13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and
``CONFIG_PREEMPT.``
-14) If the patch affects IO/Disk, etc: has been tested with and without
- ``CONFIG_LBDAF.``
+16) All codepaths have been exercised with all lockdep features enabled.
-15) All codepaths have been exercised with all lockdep features enabled.
+17) All new ``/proc`` entries are documented under ``Documentation/``
-16) All new ``/proc`` entries are documented under ``Documentation/``
-
-17) All new kernel boot parameters are documented in
+18) All new kernel boot parameters are documented in
``Documentation/admin-guide/kernel-parameters.rst``.
-18) All new module parameters are documented with ``MODULE_PARM_DESC()``
+19) All new module parameters are documented with ``MODULE_PARM_DESC()``
-19) All new userspace interfaces are documented in ``Documentation/ABI/``.
+20) All new userspace interfaces are documented in ``Documentation/ABI/``.
See ``Documentation/ABI/README`` for more information.
Patches that change userspace interfaces should be CCed to
linux-api@vger.kernel.org.
-20) Check that it all passes ``make headers_check``.
+21) Check that it all passes ``make headers_check``.
-21) Has been checked with injection of at least slab and page-allocation
+22) Has been checked with injection of at least slab and page-allocation
failures. See ``Documentation/fault-injection/``.
If the new code is substantial, addition of subsystem-specific fault
injection might be appropriate.
-22) Newly-added code has been compiled with ``gcc -W`` (use
+23) Newly-added code has been compiled with ``gcc -W`` (use
``make EXTRA_CFLAGS=-W``). This will generate lots of noise, but is good
for finding bugs like "warning: comparison between signed and unsigned".
-23) Tested after it has been merged into the -mm patchset to make sure
+24) Tested after it has been merged into the -mm patchset to make sure
that it still works with all of the other queued patches and various
changes in the VM, VFS, and other subsystems.
-24) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
+25) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
comment in the source code that explains the logic of what they are doing
and why.
-25) If any ioctl's are added by the patch, then also update
+26) If any ioctl's are added by the patch, then also update
``Documentation/ioctl/ioctl-number.txt``.
-26) If your modified source code depends on or uses any of the kernel
+27) If your modified source code depends on or uses any of the kernel
APIs or features that are related to the following ``Kconfig`` symbols,
then test multiple builds with the related ``Kconfig`` symbols disabled
and/or ``=m`` (if that option is available) [not all of these at the
13: CONFIG_SMP, CONFIG_PREEMPT を有効にした場合と無効にした場合の両方で
ビルドした上、動作確認を行ってください。
-14: もしパッチがディスクのI/O性能などに影響を与えるようであれば、
- 'CONFIG_LBDAF'オプションを有効にした場合と無効にした場合の両方で
- テストを実施してみてください。
+14: lockdepの機能を全て有効にした上で、全てのコードパスを評価してください。
-15: lockdepの機能を全て有効にした上で、全てのコードパスを評価してください。
-
-16: /proc に新しいエントリを追加した場合には、Documentation/ 配下に
+15: /proc に新しいエントリを追加した場合には、Documentation/ 配下に
必ずドキュメントを追加してください。
-17: 新しいブートパラメータを追加した場合には、
+16: 新しいブートパラメータを追加した場合には、
必ずDocumentation/admin-guide/kernel-parameters.rst に説明を追加してください。
-18: 新しくmoduleにパラメータを追加した場合には、MODULE_PARM_DESC()を
+17: 新しくmoduleにパラメータを追加した場合には、MODULE_PARM_DESC()を
利用して必ずその説明を記述してください。
-19: 新しいuserspaceインタフェースを作成した場合には、Documentation/ABI/ に
+18: 新しいuserspaceインタフェースを作成した場合には、Documentation/ABI/ に
Documentation/ABI/README を参考にして必ずドキュメントを追加してください。
-20: 'make headers_check'を実行して全く問題がないことを確認してください。
+19: 'make headers_check'を実行して全く問題がないことを確認してください。
-21: 少なくともslabアロケーションとpageアロケーションに失敗した場合の
+20: 少なくともslabアロケーションとpageアロケーションに失敗した場合の
挙動について、fault-injectionを利用して確認してください。
Documentation/fault-injection/ を参照してください。
追加したコードがかなりの量であったならば、サブシステム特有の
fault-injectionを追加したほうが良いかもしれません。
-22: 新たに追加したコードは、`gcc -W'でコンパイルしてください。
+21: 新たに追加したコードは、`gcc -W'でコンパイルしてください。
このオプションは大量の不要なメッセージを出力しますが、
"warning: comparison between signed and unsigned" のようなメッセージは、
バグを見つけるのに役に立ちます。
-23: 投稿したパッチが -mm パッチセットにマージされた後、全ての既存のパッチや
+22: 投稿したパッチが -mm パッチセットにマージされた後、全ての既存のパッチや
VM, VFS およびその他のサブシステムに関する様々な変更と、現時点でも共存
できることを確認するテストを行ってください。
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_SLAB=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ISA_ARCOMPACT=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_JUMP_LABEL=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_GCC_PLUGINS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_JUMP_LABEL=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_GCC_PLUGINS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEBUG_FS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_EMBEDDED=y
