scsi: sym53c500_cs: Stop using struct scsi_pointer

This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are needed so move those to private command data.

Link: https://lore.kernel.org/r/accf71e293ba3aed6d18c8baeb405de8dfe7c935.1649235939.git.fthain@linux-m68k.org
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index c4a8386..5d7dfef 100644 (file)
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -192,10 +192,11 @@ struct sym53c500_data {
        int fast_pio;
 };
 
-static struct scsi_pointer *sym53c500_scsi_pointer(struct scsi_cmnd *cmd)
-{
-       return scsi_cmd_priv(cmd);
-}
+struct sym53c500_cmd_priv {
+       int status;
+       int message;
+       int phase;
+};
 
 enum Phase {
     idle,
@@ -356,7 +357,7 @@ SYM53C500_intr(int irq, void *dev_id)
        struct sym53c500_data *data =
            (struct sym53c500_data *)dev->hostdata;
        struct scsi_cmnd *curSC = data->current_SC;
-       struct scsi_pointer *scsi_pointer = sym53c500_scsi_pointer(curSC);
+       struct sym53c500_cmd_priv *scp = scsi_cmd_priv(curSC);
        int fast_pio = data->fast_pio;
 
        spin_lock_irqsave(dev->host_lock, flags);
@@ -403,12 +404,11 @@ SYM53C500_intr(int irq, void *dev_id)
 
        if (int_reg & 0x20) {           /* Disconnect */
                DEB(printk("SYM53C500: disconnect intr received\n"));
-               if (scsi_pointer->phase != message_in) {        /* Unexpected disconnect */
+               if (scp->phase != message_in) { /* Unexpected disconnect */
                        curSC->result = DID_NO_CONNECT << 16;
                } else {        /* Command complete, return status and message */
-                       curSC->result = (scsi_pointer->Status & 0xff) |
-                               ((scsi_pointer->Message & 0xff) << 8) |
-                               (DID_OK << 16);
+                       curSC->result = (scp->status & 0xff) |
+                               ((scp->message & 0xff) << 8) | (DID_OK << 16);
                }
                goto idle_out;
        }
@@ -419,7 +419,7 @@ SYM53C500_intr(int irq, void *dev_id)
                        struct scatterlist *sg;
                        int i;
 
-                       scsi_pointer->phase = data_out;
+                       scp->phase = data_out;
                        VDEB(printk("SYM53C500: Data-Out phase\n"));
                        outb(FLUSH_FIFO, port_base + CMD_REG);
                        LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC)); /* Max transfer size */
@@ -438,7 +438,7 @@ SYM53C500_intr(int irq, void *dev_id)
                        struct scatterlist *sg;
                        int i;
 
-                       scsi_pointer->phase = data_in;
+                       scp->phase = data_in;
                        VDEB(printk("SYM53C500: Data-In phase\n"));
                        outb(FLUSH_FIFO, port_base + CMD_REG);
                        LOAD_DMA_COUNT(port_base, scsi_bufflen(curSC)); /* Max transfer size */
@@ -453,12 +453,12 @@ SYM53C500_intr(int irq, void *dev_id)
                break;
 
        case 0x02:              /* COMMAND */
-               scsi_pointer->phase = command_ph;
+               scp->phase = command_ph;
                printk("SYM53C500: Warning: Unknown interrupt occurred in command phase!\n");
                break;
 
        case 0x03:              /* STATUS */
-               scsi_pointer->phase = status_ph;
+               scp->phase = status_ph;
                VDEB(printk("SYM53C500: Status phase\n"));
                outb(FLUSH_FIFO, port_base + CMD_REG);
                outb(INIT_CMD_COMPLETE, port_base + CMD_REG);
@@ -471,24 +471,22 @@ SYM53C500_intr(int irq, void *dev_id)
 
        case 0x06:              /* MESSAGE-OUT */
                DEB(printk("SYM53C500: Message-Out phase\n"));
-               scsi_pointer->phase = message_out;
+               scp->phase = message_out;
                outb(SET_ATN, port_base + CMD_REG);     /* Reject the message */
                outb(MSG_ACCEPT, port_base + CMD_REG);
                break;
 
        case 0x07:              /* MESSAGE-IN */
                VDEB(printk("SYM53C500: Message-In phase\n"));
-               scsi_pointer->phase = message_in;
+               scp->phase = message_in;
 
-               scsi_pointer->Status = inb(port_base + SCSI_FIFO);
-               scsi_pointer->Message = inb(port_base + SCSI_FIFO);
+               scp->status = inb(port_base + SCSI_FIFO);
+               scp->message = inb(port_base + SCSI_FIFO);
 
                VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f));
-               DEB(printk("Status = %02x  Message = %02x\n",
-                          scsi_pointer->Status, scsi_pointer->Message));
+               DEB(printk("Status = %02x  Message = %02x\n", scp->status, scp->message));
 
-               if (scsi_pointer->Message == SAVE_POINTERS ||
-                   scsi_pointer->Message == DISCONNECT) {
+               if (scp->message == SAVE_POINTERS || scp->message == DISCONNECT) {
                        outb(SET_ATN, port_base + CMD_REG);     /* Reject message */
                        DEB(printk("Discarding SAVE_POINTERS message\n"));
                }
@@ -500,7 +498,7 @@ out:
        return IRQ_HANDLED;
 
 idle_out:
-       scsi_pointer->phase = idle;
+       scp->phase = idle;
        scsi_done(curSC);
        goto out;
 }
@@ -548,7 +546,7 @@ SYM53C500_info(struct Scsi_Host *SChost)
 
 static int SYM53C500_queue_lck(struct scsi_cmnd *SCpnt)
 {
-       struct scsi_pointer *scsi_pointer = sym53c500_scsi_pointer(SCpnt);
+       struct sym53c500_cmd_priv *scp = scsi_cmd_priv(SCpnt);
        int i;
        int port_base = SCpnt->device->host->io_port;
        struct sym53c500_data *data =
@@ -565,9 +563,9 @@ static int SYM53C500_queue_lck(struct scsi_cmnd *SCpnt)
        VDEB(printk("\n"));
 
        data->current_SC = SCpnt;
-       scsi_pointer->phase = command_ph;
-       scsi_pointer->Status = 0;
-       scsi_pointer->Message = 0;
+       scp->phase = command_ph;
+       scp->status = 0;
+       scp->message = 0;
 
        /* We are locked here already by the mid layer */
        REG0(port_base);
@@ -682,7 +680,7 @@ static struct scsi_host_template sym53c500_driver_template = {
      .this_id                  = 7,
      .sg_tablesize             = 32,
      .shost_groups             = SYM53C500_shost_groups,
-     .cmd_size                 = sizeof(struct scsi_pointer),
+     .cmd_size                 = sizeof(struct sym53c500_cmd_priv),
 };
 
 static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data)