dma,
+ SOLO_G723_EXT_ADDR(solo_dev) +
+ (page * G723_PERIOD_BLOCK) +
+ (ss->number * G723_PERIOD_BYTES),
+ G723_PERIOD_BYTES, 0, 0);
+ if (err)
+ return err;
+
+ err = copy_to_user(dst + (i * G723_PERIOD_BYTES),
+ solo_pcm->g723_buf, G723_PERIOD_BYTES);
+
+ if (err)
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static struct snd_pcm_ops snd_solo_pcm_ops = {
+ .open = snd_solo_pcm_open,
+ .close = snd_solo_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_solo_hw_params,
+ .hw_free = snd_solo_hw_free,
+ .prepare = snd_solo_pcm_prepare,
+ .trigger = snd_solo_pcm_trigger,
+ .pointer = snd_solo_pcm_pointer,
+ .copy = snd_solo_pcm_copy,
+};
+
+static int snd_solo_capture_volume_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *info)
+{
+ info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ info->count = 1;
+ info->value.integer.min = 0;
+ info->value.integer.max = 15;
+ info->value.integer.step = 1;
+
+ return 0;
+}
+
+static int snd_solo_capture_volume_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *value)
+{
+ struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol);
+ u8 ch = value->id.numid - 1;
+
+ value->value.integer.value[0] = tw28_get_audio_gain(solo_dev, ch);
+
+ return 0;
+}
+
+static int snd_solo_capture_volume_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *value)
+{
+ struct solo_dev *solo_dev = snd_kcontrol_chip(kcontrol);
+ u8 ch = value->id.numid - 1;
+ u8 old_val;
+
+ old_val = tw28_get_audio_gain(solo_dev, ch);
+ if (old_val == value->value.integer.value[0])
+ return 0;
+
+ tw28_set_audio_gain(solo_dev, ch, value->value.integer.value[0]);
+
+ return 1;
+}
+
+static struct snd_kcontrol_new snd_solo_capture_volume = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Volume",
+ .info = snd_solo_capture_volume_info,
+ .get = snd_solo_capture_volume_get,
+ .put = snd_solo_capture_volume_put,
+};
+
+static int solo_snd_pcm_init(struct solo_dev *solo_dev)
+{
+ struct snd_card *card = solo_dev->snd_card;
+ struct snd_pcm *pcm;
+ struct snd_pcm_substream *ss;
+ int ret;
+ int i;
+
+ ret = snd_pcm_new(card, card->driver, 0, 0, solo_dev->nr_chans,
+ &pcm);
+ if (ret < 0)
+ return ret;
+
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_solo_pcm_ops);
+
+ snd_pcm_chip(pcm) = solo_dev;
+ pcm->info_flags = 0;
+ strcpy(pcm->name, card->shortname);
+
+ for (i = 0, ss = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
+ ss; ss = ss->next, i++)
+ sprintf(ss->name, "Camera #%d Audio", i);
+
+ ret = snd_pcm_lib_preallocate_pages_for_all(pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ G723_MAX_BUFFER, G723_MAX_BUFFER);
+ if (ret < 0)
+ return ret;
+
+ solo_dev->snd_pcm = pcm;
+
+ return 0;
+}
+
+int solo_g723_init(struct solo_dev *solo_dev)
+{
+ static struct snd_device_ops ops = { NULL };
+ struct snd_card *card;
+ struct snd_kcontrol_new kctl;
+ char name[32];
+ int ret;
+
+ atomic_set(&solo_dev->snd_users, 0);
+
+ /* Allows for easier mapping between video and audio */
+ sprintf(name, "Softlogic%d", solo_dev->vfd->num);
+
+ ret = snd_card_create(SNDRV_DEFAULT_IDX1, name, THIS_MODULE, 0,
+ &solo_dev->snd_card);
+ if (ret < 0)
+ return ret;
+
+ card = solo_dev->snd_card;
+
+ strcpy(card->driver, SOLO6X10_NAME);
+ strcpy(card->shortname, "SOLO-6x10 Audio");
+ sprintf(card->longname, "%s on %s IRQ %d", card->shortname,
+ pci_name(solo_dev->pdev), solo_dev->pdev->irq);
+ snd_card_set_dev(card, &solo_dev->pdev->dev);
+
+ ret = snd_device_new(card, SNDRV_DEV_LOWLEVEL, solo_dev, &ops);
+ if (ret < 0)
+ goto snd_error;
+
+ /* Mixer controls */
+ strcpy(card->mixername, "SOLO-6x10");
+ kctl = snd_solo_capture_volume;
+ kctl.count = solo_dev->nr_chans;
+
+ ret = snd_ctl_add(card, snd_ctl_new1(&kctl, solo_dev));
+ if (ret < 0)
+ return ret;
+
+ ret = solo_snd_pcm_init(solo_dev);
+ if (ret < 0)
+ goto snd_error;
+
+ ret = snd_card_register(card);
+ if (ret < 0)
+ goto snd_error;
+
+ solo_g723_config(solo_dev);
+
+ dev_info(&solo_dev->pdev->dev, "Alsa sound card as %s\n", name);
+
+ return 0;
+
+snd_error:
+ snd_card_free(card);
+ return ret;
+}
+
+void solo_g723_exit(struct solo_dev *solo_dev)
+{
+ if (!solo_dev->snd_card)
+ return;
+
+ solo_reg_write(solo_dev, SOLO_AUDIO_CONTROL, 0);
+ solo_irq_off(solo_dev, SOLO_IRQ_G723);
+
+ snd_card_free(solo_dev->snd_card);
+ solo_dev->snd_card = NULL;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
+#include "solo6x10.h"
+
+static void solo_gpio_mode(struct solo_dev *solo_dev,
+ unsigned int port_mask, unsigned int mode)
+{
+ int port;
+ unsigned int ret;
+
+ ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_0);
+
+ /* To set gpio */
+ for (port = 0; port < 16; port++) {
+ if (!((1 << port) & port_mask))
+ continue;
+
+ ret &= (~(3 << (port << 1)));
+ ret |= ((mode & 3) << (port << 1));
+ }
+
+ solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_0, ret);
+
+ /* To set extended gpio - sensor */
+ ret = solo_reg_read(solo_dev, SOLO_GPIO_CONFIG_1);
+
+ for (port = 0; port < 16; port++) {
+ if (!((1 << (port + 16)) & port_mask))
+ continue;
+
+ if (!mode)
+ ret &= ~(1 << port);
+ else
+ ret |= 1 << port;
+ }
+
+ solo_reg_write(solo_dev, SOLO_GPIO_CONFIG_1, ret);
+}
+
+static void solo_gpio_set(struct solo_dev *solo_dev, unsigned int value)
+{
+ solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+ solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) | value);
+}
+
+static void solo_gpio_clear(struct solo_dev *solo_dev, unsigned int value)
+{
+ solo_reg_write(solo_dev, SOLO_GPIO_DATA_OUT,
+ solo_reg_read(solo_dev, SOLO_GPIO_DATA_OUT) & ~value);
+}
+
+static void solo_gpio_config(struct solo_dev *solo_dev)
+{
+ /* Video reset */
+ solo_gpio_mode(solo_dev, 0x30, 1);
+ solo_gpio_clear(solo_dev, 0x30);
+ udelay(100);
+ solo_gpio_set(solo_dev, 0x30);
+ udelay(100);
+
+ /* Warning: Don't touch the next line unless you're sure of what
+ * you're doing: first four gpio [0-3] are used for video. */
+ solo_gpio_mode(solo_dev, 0x0f, 2);
+
+ /* We use bit 8-15 of SOLO_GPIO_CONFIG_0 for relay purposes */
+ solo_gpio_mode(solo_dev, 0xff00, 1);
+
+ /* Initially set relay status to 0 */
+ solo_gpio_clear(solo_dev, 0xff00);
+}
+
+int solo_gpio_init(struct solo_dev *solo_dev)
+{
+ solo_gpio_config(solo_dev);
+ return 0;
+}
+
+void solo_gpio_exit(struct solo_dev *solo_dev)
+{
+ solo_gpio_clear(solo_dev, 0x30);
+ solo_gpio_config(solo_dev);
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* XXX: The SOLO6x10 i2c does not have separate interrupts for each i2c
+ * channel. The bus can only handle one i2c event at a time. The below handles
+ * this all wrong. We should be using the status registers to see if the bus
+ * is in use, and have a global lock to check the status register. Also,
+ * the bulk of the work should be handled out-of-interrupt. The ugly loops
+ * that occur during interrupt scare me. The ISR should merely signal
+ * thread context, ACK the interrupt, and move on. -- BenC */
+
+#include <linux/kernel.h>
+
+#include "solo6x10.h"
+
+u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off)
+{
+ struct i2c_msg msgs[2];
+ u8 data;
+
+ msgs[0].flags = 0;
+ msgs[0].addr = addr;
+ msgs[0].len = 1;
+ msgs[0].buf = &off;
+
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].addr = addr;
+ msgs[1].len = 1;
+ msgs[1].buf = &data;
+
+ i2c_transfer(&solo_dev->i2c_adap[id], msgs, 2);
+
+ return data;
+}
+
+void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr,
+ u8 off, u8 data)
+{
+ struct i2c_msg msgs;
+ u8 buf[2];
+
+ buf[0] = off;
+ buf[1] = data;
+ msgs.flags = 0;
+ msgs.addr = addr;
+ msgs.len = 2;
+ msgs.buf = buf;
+
+ i2c_transfer(&solo_dev->i2c_adap[id], &msgs, 1);
+}
+
+static void solo_i2c_flush(struct solo_dev *solo_dev, int wr)
+{
+ u32 ctrl;
+
+ ctrl = SOLO_IIC_CH_SET(solo_dev->i2c_id);
+
+ if (solo_dev->i2c_state == IIC_STATE_START)
+ ctrl |= SOLO_IIC_START;
+
+ if (wr) {
+ ctrl |= SOLO_IIC_WRITE;
+ } else {
+ ctrl |= SOLO_IIC_READ;
+ if (!(solo_dev->i2c_msg->flags & I2C_M_NO_RD_ACK))
+ ctrl |= SOLO_IIC_ACK_EN;
+ }
+
+ if (solo_dev->i2c_msg_ptr == solo_dev->i2c_msg->len)
+ ctrl |= SOLO_IIC_STOP;
+
+ solo_reg_write(solo_dev, SOLO_IIC_CTRL, ctrl);
+}
+
+static void solo_i2c_start(struct solo_dev *solo_dev)
+{
+ u32 addr = solo_dev->i2c_msg->addr << 1;
+
+ if (solo_dev->i2c_msg->flags & I2C_M_RD)
+ addr |= 1;
+
+ solo_dev->i2c_state = IIC_STATE_START;
+ solo_reg_write(solo_dev, SOLO_IIC_TXD, addr);
+ solo_i2c_flush(solo_dev, 1);
+}
+
+static void solo_i2c_stop(struct solo_dev *solo_dev)
+{
+ solo_irq_off(solo_dev, SOLO_IRQ_IIC);
+ solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
+ solo_dev->i2c_state = IIC_STATE_STOP;
+ wake_up(&solo_dev->i2c_wait);
+}
+
+static int solo_i2c_handle_read(struct solo_dev *solo_dev)
+{
+prepare_read:
+ if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
+ solo_i2c_flush(solo_dev, 0);
+ return 0;
+ }
+
+ solo_dev->i2c_msg_ptr = 0;
+ solo_dev->i2c_msg++;
+ solo_dev->i2c_msg_num--;
+
+ if (solo_dev->i2c_msg_num == 0) {
+ solo_i2c_stop(solo_dev);
+ return 0;
+ }
+
+ if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
+ solo_i2c_start(solo_dev);
+ } else {
+ if (solo_dev->i2c_msg->flags & I2C_M_RD)
+ goto prepare_read;
+ else
+ solo_i2c_stop(solo_dev);
+ }
+
+ return 0;
+}
+
+static int solo_i2c_handle_write(struct solo_dev *solo_dev)
+{
+retry_write:
+ if (solo_dev->i2c_msg_ptr != solo_dev->i2c_msg->len) {
+ solo_reg_write(solo_dev, SOLO_IIC_TXD,
+ solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr]);
+ solo_dev->i2c_msg_ptr++;
+ solo_i2c_flush(solo_dev, 1);
+ return 0;
+ }
+
+ solo_dev->i2c_msg_ptr = 0;
+ solo_dev->i2c_msg++;
+ solo_dev->i2c_msg_num--;
+
+ if (solo_dev->i2c_msg_num == 0) {
+ solo_i2c_stop(solo_dev);
+ return 0;
+ }
+
+ if (!(solo_dev->i2c_msg->flags & I2C_M_NOSTART)) {
+ solo_i2c_start(solo_dev);
+ } else {
+ if (solo_dev->i2c_msg->flags & I2C_M_RD)
+ solo_i2c_stop(solo_dev);
+ else
+ goto retry_write;
+ }
+
+ return 0;
+}
+
+int solo_i2c_isr(struct solo_dev *solo_dev)
+{
+ u32 status = solo_reg_read(solo_dev, SOLO_IIC_CTRL);
+ int ret = -EINVAL;
+
+
+ if (CHK_FLAGS(status, SOLO_IIC_STATE_TRNS | SOLO_IIC_STATE_SIG_ERR)
+ || solo_dev->i2c_id < 0) {
+ solo_i2c_stop(solo_dev);
+ return -ENXIO;
+ }
+
+ switch (solo_dev->i2c_state) {
+ case IIC_STATE_START:
+ if (solo_dev->i2c_msg->flags & I2C_M_RD) {
+ solo_dev->i2c_state = IIC_STATE_READ;
+ ret = solo_i2c_handle_read(solo_dev);
+ break;
+ }
+
+ solo_dev->i2c_state = IIC_STATE_WRITE;
+ case IIC_STATE_WRITE:
+ ret = solo_i2c_handle_write(solo_dev);
+ break;
+
+ case IIC_STATE_READ:
+ solo_dev->i2c_msg->buf[solo_dev->i2c_msg_ptr] =
+ solo_reg_read(solo_dev, SOLO_IIC_RXD);
+ solo_dev->i2c_msg_ptr++;
+
+ ret = solo_i2c_handle_read(solo_dev);
+ break;
+
+ default:
+ solo_i2c_stop(solo_dev);
+ }
+
+ return ret;
+}
+
+static int solo_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct solo_dev *solo_dev = adap->algo_data;
+ unsigned long timeout;
+ int ret;
+ int i;
+ DEFINE_WAIT(wait);
+
+ for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+ if (&solo_dev->i2c_adap[i] == adap)
+ break;
+ }
+
+ if (i == SOLO_I2C_ADAPTERS)
+ return num; /* XXX Right return value for failure? */
+
+ mutex_lock(&solo_dev->i2c_mutex);
+ solo_dev->i2c_id = i;
+ solo_dev->i2c_msg = msgs;
+ solo_dev->i2c_msg_num = num;
+ solo_dev->i2c_msg_ptr = 0;
+
+ solo_reg_write(solo_dev, SOLO_IIC_CTRL, 0);
+ solo_irq_on(solo_dev, SOLO_IRQ_IIC);
+ solo_i2c_start(solo_dev);
+
+ timeout = HZ / 2;
+
+ for (;;) {
+ prepare_to_wait(&solo_dev->i2c_wait, &wait,
+ TASK_INTERRUPTIBLE);
+
+ if (solo_dev->i2c_state == IIC_STATE_STOP)
+ break;
+
+ timeout = schedule_timeout(timeout);
+ if (!timeout)
+ break;
+
+ if (signal_pending(current))
+ break;
+ }
+
+ finish_wait(&solo_dev->i2c_wait, &wait);
+ ret = num - solo_dev->i2c_msg_num;
+ solo_dev->i2c_state = IIC_STATE_IDLE;
+ solo_dev->i2c_id = -1;
+
+ mutex_unlock(&solo_dev->i2c_mutex);
+
+ return ret;
+}
+
+static u32 solo_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm solo_i2c_algo = {
+ .master_xfer = solo_i2c_master_xfer,
+ .functionality = solo_i2c_functionality,
+};
+
+int solo_i2c_init(struct solo_dev *solo_dev)
+{
+ int i;
+ int ret;
+
+ solo_reg_write(solo_dev, SOLO_IIC_CFG,
+ SOLO_IIC_PRESCALE(8) | SOLO_IIC_ENABLE);
+
+ solo_dev->i2c_id = -1;
+ solo_dev->i2c_state = IIC_STATE_IDLE;
+ init_waitqueue_head(&solo_dev->i2c_wait);
+ mutex_init(&solo_dev->i2c_mutex);
+
+ for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+ struct i2c_adapter *adap = &solo_dev->i2c_adap[i];
+
+ snprintf(adap->name, I2C_NAME_SIZE, "%s I2C %d",
+ SOLO6X10_NAME, i);
+ adap->algo = &solo_i2c_algo;
+ adap->algo_data = solo_dev;
+ adap->retries = 1;
+ adap->dev.parent = &solo_dev->pdev->dev;
+
+ ret = i2c_add_adapter(adap);
+ if (ret) {
+ adap->algo_data = NULL;
+ break;
+ }
+ }
+
+ if (ret) {
+ for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+ if (!solo_dev->i2c_adap[i].algo_data)
+ break;
+ i2c_del_adapter(&solo_dev->i2c_adap[i]);
+ solo_dev->i2c_adap[i].algo_data = NULL;
+ }
+ return ret;
+ }
+
+ return 0;
+}
+
+void solo_i2c_exit(struct solo_dev *solo_dev)
+{
+ int i;
+
+ for (i = 0; i < SOLO_I2C_ADAPTERS; i++) {
+ if (!solo_dev->i2c_adap[i].algo_data)
+ continue;
+ i2c_del_adapter(&solo_dev->i2c_adap[i]);
+ solo_dev->i2c_adap[i].algo_data = NULL;
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "solo6x10.h"
+
+static int multi_p2m;
+module_param(multi_p2m, uint, 0644);
+MODULE_PARM_DESC(multi_p2m,
+ "Use multiple P2M DMA channels (default: no, 6010-only)");
+
+static int desc_mode;
+module_param(desc_mode, uint, 0644);
+MODULE_PARM_DESC(desc_mode,
+ "Allow use of descriptor mode DMA (default: no, 6010-only)");
+
+int solo_p2m_dma(struct solo_dev *solo_dev, int wr,
+ void *sys_addr, u32 ext_addr, u32 size,
+ int repeat, u32 ext_size)
+{
+ dma_addr_t dma_addr;
+ int ret;
+
+ if (WARN_ON_ONCE((unsigned long)sys_addr & 0x03))
+ return -EINVAL;
+ if (WARN_ON_ONCE(!size))
+ return -EINVAL;
+
+ dma_addr = pci_map_single(solo_dev->pdev, sys_addr, size,
+ wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(solo_dev->pdev, dma_addr))
+ return -ENOMEM;
+
+ ret = solo_p2m_dma_t(solo_dev, wr, dma_addr, ext_addr, size,
+ repeat, ext_size);
+
+ pci_unmap_single(solo_dev->pdev, dma_addr, size,
+ wr ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+
+ return ret;
+}
+
+/* Mutex must be held for p2m_id before calling this!! */
+int solo_p2m_dma_desc(struct solo_dev *solo_dev,
+ struct solo_p2m_desc *desc, dma_addr_t desc_dma,
+ int desc_cnt)
+{
+ struct solo_p2m_dev *p2m_dev;
+ unsigned int timeout;
+ unsigned int config = 0;
+ int ret = 0;
+ int p2m_id = 0;
+
+ /* Get next ID. According to Softlogic, 6110 has problems on !=0 P2M */
+ if (solo_dev->type != SOLO_DEV_6110 && multi_p2m) {
+ p2m_id = atomic_inc_return(&solo_dev->p2m_count) % SOLO_NR_P2M;
+ if (p2m_id < 0)
+ p2m_id = -p2m_id;
+ }
+
+ p2m_dev = &solo_dev->p2m_dev[p2m_id];
+
+ if (mutex_lock_interruptible(&p2m_dev->mutex))
+ return -EINTR;
+
+ INIT_COMPLETION(p2m_dev->completion);
+ p2m_dev->error = 0;
+
+ if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && desc_mode) {
+ /* For 6010 with more than one desc, we can do a one-shot */
+ p2m_dev->desc_count = p2m_dev->desc_idx = 0;
+ config = solo_reg_read(solo_dev, SOLO_P2M_CONFIG(p2m_id));
+
+ solo_reg_write(solo_dev, SOLO_P2M_DES_ADR(p2m_id), desc_dma);
+ solo_reg_write(solo_dev, SOLO_P2M_DESC_ID(p2m_id), desc_cnt);
+ solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config |
+ SOLO_P2M_DESC_MODE);
+ } else {
+ /* For single descriptors and 6110, we need to run each desc */
+ p2m_dev->desc_count = desc_cnt;
+ p2m_dev->desc_idx = 1;
+ p2m_dev->descs = desc;
+
+ solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(p2m_id),
+ desc[1].dma_addr);
+ solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(p2m_id),
+ desc[1].ext_addr);
+ solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(p2m_id),
+ desc[1].cfg);
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id),
+ desc[1].ctrl);
+ }
+
+ timeout = wait_for_completion_timeout(&p2m_dev->completion,
+ solo_dev->p2m_jiffies);
+
+ if (WARN_ON_ONCE(p2m_dev->error))
+ ret = -EIO;
+ else if (timeout == 0) {
+ solo_dev->p2m_timeouts++;
+ ret = -EAGAIN;
+ }
+
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(p2m_id), 0);
+
+ /* Don't write here for the no_desc_mode case, because config is 0.