CONFIG_SLOB=y
CONFIG_JUMP_LABEL=y
-# CONFIG_LBDAF is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_CLPS711X=y
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_PXA=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_PXA=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_MULTI_V4=y
CONFIG_EMBEDDED=y
CONFIG_SLOB=y
CONFIG_JUMP_LABEL=y
-# CONFIG_LBDAF is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MULTI_V4T=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_MMU is not set
# CONFIG_AIO is not set
CONFIG_EMBEDDED=y
CONFIG_MODULES=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_CMDLINE_PARSER=y
# CONFIG_MMU is not set
# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_LBDAF is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_LBDAF is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_PCI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PA7100LC=y
CONFIG_SMP=y
CONFIG_PROFILING=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_CPU_SUBTYPE_SH7786=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_KALLSYMS is not set
CONFIG_SLAB=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH7724=y
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_SLAB=y
CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_PROFILING=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_GCOV_KERNEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CPU_SUBTYPE_SH7785=y
CONFIG_MEMORY_START=0x40000000
if BLOCK
-config LBDAF
- bool "Support for large (2TB+) block devices and files"
- depends on !64BIT
- default y
- help
- Enable block devices or files of size 2TB and larger.
-
- This option is required to support the full capacity of large
- (2TB+) block devices, including RAID, disk, Network Block Device,
- Logical Volume Manager (LVM) and loopback.
-
- This option also enables support for single files larger than
- 2TB.
-
- The ext4 filesystem requires that this feature be enabled in
- order to support filesystems that have the huge_file feature
- enabled. Otherwise, it will refuse to mount in the read-write
- mode any filesystems that use the huge_file feature, which is
- enabled by default by mke2fs.ext4.
-
- The GFS2 filesystem also requires this feature.
-
- If unsure, say Y.
-
config BLK_SCSI_REQUEST
bool
#define DRBD_MAX_SECTORS_FIXED_BM \
((MD_128MB_SECT - MD_32kB_SECT - MD_4kB_SECT) * (1LL<<(BM_EXT_SHIFT-9)))
-#if !defined(CONFIG_LBDAF) && BITS_PER_LONG == 32
-#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_32
-#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32
-#else
#define DRBD_MAX_SECTORS DRBD_MAX_SECTORS_FIXED_BM
/* 16 TB in units of sectors */
#if BITS_PER_LONG == 32
#define DRBD_MAX_SECTORS_FLEX (1UL << 51)
/* corresponds to (1UL << 38) bits right now. */
#endif
-#endif
/* Estimate max bio size as 256 * PAGE_SIZE,
* so for typical PAGE_SIZE of 4k, that is (1<<20) Byte.
rq_for_each_segment(bvec, req, iter) {
unsigned long flags;
- dev_dbg(&dev->sbd.core, "%s:%u: bio %u: %u sectors from %lu\n",
+ dev_dbg(&dev->sbd.core, "%s:%u: bio %u: %u sectors from %llu\n",
__func__, __LINE__, i, bio_sectors(iter.bio),
iter.bio->bi_iter.bi_sector);
dev->regions[dev->region_idx].size*priv->blocking_factor);
dev_info(&dev->sbd.core,
- "%s is a %s (%llu MiB total, %lu MiB for OtherOS)\n",
+ "%s is a %s (%llu MiB total, %llu MiB for OtherOS)\n",
gendisk->disk_name, priv->model, priv->raw_capacity >> 11,
get_capacity(gendisk) >> 11);
/*
* Funtions to manipulate consecutive chunks
*/
-# if defined(CONFIG_LBDAF) || (BITS_PER_LONG == 64)
-# define DM_CHUNK_CONSECUTIVE_BITS 8
-# define DM_CHUNK_NUMBER_BITS 56
+#define DM_CHUNK_CONSECUTIVE_BITS 8
+#define DM_CHUNK_NUMBER_BITS 56
static inline chunk_t dm_chunk_number(chunk_t chunk)
{
e->new_chunk -= (1ULL << DM_CHUNK_NUMBER_BITS);
}
-# else
-# define DM_CHUNK_CONSECUTIVE_BITS 0
-
-static inline chunk_t dm_chunk_number(chunk_t chunk)
-{
- return chunk;
-}
-
-static inline unsigned dm_consecutive_chunk_count(struct dm_exception *e)
-{
- return 0;
-}
-
-static inline void dm_consecutive_chunk_count_inc(struct dm_exception *e)
-{
-}
-
-static inline void dm_consecutive_chunk_count_dec(struct dm_exception *e)
-{
-}
-
-# endif
-
/*
* Return the number of sectors in the device.
