- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
+
+Example configuration:
+
+ pcie: pcie@0xdffff000 {
+ compatible = "snps,dw-pcie";
+ reg = <0xdffff000 0x1000>, /* Controller registers */
+ <0xd0000000 0x2000>; /* PCI config space */
+ reg-names = "ctrlreg", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
+ 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+ interrupts = <25>, <24>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ };
- clock-names: Must include the following additional entries:
- "pcie_phy"
+Optional properties:
+- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
+- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
+- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+
Example:
pcie@0x01000000 {
--- /dev/null
+* ThunderX PCI host controller for pass-1.x silicon
+
+Firmware-initialized PCI host controller to on-chip devices found on
+some Cavium ThunderX processors. These devices have ECAM-based config
+access, but the BARs are all at fixed addresses. We handle the fixed
+addresses by synthesizing Enhanced Allocation (EA) capabilities for
+these devices.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+ pcie@84b000000000 {
+ compatible = "cavium,pci-host-thunder-ecam";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0x30000 0x10000>;
+ bus-range = <0 31>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */
+ ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
+ };
--- /dev/null
+* ThunderX PEM PCIe host controller
+
+Firmware-initialized PCI host controller found on some Cavium
+ThunderX processors.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible : Must be "cavium,pci-host-thunder-pem"
+
+- reg : Two entries: First the configuration space for down
+ stream devices base address and size, as accessed
+ from the parent bus. Second, the register bank of
+ the PEM device PCIe bridge.
+
+Example:
+
+ pci@87e0,c2000000 {
+ compatible = "cavium,pci-host-thunder-pem";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0x10000 0x10000>;
+ bus-range = <0x8f 0xc7>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+
+ reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
+ <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
+ ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
+ <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
+ <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
+ <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
+ <0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
+ <0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
+ <0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+ };
--- /dev/null
+* Xilinx NWL PCIe Root Port Bridge DT description
+
+Required properties:
+- compatible: Should contain "xlnx,nwl-pcie-2.11"
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- reg: Should contain Bridge, PCIe Controller registers location,
+ configuration space, and length
+- reg-names: Must include the following entries:
+ "breg": bridge registers
+ "pcireg": PCIe controller registers
+ "cfg": configuration space region
+- device_type: must be "pci"
+- interrupts: Should contain NWL PCIe interrupt
+- interrupt-names: Must include the following entries:
+ "msi1, msi0": interrupt asserted when MSI is received
+ "intx": interrupt asserted when a legacy interrupt is received
+ "misc": interrupt asserted when miscellaneous is received
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+ mapping of the PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+ Please refer to the standard PCI bus binding document for a more
+ detailed explanation
+- msi-controller: indicates that this is MSI controller node
+- msi-parent: MSI parent of the root complex itself
+- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
+ - interrupt-controller: identifies the node as an interrupt controller
+ - #interrupt-cells: should be set to 1
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+
+Example:
+++++++++
+
+nwl_pcie: pcie@fd0e0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "xlnx,nwl-pcie-2.11";
+ #interrupt-cells = <1>;
+ msi-controller;
+ device_type = "pci";
+ interrupt-parent = <&gic>;
+ interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
+ interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+
+ msi-parent = <&nwl_pcie>;
+ reg = <0x0 0xfd0e0000 0x0 0x1000>,
+ <0x0 0xfd480000 0x0 0x1000>,
+ <0x0 0xe0000000 0x0 0x1000000>;
+ reg-names = "breg", "pcireg", "cfg";
+ ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+};
Please refer to the standard PCI bus binding document for a more
detailed explanation
-Optional properties:
+Optional properties for Zynq/Microblaze:
- bus-range: PCI bus numbers covered
Interrupt controller child node
Example:
++++++++
-
+Zynq:
pci_express: axi-pcie@50000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
- reg = < 0x50000000 0x10000000 >;
+ reg = < 0x50000000 0x1000000 >;
device_type = "pci";
interrupts = < 0 52 4 >;
interrupt-map-mask = <0 0 0 7>;
#interrupt-cells = <1>;
};
};
+
+
+Microblaze:
+ pci_express: axi-pcie@10000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ reg = <0x10000000 0x4000000>;
+ device_type = "pci";
+ interrupt-parent = <µblaze_0_intc>;
+ interrupts = <1 2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ };
F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
+F: drivers/pci/host/pci-hyperv.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/video/fbdev/hyperv_fb.c
S: Maintained
F: drivers/pci/host/*designware*
+PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
+M: Joao Pinto <jpinto@synopsys.com>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/designware-pcie.txt
+F: drivers/pci/host/pcie-designware-plat.c
+
PCI DRIVER FOR GENERIC OF HOSTS
M: Will Deacon <will.deacon@arm.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
+F: drivers/pci/host/pci-host-common.c
F: drivers/pci/host/pci-host-generic.c
PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
S: Maintained
F: drivers/pci/host/*qcom*
+PCIE DRIVER FOR CAVIUM THUNDERX
+M: David Daney <david.daney@cavium.com>
+L: linux-pci@vger.kernel.org
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: Documentation/devicetree/bindings/pci/pci-thunder-*
+F: drivers/pci/host/pci-thunder-*
+
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <asm/machvec.h>
-#include <asm-generic/pci-bridge.h>
/*
* The following structure is used to manage multiple PCI busses.
decisions. */
#define PCI_DMA_BUS_IS_PHYS 0
-#ifdef CONFIG_PCI
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif
-
/* TODO: integrate with include/asm-generic/pci.h ? */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
+config MIGHT_HAVE_PCI
+ bool
+
config TRACE_IRQFLAGS_SUPPORT
def_bool y
source "net/Kconfig"
source "drivers/Kconfig"
+
+menu "Bus Support"
+
+config PCI
+ bool "PCI support" if MIGHT_HAVE_PCI
+ help
+ PCI is the name of a bus system, i.e., the way the CPU talks to
+ the other stuff inside your box. Find out if your board/platform
+ has PCI.
+
+ Note: PCIe support for Synopsys Device will be available only
+ when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
+ say Y, otherwise N.
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
+endmenu
+
source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
source "security/Kconfig"
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 0
+#endif
#endif
extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *)port;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
+
extern void iounmap(const void __iomem *addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
--- /dev/null
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/ioport.h>
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x100000
+
+#define pcibios_assign_all_busses() 1
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o
obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o
+obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += arcksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We don't have to worry about legacy ISA devices, so nothing to do here
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+}
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
+ select MIGHT_HAVE_PCI
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
help
select DMABOUNCE
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
source "drivers/pcmcia/Kconfig"
#define ASMARM_PCI_H
#ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
-
#include <asm/mach/pci.h> /* for pci_sys_data */
extern unsigned long pcibios_min_io;
}
#endif /* __KERNEL__ */
-
#endif
def_bool PCI
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
endmenu
-
-
generic-y += bug.h
generic-y += bugs.h
generic-y += checksum.h
generic-y += msi.h
generic-y += mutex.h
generic-y += pci.h
-generic-y += pci-bridge.h
generic-y += poll.h
generic-y += preempt.h
generic-y += resource.h
#include <linux/dma-mapping.h>
#include <asm/io.h>
-#include <asm-generic/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0
#include <linux/of_platform.h>
#include <linux/slab.h>
-#include <asm/pci-bridge.h>
-
/*
* Called after each bus is probed, but before its children are examined
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-#include <asm-generic/pci-dma-compat.h>
-
#endif /* __ASM_AVR32_PCI_H__ */
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
endmenu
menu "Executable file formats"
#define _ASM_BFIN_PCI_H
#include <linux/scatterlist.h>
-#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
#define PCIBIOS_MIN_IO 0x00001000
#endif /* __KERNEL__ */
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
/* generic pci stuff */
#include <asm-generic/pci.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
-#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
struct pci_dev;
size_t size, int direction);
#endif
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle);
-
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV) (0)
config PCI_SYSCALL
def_bool PCI
-source "drivers/pci/pcie/Kconfig"
-
source "drivers/pci/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
source "drivers/pcmcia/Kconfig"
endmenu
extern unsigned long ia64_max_iommu_merge_mask;
#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL)
-#include <asm-generic/pci-dma-compat.h>
-
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
+ * card will have its BIOS copied to 0xC0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. Before marking the device
* with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
+ * by either arch code or vga-arbitration; if so only apply the fixup to this
+ * already-determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
+ struct resource *res;
if ((strcmp(ia64_platform_name, "dig") != 0)
&& (strcmp(ia64_platform_name, "hpzx1") != 0))
if (!vga_default_device() || pdev == vga_default_device()) {
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
+ res = &pdev->resource[PCI_ROM_RESOURCE];
+
+ pci_disable_rom(pdev);
+ if (res->parent)
+ release_resource(res);
+
+ res->start = 0xC0000;
+ res->end = res->start + 0x20000 - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
+ dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
+ res);
}
}
}
void __iomem *addr;
struct pcidev_info *pcidev_info = NULL;
struct sn_irq_info *sn_irq_info = NULL;
- size_t image_size, size;
+ struct resource *res;
+ size_t size;
if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
panic("%s: Failure obtaining pcidev_info for %s\n",
* of the shadowed copy, and the actual length of the ROM image.
*/
size = pci_resource_len(dev, PCI_ROM_RESOURCE);
- addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
- size);
- image_size = pci_get_rom_size(dev, addr, size);
- dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
- dev->resource[PCI_ROM_RESOURCE].end =
- (unsigned long) addr + image_size - 1;
- dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
+
+ res = &dev->resource[PCI_ROM_RESOURCE];
+
+ pci_disable_rom(dev);
+ if (res->parent)
+ release_resource(res);
+
+ res->start = pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE];
+ res->end = res->start + size - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
}
sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
-
EXPORT_SYMBOL(sn_acpi_slot_fixup);
sn_io_slot_fixup(struct pci_dev *dev)
{
int idx;
- unsigned long addr, end, size, start;
+ struct resource *res;
+ unsigned long addr, size;
struct pcidev_info *pcidev_info;
struct sn_irq_info *sn_irq_info;
int status;
/* Copy over PIO Mapped Addresses */
for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
-
- if (!pcidev_info->pdi_pio_mapped_addr[idx]) {
+ if (!pcidev_info->pdi_pio_mapped_addr[idx])
continue;
- }
- start = dev->resource[idx].start;
- end = dev->resource[idx].end;
- size = end - start;
- if (size == 0) {
+ res = &dev->resource[idx];
+
+ size = res->end - res->start;
+ if (size == 0)
continue;
- }
- addr = pcidev_info->pdi_pio_mapped_addr[idx];
- addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET;
- dev->resource[idx].start = addr;
- dev->resource[idx].end = addr + size;
+
+ res->start = pcidev_info->pdi_pio_mapped_addr[idx];
+ res->end = addr + size;
/*
* if it's already in the device structure, remove it before
* inserting
*/
- if (dev->resource[idx].parent && dev->resource[idx].parent->child)
- release_resource(&dev->resource[idx]);
+ if (res->parent && res->parent->child)
+ release_resource(res);
- if (dev->resource[idx].flags & IORESOURCE_IO)
- insert_resource(&ioport_resource, &dev->resource[idx]);
+ if (res->flags & IORESOURCE_IO)
+ insert_resource(&ioport_resource, res);
else
- insert_resource(&iomem_resource, &dev->resource[idx]);
+ insert_resource(&iomem_resource, res);
/*
- * If ROM, set the actual ROM image size, and mark as
- * shadowed in PROM.
+ * If ROM, mark as shadowed in PROM.
*/
if (idx == PCI_ROM_RESOURCE) {
- size_t image_size;
- void __iomem *rom;
-
- rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
- size + 1);
- image_size = pci_get_rom_size(dev, rom, size + 1);
- dev->resource[PCI_ROM_RESOURCE].end =
- dev->resource[PCI_ROM_RESOURCE].start +
- image_size - 1;
- dev->resource[PCI_ROM_RESOURCE].flags |=
- IORESOURCE_ROM_BIOS_COPY;
+ pci_disable_rom(dev);
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
}
}
sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
-
EXPORT_SYMBOL(sn_io_slot_fixup);
/*
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
endmenu
#ifndef _ASM_M68K_PCI_H
#define _ASM_M68K_PCI_H
-#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
/* The PCI address space does equal the physical memory
config PCI_DOMAINS
def_bool PCI
+config PCI_DOMAINS_GENERIC
+ def_bool PCI_DOMAINS
+
config PCI_SYSCALL
def_bool PCI
#include <asm/prom.h>
#include <asm/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
-
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
- struct pci_controller *hose = pci_bus_to_host(bus);
-
- return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
/* This routine is meant to be used early during boot, when the
* PCI bus numbers have not yet been assigned, and you need to
* issue PCI config cycles to an OF device.
void pcibios_fixup_bus(struct pci_bus *bus)
{
- /* When called from the generic PCI probe, read PCI<->PCI bridge
- * bases. This is -not- called when generating the PCI tree from
- * the OF device-tree.
- */
- if (bus->self != NULL)
- pci_read_bridge_bases(bus);
-
- /* Now fixup the bus bus */
- pcibios_setup_bus_self(bus);
-
- /* Now fixup devices on that bus */
- pcibios_setup_bus_devices(bus);
+ /* nothing to do */
}
EXPORT_SYMBOL(pcibios_fixup_bus);
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
- return 0;
-}
-
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
- struct pci_dev *dev = data;
- resource_size_t start = res->start;
-
- if (res->flags & IORESOURCE_IO) {
- if (skip_isa_ioresource_align(dev))
- return start;
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
- }
-
- return start;
+ return res->start;
}
EXPORT_SYMBOL(pcibios_align_resource);
+int pcibios_add_device(struct pci_dev *dev)
+{
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
/*
* Reparent resource children of pr that conflict with res
* under res, and make res replace those children.
(unsigned long)hose->io_base_virt - _IO_BASE);
}
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
- struct pci_controller *hose = bus->sysdata;
-
- return of_node_get(hose->dn);
-}
-
static void pcibios_scan_phb(struct pci_controller *hose)
{
LIST_HEAD(resources);
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
config RAPIDIO
tristate "RapidIO support"
depends on PCI
#include <linux/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>
-#include <asm-generic/pci-bridge.h>
struct pci_dev;
#endif /* __KERNEL__ */
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
static void pci_fixup_radeon(struct pci_dev *pdev)
{
- if (pdev->resource[PCI_ROM_RESOURCE].start)
+ struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
+
+ if (res->start)
return;
if (!loongson_sysconf.vgabios_addr)
return;
- pdev->resource[PCI_ROM_RESOURCE].start =
- loongson_sysconf.vgabios_addr;
- pdev->resource[PCI_ROM_RESOURCE].end =
- loongson_sysconf.vgabios_addr + 256*1024 - 1;
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_COPY;
+ pci_disable_rom(pdev);
+ if (res->parent)
+ release_resource(res);
+
+ res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
+ res->end = res->start + 256*1024 - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
- PCI_ROM_RESOURCE, &pdev->resource[PCI_ROM_RESOURCE]);
+ PCI_ROM_RESOURCE, res);
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
#endif /* __KERNEL__ */
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
#define PCIBIOS_MIN_IO 0x10
#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */
-/* export the pci_ DMA API in terms of the dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
select PPC_INDIRECT_PCI
default y
-source "drivers/pci/pcie/Kconfig"
-
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
config HAS_RAPIDIO
bool
default n
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
-#include <asm-generic/pci-bridge.h>
struct device_node;
#include <asm/prom.h>
#include <asm/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
-
/* Return values for pci_controller_ops.probe_mode function */
#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
PCI devices.
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
endif # PCI
#include <linux/pci.h>
#include <linux/mutex.h>
#include <asm-generic/pci.h>
-#include <asm-generic/pci-dma-compat.h>
#include <asm/pci_clp.h>
#include <asm/pci_debug.h>
config PCI_DOMAINS
bool
-source "drivers/pci/pcie/Kconfig"
-
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
endmenu
menu "Executable file formats"
return channel ? 15 : 14;
}
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PCI_H */
#else
#include <asm/pci_32.h>
#endif
-
-#include <asm-generic/pci-dma-compat.h>
-
#endif
source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-
config TILE_USB
tristate "Tilera USB host adapter support"
default y
Provides USB host adapter support for the built-in EHCI and OHCI
interfaces on TILE-Gx chips.
-source "drivers/pci/hotplug/Kconfig"
-
endmenu
menu "Executable file formats"
/* Use any cpu for PCI. */
#define cpumask_of_pcibus(bus) cpu_online_mask
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
#endif /* _ASM_TILE_PCI_H */
#define __UNICORE_PCI_H__
#ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
#include <asm-generic/pci.h>
#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
enum pci_mmap_state mmap_state, int write_combine);
#endif /* __KERNEL__ */
-
#endif
#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */
#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE)
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define HAVE_ARCH_PCI_SET_DMA_MASK
-
#define pcibios_assign_all_busses() 1
#endif /* __MACH_PUV3_HARDWARE_H__ */
You should say N unless you know you need this.
-source "drivers/pci/pcie/Kconfig"
-
source "drivers/pci/Kconfig"
# x86_64 have no ISA slots, but can have ISA-style DMA.
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
config RAPIDIO
tristate "RapidIO support"
depends on PCI
#ifdef CONFIG_X86_64
void *iommu; /* IOMMU private data */
#endif
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+ void *fwnode; /* IRQ domain for MSI assignment */
+#endif
};
extern int pci_routeirq;
static inline int pci_domain_nr(struct pci_bus *bus)
{
struct pci_sysdata *sd = bus->sysdata;
+
return sd->domain;
}
}
#endif
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
+{
+ struct pci_sysdata *sd = bus->sysdata;
+
+ return sd->fwnode;
+}
+
+#define pci_root_bus_fwnode _pci_root_bus_fwnode
+#endif
+
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
#include <asm/pci_64.h>
#endif
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
/* generic pci stuff */
#include <asm-generic/pci.h>
#include <linux/dmi.h>
#include <linux/slab.h>
-#include <asm-generic/pci-bridge.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
+ * card will have its BIOS copied to 0xC0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. Before marking the device
* with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
+ * by either arch code or vga-arbitration; if so only apply the fixup to this
+ * already-determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
+ struct resource *res;
/* Is VGA routed to us? */
bus = pdev->bus;
if (!vga_default_device() || pdev == vga_default_device()) {
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
+ res = &pdev->resource[PCI_ROM_RESOURCE];
+
+ pci_disable_rom(pdev);
+ if (res->parent)
+ release_resource(res);
+
+ res->start = 0xC0000;
+ res->end = res->start + 0x20000 - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_PCI_FIXED;
+ dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
+ res);
}
}
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+
+static void pci_bdwep_bar(struct pci_dev *dev)
+{
+ dev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
.write = vmd_pci_write,
};
+static void vmd_attach_resources(struct vmd_dev *vmd)
+{
+ vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
+ vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
+}
+
+static void vmd_detach_resources(struct vmd_dev *vmd)
+{
+ vmd->dev->resource[VMD_MEMBAR1].child = NULL;
+ vmd->dev->resource[VMD_MEMBAR2].child = NULL;
+}
+
/*
* VMD domains start at 0x1000 to not clash with ACPI _SEG domains.
*/
res = &vmd->dev->resource[VMD_CFGBAR];
vmd->resources[0] = (struct resource) {
.name = "VMD CFGBAR",
- .start = res->start,
+ .start = 0,
.end = (resource_size(res) >> 20) - 1,
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
+ /*
+ * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
+ * put 32-bit resources in the window.
+ *
+ * There's no hardware reason why a 64-bit window *couldn't*
+ * contain a 32-bit resource, but pbus_size_mem() computes the
+ * bridge window size assuming a 64-bit window will contain no
+ * 32-bit resources. __pci_assign_resource() enforces that
+ * artificial restriction to make sure everything will fit.
+ *
+ * The only way we could use a 64-bit non-prefechable MEMBAR is
+ * if its address is <4GB so that we can convert it to a 32-bit
+ * resource. To be visible to the host OS, all VMD endpoints must
+ * be initially configured by platform BIOS, which includes setting
+ * up these resources. We can assume the device is configured
+ * according to the platform needs.
+ */
res = &vmd->dev->resource[VMD_MEMBAR1];
upper_bits = upper_32_bits(res->end);
flags = res->flags & ~IORESOURCE_SIZEALIGN;
.start = res->start,
.end = res->end,
.flags = flags,
+ .parent = res,
};
res = &vmd->dev->resource[VMD_MEMBAR2];
.start = res->start + 0x2000,
.end = res->end,
.flags = flags,
+ .parent = res,
};
sd->domain = vmd_find_free_domain();
return -ENODEV;
}
+ vmd_attach_resources(vmd);
vmd_setup_dma_ops(vmd);
dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
pci_rescan_bus(vmd->bus);
{
struct vmd_dev *vmd = pci_get_drvdata(dev);
+ vmd_detach_resources(vmd);
pci_set_drvdata(dev, NULL);
sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
pci_stop_root_bus(vmd->bus);
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
config PLATFORM_WANT_DEFAULT_MEM
def_bool n
#endif /* __KERNEL__ */
-/* Implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
/* Generic PCI */
#include <asm-generic/pci.h>
#include <linux/scatterlist.h>
#include <linux/of.h>
#include <linux/gfp.h>
+#include <linux/pci.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <asm/macio.h>
#include <asm/io.h>
#include <asm/dbdma.h>
-#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/mediabay.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <asm/uninorth.h>
-#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/pmac_feature.h>
#include "agp.h"
{
.vendor = 0x1234,
.device = 0x1111,
- .subvendor = 0x1af4,
- .subdevice = 0x1100,
+ .subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
+ .subdevice = PCI_SUBDEVICE_ID_QEMU,
.driver_data = BOCHS_QEMU_STDVGA,
},
{
/* only bind to the cirrus chip in qemu */
static const struct pci_device_id pciidlist[] = {
- { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, 0x1af4, 0x1100, 0,
- 0, 0 },
+ { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446,
+ PCI_SUBVENDOR_ID_REDHAT_QUMRANET, PCI_SUBDEVICE_ID_QEMU,
+ 0, 0, 0 },
{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, PCI_VENDOR_ID_XEN,
0x0001, 0, 0, 0 },
{0,}
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#endif /* CONFIG_PPC_PMAC */
/* from radeon_legacy_encoder.c */
#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#endif
#define DRV_NAME "pdc202xx_new"
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/ide.h>
-#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/macio.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#undef DEBUG
#include <linux/delay.h>
#include <asm/opal.h>
#include <asm/msi_bitmap.h>
-#include <asm/pci-bridge.h> /* for struct pci_controller */
#include <asm/pnv-pci.h>
#include <asm/io.h>
#endif
#ifdef CONFIG_PPC_PMAC
-#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
-#include <asm/pci-bridge.h>
#include <net/checksum.h>
#include "spider_net.h"
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
-#include <asm-generic/pci-bridge.h>
static inline int __of_pci_pci_compare(struct device_node *node,
unsigned int data)
source "drivers/pcmcia/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
-
endmenu
menu "PA-RISC specific drivers"
#
# PCI configuration
#
+
+source "drivers/pci/pcie/Kconfig"
+
config PCI_BUS_ADDR_T_64BIT
def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
depends on PCI
def_bool y if (DMI || ACPI)
select NLS
+config PCI_HYPERV
+ tristate "Hyper-V PCI Frontend"
+ depends on PCI && X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
+ help
+ The PCI device frontend driver allows the kernel to import arbitrary
+ PCI devices from a PCI backend to support PCI driver domains.
+
source "drivers/pci/host/Kconfig"
# Some architectures use the generic PCI setup functions
#
obj-$(CONFIG_ALPHA) += setup-irq.o
+obj-$(CONFIG_ARC) += setup-irq.o
obj-$(CONFIG_ARM) += setup-irq.o
obj-$(CONFIG_ARM64) += setup-irq.o
obj-$(CONFIG_UNICORE32) += setup-irq.o
}
EXPORT_SYMBOL(pci_bus_set_ops);
-/**
- * pci_read_vpd - Read one entry from Vital Product Data
- * @dev: pci device struct
- * @pos: offset in vpd space
- * @count: number of bytes to read
- * @buf: pointer to where to store result
- *
- */
-ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
-{
- if (!dev->vpd || !dev->vpd->ops)
- return -ENODEV;
- return dev->vpd->ops->read(dev, pos, count, buf);
-}
-EXPORT_SYMBOL(pci_read_vpd);
-
-/**
- * pci_write_vpd - Write entry to Vital Product Data
- * @dev: pci device struct
- * @pos: offset in vpd space
- * @count: number of bytes to write
- * @buf: buffer containing write data
- *
- */
-ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
-{
- if (!dev->vpd || !dev->vpd->ops)
- return -ENODEV;
- return dev->vpd->ops->write(dev, pos, count, buf);
-}
-EXPORT_SYMBOL(pci_write_vpd);
-
/*
* The following routines are to prevent the user from accessing PCI config
* space when it's unsafe to do so. Some devices require this during BIST and
/* VPD access through PCI 2.2+ VPD capability */
-#define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1)
+/**
+ * pci_read_vpd - Read one entry from Vital Product Data
+ * @dev: pci device struct
+ * @pos: offset in vpd space
+ * @count: number of bytes to read
+ * @buf: pointer to where to store result
+ */
+ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
+{
+ if (!dev->vpd || !dev->vpd->ops)
+ return -ENODEV;
+ return dev->vpd->ops->read(dev, pos, count, buf);
+}
+EXPORT_SYMBOL(pci_read_vpd);
-struct pci_vpd_pci22 {
- struct pci_vpd base;
- struct mutex lock;
- u16 flag;
- bool busy;
- u8 cap;
-};
+/**
+ * pci_write_vpd - Write entry to Vital Product Data
+ * @dev: pci device struct
+ * @pos: offset in vpd space
+ * @count: number of bytes to write
+ * @buf: buffer containing write data
+ */
+ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
+{
+ if (!dev->vpd || !dev->vpd->ops)
+ return -ENODEV;
+ return dev->vpd->ops->write(dev, pos, count, buf);
+}
+EXPORT_SYMBOL(pci_write_vpd);
+
+#define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
+
+/**
+ * pci_vpd_size - determine actual size of Vital Product Data
+ * @dev: pci device struct
+ * @old_size: current assumed size, also maximum allowed size
+ */
+static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size)
+{
+ size_t off = 0;
+ unsigned char header[1+2]; /* 1 byte tag, 2 bytes length */
+
+ while (off < old_size &&
+ pci_read_vpd(dev, off, 1, header) == 1) {
+ unsigned char tag;
+
+ if (header[0] & PCI_VPD_LRDT) {
+ /* Large Resource Data Type Tag */
+ tag = pci_vpd_lrdt_tag(header);
+ /* Only read length from known tag items */
+ if ((tag == PCI_VPD_LTIN_ID_STRING) ||
+ (tag == PCI_VPD_LTIN_RO_DATA) ||
+ (tag == PCI_VPD_LTIN_RW_DATA)) {
+ if (pci_read_vpd(dev, off+1, 2,
+ &header[1]) != 2) {
+ dev_warn(&dev->dev,
+ "invalid large VPD tag %02x size at offset %zu",
+ tag, off + 1);
+ return 0;
+ }
+ off += PCI_VPD_LRDT_TAG_SIZE +
+ pci_vpd_lrdt_size(header);
+ }
+ } else {
+ /* Short Resource Data Type Tag */
+ off += PCI_VPD_SRDT_TAG_SIZE +
+ pci_vpd_srdt_size(header);
+ tag = pci_vpd_srdt_tag(header);
+ }
+
+ if (tag == PCI_VPD_STIN_END) /* End tag descriptor */
+ return off;
+
+ if ((tag != PCI_VPD_LTIN_ID_STRING) &&
+ (tag != PCI_VPD_LTIN_RO_DATA) &&
+ (tag != PCI_VPD_LTIN_RW_DATA)) {
+ dev_warn(&dev->dev,
+ "invalid %s VPD tag %02x at offset %zu",
+ (header[0] & PCI_VPD_LRDT) ? "large" : "short",
+ tag, off);
+ return 0;
+ }
+ }
+ return 0;
+}
/*
* Wait for last operation to complete.
*
* Returns 0 on success, negative values indicate error.