+ * We can't test no_desc_mode again, it might race. */
+ if (desc_cnt > 1 && solo_dev->type != SOLO_DEV_6110 && config)
+ solo_reg_write(solo_dev, SOLO_P2M_CONFIG(p2m_id), config);
+
+ mutex_unlock(&p2m_dev->mutex);
+
+ return ret;
+}
+
+void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr,
+ dma_addr_t dma_addr, u32 ext_addr, u32 size,
+ int repeat, u32 ext_size)
+{
+ WARN_ON_ONCE(dma_addr & 0x03);
+ WARN_ON_ONCE(!size);
+
+ desc->cfg = SOLO_P2M_COPY_SIZE(size >> 2);
+ desc->ctrl = SOLO_P2M_BURST_SIZE(SOLO_P2M_BURST_256) |
+ (wr ? SOLO_P2M_WRITE : 0) | SOLO_P2M_TRANS_ON;
+
+ if (repeat) {
+ desc->cfg |= SOLO_P2M_EXT_INC(ext_size >> 2);
+ desc->ctrl |= SOLO_P2M_PCI_INC(size >> 2) |
+ SOLO_P2M_REPEAT(repeat);
+ }
+
+ desc->dma_addr = dma_addr;
+ desc->ext_addr = ext_addr;
+}
+
+int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr,
+ dma_addr_t dma_addr, u32 ext_addr, u32 size,
+ int repeat, u32 ext_size)
+{
+ struct solo_p2m_desc desc[2];
+
+ solo_p2m_fill_desc(&desc[1], wr, dma_addr, ext_addr, size, repeat,
+ ext_size);
+
+ /* No need for desc_dma since we know it is a single-shot */
+ return solo_p2m_dma_desc(solo_dev, desc, 0, 1);
+}
+
+void solo_p2m_isr(struct solo_dev *solo_dev, int id)
+{
+ struct solo_p2m_dev *p2m_dev = &solo_dev->p2m_dev[id];
+ struct solo_p2m_desc *desc;
+
+ if (p2m_dev->desc_count <= p2m_dev->desc_idx) {
+ complete(&p2m_dev->completion);
+ return;
+ }
+
+ /* Setup next descriptor */
+ p2m_dev->desc_idx++;
+ desc = &p2m_dev->descs[p2m_dev->desc_idx];
+
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), 0);
+ solo_reg_write(solo_dev, SOLO_P2M_TAR_ADR(id), desc->dma_addr);
+ solo_reg_write(solo_dev, SOLO_P2M_EXT_ADR(id), desc->ext_addr);
+ solo_reg_write(solo_dev, SOLO_P2M_EXT_CFG(id), desc->cfg);
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(id), desc->ctrl);
+}
+
+void solo_p2m_error_isr(struct solo_dev *solo_dev)
+{
+ unsigned int err = solo_reg_read(solo_dev, SOLO_PCI_ERR);
+ struct solo_p2m_dev *p2m_dev;
+ int i;
+
+ if (!(err & (SOLO_PCI_ERR_P2M | SOLO_PCI_ERR_P2M_DESC)))
+ return;
+
+ for (i = 0; i < SOLO_NR_P2M; i++) {
+ p2m_dev = &solo_dev->p2m_dev[i];
+ p2m_dev->error = 1;
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+ complete(&p2m_dev->completion);
+ }
+}
+
+void solo_p2m_exit(struct solo_dev *solo_dev)
+{
+ int i;
+
+ for (i = 0; i < SOLO_NR_P2M; i++)
+ solo_irq_off(solo_dev, SOLO_IRQ_P2M(i));
+}
+
+static int solo_p2m_test(struct solo_dev *solo_dev, int base, int size)
+{
+ u32 *wr_buf;
+ u32 *rd_buf;
+ int i;
+ int ret = -EIO;
+ int order = get_order(size);
+
+ wr_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
+ if (wr_buf == NULL)
+ return -1;
+
+ rd_buf = (u32 *)__get_free_pages(GFP_KERNEL, order);
+ if (rd_buf == NULL) {
+ free_pages((unsigned long)wr_buf, order);
+ return -1;
+ }
+
+ for (i = 0; i < (size >> 3); i++)
+ *(wr_buf + i) = (i << 16) | (i + 1);
+
+ for (i = (size >> 3); i < (size >> 2); i++)
+ *(wr_buf + i) = ~((i << 16) | (i + 1));
+
+ memset(rd_buf, 0x55, size);
+
+ if (solo_p2m_dma(solo_dev, 1, wr_buf, base, size, 0, 0))
+ goto test_fail;
+
+ if (solo_p2m_dma(solo_dev, 0, rd_buf, base, size, 0, 0))
+ goto test_fail;
+
+ for (i = 0; i < (size >> 2); i++) {
+ if (*(wr_buf + i) != *(rd_buf + i))
+ goto test_fail;
+ }
+
+ ret = 0;
+
+test_fail:
+ free_pages((unsigned long)wr_buf, order);
+ free_pages((unsigned long)rd_buf, order);
+
+ return ret;
+}
+
+int solo_p2m_init(struct solo_dev *solo_dev)
+{
+ struct solo_p2m_dev *p2m_dev;
+ int i;
+
+ for (i = 0; i < SOLO_NR_P2M; i++) {
+ p2m_dev = &solo_dev->p2m_dev[i];
+
+ mutex_init(&p2m_dev->mutex);
+ init_completion(&p2m_dev->completion);
+
+ solo_reg_write(solo_dev, SOLO_P2M_CONTROL(i), 0);
+ solo_reg_write(solo_dev, SOLO_P2M_CONFIG(i),
+ SOLO_P2M_CSC_16BIT_565 |
+ SOLO_P2M_DESC_INTR_OPT |
+ SOLO_P2M_DMA_INTERVAL(0) |
+ SOLO_P2M_PCI_MASTER_MODE);
+ solo_irq_on(solo_dev, SOLO_IRQ_P2M(i));
+ }
+
+ /* Find correct SDRAM size */
+ for (solo_dev->sdram_size = 0, i = 2; i >= 0; i--) {
+ solo_reg_write(solo_dev, SOLO_DMA_CTRL,
+ SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
+ SOLO_DMA_CTRL_SDRAM_SIZE(i) |
+ SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
+ SOLO_DMA_CTRL_READ_CLK_SELECT |
+ SOLO_DMA_CTRL_LATENCY(1));
+
+ solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config |
+ SOLO_SYS_CFG_RESET);
+ solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config);
+
+ switch (i) {
+ case 2:
+ if (solo_p2m_test(solo_dev, 0x07ff0000, 0x00010000) ||
+ solo_p2m_test(solo_dev, 0x05ff0000, 0x00010000))
+ continue;
+ break;
+
+ case 1:
+ if (solo_p2m_test(solo_dev, 0x03ff0000, 0x00010000))
+ continue;
+ break;
+
+ default:
+ if (solo_p2m_test(solo_dev, 0x01ff0000, 0x00010000))
+ continue;
+ }
+
+ solo_dev->sdram_size = (32 << 20) << i;
+ break;
+ }
+
+ if (!solo_dev->sdram_size) {
+ dev_err(&solo_dev->pdev->dev, "Error detecting SDRAM size\n");
+ return -EIO;
+ }
+
+ if (SOLO_SDRAM_END(solo_dev) > solo_dev->sdram_size) {
+ dev_err(&solo_dev->pdev->dev,
+ "SDRAM is not large enough (%u < %u)\n",
+ solo_dev->sdram_size, SOLO_SDRAM_END(solo_dev));
+ return -EIO;
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include "solo6x10.h"
+#include "solo6x10-tw28.h"
+
+#define DEFAULT_HDELAY_NTSC (32 - 8)
+#define DEFAULT_HACTIVE_NTSC (720 + 16)
+#define DEFAULT_VDELAY_NTSC (7 - 2)
+#define DEFAULT_VACTIVE_NTSC (240 + 4)
+
+#define DEFAULT_HDELAY_PAL (32 + 4)
+#define DEFAULT_HACTIVE_PAL (864-DEFAULT_HDELAY_PAL)
+#define DEFAULT_VDELAY_PAL (6)
+#define DEFAULT_VACTIVE_PAL (312-DEFAULT_VDELAY_PAL)
+
+
+static const u8 tbl_tw2864_ntsc_template[] = {
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */
+ 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */
+ 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */
+ 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x30 */
+ 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00,
+ 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
+ 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00,
+ 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */
+ 0x00, 0x28, 0x44, 0x44, 0xa0, 0x88, 0x5a, 0x01,
+ 0x08, 0x08, 0x08, 0x08, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */
+ 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44,
+ 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
+ 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00,
+ 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */
+ 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81,
+ 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
+ 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+ 0x83, 0xb5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */
+ 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00,
+};
+
+static const u8 tbl_tw2864_pal_template[] = {
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */
+ 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */
+ 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */
+ 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */
+ 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00,
+ 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
+ 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00,
+ 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */
+ 0x00, 0x28, 0x44, 0x44, 0xa0, 0x90, 0x5a, 0x01,
+ 0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */
+ 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44,
+ 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
+ 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00,
+ 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */
+ 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81,
+ 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
+ 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+ 0x83, 0xb5, 0x09, 0x00, 0xa0, 0x00, 0x01, 0x20, /* 0xf0 */
+ 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00,
+};
+
+static const u8 tbl_tw2865_ntsc_template[] = {
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */
+ 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */
+ 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */
+ 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0xf0, 0x70, 0x48, 0x80, 0x80, 0x00, 0x02, /* 0x30 */
+ 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
+ 0x00, 0x00, 0x90, 0x68, 0x00, 0x38, 0x80, 0x80, /* 0x40 */
+ 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
+ 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */
+ 0xE9, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
+ 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
+ 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
+ 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */
+ 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
+ 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1B, 0x1A, /* 0xa0 */
+ 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
+ 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */
+ 0xFF, 0xE7, 0xE9, 0xE9, 0xEB, 0xFF, 0xD6, 0xD8,
+ 0xD8, 0xD7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
+ 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
+ 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */
+ 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
+ 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
+ 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+ 0x83, 0xB5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */
+ 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
+};
+
+static const u8 tbl_tw2865_pal_template[] = {
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */
+ 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */
+ 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */
+ 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */
+ 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
+ 0x00, 0x94, 0x90, 0x48, 0x00, 0x38, 0x7F, 0x80, /* 0x40 */
+ 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
+ 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */
+ 0xEA, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
+ 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
+ 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
+ 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */
+ 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
+ 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1A, /* 0xa0 */
+ 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
+ 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */
+ 0xFF, 0xE7, 0xE9, 0xE9, 0xE9, 0xFF, 0xD7, 0xD8,
+ 0xD9, 0xD8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
+ 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
+ 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */
+ 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
+ 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
+ 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
+ 0x83, 0xB5, 0x09, 0x00, 0xA0, 0x00, 0x01, 0x20, /* 0xf0 */
+ 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
+};
+
+#define is_tw286x(__solo, __id) (!(__solo->tw2815 & (1 << __id)))
+
+static u8 tw_readbyte(struct solo_dev *solo_dev, int chip_id, u8 tw6x_off,
+ u8 tw_off)
+{
+ if (is_tw286x(solo_dev, chip_id))
+ return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_id),
+ tw6x_off);
+ else
+ return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_id),
+ tw_off);
+}
+
+static void tw_writebyte(struct solo_dev *solo_dev, int chip_id,
+ u8 tw6x_off, u8 tw_off, u8 val)
+{
+ if (is_tw286x(solo_dev, chip_id))
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_id),
+ tw6x_off, val);
+ else
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_id),
+ tw_off, val);
+}
+
+static void tw_write_and_verify(struct solo_dev *solo_dev, u8 addr, u8 off,
+ u8 val)
+{
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ u8 rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, addr, off);
+ if (rval == val)
+ return;
+
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, addr, off, val);
+ msleep_interruptible(1);
+ }
+
+/* printk("solo6x10/tw28: Error writing register: %02x->%02x [%02x]\n", */
+/* addr, off, val); */
+}
+
+static int tw2865_setup(struct solo_dev *solo_dev, u8 dev_addr)
+{
+ u8 tbl_tw2865_common[256];
+ int i;
+
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL)
+ memcpy(tbl_tw2865_common, tbl_tw2865_pal_template,
+ sizeof(tbl_tw2865_common));
+ else
+ memcpy(tbl_tw2865_common, tbl_tw2865_ntsc_template,
+ sizeof(tbl_tw2865_common));
+
+ /* ALINK Mode */
+ if (solo_dev->nr_chans == 4) {
+ tbl_tw2865_common[0xd2] = 0x01;
+ tbl_tw2865_common[0xcf] = 0x00;
+ } else if (solo_dev->nr_chans == 8) {
+ tbl_tw2865_common[0xd2] = 0x02;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2865_common[0xcf] = 0x80;
+ } else if (solo_dev->nr_chans == 16) {
+ tbl_tw2865_common[0xd2] = 0x03;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2865_common[0xcf] = 0x83;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+ tbl_tw2865_common[0xcf] = 0x83;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+ tbl_tw2865_common[0xcf] = 0x80;
+ }
+
+ for (i = 0; i < 0xff; i++) {
+ /* Skip read only registers */
+ switch (i) {
+ case 0xb8 ... 0xc1:
+ case 0xc4 ... 0xc7:
+ case 0xfd:
+ continue;
+ }
+ switch (i & ~0x30) {
+ case 0x00:
+ case 0x0c ... 0x0d:
+ continue;
+ }
+
+ tw_write_and_verify(solo_dev, dev_addr, i,
+ tbl_tw2865_common[i]);
+ }
+
+ return 0;
+}
+
+static int tw2864_setup(struct solo_dev *solo_dev, u8 dev_addr)
+{
+ u8 tbl_tw2864_common[256];
+ int i;
+
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL)
+ memcpy(tbl_tw2864_common, tbl_tw2864_pal_template,
+ sizeof(tbl_tw2864_common));
+ else
+ memcpy(tbl_tw2864_common, tbl_tw2864_ntsc_template,
+ sizeof(tbl_tw2864_common));
+
+ if (solo_dev->tw2865 == 0) {
+ /* IRQ Mode */
+ if (solo_dev->nr_chans == 4) {
+ tbl_tw2864_common[0xd2] = 0x01;
+ tbl_tw2864_common[0xcf] = 0x00;
+ } else if (solo_dev->nr_chans == 8) {
+ tbl_tw2864_common[0xd2] = 0x02;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+ tbl_tw2864_common[0xcf] = 0x43;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2864_common[0xcf] = 0x40;
+ } else if (solo_dev->nr_chans == 16) {
+ tbl_tw2864_common[0xd2] = 0x03;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+ tbl_tw2864_common[0xcf] = 0x43;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2864_common[0xcf] = 0x43;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+ tbl_tw2864_common[0xcf] = 0x43;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+ tbl_tw2864_common[0xcf] = 0x40;
+ }
+ } else {
+ /* ALINK Mode. Assumes that the first tw28xx is a
+ * 2865 and these are in cascade. */
+ for (i = 0; i <= 4; i++)
+ tbl_tw2864_common[0x08 | i << 4] = 0x12;
+
+ if (solo_dev->nr_chans == 8) {
+ tbl_tw2864_common[0xd2] = 0x02;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2864_common[0xcf] = 0x80;
+ } else if (solo_dev->nr_chans == 16) {
+ tbl_tw2864_common[0xd2] = 0x03;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2864_common[0xcf] = 0x83;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+ tbl_tw2864_common[0xcf] = 0x83;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+ tbl_tw2864_common[0xcf] = 0x80;
+ }
+ }
+
+ for (i = 0; i < 0xff; i++) {
+ /* Skip read only registers */
+ switch (i) {
+ case 0xb8 ... 0xc1:
+ case 0xfd:
+ continue;
+ }
+ switch (i & ~0x30) {
+ case 0x00:
+ case 0x0c:
+ case 0x0d:
+ continue;
+ }
+
+ tw_write_and_verify(solo_dev, dev_addr, i,
+ tbl_tw2864_common[i]);
+ }
+
+ return 0;
+}
+
+static int tw2815_setup(struct solo_dev *solo_dev, u8 dev_addr)
+{
+ u8 tbl_ntsc_tw2815_common[] = {
+ 0x00, 0xc8, 0x20, 0xd0, 0x06, 0xf0, 0x08, 0x80,
+ 0x80, 0x80, 0x80, 0x02, 0x06, 0x00, 0x11,
+ };
+
+ u8 tbl_pal_tw2815_common[] = {
+ 0x00, 0x88, 0x20, 0xd0, 0x05, 0x20, 0x28, 0x80,
+ 0x80, 0x80, 0x80, 0x82, 0x06, 0x00, 0x11,
+ };
+
+ u8 tbl_tw2815_sfr[] = {
+ 0x00, 0x00, 0x00, 0xc0, 0x45, 0xa0, 0xd0, 0x2f, /* 0x00 */
+ 0x64, 0x80, 0x80, 0x82, 0x82, 0x00, 0x00, 0x00,
+ 0x00, 0x0f, 0x05, 0x00, 0x00, 0x80, 0x06, 0x00, /* 0x10 */
+ 0x00, 0x00, 0x00, 0xff, 0x8f, 0x00, 0x00, 0x00,
+ 0x88, 0x88, 0xc0, 0x00, 0x20, 0x64, 0xa8, 0xec, /* 0x20 */
+ 0x31, 0x75, 0xb9, 0xfd, 0x00, 0x00, 0x88, 0x88,
+ 0x88, 0x11, 0x00, 0x88, 0x88, 0x00, /* 0x30 */
+ };
+ u8 *tbl_tw2815_common;
+ int i;
+ int ch;
+
+ tbl_ntsc_tw2815_common[0x06] = 0;
+
+ /* Horizontal Delay Control */
+ tbl_ntsc_tw2815_common[0x02] = DEFAULT_HDELAY_NTSC & 0xff;
+ tbl_ntsc_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_NTSC >> 8);
+
+ /* Horizontal Active Control */
+ tbl_ntsc_tw2815_common[0x03] = DEFAULT_HACTIVE_NTSC & 0xff;
+ tbl_ntsc_tw2815_common[0x06] |=
+ ((0x03 & (DEFAULT_HACTIVE_NTSC >> 8)) << 2);
+
+ /* Vertical Delay Control */
+ tbl_ntsc_tw2815_common[0x04] = DEFAULT_VDELAY_NTSC & 0xff;
+ tbl_ntsc_tw2815_common[0x06] |=
+ ((0x01 & (DEFAULT_VDELAY_NTSC >> 8)) << 4);
+
+ /* Vertical Active Control */
+ tbl_ntsc_tw2815_common[0x05] = DEFAULT_VACTIVE_NTSC & 0xff;
+ tbl_ntsc_tw2815_common[0x06] |=
+ ((0x01 & (DEFAULT_VACTIVE_NTSC >> 8)) << 5);
+
+ tbl_pal_tw2815_common[0x06] = 0;
+
+ /* Horizontal Delay Control */
+ tbl_pal_tw2815_common[0x02] = DEFAULT_HDELAY_PAL & 0xff;
+ tbl_pal_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_PAL >> 8);
+
+ /* Horizontal Active Control */
+ tbl_pal_tw2815_common[0x03] = DEFAULT_HACTIVE_PAL & 0xff;
+ tbl_pal_tw2815_common[0x06] |=
+ ((0x03 & (DEFAULT_HACTIVE_PAL >> 8)) << 2);
+
+ /* Vertical Delay Control */
+ tbl_pal_tw2815_common[0x04] = DEFAULT_VDELAY_PAL & 0xff;
+ tbl_pal_tw2815_common[0x06] |=
+ ((0x01 & (DEFAULT_VDELAY_PAL >> 8)) << 4);
+
+ /* Vertical Active Control */
+ tbl_pal_tw2815_common[0x05] = DEFAULT_VACTIVE_PAL & 0xff;
+ tbl_pal_tw2815_common[0x06] |=
+ ((0x01 & (DEFAULT_VACTIVE_PAL >> 8)) << 5);
+
+ tbl_tw2815_common =
+ (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) ?
+ tbl_ntsc_tw2815_common : tbl_pal_tw2815_common;
+
+ /* Dual ITU-R BT.656 format */
+ tbl_tw2815_common[0x0d] |= 0x04;
+
+ /* Audio configuration */
+ tbl_tw2815_sfr[0x62 - 0x40] &= ~(3 << 6);
+
+ if (solo_dev->nr_chans == 4) {
+ tbl_tw2815_sfr[0x63 - 0x40] |= 1;
+ tbl_tw2815_sfr[0x62 - 0x40] |= 3 << 6;
+ } else if (solo_dev->nr_chans == 8) {
+ tbl_tw2815_sfr[0x63 - 0x40] |= 2;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
+ } else if (solo_dev->nr_chans == 16) {
+ tbl_tw2815_sfr[0x63 - 0x40] |= 3;
+ if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
+ else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
+ tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
+ }
+
+ /* Output mode of R_ADATM pin (0 mixing, 1 record) */
+ /* tbl_tw2815_sfr[0x63 - 0x40] |= 0 << 2; */
+
+ /* 8KHz, used to be 16KHz, but changed for remote client compat */
+ tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 2;
+ tbl_tw2815_sfr[0x6c - 0x40] |= 0 << 2;
+
+ /* Playback of right channel */
+ tbl_tw2815_sfr[0x6c - 0x40] |= 1 << 5;
+
+ /* Reserved value (XXX ??) */
+ tbl_tw2815_sfr[0x5c - 0x40] |= 1 << 5;
+
+ /* Analog output gain and mix ratio playback on full */
+ tbl_tw2815_sfr[0x70 - 0x40] |= 0xff;
+ /* Select playback audio and mute all except */
+ tbl_tw2815_sfr[0x71 - 0x40] |= 0x10;
+ tbl_tw2815_sfr[0x6d - 0x40] |= 0x0f;
+
+ /* End of audio configuration */
+
+ for (ch = 0; ch < 4; ch++) {
+ tbl_tw2815_common[0x0d] &= ~3;
+ switch (ch) {
+ case 0:
+ tbl_tw2815_common[0x0d] |= 0x21;
+ break;
+ case 1:
+ tbl_tw2815_common[0x0d] |= 0x20;
+ break;
+ case 2:
+ tbl_tw2815_common[0x0d] |= 0x23;
+ break;
+ case 3:
+ tbl_tw2815_common[0x0d] |= 0x22;
+ break;
+ }
+
+ for (i = 0; i < 0x0f; i++) {
+ if (i == 0x00)
+ continue; /* read-only */
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+ dev_addr, (ch * 0x10) + i,
+ tbl_tw2815_common[i]);
+ }
+ }
+
+ for (i = 0x40; i < 0x76; i++) {
+ /* Skip read-only and nop registers */
+ if (i == 0x40 || i == 0x59 || i == 0x5a ||
+ i == 0x5d || i == 0x5e || i == 0x5f)
+ continue;
+
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, dev_addr, i,
+ tbl_tw2815_sfr[i - 0x40]);
+ }
+
+ return 0;
+}
+
+#define FIRST_ACTIVE_LINE 0x0008
+#define LAST_ACTIVE_LINE 0x0102
+
+static void saa7128_setup(struct solo_dev *solo_dev)
+{
+ int i;
+ unsigned char regs[128] = {
+ 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x1C, 0x2B, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00,
+ 0x59, 0x1d, 0x75, 0x3f, 0x06, 0x3f, 0x00, 0x00,
+ 0x1c, 0x33, 0x00, 0x3f, 0x00, 0x00, 0x3f, 0x00,
+ 0x1a, 0x1a, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x68, 0x10, 0x97, 0x4c, 0x18,
+ 0x9b, 0x93, 0x9f, 0xff, 0x7c, 0x34, 0x3f, 0x3f,
+ 0x3f, 0x83, 0x83, 0x80, 0x0d, 0x0f, 0xc3, 0x06,
+ 0x02, 0x80, 0x71, 0x77, 0xa7, 0x67, 0x66, 0x2e,
+ 0x7b, 0x11, 0x4f, 0x1f, 0x7c, 0xf0, 0x21, 0x77,
+ 0x41, 0x88, 0x41, 0x12, 0xed, 0x10, 0x10, 0x00,
+ 0x41, 0xc3, 0x00, 0x3e, 0xb8, 0x02, 0x00, 0x00,
+ 0x00, 0x00, 0x08, 0xff, 0x80, 0x00, 0xff, 0xff,
+ };
+
+ regs[0x7A] = FIRST_ACTIVE_LINE & 0xff;
+ regs[0x7B] = LAST_ACTIVE_LINE & 0xff;
+ regs[0x7C] = ((1 << 7) |
+ (((LAST_ACTIVE_LINE >> 8) & 1) << 6) |
+ (((FIRST_ACTIVE_LINE >> 8) & 1) << 4));
+
+ /* PAL: XXX: We could do a second set of regs to avoid this */
+ if (solo_dev->video_type != SOLO_VO_FMT_TYPE_NTSC) {
+ regs[0x28] = 0xE1;
+
+ regs[0x5A] = 0x0F;
+ regs[0x61] = 0x02;
+ regs[0x62] = 0x35;
+ regs[0x63] = 0xCB;
+ regs[0x64] = 0x8A;
+ regs[0x65] = 0x09;
+ regs[0x66] = 0x2A;
+
+ regs[0x6C] = 0xf1;
+ regs[0x6E] = 0x20;
+
+ regs[0x7A] = 0x06 + 12;
+ regs[0x7b] = 0x24 + 12;
+ regs[0x7c] |= 1 << 6;
+ }
+
+ /* First 0x25 bytes are read-only? */
+ for (i = 0x26; i < 128; i++) {
+ if (i == 0x60 || i == 0x7D)
+ continue;
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_SAA, 0x46, i, regs[i]);
+ }
+
+ return;
+}
+
+int solo_tw28_init(struct solo_dev *solo_dev)
+{
+ int i;
+ u8 value;
+
+ solo_dev->tw28_cnt = 0;
+
+ /* Detect techwell chip type(s) */
+ for (i = 0; i < solo_dev->nr_chans / 4; i++) {
+ value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(i), 0xFF);
+
+ switch (value >> 3) {
+ case 0x18:
+ solo_dev->tw2865 |= 1 << i;
+ solo_dev->tw28_cnt++;
+ break;
+ case 0x0c:
+ solo_dev->tw2864 |= 1 << i;
+ solo_dev->tw28_cnt++;
+ break;
+ default:
+ value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(i),
+ 0x59);
+ if ((value >> 3) == 0x04) {
+ solo_dev->tw2815 |= 1 << i;
+ solo_dev->tw28_cnt++;
+ }
+ }
+ }
+
+ if (solo_dev->tw28_cnt != (solo_dev->nr_chans >> 2)) {
+ dev_err(&solo_dev->pdev->dev,
+ "Could not initialize any techwell chips\n");
+ return -EINVAL;
+ }
+
+ saa7128_setup(solo_dev);
+
+ for (i = 0; i < solo_dev->tw28_cnt; i++) {
+ if ((solo_dev->tw2865 & (1 << i)))
+ tw2865_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+ else if ((solo_dev->tw2864 & (1 << i)))
+ tw2864_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+ else
+ tw2815_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
+ }
+
+ return 0;
+}
+
+/*
+ * We accessed the video status signal in the Techwell chip through
+ * iic/i2c because the video status reported by register REG_VI_STATUS1
+ * (address 0x012C) of the SOLO6010 chip doesn't give the correct video
+ * status signal values.
+ */
+int tw28_get_video_status(struct solo_dev *solo_dev, u8 ch)
+{
+ u8 val, chip_num;
+
+ /* Get the right chip and on-chip channel */
+ chip_num = ch / 4;
+ ch %= 4;
+
+ val = tw_readbyte(solo_dev, chip_num, TW286x_AV_STAT_ADDR,
+ TW_AV_STAT_ADDR) & 0x0f;
+
+ return val & (1 << ch) ? 1 : 0;
+}
+
+#if 0
+/* Status of audio from up to 4 techwell chips are combined into 1 variable.
+ * See techwell datasheet for details. */
+u16 tw28_get_audio_status(struct solo_dev *solo_dev)
+{
+ u8 val;
+ u16 status = 0;
+ int i;
+
+ for (i = 0; i < solo_dev->tw28_cnt; i++) {
+ val = (tw_readbyte(solo_dev, i, TW286x_AV_STAT_ADDR,
+ TW_AV_STAT_ADDR) & 0xf0) >> 4;
+ status |= val << (i * 4);
+ }
+
+ return status;
+}
+#endif
+
+bool tw28_has_sharpness(struct solo_dev *solo_dev, u8 ch)
+{
+ return is_tw286x(solo_dev, ch / 4);
+}
+
+int tw28_set_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch,
+ s32 val)
+{
+ char sval;
+ u8 chip_num;
+
+ /* Get the right chip and on-chip channel */
+ chip_num = ch / 4;
+ ch %= 4;
+
+ if (val > 255 || val < 0)
+ return -ERANGE;
+
+ switch (ctrl) {
+ case V4L2_CID_SHARPNESS:
+ /* Only 286x has sharpness */
+ if (is_tw286x(solo_dev, chip_num)) {
+ u8 v = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_num),
+ TW286x_SHARPNESS(chip_num));
+ v &= 0xf0;
+ v |= val;
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_num),
+ TW286x_SHARPNESS(chip_num), v);
+ } else {
+ return -EINVAL;
+ }
+ break;
+
+ case V4L2_CID_HUE:
+ if (is_tw286x(solo_dev, chip_num))
+ sval = val - 128;
+ else
+ sval = (char)val;
+ tw_writebyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
+ TW_HUE_ADDR(ch), sval);
+
+ break;
+
+ case V4L2_CID_SATURATION:
+ /* 286x chips have a U and V component for saturation */
+ if (is_tw286x(solo_dev, chip_num)) {
+ solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_num),
+ TW286x_SATURATIONU_ADDR(ch), val);
+ }
+ tw_writebyte(solo_dev, chip_num, TW286x_SATURATIONV_ADDR(ch),
+ TW_SATURATION_ADDR(ch), val);
+
+ break;
+
+ case V4L2_CID_CONTRAST:
+ tw_writebyte(solo_dev, chip_num, TW286x_CONTRAST_ADDR(ch),
+ TW_CONTRAST_ADDR(ch), val);
+ break;
+
+ case V4L2_CID_BRIGHTNESS:
+ if (is_tw286x(solo_dev, chip_num))
+ sval = val - 128;
+ else
+ sval = (char)val;
+ tw_writebyte(solo_dev, chip_num, TW286x_BRIGHTNESS_ADDR(ch),
+ TW_BRIGHTNESS_ADDR(ch), sval);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int tw28_get_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch,
+ s32 *val)
+{
+ u8 rval, chip_num;
+
+ /* Get the right chip and on-chip channel */
+ chip_num = ch / 4;
+ ch %= 4;
+
+ switch (ctrl) {
+ case V4L2_CID_SHARPNESS:
+ /* Only 286x has sharpness */
+ if (is_tw286x(solo_dev, chip_num)) {
+ rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
+ TW_CHIP_OFFSET_ADDR(chip_num),
+ TW286x_SHARPNESS(chip_num));
+ *val = rval & 0x0f;
+ } else
+ *val = 0;
+ break;
+ case V4L2_CID_HUE:
+ rval = tw_readbyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
+ TW_HUE_ADDR(ch));
+ if (is_tw286x(solo_dev, chip_num))
+ *val = (s32)((char)rval) + 128;
+ else
+ *val = rval;
+ break;
+ case V4L2_CID_SATURATION:
+ *val = tw_readbyte(solo_dev, chip_num,
+ TW286x_SATURATIONU_ADDR(ch),
+ TW_SATURATION_ADDR(ch));
+ break;
+ case V4L2_CID_CONTRAST:
+ *val = tw_readbyte(solo_dev, chip_num,
+ TW286x_CONTRAST_ADDR(ch),
+ TW_CONTRAST_ADDR(ch));
+ break;
+ case V4L2_CID_BRIGHTNESS:
+ rval = tw_readbyte(solo_dev, chip_num,
+ TW286x_BRIGHTNESS_ADDR(ch),
+ TW_BRIGHTNESS_ADDR(ch));
+ if (is_tw286x(solo_dev, chip_num))
+ *val = (s32)((char)rval) + 128;
+ else
+ *val = rval;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#if 0
+/*
+ * For audio output volume, the output channel is only 1. In this case we
+ * don't need to offset TW_CHIP_OFFSET_ADDR. The TW_CHIP_OFFSET_ADDR used
+ * is the base address of the techwell chip.
