ASoC: fsl_sai: Enable 'FIFO continue on error' FCONT bit

FCONT=1 means On FIFO error, the SAI will continue from the
same word that caused the FIFO error to set after the FIFO
warning flag has been cleared.

Set FCONT bit in control register to avoid the channel swap
issue after SAI xrun.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1727676508-22830-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index ab58a44..634168d 100644 (file)
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -613,6 +613,9 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 
        val_cr4 |= FSL_SAI_CR4_FRSZ(slots);
 
+       /* Set to avoid channel swap */
+       val_cr4 |= FSL_SAI_CR4_FCONT;
+
        /* Set to output mode to avoid tri-stated data pins */
        if (tx)
                val_cr4 |= FSL_SAI_CR4_CHMOD;
@@ -699,7 +702,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 
        regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
                           FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
-                          FSL_SAI_CR4_CHMOD_MASK,
+                          FSL_SAI_CR4_CHMOD_MASK | FSL_SAI_CR4_FCONT_MASK,
                           val_cr4);
        regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
                           FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |

diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index dadbd16..9c4d19f 100644 (file)
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -137,6 +137,7 @@
 
 /* SAI Transmit and Receive Configuration 4 Register */
 
+#define FSL_SAI_CR4_FCONT_MASK BIT(28)
 #define FSL_SAI_CR4_FCONT      BIT(28)
 #define FSL_SAI_CR4_FCOMB_SHIFT BIT(26)
 #define FSL_SAI_CR4_FCOMB_SOFT  BIT(27)