*/
-static int pci_vpd_pci22_wait(struct pci_dev *dev)
+static int pci_vpd_wait(struct pci_dev *dev)
{
- struct pci_vpd_pci22 *vpd =
- container_of(dev->vpd, struct pci_vpd_pci22, base);
- unsigned long timeout = jiffies + HZ/20 + 2;
+ struct pci_vpd *vpd = dev->vpd;
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+ unsigned long max_sleep = 16;
u16 status;
int ret;
if (!vpd->busy)
return 0;
- for (;;) {
+ while (time_before(jiffies, timeout)) {
ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
&status);
if (ret < 0)
return ret;
if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
- vpd->busy = false;
+ vpd->busy = 0;
return 0;
}
- if (time_after(jiffies, timeout)) {
- dev_printk(KERN_DEBUG, &dev->dev, "vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
- return -ETIMEDOUT;
- }
if (fatal_signal_pending(current))
return -EINTR;
- if (!cond_resched())
- udelay(10);
+
+ usleep_range(10, max_sleep);
+ if (max_sleep < 1024)
+ max_sleep *= 2;
}
+
+ dev_warn(&dev->dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
+ return -ETIMEDOUT;
}
-static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
- void *arg)
+static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
+ void *arg)
{
- struct pci_vpd_pci22 *vpd =
- container_of(dev->vpd, struct pci_vpd_pci22, base);
+ struct pci_vpd *vpd = dev->vpd;
int ret;
loff_t end = pos + count;
u8 *buf = arg;
- if (pos < 0 || pos > vpd->base.len || end > vpd->base.len)
+ if (pos < 0)
return -EINVAL;
+ if (!vpd->valid) {
+ vpd->valid = 1;
+ vpd->len = pci_vpd_size(dev, vpd->len);
+ }
+
+ if (vpd->len == 0)
+ return -EIO;
+
+ if (pos > vpd->len)
+ return 0;
+
+ if (end > vpd->len) {
+ end = vpd->len;
+ count = end - pos;
+ }
+
if (mutex_lock_killable(&vpd->lock))
return -EINTR;
- ret = pci_vpd_pci22_wait(dev);
+ ret = pci_vpd_wait(dev);
if (ret < 0)
goto out;
pos & ~3);
if (ret < 0)
break;
- vpd->busy = true;
+ vpd->busy = 1;
vpd->flag = PCI_VPD_ADDR_F;
- ret = pci_vpd_pci22_wait(dev);
+ ret = pci_vpd_wait(dev);
if (ret < 0)
break;
return ret ? ret : count;
}
-static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count,
- const void *arg)
+static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
+ const void *arg)
{
- struct pci_vpd_pci22 *vpd =
- container_of(dev->vpd, struct pci_vpd_pci22, base);
+ struct pci_vpd *vpd = dev->vpd;
const u8 *buf = arg;
loff_t end = pos + count;
int ret = 0;
- if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len)
+ if (pos < 0 || (pos & 3) || (count & 3))
+ return -EINVAL;
+
+ if (!vpd->valid) {
+ vpd->valid = 1;
+ vpd->len = pci_vpd_size(dev, vpd->len);
+ }
+
+ if (vpd->len == 0)
+ return -EIO;
+
+ if (end > vpd->len)
return -EINVAL;
if (mutex_lock_killable(&vpd->lock))
return -EINTR;
- ret = pci_vpd_pci22_wait(dev);
+ ret = pci_vpd_wait(dev);
if (ret < 0)
goto out;
if (ret < 0)
break;
- vpd->busy = true;
+ vpd->busy = 1;
vpd->flag = 0;
- ret = pci_vpd_pci22_wait(dev);
+ ret = pci_vpd_wait(dev);
if (ret < 0)
break;
return ret ? ret : count;
}
-static void pci_vpd_pci22_release(struct pci_dev *dev)
-{
- kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
-}
-
-static const struct pci_vpd_ops pci_vpd_pci22_ops = {
- .read = pci_vpd_pci22_read,
- .write = pci_vpd_pci22_write,
- .release = pci_vpd_pci22_release,
+static const struct pci_vpd_ops pci_vpd_ops = {
+ .read = pci_vpd_read,
+ .write = pci_vpd_write,
};
static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
static const struct pci_vpd_ops pci_vpd_f0_ops = {
.read = pci_vpd_f0_read,
.write = pci_vpd_f0_write,
- .release = pci_vpd_pci22_release,
};
-int pci_vpd_pci22_init(struct pci_dev *dev)
+int pci_vpd_init(struct pci_dev *dev)
{
- struct pci_vpd_pci22 *vpd;
+ struct pci_vpd *vpd;
u8 cap;
cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
if (!vpd)
return -ENOMEM;
- vpd->base.len = PCI_VPD_PCI22_SIZE;
+ vpd->len = PCI_VPD_MAX_SIZE;
if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0)
- vpd->base.ops = &pci_vpd_f0_ops;
+ vpd->ops = &pci_vpd_f0_ops;
else
- vpd->base.ops = &pci_vpd_pci22_ops;
+ vpd->ops = &pci_vpd_ops;
mutex_init(&vpd->lock);
vpd->cap = cap;
- vpd->busy = false;
- dev->vpd = &vpd->base;
+ vpd->busy = 0;
+ vpd->valid = 0;
+ dev->vpd = vpd;
return 0;
}
+void pci_vpd_release(struct pci_dev *dev)
+{
+ kfree(dev->vpd);
+}
+
/**
* pci_cfg_access_lock - Lock PCI config reads/writes
* @dev: pci device struct
dev->match_driver = true;
retval = device_attach(&dev->dev);
- WARN_ON(retval < 0);
+ if (retval < 0) {
+ dev_warn(&dev->dev, "device attach failed (%d)\n", retval);
+ pci_proc_detach_device(dev);
+ pci_remove_sysfs_dev_files(dev);
+ return;
+ }
dev->is_added = 1;
}
depends on ARM
depends on OF
+
+config PCIE_XILINX_NWL
+ bool "NWL PCIe Core"
+ depends on ARCH_ZYNQMP
+ select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+ help
+ Say 'Y' here if you want kernel support for Xilinx
+ NWL PCIe controller. The controller can act as Root Port
+ or End Point. The current option selection will only
+ support root port enabling.
+
+config PCIE_DW_PLAT
+ bool "Platform bus based DesignWare PCIe Controller"
+ select PCIE_DW
+ ---help---
+ This selects the DesignWare PCIe controller support. Select this if
+ you have a PCIe controller on Platform bus.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config PCIE_DW
bool
config PCI_RCAR_GEN2
bool "Renesas R-Car Gen2 Internal PCI controller"
depends on ARM
- depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on ARCH_RENESAS || COMPILE_TEST
help
Say Y here if you want internal PCI support on R-Car Gen2 SoC.
There are 3 internal PCI controllers available with a single
config PCI_RCAR_GEN2_PCIE
bool "Renesas R-Car PCIe controller"
- depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
+ depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
help
Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
+config PCI_HOST_COMMON
+ bool
+
config PCI_HOST_GENERIC
bool "Generic PCI host controller"
depends on (ARM || ARM64) && OF
+ select PCI_HOST_COMMON
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
config PCIE_XILINX
bool "Xilinx AXI PCIe host bridge support"
- depends on ARCH_ZYNQ
+ depends on ARCH_ZYNQ || MICROBLAZE
help
Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
Host Bridge driver.
PCIe controller uses the Designware core plus Qualcomm-specific
hardware wrappers.
+config PCI_HOST_THUNDER_PEM
+ bool "Cavium Thunder PCIe controller to off-chip devices"
+ depends on OF && ARM64
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
+
+config PCI_HOST_THUNDER_ECAM
+ bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
+ depends on OF && ARM64
+ select PCI_HOST_COMMON
+ help
+ Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
+
endmenu
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
+obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
+obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
+obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
+obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
+obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
* published by the Free Software Foundation.
*/
-#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
{
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
u32 reg;
- unsigned int retries;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "link is already up\n");
reg |= LTSSM_EN;
dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
- for (retries = 0; retries < 1000; retries++) {
- if (dw_pcie_link_up(pp))
- return 0;
- usleep_range(10, 20);
- }
-
- dev_err(pp->dev, "link is not up\n");
- return -EINVAL;
+ return dw_pcie_wait_for_link(pp);
}
static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
{
struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
u32 val;
- unsigned int retries;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "Link already up\n");
PCIE_APP_LTSSM_ENABLE);
/* check if the link is up or not */
- for (retries = 0; retries < 10; retries++) {
- if (dw_pcie_link_up(pp)) {
- dev_info(pp->dev, "Link up\n");
- return 0;
- }
- mdelay(100);
- }
+ if (!dw_pcie_wait_for_link(pp))
+ return 0;
while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) {
val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED);
/* power off phy */
exynos_pcie_power_off_phy(pp);
- dev_err(pp->dev, "PCIe Link Fail\n");
- return -EINVAL;
+ return -ETIMEDOUT;
}
static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp)
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2014 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
+{
+ pci_free_resource_list(&pci->resources);
+}
+
+static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
+{
+ int err, res_valid = 0;
+ struct device *dev = pci->host.dev.parent;
+ struct device_node *np = dev->of_node;
+ resource_size_t iobase;
+ struct resource_entry *win;
+
+ err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
+ &iobase);
+ if (err)
+ return err;
+
+ resource_list_for_each_entry(win, &pci->resources) {
+ struct resource *parent, *res = win->res;
+
+ switch (resource_type(res)) {
+ case IORESOURCE_IO:
+ parent = &ioport_resource;
+ err = pci_remap_iospace(res, iobase);
+ if (err) {
+ dev_warn(dev, "error %d: failed to map resource %pR\n",
+ err, res);
+ continue;
+ }
+ break;
+ case IORESOURCE_MEM:
+ parent = &iomem_resource;
+ res_valid |= !(res->flags & IORESOURCE_PREFETCH);
+ break;
+ case IORESOURCE_BUS:
+ pci->cfg.bus_range = res;
+ default:
+ continue;
+ }
+
+ err = devm_request_resource(dev, parent, res);
+ if (err)
+ goto out_release_res;
+ }
+
+ if (!res_valid) {
+ dev_err(dev, "non-prefetchable memory resource required\n");
+ err = -EINVAL;
+ goto out_release_res;
+ }
+
+ return 0;
+
+out_release_res:
+ gen_pci_release_of_pci_ranges(pci);
+ return err;
+}
+
+static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
+{
+ int err;
+ u8 bus_max;
+ resource_size_t busn;
+ struct resource *bus_range;
+ struct device *dev = pci->host.dev.parent;
+ struct device_node *np = dev->of_node;
+ u32 sz = 1 << pci->cfg.ops->bus_shift;
+
+ err = of_address_to_resource(np, 0, &pci->cfg.res);
+ if (err) {
+ dev_err(dev, "missing \"reg\" property\n");
+ return err;
+ }
+
+ /* Limit the bus-range to fit within reg */
+ bus_max = pci->cfg.bus_range->start +
+ (resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
+ pci->cfg.bus_range->end = min_t(resource_size_t,
+ pci->cfg.bus_range->end, bus_max);
+
+ pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
+ sizeof(*pci->cfg.win), GFP_KERNEL);
+ if (!pci->cfg.win)
+ return -ENOMEM;
+
+ /* Map our Configuration Space windows */
+ if (!devm_request_mem_region(dev, pci->cfg.res.start,
+ resource_size(&pci->cfg.res),
+ "Configuration Space"))
+ return -ENOMEM;
+
+ bus_range = pci->cfg.bus_range;
+ for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
+ u32 idx = busn - bus_range->start;
+
+ pci->cfg.win[idx] = devm_ioremap(dev,
+ pci->cfg.res.start + idx * sz,
+ sz);
+ if (!pci->cfg.win[idx])
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int pci_host_common_probe(struct platform_device *pdev,
+ struct gen_pci *pci)
+{
+ int err;
+ const char *type;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct pci_bus *bus, *child;
+
+ type = of_get_property(np, "device_type", NULL);
+ if (!type || strcmp(type, "pci")) {
+ dev_err(dev, "invalid \"device_type\" %s\n", type);
+ return -EINVAL;
+ }
+
+ of_pci_check_probe_only();
+
+ pci->host.dev.parent = dev;
+ INIT_LIST_HEAD(&pci->host.windows);
+ INIT_LIST_HEAD(&pci->resources);
+
+ /* Parse our PCI ranges and request their resources */
+ err = gen_pci_parse_request_of_pci_ranges(pci);
+ if (err)
+ return err;
+
+ /* Parse and map our Configuration Space windows */
+ err = gen_pci_parse_map_cfg_windows(pci);
+ if (err) {
+ gen_pci_release_of_pci_ranges(pci);
+ return err;
+ }
+
+ /* Do not reassign resources if probe only */
+ if (!pci_has_flag(PCI_PROBE_ONLY))
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
+
+
+ bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
+ &pci->cfg.ops->ops, pci, &pci->resources);
+ if (!bus) {
+ dev_err(dev, "Scanning rootbus failed");
+ return -ENODEV;
+ }
+
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+
+ if (!pci_has_flag(PCI_PROBE_ONLY)) {
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
+
+ pci_bus_add_devices(bus);
+ return 0;
+}
+
+MODULE_DESCRIPTION("Generic PCI host driver common code");
+MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2014 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#ifndef _PCI_HOST_COMMON_H
+#define _PCI_HOST_COMMON_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+struct gen_pci_cfg_bus_ops {
+ u32 bus_shift;
+ struct pci_ops ops;
+};
+
+struct gen_pci_cfg_windows {
+ struct resource res;
+ struct resource *bus_range;
+ void __iomem **win;
+
+ struct gen_pci_cfg_bus_ops *ops;
+};
+
+struct gen_pci {
+ struct pci_host_bridge host;
+ struct gen_pci_cfg_windows cfg;
+ struct list_head resources;
+};
+
+int pci_host_common_probe(struct platform_device *pdev,
+ struct gen_pci *pci);
+
+#endif /* _PCI_HOST_COMMON_H */
#include <linux/of_pci.h>
#include <linux/platform_device.h>
-struct gen_pci_cfg_bus_ops {
- u32 bus_shift;
- struct pci_ops ops;
-};
-
-struct gen_pci_cfg_windows {
- struct resource res;
- struct resource *bus_range;
- void __iomem **win;
-
- struct gen_pci_cfg_bus_ops *ops;
-};
-
-struct gen_pci {
- struct pci_host_bridge host;
- struct gen_pci_cfg_windows cfg;
- struct list_head resources;
-};
+#include "pci-host-common.h"
static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
unsigned int devfn,
};
MODULE_DEVICE_TABLE(of, gen_pci_of_match);
-static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
-{
- pci_free_resource_list(&pci->resources);
-}
-
-static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
-{
- int err, res_valid = 0;
- struct device *dev = pci->host.dev.parent;
- struct device_node *np = dev->of_node;
- resource_size_t iobase;
- struct resource_entry *win;
-
- err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
- &iobase);
- if (err)
- return err;
-
- resource_list_for_each_entry(win, &pci->resources) {
- struct resource *parent, *res = win->res;
-
- switch (resource_type(res)) {
- case IORESOURCE_IO:
- parent = &ioport_resource;
- err = pci_remap_iospace(res, iobase);
- if (err) {
- dev_warn(dev, "error %d: failed to map resource %pR\n",
- err, res);
- continue;
- }
- break;
- case IORESOURCE_MEM:
- parent = &iomem_resource;
- res_valid |= !(res->flags & IORESOURCE_PREFETCH);
- break;
- case IORESOURCE_BUS:
- pci->cfg.bus_range = res;
- default:
- continue;
- }
-
- err = devm_request_resource(dev, parent, res);
- if (err)
- goto out_release_res;
- }
-
- if (!res_valid) {
- dev_err(dev, "non-prefetchable memory resource required\n");
- err = -EINVAL;
- goto out_release_res;
- }
-
- return 0;
-
-out_release_res:
- gen_pci_release_of_pci_ranges(pci);
- return err;
-}
-
-static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
-{
- int err;
- u8 bus_max;
- resource_size_t busn;
- struct resource *bus_range;
- struct device *dev = pci->host.dev.parent;
- struct device_node *np = dev->of_node;
- u32 sz = 1 << pci->cfg.ops->bus_shift;
-
- err = of_address_to_resource(np, 0, &pci->cfg.res);
- if (err) {
- dev_err(dev, "missing \"reg\" property\n");
- return err;
- }
-
- /* Limit the bus-range to fit within reg */
- bus_max = pci->cfg.bus_range->start +
- (resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
- pci->cfg.bus_range->end = min_t(resource_size_t,
- pci->cfg.bus_range->end, bus_max);
-
- pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
- sizeof(*pci->cfg.win), GFP_KERNEL);
- if (!pci->cfg.win)
- return -ENOMEM;
-
- /* Map our Configuration Space windows */
- if (!devm_request_mem_region(dev, pci->cfg.res.start,
- resource_size(&pci->cfg.res),
- "Configuration Space"))
- return -ENOMEM;
-
- bus_range = pci->cfg.bus_range;
- for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
- u32 idx = busn - bus_range->start;
-
- pci->cfg.win[idx] = devm_ioremap(dev,
- pci->cfg.res.start + idx * sz,
- sz);
- if (!pci->cfg.win[idx])
- return -ENOMEM;
- }
-
- return 0;
-}
-
static int gen_pci_probe(struct platform_device *pdev)
{
- int err;
- const char *type;
- const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id;
struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
- struct pci_bus *bus, *child;
if (!pci)
return -ENOMEM;
- type = of_get_property(np, "device_type", NULL);
- if (!type || strcmp(type, "pci")) {
- dev_err(dev, "invalid \"device_type\" %s\n", type);
- return -EINVAL;
- }
-
- of_pci_check_probe_only();
-
- of_id = of_match_node(gen_pci_of_match, np);
+ of_id = of_match_node(gen_pci_of_match, dev->of_node);
pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
- pci->host.dev.parent = dev;
- INIT_LIST_HEAD(&pci->host.windows);
- INIT_LIST_HEAD(&pci->resources);
-
- /* Parse our PCI ranges and request their resources */
- err = gen_pci_parse_request_of_pci_ranges(pci);
- if (err)
- return err;
-
- /* Parse and map our Configuration Space windows */
- err = gen_pci_parse_map_cfg_windows(pci);
- if (err) {
- gen_pci_release_of_pci_ranges(pci);
- return err;
- }
-
- /* Do not reassign resources if probe only */
- if (!pci_has_flag(PCI_PROBE_ONLY))
- pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
-
-
- bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
- &pci->cfg.ops->ops, pci, &pci->resources);
- if (!bus) {
- dev_err(dev, "Scanning rootbus failed");
- return -ENODEV;
- }
-
- pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
-
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
-
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
- }
- pci_bus_add_devices(bus);
- return 0;
+ return pci_host_common_probe(pdev, pci);
}
static struct platform_driver gen_pci_driver = {
--- /dev/null
+/*
+ * Copyright (c) Microsoft Corporation.
+ *
+ * Author:
+ * Jake Oshins <jakeo@microsoft.com>
+ *
+ * This driver acts as a paravirtual front-end for PCI Express root buses.
+ * When a PCI Express function (either an entire device or an SR-IOV
+ * Virtual Function) is being passed through to the VM, this driver exposes
+ * a new bus to the guest VM. This is modeled as a root PCI bus because
+ * no bridges are being exposed to the VM. In fact, with a "Generation 2"
+ * VM within Hyper-V, there may seem to be no PCI bus at all in the VM
+ * until a device as been exposed using this driver.
+ *
+ * Each root PCI bus has its own PCI domain, which is called "Segment" in
+ * the PCI Firmware Specifications. Thus while each device passed through
+ * to the VM using this front-end will appear at "device 0", the domain will
+ * be unique. Typically, each bus will have one PCI function on it, though
+ * this driver does support more than one.
+ *
+ * In order to map the interrupts from the device through to the guest VM,
+ * this driver also implements an IRQ Domain, which handles interrupts (either
+ * MSI or MSI-X) associated with the functions on the bus. As interrupts are
+ * set up, torn down, or reaffined, this driver communicates with the
+ * underlying hypervisor to adjust the mappings in the I/O MMU so that each
+ * interrupt will be delivered to the correct virtual processor at the right
+ * vector. This driver does not support level-triggered (line-based)
+ * interrupts, and will report that the Interrupt Line register in the
+ * function's configuration space is zero.
+ *
+ * The rest of this driver mostly maps PCI concepts onto underlying Hyper-V
+ * facilities. For instance, the configuration space of a function exposed
+ * by Hyper-V is mapped into a single page of memory space, and the
+ * read and write handlers for config space must be aware of this mechanism.
+ * Similarly, device setup and teardown involves messages sent to and from
+ * the PCI back-end driver in Hyper-V.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/semaphore.h>
+#include <linux/irqdomain.h>
+#include <asm/irqdomain.h>
+#include <asm/apic.h>
+#include <linux/msi.h>
+#include <linux/hyperv.h>
+#include <asm/mshyperv.h>
+
+/*
+ * Protocol versions. The low word is the minor version, the high word the
+ * major version.
+ */
+
+#define PCI_MAKE_VERSION(major, minor) ((u32)(((major) << 16) | (major)))
+#define PCI_MAJOR_VERSION(version) ((u32)(version) >> 16)
+#define PCI_MINOR_VERSION(version) ((u32)(version) & 0xff)
+
+enum {
+ PCI_PROTOCOL_VERSION_1_1 = PCI_MAKE_VERSION(1, 1),
+ PCI_PROTOCOL_VERSION_CURRENT = PCI_PROTOCOL_VERSION_1_1
+};
+
+#define PCI_CONFIG_MMIO_LENGTH 0x2000
+#define CFG_PAGE_OFFSET 0x1000
+#define CFG_PAGE_SIZE (PCI_CONFIG_MMIO_LENGTH - CFG_PAGE_OFFSET)
+
+#define MAX_SUPPORTED_MSI_MESSAGES 0x400
+
+/*
+ * Message Types
+ */
+
+enum pci_message_type {
+ /*
+ * Version 1.1
+ */
+ PCI_MESSAGE_BASE = 0x42490000,
+ PCI_BUS_RELATIONS = PCI_MESSAGE_BASE + 0,
+ PCI_QUERY_BUS_RELATIONS = PCI_MESSAGE_BASE + 1,
+ PCI_POWER_STATE_CHANGE = PCI_MESSAGE_BASE + 4,
+ PCI_QUERY_RESOURCE_REQUIREMENTS = PCI_MESSAGE_BASE + 5,
+ PCI_QUERY_RESOURCE_RESOURCES = PCI_MESSAGE_BASE + 6,
+ PCI_BUS_D0ENTRY = PCI_MESSAGE_BASE + 7,
+ PCI_BUS_D0EXIT = PCI_MESSAGE_BASE + 8,
+ PCI_READ_BLOCK = PCI_MESSAGE_BASE + 9,
+ PCI_WRITE_BLOCK = PCI_MESSAGE_BASE + 0xA,
+ PCI_EJECT = PCI_MESSAGE_BASE + 0xB,
+ PCI_QUERY_STOP = PCI_MESSAGE_BASE + 0xC,
+ PCI_REENABLE = PCI_MESSAGE_BASE + 0xD,
+ PCI_QUERY_STOP_FAILED = PCI_MESSAGE_BASE + 0xE,
+ PCI_EJECTION_COMPLETE = PCI_MESSAGE_BASE + 0xF,
+ PCI_RESOURCES_ASSIGNED = PCI_MESSAGE_BASE + 0x10,
+ PCI_RESOURCES_RELEASED = PCI_MESSAGE_BASE + 0x11,
+ PCI_INVALIDATE_BLOCK = PCI_MESSAGE_BASE + 0x12,
+ PCI_QUERY_PROTOCOL_VERSION = PCI_MESSAGE_BASE + 0x13,
+ PCI_CREATE_INTERRUPT_MESSAGE = PCI_MESSAGE_BASE + 0x14,
+ PCI_DELETE_INTERRUPT_MESSAGE = PCI_MESSAGE_BASE + 0x15,
+ PCI_MESSAGE_MAXIMUM
+};
+
+/*
+ * Structures defining the virtual PCI Express protocol.
+ */
+
+union pci_version {
+ struct {
+ u16 minor_version;
+ u16 major_version;
+ } parts;
+ u32 version;
+} __packed;
+
+/*
+ * Function numbers are 8-bits wide on Express, as interpreted through ARI,
+ * which is all this driver does. This representation is the one used in
+ * Windows, which is what is expected when sending this back and forth with
+ * the Hyper-V parent partition.
+ */
+union win_slot_encoding {
+ struct {
+ u32 func:8;
+ u32 reserved:24;
+ } bits;
+ u32 slot;
+} __packed;
+
+/*
+ * Pretty much as defined in the PCI Specifications.
+ */
+struct pci_function_description {
+ u16 v_id; /* vendor ID */
+ u16 d_id; /* device ID */
+ u8 rev;
+ u8 prog_intf;
+ u8 subclass;
+ u8 base_class;
+ u32 subsystem_id;
+ union win_slot_encoding win_slot;
+ u32 ser; /* serial number */
+} __packed;
+
+/**
+ * struct hv_msi_desc
+ * @vector: IDT entry
+ * @delivery_mode: As defined in Intel's Programmer's
+ * Reference Manual, Volume 3, Chapter 8.
+ * @vector_count: Number of contiguous entries in the
+ * Interrupt Descriptor Table that are
+ * occupied by this Message-Signaled
+ * Interrupt. For "MSI", as first defined
+ * in PCI 2.2, this can be between 1 and
+ * 32. For "MSI-X," as first defined in PCI
+ * 3.0, this must be 1, as each MSI-X table
+ * entry would have its own descriptor.
+ * @reserved: Empty space
+ * @cpu_mask: All the target virtual processors.
+ */
+struct hv_msi_desc {
+ u8 vector;
+ u8 delivery_mode;
+ u16 vector_count;
+ u32 reserved;
+ u64 cpu_mask;
+} __packed;
+
+/**
+ * struct tran_int_desc
+ * @reserved: unused, padding
+ * @vector_count: same as in hv_msi_desc
+ * @data: This is the "data payload" value that is
+ * written by the device when it generates
+ * a message-signaled interrupt, either MSI
+ * or MSI-X.
+ * @address: This is the address to which the data
+ * payload is written on interrupt
+ * generation.
+ */
+struct tran_int_desc {
+ u16 reserved;
+ u16 vector_count;
+ u32 data;
+ u64 address;
+} __packed;
+
+/*
+ * A generic message format for virtual PCI.
+ * Specific message formats are defined later in the file.
+ */
+
+struct pci_message {
+ u32 message_type;
+} __packed;
+
+struct pci_child_message {
+ u32 message_type;
+ union win_slot_encoding wslot;
+} __packed;
+
+struct pci_incoming_message {
+ struct vmpacket_descriptor hdr;
+ struct pci_message message_type;
+} __packed;
+
+struct pci_response {
+ struct vmpacket_descriptor hdr;
+ s32 status; /* negative values are failures */
+} __packed;
+
+struct pci_packet {
+ void (*completion_func)(void *context, struct pci_response *resp,
+ int resp_packet_size);
+ void *compl_ctxt;
+ struct pci_message message;
+};
+
+/*
+ * Specific message types supporting the PCI protocol.
+ */
+
+/*
+ * Version negotiation message. Sent from the guest to the host.
+ * The guest is free to try different versions until the host
+ * accepts the version.
+ *
+ * pci_version: The protocol version requested.
+ * is_last_attempt: If TRUE, this is the last version guest will request.
+ * reservedz: Reserved field, set to zero.
+ */
+
+struct pci_version_request {
+ struct pci_message message_type;
+ enum pci_message_type protocol_version;
+} __packed;
+
+/*
+ * Bus D0 Entry. This is sent from the guest to the host when the virtual
+ * bus (PCI Express port) is ready for action.