*/
#if BITS_PER_LONG == 64
#define journal_entry_set_sector(je, x) do { smp_wmb(); WRITE_ONCE((je)->u.sector, cpu_to_le64(x)); } while (0)
-#define journal_entry_get_sector(je) le64_to_cpu((je)->u.sector)
-#elif defined(CONFIG_LBDAF)
-#define journal_entry_set_sector(je, x) do { (je)->u.s.sector_lo = cpu_to_le32(x); smp_wmb(); WRITE_ONCE((je)->u.s.sector_hi, cpu_to_le32((x) >> 32)); } while (0)
-#define journal_entry_get_sector(je) le64_to_cpu((je)->u.sector)
#else
-#define journal_entry_set_sector(je, x) do { (je)->u.s.sector_lo = cpu_to_le32(x); smp_wmb(); WRITE_ONCE((je)->u.s.sector_hi, cpu_to_le32(0)); } while (0)
-#define journal_entry_get_sector(je) le32_to_cpu((je)->u.s.sector_lo)
+#define journal_entry_set_sector(je, x) do { (je)->u.s.sector_lo = cpu_to_le32(x); smp_wmb(); WRITE_ONCE((je)->u.s.sector_hi, cpu_to_le32((x) >> 32)); } while (0)
#endif
+#define journal_entry_get_sector(je) le64_to_cpu((je)->u.sector)
#define journal_entry_is_unused(je) ((je)->u.s.sector_hi == cpu_to_le32(-1))
#define journal_entry_set_unused(je) do { ((je)->u.s.sector_hi = cpu_to_le32(-1)); } while (0)
#define journal_entry_is_inprogress(je) ((je)->u.s.sector_hi == cpu_to_le32(-2))
* (not needed for Linear and RAID0 as metadata doesn't
* record this size)
*/
- if (IS_ENABLED(CONFIG_LBDAF) && (u64)rdev->sectors >= (2ULL << 32) &&
- sb->level >= 1)
+ if ((u64)rdev->sectors >= (2ULL << 32) && sb->level >= 1)
rdev->sectors = (sector_t)(2ULL << 32) - 2;
if (rdev->sectors < ((sector_t)sb->size) * 2 && sb->level >= 1)
/* Limit to 4TB as metadata cannot record more than that.
* 4TB == 2^32 KB, or 2*2^32 sectors.
*/
- if (IS_ENABLED(CONFIG_LBDAF) && (u64)num_sectors >= (2ULL << 32) &&
- rdev->mddev->level >= 1)
+ if ((u64)num_sectors >= (2ULL << 32) && rdev->mddev->level >= 1)
num_sectors = (sector_t)(2ULL << 32) - 2;
do {
md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
bb_present = badblocks_check(&nd_region->bb, meta_start,
meta_num, &first_bad, &num_bad);
if (bb_present) {
- dev_dbg(&nd_pfn->dev, "meta: %x badblocks at %lx\n",
+ dev_dbg(&nd_pfn->dev, "meta: %x badblocks at %llx\n",
num_bad, first_bad);
nsoff = ALIGN_DOWN((nd_region->ndr_start
+ (first_bad << 9)) - nsio->res.start,
}
if (rc) {
dev_err(&nd_pfn->dev,
- "error clearing %x badblocks at %lx\n",
+ "error clearing %x badblocks at %llx\n",
num_bad, first_bad);
return rc;
}
#define READ_CAPACITY_RETRIES_ON_RESET 10
-/*
- * Ensure that we don't overflow sector_t when CONFIG_LBDAF is not set
- * and the reported logical block size is bigger than 512 bytes. Note
- * that last_sector is a u64 and therefore logical_to_sectors() is not
- * applicable.
