dt-bindings: display: simple: support non-default data-mapping

Some Displays support more than just a single default LVDS data mapping,
which can be used to run displays on only 3 LVDS lanes in the jeida-18
data-mapping mode.

Add an optional data-mapping property to allow overriding the default
data mapping. As it does not generally apply to any display and bus, use
it selectively on the innolux,g101ice-l01, which supports changing the
data mapping via a strapping pin.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230523-simplepanel_support_nondefault_datamapping-v5-2-0d7928edafab@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523-simplepanel_support_nondefault_datamapping-v5-2-0d7928edafab@pengutronix.de

diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 50143fe..81ac402 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -21,9 +21,9 @@ description: |
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: ../lvds-data-mapping.yaml#
 
 properties:
-
   compatible:
     enum:
     # compatible must be listed in alphabetical order, ordered by compatible.
@@ -359,6 +359,17 @@ properties:
   power-supply: true
   no-hpd: true
   hpd-gpios: true
+  data-mapping: true
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: innolux,g101ice-l01
+then:
+  properties:
+    data-mapping: false
 
 additionalProperties: false
 
@@ -378,3 +389,16 @@ examples:
         };
       };
     };
+  - |
+    panel_lvds: panel-lvds {
+      compatible = "innolux,g101ice-l01";
+      power-supply = <&vcc_lcd_reg>;
+
+      data-mapping = "jeida-24";
+
+      port {
+        panel_in_lvds: endpoint {
+          remote-endpoint = <&ltdc_out_lvds>;
+        };
+      };
+    };