+ */
+
+struct pci_bus_d0_entry {
+ struct pci_message message_type;
+ u32 reserved;
+ u64 mmio_base;
+} __packed;
+
+struct pci_bus_relations {
+ struct pci_incoming_message incoming;
+ u32 device_count;
+ struct pci_function_description func[1];
+} __packed;
+
+struct pci_q_res_req_response {
+ struct vmpacket_descriptor hdr;
+ s32 status; /* negative values are failures */
+ u32 probed_bar[6];
+} __packed;
+
+struct pci_set_power {
+ struct pci_message message_type;
+ union win_slot_encoding wslot;
+ u32 power_state; /* In Windows terms */
+ u32 reserved;
+} __packed;
+
+struct pci_set_power_response {
+ struct vmpacket_descriptor hdr;
+ s32 status; /* negative values are failures */
+ union win_slot_encoding wslot;
+ u32 resultant_state; /* In Windows terms */
+ u32 reserved;
+} __packed;
+
+struct pci_resources_assigned {
+ struct pci_message message_type;
+ union win_slot_encoding wslot;
+ u8 memory_range[0x14][6]; /* not used here */
+ u32 msi_descriptors;
+ u32 reserved[4];
+} __packed;
+
+struct pci_create_interrupt {
+ struct pci_message message_type;
+ union win_slot_encoding wslot;
+ struct hv_msi_desc int_desc;
+} __packed;
+
+struct pci_create_int_response {
+ struct pci_response response;
+ u32 reserved;
+ struct tran_int_desc int_desc;
+} __packed;
+
+struct pci_delete_interrupt {
+ struct pci_message message_type;
+ union win_slot_encoding wslot;
+ struct tran_int_desc int_desc;
+} __packed;
+
+struct pci_dev_incoming {
+ struct pci_incoming_message incoming;
+ union win_slot_encoding wslot;
+} __packed;
+
+struct pci_eject_response {
+ u32 message_type;
+ union win_slot_encoding wslot;
+ u32 status;
+} __packed;
+
+static int pci_ring_size = (4 * PAGE_SIZE);
+
+/*
+ * Definitions or interrupt steering hypercall.
+ */
+#define HV_PARTITION_ID_SELF ((u64)-1)
+#define HVCALL_RETARGET_INTERRUPT 0x7e
+
+struct retarget_msi_interrupt {
+ u64 partition_id; /* use "self" */
+ u64 device_id;
+ u32 source; /* 1 for MSI(-X) */
+ u32 reserved1;
+ u32 address;
+ u32 data;
+ u64 reserved2;
+ u32 vector;
+ u32 flags;
+ u64 vp_mask;
+} __packed;
+
+/*
+ * Driver specific state.
+ */
+
+enum hv_pcibus_state {
+ hv_pcibus_init = 0,
+ hv_pcibus_probed,
+ hv_pcibus_installed,
+ hv_pcibus_maximum
+};
+
+struct hv_pcibus_device {
+ struct pci_sysdata sysdata;
+ enum hv_pcibus_state state;
+ atomic_t remove_lock;
+ struct hv_device *hdev;
+ resource_size_t low_mmio_space;
+ resource_size_t high_mmio_space;
+ struct resource *mem_config;
+ struct resource *low_mmio_res;
+ struct resource *high_mmio_res;
+ struct completion *survey_event;
+ struct completion remove_event;
+ struct pci_bus *pci_bus;
+ spinlock_t config_lock; /* Avoid two threads writing index page */
+ spinlock_t device_list_lock; /* Protect lists below */
+ void __iomem *cfg_addr;
+
+ struct semaphore enum_sem;
+ struct list_head resources_for_children;
+
+ struct list_head children;
+ struct list_head dr_list;
+ struct work_struct wrk;
+
+ struct msi_domain_info msi_info;
+ struct msi_controller msi_chip;
+ struct irq_domain *irq_domain;
+};
+
+/*
+ * Tracks "Device Relations" messages from the host, which must be both
+ * processed in order and deferred so that they don't run in the context
+ * of the incoming packet callback.
+ */
+struct hv_dr_work {
+ struct work_struct wrk;
+ struct hv_pcibus_device *bus;
+};
+
+struct hv_dr_state {
+ struct list_head list_entry;
+ u32 device_count;
+ struct pci_function_description func[1];
+};
+
+enum hv_pcichild_state {
+ hv_pcichild_init = 0,
+ hv_pcichild_requirements,
+ hv_pcichild_resourced,
+ hv_pcichild_ejecting,
+ hv_pcichild_maximum
+};
+
+enum hv_pcidev_ref_reason {
+ hv_pcidev_ref_invalid = 0,
+ hv_pcidev_ref_initial,
+ hv_pcidev_ref_by_slot,
+ hv_pcidev_ref_packet,
+ hv_pcidev_ref_pnp,
+ hv_pcidev_ref_childlist,
+ hv_pcidev_irqdata,
+ hv_pcidev_ref_max
+};
+
+struct hv_pci_dev {
+ /* List protected by pci_rescan_remove_lock */
+ struct list_head list_entry;
+ atomic_t refs;
+ enum hv_pcichild_state state;
+ struct pci_function_description desc;
+ bool reported_missing;
+ struct hv_pcibus_device *hbus;
+ struct work_struct wrk;
+
+ /*
+ * What would be observed if one wrote 0xFFFFFFFF to a BAR and then
+ * read it back, for each of the BAR offsets within config space.
+ */
+ u32 probed_bar[6];
+};
+
+struct hv_pci_compl {
+ struct completion host_event;
+ s32 completion_status;
+};
+
+/**
+ * hv_pci_generic_compl() - Invoked for a completion packet
+ * @context: Set up by the sender of the packet.
+ * @resp: The response packet
+ * @resp_packet_size: Size in bytes of the packet
+ *
+ * This function is used to trigger an event and report status
+ * for any message for which the completion packet contains a
+ * status and nothing else.
+ */
+static
+void
+hv_pci_generic_compl(void *context, struct pci_response *resp,
+ int resp_packet_size)
+{
+ struct hv_pci_compl *comp_pkt = context;
+
+ if (resp_packet_size >= offsetofend(struct pci_response, status))
+ comp_pkt->completion_status = resp->status;
+ complete(&comp_pkt->host_event);
+}
+
+static struct hv_pci_dev *get_pcichild_wslot(struct hv_pcibus_device *hbus,
+ u32 wslot);
+static void get_pcichild(struct hv_pci_dev *hv_pcidev,
+ enum hv_pcidev_ref_reason reason);
+static void put_pcichild(struct hv_pci_dev *hv_pcidev,
+ enum hv_pcidev_ref_reason reason);
+
+static void get_hvpcibus(struct hv_pcibus_device *hv_pcibus);
+static void put_hvpcibus(struct hv_pcibus_device *hv_pcibus);
+
+/**
+ * devfn_to_wslot() - Convert from Linux PCI slot to Windows
+ * @devfn: The Linux representation of PCI slot
+ *
+ * Windows uses a slightly different representation of PCI slot.
+ *
+ * Return: The Windows representation
+ */
+static u32 devfn_to_wslot(int devfn)
+{
+ union win_slot_encoding wslot;
+
+ wslot.slot = 0;
+ wslot.bits.func = PCI_SLOT(devfn) | (PCI_FUNC(devfn) << 5);
+
+ return wslot.slot;
+}
+
+/**
+ * wslot_to_devfn() - Convert from Windows PCI slot to Linux
+ * @wslot: The Windows representation of PCI slot
+ *
+ * Windows uses a slightly different representation of PCI slot.
+ *
+ * Return: The Linux representation
+ */
+static int wslot_to_devfn(u32 wslot)
+{
+ union win_slot_encoding slot_no;
+
+ slot_no.slot = wslot;
+ return PCI_DEVFN(0, slot_no.bits.func);
+}
+
+/*
+ * PCI Configuration Space for these root PCI buses is implemented as a pair
+ * of pages in memory-mapped I/O space. Writing to the first page chooses
+ * the PCI function being written or read. Once the first page has been
+ * written to, the following page maps in the entire configuration space of
+ * the function.
+ */
+
+/**
+ * _hv_pcifront_read_config() - Internal PCI config read
+ * @hpdev: The PCI driver's representation of the device
+ * @where: Offset within config space
+ * @size: Size of the transfer
+ * @val: Pointer to the buffer receiving the data
+ */
+static void _hv_pcifront_read_config(struct hv_pci_dev *hpdev, int where,
+ int size, u32 *val)
+{
+ unsigned long flags;
+ void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
+
+ /*
+ * If the attempt is to read the IDs or the ROM BAR, simulate that.
+ */
+ if (where + size <= PCI_COMMAND) {
+ memcpy(val, ((u8 *)&hpdev->desc.v_id) + where, size);
+ } else if (where >= PCI_CLASS_REVISION && where + size <=
+ PCI_CACHE_LINE_SIZE) {
+ memcpy(val, ((u8 *)&hpdev->desc.rev) + where -
+ PCI_CLASS_REVISION, size);
+ } else if (where >= PCI_SUBSYSTEM_VENDOR_ID && where + size <=
+ PCI_ROM_ADDRESS) {
+ memcpy(val, (u8 *)&hpdev->desc.subsystem_id + where -
+ PCI_SUBSYSTEM_VENDOR_ID, size);
+ } else if (where >= PCI_ROM_ADDRESS && where + size <=
+ PCI_CAPABILITY_LIST) {
+ /* ROM BARs are unimplemented */
+ *val = 0;
+ } else if (where >= PCI_INTERRUPT_LINE && where + size <=
+ PCI_INTERRUPT_PIN) {
+ /*
+ * Interrupt Line and Interrupt PIN are hard-wired to zero
+ * because this front-end only supports message-signaled
+ * interrupts.
+ */
+ *val = 0;
+ } else if (where + size <= CFG_PAGE_SIZE) {
+ spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
+ /* Choose the function to be read. (See comment above) */
+ writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
+ /* Read from that function's config space. */
+ switch (size) {
+ case 1:
+ *val = readb(addr);
+ break;
+ case 2:
+ *val = readw(addr);
+ break;
+ default:
+ *val = readl(addr);
+ break;
+ }
+ spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+ } else {
+ dev_err(&hpdev->hbus->hdev->device,
+ "Attempt to read beyond a function's config space.\n");
+ }
+}
+
+/**
+ * _hv_pcifront_write_config() - Internal PCI config write
+ * @hpdev: The PCI driver's representation of the device
+ * @where: Offset within config space
+ * @size: Size of the transfer
+ * @val: The data being transferred
+ */
+static void _hv_pcifront_write_config(struct hv_pci_dev *hpdev, int where,
+ int size, u32 val)
+{
+ unsigned long flags;
+ void __iomem *addr = hpdev->hbus->cfg_addr + CFG_PAGE_OFFSET + where;
+
+ if (where >= PCI_SUBSYSTEM_VENDOR_ID &&
+ where + size <= PCI_CAPABILITY_LIST) {
+ /* SSIDs and ROM BARs are read-only */
+ } else if (where >= PCI_COMMAND && where + size <= CFG_PAGE_SIZE) {
+ spin_lock_irqsave(&hpdev->hbus->config_lock, flags);
+ /* Choose the function to be written. (See comment above) */
+ writel(hpdev->desc.win_slot.slot, hpdev->hbus->cfg_addr);
+ /* Write to that function's config space. */
+ switch (size) {
+ case 1:
+ writeb(val, addr);
+ break;
+ case 2:
+ writew(val, addr);
+ break;
+ default:
+ writel(val, addr);
+ break;
+ }
+ spin_unlock_irqrestore(&hpdev->hbus->config_lock, flags);
+ } else {
+ dev_err(&hpdev->hbus->hdev->device,
+ "Attempt to write beyond a function's config space.\n");
+ }
+}
+
+/**
+ * hv_pcifront_read_config() - Read configuration space
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be read
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ * PCIBIOS_DEVICE_NOT_FOUND on failure
+ */
+static int hv_pcifront_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct hv_pcibus_device *hbus =
+ container_of(bus->sysdata, struct hv_pcibus_device, sysdata);
+ struct hv_pci_dev *hpdev;
+
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(devfn));
+ if (!hpdev)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ _hv_pcifront_read_config(hpdev, where, size, val);
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * hv_pcifront_write_config() - Write configuration space
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be written to device
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ * PCIBIOS_DEVICE_NOT_FOUND on failure
+ */
+static int hv_pcifront_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct hv_pcibus_device *hbus =
+ container_of(bus->sysdata, struct hv_pcibus_device, sysdata);
+ struct hv_pci_dev *hpdev;
+
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(devfn));
+ if (!hpdev)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ _hv_pcifront_write_config(hpdev, where, size, val);
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCIe operations */
+static struct pci_ops hv_pcifront_ops = {
+ .read = hv_pcifront_read_config,
+ .write = hv_pcifront_write_config,
+};
+
+/* Interrupt management hooks */
+static void hv_int_desc_free(struct hv_pci_dev *hpdev,
+ struct tran_int_desc *int_desc)
+{
+ struct pci_delete_interrupt *int_pkt;
+ struct {
+ struct pci_packet pkt;
+ u8 buffer[sizeof(struct pci_delete_interrupt) -
+ sizeof(struct pci_message)];
+ } ctxt;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+ int_pkt = (struct pci_delete_interrupt *)&ctxt.pkt.message;
+ int_pkt->message_type.message_type =
+ PCI_DELETE_INTERRUPT_MESSAGE;
+ int_pkt->wslot.slot = hpdev->desc.win_slot.slot;
+ int_pkt->int_desc = *int_desc;
+ vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt, sizeof(*int_pkt),
+ (unsigned long)&ctxt.pkt, VM_PKT_DATA_INBAND, 0);
+ kfree(int_desc);
+}
+
+/**
+ * hv_msi_free() - Free the MSI.
+ * @domain: The interrupt domain pointer
+ * @info: Extra MSI-related context
+ * @irq: Identifies the IRQ.
+ *
+ * The Hyper-V parent partition and hypervisor are tracking the
+ * messages that are in use, keeping the interrupt redirection
+ * table up to date. This callback sends a message that frees
+ * the IRT entry and related tracking nonsense.
+ */
+static void hv_msi_free(struct irq_domain *domain, struct msi_domain_info *info,
+ unsigned int irq)
+{
+ struct hv_pcibus_device *hbus;
+ struct hv_pci_dev *hpdev;
+ struct pci_dev *pdev;
+ struct tran_int_desc *int_desc;
+ struct irq_data *irq_data = irq_domain_get_irq_data(domain, irq);
+ struct msi_desc *msi = irq_data_get_msi_desc(irq_data);
+
+ pdev = msi_desc_to_pci_dev(msi);
+ hbus = info->data;
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
+ if (!hpdev)
+ return;
+
+ int_desc = irq_data_get_irq_chip_data(irq_data);
+ if (int_desc) {
+ irq_data->chip_data = NULL;
+ hv_int_desc_free(hpdev, int_desc);
+ }
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+}
+
+static int hv_set_affinity(struct irq_data *data, const struct cpumask *dest,
+ bool force)
+{
+ struct irq_data *parent = data->parent_data;
+
+ return parent->chip->irq_set_affinity(parent, dest, force);
+}
+
+void hv_irq_mask(struct irq_data *data)
+{
+ pci_msi_mask_irq(data);
+}
+
+/**
+ * hv_irq_unmask() - "Unmask" the IRQ by setting its current
+ * affinity.
+ * @data: Describes the IRQ
+ *
+ * Build new a destination for the MSI and make a hypercall to
+ * update the Interrupt Redirection Table. "Device Logical ID"
+ * is built out of this PCI bus's instance GUID and the function
+ * number of the device.
+ */
+void hv_irq_unmask(struct irq_data *data)
+{
+ struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
+ struct irq_cfg *cfg = irqd_cfg(data);
+ struct retarget_msi_interrupt params;
+ struct hv_pcibus_device *hbus;
+ struct cpumask *dest;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev;
+ int cpu;
+
+ dest = irq_data_get_affinity_mask(data);
+ pdev = msi_desc_to_pci_dev(msi_desc);
+ pbus = pdev->bus;
+ hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+
+ memset(¶ms, 0, sizeof(params));
+ params.partition_id = HV_PARTITION_ID_SELF;
+ params.source = 1; /* MSI(-X) */
+ params.address = msi_desc->msg.address_lo;
+ params.data = msi_desc->msg.data;
+ params.device_id = (hbus->hdev->dev_instance.b[5] << 24) |
+ (hbus->hdev->dev_instance.b[4] << 16) |
+ (hbus->hdev->dev_instance.b[7] << 8) |
+ (hbus->hdev->dev_instance.b[6] & 0xf8) |
+ PCI_FUNC(pdev->devfn);
+ params.vector = cfg->vector;
+
+ for_each_cpu_and(cpu, dest, cpu_online_mask)
+ params.vp_mask |= (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+
+ hv_do_hypercall(HVCALL_RETARGET_INTERRUPT, ¶ms, NULL);
+
+ pci_msi_unmask_irq(data);
+}
+
+struct compose_comp_ctxt {
+ struct hv_pci_compl comp_pkt;
+ struct tran_int_desc int_desc;
+};
+
+static void hv_pci_compose_compl(void *context, struct pci_response *resp,
+ int resp_packet_size)
+{
+ struct compose_comp_ctxt *comp_pkt = context;
+ struct pci_create_int_response *int_resp =
+ (struct pci_create_int_response *)resp;
+
+ comp_pkt->comp_pkt.completion_status = resp->status;
+ comp_pkt->int_desc = int_resp->int_desc;
+ complete(&comp_pkt->comp_pkt.host_event);
+}
+
+/**
+ * hv_compose_msi_msg() - Supplies a valid MSI address/data
+ * @data: Everything about this MSI
+ * @msg: Buffer that is filled in by this function
+ *
+ * This function unpacks the IRQ looking for target CPU set, IDT
+ * vector and mode and sends a message to the parent partition
+ * asking for a mapping for that tuple in this partition. The
+ * response supplies a data value and address to which that data
+ * should be written to trigger that interrupt.
+ */
+static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ struct irq_cfg *cfg = irqd_cfg(data);
+ struct hv_pcibus_device *hbus;
+ struct hv_pci_dev *hpdev;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev;
+ struct pci_create_interrupt *int_pkt;
+ struct compose_comp_ctxt comp;
+ struct tran_int_desc *int_desc;
+ struct cpumask *affinity;
+ struct {
+ struct pci_packet pkt;
+ u8 buffer[sizeof(struct pci_create_interrupt) -
+ sizeof(struct pci_message)];
+ } ctxt;
+ int cpu;
+ int ret;
+
+ pdev = msi_desc_to_pci_dev(irq_data_get_msi_desc(data));
+ pbus = pdev->bus;
+ hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+ hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
+ if (!hpdev)
+ goto return_null_message;
+
+ /* Free any previous message that might have already been composed. */
+ if (data->chip_data) {
+ int_desc = data->chip_data;
+ data->chip_data = NULL;
+ hv_int_desc_free(hpdev, int_desc);
+ }
+
+ int_desc = kzalloc(sizeof(*int_desc), GFP_KERNEL);
+ if (!int_desc)
+ goto drop_reference;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+ init_completion(&comp.comp_pkt.host_event);
+ ctxt.pkt.completion_func = hv_pci_compose_compl;
+ ctxt.pkt.compl_ctxt = ∁
+ int_pkt = (struct pci_create_interrupt *)&ctxt.pkt.message;
+ int_pkt->message_type.message_type = PCI_CREATE_INTERRUPT_MESSAGE;
+ int_pkt->wslot.slot = hpdev->desc.win_slot.slot;
+ int_pkt->int_desc.vector = cfg->vector;
+ int_pkt->int_desc.vector_count = 1;
+ int_pkt->int_desc.delivery_mode =
+ (apic->irq_delivery_mode == dest_LowestPrio) ? 1 : 0;
+
+ /*
+ * This bit doesn't have to work on machines with more than 64
+ * processors because Hyper-V only supports 64 in a guest.
+ */
+ affinity = irq_data_get_affinity_mask(data);
+ for_each_cpu_and(cpu, affinity, cpu_online_mask) {
+ int_pkt->int_desc.cpu_mask |=
+ (1ULL << vmbus_cpu_number_to_vp_number(cpu));
+ }
+
+ ret = vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt,
+ sizeof(*int_pkt), (unsigned long)&ctxt.pkt,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (!ret)
+ wait_for_completion(&comp.comp_pkt.host_event);
+
+ if (comp.comp_pkt.completion_status < 0) {
+ dev_err(&hbus->hdev->device,
+ "Request for interrupt failed: 0x%x",
+ comp.comp_pkt.completion_status);
+ goto free_int_desc;
+ }
+
+ /*
+ * Record the assignment so that this can be unwound later. Using
+ * irq_set_chip_data() here would be appropriate, but the lock it takes
+ * is already held.
+ */
+ *int_desc = comp.int_desc;
+ data->chip_data = int_desc;
+
+ /* Pass up the result. */
+ msg->address_hi = comp.int_desc.address >> 32;
+ msg->address_lo = comp.int_desc.address & 0xffffffff;
+ msg->data = comp.int_desc.data;
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+ return;
+
+free_int_desc:
+ kfree(int_desc);
+drop_reference:
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+return_null_message:
+ msg->address_hi = 0;
+ msg->address_lo = 0;
+ msg->data = 0;
+}
+
+/* HW Interrupt Chip Descriptor */
+static struct irq_chip hv_msi_irq_chip = {
+ .name = "Hyper-V PCIe MSI",
+ .irq_compose_msi_msg = hv_compose_msi_msg,
+ .irq_set_affinity = hv_set_affinity,
+ .irq_ack = irq_chip_ack_parent,
+ .irq_mask = hv_irq_mask,
+ .irq_unmask = hv_irq_unmask,
+};
+
+static irq_hw_number_t hv_msi_domain_ops_get_hwirq(struct msi_domain_info *info,
+ msi_alloc_info_t *arg)
+{
+ return arg->msi_hwirq;
+}
+
+static struct msi_domain_ops hv_msi_ops = {
+ .get_hwirq = hv_msi_domain_ops_get_hwirq,
+ .msi_prepare = pci_msi_prepare,
+ .set_desc = pci_msi_set_desc,
+ .msi_free = hv_msi_free,
+};
+
+/**
+ * hv_pcie_init_irq_domain() - Initialize IRQ domain
+ * @hbus: The root PCI bus
+ *
+ * This function creates an IRQ domain which will be used for
+ * interrupts from devices that have been passed through. These
+ * devices only support MSI and MSI-X, not line-based interrupts
+ * or simulations of line-based interrupts through PCIe's
+ * fabric-layer messages. Because interrupts are remapped, we
+ * can support multi-message MSI here.
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus)
+{
+ hbus->msi_info.chip = &hv_msi_irq_chip;
+ hbus->msi_info.ops = &hv_msi_ops;
+ hbus->msi_info.flags = (MSI_FLAG_USE_DEF_DOM_OPS |
+ MSI_FLAG_USE_DEF_CHIP_OPS | MSI_FLAG_MULTI_PCI_MSI |
+ MSI_FLAG_PCI_MSIX);
+ hbus->msi_info.handler = handle_edge_irq;
+ hbus->msi_info.handler_name = "edge";
+ hbus->msi_info.data = hbus;
+ hbus->irq_domain = pci_msi_create_irq_domain(hbus->sysdata.fwnode,
+ &hbus->msi_info,
+ x86_vector_domain);
+ if (!hbus->irq_domain) {
+ dev_err(&hbus->hdev->device,
+ "Failed to build an MSI IRQ domain\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/**
+ * get_bar_size() - Get the address space consumed by a BAR
+ * @bar_val: Value that a BAR returned after -1 was written
+ * to it.
+ *
+ * This function returns the size of the BAR, rounded up to 1
+ * page. It has to be rounded up because the hypervisor's page
+ * table entry that maps the BAR into the VM can't specify an
+ * offset within a page. The invariant is that the hypervisor
+ * must place any BARs of smaller than page length at the
+ * beginning of a page.
+ *
+ * Return: Size in bytes of the consumed MMIO space.
+ */
+static u64 get_bar_size(u64 bar_val)
+{
+ return round_up((1 + ~(bar_val & PCI_BASE_ADDRESS_MEM_MASK)),
+ PAGE_SIZE);
+}
+
+/**
+ * survey_child_resources() - Total all MMIO requirements
+ * @hbus: Root PCI bus, as understood by this driver
+ */
+static void survey_child_resources(struct hv_pcibus_device *hbus)
+{
+ struct list_head *iter;
+ struct hv_pci_dev *hpdev;
+ resource_size_t bar_size = 0;
+ unsigned long flags;
+ struct completion *event;
+ u64 bar_val;
+ int i;
+
+ /* If nobody is waiting on the answer, don't compute it. */
+ event = xchg(&hbus->survey_event, NULL);
+ if (!event)
+ return;
+
+ /* If the answer has already been computed, go with it. */
+ if (hbus->low_mmio_space || hbus->high_mmio_space) {
+ complete(event);
+ return;
+ }
+
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+
+ /*
+ * Due to an interesting quirk of the PCI spec, all memory regions
+ * for a child device are a power of 2 in size and aligned in memory,
+ * so it's sufficient to just add them up without tracking alignment.
+ */
+ list_for_each(iter, &hbus->children) {
+ hpdev = container_of(iter, struct hv_pci_dev, list_entry);
+ for (i = 0; i < 6; i++) {
+ if (hpdev->probed_bar[i] & PCI_BASE_ADDRESS_SPACE_IO)
+ dev_err(&hbus->hdev->device,
+ "There's an I/O BAR in this list!\n");
+
+ if (hpdev->probed_bar[i] != 0) {
+ /*
+ * A probed BAR has all the upper bits set that
+ * can be changed.
+ */
+
+ bar_val = hpdev->probed_bar[i];
+ if (bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64)
+ bar_val |=
+ ((u64)hpdev->probed_bar[++i] << 32);
+ else
+ bar_val |= 0xffffffff00000000ULL;
+
+ bar_size = get_bar_size(bar_val);
+
+ if (bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64)
+ hbus->high_mmio_space += bar_size;
+ else
+ hbus->low_mmio_space += bar_size;
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+ complete(event);
+}
+
+/**
+ * prepopulate_bars() - Fill in BARs with defaults
+ * @hbus: Root PCI bus, as understood by this driver
+ *
+ * The core PCI driver code seems much, much happier if the BARs
+ * for a device have values upon first scan. So fill them in.
+ * The algorithm below works down from large sizes to small,
+ * attempting to pack the assignments optimally. The assumption,
+ * enforced in other parts of the code, is that the beginning of
+ * the memory-mapped I/O space will be aligned on the largest
+ * BAR size.
+ */
+static void prepopulate_bars(struct hv_pcibus_device *hbus)
+{
+ resource_size_t high_size = 0;
+ resource_size_t low_size = 0;
+ resource_size_t high_base = 0;
+ resource_size_t low_base = 0;
+ resource_size_t bar_size;
+ struct hv_pci_dev *hpdev;
+ struct list_head *iter;
+ unsigned long flags;
+ u64 bar_val;
+ u32 command;
+ bool high;
+ int i;
+
+ if (hbus->low_mmio_space) {
+ low_size = 1ULL << (63 - __builtin_clzll(hbus->low_mmio_space));
+ low_base = hbus->low_mmio_res->start;
+ }
+
+ if (hbus->high_mmio_space) {
+ high_size = 1ULL <<
+ (63 - __builtin_clzll(hbus->high_mmio_space));
+ high_base = hbus->high_mmio_res->start;
+ }
+
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+
+ /* Pick addresses for the BARs. */
+ do {
+ list_for_each(iter, &hbus->children) {
+ hpdev = container_of(iter, struct hv_pci_dev,
+ list_entry);
+ for (i = 0; i < 6; i++) {
+ bar_val = hpdev->probed_bar[i];
+ if (bar_val == 0)
+ continue;
+ high = bar_val & PCI_BASE_ADDRESS_MEM_TYPE_64;
+ if (high) {
+ bar_val |=
+ ((u64)hpdev->probed_bar[i + 1]
+ << 32);
+ } else {
+ bar_val |= 0xffffffffULL << 32;
+ }
+ bar_size = get_bar_size(bar_val);
+ if (high) {
+ if (high_size != bar_size) {
+ i++;
+ continue;
+ }
+ _hv_pcifront_write_config(hpdev,
+ PCI_BASE_ADDRESS_0 + (4 * i),
+ 4,
+ (u32)(high_base & 0xffffff00));
+ i++;
+ _hv_pcifront_write_config(hpdev,
+ PCI_BASE_ADDRESS_0 + (4 * i),
+ 4, (u32)(high_base >> 32));
+ high_base += bar_size;
+ } else {
+ if (low_size != bar_size)
+ continue;
+ _hv_pcifront_write_config(hpdev,
+ PCI_BASE_ADDRESS_0 + (4 * i),
+ 4,
+ (u32)(low_base & 0xffffff00));
+ low_base += bar_size;
+ }
+ }
+ if (high_size <= 1 && low_size <= 1) {
+ /* Set the memory enable bit. */
+ _hv_pcifront_read_config(hpdev, PCI_COMMAND, 2,
+ &command);
+ command |= PCI_COMMAND_MEMORY;
+ _hv_pcifront_write_config(hpdev, PCI_COMMAND, 2,
+ command);
+ break;
+ }
+ }
+
+ high_size >>= 1;
+ low_size >>= 1;
+ } while (high_size || low_size);
+
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+}
+
+/**
+ * create_root_hv_pci_bus() - Expose a new root PCI bus
+ * @hbus: Root PCI bus, as understood by this driver
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
+{
+ /* Register the device */
+ hbus->pci_bus = pci_create_root_bus(&hbus->hdev->device,
+ 0, /* bus number is always zero */
+ &hv_pcifront_ops,
+ &hbus->sysdata,
+ &hbus->resources_for_children);
+ if (!hbus->pci_bus)
+ return -ENODEV;
+
+ hbus->pci_bus->msi = &hbus->msi_chip;
+ hbus->pci_bus->msi->dev = &hbus->hdev->device;
+
+ pci_scan_child_bus(hbus->pci_bus);
+ pci_bus_assign_resources(hbus->pci_bus);
+ pci_bus_add_devices(hbus->pci_bus);
+ hbus->state = hv_pcibus_installed;
+ return 0;
+}
+
+struct q_res_req_compl {
+ struct completion host_event;
+ struct hv_pci_dev *hpdev;
+};
+
+/**
+ * q_resource_requirements() - Query Resource Requirements
+ * @context: The completion context.
