[ALSA] Fix AC97 kconfig items

The kconfig items related with AC97-powersave must be outside the
CONFIG_SND_PCI range.  And it'd be better together with CONFIG_SND_AC97.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 79b4d3f..255fd18 100644 (file)
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -161,4 +161,25 @@ config SND_ML403_AC97CR
          To compile this driver as a module, choose M here: the module
          will be called snd-ml403_ac97cr.
 
+config SND_AC97_POWER_SAVE
+       bool "AC97 Power-Saving Mode"
+       depends on SND_AC97_CODEC && EXPERIMENTAL
+       default n
+       help
+         Say Y here to enable the aggressive power-saving support of
+         AC97 codecs.  In this mode, the power-mode is dynamically
+         controlled at each open/close.
+
+         The mode is activated by passing power_save=1 option to
+         snd-ac97-codec driver.  You can toggle it dynamically over
+         sysfs, too.
+
+config SND_AC97_POWER_SAVE_DEFAULT
+       int "Default time-out for AC97 power-save mode"
+       depends on SND_AC97_POWER_SAVE
+       default 0
+       help
+         The default time-out value in seconds for AC97 automatic
+         power-save mode.  0 means to disable the power-save mode.
+
 endif  # SND_DRIVERS

diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index b148c0b..8fe5dac 100644 (file)
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -901,25 +901,4 @@ config SND_YMFPCI_FIRMWARE_IN_KERNEL
          for the YMFPCI driver.  If you choose N here, you need to
          install the firmware files from the alsa-firmware package.
 
-config SND_AC97_POWER_SAVE
-       bool "AC97 Power-Saving Mode"
-       depends on SND_AC97_CODEC && EXPERIMENTAL
-       default n
-       help
-         Say Y here to enable the aggressive power-saving support of
-         AC97 codecs.  In this mode, the power-mode is dynamically
-         controlled at each open/close.
-
-         The mode is activated by passing power_save=1 option to
-         snd-ac97-codec driver.  You can toggle it dynamically over
-         sysfs, too.
-
-config SND_AC97_POWER_SAVE_DEFAULT
-       int "Default time-out for AC97 power-save mode"
-       depends on SND_AC97_POWER_SAVE
-       default 0
-       help
-         The default time-out value in seconds for AC97 automatic
-         power-save mode.  0 means to disable the power-save mode.
-
 endif  # SND_PCI