+ */
+void tw2815_Set_AudioOutVol(struct solo_dev *solo_dev, unsigned int u_val)
+{
+ unsigned int val;
+ unsigned int chip_num;
+
+ chip_num = (solo_dev->nr_chans - 1) / 4;
+
+ val = tw_readbyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
+ TW_AUDIO_OUTPUT_VOL_ADDR);
+
+ u_val = (val & 0x0f) | (u_val << 4);
+
+ tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
+ TW_AUDIO_OUTPUT_VOL_ADDR, u_val);
+}
+#endif
+
+u8 tw28_get_audio_gain(struct solo_dev *solo_dev, u8 ch)
+{
+ u8 val;
+ u8 chip_num;
+
+ /* Get the right chip and on-chip channel */
+ chip_num = ch / 4;
+ ch %= 4;
+
+ val = tw_readbyte(solo_dev, chip_num,
+ TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+ TW_AUDIO_INPUT_GAIN_ADDR(ch));
+
+ return (ch % 2) ? (val >> 4) : (val & 0x0f);
+}
+
+void tw28_set_audio_gain(struct solo_dev *solo_dev, u8 ch, u8 val)
+{
+ u8 old_val;
+ u8 chip_num;
+
+ /* Get the right chip and on-chip channel */
+ chip_num = ch / 4;
+ ch %= 4;
+
+ old_val = tw_readbyte(solo_dev, chip_num,
+ TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+ TW_AUDIO_INPUT_GAIN_ADDR(ch));
+
+ val = (old_val & ((ch % 2) ? 0x0f : 0xf0)) |
+ ((ch % 2) ? (val << 4) : val);
+
+ tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
+ TW_AUDIO_INPUT_GAIN_ADDR(ch), val);
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-dma-sg.h>
+
+#include "solo6x10.h"
+#include "solo6x10-tw28.h"
+#include "solo6x10-jpeg.h"
+
+#define MIN_VID_BUFFERS 2
+#define FRAME_BUF_SIZE (196 * 1024)
+#define MP4_QS 16
+#define DMA_ALIGN 4096
+
+/* 6010 M4V */
+static unsigned char vop_6010_ntsc_d1[] = {
+ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
+ 0x02, 0x48, 0x1d, 0xc0, 0x00, 0x40, 0x00, 0x40,
+ 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
+ 0x1f, 0x4c, 0x58, 0x10, 0xf0, 0x71, 0x18, 0x3f,
+};
+
+static unsigned char vop_6010_ntsc_cif[] = {
+ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
+ 0x02, 0x48, 0x1d, 0xc0, 0x00, 0x40, 0x00, 0x40,
+ 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
+ 0x1f, 0x4c, 0x2c, 0x10, 0x78, 0x51, 0x18, 0x3f,
+};
+
+static unsigned char vop_6010_pal_d1[] = {
+ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
+ 0x02, 0x48, 0x15, 0xc0, 0x00, 0x40, 0x00, 0x40,
+ 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
+ 0x1f, 0x4c, 0x58, 0x11, 0x20, 0x71, 0x18, 0x3f,
+};
+
+static unsigned char vop_6010_pal_cif[] = {
+ 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
+ 0x02, 0x48, 0x15, 0xc0, 0x00, 0x40, 0x00, 0x40,
+ 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
+ 0x1f, 0x4c, 0x2c, 0x10, 0x90, 0x51, 0x18, 0x3f,
+};
+
+/* 6110 h.264 */
+static unsigned char vop_6110_ntsc_d1[] = {
+ 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
+ 0x9a, 0x74, 0x05, 0x81, 0xec, 0x80, 0x00, 0x00,
+ 0x00, 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00,
+};
+
+static unsigned char vop_6110_ntsc_cif[] = {
+ 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
+ 0x9a, 0x74, 0x0b, 0x0f, 0xc8, 0x00, 0x00, 0x00,
+ 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00, 0x00,
+};
+
+static unsigned char vop_6110_pal_d1[] = {
+ 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
+ 0x9a, 0x74, 0x05, 0x80, 0x93, 0x20, 0x00, 0x00,
+ 0x00, 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00,
+};
+
+static unsigned char vop_6110_pal_cif[] = {
+ 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
+ 0x9a, 0x74, 0x0b, 0x04, 0xb2, 0x00, 0x00, 0x00,
+ 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00, 0x00,
+};
+
+struct vop_header {
+ /* VE_STATUS0 */
+ u32 mpeg_size:20, sad_motion_flag:1, video_motion_flag:1, vop_type:2,
+ channel:5, source_fl:1, interlace:1, progressive:1;
+
+ /* VE_STATUS1 */
+ u32 vsize:8, hsize:8, last_queue:4, nop0:8, scale:4;
+
+ /* VE_STATUS2 */
+ u32 mpeg_off;
+
+ /* VE_STATUS3 */
+ u32 jpeg_off;
+
+ /* VE_STATUS4 */
+ u32 jpeg_size:20, interval:10, nop1:2;
+
+ /* VE_STATUS5/6 */
+ u32 sec, usec;
+
+ /* VE_STATUS7/8/9 */
+ u32 nop2[3];
+
+ /* VE_STATUS10 */
+ u32 mpeg_size_alt:20, nop3:12;
+
+ u32 end_nops[5];
+} __packed;
+
+struct solo_enc_buf {
+ enum solo_enc_types type;
+ struct vop_header *vh;
+ int motion;
+};
+
+static int solo_is_motion_on(struct solo_enc_dev *solo_enc)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ return (solo_dev->motion_mask >> solo_enc->ch) & 1;
+}
+
+static int solo_motion_detected(struct solo_enc_dev *solo_enc)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ unsigned long flags;
+ u32 ch_mask = 1 << solo_enc->ch;
+ int ret = 0;
+
+ spin_lock_irqsave(&solo_enc->motion_lock, flags);
+ if (solo_reg_read(solo_dev, SOLO_VI_MOT_STATUS) & ch_mask) {
+ solo_reg_write(solo_dev, SOLO_VI_MOT_CLEAR, ch_mask);
+ ret = 1;
+ }
+ spin_unlock_irqrestore(&solo_enc->motion_lock, flags);
+
+ return ret;
+}
+
+static void solo_motion_toggle(struct solo_enc_dev *solo_enc, int on)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ u32 mask = 1 << solo_enc->ch;
+ unsigned long flags;
+
+ spin_lock_irqsave(&solo_enc->motion_lock, flags);
+
+ if (on)
+ solo_dev->motion_mask |= mask;
+ else
+ solo_dev->motion_mask &= ~mask;
+
+ solo_reg_write(solo_dev, SOLO_VI_MOT_CLEAR, mask);
+
+ solo_reg_write(solo_dev, SOLO_VI_MOT_ADR,
+ SOLO_VI_MOTION_EN(solo_dev->motion_mask) |
+ (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
+
+ spin_unlock_irqrestore(&solo_enc->motion_lock, flags);
+}
+
+void solo_update_mode(struct solo_enc_dev *solo_enc)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ int vop_len;
+ unsigned char *vop;
+
+ solo_enc->interlaced = (solo_enc->mode & 0x08) ? 1 : 0;
+ solo_enc->bw_weight = max(solo_dev->fps / solo_enc->interval, 1);
+
+ if (solo_enc->mode == SOLO_ENC_MODE_CIF) {
+ solo_enc->width = solo_dev->video_hsize >> 1;
+ solo_enc->height = solo_dev->video_vsize;
+ if (solo_dev->type == SOLO_DEV_6110) {
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ vop = vop_6110_ntsc_cif;
+ vop_len = sizeof(vop_6110_ntsc_cif);
+ } else {
+ vop = vop_6110_pal_cif;
+ vop_len = sizeof(vop_6110_pal_cif);
+ }
+ } else {
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ vop = vop_6010_ntsc_cif;
+ vop_len = sizeof(vop_6010_ntsc_cif);
+ } else {
+ vop = vop_6010_pal_cif;
+ vop_len = sizeof(vop_6010_pal_cif);
+ }
+ }
+ } else {
+ solo_enc->width = solo_dev->video_hsize;
+ solo_enc->height = solo_dev->video_vsize << 1;
+ solo_enc->bw_weight <<= 2;
+ if (solo_dev->type == SOLO_DEV_6110) {
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ vop = vop_6110_ntsc_d1;
+ vop_len = sizeof(vop_6110_ntsc_d1);
+ } else {
+ vop = vop_6110_pal_d1;
+ vop_len = sizeof(vop_6110_pal_d1);
+ }
+ } else {
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
+ vop = vop_6010_ntsc_d1;
+ vop_len = sizeof(vop_6010_ntsc_d1);
+ } else {
+ vop = vop_6010_pal_d1;
+ vop_len = sizeof(vop_6010_pal_d1);
+ }
+ }
+ }
+
+ memcpy(solo_enc->vop, vop, vop_len);
+
+ /* Some fixups for 6010/M4V */
+ if (solo_dev->type == SOLO_DEV_6010) {
+ u16 fps = solo_dev->fps * 1000;
+ u16 interval = solo_enc->interval * 1000;
+
+ vop = solo_enc->vop;
+
+ /* Frame rate and interval */
+ vop[22] = fps >> 4;
+ vop[23] = ((fps << 4) & 0xf0) | 0x0c
+ | ((interval >> 13) & 0x3);
+ vop[24] = (interval >> 5) & 0xff;
+ vop[25] = ((interval << 3) & 0xf8) | 0x04;
+ }
+
+ solo_enc->vop_len = vop_len;
+
+ /* Now handle the jpeg header */
+ vop = solo_enc->jpeg_header;
+ vop[SOF0_START + 5] = 0xff & (solo_enc->height >> 8);
+ vop[SOF0_START + 6] = 0xff & solo_enc->height;
+ vop[SOF0_START + 7] = 0xff & (solo_enc->width >> 8);
+ vop[SOF0_START + 8] = 0xff & solo_enc->width;
+
+ memcpy(vop + DQT_START,
+ jpeg_dqt[solo_g_jpeg_qp(solo_dev, solo_enc->ch)], DQT_LEN);
+}
+
+static int solo_enc_on(struct solo_enc_dev *solo_enc)
+{
+ u8 ch = solo_enc->ch;
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ u8 interval;
+
+ solo_update_mode(solo_enc);
+
+ /* Make sure to do a bandwidth check */
+ if (solo_enc->bw_weight > solo_dev->enc_bw_remain)
+ return -EBUSY;
+ solo_enc->sequence = 0;
+ solo_dev->enc_bw_remain -= solo_enc->bw_weight;
+
+ if (solo_enc->type == SOLO_ENC_TYPE_EXT)
+ solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(ch), 1);
+
+ /* Disable all encoding for this channel */
+ solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), 0);
+
+ /* Common for both std and ext encoding */
+ solo_reg_write(solo_dev, SOLO_VE_CH_INTL(ch),
+ solo_enc->interlaced ? 1 : 0);
+
+ if (solo_enc->interlaced)
+ interval = solo_enc->interval - 1;
+ else
+ interval = solo_enc->interval;
+
+ /* Standard encoding only */
+ solo_reg_write(solo_dev, SOLO_VE_CH_GOP(ch), solo_enc->gop);
+ solo_reg_write(solo_dev, SOLO_VE_CH_QP(ch), solo_enc->qp);
+ solo_reg_write(solo_dev, SOLO_CAP_CH_INTV(ch), interval);
+
+ /* Extended encoding only */
+ solo_reg_write(solo_dev, SOLO_VE_CH_GOP_E(ch), solo_enc->gop);
+ solo_reg_write(solo_dev, SOLO_VE_CH_QP_E(ch), solo_enc->qp);
+ solo_reg_write(solo_dev, SOLO_CAP_CH_INTV_E(ch), interval);
+
+ /* Enables the standard encoder */
+ solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), solo_enc->mode);
+
+ return 0;
+}
+
+static void solo_enc_off(struct solo_enc_dev *solo_enc)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ solo_dev->enc_bw_remain += solo_enc->bw_weight;
+
+ solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(solo_enc->ch), 0);
+ solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(solo_enc->ch), 0);
+}
+
+static int enc_get_mpeg_dma(struct solo_dev *solo_dev, dma_addr_t dma,
+ unsigned int off, unsigned int size)
+{
+ int ret;
+
+ if (off > SOLO_MP4E_EXT_SIZE(solo_dev))
+ return -EINVAL;
+
+ /* Single shot */
+ if (off + size <= SOLO_MP4E_EXT_SIZE(solo_dev)) {
+ return solo_p2m_dma_t(solo_dev, 0, dma,
+ SOLO_MP4E_EXT_ADDR(solo_dev) + off, size,
+ 0, 0);
+ }
+
+ /* Buffer wrap */
+ ret = solo_p2m_dma_t(solo_dev, 0, dma,
+ SOLO_MP4E_EXT_ADDR(solo_dev) + off,
+ SOLO_MP4E_EXT_SIZE(solo_dev) - off, 0, 0);
+
+ if (!ret) {
+ ret = solo_p2m_dma_t(solo_dev, 0,
+ dma + SOLO_MP4E_EXT_SIZE(solo_dev) - off,
+ SOLO_MP4E_EXT_ADDR(solo_dev),
+ size + off - SOLO_MP4E_EXT_SIZE(solo_dev), 0, 0);
+ }
+
+ return ret;
+}
+
+/* Build a descriptor queue out of an SG list and send it to the P2M for
+ * processing. */
+static int solo_send_desc(struct solo_enc_dev *solo_enc, int skip,
+ struct vb2_dma_sg_desc *vbuf, int off, int size,
+ unsigned int base, unsigned int base_size)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct scatterlist *sg;
+ int i;
+ int ret;
+
+ if (WARN_ON_ONCE(size > FRAME_BUF_SIZE))
+ return -EINVAL;
+
+ solo_enc->desc_count = 1;
+
+ for_each_sg(vbuf->sglist, sg, vbuf->num_pages, i) {
+ struct solo_p2m_desc *desc;
+ dma_addr_t dma;
+ int len;
+ int left = base_size - off;
+
+ desc = &solo_enc->desc_items[solo_enc->desc_count++];
+ dma = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+
+ /* We assume this is smaller than the scatter size */
+ BUG_ON(skip >= len);
+ if (skip) {
+ len -= skip;
+ dma += skip;
+ size -= skip;
+ skip = 0;
+ }
+
+ len = min(len, size);
+
+ if (len <= left) {
+ /* Single descriptor */
+ solo_p2m_fill_desc(desc, 0, dma, base + off,
+ len, 0, 0);
+ } else {
+ /* Buffer wrap */
+ /* XXX: Do these as separate DMA requests, to avoid
+ timeout errors triggered by awkwardly sized
+ descriptors. See
+ <https://github.com/bluecherrydvr/solo6x10/issues/8>
+ */
+ ret = solo_p2m_dma_t(solo_dev, 0, dma, base + off,
+ left, 0, 0);
+ if (ret)
+ return ret;
+
+ ret = solo_p2m_dma_t(solo_dev, 0, dma + left, base,
+ len - left, 0, 0);
+ if (ret)
+ return ret;
+
+ solo_enc->desc_count--;
+ }
+
+ size -= len;
+ if (size <= 0)
+ break;
+
+ off += len;
+ if (off >= base_size)
+ off -= base_size;
+
+ /* Because we may use two descriptors per loop */
+ if (solo_enc->desc_count >= (solo_enc->desc_nelts - 1)) {
+ ret = solo_p2m_dma_desc(solo_dev, solo_enc->desc_items,
+ solo_enc->desc_dma,
+ solo_enc->desc_count - 1);
+ if (ret)
+ return ret;
+ solo_enc->desc_count = 1;
+ }
+ }
+
+ if (solo_enc->desc_count <= 1)
+ return 0;
+
+ return solo_p2m_dma_desc(solo_dev, solo_enc->desc_items, solo_enc->desc_dma,
+ solo_enc->desc_count - 1);
+}
+
+static int solo_fill_jpeg(struct solo_enc_dev *solo_enc,
+ struct vb2_buffer *vb, struct vop_header *vh)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct vb2_dma_sg_desc *vbuf = vb2_dma_sg_plane_desc(vb, 0);
+ int frame_size;
+ int ret;
+
+ vb->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
+
+ if (vb2_plane_size(vb, 0) < vh->jpeg_size + solo_enc->jpeg_len)
+ return -EIO;
+
+ sg_copy_from_buffer(vbuf->sglist, vbuf->num_pages,
+ solo_enc->jpeg_header,
+ solo_enc->jpeg_len);
+
+ frame_size = (vh->jpeg_size + solo_enc->jpeg_len + (DMA_ALIGN - 1))
+ & ~(DMA_ALIGN - 1);
+ vb2_set_plane_payload(vb, 0, vh->jpeg_size + solo_enc->jpeg_len);
+
+ dma_map_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
+ DMA_FROM_DEVICE);
+ ret = solo_send_desc(solo_enc, solo_enc->jpeg_len, vbuf, vh->jpeg_off,
+ frame_size, SOLO_JPEG_EXT_ADDR(solo_dev),
+ SOLO_JPEG_EXT_SIZE(solo_dev));
+ dma_unmap_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
+ DMA_FROM_DEVICE);
+ return ret;
+}
+
+static int solo_fill_mpeg(struct solo_enc_dev *solo_enc,
+ struct vb2_buffer *vb, struct vop_header *vh)
+{
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct vb2_dma_sg_desc *vbuf = vb2_dma_sg_plane_desc(vb, 0);
+ int frame_off, frame_size;
+ int skip = 0;
+ int ret;
+
+ if (vb2_plane_size(vb, 0) < vh->mpeg_size)
+ return -EIO;
+
+ /* If this is a key frame, add extra header */
+ if (!vh->vop_type) {
+ sg_copy_from_buffer(vbuf->sglist, vbuf->num_pages,
+ solo_enc->vop,
+ solo_enc->vop_len);
+
+ skip = solo_enc->vop_len;
+
+ vb->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
+ vb2_set_plane_payload(vb, 0, vh->mpeg_size + solo_enc->vop_len);
+ } else {
+ vb->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME;
+ vb2_set_plane_payload(vb, 0, vh->mpeg_size);
+ }
+
+ /* Now get the actual mpeg payload */
+ frame_off = (vh->mpeg_off + sizeof(*vh))
+ % SOLO_MP4E_EXT_SIZE(solo_dev);
+ frame_size = (vh->mpeg_size + skip + (DMA_ALIGN - 1))
+ & ~(DMA_ALIGN - 1);
+
+ dma_map_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
+ DMA_FROM_DEVICE);
+ ret = solo_send_desc(solo_enc, skip, vbuf, frame_off, frame_size,
+ SOLO_MP4E_EXT_ADDR(solo_dev),
+ SOLO_MP4E_EXT_SIZE(solo_dev));
+ dma_unmap_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
+ DMA_FROM_DEVICE);
+ return ret;
+}
+
+static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
+ struct vb2_buffer *vb, struct solo_enc_buf *enc_buf)
+{
+ struct vop_header *vh = enc_buf->vh;
+ int ret;
+
+ /* Check for motion flags */
+ vb->v4l2_buf.flags &= ~(V4L2_BUF_FLAG_MOTION_ON |
+ V4L2_BUF_FLAG_MOTION_DETECTED);
+ if (solo_is_motion_on(solo_enc)) {
+ vb->v4l2_buf.flags |= V4L2_BUF_FLAG_MOTION_ON;
+ if (enc_buf->motion)
+ vb->v4l2_buf.flags |= V4L2_BUF_FLAG_MOTION_DETECTED;
+ }
+
+ if (solo_enc->fmt == V4L2_PIX_FMT_MPEG4)
+ ret = solo_fill_mpeg(solo_enc, vb, vh);
+ else
+ ret = solo_fill_jpeg(solo_enc, vb, vh);
+
+ if (!ret) {
+ vb->v4l2_buf.sequence = solo_enc->sequence++;
+ vb->v4l2_buf.timestamp.tv_sec = vh->sec;
+ vb->v4l2_buf.timestamp.tv_usec = vh->usec;
+ }
+
+ vb2_buffer_done(vb, ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+
+ return ret;
+}
+
+static void solo_enc_handle_one(struct solo_enc_dev *solo_enc,
+ struct solo_enc_buf *enc_buf)
+{
+ struct solo_vb2_buf *vb;
+ unsigned long flags;
+
+ mutex_lock(&solo_enc->lock);
+ if (solo_enc->type != enc_buf->type)
+ goto unlock;
+
+ spin_lock_irqsave(&solo_enc->av_lock, flags);
+ if (list_empty(&solo_enc->vidq_active)) {
+ spin_unlock_irqrestore(&solo_enc->av_lock, flags);
+ goto unlock;
+ }
+ vb = list_first_entry(&solo_enc->vidq_active, struct solo_vb2_buf, list);
+ list_del(&vb->list);
+ spin_unlock_irqrestore(&solo_enc->av_lock, flags);
+
+ solo_enc_fillbuf(solo_enc, &vb->vb, enc_buf);
+unlock:
+ mutex_unlock(&solo_enc->lock);
+}
+
+void solo_enc_v4l2_isr(struct solo_dev *solo_dev)
+{
+ wake_up_interruptible_all(&solo_dev->ring_thread_wait);
+}
+
+static void solo_handle_ring(struct solo_dev *solo_dev)
+{
+ for (;;) {
+ struct solo_enc_dev *solo_enc;
+ struct solo_enc_buf enc_buf;
+ u32 mpeg_current, off;
+ u8 ch;
+ u8 cur_q;
+
+ /* Check if the hardware has any new ones in the queue */
+ cur_q = solo_reg_read(solo_dev, SOLO_VE_STATE(11)) & 0xff;
+ if (cur_q == solo_dev->enc_idx)
+ break;
+
+ mpeg_current = solo_reg_read(solo_dev,
+ SOLO_VE_MPEG4_QUE(solo_dev->enc_idx));
+ solo_dev->enc_idx = (solo_dev->enc_idx + 1) % MP4_QS;
+
+ ch = (mpeg_current >> 24) & 0x1f;
+ off = mpeg_current & 0x00ffffff;
+
+ if (ch >= SOLO_MAX_CHANNELS) {
+ ch -= SOLO_MAX_CHANNELS;
+ enc_buf.type = SOLO_ENC_TYPE_EXT;
+ } else
+ enc_buf.type = SOLO_ENC_TYPE_STD;
+
+ solo_enc = solo_dev->v4l2_enc[ch];
+ if (solo_enc == NULL) {
+ dev_err(&solo_dev->pdev->dev,
+ "Got spurious packet for channel %d\n", ch);
+ continue;
+ }
+
+ /* FAIL... */
+ if (enc_get_mpeg_dma(solo_dev, solo_dev->vh_dma, off,
+ sizeof(struct vop_header)))
+ continue;
+
+ enc_buf.vh = (struct vop_header *)solo_dev->vh_buf;
+ enc_buf.vh->mpeg_off -= SOLO_MP4E_EXT_ADDR(solo_dev);
+ enc_buf.vh->jpeg_off -= SOLO_JPEG_EXT_ADDR(solo_dev);
+
+ /* Sanity check */
+ if (enc_buf.vh->mpeg_off != off)
+ continue;
+
+ if (solo_motion_detected(solo_enc))
+ enc_buf.motion = 1;
+ else
+ enc_buf.motion = 0;
+
+ solo_enc_handle_one(solo_enc, &enc_buf);
+ }
+}
+
+static int solo_ring_thread(void *data)
+{
+ struct solo_dev *solo_dev = data;
+ DECLARE_WAITQUEUE(wait, current);
+
+ set_freezable();
+ add_wait_queue(&solo_dev->ring_thread_wait, &wait);
+
+ for (;;) {
+ long timeout = schedule_timeout_interruptible(HZ);
+ if (timeout == -ERESTARTSYS || kthread_should_stop())
+ break;
+ solo_irq_off(solo_dev, SOLO_IRQ_ENCODER);
+ solo_handle_ring(solo_dev);
+ solo_irq_on(solo_dev, SOLO_IRQ_ENCODER);
+ try_to_freeze();
+ }
+
+ remove_wait_queue(&solo_dev->ring_thread_wait, &wait);
+
+ return 0;
+}
+
+static int solo_enc_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ sizes[0] = FRAME_BUF_SIZE;
+ *num_planes = 1;
+
+ if (*num_buffers < MIN_VID_BUFFERS)
+ *num_buffers = MIN_VID_BUFFERS;
+
+ return 0;
+}
+
+static void solo_enc_buf_queue(struct vb2_buffer *vb)
+{
+ struct vb2_queue *vq = vb->vb2_queue;
+ struct solo_enc_dev *solo_enc = vb2_get_drv_priv(vq);
+ struct solo_vb2_buf *solo_vb =
+ container_of(vb, struct solo_vb2_buf, vb);
+
+ spin_lock(&solo_enc->av_lock);
+ list_add_tail(&solo_vb->list, &solo_enc->vidq_active);
+ spin_unlock(&solo_enc->av_lock);
+}
+
+static int solo_ring_start(struct solo_dev *solo_dev)
+{
+ solo_dev->ring_thread = kthread_run(solo_ring_thread, solo_dev,
+ SOLO6X10_NAME "_ring");
+ if (IS_ERR(solo_dev->ring_thread)) {
+ int err = PTR_ERR(solo_dev->ring_thread);
+ solo_dev->ring_thread = NULL;
+ return err;
+ }
+
+ solo_irq_on(solo_dev, SOLO_IRQ_ENCODER);
+
+ return 0;
+}
+
+static void solo_ring_stop(struct solo_dev *solo_dev)
+{
+ if (solo_dev->ring_thread) {
+ kthread_stop(solo_dev->ring_thread);
+ solo_dev->ring_thread = NULL;
+ }
+
+ solo_irq_off(solo_dev, SOLO_IRQ_ENCODER);
+}
+
+static int solo_enc_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct solo_enc_dev *solo_enc = vb2_get_drv_priv(q);
+ int ret;
+
+ ret = solo_enc_on(solo_enc);
+ if (ret)
+ return ret;
+ return solo_ring_start(solo_enc->solo_dev);
+}
+
+static int solo_enc_stop_streaming(struct vb2_queue *q)
+{
+ struct solo_enc_dev *solo_enc = vb2_get_drv_priv(q);
+
+ solo_enc_off(solo_enc);
+ INIT_LIST_HEAD(&solo_enc->vidq_active);
+ solo_ring_stop(solo_enc->solo_dev);
+ return 0;
+}
+
+static struct vb2_ops solo_enc_video_qops = {
+ .queue_setup = solo_enc_queue_setup,
+ .buf_queue = solo_enc_buf_queue,
+ .start_streaming = solo_enc_start_streaming,
+ .stop_streaming = solo_enc_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static int solo_enc_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ strcpy(cap->driver, SOLO6X10_NAME);
+ snprintf(cap->card, sizeof(cap->card), "Softlogic 6x10 Enc %d",
+ solo_enc->ch);
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
+ pci_name(solo_dev->pdev));
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int solo_enc_enum_input(struct file *file, void *priv,
+ struct v4l2_input *input)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ if (input->index)
+ return -EINVAL;
+
+ snprintf(input->name, sizeof(input->name), "Encoder %d",
+ solo_enc->ch + 1);
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+ input->std = solo_enc->vfd->tvnorms;
+
+ if (!tw28_get_video_status(solo_dev, solo_enc->ch))
+ input->status = V4L2_IN_ST_NO_SIGNAL;
+
+ return 0;
+}
+
+static int solo_enc_set_input(struct file *file, void *priv,
+ unsigned int index)
+{
+ if (index)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int solo_enc_get_input(struct file *file, void *priv,
+ unsigned int *index)
+{
+ *index = 0;
+
+ return 0;
+}
+
+static int solo_enc_enum_fmt_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ switch (f->index) {
+ case 0:
+ f->pixelformat = V4L2_PIX_FMT_MPEG4;
+ strcpy(f->description, "MPEG-4 AVC");
+ break;
+ case 1:
+ f->pixelformat = V4L2_PIX_FMT_MJPEG;
+ strcpy(f->description, "MJPEG");
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ f->flags = V4L2_FMT_FLAG_COMPRESSED;
+
+ return 0;
+}
+
+static int solo_enc_try_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ if (pix->pixelformat != V4L2_PIX_FMT_MPEG4 &&
+ pix->pixelformat != V4L2_PIX_FMT_MJPEG)
+ return -EINVAL;
+
+ if (pix->width < solo_dev->video_hsize ||
+ pix->height < solo_dev->video_vsize << 1) {
+ /* Default to CIF 1/2 size */
+ pix->width = solo_dev->video_hsize >> 1;
+ pix->height = solo_dev->video_vsize;
+ } else {
+ /* Full frame */
+ pix->width = solo_dev->video_hsize;
+ pix->height = solo_dev->video_vsize << 1;
+ }
+
+ switch (pix->field) {
+ case V4L2_FIELD_NONE:
+ case V4L2_FIELD_INTERLACED:
+ break;
+ case V4L2_FIELD_ANY:
+ default:
+ pix->field = V4L2_FIELD_INTERLACED;
+ break;
+ }
+
+ /* Just set these */
+ pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ pix->sizeimage = FRAME_BUF_SIZE;
+ pix->bytesperline = 0;
+ pix->priv = 0;
+
+ return 0;
+}
+
+static int solo_enc_set_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ int ret;
+
+ if (vb2_is_busy(&solo_enc->vidq))
+ return -EBUSY;
+
+ ret = solo_enc_try_fmt_cap(file, priv, f);
+ if (ret)
+ return ret;
+
+ if (pix->width == solo_dev->video_hsize)
+ solo_enc->mode = SOLO_ENC_MODE_D1;
+ else
+ solo_enc->mode = SOLO_ENC_MODE_CIF;
+
+ /* This does not change the encoder at all */
+ solo_enc->fmt = pix->pixelformat;
+
+ /*
+ * More information is needed about these 'extended' types. As far
+ * as I can tell these are basically additional video streams with
+ * different MPEG encoding attributes that can run in parallel with
+ * the main stream. If so, then this should be implemented as a
+ * second video node. Abusing priv like this is certainly not the
+ * right approach.