+ * @resp: The response that came from the host.
+ * @resp_packet_size: The size in bytes of resp.
+ *
+ * This function is invoked on completion of a Query Resource
+ * Requirements packet.
+ */
+static void q_resource_requirements(void *context, struct pci_response *resp,
+ int resp_packet_size)
+{
+ struct q_res_req_compl *completion = context;
+ struct pci_q_res_req_response *q_res_req =
+ (struct pci_q_res_req_response *)resp;
+ int i;
+
+ if (resp->status < 0) {
+ dev_err(&completion->hpdev->hbus->hdev->device,
+ "query resource requirements failed: %x\n",
+ resp->status);
+ } else {
+ for (i = 0; i < 6; i++) {
+ completion->hpdev->probed_bar[i] =
+ q_res_req->probed_bar[i];
+ }
+ }
+
+ complete(&completion->host_event);
+}
+
+static void get_pcichild(struct hv_pci_dev *hpdev,
+ enum hv_pcidev_ref_reason reason)
+{
+ atomic_inc(&hpdev->refs);
+}
+
+static void put_pcichild(struct hv_pci_dev *hpdev,
+ enum hv_pcidev_ref_reason reason)
+{
+ if (atomic_dec_and_test(&hpdev->refs))
+ kfree(hpdev);
+}
+
+/**
+ * new_pcichild_device() - Create a new child device
+ * @hbus: The internal struct tracking this root PCI bus.
+ * @desc: The information supplied so far from the host
+ * about the device.
+ *
+ * This function creates the tracking structure for a new child
+ * device and kicks off the process of figuring out what it is.
+ *
+ * Return: Pointer to the new tracking struct
+ */
+static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
+ struct pci_function_description *desc)
+{
+ struct hv_pci_dev *hpdev;
+ struct pci_child_message *res_req;
+ struct q_res_req_compl comp_pkt;
+ union {
+ struct pci_packet init_packet;
+ u8 buffer[0x100];
+ } pkt;
+ unsigned long flags;
+ int ret;
+
+ hpdev = kzalloc(sizeof(*hpdev), GFP_ATOMIC);
+ if (!hpdev)
+ return NULL;
+
+ hpdev->hbus = hbus;
+
+ memset(&pkt, 0, sizeof(pkt));
+ init_completion(&comp_pkt.host_event);
+ comp_pkt.hpdev = hpdev;
+ pkt.init_packet.compl_ctxt = &comp_pkt;
+ pkt.init_packet.completion_func = q_resource_requirements;
+ res_req = (struct pci_child_message *)&pkt.init_packet.message;
+ res_req->message_type = PCI_QUERY_RESOURCE_REQUIREMENTS;
+ res_req->wslot.slot = desc->win_slot.slot;
+
+ ret = vmbus_sendpacket(hbus->hdev->channel, res_req,
+ sizeof(struct pci_child_message),
+ (unsigned long)&pkt.init_packet,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ goto error;
+
+ wait_for_completion(&comp_pkt.host_event);
+
+ hpdev->desc = *desc;
+ get_pcichild(hpdev, hv_pcidev_ref_initial);
+ get_pcichild(hpdev, hv_pcidev_ref_childlist);
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ list_add_tail(&hpdev->list_entry, &hbus->children);
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+ return hpdev;
+
+error:
+ kfree(hpdev);
+ return NULL;
+}
+
+/**
+ * get_pcichild_wslot() - Find device from slot
+ * @hbus: Root PCI bus, as understood by this driver
+ * @wslot: Location on the bus
+ *
+ * This function looks up a PCI device and returns the internal
+ * representation of it. It acquires a reference on it, so that
+ * the device won't be deleted while somebody is using it. The
+ * caller is responsible for calling put_pcichild() to release
+ * this reference.
+ *
+ * Return: Internal representation of a PCI device
+ */
+static struct hv_pci_dev *get_pcichild_wslot(struct hv_pcibus_device *hbus,
+ u32 wslot)
+{
+ unsigned long flags;
+ struct hv_pci_dev *iter, *hpdev = NULL;
+
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ list_for_each_entry(iter, &hbus->children, list_entry) {
+ if (iter->desc.win_slot.slot == wslot) {
+ hpdev = iter;
+ get_pcichild(hpdev, hv_pcidev_ref_by_slot);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ return hpdev;
+}
+
+/**
+ * pci_devices_present_work() - Handle new list of child devices
+ * @work: Work struct embedded in struct hv_dr_work
+ *
+ * "Bus Relations" is the Windows term for "children of this
+ * bus." The terminology is preserved here for people trying to
+ * debug the interaction between Hyper-V and Linux. This
+ * function is called when the parent partition reports a list
+ * of functions that should be observed under this PCI Express
+ * port (bus).
+ *
+ * This function updates the list, and must tolerate being
+ * called multiple times with the same information. The typical
+ * number of child devices is one, with very atypical cases
+ * involving three or four, so the algorithms used here can be
+ * simple and inefficient.
+ *
+ * It must also treat the omission of a previously observed device as
+ * notification that the device no longer exists.
+ *
+ * Note that this function is a work item, and it may not be
+ * invoked in the order that it was queued. Back to back
+ * updates of the list of present devices may involve queuing
+ * multiple work items, and this one may run before ones that
+ * were sent later. As such, this function only does something
+ * if is the last one in the queue.
+ */
+static void pci_devices_present_work(struct work_struct *work)
+{
+ u32 child_no;
+ bool found;
+ struct list_head *iter;
+ struct pci_function_description *new_desc;
+ struct hv_pci_dev *hpdev;
+ struct hv_pcibus_device *hbus;
+ struct list_head removed;
+ struct hv_dr_work *dr_wrk;
+ struct hv_dr_state *dr = NULL;
+ unsigned long flags;
+
+ dr_wrk = container_of(work, struct hv_dr_work, wrk);
+ hbus = dr_wrk->bus;
+ kfree(dr_wrk);
+
+ INIT_LIST_HEAD(&removed);
+
+ if (down_interruptible(&hbus->enum_sem)) {
+ put_hvpcibus(hbus);
+ return;
+ }
+
+ /* Pull this off the queue and process it if it was the last one. */
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ while (!list_empty(&hbus->dr_list)) {
+ dr = list_first_entry(&hbus->dr_list, struct hv_dr_state,
+ list_entry);
+ list_del(&dr->list_entry);
+
+ /* Throw this away if the list still has stuff in it. */
+ if (!list_empty(&hbus->dr_list)) {
+ kfree(dr);
+ continue;
+ }
+ }
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ if (!dr) {
+ up(&hbus->enum_sem);
+ put_hvpcibus(hbus);
+ return;
+ }
+
+ /* First, mark all existing children as reported missing. */
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ list_for_each(iter, &hbus->children) {
+ hpdev = container_of(iter, struct hv_pci_dev,
+ list_entry);
+ hpdev->reported_missing = true;
+ }
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ /* Next, add back any reported devices. */
+ for (child_no = 0; child_no < dr->device_count; child_no++) {
+ found = false;
+ new_desc = &dr->func[child_no];
+
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ list_for_each(iter, &hbus->children) {
+ hpdev = container_of(iter, struct hv_pci_dev,
+ list_entry);
+ if ((hpdev->desc.win_slot.slot ==
+ new_desc->win_slot.slot) &&
+ (hpdev->desc.v_id == new_desc->v_id) &&
+ (hpdev->desc.d_id == new_desc->d_id) &&
+ (hpdev->desc.ser == new_desc->ser)) {
+ hpdev->reported_missing = false;
+ found = true;
+ }
+ }
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ if (!found) {
+ hpdev = new_pcichild_device(hbus, new_desc);
+ if (!hpdev)
+ dev_err(&hbus->hdev->device,
+ "couldn't record a child device.\n");
+ }
+ }
+
+ /* Move missing children to a list on the stack. */
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ do {
+ found = false;
+ list_for_each(iter, &hbus->children) {
+ hpdev = container_of(iter, struct hv_pci_dev,
+ list_entry);
+ if (hpdev->reported_missing) {
+ found = true;
+ put_pcichild(hpdev, hv_pcidev_ref_childlist);
+ list_del(&hpdev->list_entry);
+ list_add_tail(&hpdev->list_entry, &removed);
+ break;
+ }
+ }
+ } while (found);
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ /* Delete everything that should no longer exist. */
+ while (!list_empty(&removed)) {
+ hpdev = list_first_entry(&removed, struct hv_pci_dev,
+ list_entry);
+ list_del(&hpdev->list_entry);
+ put_pcichild(hpdev, hv_pcidev_ref_initial);
+ }
+
+ /* Tell the core to rescan bus because there may have been changes. */
+ if (hbus->state == hv_pcibus_installed) {
+ pci_lock_rescan_remove();
+ pci_scan_child_bus(hbus->pci_bus);
+ pci_unlock_rescan_remove();
+ } else {
+ survey_child_resources(hbus);
+ }
+
+ up(&hbus->enum_sem);
+ put_hvpcibus(hbus);
+ kfree(dr);
+}
+
+/**
+ * hv_pci_devices_present() - Handles list of new children
+ * @hbus: Root PCI bus, as understood by this driver
+ * @relations: Packet from host listing children
+ *
+ * This function is invoked whenever a new list of devices for
+ * this bus appears.
+ */
+static void hv_pci_devices_present(struct hv_pcibus_device *hbus,
+ struct pci_bus_relations *relations)
+{
+ struct hv_dr_state *dr;
+ struct hv_dr_work *dr_wrk;
+ unsigned long flags;
+
+ dr_wrk = kzalloc(sizeof(*dr_wrk), GFP_NOWAIT);
+ if (!dr_wrk)
+ return;
+
+ dr = kzalloc(offsetof(struct hv_dr_state, func) +
+ (sizeof(struct pci_function_description) *
+ (relations->device_count)), GFP_NOWAIT);
+ if (!dr) {
+ kfree(dr_wrk);
+ return;
+ }
+
+ INIT_WORK(&dr_wrk->wrk, pci_devices_present_work);
+ dr_wrk->bus = hbus;
+ dr->device_count = relations->device_count;
+ if (dr->device_count != 0) {
+ memcpy(dr->func, relations->func,
+ sizeof(struct pci_function_description) *
+ dr->device_count);
+ }
+
+ spin_lock_irqsave(&hbus->device_list_lock, flags);
+ list_add_tail(&dr->list_entry, &hbus->dr_list);
+ spin_unlock_irqrestore(&hbus->device_list_lock, flags);
+
+ get_hvpcibus(hbus);
+ schedule_work(&dr_wrk->wrk);
+}
+
+/**
+ * hv_eject_device_work() - Asynchronously handles ejection
+ * @work: Work struct embedded in internal device struct
+ *
+ * This function handles ejecting a device. Windows will
+ * attempt to gracefully eject a device, waiting 60 seconds to
+ * hear back from the guest OS that this completed successfully.
+ * If this timer expires, the device will be forcibly removed.
+ */
+static void hv_eject_device_work(struct work_struct *work)
+{
+ struct pci_eject_response *ejct_pkt;
+ struct hv_pci_dev *hpdev;
+ struct pci_dev *pdev;
+ unsigned long flags;
+ int wslot;
+ struct {
+ struct pci_packet pkt;
+ u8 buffer[sizeof(struct pci_eject_response) -
+ sizeof(struct pci_message)];
+ } ctxt;
+
+ hpdev = container_of(work, struct hv_pci_dev, wrk);
+
+ if (hpdev->state != hv_pcichild_ejecting) {
+ put_pcichild(hpdev, hv_pcidev_ref_pnp);
+ return;
+ }
+
+ /*
+ * Ejection can come before or after the PCI bus has been set up, so
+ * attempt to find it and tear down the bus state, if it exists. This
+ * must be done without constructs like pci_domain_nr(hbus->pci_bus)
+ * because hbus->pci_bus may not exist yet.
+ */
+ wslot = wslot_to_devfn(hpdev->desc.win_slot.slot);
+ pdev = pci_get_domain_bus_and_slot(hpdev->hbus->sysdata.domain, 0,
+ wslot);
+ if (pdev) {
+ pci_stop_and_remove_bus_device(pdev);
+ pci_dev_put(pdev);
+ }
+
+ memset(&ctxt, 0, sizeof(ctxt));
+ ejct_pkt = (struct pci_eject_response *)&ctxt.pkt.message;
+ ejct_pkt->message_type = PCI_EJECTION_COMPLETE;
+ ejct_pkt->wslot.slot = hpdev->desc.win_slot.slot;
+ vmbus_sendpacket(hpdev->hbus->hdev->channel, ejct_pkt,
+ sizeof(*ejct_pkt), (unsigned long)&ctxt.pkt,
+ VM_PKT_DATA_INBAND, 0);
+
+ spin_lock_irqsave(&hpdev->hbus->device_list_lock, flags);
+ list_del(&hpdev->list_entry);
+ spin_unlock_irqrestore(&hpdev->hbus->device_list_lock, flags);
+
+ put_pcichild(hpdev, hv_pcidev_ref_childlist);
+ put_pcichild(hpdev, hv_pcidev_ref_pnp);
+ put_hvpcibus(hpdev->hbus);
+}
+
+/**
+ * hv_pci_eject_device() - Handles device ejection
+ * @hpdev: Internal device tracking struct
+ *
+ * This function is invoked when an ejection packet arrives. It
+ * just schedules work so that we don't re-enter the packet
+ * delivery code handling the ejection.
+ */
+static void hv_pci_eject_device(struct hv_pci_dev *hpdev)
+{
+ hpdev->state = hv_pcichild_ejecting;
+ get_pcichild(hpdev, hv_pcidev_ref_pnp);
+ INIT_WORK(&hpdev->wrk, hv_eject_device_work);
+ get_hvpcibus(hpdev->hbus);
+ schedule_work(&hpdev->wrk);
+}
+
+/**
+ * hv_pci_onchannelcallback() - Handles incoming packets
+ * @context: Internal bus tracking struct
+ *
+ * This function is invoked whenever the host sends a packet to
+ * this channel (which is private to this root PCI bus).
+ */
+static void hv_pci_onchannelcallback(void *context)
+{
+ const int packet_size = 0x100;
+ int ret;
+ struct hv_pcibus_device *hbus = context;
+ u32 bytes_recvd;
+ u64 req_id;
+ struct vmpacket_descriptor *desc;
+ unsigned char *buffer;
+ int bufferlen = packet_size;
+ struct pci_packet *comp_packet;
+ struct pci_response *response;
+ struct pci_incoming_message *new_message;
+ struct pci_bus_relations *bus_rel;
+ struct pci_dev_incoming *dev_message;
+ struct hv_pci_dev *hpdev;
+
+ buffer = kmalloc(bufferlen, GFP_ATOMIC);
+ if (!buffer)
+ return;
+
+ while (1) {
+ ret = vmbus_recvpacket_raw(hbus->hdev->channel, buffer,
+ bufferlen, &bytes_recvd, &req_id);
+
+ if (ret == -ENOBUFS) {
+ kfree(buffer);
+ /* Handle large packet */
+ bufferlen = bytes_recvd;
+ buffer = kmalloc(bytes_recvd, GFP_ATOMIC);
+ if (!buffer)
+ return;
+ continue;
+ }
+
+ /*
+ * All incoming packets must be at least as large as a
+ * response.
+ */
+ if (bytes_recvd <= sizeof(struct pci_response)) {
+ kfree(buffer);
+ return;
+ }
+ desc = (struct vmpacket_descriptor *)buffer;
+
+ switch (desc->type) {
+ case VM_PKT_COMP:
+
+ /*
+ * The host is trusted, and thus it's safe to interpret
+ * this transaction ID as a pointer.
+ */
+ comp_packet = (struct pci_packet *)req_id;
+ response = (struct pci_response *)buffer;
+ comp_packet->completion_func(comp_packet->compl_ctxt,
+ response,
+ bytes_recvd);
+ kfree(buffer);
+ return;
+
+ case VM_PKT_DATA_INBAND:
+
+ new_message = (struct pci_incoming_message *)buffer;
+ switch (new_message->message_type.message_type) {
+ case PCI_BUS_RELATIONS:
+
+ bus_rel = (struct pci_bus_relations *)buffer;
+ if (bytes_recvd <
+ offsetof(struct pci_bus_relations, func) +
+ (sizeof(struct pci_function_description) *
+ (bus_rel->device_count))) {
+ dev_err(&hbus->hdev->device,
+ "bus relations too small\n");
+ break;
+ }
+
+ hv_pci_devices_present(hbus, bus_rel);
+ break;
+
+ case PCI_EJECT:
+
+ dev_message = (struct pci_dev_incoming *)buffer;
+ hpdev = get_pcichild_wslot(hbus,
+ dev_message->wslot.slot);
+ if (hpdev) {
+ hv_pci_eject_device(hpdev);
+ put_pcichild(hpdev,
+ hv_pcidev_ref_by_slot);
+ }
+ break;
+
+ default:
+ dev_warn(&hbus->hdev->device,
+ "Unimplemented protocol message %x\n",
+ new_message->message_type.message_type);
+ break;
+ }
+ break;
+
+ default:
+ dev_err(&hbus->hdev->device,
+ "unhandled packet type %d, tid %llx len %d\n",
+ desc->type, req_id, bytes_recvd);
+ break;
+ }
+ break;
+ }
+}
+
+/**
+ * hv_pci_protocol_negotiation() - Set up protocol
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * This driver is intended to support running on Windows 10
+ * (server) and later versions. It will not run on earlier
+ * versions, as they assume that many of the operations which
+ * Linux needs accomplished with a spinlock held were done via
+ * asynchronous messaging via VMBus. Windows 10 increases the
+ * surface area of PCI emulation so that these actions can take
+ * place by suspending a virtual processor for their duration.
+ *
+ * This function negotiates the channel protocol version,
+ * failing if the host doesn't support the necessary protocol
+ * level.
+ */
+static int hv_pci_protocol_negotiation(struct hv_device *hdev)
+{
+ struct pci_version_request *version_req;
+ struct hv_pci_compl comp_pkt;
+ struct pci_packet *pkt;
+ int ret;
+
+ /*
+ * Initiate the handshake with the host and negotiate
+ * a version that the host can support. We start with the
+ * highest version number and go down if the host cannot
+ * support it.
+ */
+ pkt = kzalloc(sizeof(*pkt) + sizeof(*version_req), GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
+ init_completion(&comp_pkt.host_event);
+ pkt->completion_func = hv_pci_generic_compl;
+ pkt->compl_ctxt = &comp_pkt;
+ version_req = (struct pci_version_request *)&pkt->message;
+ version_req->message_type.message_type = PCI_QUERY_PROTOCOL_VERSION;
+ version_req->protocol_version = PCI_PROTOCOL_VERSION_CURRENT;
+
+ ret = vmbus_sendpacket(hdev->channel, version_req,
+ sizeof(struct pci_version_request),
+ (unsigned long)pkt, VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ goto exit;
+
+ wait_for_completion(&comp_pkt.host_event);
+
+ if (comp_pkt.completion_status < 0) {
+ dev_err(&hdev->device,
+ "PCI Pass-through VSP failed version request %x\n",
+ comp_pkt.completion_status);
+ ret = -EPROTO;
+ goto exit;
+ }
+
+ ret = 0;
+
+exit:
+ kfree(pkt);
+ return ret;
+}
+
+/**
+ * hv_pci_free_bridge_windows() - Release memory regions for the
+ * bus
+ * @hbus: Root PCI bus, as understood by this driver
+ */
+static void hv_pci_free_bridge_windows(struct hv_pcibus_device *hbus)
+{
+ /*
+ * Set the resources back to the way they looked when they
+ * were allocated by setting IORESOURCE_BUSY again.
+ */
+
+ if (hbus->low_mmio_space && hbus->low_mmio_res) {
+ hbus->low_mmio_res->flags |= IORESOURCE_BUSY;
+ release_mem_region(hbus->low_mmio_res->start,
+ resource_size(hbus->low_mmio_res));
+ }
+
+ if (hbus->high_mmio_space && hbus->high_mmio_res) {
+ hbus->high_mmio_res->flags |= IORESOURCE_BUSY;
+ release_mem_region(hbus->high_mmio_res->start,
+ resource_size(hbus->high_mmio_res));
+ }
+}
+
+/**
+ * hv_pci_allocate_bridge_windows() - Allocate memory regions
+ * for the bus
+ * @hbus: Root PCI bus, as understood by this driver
+ *
+ * This function calls vmbus_allocate_mmio(), which is itself a
+ * bit of a compromise. Ideally, we might change the pnp layer
+ * in the kernel such that it comprehends either PCI devices
+ * which are "grandchildren of ACPI," with some intermediate bus
+ * node (in this case, VMBus) or change it such that it
+ * understands VMBus. The pnp layer, however, has been declared
+ * deprecated, and not subject to change.
+ *
+ * The workaround, implemented here, is to ask VMBus to allocate
+ * MMIO space for this bus. VMBus itself knows which ranges are
+ * appropriate by looking at its own ACPI objects. Then, after
+ * these ranges are claimed, they're modified to look like they
+ * would have looked if the ACPI and pnp code had allocated
+ * bridge windows. These descriptors have to exist in this form
+ * in order to satisfy the code which will get invoked when the
+ * endpoint PCI function driver calls request_mem_region() or
+ * request_mem_region_exclusive().
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_pci_allocate_bridge_windows(struct hv_pcibus_device *hbus)
+{
+ resource_size_t align;
+ int ret;
+
+ if (hbus->low_mmio_space) {
+ align = 1ULL << (63 - __builtin_clzll(hbus->low_mmio_space));
+ ret = vmbus_allocate_mmio(&hbus->low_mmio_res, hbus->hdev, 0,
+ (u64)(u32)0xffffffff,
+ hbus->low_mmio_space,
+ align, false);
+ if (ret) {
+ dev_err(&hbus->hdev->device,
+ "Need %#llx of low MMIO space. Consider reconfiguring the VM.\n",
+ hbus->low_mmio_space);
+ return ret;
+ }
+
+ /* Modify this resource to become a bridge window. */
+ hbus->low_mmio_res->flags |= IORESOURCE_WINDOW;
+ hbus->low_mmio_res->flags &= ~IORESOURCE_BUSY;
+ pci_add_resource(&hbus->resources_for_children,
+ hbus->low_mmio_res);
+ }
+
+ if (hbus->high_mmio_space) {
+ align = 1ULL << (63 - __builtin_clzll(hbus->high_mmio_space));
+ ret = vmbus_allocate_mmio(&hbus->high_mmio_res, hbus->hdev,
+ 0x100000000, -1,
+ hbus->high_mmio_space, align,
+ false);
+ if (ret) {
+ dev_err(&hbus->hdev->device,
+ "Need %#llx of high MMIO space. Consider reconfiguring the VM.\n",
+ hbus->high_mmio_space);
+ goto release_low_mmio;
+ }
+
+ /* Modify this resource to become a bridge window. */
+ hbus->high_mmio_res->flags |= IORESOURCE_WINDOW;
+ hbus->high_mmio_res->flags &= ~IORESOURCE_BUSY;
+ pci_add_resource(&hbus->resources_for_children,
+ hbus->high_mmio_res);
+ }
+
+ return 0;
+
+release_low_mmio:
+ if (hbus->low_mmio_res) {
+ release_mem_region(hbus->low_mmio_res->start,
+ resource_size(hbus->low_mmio_res));
+ }
+
+ return ret;
+}
+
+/**
+ * hv_allocate_config_window() - Find MMIO space for PCI Config
+ * @hbus: Root PCI bus, as understood by this driver
+ *
+ * This function claims memory-mapped I/O space for accessing
+ * configuration space for the functions on this bus.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_allocate_config_window(struct hv_pcibus_device *hbus)
+{
+ int ret;
+
+ /*
+ * Set up a region of MMIO space to use for accessing configuration
+ * space.
+ */
+ ret = vmbus_allocate_mmio(&hbus->mem_config, hbus->hdev, 0, -1,
+ PCI_CONFIG_MMIO_LENGTH, 0x1000, false);
+ if (ret)
+ return ret;
+
+ /*
+ * vmbus_allocate_mmio() gets used for allocating both device endpoint
+ * resource claims (those which cannot be overlapped) and the ranges
+ * which are valid for the children of this bus, which are intended
+ * to be overlapped by those children. Set the flag on this claim
+ * meaning that this region can't be overlapped.
+ */
+
+ hbus->mem_config->flags |= IORESOURCE_BUSY;
+
+ return 0;
+}
+
+static void hv_free_config_window(struct hv_pcibus_device *hbus)
+{
+ release_mem_region(hbus->mem_config->start, PCI_CONFIG_MMIO_LENGTH);
+}
+
+/**
+ * hv_pci_enter_d0() - Bring the "bus" into the D0 power state
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_pci_enter_d0(struct hv_device *hdev)
+{
+ struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
+ struct pci_bus_d0_entry *d0_entry;
+ struct hv_pci_compl comp_pkt;
+ struct pci_packet *pkt;
+ int ret;
+
+ /*
+ * Tell the host that the bus is ready to use, and moved into the
+ * powered-on state. This includes telling the host which region
+ * of memory-mapped I/O space has been chosen for configuration space
+ * access.
+ */
+ pkt = kzalloc(sizeof(*pkt) + sizeof(*d0_entry), GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
+ init_completion(&comp_pkt.host_event);
+ pkt->completion_func = hv_pci_generic_compl;
+ pkt->compl_ctxt = &comp_pkt;
+ d0_entry = (struct pci_bus_d0_entry *)&pkt->message;
+ d0_entry->message_type.message_type = PCI_BUS_D0ENTRY;
+ d0_entry->mmio_base = hbus->mem_config->start;
+
+ ret = vmbus_sendpacket(hdev->channel, d0_entry, sizeof(*d0_entry),
+ (unsigned long)pkt, VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ goto exit;
+
+ wait_for_completion(&comp_pkt.host_event);
+
+ if (comp_pkt.completion_status < 0) {
+ dev_err(&hdev->device,
+ "PCI Pass-through VSP failed D0 Entry with status %x\n",
+ comp_pkt.completion_status);
+ ret = -EPROTO;
+ goto exit;
+ }
+
+ ret = 0;
+
+exit:
+ kfree(pkt);
+ return ret;
+}
+
+/**
+ * hv_pci_query_relations() - Ask host to send list of child
+ * devices
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_pci_query_relations(struct hv_device *hdev)
+{
+ struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
+ struct pci_message message;
+ struct completion comp;
+ int ret;
+
+ /* Ask the host to send along the list of child devices */
+ init_completion(&comp);
+ if (cmpxchg(&hbus->survey_event, NULL, &comp))
+ return -ENOTEMPTY;
+
+ memset(&message, 0, sizeof(message));
+ message.message_type = PCI_QUERY_BUS_RELATIONS;
+
+ ret = vmbus_sendpacket(hdev->channel, &message, sizeof(message),
+ 0, VM_PKT_DATA_INBAND, 0);
+ if (ret)
+ return ret;
+
+ wait_for_completion(&comp);
+ return 0;
+}
+
+/**
+ * hv_send_resources_allocated() - Report local resource choices
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * The host OS is expecting to be sent a request as a message
+ * which contains all the resources that the device will use.
