static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
{
- return 0;
+ unsigned long pc = instruction_pointer(regs);
+ unsigned long instr = *(unsigned long *)pc;
+ int reg = (instr >> 12) & 15;
+
+ /*
+ * If the instruction being executed was a read,
+ * make it look like it read all-ones.
+ */
+ if ((instr & 0x0c100000) == 0x04100000) {
+ unsigned long val;
+
+ if (instr & 0x00400000)
+ val = 255;
+ else
+ val = -1;
+
+ regs->uregs[reg] = val;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ if ((instr & 0x0e100090) == 0x00100090) {
+ regs->uregs[reg] = -1;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ return 1;
}
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
* we can install the handler here without risking it
* accessing some uninitialized driver state.
*/
- hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
- "imprecise external abort");
+ hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0,
+ "external abort on non-linefetch");
return platform_driver_register(&imx6_pcie_driver);
}
config PCI_ENDPOINT
bool "PCI Endpoint Support"
+ depends on HAS_DMA
help
Enable this configuration option to support configurable PCI
endpoint. This should be enabled if the platform has a PCI
if (!pm_runtime_suspended(dev)
|| pci_target_state(pci_dev) != pci_dev->current_state
- || platform_pci_need_resume(pci_dev))
+ || platform_pci_need_resume(pci_dev)
+ || (pci_dev->dev_flags & PCI_DEV_FLAGS_NEEDS_RESUME))
return false;
/*
cdev = &stdev->cdev;
cdev_init(cdev, &switchtec_fops);
cdev->owner = THIS_MODULE;
- cdev->kobj.parent = &dev->kobj;
return stdev;
stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET;
- stdev->partition = ioread8(&stdev->mmio_ntb->partition_id);
+ stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id);
stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count);
stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET;
stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition];
stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET;
+ if (stdev->partition_count < 1)
+ stdev->partition_count = 1;
+
init_pff(stdev);
pci_set_drvdata(pdev, stdev);
SWITCHTEC_EVENT_EN_IRQ,
&stdev->mmio_part_cfg->mrpc_comp_hdr);
- rc = cdev_add(&stdev->cdev, stdev->dev.devt, 1);
- if (rc)
- goto err_put;
-
- rc = device_add(&stdev->dev);
+ rc = cdev_device_add(&stdev->cdev, &stdev->dev);
if (rc)
goto err_devadd;
return 0;
err_devadd:
- cdev_del(&stdev->cdev);
stdev_kill(stdev);
err_put:
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
pci_set_drvdata(pdev, NULL);
- device_del(&stdev->dev);
- cdev_del(&stdev->cdev);
+ cdev_device_del(&stdev->cdev, &stdev->dev);
ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
dev_info(&stdev->dev, "unregistered.\n");
PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT = (__force pci_dev_flags_t) (1 << 9),
/* Do not use FLR even if device advertises PCI_AF_CAP */
PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
+ /*
+ * Resume before calling the driver's system suspend hooks, disabling
+ * the direct_complete optimization.
+ */
+ PCI_DEV_FLAGS_NEEDS_RESUME = (__force pci_dev_flags_t) (1 << 11),
};
enum pci_irq_reroute_variant {