+ if (pix->priv)
+ solo_enc->type = SOLO_ENC_TYPE_EXT;
+ */
+ return 0;
+}
+
+static int solo_enc_get_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ pix->width = solo_enc->width;
+ pix->height = solo_enc->height;
+ pix->pixelformat = solo_enc->fmt;
+ pix->field = solo_enc->interlaced ? V4L2_FIELD_INTERLACED :
+ V4L2_FIELD_NONE;
+ pix->sizeimage = FRAME_BUF_SIZE;
+ pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ pix->priv = 0;
+
+ return 0;
+}
+
+static int solo_enc_g_std(struct file *file, void *priv, v4l2_std_id *i)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
+ *i = V4L2_STD_NTSC_M;
+ else
+ *i = V4L2_STD_PAL;
+ return 0;
+}
+
+static int solo_enc_s_std(struct file *file, void *priv, v4l2_std_id std)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+
+ return solo_set_video_type(solo_enc->solo_dev, std & V4L2_STD_PAL);
+}
+
+static int solo_enum_framesizes(struct file *file, void *priv,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ if (fsize->pixel_format != V4L2_PIX_FMT_MPEG4 &&
+ fsize->pixel_format != V4L2_PIX_FMT_MJPEG)
+ return -EINVAL;
+
+ switch (fsize->index) {
+ case 0:
+ fsize->discrete.width = solo_dev->video_hsize >> 1;
+ fsize->discrete.height = solo_dev->video_vsize;
+ break;
+ case 1:
+ fsize->discrete.width = solo_dev->video_hsize;
+ fsize->discrete.height = solo_dev->video_vsize << 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+
+ return 0;
+}
+
+static int solo_enum_frameintervals(struct file *file, void *priv,
+ struct v4l2_frmivalenum *fintv)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+
+ if (fintv->pixel_format != V4L2_PIX_FMT_MPEG4 &&
+ fintv->pixel_format != V4L2_PIX_FMT_MJPEG)
+ return -EINVAL;
+ if (fintv->index)
+ return -EINVAL;
+ if ((fintv->width != solo_dev->video_hsize >> 1 ||
+ fintv->height != solo_dev->video_vsize) &&
+ (fintv->width != solo_dev->video_hsize ||
+ fintv->height != solo_dev->video_vsize << 1))
+ return -EINVAL;
+
+ fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
+
+ fintv->stepwise.min.numerator = 1;
+ fintv->stepwise.min.denominator = solo_dev->fps;
+
+ fintv->stepwise.max.numerator = 15;
+ fintv->stepwise.max.denominator = solo_dev->fps;
+
+ fintv->stepwise.step.numerator = 1;
+ fintv->stepwise.step.denominator = solo_dev->fps;
+
+ return 0;
+}
+
+static int solo_g_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *sp)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct v4l2_captureparm *cp = &sp->parm.capture;
+
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ cp->timeperframe.numerator = solo_enc->interval;
+ cp->timeperframe.denominator = solo_dev->fps;
+ cp->capturemode = 0;
+ /* XXX: Shouldn't we be able to get/set this from videobuf? */
+ cp->readbuffers = 2;
+
+ return 0;
+}
+
+static int solo_s_parm(struct file *file, void *priv,
+ struct v4l2_streamparm *sp)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct v4l2_captureparm *cp = &sp->parm.capture;
+
+ if (vb2_is_streaming(&solo_enc->vidq))
+ return -EBUSY;
+
+ if ((cp->timeperframe.numerator == 0) ||
+ (cp->timeperframe.denominator == 0)) {
+ /* reset framerate */
+ cp->timeperframe.numerator = 1;
+ cp->timeperframe.denominator = solo_dev->fps;
+ }
+
+ if (cp->timeperframe.denominator != solo_dev->fps)
+ cp->timeperframe.denominator = solo_dev->fps;
+
+ if (cp->timeperframe.numerator > 15)
+ cp->timeperframe.numerator = 15;
+
+ solo_enc->interval = cp->timeperframe.numerator;
+
+ cp->capability = V4L2_CAP_TIMEPERFRAME;
+ cp->readbuffers = 2;
+
+ solo_update_mode(solo_enc);
+ return 0;
+}
+
+static long solo_enc_default(struct file *file, void *fh,
+ bool valid_prio, int cmd, void *arg)
+{
+ struct solo_enc_dev *solo_enc = video_drvdata(file);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ struct solo_motion_thresholds *thresholds = arg;
+
+ switch (cmd) {
+ case SOLO_IOC_G_MOTION_THRESHOLDS:
+ *thresholds = solo_enc->motion_thresholds;
+ return 0;
+
+ case SOLO_IOC_S_MOTION_THRESHOLDS:
+ if (!valid_prio)
+ return -EBUSY;
+ solo_enc->motion_thresholds = *thresholds;
+ if (solo_enc->motion_enabled && !solo_enc->motion_global)
+ return solo_set_motion_block(solo_dev, solo_enc->ch,
+ &solo_enc->motion_thresholds);
+ return 0;
+ default:
+ return -ENOTTY;
+ }
+}
+
+static int solo_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct solo_enc_dev *solo_enc =
+ container_of(ctrl->handler, struct solo_enc_dev, hdl);
+ struct solo_dev *solo_dev = solo_enc->solo_dev;
+ int err;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ case V4L2_CID_HUE:
+ case V4L2_CID_SHARPNESS:
+ return tw28_set_ctrl_val(solo_dev, ctrl->id, solo_enc->ch,
+ ctrl->val);
+ case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
+ solo_enc->gop = ctrl->val;
+ return 0;
+ case V4L2_CID_MOTION_THRESHOLD:
+ solo_enc->motion_thresh = ctrl->val;
+ if (!solo_enc->motion_global || !solo_enc->motion_enabled)
+ return 0;
+ return solo_set_motion_threshold(solo_dev, solo_enc->ch, ctrl->val);
+ case V4L2_CID_MOTION_MODE:
+ solo_enc->motion_global = ctrl->val == 1;
+ solo_enc->motion_enabled = ctrl->val > 0;
+ if (ctrl->val) {
+ if (solo_enc->motion_global)
+ solo_set_motion_threshold(solo_dev, solo_enc->ch,
+ solo_enc->motion_thresh);
+ else
+ solo_set_motion_block(solo_dev, solo_enc->ch,
+ &solo_enc->motion_thresholds);
+ }
+ solo_motion_toggle(solo_enc, ctrl->val);
+ return 0;
+ case V4L2_CID_OSD_TEXT:
+ strcpy(solo_enc->osd_text, ctrl->string);
+ err = solo_osd_print(solo_enc);
+ return err;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct v4l2_file_operations solo_enc_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops solo_enc_ioctl_ops = {
+ .vidioc_querycap = solo_enc_querycap,
+ .vidioc_s_std = solo_enc_s_std,
+ .vidioc_g_std = solo_enc_g_std,
+ /* Input callbacks */
+ .vidioc_enum_input = solo_enc_enum_input,
+ .vidioc_s_input = solo_enc_set_input,
+ .vidioc_g_input = solo_enc_get_input,
+ /* Video capture format callbacks */
+ .vidioc_enum_fmt_vid_cap = solo_enc_enum_fmt_cap,
+ .vidioc_try_fmt_vid_cap = solo_enc_try_fmt_cap,
+ .vidioc_s_fmt_vid_cap = solo_enc_set_fmt_cap,
+ .vidioc_g_fmt_vid_cap = solo_enc_get_fmt_cap,
+ /* Streaming I/O */
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ /* Frame size and interval */
+ .vidioc_enum_framesizes = solo_enum_framesizes,
+ .vidioc_enum_frameintervals = solo_enum_frameintervals,
+ /* Video capture parameters */
+ .vidioc_s_parm = solo_s_parm,
+ .vidioc_g_parm = solo_g_parm,
+ /* Logging and events */
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+ .vidioc_default = solo_enc_default,
+};
+
+static const struct video_device solo_enc_template = {
+ .name = SOLO6X10_NAME,
+ .fops = &solo_enc_fops,
+ .ioctl_ops = &solo_enc_ioctl_ops,
+ .minor = -1,
+ .release = video_device_release,
+ .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL,
+};
+
+static const struct v4l2_ctrl_ops solo_ctrl_ops = {
+ .s_ctrl = solo_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config solo_motion_threshold_ctrl = {
+ .ops = &solo_ctrl_ops,
+ .id = V4L2_CID_MOTION_THRESHOLD,
+ .name = "Motion Detection Threshold",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .max = 0xffff,
+ .def = SOLO_DEF_MOT_THRESH,
+ .step = 1,
+ .flags = V4L2_CTRL_FLAG_SLIDER,
+};
+
+static const char * const solo_motion_mode_menu[] = {
+ "Disabled",
+ "Global Threshold",
+ "Regional Threshold",
+ NULL
+};
+
+static const struct v4l2_ctrl_config solo_motion_enable_ctrl = {
+ .ops = &solo_ctrl_ops,
+ .id = V4L2_CID_MOTION_MODE,
+ .name = "Motion Detection Mode",
+ .type = V4L2_CTRL_TYPE_MENU,
+ .qmenu = solo_motion_mode_menu,
+ .max = 2,
+};
+
+static const struct v4l2_ctrl_config solo_osd_text_ctrl = {
+ .ops = &solo_ctrl_ops,
+ .id = V4L2_CID_OSD_TEXT,
+ .name = "OSD Text",
+ .type = V4L2_CTRL_TYPE_STRING,
+ .max = OSD_TEXT_MAX,
+ .step = 1,
+};
+
+static struct solo_enc_dev *solo_enc_alloc(struct solo_dev *solo_dev,
+ u8 ch, unsigned nr)
+{
+ struct solo_enc_dev *solo_enc;
+ struct v4l2_ctrl_handler *hdl;
+ int ret;
+ int x, y;
+
+ solo_enc = kzalloc(sizeof(*solo_enc), GFP_KERNEL);
+ if (!solo_enc)
+ return ERR_PTR(-ENOMEM);
+
+ hdl = &solo_enc->hdl;
+ v4l2_ctrl_handler_init(hdl, 10);
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_HUE, 0, 255, 1, 128);
+ if (tw28_has_sharpness(solo_dev, ch))
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_SHARPNESS, 0, 15, 1, 0);
+ v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
+ V4L2_CID_MPEG_VIDEO_GOP_SIZE, 1, 255, 1, solo_dev->fps);
+ v4l2_ctrl_new_custom(hdl, &solo_motion_threshold_ctrl, NULL);
+ v4l2_ctrl_new_custom(hdl, &solo_motion_enable_ctrl, NULL);
+ v4l2_ctrl_new_custom(hdl, &solo_osd_text_ctrl, NULL);
+ if (hdl->error) {
+ ret = hdl->error;
+ goto hdl_free;
+ }
+
+ solo_enc->solo_dev = solo_dev;
+ solo_enc->ch = ch;
+ mutex_init(&solo_enc->lock);
+ spin_lock_init(&solo_enc->av_lock);
+ INIT_LIST_HEAD(&solo_enc->vidq_active);
+ solo_enc->fmt = V4L2_PIX_FMT_MPEG4;
+ solo_enc->type = SOLO_ENC_TYPE_STD;
+
+ solo_enc->qp = SOLO_DEFAULT_QP;
+ solo_enc->gop = solo_dev->fps;
+ solo_enc->interval = 1;
+ solo_enc->mode = SOLO_ENC_MODE_CIF;
+ solo_enc->motion_global = true;
+ solo_enc->motion_thresh = SOLO_DEF_MOT_THRESH;
+ for (y = 0; y < SOLO_MOTION_SZ; y++)
+ for (x = 0; x < SOLO_MOTION_SZ; x++)
+ solo_enc->motion_thresholds.thresholds[y][x] =
+ SOLO_DEF_MOT_THRESH;
+
+ solo_enc->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ solo_enc->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+ solo_enc->vidq.ops = &solo_enc_video_qops;
+ solo_enc->vidq.mem_ops = &vb2_dma_sg_memops;
+ solo_enc->vidq.drv_priv = solo_enc;
+ solo_enc->vidq.gfp_flags = __GFP_DMA32;
+ solo_enc->vidq.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ solo_enc->vidq.buf_struct_size = sizeof(struct solo_vb2_buf);
+ solo_enc->vidq.lock = &solo_enc->lock;
+ ret = vb2_queue_init(&solo_enc->vidq);
+ if (ret)
+ goto hdl_free;
+ solo_update_mode(solo_enc);
+
+ spin_lock_init(&solo_enc->motion_lock);
+
+ /* Initialize this per encoder */
+ solo_enc->jpeg_len = sizeof(jpeg_header);
+ memcpy(solo_enc->jpeg_header, jpeg_header, solo_enc->jpeg_len);
+
+ solo_enc->desc_nelts = 32;
+ solo_enc->desc_items = pci_alloc_consistent(solo_dev->pdev,
+ sizeof(struct solo_p2m_desc) *
+ solo_enc->desc_nelts, &solo_enc->desc_dma);
+ ret = -ENOMEM;
+ if (solo_enc->desc_items == NULL)
+ goto hdl_free;
+
+ solo_enc->vfd = video_device_alloc();
+ if (!solo_enc->vfd)
+ goto pci_free;
+
+ *solo_enc->vfd = solo_enc_template;
+ solo_enc->vfd->v4l2_dev = &solo_dev->v4l2_dev;
+ solo_enc->vfd->ctrl_handler = hdl;
+ solo_enc->vfd->queue = &solo_enc->vidq;
+ solo_enc->vfd->lock = &solo_enc->lock;
+ set_bit(V4L2_FL_USE_FH_PRIO, &solo_enc->vfd->flags);
+ video_set_drvdata(solo_enc->vfd, solo_enc);
+ ret = video_register_device(solo_enc->vfd, VFL_TYPE_GRABBER, nr);
+ if (ret < 0)
+ goto vdev_release;
+
+ snprintf(solo_enc->vfd->name, sizeof(solo_enc->vfd->name),
+ "%s-enc (%i/%i)", SOLO6X10_NAME, solo_dev->vfd->num,
+ solo_enc->vfd->num);
+
+ return solo_enc;
+
+vdev_release:
+ video_device_release(solo_enc->vfd);
+pci_free:
+ pci_free_consistent(solo_enc->solo_dev->pdev,
+ sizeof(struct solo_p2m_desc) * solo_enc->desc_nelts,
+ solo_enc->desc_items, solo_enc->desc_dma);
+hdl_free:
+ v4l2_ctrl_handler_free(hdl);
+ kfree(solo_enc);
+ return ERR_PTR(ret);
+}
+
+static void solo_enc_free(struct solo_enc_dev *solo_enc)
+{
+ if (solo_enc == NULL)
+ return;
+
+ video_unregister_device(solo_enc->vfd);
+ v4l2_ctrl_handler_free(&solo_enc->hdl);
+ kfree(solo_enc);
+}
+
+int solo_enc_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
+{
+ int i;
+
+ init_waitqueue_head(&solo_dev->ring_thread_wait);
+
+ solo_dev->vh_size = sizeof(struct vop_header);
+ solo_dev->vh_buf = pci_alloc_consistent(solo_dev->pdev,
+ solo_dev->vh_size,
+ &solo_dev->vh_dma);
+ if (solo_dev->vh_buf == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_dev->v4l2_enc[i] = solo_enc_alloc(solo_dev, i, nr);
+ if (IS_ERR(solo_dev->v4l2_enc[i]))
+ break;
+ }
+
+ if (i != solo_dev->nr_chans) {
+ int ret = PTR_ERR(solo_dev->v4l2_enc[i]);
+ while (i--)
+ solo_enc_free(solo_dev->v4l2_enc[i]);
+ pci_free_consistent(solo_dev->pdev, solo_dev->vh_size,
+ solo_dev->vh_buf, solo_dev->vh_dma);
+ solo_dev->vh_buf = NULL;
+ return ret;
+ }
+
+ if (solo_dev->type == SOLO_DEV_6010)
+ solo_dev->enc_bw_remain = solo_dev->fps * 4 * 4;
+ else
+ solo_dev->enc_bw_remain = solo_dev->fps * 4 * 5;
+
+ dev_info(&solo_dev->pdev->dev, "Encoders as /dev/video%d-%d\n",
+ solo_dev->v4l2_enc[0]->vfd->num,
+ solo_dev->v4l2_enc[solo_dev->nr_chans - 1]->vfd->num);
+
+ return 0;
+}
+
+void solo_enc_v4l2_exit(struct solo_dev *solo_dev)
+{
+ int i;
+
+ for (i = 0; i < solo_dev->nr_chans; i++)
+ solo_enc_free(solo_dev->v4l2_enc[i]);
+
+ if (solo_dev->vh_buf)
+ pci_free_consistent(solo_dev->pdev, solo_dev->vh_size,
+ solo_dev->vh_buf, solo_dev->vh_dma);
+}
--- /dev/null
+/*
+ * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
+ *
+ * Original author:
+ * Ben Collins <bcollins@ubuntu.com>
+ *
+ * Additional work by:
+ * John Brooks <john.brooks@bluecherry.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "solo6x10.h"
+#include "solo6x10-tw28.h"
+
+/* Image size is two fields, SOLO_HW_BPL is one horizontal line in hardware */
+#define SOLO_HW_BPL 2048
+#define solo_vlines(__solo) (__solo->video_vsize * 2)
+#define solo_image_size(__solo) (solo_bytesperline(__solo) * \
+ solo_vlines(__solo))
+#define solo_bytesperline(__solo) (__solo->video_hsize * 2)
+
+#define MIN_VID_BUFFERS 2
+
+static inline void erase_on(struct solo_dev *solo_dev)
+{
+ solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
+ solo_dev->erasing = 1;
+ solo_dev->frame_blank = 0;
+}
+
+static inline int erase_off(struct solo_dev *solo_dev)
+{
+ if (!solo_dev->erasing)
+ return 0;
+
+ /* First time around, assert erase off */
+ if (!solo_dev->frame_blank)
+ solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, 0);
+ /* Keep the erasing flag on for 8 frames minimum */
+ if (solo_dev->frame_blank++ >= 8)
+ solo_dev->erasing = 0;
+
+ return 1;
+}
+
+void solo_video_in_isr(struct solo_dev *solo_dev)
+{
+ wake_up_interruptible_all(&solo_dev->disp_thread_wait);
+}
+
+static void solo_win_setup(struct solo_dev *solo_dev, u8 ch,
+ int sx, int sy, int ex, int ey, int scale)
+{
+ if (ch >= solo_dev->nr_chans)
+ return;
+
+ /* Here, we just keep window/channel the same */
+ solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(ch),
+ SOLO_VI_WIN_CHANNEL(ch) |
+ SOLO_VI_WIN_SX(sx) |
+ SOLO_VI_WIN_EX(ex) |
+ SOLO_VI_WIN_SCALE(scale));
+
+ solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(ch),
+ SOLO_VI_WIN_SY(sy) |
+ SOLO_VI_WIN_EY(ey));
+}
+
+static int solo_v4l2_ch_ext_4up(struct solo_dev *solo_dev, u8 idx, int on)
+{
+ u8 ch = idx * 4;
+
+ if (ch >= solo_dev->nr_chans)
+ return -EINVAL;
+
+ if (!on) {
+ u8 i;
+ for (i = ch; i < ch + 4; i++)
+ solo_win_setup(solo_dev, i, solo_dev->video_hsize,
+ solo_vlines(solo_dev),
+ solo_dev->video_hsize,
+ solo_vlines(solo_dev), 0);
+ return 0;
+ }
+
+ /* Row 1 */
+ solo_win_setup(solo_dev, ch, 0, 0, solo_dev->video_hsize / 2,
+ solo_vlines(solo_dev) / 2, 3);
+ solo_win_setup(solo_dev, ch + 1, solo_dev->video_hsize / 2, 0,
+ solo_dev->video_hsize, solo_vlines(solo_dev) / 2, 3);
+ /* Row 2 */
+ solo_win_setup(solo_dev, ch + 2, 0, solo_vlines(solo_dev) / 2,
+ solo_dev->video_hsize / 2, solo_vlines(solo_dev), 3);
+ solo_win_setup(solo_dev, ch + 3, solo_dev->video_hsize / 2,
+ solo_vlines(solo_dev) / 2, solo_dev->video_hsize,
+ solo_vlines(solo_dev), 3);
+
+ return 0;
+}
+
+static int solo_v4l2_ch_ext_16up(struct solo_dev *solo_dev, int on)
+{
+ int sy, ysize, hsize, i;
+
+ if (!on) {
+ for (i = 0; i < 16; i++)
+ solo_win_setup(solo_dev, i, solo_dev->video_hsize,
+ solo_vlines(solo_dev),
+ solo_dev->video_hsize,
+ solo_vlines(solo_dev), 0);
+ return 0;
+ }
+
+ ysize = solo_vlines(solo_dev) / 4;
+ hsize = solo_dev->video_hsize / 4;
+
+ for (sy = 0, i = 0; i < 4; i++, sy += ysize) {
+ solo_win_setup(solo_dev, i * 4, 0, sy, hsize,
+ sy + ysize, 5);
+ solo_win_setup(solo_dev, (i * 4) + 1, hsize, sy,
+ hsize * 2, sy + ysize, 5);
+ solo_win_setup(solo_dev, (i * 4) + 2, hsize * 2, sy,
+ hsize * 3, sy + ysize, 5);
+ solo_win_setup(solo_dev, (i * 4) + 3, hsize * 3, sy,
+ solo_dev->video_hsize, sy + ysize, 5);
+ }
+
+ return 0;
+}
+
+static int solo_v4l2_ch(struct solo_dev *solo_dev, u8 ch, int on)
+{
+ u8 ext_ch;
+
+ if (ch < solo_dev->nr_chans) {
+ solo_win_setup(solo_dev, ch, on ? 0 : solo_dev->video_hsize,
+ on ? 0 : solo_vlines(solo_dev),
+ solo_dev->video_hsize, solo_vlines(solo_dev),
+ on ? 1 : 0);
+ return 0;
+ }
+
+ if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
+ return -EINVAL;
+
+ ext_ch = ch - solo_dev->nr_chans;
+
+ /* 4up's first */
+ if (ext_ch < 4)
+ return solo_v4l2_ch_ext_4up(solo_dev, ext_ch, on);
+
+ /* Remaining case is 16up for 16-port */
+ return solo_v4l2_ch_ext_16up(solo_dev, on);
+}
+
+static int solo_v4l2_set_ch(struct solo_dev *solo_dev, u8 ch)
+{
+ if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
+ return -EINVAL;
+
+ erase_on(solo_dev);
+
+ solo_v4l2_ch(solo_dev, solo_dev->cur_disp_ch, 0);
+ solo_v4l2_ch(solo_dev, ch, 1);
+
+ solo_dev->cur_disp_ch = ch;
+
+ return 0;
+}
+
+static void solo_fillbuf(struct solo_dev *solo_dev,
+ struct vb2_buffer *vb)
+{
+ dma_addr_t vbuf;
+ unsigned int fdma_addr;
+ int error = -1;
+ int i;
+
+ vbuf = vb2_dma_contig_plane_dma_addr(vb, 0);
+ if (!vbuf)
+ goto finish_buf;
+
+ if (erase_off(solo_dev)) {
+ void *p = vb2_plane_vaddr(vb, 0);
+ int image_size = solo_image_size(solo_dev);
+ for (i = 0; i < image_size; i += 2) {
+ ((u8 *)p)[i] = 0x80;
+ ((u8 *)p)[i + 1] = 0x00;
+ }
+ error = 0;
+ } else {
+ fdma_addr = SOLO_DISP_EXT_ADDR + (solo_dev->old_write *
+ (SOLO_HW_BPL * solo_vlines(solo_dev)));
+
+ error = solo_p2m_dma_t(solo_dev, 0, vbuf, fdma_addr,
+ solo_bytesperline(solo_dev),
+ solo_vlines(solo_dev), SOLO_HW_BPL);
+ }
+
+finish_buf:
+ if (!error) {
+ vb2_set_plane_payload(vb, 0,
+ solo_vlines(solo_dev) * solo_bytesperline(solo_dev));
+ vb->v4l2_buf.sequence = solo_dev->sequence++;
+ v4l2_get_timestamp(&vb->v4l2_buf.timestamp);
+ }
+
+ vb2_buffer_done(vb, error ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
+}
+
+static void solo_thread_try(struct solo_dev *solo_dev)
+{
+ struct solo_vb2_buf *vb;
+
+ /* Only "break" from this loop if slock is held, otherwise
+ * just return. */
+ for (;;) {
+ unsigned int cur_write;
+
+ cur_write = SOLO_VI_STATUS0_PAGE(
+ solo_reg_read(solo_dev, SOLO_VI_STATUS0));
+ if (cur_write == solo_dev->old_write)
+ return;
+
+ spin_lock(&solo_dev->slock);
+
+ if (list_empty(&solo_dev->vidq_active))
+ break;
+
+ vb = list_first_entry(&solo_dev->vidq_active, struct solo_vb2_buf,
+ list);
+
+ solo_dev->old_write = cur_write;
+ list_del(&vb->list);
+
+ spin_unlock(&solo_dev->slock);
+
+ solo_fillbuf(solo_dev, &vb->vb);
+ }
+
+ assert_spin_locked(&solo_dev->slock);
+ spin_unlock(&solo_dev->slock);
+}
+
+static int solo_thread(void *data)
+{
+ struct solo_dev *solo_dev = data;
+ DECLARE_WAITQUEUE(wait, current);
+
+ set_freezable();
+ add_wait_queue(&solo_dev->disp_thread_wait, &wait);
+
+ for (;;) {
+ long timeout = schedule_timeout_interruptible(HZ);
+ if (timeout == -ERESTARTSYS || kthread_should_stop())
+ break;
+ solo_thread_try(solo_dev);
+ try_to_freeze();
+ }
+
+ remove_wait_queue(&solo_dev->disp_thread_wait, &wait);
+
+ return 0;
+}
+
+static int solo_start_thread(struct solo_dev *solo_dev)
+{
+ int ret = 0;
+
+ solo_dev->kthread = kthread_run(solo_thread, solo_dev, SOLO6X10_NAME "_disp");
+
+ if (IS_ERR(solo_dev->kthread)) {
+ ret = PTR_ERR(solo_dev->kthread);
+ solo_dev->kthread = NULL;
+ return ret;
+ }
+ solo_irq_on(solo_dev, SOLO_IRQ_VIDEO_IN);
+
+ return ret;
+}
+
+static void solo_stop_thread(struct solo_dev *solo_dev)
+{
+ if (!solo_dev->kthread)
+ return;
+
+ solo_irq_off(solo_dev, SOLO_IRQ_VIDEO_IN);
+ kthread_stop(solo_dev->kthread);
+ solo_dev->kthread = NULL;
+}
+
+static int solo_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct solo_dev *solo_dev = vb2_get_drv_priv(q);
+
+ sizes[0] = solo_image_size(solo_dev);
+ alloc_ctxs[0] = solo_dev->alloc_ctx;
+ *num_planes = 1;
+
+ if (*num_buffers < MIN_VID_BUFFERS)
+ *num_buffers = MIN_VID_BUFFERS;
+
+ return 0;
+}
+
+static int solo_start_streaming(struct vb2_queue *q, unsigned int count)
+{
+ struct solo_dev *solo_dev = vb2_get_drv_priv(q);
+
+ solo_dev->sequence = 0;
+ return solo_start_thread(solo_dev);
+}
+
+static int solo_stop_streaming(struct vb2_queue *q)
+{
+ struct solo_dev *solo_dev = vb2_get_drv_priv(q);
+
+ solo_stop_thread(solo_dev);
+ INIT_LIST_HEAD(&solo_dev->vidq_active);
+ return 0;
+}
+
+static void solo_buf_queue(struct vb2_buffer *vb)
+{
+ struct vb2_queue *vq = vb->vb2_queue;
+ struct solo_dev *solo_dev = vb2_get_drv_priv(vq);
+ struct solo_vb2_buf *solo_vb =
+ container_of(vb, struct solo_vb2_buf, vb);
+
+ spin_lock(&solo_dev->slock);
+ list_add_tail(&solo_vb->list, &solo_dev->vidq_active);
+ spin_unlock(&solo_dev->slock);
+ wake_up_interruptible(&solo_dev->disp_thread_wait);
+}
+
+static const struct vb2_ops solo_video_qops = {
+ .queue_setup = solo_queue_setup,
+ .buf_queue = solo_buf_queue,
+ .start_streaming = solo_start_streaming,
+ .stop_streaming = solo_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static int solo_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ strcpy(cap->driver, SOLO6X10_NAME);
+ strcpy(cap->card, "Softlogic 6x10");
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
+ pci_name(solo_dev->pdev));
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+ V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int solo_enum_ext_input(struct solo_dev *solo_dev,
+ struct v4l2_input *input)
+{
+ static const char * const dispnames_1[] = { "4UP" };
+ static const char * const dispnames_2[] = { "4UP-1", "4UP-2" };
+ static const char * const dispnames_5[] = {