- */
-static bool sd_addressable_capacity(u64 lba, unsigned int sector_size)
-{
- u64 last_sector = (lba + 1ULL) << (ilog2(sector_size) - 9);
-
- if (sizeof(sector_t) == 4 && last_sector > U32_MAX)
- return false;
-
- return true;
-}
-
static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
unsigned char *buffer)
{
return -ENODEV;
}
- if (!sd_addressable_capacity(lba, sector_size)) {
- sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
- "kernel compiled with support for large block "
- "devices.\n");
- sdkp->capacity = 0;
- return -EOVERFLOW;
- }
-
/* Logical blocks per physical block exponent */
sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
return sector_size;
}
- if (!sd_addressable_capacity(lba, sector_size)) {
- sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
- "kernel compiled with support for large block "
- "devices.\n");
- sdkp->capacity = 0;
- return -EOVERFLOW;
- }
-
sdkp->capacity = lba + 1;
sdkp->physical_block_size = sector_size;
return sector_size;
ext4_msg(sb, KERN_ERR,
"filesystem too large to resize to %llu blocks safely",
n_blocks_count);
- if (sizeof(sector_t) < 8)
- ext4_warning(sb, "CONFIG_LBDAF not enabled");
return -EINVAL;
}
loff_t res;
loff_t upper_limit = MAX_LFS_FILESIZE;
- /* small i_blocks in vfs inode? */
- if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
- /*
- * CONFIG_LBDAF is not enabled implies the inode
- * i_block represent total blocks in 512 bytes
- * 32 == size of vfs inode i_blocks * 8
- */
+ BUILD_BUG_ON(sizeof(blkcnt_t) < sizeof(u64));
+
+ if (!has_huge_files) {
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
* number of 512-byte sectors of the file.
*/
- if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
+ if (!has_huge_files) {
/*
- * !has_huge_files or CONFIG_LBDAF not enabled implies that
- * the inode i_block field represents total file blocks in
- * 2^32 512-byte sectors == size of vfs inode i_blocks * 8
+ * !has_huge_files or implies that the inode i_block field
+ * represents total file blocks in 2^32 512-byte sectors ==
+ * size of vfs inode i_blocks * 8
*/
upper_limit = (1LL << 32) - 1;
~EXT4_FEATURE_RO_COMPAT_SUPP));
return 0;
}
- /*
- * Large file size enabled file system can only be mounted
- * read-write on 32-bit systems if kernel is built with CONFIG_LBDAF
- */
- if (ext4_has_feature_huge_file(sb)) {
- if (sizeof(blkcnt_t) < sizeof(u64)) {
- ext4_msg(sb, KERN_ERR, "Filesystem with huge files "
- "cannot be mounted RDWR without "
- "CONFIG_LBDAF");
- return 0;
- }
- }
if (ext4_has_feature_bigalloc(sb) && !ext4_has_feature_extents(sb)) {
ext4_msg(sb, KERN_ERR,
"Can't support bigalloc feature without "
if (err) {
ext4_msg(sb, KERN_ERR, "filesystem"
" too large to mount safely on this system");
- if (sizeof(sector_t) < 8)
- ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
goto failed_mount;
}
config GFS2_FS
tristate "GFS2 file system support"
- depends on (64BIT || LBDAF)
select FS_POSIX_ACL
select CRC32
select LIBCRC32C
config PNFS_BLOCK
tristate
depends on NFS_V4_1 && BLK_DEV_DM
- depends on 64BIT || LBDAF
default NFS_V4
config PNFS_FLEXFILE_LAYOUT
*/
#if BITS_PER_LONG == 32
-# if defined(CONFIG_LBDAF)
BUILD_BUG_ON(sizeof(sector_t) != 8);
/*
* We might be limited by page cache size.
*/
bitshift = 31;
}
-# else
- /*
- * We are limited by the size of sector_t. Use block size, as
- * that's what we expose to the VFS.
- */
- bytes = 1 << bbits;
- trim = 1;
- bitshift = 31;
-# endif
#endif
/*
i_size = i_size_read(src);
/*
- * But if CONFIG_LBDAF (on 32-bit), we ought to make an effort to
- * keep the two halves of i_blocks in sync despite SMP or PREEMPT -
- * though stat's generic_fillattr() doesn't bother, and we won't be
- * applying quotas (where i_blocks does become important) at the
- * upper level.
+ * But on 32-bit, we ought to make an effort to keep the two halves of
+ * i_blocks in sync despite SMP or PREEMPT - though stat's
+ * generic_fillattr() doesn't bother, and we won't be applying quotas
+ * (where i_blocks does become important) at the upper level.