+ * The response contains those same resources, "translated"
+ * which is to say, the values which should be used by the
+ * hardware, when it delivers an interrupt. (MMIO resources are
+ * used in local terms.) This is nice for Windows, and lines up
+ * with the FDO/PDO split, which doesn't exist in Linux. Linux
+ * is deeply expecting to scan an emulated PCI configuration
+ * space. So this message is sent here only to drive the state
+ * machine on the host forward.
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_send_resources_allocated(struct hv_device *hdev)
+{
+ struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
+ struct pci_resources_assigned *res_assigned;
+ struct hv_pci_compl comp_pkt;
+ struct hv_pci_dev *hpdev;
+ struct pci_packet *pkt;
+ u32 wslot;
+ int ret;
+
+ pkt = kmalloc(sizeof(*pkt) + sizeof(*res_assigned), GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
+ ret = 0;
+
+ for (wslot = 0; wslot < 256; wslot++) {
+ hpdev = get_pcichild_wslot(hbus, wslot);
+ if (!hpdev)
+ continue;
+
+ memset(pkt, 0, sizeof(*pkt) + sizeof(*res_assigned));
+ init_completion(&comp_pkt.host_event);
+ pkt->completion_func = hv_pci_generic_compl;
+ pkt->compl_ctxt = &comp_pkt;
+ pkt->message.message_type = PCI_RESOURCES_ASSIGNED;
+ res_assigned = (struct pci_resources_assigned *)&pkt->message;
+ res_assigned->wslot.slot = hpdev->desc.win_slot.slot;
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+
+ ret = vmbus_sendpacket(
+ hdev->channel, &pkt->message,
+ sizeof(*res_assigned),
+ (unsigned long)pkt,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (ret)
+ break;
+
+ wait_for_completion(&comp_pkt.host_event);
+
+ if (comp_pkt.completion_status < 0) {
+ ret = -EPROTO;
+ dev_err(&hdev->device,
+ "resource allocated returned 0x%x",
+ comp_pkt.completion_status);
+ break;
+ }
+ }
+
+ kfree(pkt);
+ return ret;
+}
+
+/**
+ * hv_send_resources_released() - Report local resources
+ * released
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_send_resources_released(struct hv_device *hdev)
+{
+ struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
+ struct pci_child_message pkt;
+ struct hv_pci_dev *hpdev;
+ u32 wslot;
+ int ret;
+
+ for (wslot = 0; wslot < 256; wslot++) {
+ hpdev = get_pcichild_wslot(hbus, wslot);
+ if (!hpdev)
+ continue;
+
+ memset(&pkt, 0, sizeof(pkt));
+ pkt.message_type = PCI_RESOURCES_RELEASED;
+ pkt.wslot.slot = hpdev->desc.win_slot.slot;
+
+ put_pcichild(hpdev, hv_pcidev_ref_by_slot);
+
+ ret = vmbus_sendpacket(hdev->channel, &pkt, sizeof(pkt), 0,
+ VM_PKT_DATA_INBAND, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void get_hvpcibus(struct hv_pcibus_device *hbus)
+{
+ atomic_inc(&hbus->remove_lock);
+}
+
+static void put_hvpcibus(struct hv_pcibus_device *hbus)
+{
+ if (atomic_dec_and_test(&hbus->remove_lock))
+ complete(&hbus->remove_event);
+}
+
+/**
+ * hv_pci_probe() - New VMBus channel probe, for a root PCI bus
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ * @dev_id: Identifies the device itself
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_pci_probe(struct hv_device *hdev,
+ const struct hv_vmbus_device_id *dev_id)
+{
+ struct hv_pcibus_device *hbus;
+ int ret;
+
+ hbus = kzalloc(sizeof(*hbus), GFP_KERNEL);
+ if (!hbus)
+ return -ENOMEM;
+
+ /*
+ * The PCI bus "domain" is what is called "segment" in ACPI and
+ * other specs. Pull it from the instance ID, to get something
+ * unique. Bytes 8 and 9 are what is used in Windows guests, so
+ * do the same thing for consistency. Note that, since this code
+ * only runs in a Hyper-V VM, Hyper-V can (and does) guarantee
+ * that (1) the only domain in use for something that looks like
+ * a physical PCI bus (which is actually emulated by the
+ * hypervisor) is domain 0 and (2) there will be no overlap
+ * between domains derived from these instance IDs in the same
+ * VM.
+ */
+ hbus->sysdata.domain = hdev->dev_instance.b[9] |
+ hdev->dev_instance.b[8] << 8;
+
+ hbus->hdev = hdev;
+ atomic_inc(&hbus->remove_lock);
+ INIT_LIST_HEAD(&hbus->children);
+ INIT_LIST_HEAD(&hbus->dr_list);
+ INIT_LIST_HEAD(&hbus->resources_for_children);
+ spin_lock_init(&hbus->config_lock);
+ spin_lock_init(&hbus->device_list_lock);
+ sema_init(&hbus->enum_sem, 1);
+ init_completion(&hbus->remove_event);
+
+ ret = vmbus_open(hdev->channel, pci_ring_size, pci_ring_size, NULL, 0,
+ hv_pci_onchannelcallback, hbus);
+ if (ret)
+ goto free_bus;
+
+ hv_set_drvdata(hdev, hbus);
+
+ ret = hv_pci_protocol_negotiation(hdev);
+ if (ret)
+ goto close;
+
+ ret = hv_allocate_config_window(hbus);
+ if (ret)
+ goto close;
+
+ hbus->cfg_addr = ioremap(hbus->mem_config->start,
+ PCI_CONFIG_MMIO_LENGTH);
+ if (!hbus->cfg_addr) {
+ dev_err(&hdev->device,
+ "Unable to map a virtual address for config space\n");
+ ret = -ENOMEM;
+ goto free_config;
+ }
+
+ hbus->sysdata.fwnode = irq_domain_alloc_fwnode(hbus);
+ if (!hbus->sysdata.fwnode) {
+ ret = -ENOMEM;
+ goto unmap;
+ }
+
+ ret = hv_pcie_init_irq_domain(hbus);
+ if (ret)
+ goto free_fwnode;
+
+ ret = hv_pci_query_relations(hdev);
+ if (ret)
+ goto free_irq_domain;
+
+ ret = hv_pci_enter_d0(hdev);
+ if (ret)
+ goto free_irq_domain;
+
+ ret = hv_pci_allocate_bridge_windows(hbus);
+ if (ret)
+ goto free_irq_domain;
+
+ ret = hv_send_resources_allocated(hdev);
+ if (ret)
+ goto free_windows;
+
+ prepopulate_bars(hbus);
+
+ hbus->state = hv_pcibus_probed;
+
+ ret = create_root_hv_pci_bus(hbus);
+ if (ret)
+ goto free_windows;
+
+ return 0;
+
+free_windows:
+ hv_pci_free_bridge_windows(hbus);
+free_irq_domain:
+ irq_domain_remove(hbus->irq_domain);
+free_fwnode:
+ irq_domain_free_fwnode(hbus->sysdata.fwnode);
+unmap:
+ iounmap(hbus->cfg_addr);
+free_config:
+ hv_free_config_window(hbus);
+close:
+ vmbus_close(hdev->channel);
+free_bus:
+ kfree(hbus);
+ return ret;
+}
+
+/**
+ * hv_pci_remove() - Remove routine for this VMBus channel
+ * @hdev: VMBus's tracking struct for this root PCI bus
+ *
+ * Return: 0 on success, -errno on failure
+ */
+static int hv_pci_remove(struct hv_device *hdev)
+{
+ int ret;
+ struct hv_pcibus_device *hbus;
+ union {
+ struct pci_packet teardown_packet;
+ u8 buffer[0x100];
+ } pkt;
+ struct pci_bus_relations relations;
+ struct hv_pci_compl comp_pkt;
+
+ hbus = hv_get_drvdata(hdev);
+
+ ret = hv_send_resources_released(hdev);
+ if (ret)
+ dev_err(&hdev->device,
+ "Couldn't send resources released packet(s)\n");
+
+ memset(&pkt.teardown_packet, 0, sizeof(pkt.teardown_packet));
+ init_completion(&comp_pkt.host_event);
+ pkt.teardown_packet.completion_func = hv_pci_generic_compl;
+ pkt.teardown_packet.compl_ctxt = &comp_pkt;
+ pkt.teardown_packet.message.message_type = PCI_BUS_D0EXIT;
+
+ ret = vmbus_sendpacket(hdev->channel, &pkt.teardown_packet.message,
+ sizeof(struct pci_message),
+ (unsigned long)&pkt.teardown_packet,
+ VM_PKT_DATA_INBAND,
+ VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED);
+ if (!ret)
+ wait_for_completion_timeout(&comp_pkt.host_event, 10 * HZ);
+
+ if (hbus->state == hv_pcibus_installed) {
+ /* Remove the bus from PCI's point of view. */
+ pci_lock_rescan_remove();
+ pci_stop_root_bus(hbus->pci_bus);
+ pci_remove_root_bus(hbus->pci_bus);
+ pci_unlock_rescan_remove();
+ }
+
+ vmbus_close(hdev->channel);
+
+ /* Delete any children which might still exist. */
+ memset(&relations, 0, sizeof(relations));
+ hv_pci_devices_present(hbus, &relations);
+
+ iounmap(hbus->cfg_addr);
+ hv_free_config_window(hbus);
+ pci_free_resource_list(&hbus->resources_for_children);
+ hv_pci_free_bridge_windows(hbus);
+ irq_domain_remove(hbus->irq_domain);
+ irq_domain_free_fwnode(hbus->sysdata.fwnode);
+ put_hvpcibus(hbus);
+ wait_for_completion(&hbus->remove_event);
+ kfree(hbus);
+ return 0;
+}
+
+static const struct hv_vmbus_device_id hv_pci_id_table[] = {
+ /* PCI Pass-through Class ID */
+ /* 44C4F61D-4444-4400-9D52-802E27EDE19F */
+ { HV_PCIE_GUID, },
+ { },
+};
+
+MODULE_DEVICE_TABLE(vmbus, hv_pci_id_table);
+
+static struct hv_driver hv_pci_drv = {
+ .name = "hv_pci",
+ .id_table = hv_pci_id_table,
+ .probe = hv_pci_probe,
+ .remove = hv_pci_remove,
+};
+
+static void __exit exit_hv_pci_drv(void)
+{
+ vmbus_driver_unregister(&hv_pci_drv);
+}
+
+static int __init init_hv_pci_drv(void)
+{
+ return vmbus_driver_register(&hv_pci_drv);
+}
+
+module_init(init_hv_pci_drv);
+module_exit(exit_hv_pci_drv);
+
+MODULE_DESCRIPTION("Hyper-V PCI");
+MODULE_LICENSE("GPL v2");
struct pcie_port pp;
struct regmap *iomuxc_gpr;
void __iomem *mem_base;
+ u32 tx_deemph_gen1;
+ u32 tx_deemph_gen2_3p5db;
+ u32 tx_deemph_gen2_6db;
+ u32 tx_swing_full;
+ u32 tx_swing_low;
};
/* PCIe Root Complex registers (memory-mapped) */
return 0;
}
+static void imx6_pcie_reset_phy(struct pcie_port *pp)
+{
+ u32 tmp;
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
+
+ usleep_range(2000, 3000);
+
+ pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
+ tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
+ PHY_RX_OVRD_IN_LO_RX_PLL_EN);
+ pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
+}
+
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
+ IMX6Q_GPR8_TX_DEEMPH_GEN1,
+ imx6_pcie->tx_deemph_gen1 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+ imx6_pcie->tx_deemph_gen2_3p5db << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+ imx6_pcie->tx_deemph_gen2_6db << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
+ IMX6Q_GPR8_TX_SWING_FULL,
+ imx6_pcie->tx_swing_full << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
- IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
+ IMX6Q_GPR8_TX_SWING_LOW,
+ imx6_pcie->tx_swing_low << 25);
}
static int imx6_pcie_wait_for_link(struct pcie_port *pp)
{
- unsigned int retries;
-
- for (retries = 0; retries < 200; retries++) {
- if (dw_pcie_link_up(pp))
- return 0;
- usleep_range(100, 1000);
- }
+ /* check if the link is up or not */
+ if (!dw_pcie_wait_for_link(pp))
+ return 0;
- dev_err(pp->dev, "phy link never came up\n");
dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
- return -EINVAL;
+ return -ETIMEDOUT;
}
static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
ret = imx6_pcie_wait_for_link(pp);
- if (ret)
- return ret;
+ if (ret) {
+ dev_info(pp->dev, "Link never came up\n");
+ goto err_reset_phy;
+ }
/* Allow Gen2 mode after the link is up. */
tmp = readl(pp->dbi_base + PCIE_RC_LCR);
ret = imx6_pcie_wait_for_speed_change(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
- return ret;
+ goto err_reset_phy;
}
/* Make sure link training is finished as well! */
ret = imx6_pcie_wait_for_link(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
- return ret;
+ goto err_reset_phy;
}
tmp = readl(pp->dbi_base + PCIE_RC_LCSR);
dev_dbg(pp->dev, "Link up, Gen=%i\n", (tmp >> 16) & 0xf);
+
return 0;
+
+err_reset_phy:
+ dev_dbg(pp->dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+ imx6_pcie_reset_phy(pp);
+
+ return ret;
}
static void imx6_pcie_host_init(struct pcie_port *pp)
dw_pcie_msi_init(pp);
}
-static void imx6_pcie_reset_phy(struct pcie_port *pp)
-{
- u32 tmp;
-
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
- tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
- PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
-
- usleep_range(2000, 3000);
-
- pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
- tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
- PHY_RX_OVRD_IN_LO_RX_PLL_EN);
- pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
-}
-
static int imx6_pcie_link_up(struct pcie_port *pp)
{
- u32 rc, debug_r0, rx_valid;
- int count = 5;
-
- /*
- * Test if the PHY reports that the link is up and also that the LTSSM
- * training finished. There are three possible states of the link when
- * this code is called:
- * 1) The link is DOWN (unlikely)
- * The link didn't come up yet for some reason. This usually means
- * we have a real problem somewhere. Reset the PHY and exit. This
- * state calls for inspection of the DEBUG registers.
- * 2) The link is UP, but still in LTSSM training
- * Wait for the training to finish, which should take a very short
- * time. If the training does not finish, we have a problem and we
- * need to inspect the DEBUG registers. If the training does finish,
- * the link is up and operating correctly.
- * 3) The link is UP and no longer in LTSSM training
- * The link is up and operating correctly.
- */
- while (1) {
- rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
- if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP))
- break;
- if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
- return 1;
- if (!count--)
- break;
- dev_dbg(pp->dev, "Link is up, but still in training\n");
- /*
- * Wait a little bit, then re-check if the link finished
- * the training.
- */
- usleep_range(1000, 2000);
- }
- /*
- * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
- * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
- * If (MAC/LTSSM.state == Recovery.RcvrLock)
- * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
- * to gen2 is stuck
- */
- pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
- debug_r0 = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0);
-
- if (rx_valid & PCIE_PHY_RX_ASIC_OUT_VALID)
- return 0;
-
- if ((debug_r0 & 0x3f) != 0x0d)
- return 0;
-
- dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
- dev_dbg(pp->dev, "debug_r0=%08x debug_r1=%08x\n", debug_r0, rc);
-
- imx6_pcie_reset_phy(pp);
-
- return 0;
+ return readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) &
+ PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
}
static struct pcie_host_ops imx6_pcie_host_ops = {
struct imx6_pcie *imx6_pcie;
struct pcie_port *pp;
struct resource *dbi_base;
+ struct device_node *node = pdev->dev.of_node;
int ret;
imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
return PTR_ERR(imx6_pcie->iomuxc_gpr);
}
+ /* Grab PCIe PHY Tx Settings */
+ if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
+ &imx6_pcie->tx_deemph_gen1))
+ imx6_pcie->tx_deemph_gen1 = 0;
+
+ if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
+ &imx6_pcie->tx_deemph_gen2_3p5db))
+ imx6_pcie->tx_deemph_gen2_3p5db = 0;
+
+ if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
+ &imx6_pcie->tx_deemph_gen2_6db))
+ imx6_pcie->tx_deemph_gen2_6db = 20;
+
+ if (of_property_read_u32(node, "fsl,tx-swing-full",
+ &imx6_pcie->tx_swing_full))
+ imx6_pcie->tx_swing_full = 127;
+
+ if (of_property_read_u32(node, "fsl,tx-swing-low",
+ &imx6_pcie->tx_swing_low))
+ imx6_pcie->tx_swing_low = 127;
+
ret = imx6_add_pcie_port(pp, pdev);
if (ret < 0)
return ret;
return 0;
}
- ks_dw_pcie_initiate_link_train(ks_pcie);
/* check if the link is up or not */
- for (retries = 0; retries < 200; retries++) {
- if (dw_pcie_link_up(pp))
- return 0;
- usleep_range(100, 1000);
+ for (retries = 0; retries < 5; retries++) {
ks_dw_pcie_initiate_link_train(ks_pcie);
+ if (!dw_pcie_wait_for_link(pp))
+ return 0;
}
dev_err(pp->dev, "phy link never came up\n");
- return -EINVAL;
+ return -ETIMEDOUT;
}
static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
/* initialize SerDes Phy if present */
phy = devm_phy_get(dev, "pcie-phy");
+ if (PTR_ERR_OR_ZERO(phy) == -EPROBE_DEFER)
+ return PTR_ERR(phy);
+
if (!IS_ERR_OR_NULL(phy)) {
ret = phy_init(phy);
if (ret < 0)
{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+ { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
{ },
};
MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
struct resource prefetch;
struct resource busn;
+ struct {
+ resource_size_t mem;
+ resource_size_t io;
+ } offset;
+
struct clk *pex_clk;
struct clk *afi_clk;
struct clk *pll_e;
struct tegra_msi msi;
struct list_head ports;
- unsigned int num_ports;
u32 xbar_config;
struct regulator_bulk_data *supplies;
return ERR_PTR(err);
}
-/*
- * Look up a virtual address mapping for the specified bus number. If no such
- * mapping exists, try to create one.
- */
-static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
- unsigned int busnr)
+static int tegra_pcie_add_bus(struct pci_bus *bus)
{
- struct tegra_pcie_bus *bus;
+ struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+ struct tegra_pcie_bus *b;
- list_for_each_entry(bus, &pcie->buses, list)
- if (bus->nr == busnr)
- return (void __iomem *)bus->area->addr;
+ b = tegra_pcie_bus_alloc(pcie, bus->number);
+ if (IS_ERR(b))
+ return PTR_ERR(b);
- bus = tegra_pcie_bus_alloc(pcie, busnr);
- if (IS_ERR(bus))
- return NULL;
+ list_add_tail(&b->list, &pcie->buses);
- list_add_tail(&bus->list, &pcie->buses);
+ return 0;
+}
- return (void __iomem *)bus->area->addr;
+static void tegra_pcie_remove_bus(struct pci_bus *child)
+{
+ struct tegra_pcie *pcie = sys_to_pcie(child->sysdata);
+ struct tegra_pcie_bus *bus, *tmp;
+
+ list_for_each_entry_safe(bus, tmp, &pcie->buses, list) {
+ if (bus->nr == child->number) {
+ vunmap(bus->area->addr);
+ list_del(&bus->list);
+ kfree(bus);
+ break;
+ }
+ }
}
-static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus,
- unsigned int devfn,
- int where)
+static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
+ unsigned int devfn,
+ int where)
{
struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
void __iomem *addr = NULL;
}
}
} else {
- addr = tegra_pcie_bus_map(pcie, bus->number);
+ struct tegra_pcie_bus *b;
+
+ list_for_each_entry(b, &pcie->buses, list)
+ if (b->nr == bus->number)
+ addr = (void __iomem *)b->area->addr;
+
if (!addr) {
dev_err(pcie->dev,
"failed to map cfg. space for bus %u\n",
}
static struct pci_ops tegra_pcie_ops = {
- .map_bus = tegra_pcie_conf_address,
+ .add_bus = tegra_pcie_add_bus,
+ .remove_bus = tegra_pcie_remove_bus,
+ .map_bus = tegra_pcie_map_bus,
.read = pci_generic_config_read32,
.write = pci_generic_config_write32,
};
struct tegra_pcie *pcie = sys_to_pcie(sys);
int err;
+ sys->mem_offset = pcie->offset.mem;
+ sys->io_offset = pcie->offset.io;
+
+ err = devm_request_resource(pcie->dev, &pcie->all, &pcie->io);
+ if (err < 0)
+ return err;
+
+ err = devm_request_resource(pcie->dev, &ioport_resource, &pcie->pio);
+ if (err < 0)
+ return err;
+
err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
if (err < 0)
return err;
if (err)
return err;
+ pci_add_resource_offset(&sys->resources, &pcie->pio, sys->io_offset);
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->prefetch,
sys->mem_offset);
afi_writel(pcie, 0, AFI_FPCI_BAR5);
/* map all upstream transactions as uncached */
- afi_writel(pcie, PHYS_OFFSET, AFI_CACHE_BAR0_ST);
+ afi_writel(pcie, 0, AFI_CACHE_BAR0_ST);
afi_writel(pcie, 0, AFI_CACHE_BAR0_SZ);
afi_writel(pcie, 0, AFI_CACHE_BAR1_ST);
afi_writel(pcie, 0, AFI_CACHE_BAR1_SZ);
switch (res.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
+ /* Track the bus -> CPU I/O mapping offset. */
+ pcie->offset.io = res.start - range.pci_addr;
+
memcpy(&pcie->pio, &res, sizeof(res));
pcie->pio.name = np->full_name;
break;
case IORESOURCE_MEM:
+ /*
+ * Track the bus -> CPU memory mapping offset. This
+ * assumes that the prefetchable and non-prefetchable
+ * regions will be the last of type IORESOURCE_MEM in
+ * the ranges property.
+ * */
+ pcie->offset.mem = res.start - range.pci_addr;
+
if (res.flags & IORESOURCE_PREFETCH) {
memcpy(&pcie->prefetch, &res, sizeof(res));
pcie->prefetch.name = "prefetchable";
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2015, 2016 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/of_pci.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+/* Mapping is standard ECAM */
+static void __iomem *thunder_ecam_map_bus(struct pci_bus *bus,
+ unsigned int devfn,
+ int where)
+{
+ struct gen_pci *pci = bus->sysdata;
+ resource_size_t idx = bus->number - pci->cfg.bus_range->start;
+
+ return pci->cfg.win[idx] + ((devfn << 12) | where);
+}
+
+static void set_val(u32 v, int where, int size, u32 *val)
+{
+ int shift = (where & 3) * 8;
+
+ pr_debug("set_val %04x: %08x\n", (unsigned)(where & ~3), v);
+ v >>= shift;
+ if (size == 1)
+ v &= 0xff;
+ else if (size == 2)
+ v &= 0xffff;
+ *val = v;
+}
+
+static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val)
+{
+ void __iomem *addr;
+ u32 v;
+
+ /* Entries are 16-byte aligned; bits[2,3] select word in entry */
+ int where_a = where & 0xc;
+
+ if (where_a == 0) {
+ set_val(e0, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0x4) {
+ addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ v = readl(addr);
+ v &= ~0xf;
+ v |= 2; /* EA entry-1. Base-L */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0x8) {
+ u32 barl_orig;
+ u32 barl_rb;
+
+ addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ barl_orig = readl(addr + 0);
+ writel(0xffffffff, addr + 0);
+ barl_rb = readl(addr + 0);
+ writel(barl_orig, addr + 0);
+ /* zeros in unsettable bits */
+ v = ~barl_rb & ~3;
+ v |= 0xc; /* EA entry-2. Offset-L */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xc) {
+ addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ v = readl(addr); /* EA entry-3. Base-H */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct gen_pci *pci = bus->sysdata;
+ int where_a = where & ~3;
+ void __iomem *addr;
+ u32 node_bits;
+ u32 v;
+
+ /* EA Base[63:32] may be missing some bits ... */
+ switch (where_a) {
+ case 0xa8:
+ case 0xbc:
+ case 0xd0:
+ case 0xe4:
+ break;
+ default:
+ return pci_generic_config_read(bus, devfn, where, size, val);
+ }
+
+ addr = bus->ops->map_bus(bus, devfn, where_a);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ v = readl(addr);
+
+ /*
+ * Bit 44 of the 64-bit Base must match the same bit in
+ * the config space access window. Since we are working with
+ * the high-order 32 bits, shift everything down by 32 bits.
+ */
+ node_bits = (pci->cfg.res.start >> 32) & (1 << 12);
+
+ v |= node_bits;
+ set_val(v, where, size, val);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 v;
+ u32 vendor_device;
+ u32 class_rev;
+ void __iomem *addr;
+ int cfg_type;
+ int where_a = where & ~3;
+
+ addr = bus->ops->map_bus(bus, devfn, 0xc);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ v = readl(addr);
+
+ /* Check for non type-00 header */
+ cfg_type = (v >> 16) & 0x7f;
+
+ addr = bus->ops->map_bus(bus, devfn, 8);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ class_rev = readl(addr);
+ if (class_rev == 0xffffffff)
+ goto no_emulation;
+
+ if ((class_rev & 0xff) >= 8) {
+ /* Pass-2 handling */
+ if (cfg_type)
+ goto no_emulation;
+ return thunder_ecam_p2_config_read(bus, devfn, where,
+ size, val);
+ }
+
+ /*
+ * All BARs have fixed addresses specified by the EA
+ * capability; they must return zero on read.
+ */
+ if (cfg_type == 0 &&
+ ((where >= 0x10 && where < 0x2c) ||
+ (where >= 0x1a4 && where < 0x1bc))) {
+ /* BAR or SR-IOV BAR */
+ *val = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ addr = bus->ops->map_bus(bus, devfn, 0);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ vendor_device = readl(addr);
+ if (vendor_device == 0xffffffff)
+ goto no_emulation;
+
+ pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n",
+ vendor_device & 0xffff, vendor_device >> 16, class_rev,
+ (unsigned) where, devfn);
+
+ /* Check for non type-00 header */
+ if (cfg_type == 0) {
+ bool has_msix;
+ bool is_nic = (vendor_device == 0xa01e177d);
+ bool is_tns = (vendor_device == 0xa01f177d);
+
+ addr = bus->ops->map_bus(bus, devfn, 0x70);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ /* E_CAP */
+ v = readl(addr);
+ has_msix = (v & 0xff00) != 0;
+
+ if (!has_msix && where_a == 0x70) {
+ v |= 0xbc00; /* next capability is EA at 0xbc */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xb0) {
+ addr = bus->ops->map_bus(bus, devfn, where_a);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ v = readl(addr);
+ if (v & 0xff00)
+ pr_err("Bad MSIX cap header: %08x\n", v);
+ v |= 0xbc00; /* next capability is EA at 0xbc */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xbc) {
+ if (is_nic)
+ v = 0x40014; /* EA last in chain, 4 entries */
+ else if (is_tns)
+ v = 0x30014; /* EA last in chain, 3 entries */
+ else if (has_msix)
+ v = 0x20014; /* EA last in chain, 2 entries */
+ else
+ v = 0x10014; /* EA last in chain, 1 entry */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a >= 0xc0 && where_a < 0xd0)
+ /* EA entry-0. PP=0, BAR0 Size:3 */
+ return handle_ea_bar(0x80ff0003,
+ 0x10, bus, devfn, where,
+ size, val);
+ if (where_a >= 0xd0 && where_a < 0xe0 && has_msix)
+ /* EA entry-1. PP=0, BAR4 Size:3 */
+ return handle_ea_bar(0x80ff0043,
+ 0x20, bus, devfn, where,
+ size, val);
+ if (where_a >= 0xe0 && where_a < 0xf0 && is_tns)
+ /* EA entry-2. PP=0, BAR2, Size:3 */
+ return handle_ea_bar(0x80ff0023,
+ 0x18, bus, devfn, where,
+ size, val);
+ if (where_a >= 0xe0 && where_a < 0xf0 && is_nic)
+ /* EA entry-2. PP=4, VF_BAR0 (9), Size:3 */
+ return handle_ea_bar(0x80ff0493,
+ 0x1a4, bus, devfn, where,
+ size, val);
+ if (where_a >= 0xf0 && where_a < 0x100 && is_nic)
+ /* EA entry-3. PP=4, VF_BAR4 (d), Size:3 */
+ return handle_ea_bar(0x80ff04d3,
+ 0x1b4, bus, devfn, where,
+ size, val);
+ } else if (cfg_type == 1) {
+ bool is_rsl_bridge = devfn == 0x08;
+ bool is_rad_bridge = devfn == 0xa0;
+ bool is_zip_bridge = devfn == 0xa8;
+ bool is_dfa_bridge = devfn == 0xb0;
+ bool is_nic_bridge = devfn == 0x10;
+
+ if (where_a == 0x70) {
+ addr = bus->ops->map_bus(bus, devfn, where_a);
+ if (!addr) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ v = readl(addr);
+ if (v & 0xff00)
+ pr_err("Bad PCIe cap header: %08x\n", v);
+ v |= 0xbc00; /* next capability is EA at 0xbc */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xbc) {
+ if (is_nic_bridge)
+ v = 0x10014; /* EA last in chain, 1 entry */
+ else
+ v = 0x00014; /* EA last in chain, no entries */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xc0) {
+ if (is_rsl_bridge || is_nic_bridge)
+ v = 0x0101; /* subordinate:secondary = 1:1 */
+ else if (is_rad_bridge)
+ v = 0x0202; /* subordinate:secondary = 2:2 */
+ else if (is_zip_bridge)
+ v = 0x0303; /* subordinate:secondary = 3:3 */
+ else if (is_dfa_bridge)
+ v = 0x0404; /* subordinate:secondary = 4:4 */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xc4 && is_nic_bridge) {
+ /* Enabled, not-Write, SP=ff, PP=05, BEI=6, ES=4 */
+ v = 0x80ff0564;
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xc8 && is_nic_bridge) {
+ v = 0x00000002; /* Base-L 64-bit */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xcc && is_nic_bridge) {
+ v = 0xfffffffe; /* MaxOffset-L 64-bit */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xd0 && is_nic_bridge) {
+ v = 0x00008430; /* NIC Base-H */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ if (where_a == 0xd4 && is_nic_bridge) {
+ v = 0x0000000f; /* MaxOffset-H */
+ set_val(v, where, size, val);
+ return PCIBIOS_SUCCESSFUL;
+ }
+ }
+no_emulation:
+ return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ /*
+ * All BARs have fixed addresses; ignore BAR writes so they
+ * don't get corrupted.
