x86/entry/64: Introduce the FIND_PERCPU_BASE macro

GSBASE is used to find per-CPU data in the kernel. But when GSBASE is
unknown, the per-CPU base can be found from the per_cpu_offset table with a
CPU NR.  The CPU NR is extracted from the limit field of the CPUNODE entry
in GDT, or by the RDPID instruction. This is a prerequisite for using
FSGSBASE in the low level entry code.

Also, add the GAS-compatible RDPID macro as binutils 2.21 do not support
it. Support is added in version 2.27.

[ tglx: Massaged changelog ]

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/1557309753-24073-12-git-send-email-chang.seok.bae@intel.com

diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index efb0d1b..9a52436 100644 (file)
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -6,6 +6,7 @@
 #include <asm/percpu.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
+#include <asm/inst.h>
 
 /*
 
@@ -345,6 +346,39 @@ For 32-bit we have the following conventions - kernel is built with
 #endif
 .endm
 
+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+       movq    $__CPUNODE_SEG, \reg
+       lsl     \reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro GET_PERCPU_BASE reg:req
+       ALTERNATIVE \
+               "LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+               "RDPID  \reg", \
+               X86_FEATURE_RDPID
+       andq    $VDSO_CPUNODE_MASK, \reg
+       movq    __per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro GET_PERCPU_BASE reg:req
+       movq    pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
 /*
  * This does 'call enter_from_user_mode' unless we can avoid it based on
  * kernel config or using the static jump infrastructure.

diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796d..d063841 100644 (file)
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@
        .endif
        MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
        .endm
+
+.macro RDPID opd
+       REG_TYPE rdpid_opd_type \opd
+       .if rdpid_opd_type == REG_TYPE_R64
+       R64_NUM rdpid_opd \opd
+       .else
+       R32_NUM rdpid_opd \opd
+       .endif
+       .byte 0xf3
+       .if rdpid_opd > 7
+       PFX_REX rdpid_opd 0
+       .endif
+       .byte 0x0f, 0xc7
+       MODRM 0xc0 rdpid_opd 0x7
+.endm
 #endif
 
 #endif