+ "4UP-1", "4UP-2", "4UP-3", "4UP-4", "16UP"
+ };
+ const char * const *dispnames;
+
+ if (input->index >= (solo_dev->nr_chans + solo_dev->nr_ext))
+ return -EINVAL;
+
+ if (solo_dev->nr_ext == 5)
+ dispnames = dispnames_5;
+ else if (solo_dev->nr_ext == 2)
+ dispnames = dispnames_2;
+ else
+ dispnames = dispnames_1;
+
+ snprintf(input->name, sizeof(input->name), "Multi %s",
+ dispnames[input->index - solo_dev->nr_chans]);
+
+ return 0;
+}
+
+static int solo_enum_input(struct file *file, void *priv,
+ struct v4l2_input *input)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ if (input->index >= solo_dev->nr_chans) {
+ int ret = solo_enum_ext_input(solo_dev, input);
+ if (ret < 0)
+ return ret;
+ } else {
+ snprintf(input->name, sizeof(input->name), "Camera %d",
+ input->index + 1);
+
+ /* We can only check this for normal inputs */
+ if (!tw28_get_video_status(solo_dev, input->index))
+ input->status = V4L2_IN_ST_NO_SIGNAL;
+ }
+
+ input->type = V4L2_INPUT_TYPE_CAMERA;
+ input->std = solo_dev->vfd->tvnorms;
+ return 0;
+}
+
+static int solo_set_input(struct file *file, void *priv, unsigned int index)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+ int ret = solo_v4l2_set_ch(solo_dev, index);
+
+ if (!ret) {
+ while (erase_off(solo_dev))
+ /* Do nothing */;
+ }
+
+ return ret;
+}
+
+static int solo_get_input(struct file *file, void *priv, unsigned int *index)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ *index = solo_dev->cur_disp_ch;
+
+ return 0;
+}
+
+static int solo_enum_fmt_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index)
+ return -EINVAL;
+
+ f->pixelformat = V4L2_PIX_FMT_UYVY;
+ strlcpy(f->description, "UYUV 4:2:2 Packed", sizeof(f->description));
+
+ return 0;
+}
+
+static int solo_try_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ int image_size = solo_image_size(solo_dev);
+
+ if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
+ return -EINVAL;
+
+ pix->width = solo_dev->video_hsize;
+ pix->height = solo_vlines(solo_dev);
+ pix->sizeimage = image_size;
+ pix->field = V4L2_FIELD_INTERLACED;
+ pix->pixelformat = V4L2_PIX_FMT_UYVY;
+ pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ pix->priv = 0;
+ return 0;
+}
+
+static int solo_set_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ if (vb2_is_busy(&solo_dev->vidq))
+ return -EBUSY;
+
+ /* For right now, if it doesn't match our running config,
+ * then fail */
+ return solo_try_fmt_cap(file, priv, f);
+}
+
+static int solo_get_fmt_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ pix->width = solo_dev->video_hsize;
+ pix->height = solo_vlines(solo_dev);
+ pix->pixelformat = V4L2_PIX_FMT_UYVY;
+ pix->field = V4L2_FIELD_INTERLACED;
+ pix->sizeimage = solo_image_size(solo_dev);
+ pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ pix->bytesperline = solo_bytesperline(solo_dev);
+ pix->priv = 0;
+
+ return 0;
+}
+
+static int solo_g_std(struct file *file, void *priv, v4l2_std_id *i)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
+ *i = V4L2_STD_NTSC_M;
+ else
+ *i = V4L2_STD_PAL;
+ return 0;
+}
+
+int solo_set_video_type(struct solo_dev *solo_dev, bool type)
+{
+ int i;
+
+ /* Make sure all video nodes are idle */
+ if (vb2_is_busy(&solo_dev->vidq))
+ return -EBUSY;
+ for (i = 0; i < solo_dev->nr_chans; i++)
+ if (vb2_is_busy(&solo_dev->v4l2_enc[i]->vidq))
+ return -EBUSY;
+ solo_dev->video_type = type;
+ /* Reconfigure for the new standard */
+ solo_disp_init(solo_dev);
+ solo_enc_init(solo_dev);
+ solo_tw28_init(solo_dev);
+ for (i = 0; i < solo_dev->nr_chans; i++)
+ solo_update_mode(solo_dev->v4l2_enc[i]);
+ return solo_v4l2_set_ch(solo_dev, solo_dev->cur_disp_ch);
+}
+
+static int solo_s_std(struct file *file, void *priv, v4l2_std_id std)
+{
+ struct solo_dev *solo_dev = video_drvdata(file);
+
+ return solo_set_video_type(solo_dev, std & V4L2_STD_PAL);
+}
+
+static int solo_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct solo_dev *solo_dev =
+ container_of(ctrl->handler, struct solo_dev, disp_hdl);
+
+ switch (ctrl->id) {
+ case V4L2_CID_MOTION_TRACE:
+ if (ctrl->val) {
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER,
+ SOLO_VI_MOTION_Y_ADD |
+ SOLO_VI_MOTION_Y_VALUE(0x20) |
+ SOLO_VI_MOTION_CB_VALUE(0x10) |
+ SOLO_VI_MOTION_CR_VALUE(0x10));
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR,
+ SOLO_VI_MOTION_CR_ADD |
+ SOLO_VI_MOTION_Y_VALUE(0x10) |
+ SOLO_VI_MOTION_CB_VALUE(0x80) |
+ SOLO_VI_MOTION_CR_VALUE(0x10));
+ } else {
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
+ solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
+ }
+ return 0;
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+static const struct v4l2_file_operations solo_v4l2_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .mmap = vb2_fop_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops solo_v4l2_ioctl_ops = {
+ .vidioc_querycap = solo_querycap,
+ .vidioc_s_std = solo_s_std,
+ .vidioc_g_std = solo_g_std,
+ /* Input callbacks */
+ .vidioc_enum_input = solo_enum_input,
+ .vidioc_s_input = solo_set_input,
+ .vidioc_g_input = solo_get_input,
+ /* Video capture format callbacks */
+ .vidioc_enum_fmt_vid_cap = solo_enum_fmt_cap,
+ .vidioc_try_fmt_vid_cap = solo_try_fmt_cap,
+ .vidioc_s_fmt_vid_cap = solo_set_fmt_cap,
+ .vidioc_g_fmt_vid_cap = solo_get_fmt_cap,
+ /* Streaming I/O */
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ /* Logging and events */
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static struct video_device solo_v4l2_template = {
+ .name = SOLO6X10_NAME,
+ .fops = &solo_v4l2_fops,
+ .ioctl_ops = &solo_v4l2_ioctl_ops,
+ .minor = -1,
+ .release = video_device_release,
+ .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL,
+};
+
+static const struct v4l2_ctrl_ops solo_ctrl_ops = {
+ .s_ctrl = solo_s_ctrl,
+};
+
+static const struct v4l2_ctrl_config solo_motion_trace_ctrl = {
+ .ops = &solo_ctrl_ops,
+ .id = V4L2_CID_MOTION_TRACE,
+ .name = "Motion Detection Trace",
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .max = 1,
+ .step = 1,
+};
+
+int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
+{
+ int ret;
+ int i;
+
+ init_waitqueue_head(&solo_dev->disp_thread_wait);
+ spin_lock_init(&solo_dev->slock);
+ mutex_init(&solo_dev->lock);
+ INIT_LIST_HEAD(&solo_dev->vidq_active);
+
+ solo_dev->vfd = video_device_alloc();
+ if (!solo_dev->vfd)
+ return -ENOMEM;
+
+ *solo_dev->vfd = solo_v4l2_template;
+ solo_dev->vfd->v4l2_dev = &solo_dev->v4l2_dev;
+ solo_dev->vfd->queue = &solo_dev->vidq;
+ solo_dev->vfd->lock = &solo_dev->lock;
+ v4l2_ctrl_handler_init(&solo_dev->disp_hdl, 1);
+ v4l2_ctrl_new_custom(&solo_dev->disp_hdl, &solo_motion_trace_ctrl, NULL);
+ if (solo_dev->disp_hdl.error) {
+ ret = solo_dev->disp_hdl.error;
+ goto fail;
+ }
+ solo_dev->vfd->ctrl_handler = &solo_dev->disp_hdl;
+ set_bit(V4L2_FL_USE_FH_PRIO, &solo_dev->vfd->flags);
+
+ video_set_drvdata(solo_dev->vfd, solo_dev);
+
+ solo_dev->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ solo_dev->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
+ solo_dev->vidq.ops = &solo_video_qops;
+ solo_dev->vidq.mem_ops = &vb2_dma_contig_memops;
+ solo_dev->vidq.drv_priv = solo_dev;
+ solo_dev->vidq.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ solo_dev->vidq.gfp_flags = __GFP_DMA32;
+ solo_dev->vidq.buf_struct_size = sizeof(struct solo_vb2_buf);
+ solo_dev->vidq.lock = &solo_dev->lock;
+ ret = vb2_queue_init(&solo_dev->vidq);
+ if (ret < 0)
+ goto fail;
+
+ solo_dev->alloc_ctx = vb2_dma_contig_init_ctx(&solo_dev->pdev->dev);
+ if (IS_ERR(solo_dev->alloc_ctx)) {
+ dev_err(&solo_dev->pdev->dev, "Can't allocate buffer context");
+ return PTR_ERR(solo_dev->alloc_ctx);
+ }
+
+ /* Cycle all the channels and clear */
+ for (i = 0; i < solo_dev->nr_chans; i++) {
+ solo_v4l2_set_ch(solo_dev, i);
+ while (erase_off(solo_dev))
+ /* Do nothing */;
+ }
+
+ /* Set the default display channel */
+ solo_v4l2_set_ch(solo_dev, 0);
+ while (erase_off(solo_dev))
+ /* Do nothing */;
+
+ ret = video_register_device(solo_dev->vfd, VFL_TYPE_GRABBER, nr);
+ if (ret < 0)
+ goto fail;
+
+ snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)",
+ SOLO6X10_NAME, solo_dev->vfd->num);
+
+ dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with "
+ "%d inputs (%d extended)\n", solo_dev->vfd->num,
+ solo_dev->nr_chans, solo_dev->nr_ext);
+
+ return 0;
+
+fail:
+ video_device_release(solo_dev->vfd);
+ vb2_dma_contig_cleanup_ctx(solo_dev->alloc_ctx);
+ v4l2_ctrl_handler_free(&solo_dev->disp_hdl);
+ solo_dev->vfd = NULL;
+ return ret;
+}
+
+void solo_v4l2_exit(struct solo_dev *solo_dev)
+{
+ if (solo_dev->vfd == NULL)
+ return;
+
+ video_unregister_device(solo_dev->vfd);
+ vb2_dma_contig_cleanup_ctx(solo_dev->alloc_ctx);
+ v4l2_ctrl_handler_free(&solo_dev->disp_hdl);
+ solo_dev->vfd = NULL;
+}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "solo6x10.h"
-#include "solo6x10-tw28.h"
-
-#define DEFAULT_HDELAY_NTSC (32 - 8)
-#define DEFAULT_HACTIVE_NTSC (720 + 16)
-#define DEFAULT_VDELAY_NTSC (7 - 2)
-#define DEFAULT_VACTIVE_NTSC (240 + 4)
-
-#define DEFAULT_HDELAY_PAL (32 + 4)
-#define DEFAULT_HACTIVE_PAL (864-DEFAULT_HDELAY_PAL)
-#define DEFAULT_VDELAY_PAL (6)
-#define DEFAULT_VACTIVE_PAL (312-DEFAULT_VDELAY_PAL)
-
-
-static const u8 tbl_tw2864_ntsc_template[] = {
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */
- 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */
- 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */
- 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x30 */
- 0x12, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00,
- 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
- 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00,
- 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */
- 0x00, 0x28, 0x44, 0x44, 0xa0, 0x88, 0x5a, 0x01,
- 0x08, 0x08, 0x08, 0x08, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */
- 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44,
- 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
- 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00,
- 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */
- 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81,
- 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
- 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
- 0x83, 0xb5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */
- 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00,
-};
-
-static const u8 tbl_tw2864_pal_template[] = {
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */
- 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */
- 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */
- 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */
- 0x18, 0xf5, 0x0c, 0xd0, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x40 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x70 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA3, 0x00,
- 0x00, 0x02, 0x00, 0xcc, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
- 0x22, 0x01, 0xd8, 0xbc, 0xb8, 0x44, 0x38, 0x00,
- 0x00, 0x78, 0x72, 0x3e, 0x14, 0xa5, 0xe4, 0x05, /* 0x90 */
- 0x00, 0x28, 0x44, 0x44, 0xa0, 0x90, 0x5a, 0x01,
- 0x0a, 0x0a, 0x0a, 0x0a, 0x1a, 0x1a, 0x1a, 0x1a, /* 0xa0 */
- 0x00, 0x00, 0x00, 0xf0, 0xf0, 0xf0, 0xf0, 0x44,
- 0x44, 0x0a, 0x00, 0xff, 0xef, 0xef, 0xef, 0xef, /* 0xb0 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
- 0x00, 0x00, 0x55, 0x00, 0xb1, 0xe4, 0x40, 0x00,
- 0x77, 0x77, 0x01, 0x13, 0x57, 0x9b, 0xdf, 0x20, /* 0xd0 */
- 0x64, 0xa8, 0xec, 0xc1, 0x0f, 0x11, 0x11, 0x81,
- 0x00, 0xe0, 0xbb, 0xbb, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
- 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
- 0x83, 0xb5, 0x09, 0x00, 0xa0, 0x00, 0x01, 0x20, /* 0xf0 */
- 0x64, 0x11, 0x40, 0xaf, 0xff, 0x00, 0x00, 0x00,
-};
-
-static const u8 tbl_tw2865_ntsc_template[] = {
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x00 */
- 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x10 */
- 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x02, /* 0x20 */
- 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0xf0, 0x70, 0x48, 0x80, 0x80, 0x00, 0x02, /* 0x30 */
- 0x12, 0xff, 0x09, 0xd0, 0x00, 0x00, 0x00, 0x7f,
- 0x00, 0x00, 0x90, 0x68, 0x00, 0x38, 0x80, 0x80, /* 0x40 */
- 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
- 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */
- 0xE9, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
- 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
- 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
- 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */
- 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
- 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1B, 0x1A, /* 0xa0 */
- 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
- 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */
- 0xFF, 0xE7, 0xE9, 0xE9, 0xEB, 0xFF, 0xD6, 0xD8,
- 0xD8, 0xD7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
- 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
- 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */
- 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
- 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
- 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
- 0x83, 0xB5, 0x09, 0x78, 0x85, 0x00, 0x01, 0x20, /* 0xf0 */
- 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
-};
-
-static const u8 tbl_tw2865_pal_template[] = {
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x00 */
- 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x10 */
- 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x20 */
- 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0xf0, 0x70, 0x30, 0x80, 0x80, 0x00, 0x12, /* 0x30 */
- 0x11, 0xff, 0x01, 0xc3, 0x00, 0x00, 0x01, 0x7f,
- 0x00, 0x94, 0x90, 0x48, 0x00, 0x38, 0x7F, 0x80, /* 0x40 */
- 0x80, 0x80, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x50 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x45, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0x60 */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x43,
- 0x08, 0x00, 0x00, 0x01, 0xf1, 0x03, 0xEF, 0x03, /* 0x70 */
- 0xEA, 0x03, 0xD9, 0x15, 0x15, 0xE4, 0xA3, 0x80,
- 0x00, 0x02, 0x00, 0xCC, 0x00, 0x80, 0x44, 0x50, /* 0x80 */
- 0x22, 0x01, 0xD8, 0xBC, 0xB8, 0x44, 0x38, 0x00,
- 0x00, 0x78, 0x44, 0x3D, 0x14, 0xA5, 0xE0, 0x05, /* 0x90 */
- 0x00, 0x28, 0x44, 0x44, 0xA0, 0x90, 0x52, 0x13,
- 0x08, 0x08, 0x08, 0x08, 0x1A, 0x1A, 0x1A, 0x1A, /* 0xa0 */
- 0x00, 0x00, 0x00, 0xF0, 0xF0, 0xF0, 0xF0, 0x44,
- 0x44, 0x4A, 0x00, 0xFF, 0xEF, 0xEF, 0xEF, 0xEF, /* 0xb0 */
- 0xFF, 0xE7, 0xE9, 0xE9, 0xE9, 0xFF, 0xD7, 0xD8,
- 0xD9, 0xD8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 0xc0 */
- 0x00, 0x00, 0x55, 0x00, 0xE4, 0x39, 0x00, 0x80,
- 0x77, 0x77, 0x03, 0x20, 0x57, 0x9b, 0xdf, 0x31, /* 0xd0 */
- 0x64, 0xa8, 0xec, 0xd1, 0x0f, 0x11, 0x11, 0x81,
- 0x10, 0xC0, 0xAA, 0xAA, 0x00, 0x11, 0x00, 0x00, /* 0xe0 */
- 0x11, 0x00, 0x00, 0x11, 0x00, 0x00, 0x11, 0x00,
- 0x83, 0xB5, 0x09, 0x00, 0xA0, 0x00, 0x01, 0x20, /* 0xf0 */
- 0x64, 0x51, 0x40, 0xaf, 0xFF, 0xF0, 0x00, 0xC0,
-};
-
-#define is_tw286x(__solo, __id) (!(__solo->tw2815 & (1 << __id)))
-
-static u8 tw_readbyte(struct solo_dev *solo_dev, int chip_id, u8 tw6x_off,
- u8 tw_off)
-{
- if (is_tw286x(solo_dev, chip_id))
- return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_id),
- tw6x_off);
- else
- return solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_id),
- tw_off);
-}
-
-static void tw_writebyte(struct solo_dev *solo_dev, int chip_id,
- u8 tw6x_off, u8 tw_off, u8 val)
-{
- if (is_tw286x(solo_dev, chip_id))
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_id),
- tw6x_off, val);
- else
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_id),
- tw_off, val);
-}
-
-static void tw_write_and_verify(struct solo_dev *solo_dev, u8 addr, u8 off,
- u8 val)
-{
- int i;
-
- for (i = 0; i < 5; i++) {
- u8 rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW, addr, off);
- if (rval == val)
- return;
-
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, addr, off, val);
- msleep_interruptible(1);
- }
-
-/* printk("solo6x10/tw28: Error writing register: %02x->%02x [%02x]\n", */
-/* addr, off, val); */
-}
-
-static int tw2865_setup(struct solo_dev *solo_dev, u8 dev_addr)
-{
- u8 tbl_tw2865_common[256];
- int i;
-
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL)
- memcpy(tbl_tw2865_common, tbl_tw2865_pal_template,
- sizeof(tbl_tw2865_common));
- else
- memcpy(tbl_tw2865_common, tbl_tw2865_ntsc_template,
- sizeof(tbl_tw2865_common));
-
- /* ALINK Mode */
- if (solo_dev->nr_chans == 4) {
- tbl_tw2865_common[0xd2] = 0x01;
- tbl_tw2865_common[0xcf] = 0x00;
- } else if (solo_dev->nr_chans == 8) {
- tbl_tw2865_common[0xd2] = 0x02;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2865_common[0xcf] = 0x80;
- } else if (solo_dev->nr_chans == 16) {
- tbl_tw2865_common[0xd2] = 0x03;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2865_common[0xcf] = 0x83;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
- tbl_tw2865_common[0xcf] = 0x83;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
- tbl_tw2865_common[0xcf] = 0x80;
- }
-
- for (i = 0; i < 0xff; i++) {
- /* Skip read only registers */
- switch (i) {
- case 0xb8 ... 0xc1:
- case 0xc4 ... 0xc7:
- case 0xfd:
- continue;
- }
- switch (i & ~0x30) {
- case 0x00:
- case 0x0c ... 0x0d:
- continue;
- }
-
- tw_write_and_verify(solo_dev, dev_addr, i,
- tbl_tw2865_common[i]);
- }
-
- return 0;
-}
-
-static int tw2864_setup(struct solo_dev *solo_dev, u8 dev_addr)
-{
- u8 tbl_tw2864_common[256];
- int i;
-
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_PAL)
- memcpy(tbl_tw2864_common, tbl_tw2864_pal_template,
- sizeof(tbl_tw2864_common));
- else
- memcpy(tbl_tw2864_common, tbl_tw2864_ntsc_template,
- sizeof(tbl_tw2864_common));
-
- if (solo_dev->tw2865 == 0) {
- /* IRQ Mode */
- if (solo_dev->nr_chans == 4) {
- tbl_tw2864_common[0xd2] = 0x01;
- tbl_tw2864_common[0xcf] = 0x00;
- } else if (solo_dev->nr_chans == 8) {
- tbl_tw2864_common[0xd2] = 0x02;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
- tbl_tw2864_common[0xcf] = 0x43;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2864_common[0xcf] = 0x40;
- } else if (solo_dev->nr_chans == 16) {
- tbl_tw2864_common[0xd2] = 0x03;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
- tbl_tw2864_common[0xcf] = 0x43;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2864_common[0xcf] = 0x43;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
- tbl_tw2864_common[0xcf] = 0x43;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
- tbl_tw2864_common[0xcf] = 0x40;
- }
- } else {
- /* ALINK Mode. Assumes that the first tw28xx is a
- * 2865 and these are in cascade. */
- for (i = 0; i <= 4; i++)
- tbl_tw2864_common[0x08 | i << 4] = 0x12;
-
- if (solo_dev->nr_chans == 8) {
- tbl_tw2864_common[0xd2] = 0x02;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2864_common[0xcf] = 0x80;
- } else if (solo_dev->nr_chans == 16) {
- tbl_tw2864_common[0xd2] = 0x03;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2864_common[0xcf] = 0x83;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
- tbl_tw2864_common[0xcf] = 0x83;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
- tbl_tw2864_common[0xcf] = 0x80;
- }
- }
-
- for (i = 0; i < 0xff; i++) {
- /* Skip read only registers */
- switch (i) {
- case 0xb8 ... 0xc1:
- case 0xfd:
- continue;
- }
- switch (i & ~0x30) {
- case 0x00:
- case 0x0c:
- case 0x0d:
- continue;
- }
-
- tw_write_and_verify(solo_dev, dev_addr, i,
- tbl_tw2864_common[i]);
- }
-
- return 0;
-}
-
-static int tw2815_setup(struct solo_dev *solo_dev, u8 dev_addr)
-{
- u8 tbl_ntsc_tw2815_common[] = {
- 0x00, 0xc8, 0x20, 0xd0, 0x06, 0xf0, 0x08, 0x80,
- 0x80, 0x80, 0x80, 0x02, 0x06, 0x00, 0x11,
- };
-
- u8 tbl_pal_tw2815_common[] = {
- 0x00, 0x88, 0x20, 0xd0, 0x05, 0x20, 0x28, 0x80,
- 0x80, 0x80, 0x80, 0x82, 0x06, 0x00, 0x11,
- };
-
- u8 tbl_tw2815_sfr[] = {
- 0x00, 0x00, 0x00, 0xc0, 0x45, 0xa0, 0xd0, 0x2f, /* 0x00 */
- 0x64, 0x80, 0x80, 0x82, 0x82, 0x00, 0x00, 0x00,
- 0x00, 0x0f, 0x05, 0x00, 0x00, 0x80, 0x06, 0x00, /* 0x10 */
- 0x00, 0x00, 0x00, 0xff, 0x8f, 0x00, 0x00, 0x00,
- 0x88, 0x88, 0xc0, 0x00, 0x20, 0x64, 0xa8, 0xec, /* 0x20 */
- 0x31, 0x75, 0xb9, 0xfd, 0x00, 0x00, 0x88, 0x88,
- 0x88, 0x11, 0x00, 0x88, 0x88, 0x00, /* 0x30 */
- };
- u8 *tbl_tw2815_common;
- int i;
- int ch;
-
- tbl_ntsc_tw2815_common[0x06] = 0;
-
- /* Horizontal Delay Control */
- tbl_ntsc_tw2815_common[0x02] = DEFAULT_HDELAY_NTSC & 0xff;
- tbl_ntsc_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_NTSC >> 8);
-
- /* Horizontal Active Control */
- tbl_ntsc_tw2815_common[0x03] = DEFAULT_HACTIVE_NTSC & 0xff;
- tbl_ntsc_tw2815_common[0x06] |=
- ((0x03 & (DEFAULT_HACTIVE_NTSC >> 8)) << 2);
-
- /* Vertical Delay Control */
- tbl_ntsc_tw2815_common[0x04] = DEFAULT_VDELAY_NTSC & 0xff;
- tbl_ntsc_tw2815_common[0x06] |=
- ((0x01 & (DEFAULT_VDELAY_NTSC >> 8)) << 4);
-
- /* Vertical Active Control */
- tbl_ntsc_tw2815_common[0x05] = DEFAULT_VACTIVE_NTSC & 0xff;
- tbl_ntsc_tw2815_common[0x06] |=
- ((0x01 & (DEFAULT_VACTIVE_NTSC >> 8)) << 5);
-
- tbl_pal_tw2815_common[0x06] = 0;
-
- /* Horizontal Delay Control */
- tbl_pal_tw2815_common[0x02] = DEFAULT_HDELAY_PAL & 0xff;
- tbl_pal_tw2815_common[0x06] |= 0x03 & (DEFAULT_HDELAY_PAL >> 8);
-
- /* Horizontal Active Control */
- tbl_pal_tw2815_common[0x03] = DEFAULT_HACTIVE_PAL & 0xff;
- tbl_pal_tw2815_common[0x06] |=
- ((0x03 & (DEFAULT_HACTIVE_PAL >> 8)) << 2);
-
- /* Vertical Delay Control */
- tbl_pal_tw2815_common[0x04] = DEFAULT_VDELAY_PAL & 0xff;
- tbl_pal_tw2815_common[0x06] |=
- ((0x01 & (DEFAULT_VDELAY_PAL >> 8)) << 4);
-
- /* Vertical Active Control */
- tbl_pal_tw2815_common[0x05] = DEFAULT_VACTIVE_PAL & 0xff;
- tbl_pal_tw2815_common[0x06] |=
- ((0x01 & (DEFAULT_VACTIVE_PAL >> 8)) << 5);
-
- tbl_tw2815_common =
- (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) ?