+ */
+ if ((where >= 0x10 && where < 0x2c) ||
+ (where >= 0x1a4 && where < 0x1bc))
+ /* BAR or SR-IOV BAR */
+ return PCIBIOS_SUCCESSFUL;
+
+ return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static struct gen_pci_cfg_bus_ops thunder_ecam_bus_ops = {
+ .bus_shift = 20,
+ .ops = {
+ .map_bus = thunder_ecam_map_bus,
+ .read = thunder_ecam_config_read,
+ .write = thunder_ecam_config_write,
+ }
+};
+
+static const struct of_device_id thunder_ecam_of_match[] = {
+ { .compatible = "cavium,pci-host-thunder-ecam",
+ .data = &thunder_ecam_bus_ops },
+
+ { },
+};
+MODULE_DEVICE_TABLE(of, thunder_ecam_of_match);
+
+static int thunder_ecam_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+
+ if (!pci)
+ return -ENOMEM;
+
+ of_id = of_match_node(thunder_ecam_of_match, dev->of_node);
+ pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+
+ return pci_host_common_probe(pdev, pci);
+}
+
+static struct platform_driver thunder_ecam_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = thunder_ecam_of_match,
+ },
+ .probe = thunder_ecam_probe,
+};
+module_platform_driver(thunder_ecam_driver);
+
+MODULE_DESCRIPTION("Thunder ECAM PCI host driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2015 - 2016 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+#define PEM_CFG_WR 0x28
+#define PEM_CFG_RD 0x30
+
+struct thunder_pem_pci {
+ struct gen_pci gen_pci;
+ u32 ea_entry[3];
+ void __iomem *pem_reg_base;
+};
+
+static void __iomem *thunder_pem_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct gen_pci *pci = bus->sysdata;
+ resource_size_t idx = bus->number - pci->cfg.bus_range->start;
+
+ return pci->cfg.win[idx] + ((devfn << 16) | where);
+}
+
+static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u64 read_val;
+ struct thunder_pem_pci *pem_pci;
+ struct gen_pci *pci = bus->sysdata;
+
+ pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+ if (devfn != 0 || where >= 2048) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * 32-bit accesses only. Write the address to the low order
+ * bits of PEM_CFG_RD, then trigger the read by reading back.
+ * The config data lands in the upper 32-bits of PEM_CFG_RD.
+ */
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+
+ /*
+ * The config space contains some garbage, fix it up. Also
+ * synthesize an EA capability for the BAR used by MSI-X.
+ */
+ switch (where & ~3) {
+ case 0x40:
+ read_val &= 0xffff00ff;
+ read_val |= 0x00007000; /* Skip MSI CAP */
+ break;
+ case 0x70: /* Express Cap */
+ /* PME interrupt on vector 2*/
+ read_val |= (2u << 25);
+ break;
+ case 0xb0: /* MSI-X Cap */
+ /* TableSize=4, Next Cap is EA */
+ read_val &= 0xc00000ff;
+ read_val |= 0x0003bc00;
+ break;
+ case 0xb4:
+ /* Table offset=0, BIR=0 */
+ read_val = 0x00000000;
+ break;
+ case 0xb8:
+ /* BPA offset=0xf0000, BIR=0 */
+ read_val = 0x000f0000;
+ break;
+ case 0xbc:
+ /* EA, 1 entry, no next Cap */
+ read_val = 0x00010014;
+ break;
+ case 0xc0:
+ /* DW2 for type-1 */
+ read_val = 0x00000000;
+ break;
+ case 0xc4:
+ /* Entry BEI=0, PP=0x00, SP=0xff, ES=3 */
+ read_val = 0x80ff0003;
+ break;
+ case 0xc8:
+ read_val = pem_pci->ea_entry[0];
+ break;
+ case 0xcc:
+ read_val = pem_pci->ea_entry[1];
+ break;
+ case 0xd0:
+ read_val = pem_pci->ea_entry[2];
+ break;
+ default:
+ break;
+ }
+ read_val >>= (8 * (where & 3));
+ switch (size) {
+ case 1:
+ read_val &= 0xff;
+ break;
+ case 2:
+ read_val &= 0xffff;
+ break;
+ default:
+ break;
+ }
+ *val = read_val;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct gen_pci *pci = bus->sysdata;
+
+ if (bus->number < pci->cfg.bus_range->start ||
+ bus->number > pci->cfg.bus_range->end)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * The first device on the bus is the PEM PCIe bridge.
+ * Special case its config access.
+ */
+ if (bus->number == pci->cfg.bus_range->start)
+ return thunder_pem_bridge_read(bus, devfn, where, size, val);
+
+ return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+/*
+ * Some of the w1c_bits below also include read-only or non-writable
+ * reserved bits, this makes the code simpler and is OK as the bits
+ * are not affected by writing zeros to them.
+ */
+static u32 thunder_pem_bridge_w1c_bits(int where)
+{
+ u32 w1c_bits = 0;
+
+ switch (where & ~3) {
+ case 0x04: /* Command/Status */
+ case 0x1c: /* Base and I/O Limit/Secondary Status */
+ w1c_bits = 0xff000000;
+ break;
+ case 0x44: /* Power Management Control and Status */
+ w1c_bits = 0xfffffe00;
+ break;
+ case 0x78: /* Device Control/Device Status */
+ case 0x80: /* Link Control/Link Status */
+ case 0x88: /* Slot Control/Slot Status */
+ case 0x90: /* Root Status */
+ case 0xa0: /* Link Control 2 Registers/Link Status 2 */
+ w1c_bits = 0xffff0000;
+ break;
+ case 0x104: /* Uncorrectable Error Status */
+ case 0x110: /* Correctable Error Status */
+ case 0x130: /* Error Status */
+ case 0x160: /* Link Control 4 */
+ w1c_bits = 0xffffffff;
+ break;
+ default:
+ break;
+ }
+ return w1c_bits;
+}
+
+static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct gen_pci *pci = bus->sysdata;
+ struct thunder_pem_pci *pem_pci;
+ u64 write_val, read_val;
+ u32 mask = 0;
+
+ pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+ if (devfn != 0 || where >= 2048)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * 32-bit accesses only. If the write is for a size smaller
+ * than 32-bits, we must first read the 32-bit value and merge
+ * in the desired bits and then write the whole 32-bits back
+ * out.
+ */
+ switch (size) {
+ case 1:
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+ mask = ~(0xff << (8 * (where & 3)));
+ read_val &= mask;
+ val = (val & 0xff) << (8 * (where & 3));
+ val |= (u32)read_val;
+ break;
+ case 2:
+ read_val = where & ~3ull;
+ writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+ read_val >>= 32;
+ mask = ~(0xffff << (8 * (where & 3)));
+ read_val &= mask;
+ val = (val & 0xffff) << (8 * (where & 3));
+ val |= (u32)read_val;
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * By expanding the write width to 32 bits, we may
+ * inadvertently hit some W1C bits that were not intended to
+ * be written. Calculate the mask that must be applied to the
+ * data to be written to avoid these cases.
+ */
+ if (mask) {
+ u32 w1c_bits = thunder_pem_bridge_w1c_bits(where);
+
+ if (w1c_bits) {
+ mask &= w1c_bits;
+ val &= ~mask;
+ }
+ }
+
+ /*
+ * Low order bits are the config address, the high order 32
+ * bits are the data to be written.
+ */
+ write_val = where & ~3ull;
+ write_val |= (((u64)val) << 32);
+ writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ struct gen_pci *pci = bus->sysdata;
+
+ if (bus->number < pci->cfg.bus_range->start ||
+ bus->number > pci->cfg.bus_range->end)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * The first device on the bus is the PEM PCIe bridge.
+ * Special case its config access.
+ */
+ if (bus->number == pci->cfg.bus_range->start)
+ return thunder_pem_bridge_write(bus, devfn, where, size, val);
+
+
+ return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static struct gen_pci_cfg_bus_ops thunder_pem_bus_ops = {
+ .bus_shift = 24,
+ .ops = {
+ .map_bus = thunder_pem_map_bus,
+ .read = thunder_pem_config_read,
+ .write = thunder_pem_config_write,
+ }
+};
+
+static const struct of_device_id thunder_pem_of_match[] = {
+ { .compatible = "cavium,pci-host-thunder-pem",
+ .data = &thunder_pem_bus_ops },
+
+ { },
+};
+MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
+
+static int thunder_pem_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *of_id;
+ resource_size_t bar4_start;
+ struct resource *res_pem;
+ struct thunder_pem_pci *pem_pci;
+
+ pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
+ if (!pem_pci)
+ return -ENOMEM;
+
+ of_id = of_match_node(thunder_pem_of_match, dev->of_node);
+ pem_pci->gen_pci.cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+
+ /*
+ * The second register range is the PEM bridge to the PCIe
+ * bus. It has a different config access method than those
+ * devices behind the bridge.
+ */
+ res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res_pem) {
+ dev_err(dev, "missing \"reg[1]\"property\n");
+ return -EINVAL;
+ }
+
+ pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000);
+ if (!pem_pci->pem_reg_base)
+ return -ENOMEM;
+
+ /*
+ * The MSI-X BAR for the PEM and AER interrupts is located at
+ * a fixed offset from the PEM register base. Generate a
+ * fragment of the synthesized Enhanced Allocation capability
+ * structure here for the BAR.
+ */
+ bar4_start = res_pem->start + 0xf00000;
+ pem_pci->ea_entry[0] = (u32)bar4_start | 2;
+ pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u;
+ pem_pci->ea_entry[2] = (u32)(bar4_start >> 32);
+
+ return pci_host_common_probe(pdev, &pem_pci->gen_pci);
+}
+
+static struct platform_driver thunder_pem_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = thunder_pem_of_match,
+ },
+ .probe = thunder_pem_probe,
+};
+module_platform_driver(thunder_pem_driver);
+
+MODULE_DESCRIPTION("Thunder PEM PCIe host driver");
+MODULE_LICENSE("GPL v2");
#define P2A_INT_ENABLE 0x3070
#define P2A_INT_ENA_ALL 0xf
#define RP_LTSSM 0x3c64
+#define RP_LTSSM_MASK 0x1f
#define LTSSM_L0 0xf
/* TLP configuration type 0 and 1 */
static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
{
- return !!(cra_readl(pcie, RP_LTSSM) & LTSSM_L0);
+ return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
}
static bool altera_pcie_valid_config(struct altera_pcie *pcie,
--- /dev/null
+/*
+ * PCIe RC driver for Synopsys DesignWare Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+struct dw_plat_pcie {
+ void __iomem *mem_base;
+ struct pcie_port pp;
+};
+
+static irqreturn_t dw_plat_pcie_msi_irq_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+
+ return dw_handle_msi_irq(pp);
+}
+
+static void dw_plat_pcie_host_init(struct pcie_port *pp)
+{
+ dw_pcie_setup_rc(pp);
+ dw_pcie_wait_for_link(pp);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+}
+
+static struct pcie_host_ops dw_plat_pcie_host_ops = {
+ .host_init = dw_plat_pcie_host_init,
+};
+
+static int dw_plat_add_pcie_port(struct pcie_port *pp,
+ struct platform_device *pdev)
+{
+ int ret;
+
+ pp->irq = platform_get_irq(pdev, 1);
+ if (pp->irq < 0)
+ return pp->irq;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ pp->msi_irq = platform_get_irq(pdev, 0);
+ if (pp->msi_irq < 0)
+ return pp->msi_irq;
+
+ ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+ dw_plat_pcie_msi_irq_handler,
+ IRQF_SHARED, "dw-plat-pcie-msi", pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request MSI IRQ\n");
+ return ret;
+ }
+ }
+
+ pp->root_bus_nr = -1;
+ pp->ops = &dw_plat_pcie_host_ops;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dw_plat_pcie_probe(struct platform_device *pdev)
+{
+ struct dw_plat_pcie *dw_plat_pcie;
+ struct pcie_port *pp;
+ struct resource *res; /* Resource from DT */
+ int ret;
+
+ dw_plat_pcie = devm_kzalloc(&pdev->dev, sizeof(*dw_plat_pcie),
+ GFP_KERNEL);
+ if (!dw_plat_pcie)
+ return -ENOMEM;
+
+ pp = &dw_plat_pcie->pp;
+ pp->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ dw_plat_pcie->mem_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dw_plat_pcie->mem_base))
+ return PTR_ERR(dw_plat_pcie->mem_base);
+
+ pp->dbi_base = dw_plat_pcie->mem_base;
+
+ ret = dw_plat_add_pcie_port(pp, pdev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, dw_plat_pcie);
+ return 0;
+}
+
+static const struct of_device_id dw_plat_pcie_of_match[] = {
+ { .compatible = "snps,dw-pcie", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_plat_pcie_of_match);
+
+static struct platform_driver dw_plat_pcie_driver = {
+ .driver = {
+ .name = "dw-pcie",
+ .of_match_table = dw_plat_pcie_of_match,
+ },
+ .probe = dw_plat_pcie_probe,
+};
+
+module_platform_driver(dw_plat_pcie_driver);
+
+MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys PCIe host controller glue platform driver");
+MODULE_LICENSE("GPL v2");
#include <linux/pci_regs.h>
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/delay.h>
#include "pcie-designware.h"
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
+/* PCIe Port Logic registers */
+#define PLR_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
+#define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010
+
static struct pci_ops dw_pcie_ops;
int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val)
.teardown_irq = dw_msi_teardown_irq,
};
+int dw_pcie_wait_for_link(struct pcie_port *pp)
+{
+ int retries;
+
+ /* check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (dw_pcie_link_up(pp)) {
+ dev_info(pp->dev, "link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ dev_err(pp->dev, "phy link never came up\n");
+
+ return -ETIMEDOUT;
+}
+
int dw_pcie_link_up(struct pcie_port *pp)
{
+ u32 val;
+
if (pp->ops->link_up)
return pp->ops->link_up(pp);
- return 0;
+ val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
+ return val & PCIE_PHY_DEBUG_R1_LINK_UP;
}
static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
if (pp->ops->host_init)
pp->ops->host_init(pp);
+ /*
+ * If the platform provides ->rd_other_conf, it means the platform
+ * uses its own address translation component rather than ATU, so
+ * we should not program the ATU here.
+ */
if (!pp->ops->rd_other_conf)
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
PCIE_ATU_TYPE_MEM, pp->mem_base,
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
#endif
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
- }
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
return 0;
#define MAX_MSI_IRQS 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32)
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
+int dw_pcie_wait_for_link(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
static int qcom_pcie_establish_link(struct qcom_pcie *pcie)
{
- struct device *dev = pcie->dev;
- unsigned int retries = 0;
u32 val;
if (dw_pcie_link_up(&pcie->pp))
val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE;
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
- do {
- if (dw_pcie_link_up(&pcie->pp))
- return 0;
- usleep_range(250, 1000);
- } while (retries < 200);
-
- dev_warn(dev, "phy link never came up\n");
-
- return -ETIMEDOUT;
+ return dw_pcie_wait_for_link(&pcie->pp);
}
static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
rcar_pcie_setup(&res, pcie);
- /* Do not reassign resources if probe only */
- if (!pci_has_flag(PCI_PROBE_ONLY))
- pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
+ pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
if (IS_ENABLED(CONFIG_PCI_MSI))
bus = pci_scan_root_bus_msi(pcie->dev, pcie->root_bus_nr,
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
- if (!pci_has_flag(PCI_PROBE_ONLY)) {
- pci_bus_size_bridges(bus);
- pci_bus_assign_resources(bus);
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
- }
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
pci_bus_add_devices(bus);
*/
#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp);
struct pcie_app_reg *app_reg = spear13xx_pcie->app_base;
u32 exp_cap_off = EXP_CAP_ID_OFFSET;
- unsigned int retries;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "link already up\n");
| ((u32)1 << REG_TRANSLATION_ENABLE),
&app_reg->app_ctrl_0);
- /* check if the link is up or not */
- for (retries = 0; retries < 10; retries++) {
- if (dw_pcie_link_up(pp)) {
- dev_info(pp->dev, "link up\n");
- return 0;
- }
- mdelay(100);
- }
-
- dev_err(pp->dev, "link Fail\n");
- return -EINVAL;
+ return dw_pcie_wait_for_link(pp);
}
static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg)
--- /dev/null
+/*
+ * PCIe host controller driver for NWL PCIe Bridge
+ * Based on pcie-xilinx.c, pci-tegra.c
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip/chained_irq.h>
+
+/* Bridge core config registers */
+#define BRCFG_PCIE_RX0 0x00000000
+#define BRCFG_INTERRUPT 0x00000010
+#define BRCFG_PCIE_RX_MSG_FILTER 0x00000020
+
+/* Egress - Bridge translation registers */
+#define E_BREG_CAPABILITIES 0x00000200
+#define E_BREG_CONTROL 0x00000208
+#define E_BREG_BASE_LO 0x00000210
+#define E_BREG_BASE_HI 0x00000214
+#define E_ECAM_CAPABILITIES 0x00000220
+#define E_ECAM_CONTROL 0x00000228
+#define E_ECAM_BASE_LO 0x00000230
+#define E_ECAM_BASE_HI 0x00000234
+
+/* Ingress - address translations */
+#define I_MSII_CAPABILITIES 0x00000300
+#define I_MSII_CONTROL 0x00000308
+#define I_MSII_BASE_LO 0x00000310
+#define I_MSII_BASE_HI 0x00000314
+
+#define I_ISUB_CONTROL 0x000003E8
+#define SET_ISUB_CONTROL BIT(0)
+/* Rxed msg fifo - Interrupt status registers */
+#define MSGF_MISC_STATUS 0x00000400
+#define MSGF_MISC_MASK 0x00000404
+#define MSGF_LEG_STATUS 0x00000420
+#define MSGF_LEG_MASK 0x00000424
+#define MSGF_MSI_STATUS_LO 0x00000440
+#define MSGF_MSI_STATUS_HI 0x00000444
+#define MSGF_MSI_MASK_LO 0x00000448
+#define MSGF_MSI_MASK_HI 0x0000044C
+
+/* Msg filter mask bits */
+#define CFG_ENABLE_PM_MSG_FWD BIT(1)
+#define CFG_ENABLE_INT_MSG_FWD BIT(2)
+#define CFG_ENABLE_ERR_MSG_FWD BIT(3)
+#define CFG_ENABLE_SLT_MSG_FWD BIT(5)
+#define CFG_ENABLE_VEN_MSG_FWD BIT(7)
+#define CFG_ENABLE_OTH_MSG_FWD BIT(13)
+#define CFG_ENABLE_VEN_MSG_EN BIT(14)
+#define CFG_ENABLE_VEN_MSG_VEN_INV BIT(15)
+#define CFG_ENABLE_VEN_MSG_VEN_ID GENMASK(31, 16)
+#define CFG_ENABLE_MSG_FILTER_MASK (CFG_ENABLE_PM_MSG_FWD | \
+ CFG_ENABLE_INT_MSG_FWD | \
+ CFG_ENABLE_ERR_MSG_FWD | \
+ CFG_ENABLE_SLT_MSG_FWD | \
+ CFG_ENABLE_VEN_MSG_FWD | \
+ CFG_ENABLE_OTH_MSG_FWD | \
+ CFG_ENABLE_VEN_MSG_EN | \
+ CFG_ENABLE_VEN_MSG_VEN_INV | \
+ CFG_ENABLE_VEN_MSG_VEN_ID)
+
+/* Misc interrupt status mask bits */
+#define MSGF_MISC_SR_RXMSG_AVAIL BIT(0)
+#define MSGF_MISC_SR_RXMSG_OVER BIT(1)
+#define MSGF_MISC_SR_SLAVE_ERR BIT(4)
+#define MSGF_MISC_SR_MASTER_ERR BIT(5)
+#define MSGF_MISC_SR_I_ADDR_ERR BIT(6)
+#define MSGF_MISC_SR_E_ADDR_ERR BIT(7)
+#define MSGF_MISC_SR_UR_DETECT BIT(20)
+
+#define MSGF_MISC_SR_PCIE_CORE GENMASK(18, 16)
+#define MSGF_MISC_SR_PCIE_CORE_ERR GENMASK(31, 22)
+
+#define MSGF_MISC_SR_MASKALL (MSGF_MISC_SR_RXMSG_AVAIL | \
+ MSGF_MISC_SR_RXMSG_OVER | \
+ MSGF_MISC_SR_SLAVE_ERR | \
+ MSGF_MISC_SR_MASTER_ERR | \
+ MSGF_MISC_SR_I_ADDR_ERR | \
+ MSGF_MISC_SR_E_ADDR_ERR | \
+ MSGF_MISC_SR_UR_DETECT | \
+ MSGF_MISC_SR_PCIE_CORE | \
+ MSGF_MISC_SR_PCIE_CORE_ERR)
+
+/* Legacy interrupt status mask bits */
+#define MSGF_LEG_SR_INTA BIT(0)
+#define MSGF_LEG_SR_INTB BIT(1)
+#define MSGF_LEG_SR_INTC BIT(2)
+#define MSGF_LEG_SR_INTD BIT(3)
+#define MSGF_LEG_SR_MASKALL (MSGF_LEG_SR_INTA | MSGF_LEG_SR_INTB | \
+ MSGF_LEG_SR_INTC | MSGF_LEG_SR_INTD)
+
+/* MSI interrupt status mask bits */
+#define MSGF_MSI_SR_LO_MASK BIT(0)
+#define MSGF_MSI_SR_HI_MASK BIT(0)
+
+#define MSII_PRESENT BIT(0)
+#define MSII_ENABLE BIT(0)
+#define MSII_STATUS_ENABLE BIT(15)
+
+/* Bridge config interrupt mask */
+#define BRCFG_INTERRUPT_MASK BIT(0)
+#define BREG_PRESENT BIT(0)
+#define BREG_ENABLE BIT(0)
+#define BREG_ENABLE_FORCE BIT(1)
+
+/* E_ECAM status mask bits */
+#define E_ECAM_PRESENT BIT(0)
+#define E_ECAM_CR_ENABLE BIT(0)
+#define E_ECAM_SIZE_LOC GENMASK(20, 16)
+#define E_ECAM_SIZE_SHIFT 16
+#define ECAM_BUS_LOC_SHIFT 20
+#define ECAM_DEV_LOC_SHIFT 12
+#define NWL_ECAM_VALUE_DEFAULT 12
+
+#define CFG_DMA_REG_BAR GENMASK(2, 0)
+
+#define INT_PCI_MSI_NR (2 * 32)
+#define INTX_NUM 4
+
+/* Readin the PS_LINKUP */
+#define PS_LINKUP_OFFSET 0x00000238
+#define PCIE_PHY_LINKUP_BIT BIT(0)
+#define PHY_RDY_LINKUP_BIT BIT(1)
+
+/* Parameters for the waiting for link up routine */
+#define LINK_WAIT_MAX_RETRIES 10
+#define LINK_WAIT_USLEEP_MIN 90000
+#define LINK_WAIT_USLEEP_MAX 100000
+
+struct nwl_msi { /* MSI information */
+ struct irq_domain *msi_domain;
+ unsigned long *bitmap;
+ struct irq_domain *dev_domain;
+ struct mutex lock; /* protect bitmap variable */
+ int irq_msi0;
+ int irq_msi1;
+};
+
+struct nwl_pcie {
+ struct device *dev;
+ void __iomem *breg_base;
+ void __iomem *pcireg_base;
+ void __iomem *ecam_base;
+ phys_addr_t phys_breg_base; /* Physical Bridge Register Base */
+ phys_addr_t phys_pcie_reg_base; /* Physical PCIe Controller Base */
+ phys_addr_t phys_ecam_base; /* Physical Configuration Base */
+ u32 breg_size;
+ u32 pcie_reg_size;
+ u32 ecam_size;
+ int irq_intx;
+ int irq_misc;
+ u32 ecam_value;
+ u8 last_busno;
+ u8 root_busno;
+ struct nwl_msi msi;
+ struct irq_domain *legacy_irq_domain;
+};
+
+static inline u32 nwl_bridge_readl(struct nwl_pcie *pcie, u32 off)
+{
+ return readl(pcie->breg_base + off);
+}
+
+static inline void nwl_bridge_writel(struct nwl_pcie *pcie, u32 val, u32 off)
+{
+ writel(val, pcie->breg_base + off);
+}
+
+static bool nwl_pcie_link_up(struct nwl_pcie *pcie)
+{
+ if (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) & PCIE_PHY_LINKUP_BIT)
+ return true;
+ return false;
+}
+
+static bool nwl_phy_link_up(struct nwl_pcie *pcie)
+{
+ if (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) & PHY_RDY_LINKUP_BIT)
+ return true;
+ return false;
+}
+
+static int nwl_wait_for_link(struct nwl_pcie *pcie)
+{
+ int retries;
+
+ /* check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (nwl_phy_link_up(pcie))
+ return 0;
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ dev_err(pcie->dev, "PHY link never came up\n");
+ return -ETIMEDOUT;
+}
+
+static bool nwl_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
+{
+ struct nwl_pcie *pcie = bus->sysdata;
+
+ /* Check link before accessing downstream ports */
+ if (bus->number != pcie->root_busno) {
+ if (!nwl_pcie_link_up(pcie))
+ return false;
+ }
+
+ /* Only one device down on each root port */
+ if (bus->number == pcie->root_busno && devfn > 0)
+ return false;
+
+ return true;
+}
+
+/**
+ * nwl_pcie_map_bus - Get configuration base
+ *
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ * accessed.
