iio: accel: st_accel: handle deprecated bindings
authorLinus Walleij <linus.walleij@linaro.org>
Thu, 5 Jan 2017 13:32:33 +0000 (14:32 +0100)
committerJonathan Cameron <jic23@kernel.org>
Tue, 10 Jan 2017 19:54:16 +0000 (19:54 +0000)
The earlier deployed LIS3LV02DL driver had already defined a few
DT bindings that need to be supported by the new more generic
driver and listed as compatible but deprecated bindings in the
documentation.

After this we can start to activate the new driver with the old
systems where applicable.

As part of this enablement: make us depend on the old drivers
not being in use so we don't get a kernel with two competing
drivers.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Documentation/devicetree/bindings/iio/accel/lis302.txt
Documentation/devicetree/bindings/iio/st-sensors.txt
drivers/iio/accel/Kconfig
drivers/iio/accel/st_accel_i2c.c
drivers/iio/accel/st_accel_spi.c

index 2a19bff..dfdce67 100644 (file)
@@ -5,7 +5,7 @@ that apply in on the generic device (independent from the bus).
 
 
 Required properties for the SPI bindings:
- - compatible:                 should be set to "st,lis3lv02d_spi"
+ - compatible:                 should be set to "st,lis3lv02d-spi"
  - reg:                        the chipselect index
  - spi-max-frequency:  maximal bus speed, should be set to 1000000 unless
                        constrained by external circuitry
index c040c9a..eaa8fbb 100644 (file)
@@ -27,6 +27,8 @@ standard bindings from pinctrl/pinctrl-bindings.txt.
 Valid compatible strings:
 
 Accelerometers:
+- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
+- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
 - st,lis3lv02dl-accel
 - st,lsm303dlh-accel
 - st,lsm303dlhc-accel
index c68bdb6..ea295fe 100644 (file)
@@ -140,11 +140,13 @@ config IIO_ST_ACCEL_3AXIS
 
 config IIO_ST_ACCEL_I2C_3AXIS
        tristate
+       depends on !SENSORS_LIS3_I2C
        depends on IIO_ST_ACCEL_3AXIS
        depends on IIO_ST_SENSORS_I2C
 
 config IIO_ST_ACCEL_SPI_3AXIS
        tristate
+       depends on !SENSORS_LIS3_SPI
        depends on IIO_ST_ACCEL_3AXIS
        depends on IIO_ST_SENSORS_SPI
 
index 2840649..543f0ad 100644 (file)
 
 #ifdef CONFIG_OF
 static const struct of_device_id st_accel_of_match[] = {
+       {
+               /* An older compatible */
+               .compatible = "st,lis3lv02d",
+               .data = LIS3LV02DL_ACCEL_DEV_NAME,
+       },
        {
                .compatible = "st,lis3lv02dl-accel",
                .data = LIS3LV02DL_ACCEL_DEV_NAME,
index c25ac50..29a15f2 100644 (file)
@@ -65,9 +65,18 @@ static const struct spi_device_id st_accel_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);
 
+#ifdef CONFIG_OF
+static const struct of_device_id lis302dl_spi_dt_ids[] = {
+       { .compatible = "st,lis302dl-spi" },
+       {}
+};
+MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
+#endif
+
 static struct spi_driver st_accel_driver = {
        .driver = {
                .name = "st-accel-spi",
+               .of_match_table = of_match_ptr(lis302dl_spi_dt_ids),
        },
        .probe = st_accel_spi_probe,
        .remove = st_accel_spi_remove,