- tbl_ntsc_tw2815_common : tbl_pal_tw2815_common;
-
- /* Dual ITU-R BT.656 format */
- tbl_tw2815_common[0x0d] |= 0x04;
-
- /* Audio configuration */
- tbl_tw2815_sfr[0x62 - 0x40] &= ~(3 << 6);
-
- if (solo_dev->nr_chans == 4) {
- tbl_tw2815_sfr[0x63 - 0x40] |= 1;
- tbl_tw2815_sfr[0x62 - 0x40] |= 3 << 6;
- } else if (solo_dev->nr_chans == 8) {
- tbl_tw2815_sfr[0x63 - 0x40] |= 2;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
- tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
- } else if (solo_dev->nr_chans == 16) {
- tbl_tw2815_sfr[0x63 - 0x40] |= 3;
- if (dev_addr == TW_CHIP_OFFSET_ADDR(0))
- tbl_tw2815_sfr[0x62 - 0x40] |= 1 << 6;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(1))
- tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(2))
- tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 6;
- else if (dev_addr == TW_CHIP_OFFSET_ADDR(3))
- tbl_tw2815_sfr[0x62 - 0x40] |= 2 << 6;
- }
-
- /* Output mode of R_ADATM pin (0 mixing, 1 record) */
- /* tbl_tw2815_sfr[0x63 - 0x40] |= 0 << 2; */
-
- /* 8KHz, used to be 16KHz, but changed for remote client compat */
- tbl_tw2815_sfr[0x62 - 0x40] |= 0 << 2;
- tbl_tw2815_sfr[0x6c - 0x40] |= 0 << 2;
-
- /* Playback of right channel */
- tbl_tw2815_sfr[0x6c - 0x40] |= 1 << 5;
-
- /* Reserved value (XXX ??) */
- tbl_tw2815_sfr[0x5c - 0x40] |= 1 << 5;
-
- /* Analog output gain and mix ratio playback on full */
- tbl_tw2815_sfr[0x70 - 0x40] |= 0xff;
- /* Select playback audio and mute all except */
- tbl_tw2815_sfr[0x71 - 0x40] |= 0x10;
- tbl_tw2815_sfr[0x6d - 0x40] |= 0x0f;
-
- /* End of audio configuration */
-
- for (ch = 0; ch < 4; ch++) {
- tbl_tw2815_common[0x0d] &= ~3;
- switch (ch) {
- case 0:
- tbl_tw2815_common[0x0d] |= 0x21;
- break;
- case 1:
- tbl_tw2815_common[0x0d] |= 0x20;
- break;
- case 2:
- tbl_tw2815_common[0x0d] |= 0x23;
- break;
- case 3:
- tbl_tw2815_common[0x0d] |= 0x22;
- break;
- }
-
- for (i = 0; i < 0x0f; i++) {
- if (i == 0x00)
- continue; /* read-only */
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
- dev_addr, (ch * 0x10) + i,
- tbl_tw2815_common[i]);
- }
- }
-
- for (i = 0x40; i < 0x76; i++) {
- /* Skip read-only and nop registers */
- if (i == 0x40 || i == 0x59 || i == 0x5a ||
- i == 0x5d || i == 0x5e || i == 0x5f)
- continue;
-
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW, dev_addr, i,
- tbl_tw2815_sfr[i - 0x40]);
- }
-
- return 0;
-}
-
-#define FIRST_ACTIVE_LINE 0x0008
-#define LAST_ACTIVE_LINE 0x0102
-
-static void saa7128_setup(struct solo_dev *solo_dev)
-{
- int i;
- unsigned char regs[128] = {
- 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x04, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x1C, 0x2B, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00,
- 0x59, 0x1d, 0x75, 0x3f, 0x06, 0x3f, 0x00, 0x00,
- 0x1c, 0x33, 0x00, 0x3f, 0x00, 0x00, 0x3f, 0x00,
- 0x1a, 0x1a, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x68, 0x10, 0x97, 0x4c, 0x18,
- 0x9b, 0x93, 0x9f, 0xff, 0x7c, 0x34, 0x3f, 0x3f,
- 0x3f, 0x83, 0x83, 0x80, 0x0d, 0x0f, 0xc3, 0x06,
- 0x02, 0x80, 0x71, 0x77, 0xa7, 0x67, 0x66, 0x2e,
- 0x7b, 0x11, 0x4f, 0x1f, 0x7c, 0xf0, 0x21, 0x77,
- 0x41, 0x88, 0x41, 0x12, 0xed, 0x10, 0x10, 0x00,
- 0x41, 0xc3, 0x00, 0x3e, 0xb8, 0x02, 0x00, 0x00,
- 0x00, 0x00, 0x08, 0xff, 0x80, 0x00, 0xff, 0xff,
- };
-
- regs[0x7A] = FIRST_ACTIVE_LINE & 0xff;
- regs[0x7B] = LAST_ACTIVE_LINE & 0xff;
- regs[0x7C] = ((1 << 7) |
- (((LAST_ACTIVE_LINE >> 8) & 1) << 6) |
- (((FIRST_ACTIVE_LINE >> 8) & 1) << 4));
-
- /* PAL: XXX: We could do a second set of regs to avoid this */
- if (solo_dev->video_type != SOLO_VO_FMT_TYPE_NTSC) {
- regs[0x28] = 0xE1;
-
- regs[0x5A] = 0x0F;
- regs[0x61] = 0x02;
- regs[0x62] = 0x35;
- regs[0x63] = 0xCB;
- regs[0x64] = 0x8A;
- regs[0x65] = 0x09;
- regs[0x66] = 0x2A;
-
- regs[0x6C] = 0xf1;
- regs[0x6E] = 0x20;
-
- regs[0x7A] = 0x06 + 12;
- regs[0x7b] = 0x24 + 12;
- regs[0x7c] |= 1 << 6;
- }
-
- /* First 0x25 bytes are read-only? */
- for (i = 0x26; i < 128; i++) {
- if (i == 0x60 || i == 0x7D)
- continue;
- solo_i2c_writebyte(solo_dev, SOLO_I2C_SAA, 0x46, i, regs[i]);
- }
-
- return;
-}
-
-int solo_tw28_init(struct solo_dev *solo_dev)
-{
- int i;
- u8 value;
-
- solo_dev->tw28_cnt = 0;
-
- /* Detect techwell chip type(s) */
- for (i = 0; i < solo_dev->nr_chans / 4; i++) {
- value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(i), 0xFF);
-
- switch (value >> 3) {
- case 0x18:
- solo_dev->tw2865 |= 1 << i;
- solo_dev->tw28_cnt++;
- break;
- case 0x0c:
- solo_dev->tw2864 |= 1 << i;
- solo_dev->tw28_cnt++;
- break;
- default:
- value = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(i),
- 0x59);
- if ((value >> 3) == 0x04) {
- solo_dev->tw2815 |= 1 << i;
- solo_dev->tw28_cnt++;
- }
- }
- }
-
- if (solo_dev->tw28_cnt != (solo_dev->nr_chans >> 2)) {
- dev_err(&solo_dev->pdev->dev,
- "Could not initialize any techwell chips\n");
- return -EINVAL;
- }
-
- saa7128_setup(solo_dev);
-
- for (i = 0; i < solo_dev->tw28_cnt; i++) {
- if ((solo_dev->tw2865 & (1 << i)))
- tw2865_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
- else if ((solo_dev->tw2864 & (1 << i)))
- tw2864_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
- else
- tw2815_setup(solo_dev, TW_CHIP_OFFSET_ADDR(i));
- }
-
- return 0;
-}
-
-/*
- * We accessed the video status signal in the Techwell chip through
- * iic/i2c because the video status reported by register REG_VI_STATUS1
- * (address 0x012C) of the SOLO6010 chip doesn't give the correct video
- * status signal values.
- */
-int tw28_get_video_status(struct solo_dev *solo_dev, u8 ch)
-{
- u8 val, chip_num;
-
- /* Get the right chip and on-chip channel */
- chip_num = ch / 4;
- ch %= 4;
-
- val = tw_readbyte(solo_dev, chip_num, TW286x_AV_STAT_ADDR,
- TW_AV_STAT_ADDR) & 0x0f;
-
- return val & (1 << ch) ? 1 : 0;
-}
-
-#if 0
-/* Status of audio from up to 4 techwell chips are combined into 1 variable.
- * See techwell datasheet for details. */
-u16 tw28_get_audio_status(struct solo_dev *solo_dev)
-{
- u8 val;
- u16 status = 0;
- int i;
-
- for (i = 0; i < solo_dev->tw28_cnt; i++) {
- val = (tw_readbyte(solo_dev, i, TW286x_AV_STAT_ADDR,
- TW_AV_STAT_ADDR) & 0xf0) >> 4;
- status |= val << (i * 4);
- }
-
- return status;
-}
-#endif
-
-bool tw28_has_sharpness(struct solo_dev *solo_dev, u8 ch)
-{
- return is_tw286x(solo_dev, ch / 4);
-}
-
-int tw28_set_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch,
- s32 val)
-{
- char sval;
- u8 chip_num;
-
- /* Get the right chip and on-chip channel */
- chip_num = ch / 4;
- ch %= 4;
-
- if (val > 255 || val < 0)
- return -ERANGE;
-
- switch (ctrl) {
- case V4L2_CID_SHARPNESS:
- /* Only 286x has sharpness */
- if (is_tw286x(solo_dev, chip_num)) {
- u8 v = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_num),
- TW286x_SHARPNESS(chip_num));
- v &= 0xf0;
- v |= val;
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_num),
- TW286x_SHARPNESS(chip_num), v);
- } else {
- return -EINVAL;
- }
- break;
-
- case V4L2_CID_HUE:
- if (is_tw286x(solo_dev, chip_num))
- sval = val - 128;
- else
- sval = (char)val;
- tw_writebyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
- TW_HUE_ADDR(ch), sval);
-
- break;
-
- case V4L2_CID_SATURATION:
- /* 286x chips have a U and V component for saturation */
- if (is_tw286x(solo_dev, chip_num)) {
- solo_i2c_writebyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_num),
- TW286x_SATURATIONU_ADDR(ch), val);
- }
- tw_writebyte(solo_dev, chip_num, TW286x_SATURATIONV_ADDR(ch),
- TW_SATURATION_ADDR(ch), val);
-
- break;
-
- case V4L2_CID_CONTRAST:
- tw_writebyte(solo_dev, chip_num, TW286x_CONTRAST_ADDR(ch),
- TW_CONTRAST_ADDR(ch), val);
- break;
-
- case V4L2_CID_BRIGHTNESS:
- if (is_tw286x(solo_dev, chip_num))
- sval = val - 128;
- else
- sval = (char)val;
- tw_writebyte(solo_dev, chip_num, TW286x_BRIGHTNESS_ADDR(ch),
- TW_BRIGHTNESS_ADDR(ch), sval);
-
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-int tw28_get_ctrl_val(struct solo_dev *solo_dev, u32 ctrl, u8 ch,
- s32 *val)
-{
- u8 rval, chip_num;
-
- /* Get the right chip and on-chip channel */
- chip_num = ch / 4;
- ch %= 4;
-
- switch (ctrl) {
- case V4L2_CID_SHARPNESS:
- /* Only 286x has sharpness */
- if (is_tw286x(solo_dev, chip_num)) {
- rval = solo_i2c_readbyte(solo_dev, SOLO_I2C_TW,
- TW_CHIP_OFFSET_ADDR(chip_num),
- TW286x_SHARPNESS(chip_num));
- *val = rval & 0x0f;
- } else
- *val = 0;
- break;
- case V4L2_CID_HUE:
- rval = tw_readbyte(solo_dev, chip_num, TW286x_HUE_ADDR(ch),
- TW_HUE_ADDR(ch));
- if (is_tw286x(solo_dev, chip_num))
- *val = (s32)((char)rval) + 128;
- else
- *val = rval;
- break;
- case V4L2_CID_SATURATION:
- *val = tw_readbyte(solo_dev, chip_num,
- TW286x_SATURATIONU_ADDR(ch),
- TW_SATURATION_ADDR(ch));
- break;
- case V4L2_CID_CONTRAST:
- *val = tw_readbyte(solo_dev, chip_num,
- TW286x_CONTRAST_ADDR(ch),
- TW_CONTRAST_ADDR(ch));
- break;
- case V4L2_CID_BRIGHTNESS:
- rval = tw_readbyte(solo_dev, chip_num,
- TW286x_BRIGHTNESS_ADDR(ch),
- TW_BRIGHTNESS_ADDR(ch));
- if (is_tw286x(solo_dev, chip_num))
- *val = (s32)((char)rval) + 128;
- else
- *val = rval;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-#if 0
-/*
- * For audio output volume, the output channel is only 1. In this case we
- * don't need to offset TW_CHIP_OFFSET_ADDR. The TW_CHIP_OFFSET_ADDR used
- * is the base address of the techwell chip.
- */
-void tw2815_Set_AudioOutVol(struct solo_dev *solo_dev, unsigned int u_val)
-{
- unsigned int val;
- unsigned int chip_num;
-
- chip_num = (solo_dev->nr_chans - 1) / 4;
-
- val = tw_readbyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
- TW_AUDIO_OUTPUT_VOL_ADDR);
-
- u_val = (val & 0x0f) | (u_val << 4);
-
- tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_OUTPUT_VOL_ADDR,
- TW_AUDIO_OUTPUT_VOL_ADDR, u_val);
-}
-#endif
-
-u8 tw28_get_audio_gain(struct solo_dev *solo_dev, u8 ch)
-{
- u8 val;
- u8 chip_num;
-
- /* Get the right chip and on-chip channel */
- chip_num = ch / 4;
- ch %= 4;
-
- val = tw_readbyte(solo_dev, chip_num,
- TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
- TW_AUDIO_INPUT_GAIN_ADDR(ch));
-
- return (ch % 2) ? (val >> 4) : (val & 0x0f);
-}
-
-void tw28_set_audio_gain(struct solo_dev *solo_dev, u8 ch, u8 val)
-{
- u8 old_val;
- u8 chip_num;
-
- /* Get the right chip and on-chip channel */
- chip_num = ch / 4;
- ch %= 4;
-
- old_val = tw_readbyte(solo_dev, chip_num,
- TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
- TW_AUDIO_INPUT_GAIN_ADDR(ch));
-
- val = (old_val & ((ch % 2) ? 0x0f : 0xf0)) |
- ((ch % 2) ? (val << 4) : val);
-
- tw_writebyte(solo_dev, chip_num, TW286x_AUDIO_INPUT_GAIN_ADDR(ch),
- TW_AUDIO_INPUT_GAIN_ADDR(ch), val);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/videobuf2-dma-sg.h>
-
-#include "solo6x10.h"
-#include "solo6x10-tw28.h"
-#include "solo6x10-jpeg.h"
-
-#define MIN_VID_BUFFERS 2
-#define FRAME_BUF_SIZE (196 * 1024)
-#define MP4_QS 16
-#define DMA_ALIGN 4096
-
-/* 6010 M4V */
-static unsigned char vop_6010_ntsc_d1[] = {
- 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
- 0x02, 0x48, 0x1d, 0xc0, 0x00, 0x40, 0x00, 0x40,
- 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
- 0x1f, 0x4c, 0x58, 0x10, 0xf0, 0x71, 0x18, 0x3f,
-};
-
-static unsigned char vop_6010_ntsc_cif[] = {
- 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
- 0x02, 0x48, 0x1d, 0xc0, 0x00, 0x40, 0x00, 0x40,
- 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
- 0x1f, 0x4c, 0x2c, 0x10, 0x78, 0x51, 0x18, 0x3f,
-};
-
-static unsigned char vop_6010_pal_d1[] = {
- 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
- 0x02, 0x48, 0x15, 0xc0, 0x00, 0x40, 0x00, 0x40,
- 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
- 0x1f, 0x4c, 0x58, 0x11, 0x20, 0x71, 0x18, 0x3f,
-};
-
-static unsigned char vop_6010_pal_cif[] = {
- 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x20,
- 0x02, 0x48, 0x15, 0xc0, 0x00, 0x40, 0x00, 0x40,
- 0x00, 0x40, 0x00, 0x80, 0x00, 0x97, 0x53, 0x04,
- 0x1f, 0x4c, 0x2c, 0x10, 0x90, 0x51, 0x18, 0x3f,
-};
-
-/* 6110 h.264 */
-static unsigned char vop_6110_ntsc_d1[] = {
- 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
- 0x9a, 0x74, 0x05, 0x81, 0xec, 0x80, 0x00, 0x00,
- 0x00, 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00,
-};
-
-static unsigned char vop_6110_ntsc_cif[] = {
- 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
- 0x9a, 0x74, 0x0b, 0x0f, 0xc8, 0x00, 0x00, 0x00,
- 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00, 0x00,
-};
-
-static unsigned char vop_6110_pal_d1[] = {
- 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
- 0x9a, 0x74, 0x05, 0x80, 0x93, 0x20, 0x00, 0x00,
- 0x00, 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00,
-};
-
-static unsigned char vop_6110_pal_cif[] = {
- 0x00, 0x00, 0x00, 0x01, 0x67, 0x42, 0x00, 0x1e,
- 0x9a, 0x74, 0x0b, 0x04, 0xb2, 0x00, 0x00, 0x00,
- 0x01, 0x68, 0xce, 0x32, 0x28, 0x00, 0x00, 0x00,
-};
-
-struct vop_header {
- /* VE_STATUS0 */
- u32 mpeg_size:20, sad_motion_flag:1, video_motion_flag:1, vop_type:2,
- channel:5, source_fl:1, interlace:1, progressive:1;
-
- /* VE_STATUS1 */
- u32 vsize:8, hsize:8, last_queue:4, nop0:8, scale:4;
-
- /* VE_STATUS2 */
- u32 mpeg_off;
-
- /* VE_STATUS3 */
- u32 jpeg_off;
-
- /* VE_STATUS4 */
- u32 jpeg_size:20, interval:10, nop1:2;
-
- /* VE_STATUS5/6 */
- u32 sec, usec;
-
- /* VE_STATUS7/8/9 */
- u32 nop2[3];
-
- /* VE_STATUS10 */
- u32 mpeg_size_alt:20, nop3:12;
-
- u32 end_nops[5];
-} __packed;
-
-struct solo_enc_buf {
- enum solo_enc_types type;
- struct vop_header *vh;
- int motion;
-};
-
-static int solo_is_motion_on(struct solo_enc_dev *solo_enc)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- return (solo_dev->motion_mask >> solo_enc->ch) & 1;
-}
-
-static int solo_motion_detected(struct solo_enc_dev *solo_enc)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- unsigned long flags;
- u32 ch_mask = 1 << solo_enc->ch;
- int ret = 0;
-
- spin_lock_irqsave(&solo_enc->motion_lock, flags);
- if (solo_reg_read(solo_dev, SOLO_VI_MOT_STATUS) & ch_mask) {
- solo_reg_write(solo_dev, SOLO_VI_MOT_CLEAR, ch_mask);
- ret = 1;
- }
- spin_unlock_irqrestore(&solo_enc->motion_lock, flags);
-
- return ret;
-}
-
-static void solo_motion_toggle(struct solo_enc_dev *solo_enc, int on)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- u32 mask = 1 << solo_enc->ch;
- unsigned long flags;
-
- spin_lock_irqsave(&solo_enc->motion_lock, flags);
-
- if (on)
- solo_dev->motion_mask |= mask;
- else
- solo_dev->motion_mask &= ~mask;
-
- solo_reg_write(solo_dev, SOLO_VI_MOT_CLEAR, mask);
-
- solo_reg_write(solo_dev, SOLO_VI_MOT_ADR,
- SOLO_VI_MOTION_EN(solo_dev->motion_mask) |
- (SOLO_MOTION_EXT_ADDR(solo_dev) >> 16));
-
- spin_unlock_irqrestore(&solo_enc->motion_lock, flags);
-}
-
-void solo_update_mode(struct solo_enc_dev *solo_enc)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- int vop_len;
- unsigned char *vop;
-
- solo_enc->interlaced = (solo_enc->mode & 0x08) ? 1 : 0;
- solo_enc->bw_weight = max(solo_dev->fps / solo_enc->interval, 1);
-
- if (solo_enc->mode == SOLO_ENC_MODE_CIF) {
- solo_enc->width = solo_dev->video_hsize >> 1;
- solo_enc->height = solo_dev->video_vsize;
- if (solo_dev->type == SOLO_DEV_6110) {
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- vop = vop_6110_ntsc_cif;
- vop_len = sizeof(vop_6110_ntsc_cif);
- } else {
- vop = vop_6110_pal_cif;
- vop_len = sizeof(vop_6110_pal_cif);
- }
- } else {
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- vop = vop_6010_ntsc_cif;
- vop_len = sizeof(vop_6010_ntsc_cif);
- } else {
- vop = vop_6010_pal_cif;
- vop_len = sizeof(vop_6010_pal_cif);
- }
- }
- } else {
- solo_enc->width = solo_dev->video_hsize;
- solo_enc->height = solo_dev->video_vsize << 1;
- solo_enc->bw_weight <<= 2;
- if (solo_dev->type == SOLO_DEV_6110) {
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- vop = vop_6110_ntsc_d1;
- vop_len = sizeof(vop_6110_ntsc_d1);
- } else {
- vop = vop_6110_pal_d1;
- vop_len = sizeof(vop_6110_pal_d1);
- }
- } else {
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC) {
- vop = vop_6010_ntsc_d1;
- vop_len = sizeof(vop_6010_ntsc_d1);
- } else {
- vop = vop_6010_pal_d1;
- vop_len = sizeof(vop_6010_pal_d1);
- }
- }
- }
-
- memcpy(solo_enc->vop, vop, vop_len);
-
- /* Some fixups for 6010/M4V */
- if (solo_dev->type == SOLO_DEV_6010) {
- u16 fps = solo_dev->fps * 1000;
- u16 interval = solo_enc->interval * 1000;
-
- vop = solo_enc->vop;
-
- /* Frame rate and interval */
- vop[22] = fps >> 4;
- vop[23] = ((fps << 4) & 0xf0) | 0x0c
- | ((interval >> 13) & 0x3);
- vop[24] = (interval >> 5) & 0xff;
- vop[25] = ((interval << 3) & 0xf8) | 0x04;
- }
-
- solo_enc->vop_len = vop_len;
-
- /* Now handle the jpeg header */
- vop = solo_enc->jpeg_header;
- vop[SOF0_START + 5] = 0xff & (solo_enc->height >> 8);
- vop[SOF0_START + 6] = 0xff & solo_enc->height;
- vop[SOF0_START + 7] = 0xff & (solo_enc->width >> 8);
- vop[SOF0_START + 8] = 0xff & solo_enc->width;
-
- memcpy(vop + DQT_START,
- jpeg_dqt[solo_g_jpeg_qp(solo_dev, solo_enc->ch)], DQT_LEN);
-}
-
-static int solo_enc_on(struct solo_enc_dev *solo_enc)
-{
- u8 ch = solo_enc->ch;
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- u8 interval;
-
- solo_update_mode(solo_enc);
-
- /* Make sure to do a bandwidth check */
- if (solo_enc->bw_weight > solo_dev->enc_bw_remain)
- return -EBUSY;
- solo_enc->sequence = 0;
- solo_dev->enc_bw_remain -= solo_enc->bw_weight;
-
- if (solo_enc->type == SOLO_ENC_TYPE_EXT)
- solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(ch), 1);
-
- /* Disable all encoding for this channel */
- solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), 0);
-
- /* Common for both std and ext encoding */
- solo_reg_write(solo_dev, SOLO_VE_CH_INTL(ch),
- solo_enc->interlaced ? 1 : 0);
-
- if (solo_enc->interlaced)
- interval = solo_enc->interval - 1;
- else
- interval = solo_enc->interval;
-
- /* Standard encoding only */
- solo_reg_write(solo_dev, SOLO_VE_CH_GOP(ch), solo_enc->gop);
- solo_reg_write(solo_dev, SOLO_VE_CH_QP(ch), solo_enc->qp);
- solo_reg_write(solo_dev, SOLO_CAP_CH_INTV(ch), interval);
-
- /* Extended encoding only */
- solo_reg_write(solo_dev, SOLO_VE_CH_GOP_E(ch), solo_enc->gop);
- solo_reg_write(solo_dev, SOLO_VE_CH_QP_E(ch), solo_enc->qp);
- solo_reg_write(solo_dev, SOLO_CAP_CH_INTV_E(ch), interval);
-
- /* Enables the standard encoder */
- solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(ch), solo_enc->mode);
-
- return 0;
-}
-
-static void solo_enc_off(struct solo_enc_dev *solo_enc)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- solo_dev->enc_bw_remain += solo_enc->bw_weight;
-
- solo_reg_write(solo_dev, SOLO_CAP_CH_SCALE(solo_enc->ch), 0);
- solo_reg_write(solo_dev, SOLO_CAP_CH_COMP_ENA_E(solo_enc->ch), 0);
-}
-
-static int enc_get_mpeg_dma(struct solo_dev *solo_dev, dma_addr_t dma,
- unsigned int off, unsigned int size)
-{
- int ret;
-
- if (off > SOLO_MP4E_EXT_SIZE(solo_dev))
- return -EINVAL;
-
- /* Single shot */
- if (off + size <= SOLO_MP4E_EXT_SIZE(solo_dev)) {
- return solo_p2m_dma_t(solo_dev, 0, dma,
- SOLO_MP4E_EXT_ADDR(solo_dev) + off, size,
- 0, 0);
- }
-
- /* Buffer wrap */
- ret = solo_p2m_dma_t(solo_dev, 0, dma,
- SOLO_MP4E_EXT_ADDR(solo_dev) + off,
- SOLO_MP4E_EXT_SIZE(solo_dev) - off, 0, 0);
-
- if (!ret) {
- ret = solo_p2m_dma_t(solo_dev, 0,
- dma + SOLO_MP4E_EXT_SIZE(solo_dev) - off,
- SOLO_MP4E_EXT_ADDR(solo_dev),
- size + off - SOLO_MP4E_EXT_SIZE(solo_dev), 0, 0);
- }
-
- return ret;
-}
-
-/* Build a descriptor queue out of an SG list and send it to the P2M for
- * processing. */
-static int solo_send_desc(struct solo_enc_dev *solo_enc, int skip,
- struct vb2_dma_sg_desc *vbuf, int off, int size,
- unsigned int base, unsigned int base_size)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct scatterlist *sg;
- int i;
- int ret;
-
- if (WARN_ON_ONCE(size > FRAME_BUF_SIZE))
- return -EINVAL;
-
- solo_enc->desc_count = 1;
-
- for_each_sg(vbuf->sglist, sg, vbuf->num_pages, i) {
- struct solo_p2m_desc *desc;
- dma_addr_t dma;
- int len;
- int left = base_size - off;
-
- desc = &solo_enc->desc_items[solo_enc->desc_count++];
- dma = sg_dma_address(sg);
- len = sg_dma_len(sg);
-
- /* We assume this is smaller than the scatter size */
- BUG_ON(skip >= len);
- if (skip) {
- len -= skip;
- dma += skip;
- size -= skip;
- skip = 0;
- }
-
- len = min(len, size);
-
- if (len <= left) {
- /* Single descriptor */
- solo_p2m_fill_desc(desc, 0, dma, base + off,
- len, 0, 0);
- } else {
- /* Buffer wrap */
- /* XXX: Do these as separate DMA requests, to avoid
- timeout errors triggered by awkwardly sized
- descriptors. See
- <https://github.com/bluecherrydvr/solo6x10/issues/8>
- */
- ret = solo_p2m_dma_t(solo_dev, 0, dma, base + off,
- left, 0, 0);
- if (ret)
- return ret;
-
- ret = solo_p2m_dma_t(solo_dev, 0, dma + left, base,
- len - left, 0, 0);
- if (ret)
- return ret;
-
- solo_enc->desc_count--;
- }
-
- size -= len;
- if (size <= 0)
- break;
-
- off += len;
- if (off >= base_size)
- off -= base_size;
-
- /* Because we may use two descriptors per loop */
- if (solo_enc->desc_count >= (solo_enc->desc_nelts - 1)) {
- ret = solo_p2m_dma_desc(solo_dev, solo_enc->desc_items,
- solo_enc->desc_dma,
- solo_enc->desc_count - 1);
- if (ret)
- return ret;
- solo_enc->desc_count = 1;
- }
- }
-
- if (solo_enc->desc_count <= 1)
- return 0;
-
- return solo_p2m_dma_desc(solo_dev, solo_enc->desc_items, solo_enc->desc_dma,
- solo_enc->desc_count - 1);
-}
-
-static int solo_fill_jpeg(struct solo_enc_dev *solo_enc,