+ */
+static void __iomem *nwl_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+ int where)
+{
+ struct nwl_pcie *pcie = bus->sysdata;
+ int relbus;
+
+ if (!nwl_pcie_valid_device(bus, devfn))
+ return NULL;
+
+ relbus = (bus->number << ECAM_BUS_LOC_SHIFT) |
+ (devfn << ECAM_DEV_LOC_SHIFT);
+
+ return pcie->ecam_base + relbus + where;
+}
+
+/* PCIe operations */
+static struct pci_ops nwl_pcie_ops = {
+ .map_bus = nwl_pcie_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+static irqreturn_t nwl_pcie_misc_handler(int irq, void *data)
+{
+ struct nwl_pcie *pcie = data;
+ u32 misc_stat;
+
+ /* Checking for misc interrupts */
+ misc_stat = nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
+ MSGF_MISC_SR_MASKALL;
+ if (!misc_stat)
+ return IRQ_NONE;
+
+ if (misc_stat & MSGF_MISC_SR_RXMSG_OVER)
+ dev_err(pcie->dev, "Received Message FIFO Overflow\n");
+
+ if (misc_stat & MSGF_MISC_SR_SLAVE_ERR)
+ dev_err(pcie->dev, "Slave error\n");
+
+ if (misc_stat & MSGF_MISC_SR_MASTER_ERR)
+ dev_err(pcie->dev, "Master error\n");
+
+ if (misc_stat & MSGF_MISC_SR_I_ADDR_ERR)
+ dev_err(pcie->dev,
+ "In Misc Ingress address translation error\n");
+
+ if (misc_stat & MSGF_MISC_SR_E_ADDR_ERR)
+ dev_err(pcie->dev,
+ "In Misc Egress address translation error\n");
+
+ if (misc_stat & MSGF_MISC_SR_PCIE_CORE_ERR)
+ dev_err(pcie->dev, "PCIe Core error\n");
+
+ /* Clear misc interrupt status */
+ nwl_bridge_writel(pcie, misc_stat, MSGF_MISC_STATUS);
+
+ return IRQ_HANDLED;
+}
+
+static void nwl_pcie_leg_handler(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct nwl_pcie *pcie;
+ unsigned long status;
+ u32 bit;
+ u32 virq;
+
+ chained_irq_enter(chip, desc);
+ pcie = irq_desc_get_handler_data(desc);
+
+ while ((status = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
+ MSGF_LEG_SR_MASKALL) != 0) {
+ for_each_set_bit(bit, &status, INTX_NUM) {
+ virq = irq_find_mapping(pcie->legacy_irq_domain,
+ bit + 1);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void nwl_pcie_handle_msi_irq(struct nwl_pcie *pcie, u32 status_reg)
+{
+ struct nwl_msi *msi;
+ unsigned long status;
+ u32 bit;
+ u32 virq;
+
+ msi = &pcie->msi;
+
+ while ((status = nwl_bridge_readl(pcie, status_reg)) != 0) {
+ for_each_set_bit(bit, &status, 32) {
+ nwl_bridge_writel(pcie, 1 << bit, status_reg);
+ virq = irq_find_mapping(msi->dev_domain, bit);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+ }
+}
+
+static void nwl_pcie_msi_handler_high(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct nwl_pcie *pcie = irq_desc_get_handler_data(desc);
+
+ chained_irq_enter(chip, desc);
+ nwl_pcie_handle_msi_irq(pcie, MSGF_MSI_STATUS_HI);
+ chained_irq_exit(chip, desc);
+}
+
+static void nwl_pcie_msi_handler_low(struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct nwl_pcie *pcie = irq_desc_get_handler_data(desc);
+
+ chained_irq_enter(chip, desc);
+ nwl_pcie_handle_msi_irq(pcie, MSGF_MSI_STATUS_LO);
+ chained_irq_exit(chip, desc);
+}
+
+static int nwl_legacy_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops legacy_domain_ops = {
+ .map = nwl_legacy_map,
+};
+
+#ifdef CONFIG_PCI_MSI
+static struct irq_chip nwl_msi_irq_chip = {
+ .name = "nwl_pcie:msi",
+ .irq_enable = unmask_msi_irq,
+ .irq_disable = mask_msi_irq,
+ .irq_mask = mask_msi_irq,
+ .irq_unmask = unmask_msi_irq,
+
+};
+
+static struct msi_domain_info nwl_msi_domain_info = {
+ .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+ MSI_FLAG_MULTI_PCI_MSI),
+ .chip = &nwl_msi_irq_chip,
+};
+#endif
+
+static void nwl_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+ struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
+ phys_addr_t msi_addr = pcie->phys_pcie_reg_base;
+
+ msg->address_lo = lower_32_bits(msi_addr);
+ msg->address_hi = upper_32_bits(msi_addr);
+ msg->data = data->hwirq;
+}
+
+static int nwl_msi_set_affinity(struct irq_data *irq_data,
+ const struct cpumask *mask, bool force)
+{
+ return -EINVAL;
+}
+
+static struct irq_chip nwl_irq_chip = {
+ .name = "Xilinx MSI",
+ .irq_compose_msi_msg = nwl_compose_msi_msg,
+ .irq_set_affinity = nwl_msi_set_affinity,
+};
+
+static int nwl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *args)
+{
+ struct nwl_pcie *pcie = domain->host_data;
+ struct nwl_msi *msi = &pcie->msi;
+ int bit;
+ int i;
+
+ mutex_lock(&msi->lock);
+ bit = bitmap_find_next_zero_area(msi->bitmap, INT_PCI_MSI_NR, 0,
+ nr_irqs, 0);
+ if (bit >= INT_PCI_MSI_NR) {
+ mutex_unlock(&msi->lock);
+ return -ENOSPC;
+ }
+
+ bitmap_set(msi->bitmap, bit, nr_irqs);
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_info(domain, virq + i, bit + i, &nwl_irq_chip,
+ domain->host_data, handle_simple_irq,
+ NULL, NULL);
+ }
+ mutex_unlock(&msi->lock);
+ return 0;
+}
+
+static void nwl_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs)
+{
+ struct irq_data *data = irq_domain_get_irq_data(domain, virq);
+ struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
+ struct nwl_msi *msi = &pcie->msi;
+
+ mutex_lock(&msi->lock);
+ bitmap_clear(msi->bitmap, data->hwirq, nr_irqs);
+ mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops dev_msi_domain_ops = {
+ .alloc = nwl_irq_domain_alloc,
+ .free = nwl_irq_domain_free,
+};
+
+static void nwl_msi_free_irq_domain(struct nwl_pcie *pcie)
+{
+ struct nwl_msi *msi = &pcie->msi;
+
+ if (msi->irq_msi0)
+ irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
+ if (msi->irq_msi1)
+ irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);
+
+ if (msi->msi_domain)
+ irq_domain_remove(msi->msi_domain);
+ if (msi->dev_domain)
+ irq_domain_remove(msi->dev_domain);
+
+ kfree(msi->bitmap);
+ msi->bitmap = NULL;
+}
+
+static void nwl_pcie_free_irq_domain(struct nwl_pcie *pcie)
+{
+ int i;
+ u32 irq;
+
+ for (i = 0; i < INTX_NUM; i++) {
+ irq = irq_find_mapping(pcie->legacy_irq_domain, i + 1);
+ if (irq > 0)
+ irq_dispose_mapping(irq);
+ }
+ if (pcie->legacy_irq_domain)
+ irq_domain_remove(pcie->legacy_irq_domain);
+
+ nwl_msi_free_irq_domain(pcie);
+}
+
+static int nwl_pcie_init_msi_irq_domain(struct nwl_pcie *pcie)
+{
+#ifdef CONFIG_PCI_MSI
+ struct fwnode_handle *fwnode = of_node_to_fwnode(pcie->dev->of_node);
+ struct nwl_msi *msi = &pcie->msi;
+
+ msi->dev_domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
+ &dev_msi_domain_ops, pcie);
+ if (!msi->dev_domain) {
+ dev_err(pcie->dev, "failed to create dev IRQ domain\n");
+ return -ENOMEM;
+ }
+ msi->msi_domain = pci_msi_create_irq_domain(fwnode,
+ &nwl_msi_domain_info,
+ msi->dev_domain);
+ if (!msi->msi_domain) {
+ dev_err(pcie->dev, "failed to create msi IRQ domain\n");
+ irq_domain_remove(msi->dev_domain);
+ return -ENOMEM;
+ }
+#endif
+ return 0;
+}
+
+static int nwl_pcie_init_irq_domain(struct nwl_pcie *pcie)
+{
+ struct device_node *node = pcie->dev->of_node;
+ struct device_node *legacy_intc_node;
+
+ legacy_intc_node = of_get_next_child(node, NULL);
+ if (!legacy_intc_node) {
+ dev_err(pcie->dev, "No legacy intc node found\n");
+ return -EINVAL;
+ }
+
+ pcie->legacy_irq_domain = irq_domain_add_linear(legacy_intc_node,
+ INTX_NUM,
+ &legacy_domain_ops,
+ pcie);
+
+ if (!pcie->legacy_irq_domain) {
+ dev_err(pcie->dev, "failed to create IRQ domain\n");
+ return -ENOMEM;
+ }
+
+ nwl_pcie_init_msi_irq_domain(pcie);
+ return 0;
+}
+
+static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
+{
+ struct platform_device *pdev = to_platform_device(pcie->dev);
+ struct nwl_msi *msi = &pcie->msi;
+ unsigned long base;
+ int ret;
+ int size = BITS_TO_LONGS(INT_PCI_MSI_NR) * sizeof(long);
+
+ mutex_init(&msi->lock);
+
+ msi->bitmap = kzalloc(size, GFP_KERNEL);
+ if (!msi->bitmap)
+ return -ENOMEM;
+
+ /* Get msi_1 IRQ number */
+ msi->irq_msi1 = platform_get_irq_byname(pdev, "msi1");
+ if (msi->irq_msi1 < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ irq_set_chained_handler_and_data(msi->irq_msi1,
+ nwl_pcie_msi_handler_high, pcie);
+
+ /* Get msi_0 IRQ number */
+ msi->irq_msi0 = platform_get_irq_byname(pdev, "msi0");
+ if (msi->irq_msi0 < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ irq_set_chained_handler_and_data(msi->irq_msi0,
+ nwl_pcie_msi_handler_low, pcie);
+
+ /* Check for msii_present bit */
+ ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
+ if (!ret) {
+ dev_err(pcie->dev, "MSI not present\n");
+ ret = -EIO;
+ goto err;
+ }
+
+ /* Enable MSII */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
+ MSII_ENABLE, I_MSII_CONTROL);
+
+ /* Enable MSII status */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
+ MSII_STATUS_ENABLE, I_MSII_CONTROL);
+
+ /* setup AFI/FPCI range */
+ base = pcie->phys_pcie_reg_base;
+ nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
+ nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
+
+ /*
+ * For high range MSI interrupts: disable, clear any pending,
+ * and enable
+ */
+ nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
+
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI) &
+ MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
+
+ nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
+
+ /*
+ * For low range MSI interrupts: disable, clear any pending,
+ * and enable
+ */
+ nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
+
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
+ MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
+
+ nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
+
+ return 0;
+err:
+ kfree(msi->bitmap);
+ msi->bitmap = NULL;
+ return ret;
+}
+
+static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
+{
+ struct platform_device *pdev = to_platform_device(pcie->dev);
+ u32 breg_val, ecam_val, first_busno = 0;
+ int err;
+
+ breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
+ if (!breg_val) {
+ dev_err(pcie->dev, "BREG is not present\n");
+ return breg_val;
+ }
+
+ /* Write bridge_off to breg base */
+ nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_breg_base),
+ E_BREG_BASE_LO);
+ nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_breg_base),
+ E_BREG_BASE_HI);
+
+ /* Enable BREG */
+ nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
+ E_BREG_CONTROL);
+
+ /* Disable DMA channel registers */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
+ CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
+
+ /* Enable Ingress subtractive decode translation */
+ nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
+
+ /* Enable msg filtering details */
+ nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
+ BRCFG_PCIE_RX_MSG_FILTER);
+
+ err = nwl_wait_for_link(pcie);
+ if (err)
+ return err;
+
+ ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
+ if (!ecam_val) {
+ dev_err(pcie->dev, "ECAM is not present\n");
+ return ecam_val;
+ }
+
+ /* Enable ECAM */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
+ E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
+
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
+ (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
+ E_ECAM_CONTROL);
+
+ nwl_bridge_writel(pcie, lower_32_bits(pcie->phys_ecam_base),
+ E_ECAM_BASE_LO);
+ nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_ecam_base),
+ E_ECAM_BASE_HI);
+
+ /* Get bus range */
+ ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
+ pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
+ /* Write primary, secondary and subordinate bus numbers */
+ ecam_val = first_busno;
+ ecam_val |= (first_busno + 1) << 8;
+ ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
+ writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
+
+ if (nwl_pcie_link_up(pcie))
+ dev_info(pcie->dev, "Link is UP\n");
+ else
+ dev_info(pcie->dev, "Link is DOWN\n");
+
+ /* Get misc IRQ number */
+ pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
+ if (pcie->irq_misc < 0) {
+ dev_err(&pdev->dev, "failed to get misc IRQ %d\n",
+ pcie->irq_misc);
+ return -EINVAL;
+ }
+
+ err = devm_request_irq(pcie->dev, pcie->irq_misc,
+ nwl_pcie_misc_handler, IRQF_SHARED,
+ "nwl_pcie:misc", pcie);
+ if (err) {
+ dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
+ pcie->irq_misc);
+ return err;
+ }
+
+ /* Disable all misc interrupts */
+ nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
+
+ /* Clear pending misc interrupts */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
+ MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
+
+ /* Enable all misc interrupts */
+ nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
+
+
+ /* Disable all legacy interrupts */
+ nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
+
+ /* Clear pending legacy interrupts */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
+ MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
+
+ /* Enable all legacy interrupts */
+ nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
+
+ /* Enable the bridge config interrupt */
+ nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
+ BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
+
+ return 0;
+}
+
+static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
+ struct platform_device *pdev)
+{
+ struct device_node *node = pcie->dev->of_node;
+ struct resource *res;
+ const char *type;
+
+ /* Check for device type */
+ type = of_get_property(node, "device_type", NULL);
+ if (!type || strcmp(type, "pci")) {
+ dev_err(pcie->dev, "invalid \"device_type\" %s\n", type);
+ return -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
+ pcie->breg_base = devm_ioremap_resource(pcie->dev, res);
+ if (IS_ERR(pcie->breg_base))
+ return PTR_ERR(pcie->breg_base);
+ pcie->phys_breg_base = res->start;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcireg");
+ pcie->pcireg_base = devm_ioremap_resource(pcie->dev, res);
+ if (IS_ERR(pcie->pcireg_base))
+ return PTR_ERR(pcie->pcireg_base);
+ pcie->phys_pcie_reg_base = res->start;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+ pcie->ecam_base = devm_ioremap_resource(pcie->dev, res);
+ if (IS_ERR(pcie->ecam_base))
+ return PTR_ERR(pcie->ecam_base);
+ pcie->phys_ecam_base = res->start;
+
+ /* Get intx IRQ number */
+ pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
+ if (pcie->irq_intx < 0) {
+ dev_err(&pdev->dev, "failed to get intx IRQ %d\n",
+ pcie->irq_intx);
+ return -EINVAL;
+ }
+
+ irq_set_chained_handler_and_data(pcie->irq_intx,
+ nwl_pcie_leg_handler, pcie);
+
+ return 0;
+}
+
+static const struct of_device_id nwl_pcie_of_match[] = {
+ { .compatible = "xlnx,nwl-pcie-2.11", },
+ {}
+};
+
+static int nwl_pcie_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct nwl_pcie *pcie;
+ struct pci_bus *bus;
+ struct pci_bus *child;
+ int err;
+ resource_size_t iobase = 0;
+ LIST_HEAD(res);
+
+ pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->dev = &pdev->dev;
+ pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
+
+ err = nwl_pcie_parse_dt(pcie, pdev);
+ if (err) {
+ dev_err(pcie->dev, "Parsing DT failed\n");
+ return err;
+ }
+
+ err = nwl_pcie_bridge_init(pcie);
+ if (err) {
+ dev_err(pcie->dev, "HW Initalization failed\n");
+ return err;
+ }
+
+ err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
+ if (err) {
+ pr_err("Getting bridge resources failed\n");
+ return err;
+ }
+
+ err = nwl_pcie_init_irq_domain(pcie);
+ if (err) {
+ dev_err(pcie->dev, "Failed creating IRQ Domain\n");
+ return err;
+ }
+
+ bus = pci_create_root_bus(&pdev->dev, pcie->root_busno,
+ &nwl_pcie_ops, pcie, &res);
+ if (!bus)
+ return -ENOMEM;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ err = nwl_pcie_enable_msi(pcie, bus);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "failed to enable MSI support: %d\n", err);
+ return err;
+ }
+ }
+ pci_scan_child_bus(bus);
+ pci_assign_unassigned_bus_resources(bus);
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ pci_bus_add_devices(bus);
+ platform_set_drvdata(pdev, pcie);
+ return 0;
+}
+
+static int nwl_pcie_remove(struct platform_device *pdev)
+{
+ struct nwl_pcie *pcie = platform_get_drvdata(pdev);
+
+ nwl_pcie_free_irq_domain(pcie);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver nwl_pcie_driver = {
+ .driver = {
+ .name = "nwl-pcie",
+ .of_match_table = nwl_pcie_of_match,
+ },
+ .probe = nwl_pcie_probe,
+ .remove = nwl_pcie_remove,
+};
+module_platform_driver(nwl_pcie_driver);
+
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_DESCRIPTION("NWL PCIe driver");
+MODULE_LICENSE("GPL");
/* Number of MSI IRQs */
#define XILINX_NUM_MSI_IRQS 128
-/* Number of Memory Resources */
-#define XILINX_MAX_NUM_RESOURCES 3
-
/**
* struct xilinx_pcie_port - PCIe port information
* @reg_base: IO Mapped Register Base
* @root_busno: Root Bus number
* @dev: Device pointer
* @irq_domain: IRQ domain pointer
- * @bus_range: Bus range
* @resources: Bus Resources
*/
struct xilinx_pcie_port {
u8 root_busno;
struct device *dev;
struct irq_domain *irq_domain;
- struct resource bus_range;
struct list_head resources;
};
static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
-static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
- return sys->private_data;
-}
-
static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
{
return readl(port->reg_base + reg);
*/
static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
{
- struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+ struct xilinx_pcie_port *port = bus->sysdata;
/* Check if link is up when trying to access downstream ports */
if (bus->number != port->root_busno)
static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
unsigned int devfn, int where)
{
- struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+ struct xilinx_pcie_port *port = bus->sysdata;
int relbus;
if (!xilinx_pcie_valid_device(bus, devfn))
if (!test_bit(irq, msi_irq_in_use)) {
msi = irq_get_msi_desc(irq);
- port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+ port = msi_desc_to_pci_sysdata(msi);
dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
} else {
clear_bit(irq, msi_irq_in_use);
struct pci_dev *pdev,
struct msi_desc *desc)
{
- struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+ struct xilinx_pcie_port *port = pdev->bus->sysdata;
unsigned int irq;
int hwirq;
struct msi_msg msg;
XILINX_PCIE_REG_RPSC);
}
-/**
- * xilinx_pcie_setup - Setup memory resources
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: '1' on success and error value on failure
- */
-static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
-{
- struct xilinx_pcie_port *port = sys_to_pcie(sys);
-
- list_splice_init(&port->resources, &sys->resources);
-
- return 1;
-}
-
-/**
- * xilinx_pcie_scan_bus - Scan PCIe bus for devices
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: Valid Bus pointer on success and NULL on failure
- */
-static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
- struct xilinx_pcie_port *port = sys_to_pcie(sys);
- struct pci_bus *bus;
-
- port->root_busno = sys->busnr;
-
- if (IS_ENABLED(CONFIG_PCI_MSI))
- bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
- &xilinx_pcie_ops, sys,
- &sys->resources,
- &xilinx_pcie_msi_chip);
- else
- bus = pci_scan_root_bus(port->dev, sys->busnr,
- &xilinx_pcie_ops, sys, &sys->resources);
- return bus;
-}
-
-/**
- * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
- * @port: PCIe port information
- *
- * Return: '0' on success and error value on failure
- */
-static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
-{
- struct device *dev = port->dev;
- struct device_node *node = dev->of_node;
- struct resource *mem;
- resource_size_t offset;
- struct of_pci_range_parser parser;
- struct of_pci_range range;
- struct resource_entry *win;
- int err = 0, mem_resno = 0;
-
- /* Get the ranges */
- if (of_pci_range_parser_init(&parser, node)) {
- dev_err(dev, "missing \"ranges\" property\n");
- return -EINVAL;
- }
-
- /* Parse the ranges and add the resources found to the list */
- for_each_of_pci_range(&parser, &range) {
-
- if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
- dev_err(dev, "Maximum memory resources exceeded\n");
- return -EINVAL;
- }
-
- mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
- if (!mem) {
- err = -ENOMEM;
- goto free_resources;
- }
-
- of_pci_range_to_resource(&range, node, mem);
-
- switch (mem->flags & IORESOURCE_TYPE_BITS) {
- case IORESOURCE_MEM:
- offset = range.cpu_addr - range.pci_addr;
- mem_resno++;
- break;
- default:
- err = -EINVAL;
- break;
- }
-
- if (err < 0) {
- dev_warn(dev, "Invalid resource found %pR\n", mem);
- continue;
- }
-
- err = request_resource(&iomem_resource, mem);
- if (err)
- goto free_resources;
-
- pci_add_resource_offset(&port->resources, mem, offset);
- }
-
- /* Get the bus range */
- if (of_pci_parse_bus_range(node, &port->bus_range)) {
- u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
- u8 last;
-
- last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
- XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
-
- port->bus_range = (struct resource) {
- .name = node->name,
- .start = 0,
- .end = last,
- .flags = IORESOURCE_BUS,
- };
- }
-
- /* Register bus resource */
- pci_add_resource(&port->resources, &port->bus_range);
-
- return 0;
-
-free_resources:
- release_child_resources(&iomem_resource);
- resource_list_for_each_entry(win, &port->resources)
- devm_kfree(dev, win->res);
- pci_free_resource_list(&port->resources);
-
- return err;
-}
-
/**
* xilinx_pcie_parse_dt - Parse Device tree
* @port: PCIe port information
static int xilinx_pcie_probe(struct platform_device *pdev)
{
struct xilinx_pcie_port *port;
- struct hw_pci hw;
struct device *dev = &pdev->dev;
+ struct pci_bus *bus;
+
int err;
+ resource_size_t iobase = 0;
+ LIST_HEAD(res);
if (!dev->of_node)
return -ENODEV;
return err;
}
- /*
- * Parse PCI ranges, configuration bus range and
- * request their resources
- */
- INIT_LIST_HEAD(&port->resources);
- err = xilinx_pcie_parse_and_add_res(port);
+ err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, &res,
+ &iobase);
if (err) {
- dev_err(dev, "Failed adding resources\n");
+ dev_err(dev, "Getting bridge resources failed\n");
return err;
}
-
- platform_set_drvdata(pdev, port);
-
- /* Register the device */
- memset(&hw, 0, sizeof(hw));
- hw = (struct hw_pci) {
- .nr_controllers = 1,
- .private_data = (void **)&port,
- .setup = xilinx_pcie_setup,
- .map_irq = of_irq_parse_and_map_pci,
- .scan = xilinx_pcie_scan_bus,
- .ops = &xilinx_pcie_ops,
- };
+ bus = pci_create_root_bus(&pdev->dev, 0,
+ &xilinx_pcie_ops, port, &res);
+ if (!bus)
+ return -ENOMEM;
#ifdef CONFIG_PCI_MSI
xilinx_pcie_msi_chip.dev = port->dev;
+ bus->msi = &xilinx_pcie_msi_chip;
#endif
- pci_common_init_dev(dev, &hw);
+ pci_scan_child_bus(bus);
+ pci_assign_unassigned_bus_resources(bus);
+#ifndef CONFIG_MICROBLAZE
+ pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
+ pci_bus_add_devices(bus);
+ platform_set_drvdata(pdev, port);
return 0;
}
struct resource *res;
struct pci_dev *pdev;
- if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END &&
- pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT)
- return -ENODEV;
-
pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
if (ctrl & PCI_SRIOV_CTRL_VFE) {
pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);
* the instance number and string from the type 41 record and exports
* it to sysfs.
*
- * Please see http://linux.dell.com/wiki/index.php/Oss/libnetdevname for more
+ * Please see http://linux.dell.com/files/biosdevname/ for more
* information.
*/
{
struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
- if (off > bin_attr->size)
- count = 0;
- else if (count > bin_attr->size - off)
- count = bin_attr->size - off;
+ if (bin_attr->size > 0) {
+ if (off > bin_attr->size)
+ count = 0;
+ else if (count > bin_attr->size - off)
+ count = bin_attr->size - off;
+ }
return pci_read_vpd(dev, off, count, buf);
}
{
struct pci_dev *dev = to_pci_dev(kobj_to_dev(kobj));
- if (off > bin_attr->size)
- count = 0;
- else if (count > bin_attr->size - off)
- count = bin_attr->size - off;
+ if (bin_attr->size > 0) {
+ if (off > bin_attr->size)
+ count = 0;
+ else if (count > bin_attr->size - off)
+ count = bin_attr->size - off;
+ }
return pci_write_vpd(dev, off, count, buf);
}
/* allocate attribute structure, piggyback attribute name */
int name_len = write_combine ? 13 : 10;
struct bin_attribute *res_attr;
+ char *res_attr_name;
int retval;
res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
-
- sysfs_bin_attr_init(res_attr);
- if (write_combine) {
- pdev->res_attr_wc[num] = res_attr;
- sprintf(res_attr_name, "resource%d_wc", num);
- res_attr->mmap = pci_mmap_resource_wc;
- } else {
- pdev->res_attr[num] = res_attr;
- sprintf(res_attr_name, "resource%d", num);
- res_attr->mmap = pci_mmap_resource_uc;
- }
- if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
- res_attr->read = pci_read_resource_io;
- res_attr->write = pci_write_resource_io;
- }
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, num);
- res_attr->private = &pdev->resource[num];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- } else
- retval = -ENOMEM;
+ if (!res_attr)
+ return -ENOMEM;
+
+ res_attr_name = (char *)(res_attr + 1);
+
+ sysfs_bin_attr_init(res_attr);
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ if (pci_resource_flags(pdev, num) & IORESOURCE_IO) {
+ res_attr->read = pci_read_resource_io;
+ res_attr->write = pci_write_resource_io;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ if (retval)
+ kfree(res_attr);
return retval;
}
return -ENOMEM;
sysfs_bin_attr_init(attr);
- attr->size = dev->vpd->len;
+ attr->size = 0;
attr->attr.name = "vpd";
attr->attr.mode = S_IRUSR | S_IWUSR;
attr->read = read_vpd_attr;
int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
{
int retval;
- int rom_size = 0;
+ int rom_size;
struct bin_attribute *attr;
if (!sysfs_initialized)
if (retval)
goto err_config_file;
- if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
- rom_size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
- else if (pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW)
- rom_size = 0x20000;
-
/* If the device has a ROM, try to expose it in sysfs. */
+ rom_size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
if (rom_size) {
attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
if (!attr) {
return 0;
err_rom_file:
- if (rom_size) {
+ if (pdev->rom_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
kfree(pdev->rom_attr);
pdev->rom_attr = NULL;
*/
void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
{
- int rom_size = 0;
-
if (!sysfs_initialized)
return;
pci_remove_resource_files(pdev);
- if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
- rom_size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
- else if (pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW)
- rom_size = 0x20000;
-
- if (rom_size && pdev->rom_attr) {
+ if (pdev->rom_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
kfree(pdev->rom_attr);
+ pdev->rom_attr = NULL;
}
pci_remove_firmware_label_files(pdev);
-
}
static int __init pci_sysfs_init(void)
#include <linux/device.h>
#include <linux/pm_runtime.h>
#include <linux/pci_hotplug.h>
-#include <asm-generic/pci-bridge.h>
#include <asm/setup.h>
#include <linux/aer.h>
#include "pci.h"
}
EXPORT_SYMBOL_GPL(pci_check_and_unmask_intx);
-int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size)
-{
- return dma_set_max_seg_size(&dev->dev, size);
-}
-EXPORT_SYMBOL(pci_set_dma_max_seg_size);
-
-int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask)
-{
- return dma_set_seg_boundary(&dev->dev, mask);
-}
-EXPORT_SYMBOL(pci_set_dma_seg_boundary);
-
/**
* pci_wait_for_pending_transaction - waits for pending transaction
* @dev: the PCI device to operate on
}
EXPORT_SYMBOL(pci_wait_for_pending_transaction);
+/*
+ * We should only need to wait 100ms after FLR, but some devices take longer.
+ * Wait for up to 1000ms for config space to return something other than -1.
+ * Intel IGD requires this when an LCD panel is attached. We read the 2nd
+ * dword because VFs don't implement the 1st dword.