*
* We don't actually know what locking is used at the lower level;
* but if it's a filesystem that supports quotas, it will be using
* include/linux/fs.h). We don't necessarily hold i_mutex when this
* is called, so take i_lock for that case.
*
- * And if CONFIG_LBDAF (on 32-bit), continue our effort to keep the
- * two halves of i_blocks in sync despite SMP or PREEMPT: use i_lock
- * for that case too, and do both at once by combining the tests.
+ * And if on 32-bit, continue our effort to keep the two halves of
+ * i_blocks in sync despite SMP or PREEMPT: use i_lock for that case
+ * too, and do both at once by combining the tests.
*
* There is none of this locking overhead in the 64-bit case.
*/
config XFS_FS
tristate "XFS filesystem support"
depends on BLOCK
- depends on (64BIT || LBDAF)
select EXPORTFS
select LIBCRC32C
select FS_IOMAP
/* Figure out maximum filesize, on Linux this can depend on
* the filesystem blocksize (on 32 bit platforms).
- * __block_write_begin does this in an [unsigned] long...
+ * __block_write_begin does this in an [unsigned] long long...
* page->index << (PAGE_SHIFT - bbits)
* So, for page sized blocks (4K on 32 bit platforms),
* this wraps at around 8Tb (hence MAX_LFS_FILESIZE which is
* (((u64)PAGE_SIZE << (BITS_PER_LONG-1))-1)
* but for smaller blocksizes it is less (bbits = log2 bsize).
- * Note1: get_block_t takes a long (implicit cast from above)
- * Note2: The Large Block Device (LBD and HAVE_SECTOR_T) patch
- * can optionally convert the [unsigned] long from above into
- * an [unsigned] long long.
*/
#if BITS_PER_LONG == 32
-# if defined(CONFIG_LBDAF)
ASSERT(sizeof(sector_t) == 8);
pagefactor = PAGE_SIZE;
bitshift = BITS_PER_LONG;
-# else
- pagefactor = PAGE_SIZE >> (PAGE_SHIFT - blockshift);
-# endif
#endif
return (((uint64_t)pagefactor) << bitshift) - 1;
*/
static inline sector_t part_nr_sects_read(struct hd_struct *part)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_SMP)
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
sector_t nr_sects;
unsigned seq;
do {
nr_sects = part->nr_sects;
} while (read_seqcount_retry(&part->nr_sects_seq, seq));
return nr_sects;
-#elif BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_PREEMPT)
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
sector_t nr_sects;
preempt_disable();
*/
static inline void part_nr_sects_write(struct hd_struct *part, sector_t size)
{
-#if BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_SMP)
+#if BITS_PER_LONG==32 && defined(CONFIG_SMP)
write_seqcount_begin(&part->nr_sects_seq);
part->nr_sects = size;
write_seqcount_end(&part->nr_sects_seq);
-#elif BITS_PER_LONG==32 && defined(CONFIG_LBDAF) && defined(CONFIG_PREEMPT)
+#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPT)
preempt_disable();
part->nr_sects = size;
preempt_enable();
#include <asm/byteorder.h>
#include <asm/div64.h>
#include <uapi/linux/kernel.h>
+#include <asm/div64.h>
#define STACK_MAGIC 0xdeadbeef
#define _RET_IP_ (unsigned long)__builtin_return_address(0)
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-#ifdef CONFIG_LBDAF
-# define sector_div(a, b) do_div(a, b)
-#else
-# define sector_div(n, b)( \
-{ \
- int _res; \
- _res = (n) % (b); \
- (n) /= (b); \
- _res; \
-} \
-)
-#endif
+#define sector_div(a, b) do_div(a, b)
/**
* upper_32_bits - return bits 32-63 of a number
*
* blkcnt_t is the type of the inode's block count.
*/
-#ifdef CONFIG_LBDAF
typedef u64 sector_t;
typedef u64 blkcnt_t;
-#else
-typedef unsigned long sector_t;
-typedef unsigned long blkcnt_t;
-#endif
/*
* The type of an index into the pagecache.
config TEST_KMOD
tristate "kmod stress tester"
depends on m
- depends on BLOCK && (64BIT || LBDAF) # for XFS, BTRFS
depends on NETDEVICES && NET_CORE && INET # for TUN
select TEST_LKM
select XFS_FS
*
* blkcnt_t is the type of the inode's block count.
*/
-#ifdef CONFIG_LBDAF
typedef u64 sector_t;
-#else
-typedef unsigned long sector_t;
-#endif
/*
* The type of an index into the pagecache.
projects / linux-2.6-microblaze.git / commitdiff