- struct vb2_buffer *vb, struct vop_header *vh)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct vb2_dma_sg_desc *vbuf = vb2_dma_sg_plane_desc(vb, 0);
- int frame_size;
- int ret;
-
- vb->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
-
- if (vb2_plane_size(vb, 0) < vh->jpeg_size + solo_enc->jpeg_len)
- return -EIO;
-
- sg_copy_from_buffer(vbuf->sglist, vbuf->num_pages,
- solo_enc->jpeg_header,
- solo_enc->jpeg_len);
-
- frame_size = (vh->jpeg_size + solo_enc->jpeg_len + (DMA_ALIGN - 1))
- & ~(DMA_ALIGN - 1);
- vb2_set_plane_payload(vb, 0, vh->jpeg_size + solo_enc->jpeg_len);
-
- dma_map_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
- DMA_FROM_DEVICE);
- ret = solo_send_desc(solo_enc, solo_enc->jpeg_len, vbuf, vh->jpeg_off,
- frame_size, SOLO_JPEG_EXT_ADDR(solo_dev),
- SOLO_JPEG_EXT_SIZE(solo_dev));
- dma_unmap_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
- DMA_FROM_DEVICE);
- return ret;
-}
-
-static int solo_fill_mpeg(struct solo_enc_dev *solo_enc,
- struct vb2_buffer *vb, struct vop_header *vh)
-{
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct vb2_dma_sg_desc *vbuf = vb2_dma_sg_plane_desc(vb, 0);
- int frame_off, frame_size;
- int skip = 0;
- int ret;
-
- if (vb2_plane_size(vb, 0) < vh->mpeg_size)
- return -EIO;
-
- /* If this is a key frame, add extra header */
- if (!vh->vop_type) {
- sg_copy_from_buffer(vbuf->sglist, vbuf->num_pages,
- solo_enc->vop,
- solo_enc->vop_len);
-
- skip = solo_enc->vop_len;
-
- vb->v4l2_buf.flags |= V4L2_BUF_FLAG_KEYFRAME;
- vb2_set_plane_payload(vb, 0, vh->mpeg_size + solo_enc->vop_len);
- } else {
- vb->v4l2_buf.flags |= V4L2_BUF_FLAG_PFRAME;
- vb2_set_plane_payload(vb, 0, vh->mpeg_size);
- }
-
- /* Now get the actual mpeg payload */
- frame_off = (vh->mpeg_off + sizeof(*vh))
- % SOLO_MP4E_EXT_SIZE(solo_dev);
- frame_size = (vh->mpeg_size + skip + (DMA_ALIGN - 1))
- & ~(DMA_ALIGN - 1);
-
- dma_map_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
- DMA_FROM_DEVICE);
- ret = solo_send_desc(solo_enc, skip, vbuf, frame_off, frame_size,
- SOLO_MP4E_EXT_ADDR(solo_dev),
- SOLO_MP4E_EXT_SIZE(solo_dev));
- dma_unmap_sg(&solo_dev->pdev->dev, vbuf->sglist, vbuf->num_pages,
- DMA_FROM_DEVICE);
- return ret;
-}
-
-static int solo_enc_fillbuf(struct solo_enc_dev *solo_enc,
- struct vb2_buffer *vb, struct solo_enc_buf *enc_buf)
-{
- struct vop_header *vh = enc_buf->vh;
- int ret;
-
- /* Check for motion flags */
- vb->v4l2_buf.flags &= ~(V4L2_BUF_FLAG_MOTION_ON |
- V4L2_BUF_FLAG_MOTION_DETECTED);
- if (solo_is_motion_on(solo_enc)) {
- vb->v4l2_buf.flags |= V4L2_BUF_FLAG_MOTION_ON;
- if (enc_buf->motion)
- vb->v4l2_buf.flags |= V4L2_BUF_FLAG_MOTION_DETECTED;
- }
-
- if (solo_enc->fmt == V4L2_PIX_FMT_MPEG4)
- ret = solo_fill_mpeg(solo_enc, vb, vh);
- else
- ret = solo_fill_jpeg(solo_enc, vb, vh);
-
- if (!ret) {
- vb->v4l2_buf.sequence = solo_enc->sequence++;
- vb->v4l2_buf.timestamp.tv_sec = vh->sec;
- vb->v4l2_buf.timestamp.tv_usec = vh->usec;
- }
-
- vb2_buffer_done(vb, ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-
- return ret;
-}
-
-static void solo_enc_handle_one(struct solo_enc_dev *solo_enc,
- struct solo_enc_buf *enc_buf)
-{
- struct solo_vb2_buf *vb;
- unsigned long flags;
-
- mutex_lock(&solo_enc->lock);
- if (solo_enc->type != enc_buf->type)
- goto unlock;
-
- spin_lock_irqsave(&solo_enc->av_lock, flags);
- if (list_empty(&solo_enc->vidq_active)) {
- spin_unlock_irqrestore(&solo_enc->av_lock, flags);
- goto unlock;
- }
- vb = list_first_entry(&solo_enc->vidq_active, struct solo_vb2_buf, list);
- list_del(&vb->list);
- spin_unlock_irqrestore(&solo_enc->av_lock, flags);
-
- solo_enc_fillbuf(solo_enc, &vb->vb, enc_buf);
-unlock:
- mutex_unlock(&solo_enc->lock);
-}
-
-void solo_enc_v4l2_isr(struct solo_dev *solo_dev)
-{
- wake_up_interruptible_all(&solo_dev->ring_thread_wait);
-}
-
-static void solo_handle_ring(struct solo_dev *solo_dev)
-{
- for (;;) {
- struct solo_enc_dev *solo_enc;
- struct solo_enc_buf enc_buf;
- u32 mpeg_current, off;
- u8 ch;
- u8 cur_q;
-
- /* Check if the hardware has any new ones in the queue */
- cur_q = solo_reg_read(solo_dev, SOLO_VE_STATE(11)) & 0xff;
- if (cur_q == solo_dev->enc_idx)
- break;
-
- mpeg_current = solo_reg_read(solo_dev,
- SOLO_VE_MPEG4_QUE(solo_dev->enc_idx));
- solo_dev->enc_idx = (solo_dev->enc_idx + 1) % MP4_QS;
-
- ch = (mpeg_current >> 24) & 0x1f;
- off = mpeg_current & 0x00ffffff;
-
- if (ch >= SOLO_MAX_CHANNELS) {
- ch -= SOLO_MAX_CHANNELS;
- enc_buf.type = SOLO_ENC_TYPE_EXT;
- } else
- enc_buf.type = SOLO_ENC_TYPE_STD;
-
- solo_enc = solo_dev->v4l2_enc[ch];
- if (solo_enc == NULL) {
- dev_err(&solo_dev->pdev->dev,
- "Got spurious packet for channel %d\n", ch);
- continue;
- }
-
- /* FAIL... */
- if (enc_get_mpeg_dma(solo_dev, solo_dev->vh_dma, off,
- sizeof(struct vop_header)))
- continue;
-
- enc_buf.vh = (struct vop_header *)solo_dev->vh_buf;
- enc_buf.vh->mpeg_off -= SOLO_MP4E_EXT_ADDR(solo_dev);
- enc_buf.vh->jpeg_off -= SOLO_JPEG_EXT_ADDR(solo_dev);
-
- /* Sanity check */
- if (enc_buf.vh->mpeg_off != off)
- continue;
-
- if (solo_motion_detected(solo_enc))
- enc_buf.motion = 1;
- else
- enc_buf.motion = 0;
-
- solo_enc_handle_one(solo_enc, &enc_buf);
- }
-}
-
-static int solo_ring_thread(void *data)
-{
- struct solo_dev *solo_dev = data;
- DECLARE_WAITQUEUE(wait, current);
-
- set_freezable();
- add_wait_queue(&solo_dev->ring_thread_wait, &wait);
-
- for (;;) {
- long timeout = schedule_timeout_interruptible(HZ);
- if (timeout == -ERESTARTSYS || kthread_should_stop())
- break;
- solo_irq_off(solo_dev, SOLO_IRQ_ENCODER);
- solo_handle_ring(solo_dev);
- solo_irq_on(solo_dev, SOLO_IRQ_ENCODER);
- try_to_freeze();
- }
-
- remove_wait_queue(&solo_dev->ring_thread_wait, &wait);
-
- return 0;
-}
-
-static int solo_enc_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
- unsigned int *num_buffers, unsigned int *num_planes,
- unsigned int sizes[], void *alloc_ctxs[])
-{
- sizes[0] = FRAME_BUF_SIZE;
- *num_planes = 1;
-
- if (*num_buffers < MIN_VID_BUFFERS)
- *num_buffers = MIN_VID_BUFFERS;
-
- return 0;
-}
-
-static void solo_enc_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_queue *vq = vb->vb2_queue;
- struct solo_enc_dev *solo_enc = vb2_get_drv_priv(vq);
- struct solo_vb2_buf *solo_vb =
- container_of(vb, struct solo_vb2_buf, vb);
-
- spin_lock(&solo_enc->av_lock);
- list_add_tail(&solo_vb->list, &solo_enc->vidq_active);
- spin_unlock(&solo_enc->av_lock);
-}
-
-static int solo_ring_start(struct solo_dev *solo_dev)
-{
- solo_dev->ring_thread = kthread_run(solo_ring_thread, solo_dev,
- SOLO6X10_NAME "_ring");
- if (IS_ERR(solo_dev->ring_thread)) {
- int err = PTR_ERR(solo_dev->ring_thread);
- solo_dev->ring_thread = NULL;
- return err;
- }
-
- solo_irq_on(solo_dev, SOLO_IRQ_ENCODER);
-
- return 0;
-}
-
-static void solo_ring_stop(struct solo_dev *solo_dev)
-{
- if (solo_dev->ring_thread) {
- kthread_stop(solo_dev->ring_thread);
- solo_dev->ring_thread = NULL;
- }
-
- solo_irq_off(solo_dev, SOLO_IRQ_ENCODER);
-}
-
-static int solo_enc_start_streaming(struct vb2_queue *q, unsigned int count)
-{
- struct solo_enc_dev *solo_enc = vb2_get_drv_priv(q);
- int ret;
-
- ret = solo_enc_on(solo_enc);
- if (ret)
- return ret;
- return solo_ring_start(solo_enc->solo_dev);
-}
-
-static int solo_enc_stop_streaming(struct vb2_queue *q)
-{
- struct solo_enc_dev *solo_enc = vb2_get_drv_priv(q);
-
- solo_enc_off(solo_enc);
- INIT_LIST_HEAD(&solo_enc->vidq_active);
- solo_ring_stop(solo_enc->solo_dev);
- return 0;
-}
-
-static struct vb2_ops solo_enc_video_qops = {
- .queue_setup = solo_enc_queue_setup,
- .buf_queue = solo_enc_buf_queue,
- .start_streaming = solo_enc_start_streaming,
- .stop_streaming = solo_enc_stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-static int solo_enc_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- strcpy(cap->driver, SOLO6X10_NAME);
- snprintf(cap->card, sizeof(cap->card), "Softlogic 6x10 Enc %d",
- solo_enc->ch);
- snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
- pci_name(solo_dev->pdev));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
- return 0;
-}
-
-static int solo_enc_enum_input(struct file *file, void *priv,
- struct v4l2_input *input)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- if (input->index)
- return -EINVAL;
-
- snprintf(input->name, sizeof(input->name), "Encoder %d",
- solo_enc->ch + 1);
- input->type = V4L2_INPUT_TYPE_CAMERA;
- input->std = solo_enc->vfd->tvnorms;
-
- if (!tw28_get_video_status(solo_dev, solo_enc->ch))
- input->status = V4L2_IN_ST_NO_SIGNAL;
-
- return 0;
-}
-
-static int solo_enc_set_input(struct file *file, void *priv,
- unsigned int index)
-{
- if (index)
- return -EINVAL;
-
- return 0;
-}
-
-static int solo_enc_get_input(struct file *file, void *priv,
- unsigned int *index)
-{
- *index = 0;
-
- return 0;
-}
-
-static int solo_enc_enum_fmt_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- switch (f->index) {
- case 0:
- f->pixelformat = V4L2_PIX_FMT_MPEG4;
- strcpy(f->description, "MPEG-4 AVC");
- break;
- case 1:
- f->pixelformat = V4L2_PIX_FMT_MJPEG;
- strcpy(f->description, "MJPEG");
- break;
- default:
- return -EINVAL;
- }
-
- f->flags = V4L2_FMT_FLAG_COMPRESSED;
-
- return 0;
-}
-
-static int solo_enc_try_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct v4l2_pix_format *pix = &f->fmt.pix;
-
- if (pix->pixelformat != V4L2_PIX_FMT_MPEG4 &&
- pix->pixelformat != V4L2_PIX_FMT_MJPEG)
- return -EINVAL;
-
- if (pix->width < solo_dev->video_hsize ||
- pix->height < solo_dev->video_vsize << 1) {
- /* Default to CIF 1/2 size */
- pix->width = solo_dev->video_hsize >> 1;
- pix->height = solo_dev->video_vsize;
- } else {
- /* Full frame */
- pix->width = solo_dev->video_hsize;
- pix->height = solo_dev->video_vsize << 1;
- }
-
- switch (pix->field) {
- case V4L2_FIELD_NONE:
- case V4L2_FIELD_INTERLACED:
- break;
- case V4L2_FIELD_ANY:
- default:
- pix->field = V4L2_FIELD_INTERLACED;
- break;
- }
-
- /* Just set these */
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->sizeimage = FRAME_BUF_SIZE;
- pix->bytesperline = 0;
- pix->priv = 0;
-
- return 0;
-}
-
-static int solo_enc_set_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct v4l2_pix_format *pix = &f->fmt.pix;
- int ret;
-
- if (vb2_is_busy(&solo_enc->vidq))
- return -EBUSY;
-
- ret = solo_enc_try_fmt_cap(file, priv, f);
- if (ret)
- return ret;
-
- if (pix->width == solo_dev->video_hsize)
- solo_enc->mode = SOLO_ENC_MODE_D1;
- else
- solo_enc->mode = SOLO_ENC_MODE_CIF;
-
- /* This does not change the encoder at all */
- solo_enc->fmt = pix->pixelformat;
-
- /*
- * More information is needed about these 'extended' types. As far
- * as I can tell these are basically additional video streams with
- * different MPEG encoding attributes that can run in parallel with
- * the main stream. If so, then this should be implemented as a
- * second video node. Abusing priv like this is certainly not the
- * right approach.
- if (pix->priv)
- solo_enc->type = SOLO_ENC_TYPE_EXT;
- */
- return 0;
-}
-
-static int solo_enc_get_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct v4l2_pix_format *pix = &f->fmt.pix;
-
- pix->width = solo_enc->width;
- pix->height = solo_enc->height;
- pix->pixelformat = solo_enc->fmt;
- pix->field = solo_enc->interlaced ? V4L2_FIELD_INTERLACED :
- V4L2_FIELD_NONE;
- pix->sizeimage = FRAME_BUF_SIZE;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->priv = 0;
-
- return 0;
-}
-
-static int solo_enc_g_std(struct file *file, void *priv, v4l2_std_id *i)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
- *i = V4L2_STD_NTSC_M;
- else
- *i = V4L2_STD_PAL;
- return 0;
-}
-
-static int solo_enc_s_std(struct file *file, void *priv, v4l2_std_id std)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
-
- return solo_set_video_type(solo_enc->solo_dev, std & V4L2_STD_PAL);
-}
-
-static int solo_enum_framesizes(struct file *file, void *priv,
- struct v4l2_frmsizeenum *fsize)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- if (fsize->pixel_format != V4L2_PIX_FMT_MPEG4 &&
- fsize->pixel_format != V4L2_PIX_FMT_MJPEG)
- return -EINVAL;
-
- switch (fsize->index) {
- case 0:
- fsize->discrete.width = solo_dev->video_hsize >> 1;
- fsize->discrete.height = solo_dev->video_vsize;
- break;
- case 1:
- fsize->discrete.width = solo_dev->video_hsize;
- fsize->discrete.height = solo_dev->video_vsize << 1;
- break;
- default:
- return -EINVAL;
- }
-
- fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
-
- return 0;
-}
-
-static int solo_enum_frameintervals(struct file *file, void *priv,
- struct v4l2_frmivalenum *fintv)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
-
- if (fintv->pixel_format != V4L2_PIX_FMT_MPEG4 &&
- fintv->pixel_format != V4L2_PIX_FMT_MJPEG)
- return -EINVAL;
- if (fintv->index)
- return -EINVAL;
- if ((fintv->width != solo_dev->video_hsize >> 1 ||
- fintv->height != solo_dev->video_vsize) &&
- (fintv->width != solo_dev->video_hsize ||
- fintv->height != solo_dev->video_vsize << 1))
- return -EINVAL;
-
- fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
-
- fintv->stepwise.min.numerator = 1;
- fintv->stepwise.min.denominator = solo_dev->fps;
-
- fintv->stepwise.max.numerator = 15;
- fintv->stepwise.max.denominator = solo_dev->fps;
-
- fintv->stepwise.step.numerator = 1;
- fintv->stepwise.step.denominator = solo_dev->fps;
-
- return 0;
-}
-
-static int solo_g_parm(struct file *file, void *priv,
- struct v4l2_streamparm *sp)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct v4l2_captureparm *cp = &sp->parm.capture;
-
- cp->capability = V4L2_CAP_TIMEPERFRAME;
- cp->timeperframe.numerator = solo_enc->interval;
- cp->timeperframe.denominator = solo_dev->fps;
- cp->capturemode = 0;
- /* XXX: Shouldn't we be able to get/set this from videobuf? */
- cp->readbuffers = 2;
-
- return 0;
-}
-
-static int solo_s_parm(struct file *file, void *priv,
- struct v4l2_streamparm *sp)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct v4l2_captureparm *cp = &sp->parm.capture;
-
- if (vb2_is_streaming(&solo_enc->vidq))
- return -EBUSY;
-
- if ((cp->timeperframe.numerator == 0) ||
- (cp->timeperframe.denominator == 0)) {
- /* reset framerate */
- cp->timeperframe.numerator = 1;
- cp->timeperframe.denominator = solo_dev->fps;
- }
-
- if (cp->timeperframe.denominator != solo_dev->fps)
- cp->timeperframe.denominator = solo_dev->fps;
-
- if (cp->timeperframe.numerator > 15)
- cp->timeperframe.numerator = 15;
-
- solo_enc->interval = cp->timeperframe.numerator;
-
- cp->capability = V4L2_CAP_TIMEPERFRAME;
- cp->readbuffers = 2;
-
- solo_update_mode(solo_enc);
- return 0;
-}
-
-static long solo_enc_default(struct file *file, void *fh,
- bool valid_prio, int cmd, void *arg)
-{
- struct solo_enc_dev *solo_enc = video_drvdata(file);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- struct solo_motion_thresholds *thresholds = arg;
-
- switch (cmd) {
- case SOLO_IOC_G_MOTION_THRESHOLDS:
- *thresholds = solo_enc->motion_thresholds;
- return 0;
-
- case SOLO_IOC_S_MOTION_THRESHOLDS:
- if (!valid_prio)
- return -EBUSY;
- solo_enc->motion_thresholds = *thresholds;
- if (solo_enc->motion_enabled && !solo_enc->motion_global)
- return solo_set_motion_block(solo_dev, solo_enc->ch,
- &solo_enc->motion_thresholds);
- return 0;
- default:
- return -ENOTTY;
- }
-}
-
-static int solo_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct solo_enc_dev *solo_enc =
- container_of(ctrl->handler, struct solo_enc_dev, hdl);
- struct solo_dev *solo_dev = solo_enc->solo_dev;
- int err;
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- case V4L2_CID_HUE:
- case V4L2_CID_SHARPNESS:
- return tw28_set_ctrl_val(solo_dev, ctrl->id, solo_enc->ch,
- ctrl->val);
- case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
- solo_enc->gop = ctrl->val;
- return 0;
- case V4L2_CID_MOTION_THRESHOLD:
- solo_enc->motion_thresh = ctrl->val;
- if (!solo_enc->motion_global || !solo_enc->motion_enabled)
- return 0;
- return solo_set_motion_threshold(solo_dev, solo_enc->ch, ctrl->val);
- case V4L2_CID_MOTION_MODE:
- solo_enc->motion_global = ctrl->val == 1;
- solo_enc->motion_enabled = ctrl->val > 0;
- if (ctrl->val) {
- if (solo_enc->motion_global)
- solo_set_motion_threshold(solo_dev, solo_enc->ch,
- solo_enc->motion_thresh);
- else
- solo_set_motion_block(solo_dev, solo_enc->ch,
- &solo_enc->motion_thresholds);
- }
- solo_motion_toggle(solo_enc, ctrl->val);
- return 0;
- case V4L2_CID_OSD_TEXT:
- strcpy(solo_enc->osd_text, ctrl->string);
- err = solo_osd_print(solo_enc);
- return err;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static const struct v4l2_file_operations solo_enc_fops = {
- .owner = THIS_MODULE,
- .open = v4l2_fh_open,
- .release = vb2_fop_release,
- .read = vb2_fop_read,
- .poll = vb2_fop_poll,
- .mmap = vb2_fop_mmap,
- .unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops solo_enc_ioctl_ops = {
- .vidioc_querycap = solo_enc_querycap,
- .vidioc_s_std = solo_enc_s_std,
- .vidioc_g_std = solo_enc_g_std,
- /* Input callbacks */
- .vidioc_enum_input = solo_enc_enum_input,
- .vidioc_s_input = solo_enc_set_input,
- .vidioc_g_input = solo_enc_get_input,
- /* Video capture format callbacks */
- .vidioc_enum_fmt_vid_cap = solo_enc_enum_fmt_cap,
- .vidioc_try_fmt_vid_cap = solo_enc_try_fmt_cap,
- .vidioc_s_fmt_vid_cap = solo_enc_set_fmt_cap,
- .vidioc_g_fmt_vid_cap = solo_enc_get_fmt_cap,
- /* Streaming I/O */
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- /* Frame size and interval */
- .vidioc_enum_framesizes = solo_enum_framesizes,
- .vidioc_enum_frameintervals = solo_enum_frameintervals,
- /* Video capture parameters */
- .vidioc_s_parm = solo_s_parm,
- .vidioc_g_parm = solo_g_parm,
- /* Logging and events */
- .vidioc_log_status = v4l2_ctrl_log_status,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
- .vidioc_default = solo_enc_default,
-};
-
-static const struct video_device solo_enc_template = {
- .name = SOLO6X10_NAME,
- .fops = &solo_enc_fops,
- .ioctl_ops = &solo_enc_ioctl_ops,
- .minor = -1,
- .release = video_device_release,
- .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL,
-};
-
-static const struct v4l2_ctrl_ops solo_ctrl_ops = {
- .s_ctrl = solo_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config solo_motion_threshold_ctrl = {
- .ops = &solo_ctrl_ops,
- .id = V4L2_CID_MOTION_THRESHOLD,
- .name = "Motion Detection Threshold",
- .type = V4L2_CTRL_TYPE_INTEGER,
- .max = 0xffff,
- .def = SOLO_DEF_MOT_THRESH,
- .step = 1,
- .flags = V4L2_CTRL_FLAG_SLIDER,
-};
-
-static const char * const solo_motion_mode_menu[] = {
- "Disabled",
- "Global Threshold",
- "Regional Threshold",
- NULL
-};
-
-static const struct v4l2_ctrl_config solo_motion_enable_ctrl = {
- .ops = &solo_ctrl_ops,
- .id = V4L2_CID_MOTION_MODE,
- .name = "Motion Detection Mode",
- .type = V4L2_CTRL_TYPE_MENU,
- .qmenu = solo_motion_mode_menu,
- .max = 2,
-};
-
-static const struct v4l2_ctrl_config solo_osd_text_ctrl = {
- .ops = &solo_ctrl_ops,
- .id = V4L2_CID_OSD_TEXT,
- .name = "OSD Text",
- .type = V4L2_CTRL_TYPE_STRING,
- .max = OSD_TEXT_MAX,
- .step = 1,
-};
-
-static struct solo_enc_dev *solo_enc_alloc(struct solo_dev *solo_dev,
- u8 ch, unsigned nr)
-{
- struct solo_enc_dev *solo_enc;
- struct v4l2_ctrl_handler *hdl;
- int ret;
- int x, y;
-
- solo_enc = kzalloc(sizeof(*solo_enc), GFP_KERNEL);
- if (!solo_enc)
- return ERR_PTR(-ENOMEM);
-
- hdl = &solo_enc->hdl;
- v4l2_ctrl_handler_init(hdl, 10);
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_CONTRAST, 0, 255, 1, 128);
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_SATURATION, 0, 255, 1, 128);
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_HUE, 0, 255, 1, 128);
- if (tw28_has_sharpness(solo_dev, ch))
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_SHARPNESS, 0, 15, 1, 0);
- v4l2_ctrl_new_std(hdl, &solo_ctrl_ops,
- V4L2_CID_MPEG_VIDEO_GOP_SIZE, 1, 255, 1, solo_dev->fps);
- v4l2_ctrl_new_custom(hdl, &solo_motion_threshold_ctrl, NULL);
- v4l2_ctrl_new_custom(hdl, &solo_motion_enable_ctrl, NULL);
- v4l2_ctrl_new_custom(hdl, &solo_osd_text_ctrl, NULL);
- if (hdl->error) {
- ret = hdl->error;
- goto hdl_free;
- }
-
- solo_enc->solo_dev = solo_dev;
- solo_enc->ch = ch;
- mutex_init(&solo_enc->lock);
- spin_lock_init(&solo_enc->av_lock);
- INIT_LIST_HEAD(&solo_enc->vidq_active);
- solo_enc->fmt = V4L2_PIX_FMT_MPEG4;
- solo_enc->type = SOLO_ENC_TYPE_STD;
-
- solo_enc->qp = SOLO_DEFAULT_QP;
- solo_enc->gop = solo_dev->fps;
- solo_enc->interval = 1;
- solo_enc->mode = SOLO_ENC_MODE_CIF;
- solo_enc->motion_global = true;
- solo_enc->motion_thresh = SOLO_DEF_MOT_THRESH;
- for (y = 0; y < SOLO_MOTION_SZ; y++)
- for (x = 0; x < SOLO_MOTION_SZ; x++)
- solo_enc->motion_thresholds.thresholds[y][x] =
- SOLO_DEF_MOT_THRESH;
-
- solo_enc->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- solo_enc->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
- solo_enc->vidq.ops = &solo_enc_video_qops;
- solo_enc->vidq.mem_ops = &vb2_dma_sg_memops;
- solo_enc->vidq.drv_priv = solo_enc;
- solo_enc->vidq.gfp_flags = __GFP_DMA32;
- solo_enc->vidq.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- solo_enc->vidq.buf_struct_size = sizeof(struct solo_vb2_buf);
- solo_enc->vidq.lock = &solo_enc->lock;
- ret = vb2_queue_init(&solo_enc->vidq);
- if (ret)
- goto hdl_free;
- solo_update_mode(solo_enc);
-
- spin_lock_init(&solo_enc->motion_lock);
-
- /* Initialize this per encoder */
- solo_enc->jpeg_len = sizeof(jpeg_header);
- memcpy(solo_enc->jpeg_header, jpeg_header, solo_enc->jpeg_len);
-
- solo_enc->desc_nelts = 32;
- solo_enc->desc_items = pci_alloc_consistent(solo_dev->pdev,
