There are several test cases in the net directory are still using
exit 0 or exit 1 when they need to be skipped. Use kselftest
framework skip code instead so it can help us to distinguish the
return status.
Criterion to filter out what should be fixed in net directory:
grep -r "exit [01]" -B1 | grep -i skip
This change might cause some false-positives if people are running
these test scripts directly and only checking their return codes,
which will change from 0 to 4. However I think the impact should be
small as most of our scripts here are already using this skip code.
And there will be no such issue if running them with the kselftest
framework.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20210823085854.40216-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
#
# server / client nomenclature relative to ns-A
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
VERBOSE=0
NSA_DEV=eth1
which nettest >/dev/null
if [ $? -ne 0 ]; then
echo "'nettest' command not found; skipping tests"
- exit 0
+ exit $ksft_skip
fi
declare -i nfail=0
# This test is for checking IPv4 and IPv6 FIB rules API
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
ret=0
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
# start clean
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
##############################################################################
# Defines
| jq -r '.port | keys[]' | cut -d/ -f-2)
if [ -z "$DEVLINK_DEV" ]; then
echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
- exit 1
+ exit $ksft_skip
fi
if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
echo "SKIP: devlink device's bus is not PCI"
- exit 1
+ exit $ksft_skip
fi
DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
devlink dev show $DEVLINK_DEV &> /dev/null
if [ $? -ne 0 ]; then
echo "SKIP: devlink device \"$DEVLINK_DEV\" not found"
- exit 1
+ exit $ksft_skip
fi
fi
devlink help 2>&1 | grep resource &> /dev/null
if [ $? -ne 0 ]; then
echo "SKIP: iproute2 too old, missing devlink resource support"
- exit 1
+ exit $ksft_skip
fi
devlink help 2>&1 | grep trap &> /dev/null
if [ $? -ne 0 ]; then
echo "SKIP: iproute2 too old, missing devlink trap support"
- exit 1
+ exit $ksft_skip
fi
devlink dev help 2>&1 | grep info &> /dev/null
if [ $? -ne 0 ]; then
echo "SKIP: iproute2 too old, missing devlink dev info support"
- exit 1
+ exit $ksft_skip
fi
##############################################################################
##############################################################################
# Defines
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
# Can be overridden by the configuration file.
PING=${PING:=ping}
PING6=${PING6:=ping6}
tc -j &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc is missing JSON support"
- exit 1
+ exit $ksft_skip
fi
}
matchall action pipe &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc is missing MPLS support"
- return 1
+ return $ksft_skip
fi
tc filter del dev $dev ingress protocol mpls_uc pref 1 handle 1 \
matchall
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc-flower is missing extended MPLS support"
- return 1
+ return $ksft_skip
fi
tc -j filter show dev $dev ingress protocol mpls_uc | jq . &> /dev/null
if [[ $ret -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc-flower produces invalid json output for extended MPLS filters"
- return 1
+ return $ksft_skip
fi
}
tc filter help 2>&1 | grep block &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc is missing shared block support"
- exit 1
+ exit $ksft_skip
fi
}
tc help 2>&1|grep chain &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc is missing chain support"
- exit 1
+ exit $ksft_skip
fi
}
tc actions help 2>&1 | grep -q hw_stats
if [[ $? -ne 0 ]]; then
echo "SKIP: iproute2 too old; tc is missing action hw_stats support"
- exit 1
+ exit $ksft_skip
fi
}
ethtool --help 2>&1| grep lanes &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: ethtool too old; it is missing lanes support"
- exit 1
+ exit $ksft_skip
fi
}
if [[ "$(id -u)" -ne 0 ]]; then
echo "SKIP: need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [[ "$CHECK_TC" = "yes" ]]; then
if [[ ! -x "$(command -v "$cmd")" ]]; then
echo "SKIP: $cmd not installed"
- exit 1
+ exit $ksft_skip
fi
}
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
- exit 1
+ exit $ksft_skip
fi
##############################################################################
ip link show dev ${NETIFS[p$i]} &> /dev/null
if [[ $? -ne 0 ]]; then
echo "SKIP: could not find all required interfaces"
- exit 1
+ exit $ksft_skip
fi
done
ip nexthop ls >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "Nexthop objects not supported; skipping tests"
- exit 0
+ exit $ksft_skip
fi
trap cleanup EXIT
ip nexthop ls >/dev/null 2>&1
if [ $? -ne 0 ]; then
echo "Nexthop objects not supported; skipping tests"
- exit 0
+ exit $ksft_skip
fi
trap cleanup EXIT
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
if [ $(id -u) != 0 ]; then
echo $msg must be run as root >&2
- exit 0
+ exit $ksft_skip
fi
ret=0
# +---------------------------------------------------+
#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
readonly LOCALSID_TABLE_ID=90
readonly IPv6_RT_NETWORK=fd00
readonly IPv6_HS_NETWORK=cafe
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &>/dev/null
# +---------------------------------------------------+
#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
readonly LOCALSID_TABLE_ID=90
readonly IPv6_RT_NETWORK=fd00
readonly IPv4_HS_NETWORK=10.0.0
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &>/dev/null
# +---------------------------------------------------+
#
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
readonly LOCALSID_TABLE_ID=90
readonly IPv6_RT_NETWORK=fd00
readonly IPv6_HS_NETWORK=cafe
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &>/dev/null
# These tests provide an easy way to flip the expected result of any
# of these behaviors for testing kernel patches that change them.
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
# nettest can be run from PATH or from same directory as this selftest
if ! which nettest >/dev/null; then
PATH=$PWD:$PATH
if ! which nettest >/dev/null; then
echo "'nettest' command not found; skipping tests"
- exit 0
+ exit $ksft_skip
fi
fi
# This test is designed for testing the new VRF strict_mode functionality.
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
ret=0
# identifies the "init" network namespace which is often called root network
if [ "$(id -u)" -ne 0 ];then
echo "SKIP: Need root privileges"
- exit 0
+ exit $ksft_skip
fi
if [ ! -x "$(command -v ip)" ]; then
echo "SKIP: Could not run test without ip tool"
- exit 0
+ exit $ksft_skip
fi
modprobe vrf &>/dev/null
if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
echo "SKIP: vrf sysctl does not exist"
- exit 0
+ exit $ksft_skip
fi
cleanup &> /dev/null
projects / linux-2.6-microblaze.git / commitdiff