)
{
u8 tempval;
- if (PwrState == true) {
+ if (PwrState) {
/* enable BT power cut */
/* 0x6A[14] = 1 */
tempval = rtw_read8(padapter, 0x6B);
u16 tmpV16;
- if (PwrState == true) {
+ if (PwrState) {
/* To avoid cannot access efuse regsiters after disable/enable several times during DTM test. */
/* Suggested by SD1 IsaacHsu. 2013.07.08, added by tynli. */
tempval = rtw_read8(padapter, SDIO_LOCAL_BASE|SDIO_REG_HSUS_CTRL);
rtw_write16(padapter, REG_SYS_CLKR, tmpV16);
}
- if (bWrite == true) {
+ if (bWrite) {
/* Enable LDO 2.5V before read/write action */
tempval = rtw_read8(padapter, EFUSE_TEST+3);
tempval &= 0x0F;
} else {
rtw_write8(padapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
- if (bWrite == true) {
+ if (bWrite) {
/* Disable LDO 2.5V after read/write action */
tempval = rtw_read8(padapter, EFUSE_TEST+3);
rtw_write8(padapter, EFUSE_TEST+3, (tempval & 0x7F));
}
#endif
- if (pHalData->fw_ractrl == true) {
+ if (pHalData->fw_ractrl) {
rtl8723b_set_FwMacIdConfig_cmd(padapter, mac_id, psta->raid, psta->bw_mode, shortGIrate, mask);
}
{
struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
- if (false == pEEPROM->bautoload_fail_flag) { /* autoload OK. */
+ if (!pEEPROM->bautoload_fail_flag) { /* autoload OK. */
if (!pEEPROM->EepromOrEfuse) {
/* Read EFUSE real map to shadow. */
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
}
} else {/* autoload fail */
RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("AutoLoad Fail reported from CR9346!!\n"));
- if (false == pEEPROM->EepromOrEfuse)
+ if (!pEEPROM->EepromOrEfuse)
EFUSE_ShadowMapUpdate(padapter, EFUSE_WIFI, false);
memcpy((void *)PROMContent, (void *)pEEPROM->efuse_eeprom_data, HWSET_MAX_SIZE_8723B);
}
/* */
/* ThermalMeter from EEPROM */
/* */
- if (false == AutoLoadFail)
+ if (!AutoLoadFail)
pHalData->EEPROMThermalMeter = PROMContent[EEPROM_THERMAL_METER_8723B];
else
pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_8723B;
- if ((pHalData->EEPROMThermalMeter == 0xff) || (true == AutoLoadFail)) {
+ if ((pHalData->EEPROMThermalMeter == 0xff) || AutoLoadFail) {
pHalData->bAPKThermalMeterIgnore = true;
pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_8723B;
}
(pattrib->dhcp_pkt != 1) &&
(drv_userate != 1)
#ifdef CONFIG_AUTO_AP_MODE
- && (pattrib->pctrl != true)
+ && (!pattrib->pctrl)
#endif
) {
/* Non EAP & ARP & DHCP type data packet */
- if (pattrib->ampdu_en == true) {
+ if (pattrib->ampdu_en) {
ptxdesc->agg_en = 1; /* AGG EN */
ptxdesc->max_agg_num = 0x1f;
ptxdesc->ampdu_density = pattrib->ampdu_spacing;
ptxdesc->data_ratefb_lmt = 0x1F;
- if (pHalData->fw_ractrl == false) {
+ if (!pHalData->fw_ractrl) {
ptxdesc->userate = 1;
if (pHalData->dmpriv.INIDATA_RATE[pattrib->mac_id] & BIT(7))
ptxdesc->mbssid = pattrib->mbssid & 0xF;
ptxdesc->rty_lmt_en = 1; /* retry limit enable */
- if (pattrib->retry_ctrl == true) {
+ if (pattrib->retry_ctrl) {
ptxdesc->data_rt_lmt = 6;
} else {
ptxdesc->data_rt_lmt = 12;
SET_TX_DESC_QUEUE_SEL_8723B(pDesc, QSLT_MGNT); /* Fixed queue of Mgnt queue */
/* Set NAVUSEHDR to prevent Ps-poll AId filed to be changed to error vlaue by Hw. */
- if (true == IsPsPoll) {
+ if (IsPsPoll) {
SET_TX_DESC_NAV_USE_HDR_8723B(pDesc, 1);
} else {
SET_TX_DESC_HWSEQ_EN_8723B(pDesc, 1); /* Hw set sequence number */
SET_TX_DESC_HWSEQ_SEL_8723B(pDesc, 0);
}
- if (true == IsBTQosNull) {
+ if (IsBTQosNull) {
SET_TX_DESC_BT_INT_8723B(pDesc, 1);
}
/* */
/* Encrypt the data frame if under security mode excepct null data. Suggested by CCW. */
/* */
- if (true == bDataFrame) {
+ if (bDataFrame) {
u32 EncAlg;
EncAlg = padapter->securitypriv.dot11PrivacyAlgrthm;
#ifdef CONFIG_WOWLAN
struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(padapter);
- if (pwrpriv->wowlan_mode == true) {
+ if (pwrpriv->wowlan_mode) {
DBG_871X("%s(): return because wowolan_mode ==true! CMDID =%d\n", __func__, pbuffer[0]);
return;
}
/* keep sn */
padapter->xmitpriv.nqos_ssn = rtw_read16(padapter, REG_NQOS_SEQ);
- if (pwrpriv->bkeepfwalive != true) {
+ if (!pwrpriv->bkeepfwalive) {
/* RX DMA stop */
val32 = rtw_read32(padapter, REG_RXPKT_NUM);
val32 |= RW_RELEASE_EN;
u32 valRCR;
if (
- (padapter->bSurpriseRemoved == true) ||
+ padapter->bSurpriseRemoved ||
(adapter_to_pwrctl(padapter)->rf_pwrstate == rf_off)
) {
/* If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave, */