HID: remove hid-ff

hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 3cfc076..5d9aa95 100644 (file)
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -24,21 +24,8 @@ config USB_HID
 comment "Input core support is needed for USB HID input layer or HIDBP support"
        depends on USB_HID && INPUT=n
 
-config HID_FF
-       bool "Force feedback support (EXPERIMENTAL)"
-       depends on USB_HID && EXPERIMENTAL
-       help
-         Say Y here is you want force feedback support for a few HID devices.
-         See below for a list of supported devices.
-
-         See <file:Documentation/input/ff.txt> for a description of the force
-         feedback API.
-
-         If unsure, say N.
-
 config HID_PID
        bool "PID device support"
-       depends on HID_FF
        help
          Say Y here if you have a PID-compliant device and wish to enable force
          feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such

diff --git a/drivers/hid/usbhid/Makefile b/drivers/hid/usbhid/Makefile
index 5c460fc..1329ecb 100644 (file)
--- a/drivers/hid/usbhid/Makefile
+++ b/drivers/hid/usbhid/Makefile
@@ -13,9 +13,6 @@ endif
 ifeq ($(CONFIG_HID_PID),y)
        usbhid-objs     += hid-pidff.o
 endif
-ifeq ($(CONFIG_HID_FF),y)
-       usbhid-objs     += hid-ff.o
-endif
 
 obj-$(CONFIG_USB_HID)          += usbhid.o
 obj-$(CONFIG_USB_KBD)          += usbkbd.o

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 4ec10aa..07840df 100644 (file)
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -935,7 +935,7 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
        usb_set_intfdata(intf, hid);
        hid->ll_driver = &usb_hid_driver;
        hid->hid_output_raw_report = usbhid_output_raw_report;
-       hid->ff_init = hid_ff_init;
+       hid->ff_init = hid_pidff_init;
 #ifdef CONFIG_USB_HIDDEV
        hid->hiddev_connect = hiddev_connect;
        hid->hiddev_hid_event = hiddev_hid_event;

diff --git a/drivers/hid/usbhid/hid-ff.c b/drivers/hid/usbhid/hid-ff.c
deleted file mode 100644 (file)
index eca01a6..0000000
--- a/drivers/hid/usbhid/hid-ff.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- *  Force feedback support for hid devices.
- *  Not all hid devices use the same protocol. For example, some use PID,
- *  other use their own proprietary procotol.
- *
- *  Copyright (c) 2002-2004 Johann Deneux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so by
- * e-mail - mail your message to <johann.deneux@it.uu.se>
- */
-
-#include <linux/input.h>
-
-#undef DEBUG
-#include <linux/usb.h>
-
-#include <linux/hid.h>
-#include "usbhid.h"
-
-/*
- * This table contains pointers to initializers. To add support for new
- * devices, you need to add the USB vendor and product ids here.
- */
-struct hid_ff_initializer {
-       u16 idVendor;
-       u16 idProduct;
-       int (*init)(struct hid_device*);
-};
-
-/*
- * We try pidff when no other driver is found because PID is the
- * standards compliant way of implementing force feedback in HID.
- * pidff_init() will quickly abort if the device doesn't appear to
- * be a PID device
- */
-static struct hid_ff_initializer inits[] = {
-       { 0,     0,      hid_pidff_init}  /* Matches anything */
-};
-
-int hid_ff_init(struct hid_device* hid)
-{
-       struct hid_ff_initializer *init;
-       int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
-       int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
-
-       for (init = inits; init->idVendor; init++)
-               if (init->idVendor == vendor && init->idProduct == product)
-                       break;
-
-       return init->init(hid);
-}
-EXPORT_SYMBOL_GPL(hid_ff_init);
-

diff --git a/include/linux/hid.h b/include/linux/hid.h
index 0773ba6..dcdef0b 100644 (file)
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -757,17 +757,10 @@ int usbhid_quirks_init(char **quirks_param);
 void usbhid_quirks_exit(void);
 void usbhid_set_leds(struct hid_device *hid);
 
-#ifdef CONFIG_HID_FF
-int hid_ff_init(struct hid_device *hid);
-
 #ifdef CONFIG_HID_PID
 int hid_pidff_init(struct hid_device *hid);
 #else
-static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; }
-#endif
-
-#else
-#define hid_ff_init    NULL
+#define hid_pidff_init NULL
 #endif
 
 #ifdef CONFIG_HID_DEBUG