- sizeof(struct solo_p2m_desc) *
- solo_enc->desc_nelts, &solo_enc->desc_dma);
- ret = -ENOMEM;
- if (solo_enc->desc_items == NULL)
- goto hdl_free;
-
- solo_enc->vfd = video_device_alloc();
- if (!solo_enc->vfd)
- goto pci_free;
-
- *solo_enc->vfd = solo_enc_template;
- solo_enc->vfd->v4l2_dev = &solo_dev->v4l2_dev;
- solo_enc->vfd->ctrl_handler = hdl;
- solo_enc->vfd->queue = &solo_enc->vidq;
- solo_enc->vfd->lock = &solo_enc->lock;
- set_bit(V4L2_FL_USE_FH_PRIO, &solo_enc->vfd->flags);
- video_set_drvdata(solo_enc->vfd, solo_enc);
- ret = video_register_device(solo_enc->vfd, VFL_TYPE_GRABBER, nr);
- if (ret < 0)
- goto vdev_release;
-
- snprintf(solo_enc->vfd->name, sizeof(solo_enc->vfd->name),
- "%s-enc (%i/%i)", SOLO6X10_NAME, solo_dev->vfd->num,
- solo_enc->vfd->num);
-
- return solo_enc;
-
-vdev_release:
- video_device_release(solo_enc->vfd);
-pci_free:
- pci_free_consistent(solo_enc->solo_dev->pdev,
- sizeof(struct solo_p2m_desc) * solo_enc->desc_nelts,
- solo_enc->desc_items, solo_enc->desc_dma);
-hdl_free:
- v4l2_ctrl_handler_free(hdl);
- kfree(solo_enc);
- return ERR_PTR(ret);
-}
-
-static void solo_enc_free(struct solo_enc_dev *solo_enc)
-{
- if (solo_enc == NULL)
- return;
-
- video_unregister_device(solo_enc->vfd);
- v4l2_ctrl_handler_free(&solo_enc->hdl);
- kfree(solo_enc);
-}
-
-int solo_enc_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
-{
- int i;
-
- init_waitqueue_head(&solo_dev->ring_thread_wait);
-
- solo_dev->vh_size = sizeof(struct vop_header);
- solo_dev->vh_buf = pci_alloc_consistent(solo_dev->pdev,
- solo_dev->vh_size,
- &solo_dev->vh_dma);
- if (solo_dev->vh_buf == NULL)
- return -ENOMEM;
-
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_dev->v4l2_enc[i] = solo_enc_alloc(solo_dev, i, nr);
- if (IS_ERR(solo_dev->v4l2_enc[i]))
- break;
- }
-
- if (i != solo_dev->nr_chans) {
- int ret = PTR_ERR(solo_dev->v4l2_enc[i]);
- while (i--)
- solo_enc_free(solo_dev->v4l2_enc[i]);
- pci_free_consistent(solo_dev->pdev, solo_dev->vh_size,
- solo_dev->vh_buf, solo_dev->vh_dma);
- solo_dev->vh_buf = NULL;
- return ret;
- }
-
- if (solo_dev->type == SOLO_DEV_6010)
- solo_dev->enc_bw_remain = solo_dev->fps * 4 * 4;
- else
- solo_dev->enc_bw_remain = solo_dev->fps * 4 * 5;
-
- dev_info(&solo_dev->pdev->dev, "Encoders as /dev/video%d-%d\n",
- solo_dev->v4l2_enc[0]->vfd->num,
- solo_dev->v4l2_enc[solo_dev->nr_chans - 1]->vfd->num);
-
- return 0;
-}
-
-void solo_enc_v4l2_exit(struct solo_dev *solo_dev)
-{
- int i;
-
- for (i = 0; i < solo_dev->nr_chans; i++)
- solo_enc_free(solo_dev->v4l2_enc[i]);
-
- if (solo_dev->vh_buf)
- pci_free_consistent(solo_dev->pdev, solo_dev->vh_size,
- solo_dev->vh_buf, solo_dev->vh_dma);
-}
+++ /dev/null
-/*
- * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com>
- *
- * Original author:
- * Ben Collins <bcollins@ubuntu.com>
- *
- * Additional work by:
- * John Brooks <john.brooks@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
-
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-event.h>
-#include <media/videobuf2-dma-contig.h>
-
-#include "solo6x10.h"
-#include "solo6x10-tw28.h"
-
-/* Image size is two fields, SOLO_HW_BPL is one horizontal line in hardware */
-#define SOLO_HW_BPL 2048
-#define solo_vlines(__solo) (__solo->video_vsize * 2)
-#define solo_image_size(__solo) (solo_bytesperline(__solo) * \
- solo_vlines(__solo))
-#define solo_bytesperline(__solo) (__solo->video_hsize * 2)
-
-#define MIN_VID_BUFFERS 2
-
-static inline void erase_on(struct solo_dev *solo_dev)
-{
- solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, SOLO_VO_DISP_ERASE_ON);
- solo_dev->erasing = 1;
- solo_dev->frame_blank = 0;
-}
-
-static inline int erase_off(struct solo_dev *solo_dev)
-{
- if (!solo_dev->erasing)
- return 0;
-
- /* First time around, assert erase off */
- if (!solo_dev->frame_blank)
- solo_reg_write(solo_dev, SOLO_VO_DISP_ERASE, 0);
- /* Keep the erasing flag on for 8 frames minimum */
- if (solo_dev->frame_blank++ >= 8)
- solo_dev->erasing = 0;
-
- return 1;
-}
-
-void solo_video_in_isr(struct solo_dev *solo_dev)
-{
- wake_up_interruptible_all(&solo_dev->disp_thread_wait);
-}
-
-static void solo_win_setup(struct solo_dev *solo_dev, u8 ch,
- int sx, int sy, int ex, int ey, int scale)
-{
- if (ch >= solo_dev->nr_chans)
- return;
-
- /* Here, we just keep window/channel the same */
- solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL0(ch),
- SOLO_VI_WIN_CHANNEL(ch) |
- SOLO_VI_WIN_SX(sx) |
- SOLO_VI_WIN_EX(ex) |
- SOLO_VI_WIN_SCALE(scale));
-
- solo_reg_write(solo_dev, SOLO_VI_WIN_CTRL1(ch),
- SOLO_VI_WIN_SY(sy) |
- SOLO_VI_WIN_EY(ey));
-}
-
-static int solo_v4l2_ch_ext_4up(struct solo_dev *solo_dev, u8 idx, int on)
-{
- u8 ch = idx * 4;
-
- if (ch >= solo_dev->nr_chans)
- return -EINVAL;
-
- if (!on) {
- u8 i;
- for (i = ch; i < ch + 4; i++)
- solo_win_setup(solo_dev, i, solo_dev->video_hsize,
- solo_vlines(solo_dev),
- solo_dev->video_hsize,
- solo_vlines(solo_dev), 0);
- return 0;
- }
-
- /* Row 1 */
- solo_win_setup(solo_dev, ch, 0, 0, solo_dev->video_hsize / 2,
- solo_vlines(solo_dev) / 2, 3);
- solo_win_setup(solo_dev, ch + 1, solo_dev->video_hsize / 2, 0,
- solo_dev->video_hsize, solo_vlines(solo_dev) / 2, 3);
- /* Row 2 */
- solo_win_setup(solo_dev, ch + 2, 0, solo_vlines(solo_dev) / 2,
- solo_dev->video_hsize / 2, solo_vlines(solo_dev), 3);
- solo_win_setup(solo_dev, ch + 3, solo_dev->video_hsize / 2,
- solo_vlines(solo_dev) / 2, solo_dev->video_hsize,
- solo_vlines(solo_dev), 3);
-
- return 0;
-}
-
-static int solo_v4l2_ch_ext_16up(struct solo_dev *solo_dev, int on)
-{
- int sy, ysize, hsize, i;
-
- if (!on) {
- for (i = 0; i < 16; i++)
- solo_win_setup(solo_dev, i, solo_dev->video_hsize,
- solo_vlines(solo_dev),
- solo_dev->video_hsize,
- solo_vlines(solo_dev), 0);
- return 0;
- }
-
- ysize = solo_vlines(solo_dev) / 4;
- hsize = solo_dev->video_hsize / 4;
-
- for (sy = 0, i = 0; i < 4; i++, sy += ysize) {
- solo_win_setup(solo_dev, i * 4, 0, sy, hsize,
- sy + ysize, 5);
- solo_win_setup(solo_dev, (i * 4) + 1, hsize, sy,
- hsize * 2, sy + ysize, 5);
- solo_win_setup(solo_dev, (i * 4) + 2, hsize * 2, sy,
- hsize * 3, sy + ysize, 5);
- solo_win_setup(solo_dev, (i * 4) + 3, hsize * 3, sy,
- solo_dev->video_hsize, sy + ysize, 5);
- }
-
- return 0;
-}
-
-static int solo_v4l2_ch(struct solo_dev *solo_dev, u8 ch, int on)
-{
- u8 ext_ch;
-
- if (ch < solo_dev->nr_chans) {
- solo_win_setup(solo_dev, ch, on ? 0 : solo_dev->video_hsize,
- on ? 0 : solo_vlines(solo_dev),
- solo_dev->video_hsize, solo_vlines(solo_dev),
- on ? 1 : 0);
- return 0;
- }
-
- if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
- return -EINVAL;
-
- ext_ch = ch - solo_dev->nr_chans;
-
- /* 4up's first */
- if (ext_ch < 4)
- return solo_v4l2_ch_ext_4up(solo_dev, ext_ch, on);
-
- /* Remaining case is 16up for 16-port */
- return solo_v4l2_ch_ext_16up(solo_dev, on);
-}
-
-static int solo_v4l2_set_ch(struct solo_dev *solo_dev, u8 ch)
-{
- if (ch >= solo_dev->nr_chans + solo_dev->nr_ext)
- return -EINVAL;
-
- erase_on(solo_dev);
-
- solo_v4l2_ch(solo_dev, solo_dev->cur_disp_ch, 0);
- solo_v4l2_ch(solo_dev, ch, 1);
-
- solo_dev->cur_disp_ch = ch;
-
- return 0;
-}
-
-static void solo_fillbuf(struct solo_dev *solo_dev,
- struct vb2_buffer *vb)
-{
- dma_addr_t vbuf;
- unsigned int fdma_addr;
- int error = -1;
- int i;
-
- vbuf = vb2_dma_contig_plane_dma_addr(vb, 0);
- if (!vbuf)
- goto finish_buf;
-
- if (erase_off(solo_dev)) {
- void *p = vb2_plane_vaddr(vb, 0);
- int image_size = solo_image_size(solo_dev);
- for (i = 0; i < image_size; i += 2) {
- ((u8 *)p)[i] = 0x80;
- ((u8 *)p)[i + 1] = 0x00;
- }
- error = 0;
- } else {
- fdma_addr = SOLO_DISP_EXT_ADDR + (solo_dev->old_write *
- (SOLO_HW_BPL * solo_vlines(solo_dev)));
-
- error = solo_p2m_dma_t(solo_dev, 0, vbuf, fdma_addr,
- solo_bytesperline(solo_dev),
- solo_vlines(solo_dev), SOLO_HW_BPL);
- }
-
-finish_buf:
- if (!error) {
- vb2_set_plane_payload(vb, 0,
- solo_vlines(solo_dev) * solo_bytesperline(solo_dev));
- vb->v4l2_buf.sequence = solo_dev->sequence++;
- v4l2_get_timestamp(&vb->v4l2_buf.timestamp);
- }
-
- vb2_buffer_done(vb, error ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
-}
-
-static void solo_thread_try(struct solo_dev *solo_dev)
-{
- struct solo_vb2_buf *vb;
-
- /* Only "break" from this loop if slock is held, otherwise
- * just return. */
- for (;;) {
- unsigned int cur_write;
-
- cur_write = SOLO_VI_STATUS0_PAGE(
- solo_reg_read(solo_dev, SOLO_VI_STATUS0));
- if (cur_write == solo_dev->old_write)
- return;
-
- spin_lock(&solo_dev->slock);
-
- if (list_empty(&solo_dev->vidq_active))
- break;
-
- vb = list_first_entry(&solo_dev->vidq_active, struct solo_vb2_buf,
- list);
-
- solo_dev->old_write = cur_write;
- list_del(&vb->list);
-
- spin_unlock(&solo_dev->slock);
-
- solo_fillbuf(solo_dev, &vb->vb);
- }
-
- assert_spin_locked(&solo_dev->slock);
- spin_unlock(&solo_dev->slock);
-}
-
-static int solo_thread(void *data)
-{
- struct solo_dev *solo_dev = data;
- DECLARE_WAITQUEUE(wait, current);
-
- set_freezable();
- add_wait_queue(&solo_dev->disp_thread_wait, &wait);
-
- for (;;) {
- long timeout = schedule_timeout_interruptible(HZ);
- if (timeout == -ERESTARTSYS || kthread_should_stop())
- break;
- solo_thread_try(solo_dev);
- try_to_freeze();
- }
-
- remove_wait_queue(&solo_dev->disp_thread_wait, &wait);
-
- return 0;
-}
-
-static int solo_start_thread(struct solo_dev *solo_dev)
-{
- int ret = 0;
-
- solo_dev->kthread = kthread_run(solo_thread, solo_dev, SOLO6X10_NAME "_disp");
-
- if (IS_ERR(solo_dev->kthread)) {
- ret = PTR_ERR(solo_dev->kthread);
- solo_dev->kthread = NULL;
- return ret;
- }
- solo_irq_on(solo_dev, SOLO_IRQ_VIDEO_IN);
-
- return ret;
-}
-
-static void solo_stop_thread(struct solo_dev *solo_dev)
-{
- if (!solo_dev->kthread)
- return;
-
- solo_irq_off(solo_dev, SOLO_IRQ_VIDEO_IN);
- kthread_stop(solo_dev->kthread);
- solo_dev->kthread = NULL;
-}
-
-static int solo_queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
- unsigned int *num_buffers, unsigned int *num_planes,
- unsigned int sizes[], void *alloc_ctxs[])
-{
- struct solo_dev *solo_dev = vb2_get_drv_priv(q);
-
- sizes[0] = solo_image_size(solo_dev);
- alloc_ctxs[0] = solo_dev->alloc_ctx;
- *num_planes = 1;
-
- if (*num_buffers < MIN_VID_BUFFERS)
- *num_buffers = MIN_VID_BUFFERS;
-
- return 0;
-}
-
-static int solo_start_streaming(struct vb2_queue *q, unsigned int count)
-{
- struct solo_dev *solo_dev = vb2_get_drv_priv(q);
-
- solo_dev->sequence = 0;
- return solo_start_thread(solo_dev);
-}
-
-static int solo_stop_streaming(struct vb2_queue *q)
-{
- struct solo_dev *solo_dev = vb2_get_drv_priv(q);
-
- solo_stop_thread(solo_dev);
- INIT_LIST_HEAD(&solo_dev->vidq_active);
- return 0;
-}
-
-static void solo_buf_queue(struct vb2_buffer *vb)
-{
- struct vb2_queue *vq = vb->vb2_queue;
- struct solo_dev *solo_dev = vb2_get_drv_priv(vq);
- struct solo_vb2_buf *solo_vb =
- container_of(vb, struct solo_vb2_buf, vb);
-
- spin_lock(&solo_dev->slock);
- list_add_tail(&solo_vb->list, &solo_dev->vidq_active);
- spin_unlock(&solo_dev->slock);
- wake_up_interruptible(&solo_dev->disp_thread_wait);
-}
-
-static const struct vb2_ops solo_video_qops = {
- .queue_setup = solo_queue_setup,
- .buf_queue = solo_buf_queue,
- .start_streaming = solo_start_streaming,
- .stop_streaming = solo_stop_streaming,
- .wait_prepare = vb2_ops_wait_prepare,
- .wait_finish = vb2_ops_wait_finish,
-};
-
-static int solo_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- strcpy(cap->driver, SOLO6X10_NAME);
- strcpy(cap->card, "Softlogic 6x10");
- snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
- pci_name(solo_dev->pdev));
- cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
- V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
- cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
- return 0;
-}
-
-static int solo_enum_ext_input(struct solo_dev *solo_dev,
- struct v4l2_input *input)
-{
- static const char * const dispnames_1[] = { "4UP" };
- static const char * const dispnames_2[] = { "4UP-1", "4UP-2" };
- static const char * const dispnames_5[] = {
- "4UP-1", "4UP-2", "4UP-3", "4UP-4", "16UP"
- };
- const char * const *dispnames;
-
- if (input->index >= (solo_dev->nr_chans + solo_dev->nr_ext))
- return -EINVAL;
-
- if (solo_dev->nr_ext == 5)
- dispnames = dispnames_5;
- else if (solo_dev->nr_ext == 2)
- dispnames = dispnames_2;
- else
- dispnames = dispnames_1;
-
- snprintf(input->name, sizeof(input->name), "Multi %s",
- dispnames[input->index - solo_dev->nr_chans]);
-
- return 0;
-}
-
-static int solo_enum_input(struct file *file, void *priv,
- struct v4l2_input *input)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- if (input->index >= solo_dev->nr_chans) {
- int ret = solo_enum_ext_input(solo_dev, input);
- if (ret < 0)
- return ret;
- } else {
- snprintf(input->name, sizeof(input->name), "Camera %d",
- input->index + 1);
-
- /* We can only check this for normal inputs */
- if (!tw28_get_video_status(solo_dev, input->index))
- input->status = V4L2_IN_ST_NO_SIGNAL;
- }
-
- input->type = V4L2_INPUT_TYPE_CAMERA;
- input->std = solo_dev->vfd->tvnorms;
- return 0;
-}
-
-static int solo_set_input(struct file *file, void *priv, unsigned int index)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
- int ret = solo_v4l2_set_ch(solo_dev, index);
-
- if (!ret) {
- while (erase_off(solo_dev))
- /* Do nothing */;
- }
-
- return ret;
-}
-
-static int solo_get_input(struct file *file, void *priv, unsigned int *index)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- *index = solo_dev->cur_disp_ch;
-
- return 0;
-}
-
-static int solo_enum_fmt_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
-{
- if (f->index)
- return -EINVAL;
-
- f->pixelformat = V4L2_PIX_FMT_UYVY;
- strlcpy(f->description, "UYUV 4:2:2 Packed", sizeof(f->description));
-
- return 0;
-}
-
-static int solo_try_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
- struct v4l2_pix_format *pix = &f->fmt.pix;
- int image_size = solo_image_size(solo_dev);
-
- if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
- return -EINVAL;
-
- pix->width = solo_dev->video_hsize;
- pix->height = solo_vlines(solo_dev);
- pix->sizeimage = image_size;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->pixelformat = V4L2_PIX_FMT_UYVY;
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->priv = 0;
- return 0;
-}
-
-static int solo_set_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- if (vb2_is_busy(&solo_dev->vidq))
- return -EBUSY;
-
- /* For right now, if it doesn't match our running config,
- * then fail */
- return solo_try_fmt_cap(file, priv, f);
-}
-
-static int solo_get_fmt_cap(struct file *file, void *priv,
- struct v4l2_format *f)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
- struct v4l2_pix_format *pix = &f->fmt.pix;
-
- pix->width = solo_dev->video_hsize;
- pix->height = solo_vlines(solo_dev);
- pix->pixelformat = V4L2_PIX_FMT_UYVY;
- pix->field = V4L2_FIELD_INTERLACED;
- pix->sizeimage = solo_image_size(solo_dev);
- pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
- pix->bytesperline = solo_bytesperline(solo_dev);
- pix->priv = 0;
-
- return 0;
-}
-
-static int solo_g_std(struct file *file, void *priv, v4l2_std_id *i)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- if (solo_dev->video_type == SOLO_VO_FMT_TYPE_NTSC)
- *i = V4L2_STD_NTSC_M;
- else
- *i = V4L2_STD_PAL;
- return 0;
-}
-
-int solo_set_video_type(struct solo_dev *solo_dev, bool type)
-{
- int i;
-
- /* Make sure all video nodes are idle */
- if (vb2_is_busy(&solo_dev->vidq))
- return -EBUSY;
- for (i = 0; i < solo_dev->nr_chans; i++)
- if (vb2_is_busy(&solo_dev->v4l2_enc[i]->vidq))
- return -EBUSY;
- solo_dev->video_type = type;
- /* Reconfigure for the new standard */
- solo_disp_init(solo_dev);
- solo_enc_init(solo_dev);
- solo_tw28_init(solo_dev);
- for (i = 0; i < solo_dev->nr_chans; i++)
- solo_update_mode(solo_dev->v4l2_enc[i]);
- return solo_v4l2_set_ch(solo_dev, solo_dev->cur_disp_ch);
-}
-
-static int solo_s_std(struct file *file, void *priv, v4l2_std_id std)
-{
- struct solo_dev *solo_dev = video_drvdata(file);
-
- return solo_set_video_type(solo_dev, std & V4L2_STD_PAL);
-}
-
-static int solo_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct solo_dev *solo_dev =
- container_of(ctrl->handler, struct solo_dev, disp_hdl);
-
- switch (ctrl->id) {
- case V4L2_CID_MOTION_TRACE:
- if (ctrl->val) {
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER,
- SOLO_VI_MOTION_Y_ADD |
- SOLO_VI_MOTION_Y_VALUE(0x20) |
- SOLO_VI_MOTION_CB_VALUE(0x10) |
- SOLO_VI_MOTION_CR_VALUE(0x10));
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR,
- SOLO_VI_MOTION_CR_ADD |
- SOLO_VI_MOTION_Y_VALUE(0x10) |
- SOLO_VI_MOTION_CB_VALUE(0x80) |
- SOLO_VI_MOTION_CR_VALUE(0x10));
- } else {
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BORDER, 0);
- solo_reg_write(solo_dev, SOLO_VI_MOTION_BAR, 0);
- }
- return 0;
- default:
- break;
- }
- return -EINVAL;
-}
-
-static const struct v4l2_file_operations solo_v4l2_fops = {
- .owner = THIS_MODULE,
- .open = v4l2_fh_open,
- .release = vb2_fop_release,
- .read = vb2_fop_read,
- .poll = vb2_fop_poll,
- .mmap = vb2_fop_mmap,
- .unlocked_ioctl = video_ioctl2,
-};
-
-static const struct v4l2_ioctl_ops solo_v4l2_ioctl_ops = {
- .vidioc_querycap = solo_querycap,
- .vidioc_s_std = solo_s_std,
- .vidioc_g_std = solo_g_std,
- /* Input callbacks */
- .vidioc_enum_input = solo_enum_input,
- .vidioc_s_input = solo_set_input,
- .vidioc_g_input = solo_get_input,
- /* Video capture format callbacks */
- .vidioc_enum_fmt_vid_cap = solo_enum_fmt_cap,
- .vidioc_try_fmt_vid_cap = solo_try_fmt_cap,
- .vidioc_s_fmt_vid_cap = solo_set_fmt_cap,
- .vidioc_g_fmt_vid_cap = solo_get_fmt_cap,
- /* Streaming I/O */
- .vidioc_reqbufs = vb2_ioctl_reqbufs,
- .vidioc_querybuf = vb2_ioctl_querybuf,
- .vidioc_qbuf = vb2_ioctl_qbuf,
- .vidioc_dqbuf = vb2_ioctl_dqbuf,
- .vidioc_streamon = vb2_ioctl_streamon,
- .vidioc_streamoff = vb2_ioctl_streamoff,
- /* Logging and events */
- .vidioc_log_status = v4l2_ctrl_log_status,
- .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
- .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
-};
-
-static struct video_device solo_v4l2_template = {
- .name = SOLO6X10_NAME,
- .fops = &solo_v4l2_fops,
- .ioctl_ops = &solo_v4l2_ioctl_ops,
- .minor = -1,
- .release = video_device_release,
- .tvnorms = V4L2_STD_NTSC_M | V4L2_STD_PAL,
-};
-
-static const struct v4l2_ctrl_ops solo_ctrl_ops = {
- .s_ctrl = solo_s_ctrl,
-};
-
-static const struct v4l2_ctrl_config solo_motion_trace_ctrl = {
- .ops = &solo_ctrl_ops,
- .id = V4L2_CID_MOTION_TRACE,
- .name = "Motion Detection Trace",
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .max = 1,
- .step = 1,
-};
-
-int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
-{
- int ret;
- int i;
-
- init_waitqueue_head(&solo_dev->disp_thread_wait);
- spin_lock_init(&solo_dev->slock);
- mutex_init(&solo_dev->lock);
- INIT_LIST_HEAD(&solo_dev->vidq_active);
-
- solo_dev->vfd = video_device_alloc();
- if (!solo_dev->vfd)
- return -ENOMEM;
-
- *solo_dev->vfd = solo_v4l2_template;
- solo_dev->vfd->v4l2_dev = &solo_dev->v4l2_dev;
- solo_dev->vfd->queue = &solo_dev->vidq;
- solo_dev->vfd->lock = &solo_dev->lock;
- v4l2_ctrl_handler_init(&solo_dev->disp_hdl, 1);
- v4l2_ctrl_new_custom(&solo_dev->disp_hdl, &solo_motion_trace_ctrl, NULL);
- if (solo_dev->disp_hdl.error) {
- ret = solo_dev->disp_hdl.error;
- goto fail;
- }
- solo_dev->vfd->ctrl_handler = &solo_dev->disp_hdl;
- set_bit(V4L2_FL_USE_FH_PRIO, &solo_dev->vfd->flags);
-
- video_set_drvdata(solo_dev->vfd, solo_dev);
-
- solo_dev->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- solo_dev->vidq.io_modes = VB2_MMAP | VB2_USERPTR | VB2_READ;
- solo_dev->vidq.ops = &solo_video_qops;
- solo_dev->vidq.mem_ops = &vb2_dma_contig_memops;
- solo_dev->vidq.drv_priv = solo_dev;
- solo_dev->vidq.timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- solo_dev->vidq.gfp_flags = __GFP_DMA32;
- solo_dev->vidq.buf_struct_size = sizeof(struct solo_vb2_buf);
- solo_dev->vidq.lock = &solo_dev->lock;
- ret = vb2_queue_init(&solo_dev->vidq);
- if (ret < 0)
- goto fail;
-
- solo_dev->alloc_ctx = vb2_dma_contig_init_ctx(&solo_dev->pdev->dev);
- if (IS_ERR(solo_dev->alloc_ctx)) {
- dev_err(&solo_dev->pdev->dev, "Can't allocate buffer context");
- return PTR_ERR(solo_dev->alloc_ctx);
- }
-
- /* Cycle all the channels and clear */
- for (i = 0; i < solo_dev->nr_chans; i++) {
- solo_v4l2_set_ch(solo_dev, i);
- while (erase_off(solo_dev))
- /* Do nothing */;
- }
-
- /* Set the default display channel */
- solo_v4l2_set_ch(solo_dev, 0);
- while (erase_off(solo_dev))
- /* Do nothing */;
-
- ret = video_register_device(solo_dev->vfd, VFL_TYPE_GRABBER, nr);
- if (ret < 0)
- goto fail;
-
- snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)",
- SOLO6X10_NAME, solo_dev->vfd->num);
-
- dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with "
- "%d inputs (%d extended)\n", solo_dev->vfd->num,
- solo_dev->nr_chans, solo_dev->nr_ext);
-
- return 0;
-
-fail:
- video_device_release(solo_dev->vfd);
- vb2_dma_contig_cleanup_ctx(solo_dev->alloc_ctx);
- v4l2_ctrl_handler_free(&solo_dev->disp_hdl);
- solo_dev->vfd = NULL;
- return ret;
-}
-
-void solo_v4l2_exit(struct solo_dev *solo_dev)
-{
- if (solo_dev->vfd == NULL)
- return;
-
- video_unregister_device(solo_dev->vfd);
- vb2_dma_contig_cleanup_ctx(solo_dev->alloc_ctx);
- v4l2_ctrl_handler_free(&solo_dev->disp_hdl);
- solo_dev->vfd = NULL;
-}
projects / linux-2.6-microblaze.git / commitdiff