#define MAX_DOZE_WAITING_TIMES_9x 64
/**
-* Function: phy_CalculateBitShift
-*
-* OverView: Get shifted position of the BitMask
-*
-* Input:
-* u32 BitMask,
-*
-* Output: none
-* Return: u32 Return the shift bit bit position of the mask
-*/
+ * phy_CalculateBitShift - Get shifted position of the BitMask.
+ * @BitMask: Bitmask.
+ *
+ * Return: Return the shift bit position of the mask
+ */
static u32 phy_CalculateBitShift(u32 BitMask)
{
u32 i;
/**
-* Function: PHY_QueryBBReg
-*
-* OverView: Read "specific bits" from BB register
-*
-* Input:
-* struct adapter * Adapter,
-* u32 RegAddr, The target address to be readback
-* u32 BitMask The target bit position in the target address
-* to be readback
-* Output: None
-* Return: u32 Data The readback register value
-* Note: This function is equal to "GetRegSetting" in PHY programming guide
-*/
+ * PHY_QueryBBReg - Read "specific bits" from BB register.
+ * @Adapter:
+ * @RegAddr: The target address to be readback
+ * @BitMask: The target bit position in the target address
+ * to be readback
+ *
+ * Return: The readback register value
+ *
+ * .. Note:: This function is equal to "GetRegSetting" in PHY programming
+ * guide
+ */
u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
{
u32 OriginalValue, BitShift;
/**
-* Function: PHY_SetBBReg
-*
-* OverView: Write "Specific bits" to BB register (page 8~)
-*
-* Input:
-* struct adapter * Adapter,
-* u32 RegAddr, The target address to be modified
-* u32 BitMask The target bit position in the target address
-* to be modified
-* u32 Data The new register value in the target bit position
-* of the target address
-*
-* Output: None
-* Return: None
-* Note: This function is equal to "PutRegSetting" in PHY programming guide
-*/
+ * PHY_SetBBReg - Write "Specific bits" to BB register (page 8~).
+ * @Adapter:
+ * @RegAddr: The target address to be modified
+ * @BitMask: The target bit position in the target address
+ * to be modified
+ * @Data: The new register value in the target bit position
+ * of the target address
+ *
+ * .. Note:: This function is equal to "PutRegSetting" in PHY programming
+ * guide
+ */
void PHY_SetBBReg_8723B(
struct adapter *Adapter,
}
/**
-* Function: phy_RFSerialWrite_8723B
-*
-* OverView: Write data to RF register (page 8~)
-*
-* Input:
-* struct adapter * Adapter,
-* RF_PATH eRFPath, Radio path of A/B/C/D
-* u32 Offset, The target address to be read
-* u32 Data The new register Data in the target bit position
-* of the target to be read
-*
-* Output: None
-* Return: None
-* Note: Threre are three types of serial operations:
-* 1. Software serial write
-* 2. Hardware LSSI-Low Speed Serial Interface
-* 3. Hardware HSSI-High speed
-* serial write. Driver need to implement (1) and (2).
-* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
+ * phy_RFSerialWrite_8723B - Write data to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath: Radio path of A/B/C/D
+ * @Offset: The target address to be read
+ * @Data: The new register Data in the target bit position
+ * of the target to be read
+ *
+ * .. Note:: Threre are three types of serial operations:
+ * 1. Software serial write
+ * 2. Hardware LSSI-Low Speed Serial Interface
+ * 3. Hardware HSSI-High speed
+ * serial write. Driver need to implement (1) and (2).
+ * This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
*
- * Note: For RF8256 only
+ * .. Note:: For RF8256 only
* The total count of RTL8256(Zebra4) register is around 36 bit it only employs
* 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
* to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
*
*
*
-*/
+ */
static void phy_RFSerialWrite_8723B(
struct adapter *Adapter,
enum RF_PATH eRFPath,
/**
-* Function: PHY_QueryRFReg
-*
-* OverView: Query "Specific bits" to RF register (page 8~)
-*
-* Input:
-* struct adapter * Adapter,
-* RF_PATH eRFPath, Radio path of A/B/C/D
-* u32 RegAddr, The target address to be read
-* u32 BitMask The target bit position in the target address
-* to be read
-*
-* Output: None
-* Return: u32 Readback value
-* Note: This function is equal to "GetRFRegSetting" in PHY programming guide
-*/
+ * PHY_QueryRFReg - Query "Specific bits" to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath: Radio path of A/B/C/D
+ * @RegAdd: The target address to be read
+ * @BitMask: The target bit position in the target address
+ * to be read
+ *
+ * Return: Readback value
+ *
+ * .. Note:: This function is equal to "GetRFRegSetting" in PHY
+ * programming guide
+ */
u32 PHY_QueryRFReg_8723B(
struct adapter *Adapter,
u8 eRFPath,
}
/**
-* Function: PHY_SetRFReg
-*
-* OverView: Write "Specific bits" to RF register (page 8~)
-*
-* Input:
-* struct adapter * Adapter,
-* RF_PATH eRFPath, Radio path of A/B/C/D
-* u32 RegAddr, The target address to be modified
-* u32 BitMask The target bit position in the target address
-* to be modified
-* u32 Data The new register Data in the target bit position
-* of the target address
-*
-* Output: None
-* Return: None
-* Note: This function is equal to "PutRFRegSetting" in PHY programming guide
-*/
+ * PHY_SetRFReg - Write "Specific bits" to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath: Radio path of A/B/C/D
+ * @RegAddr: The target address to be modified
+ * @BitMask: The target bit position in the target address
+ * to be modified
+ * @Data: The new register Data in the target bit position
+ * of the target address
+ *
+ * .. Note:: This function is equal to "PutRFRegSetting" in PHY
+ * programming guide.
+ */
void PHY_SetRFReg_8723B(
struct adapter *Adapter,
u8 eRFPath,
/*-----------------------------------------------------------------------------
- * Function: PHY_MACConfig8192C
- *
- * Overview: Condig MAC by header file or parameter file.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
+ * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
*
* Revised History:
* When Who Remark
}
/**
-* Function: phy_InitBBRFRegisterDefinition
-*
-* OverView: Initialize Register definition offset for Radio Path A/B/C/D
-*
-* Input:
-* struct adapter * Adapter,
-*
-* Output: None
-* Return: None
-* Note: The initialization value is constant and it should never be changes
-*/
+ * phy_InitBBRFRegisterDefinition - Initialize Register definition offset for
+ * Radio Path A/B/C/D
+ * @Adapter:
+ *
+ * .. Note:: The initialization value is constant and it should never be changes
+ */
static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)
{
struct hal_com_data *pHalData = GET_HAL_DATA(Adapter);
projects / linux-2.6-microblaze.git / commitdiff