+ */
+static void pci_flr_wait(struct pci_dev *dev)
+{
+ int i = 0;
+ u32 id;
+
+ do {
+ msleep(100);
+ pci_read_config_dword(dev, PCI_COMMAND, &id);
+ } while (i++ < 10 && id == ~0);
+
+ if (id == ~0)
+ dev_warn(&dev->dev, "Failed to return from FLR\n");
+ else if (i > 1)
+ dev_info(&dev->dev, "Required additional %dms to return from FLR\n",
+ (i - 1) * 100);
+}
+
static int pcie_flr(struct pci_dev *dev, int probe)
{
u32 cap;
dev_err(&dev->dev, "timed out waiting for pending transaction; performing function level reset anyway\n");
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
- msleep(100);
+ pci_flr_wait(dev);
return 0;
}
dev_err(&dev->dev, "timed out waiting for pending transaction; performing AF function level reset anyway\n");
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
- msleep(100);
+ pci_flr_wait(dev);
return 0;
}
struct pci_vpd_ops {
ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
- void (*release)(struct pci_dev *dev);
};
struct pci_vpd {
- unsigned int len;
const struct pci_vpd_ops *ops;
struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
+ struct mutex lock;
+ unsigned int len;
+ u16 flag;
+ u8 cap;
+ u8 busy:1;
+ u8 valid:1;
};
-int pci_vpd_pci22_init(struct pci_dev *dev);
-static inline void pci_vpd_release(struct pci_dev *dev)
-{
- if (dev->vpd)
- dev->vpd->ops->release(dev);
-}
+int pci_vpd_init(struct pci_dev *dev);
+void pci_vpd_release(struct pci_dev *dev);
/* PCI /proc functions */
#ifdef CONFIG_PROC_FS
/sys/module/pcie_aspm/parameters/policy
When in doubt, say Y.
+
config PCIEASPM_DEBUG
bool "Debug PCI Express ASPM"
depends on PCIEASPM
depends on PCIEASPM
config PCIEASPM_DEFAULT
- bool "BIOS default"
+ bool "BIOS default"
depends on PCIEASPM
help
Use the BIOS defaults for PCI Express ASPM.
config PCIEASPM_POWERSAVE
- bool "Powersave"
+ bool "Powersave"
depends on PCIEASPM
help
Enable PCI Express ASPM L0s and L1 where possible, even if the
BIOS did not.
config PCIEASPM_PERFORMANCE
- bool "Performance"
+ bool "Performance"
depends on PCIEASPM
help
Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them.
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/stddef.h>
+#include <linux/device.h>
#include "aerdrv.h"
/* Override the existing corrected and uncorrected error masks */
static struct pci_bus_ops *pci_bus_ops_pop(void)
{
unsigned long flags;
- struct pci_bus_ops *bus_ops = NULL;
+ struct pci_bus_ops *bus_ops;
spin_lock_irqsave(&inject_lock, flags);
- if (list_empty(&pci_bus_ops_list))
- bus_ops = NULL;
- else {
- struct list_head *lh = pci_bus_ops_list.next;
- list_del(lh);
- bus_ops = list_entry(lh, struct pci_bus_ops, list);
- }
+ bus_ops = list_first_entry_or_null(&pci_bus_ops_list,
+ struct pci_bus_ops, list);
+ if (bus_ops)
+ list_del(&bus_ops->list);
spin_unlock_irqrestore(&inject_lock, flags);
return bus_ops;
}
return target;
}
-static int pci_read_aer(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
+static int aer_inj_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
{
u32 *sim;
struct aer_error *err;
unsigned long flags;
struct pci_ops *ops;
+ struct pci_ops *my_ops;
int domain;
+ int rv;
spin_lock_irqsave(&inject_lock, flags);
if (size != sizeof(u32))
}
out:
ops = __find_pci_bus_ops(bus);
+ /*
+ * pci_lock must already be held, so we can directly
+ * manipulate bus->ops. Many config access functions,
+ * including pci_generic_config_read() require the original
+ * bus->ops be installed to function, so temporarily put them
+ * back.
+ */
+ my_ops = bus->ops;
+ bus->ops = ops;
+ rv = ops->read(bus, devfn, where, size, val);
+ bus->ops = my_ops;
spin_unlock_irqrestore(&inject_lock, flags);
- return ops->read(bus, devfn, where, size, val);
+ return rv;
}
-static int pci_write_aer(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
+static int aer_inj_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
{
u32 *sim;
struct aer_error *err;
unsigned long flags;
int rw1cs;
struct pci_ops *ops;
+ struct pci_ops *my_ops;
int domain;
+ int rv;
spin_lock_irqsave(&inject_lock, flags);
if (size != sizeof(u32))
}
out:
ops = __find_pci_bus_ops(bus);
+ /*
+ * pci_lock must already be held, so we can directly
+ * manipulate bus->ops. Many config access functions,
+ * including pci_generic_config_write() require the original
+ * bus->ops be installed to function, so temporarily put them
+ * back.
+ */
+ my_ops = bus->ops;
+ bus->ops = ops;
+ rv = ops->write(bus, devfn, where, size, val);
+ bus->ops = my_ops;
spin_unlock_irqrestore(&inject_lock, flags);
- return ops->write(bus, devfn, where, size, val);
+ return rv;
}
-static struct pci_ops pci_ops_aer = {
- .read = pci_read_aer,
- .write = pci_write_aer,
+static struct pci_ops aer_inj_pci_ops = {
+ .read = aer_inj_read_config,
+ .write = aer_inj_write_config,
};
static void pci_bus_ops_init(struct pci_bus_ops *bus_ops,
bus_ops = kmalloc(sizeof(*bus_ops), GFP_KERNEL);
if (!bus_ops)
return -ENOMEM;
- ops = pci_bus_set_ops(bus, &pci_ops_aer);
+ ops = pci_bus_set_ops(bus, &aer_inj_pci_ops);
spin_lock_irqsave(&inject_lock, flags);
- if (ops == &pci_ops_aer)
+ if (ops == &aer_inj_pci_ops)
goto out;
pci_bus_ops_init(bus_ops, bus, ops);
list_add(&bus_ops->list, &pci_bus_ops_list);
return -ENODEV;
rpdev = pcie_find_root_port(dev);
if (!rpdev) {
+ dev_err(&dev->dev, "aer_inject: Root port not found\n");
ret = -ENODEV;
goto out_put;
}
pos_cap_err = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!pos_cap_err) {
- ret = -EPERM;
+ dev_err(&dev->dev, "aer_inject: Device doesn't support AER\n");
+ ret = -EPROTONOSUPPORT;
goto out_put;
}
pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever);
rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR);
if (!rp_pos_cap_err) {
- ret = -EPERM;
+ dev_err(&rpdev->dev,
+ "aer_inject: Root port doesn't support AER\n");
+ ret = -EPROTONOSUPPORT;
goto out_put;
}
if (!aer_mask_override && einj->cor_status &&
!(einj->cor_status & ~cor_mask)) {
ret = -EINVAL;
- printk(KERN_WARNING "The correctable error(s) is masked by device\n");
+ dev_warn(&dev->dev,
+ "aer_inject: The correctable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
if (!aer_mask_override && einj->uncor_status &&
!(einj->uncor_status & ~uncor_mask)) {
ret = -EINVAL;
- printk(KERN_WARNING "The uncorrectable error(s) is masked by device\n");
+ dev_warn(&dev->dev,
+ "aer_inject: The uncorrectable error(s) is masked by device\n");
spin_unlock_irqrestore(&inject_lock, flags);
goto out_put;
}
if (find_aer_device(rpdev, &edev)) {
if (!get_service_data(edev)) {
- printk(KERN_WARNING "AER service is not initialized\n");
- ret = -EINVAL;
+ dev_warn(&edev->device,
+ "aer_inject: AER service is not initialized\n");
+ ret = -EPROTONOSUPPORT;
goto out_put;
}
+ dev_info(&edev->device,
+ "aer_inject: Injecting errors %08x/%08x into device %s\n",
+ einj->cor_status, einj->uncor_status, pci_name(dev));
aer_irq(-1, edev);
- } else
- ret = -EINVAL;
+ } else {
+ dev_err(&rpdev->dev, "aer_inject: AER device not found\n");
+ ret = -ENODEV;
+ }
out_put:
kfree(err_alloc);
kfree(rperr_alloc);
{
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
- bool wakeup;
+ bool wakeup, wake_irq_enabled = false;
int ret;
if (device_may_wakeup(&port->dev)) {
spin_lock_irq(&data->lock);
if (wakeup) {
ret = enable_irq_wake(srv->irq);
- data->suspend_level = PME_SUSPEND_WAKEUP;
+ if (ret == 0) {
+ data->suspend_level = PME_SUSPEND_WAKEUP;
+ wake_irq_enabled = true;
+ }
}
- if (!wakeup || ret) {
- struct pci_dev *port = srv->port;
-
+ if (!wake_irq_enabled) {
pcie_pme_interrupt_enable(port, false);
pcie_clear_root_pme_status(port);
data->suspend_level = PME_SUSPEND_NOIRQ;
#include <linux/pci-aspm.h>
#include <linux/aer.h>
#include <linux/acpi.h>
-#include <asm-generic/pci-bridge.h>
+#include <linux/irqdomain.h>
#include "pci.h"
#define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */
u16 orig_cmd;
struct pci_bus_region region, inverted_region;
+ if (dev->non_compliant_bars)
+ return 0;
+
mask = type ? PCI_ROM_ADDRESS_MASK : ~0;
/* No printks while decoding is disabled! */
if (!d)
d = pci_host_bridge_acpi_msi_domain(bus);
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+ /*
+ * If no IRQ domain was found via the OF tree, try looking it up
+ * directly through the fwnode_handle.
+ */
+ if (!d) {
+ struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus);
+
+ if (fwnode)
+ d = irq_find_matching_fwnode(fwnode,
+ DOMAIN_BUS_PCI_MSI);
+ }
+#endif
+
return d;
}
pcibios_add_bus(child);
+ if (child->ops->add_bus) {
+ ret = child->ops->add_bus(child);
+ if (WARN_ON(ret < 0))
+ dev_err(&child->dev, "failed to add bus: %d\n", ret);
+ }
+
/* Create legacy_io and legacy_mem files for this bus */
pci_create_legacy_files(child);
int pci_setup_device(struct pci_dev *dev)
{
u32 class;
+ u16 cmd;
u8 hdr_type;
int pos = 0;
struct pci_bus_region region;
/* device class may be changed after fixup */
class = dev->class >> 8;
+ if (dev->non_compliant_bars) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ dev_info(&dev->dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
+ cmd &= ~PCI_COMMAND_IO;
+ cmd &= ~PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ }
+
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
if (class == PCI_CLASS_BRIDGE_PCI)
pci_pm_init(dev);
/* Vital Product Data */
- pci_vpd_pci22_init(dev);
+ pci_vpd_init(dev);
/* Alternative Routing-ID Forwarding */
pci_configure_ari(dev);
return 0;
if (pci_pcie_type(parent) == PCI_EXP_TYPE_ROOT_PORT)
return 1;
+
+ /*
+ * PCIe downstream ports are bridges that normally lead to only a
+ * device 0, but if PCI_SCAN_ALL_PCIE_DEVS is set, scan all
+ * possible devices, not just device 0. See PCIe spec r3.0,
+ * sec 7.3.1.
+ */
if (parent->has_secondary_link &&
!pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS))
return 1;
u32 class = pdev->class;
/* Use "USB Device (not host controller)" class */
- pdev->class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe;
+ pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
class, pdev->class);
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+/*
+ * If a device follows the VPD format spec, the PCI core will not read or
+ * write past the VPD End Tag. But some vendors do not follow the VPD
+ * format spec, so we can't tell how much data is safe to access. Devices
+ * may behave unpredictably if we access too much. Blacklist these devices
+ * so we don't touch VPD at all.
+ */
+static void quirk_blacklist_vpd(struct pci_dev *dev)
+{
+ if (dev->vpd) {
+ dev->vpd->len = 0;
+ dev_warn(&dev->dev, FW_BUG "VPD access disabled\n");
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
+ quirk_blacklist_vpd);
+
/*
* For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
* VPD end tag will hang the device. This problem was initially
#endif
}
+static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * Cavium devices matching this quirk do not perform peer-to-peer
+ * with other functions, allowing masking out these bits as if they
+ * were unimplemented in the ACS capability.
+ */
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
+ PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+
+ return acs_flags ? 0 : 1;
+}
+
/*
* Many Intel PCH root ports do provide ACS-like features to disable peer
* transactions and validate bus numbers in requests, but do not provide an
{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
{ 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */
{ 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
+ /* Cavium ThunderX */
+ { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
{ 0 }
};
{
int i;
- pci_cleanup_rom(dev);
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *res = dev->resource + i;
if (res->parent)
pci_bus_release_busn_res(bus);
up_write(&pci_bus_sem);
pci_remove_legacy_files(bus);
+
+ if (bus->ops->remove_bus)
+ bus->ops->remove_bus(bus);
+
pcibios_remove_bus(bus);
device_unregister(&bus->dev);
}
*/
int pci_enable_rom(struct pci_dev *pdev)
{
- struct resource *res = pdev->resource + PCI_ROM_RESOURCE;
+ struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
struct pci_bus_region region;
u32 rom_addr;
if (!res->flags)
return -1;
+ /* Nothing to enable if we're using a shadow copy in RAM */
+ if (res->flags & IORESOURCE_ROM_SHADOW)
+ return 0;
+
pcibios_resource_to_bus(pdev->bus, ®ion, res);
pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
rom_addr &= ~PCI_ROM_ADDRESS_MASK;
*/
void pci_disable_rom(struct pci_dev *pdev)
{
+ struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
u32 rom_addr;
+
+ if (res->flags & IORESOURCE_ROM_SHADOW)
+ return;
+
pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
rom_addr &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(pdev, pdev->rom_base_reg, rom_addr);
loff_t start;
void __iomem *rom;
- /*
- * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
- * memory map if the VGA enable bit of the Bridge Control register is
- * set for embedded VGA.
- */
- if (res->flags & IORESOURCE_ROM_SHADOW) {
- /* primary video rom always starts here */
- start = (loff_t)0xC0000;
- *size = 0x20000; /* cover C000:0 through E000:0 */
- } else {
- if (res->flags &
- (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) {
- *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
- return (void __iomem *)(unsigned long)
- pci_resource_start(pdev, PCI_ROM_RESOURCE);
- } else {
- /* assign the ROM an address if it doesn't have one */
- if (res->parent == NULL &&
- pci_assign_resource(pdev, PCI_ROM_RESOURCE))
- return NULL;
- start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
- *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
- if (*size == 0)
- return NULL;
-
- /* Enable ROM space decodes */
- if (pci_enable_rom(pdev))
- return NULL;
- }
- }
+ /* assign the ROM an address if it doesn't have one */
+ if (res->parent == NULL && pci_assign_resource(pdev, PCI_ROM_RESOURCE))
+ return NULL;
+
+ start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
+ *size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
+ if (*size == 0)
+ return NULL;
+
+ /* Enable ROM space decodes */
+ if (pci_enable_rom(pdev))
+ return NULL;
rom = ioremap(start, *size);
if (!rom) {
/* restore enable if ioremap fails */
- if (!(res->flags & (IORESOURCE_ROM_ENABLE |
- IORESOURCE_ROM_SHADOW |
- IORESOURCE_ROM_COPY)))
+ if (!(res->flags & IORESOURCE_ROM_ENABLE))
pci_disable_rom(pdev);
return NULL;
}
{
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
- if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY))
- return;
-
iounmap(rom);
- /* Disable again before continuing, leave enabled if pci=rom */
- if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW)))
+ /* Disable again before continuing */
+ if (!(res->flags & IORESOURCE_ROM_ENABLE))
pci_disable_rom(pdev);
}
EXPORT_SYMBOL(pci_unmap_rom);
-/**
- * pci_cleanup_rom - free the ROM copy created by pci_map_rom_copy
- * @pdev: pointer to pci device struct
- *
- * Free the copied ROM if we allocated one.
- */
-void pci_cleanup_rom(struct pci_dev *pdev)
-{
- struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
-
- if (res->flags & IORESOURCE_ROM_COPY) {
- kfree((void *)(unsigned long)res->start);
- res->flags |= IORESOURCE_UNSET;
- res->flags &= ~IORESOURCE_ROM_COPY;
- res->start = 0;
- res->end = 0;
- }
-}
-
/**
* pci_platform_rom - provides a pointer to any ROM image provided by the
* platform
#include <linux/ioport.h>
#include <linux/cache.h>
#include <linux/slab.h>
-#include <asm-generic/pci-bridge.h>
#include "pci.h"
unsigned int pci_flags;
resource_size_t align, size;
int ret;
+ if (res->flags & IORESOURCE_PCI_FIXED)
+ return 0;
+
res->flags |= IORESOURCE_UNSET;
align = pci_resource_alignment(dev, res);
if (!align) {
resource_size_t new_size;
int ret;
+ if (res->flags & IORESOURCE_PCI_FIXED)
+ return 0;
+
flags = res->flags;
res->flags |= IORESOURCE_UNSET;
if (!res->parent) {
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/pci.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#include <asm/macio.h>
#include <scsi/scsi.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
+#include <linux/pci.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
-#include <asm/pci-bridge.h>
#include <asm/macio.h>
#include <scsi/scsi.h>
#ifdef CONFIG_PPC_PMAC
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
-#include <asm/pci-bridge.h>
#include <asm/prom.h>
#endif
static const struct pci_device_id pci_id[] = {
{
PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x2096),
- .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = 0xffffffff,
},
{},
/*-------------------------------------------------------------------------*/
static const struct pci_device_id pci_ids[] = { {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = ~0,
.vendor = 0x102f, /* Toshiba */
.device = 0x0107, /* this UDC */
/*-------------------------------------------------------------------------*/
static const struct pci_device_id pci_ids[] = { {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX_LEGACY,
.device = 0x2280,
.subdevice = PCI_ANY_ID,
.driver_data = PLX_LEGACY | PLX_2280,
}, {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX_LEGACY,
.device = 0x2282,
.driver_data = PLX_LEGACY,
},
{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX,
.device = 0x3380,
.driver_data = PLX_SUPERSPEED,
},
{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_PLX,
.device = 0x3382,
{
PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
- .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = 0xffffffff,
},
{
PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
- .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = 0xffffffff,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7213_IOH_UDC),
- .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = 0xffffffff,
},
{
PCI_DEVICE(PCI_VENDOR_ID_ROHM, PCI_DEVICE_ID_ML7831_IOH_UDC),
- .class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+ .class = PCI_CLASS_SERIAL_USB_DEVICE,
.class_mask = 0xffffffff,
},
{ 0 },
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#include "../macmodes.h"
#endif
#ifdef CONFIG_PPC
-#include <asm/pci-bridge.h>
#include "../macmodes.h"
#ifdef CONFIG_BOOTX_TEXT
#if defined(CONFIG_PPC)
#include <linux/nvram.h>
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#include "macmodes.h"
#endif
#if defined(CONFIG_PPC_PMAC)
#include <asm/prom.h>
-#include <asm/pci-bridge.h>
#include "../macmodes.h"
#endif
#include <linux/pci.h>
#include <asm/io.h>
-#ifdef CONFIG_PPC64
-#include <asm/pci-bridge.h>
-#endif
-
#ifdef CONFIG_PPC32
#include <asm/bootx.h>
#endif
/* Qumranet donated their vendor ID for devices 0x1000 thru 0x10FF. */
static const struct pci_device_id virtio_pci_id_table[] = {
- { PCI_DEVICE(0x1af4, PCI_ANY_ID) },
+ { PCI_DEVICE(PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_ANY_ID) },
{ 0 }
};
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_GENERIC_PCI_BRIDGE_H
-#define _ASM_GENERIC_PCI_BRIDGE_H
-
-#ifdef __KERNEL__
-
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-
- /* PCIe downstream ports are bridges that normally lead to only a
- * device 0, but if this is set, we scan all possible devices, not
- * just device 0.
- */
- PCI_SCAN_ALL_PCIE_DEVS = 0x00000040,
-};
-
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline void pci_clear_flags(int flags)
-{
- pci_flags &= ~flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return pci_flags & flag;
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline void pci_clear_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
+++ /dev/null
-/* include this file if the platform implements the dma_ DMA Mapping API
- * and wants to provide the pci_ DMA Mapping API in terms of it */
-
-#ifndef _ASM_GENERIC_PCI_DMA_COMPAT_H
-#define _ASM_GENERIC_PCI_DMA_COMPAT_H
-
-#include <linux/dma-mapping.h>
-
-static inline void *
-pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle)
-{
- return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void *
-pci_zalloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle)
-{
- return dma_zalloc_coherent(hwdev == NULL ? NULL : &hwdev->dev,
- size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void
-pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
-{
- dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t
-pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
-{
- return dma_map_single(hwdev == NULL ? NULL : &hwdev->dev, ptr, size, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
- size_t size, int direction)
-{
- dma_unmap_single(hwdev == NULL ? NULL : &hwdev->dev, dma_addr, size, (enum dma_data_direction)direction);
-}
-
-static inline dma_addr_t
-pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- return dma_map_page(hwdev == NULL ? NULL : &hwdev->dev, page, offset, size, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
- size_t size, int direction)
-{
- dma_unmap_page(hwdev == NULL ? NULL : &hwdev->dev, dma_address, size, (enum dma_data_direction)direction);
-}
-
-static inline int
-pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
- return dma_map_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
- dma_unmap_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
- size_t size, int direction)
-{
- dma_sync_single_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
- size_t size, int direction)
-{
- dma_sync_single_for_device(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
- int nelems, int direction)
-{
- dma_sync_sg_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
-}
-
-static inline void
-pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
- int nelems, int direction)
-{
- dma_sync_sg_for_device(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
-}
-
-static inline int
-pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
-{
- return dma_mapping_error(&pdev->dev, dma_addr);
-}
-
-#ifdef CONFIG_PCI
-static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{
- return dma_set_mask(&dev->dev, mask);
-}
-
-static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{
- return dma_set_coherent_mask(&dev->dev, mask);
-}
-#endif
-
-#endif
/* PCI ROM control bits (IORESOURCE_BITS) */
#define IORESOURCE_ROM_ENABLE (1<<0) /* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */
-#define IORESOURCE_ROM_SHADOW (1<<1) /* ROM is copy at C000:0 */
-#define IORESOURCE_ROM_COPY (1<<2) /* ROM is alloc'd copy, resource field overlaid */
-#define IORESOURCE_ROM_BIOS_COPY (1<<3) /* ROM is BIOS copy, resource field overlaid */
+#define IORESOURCE_ROM_SHADOW (1<<1) /* Use RAM image, not ROM BAR */
/* PCI control bits. Shares IORESOURCE_BITS with above PCI ROM. */
#define IORESOURCE_PCI_FIXED (1<<4) /* Do not move resource */
--- /dev/null
+/* include this file if the platform implements the dma_ DMA Mapping API
+ * and wants to provide the pci_ DMA Mapping API in terms of it */
+
+#ifndef _ASM_GENERIC_PCI_DMA_COMPAT_H
+#define _ASM_GENERIC_PCI_DMA_COMPAT_H
+
+#include <linux/dma-mapping.h>
+
+/* This defines the direction arg to the DMA mapping routines. */
+#define PCI_DMA_BIDIRECTIONAL 0
+#define PCI_DMA_TODEVICE 1
+#define PCI_DMA_FROMDEVICE 2
+#define PCI_DMA_NONE 3
+
+static inline void *
+pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ return dma_alloc_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void *
+pci_zalloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ return dma_zalloc_coherent(hwdev == NULL ? NULL : &hwdev->dev,
+ size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void
+pci_free_consistent(struct pci_dev *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ dma_free_coherent(hwdev == NULL ? NULL : &hwdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t
+pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
+{
+ return dma_map_single(hwdev == NULL ? NULL : &hwdev->dev, ptr, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+ size_t size, int direction)
+{
+ dma_unmap_single(hwdev == NULL ? NULL : &hwdev->dev, dma_addr, size, (enum dma_data_direction)direction);
+}
+
+static inline dma_addr_t
+pci_map_page(struct pci_dev *hwdev, struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ return dma_map_page(hwdev == NULL ? NULL : &hwdev->dev, page, offset, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
+ size_t size, int direction)
+{
+ dma_unmap_page(hwdev == NULL ? NULL : &hwdev->dev, dma_address, size, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ return dma_map_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nents, int direction)
+{
+ dma_unmap_sg(hwdev == NULL ? NULL : &hwdev->dev, sg, nents, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+ dma_sync_single_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+ dma_sync_single_for_device(hwdev == NULL ? NULL : &hwdev->dev, dma_handle, size, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+ dma_sync_sg_for_cpu(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline void
+pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg,
+ int nelems, int direction)
+{
+ dma_sync_sg_for_device(hwdev == NULL ? NULL : &hwdev->dev, sg, nelems, (enum dma_data_direction)direction);
+}
+
+static inline int
+pci_dma_mapping_error(struct pci_dev *pdev, dma_addr_t dma_addr)
+{
+ return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return dma_set_mask(&dev->dev, mask);
+}
+
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return dma_set_coherent_mask(&dev->dev, mask);
+}
+
+static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
+ unsigned int size)
+{
+ return dma_set_max_seg_size(&dev->dev, size);
+}
+
+static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
+ unsigned long mask)
+{
+ return dma_set_seg_boundary(&dev->dev, mask);
+}
+#else
+static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{ return -EIO; }
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{ return -EIO; }
+static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
+ unsigned int size)
+{ return -EIO; }
+static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
+ unsigned long mask)
+{ return -EIO; }
+#endif
+
+#endif
pci_mmap_mem
};
-/* This defines the direction arg to the DMA mapping routines. */
-#define PCI_DMA_BIDIRECTIONAL 0
-#define PCI_DMA_TODEVICE 1
-#define PCI_DMA_FROMDEVICE 2
-#define PCI_DMA_NONE 3
-
/*
* For PCI devices, the region numbers are assigned this way:
*/
unsigned int io_window_1k:1; /* Intel P2P bridge 1K I/O windows */
unsigned int irq_managed:1;
unsigned int has_secondary_link:1;
+ unsigned int non_compliant_bars:1; /* broken BARs; ignore them */
pci_dev_flags_t dev_flags;
atomic_t enable_cnt; /* pci_enable_device has been called */
/* Low-level architecture-dependent routines */
struct pci_ops {
+ int (*add_bus)(struct pci_bus *bus);
+ void (*remove_bus)(struct pci_bus *bus);
void __iomem *(*map_bus)(struct pci_bus *bus, unsigned int devfn, int where);
int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+enum {
+ PCI_REASSIGN_ALL_RSRC = 0x00000001, /* ignore firmware setup */
+ PCI_REASSIGN_ALL_BUS = 0x00000002, /* reassign all bus numbers */
+ PCI_PROBE_ONLY = 0x00000004, /* use existing setup */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, /* don't do ISA alignment */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010, /* enable domains in /proc */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020, /* ... except domain 0 */
+ PCI_SCAN_ALL_PCIE_DEVS = 0x00000040, /* scan all, not just dev 0 */
+};
+
/* these external functions are only available when PCI support is enabled */
#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags) { pci_flags = flags; }
+static inline void pci_add_flags(int flags) { pci_flags |= flags; }
+static inline void pci_clear_flags(int flags) { pci_flags &= ~flags; }
+static inline int pci_has_flag(int flag) { return pci_flags & flag; }
+
void pcie_bus_configure_settings(struct pci_bus *bus);
enum pcie_bus_config_types {
bool pci_intx_mask_supported(struct pci_dev *dev);
bool pci_check_and_mask_intx(struct pci_dev *dev);
bool pci_check_and_unmask_intx(struct pci_dev *dev);
-int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size);
-int pci_set_dma_seg_boundary(struct pci_dev *dev, unsigned long mask);
int pci_wait_for_pending(struct pci_dev *dev, int pos, u16 mask);
int pci_wait_for_pending_transaction(struct pci_dev *dev);
int pcix_get_max_mmrbc(struct pci_dev *dev);
int pci_set_vga_state(struct pci_dev *pdev, bool decode,
unsigned int command_bits, u32 flags);
+
/* kmem_cache style wrapper around pci_alloc_consistent() */
#include <linux/pci-dma.h>
#else /* CONFIG_PCI is not enabled */
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline void pci_clear_flags(int flags) { }
+static inline int pci_has_flag(int flag) { return 0; }
+
/*
* If the system does not have PCI, clearly these return errors. Define
* these as simple inline functions to avoid hair in drivers.
static inline void pci_set_master(struct pci_dev *dev) { }
static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; }
static inline void pci_disable_device(struct pci_dev *dev) { }
-static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
-{ return -EIO; }
-static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
-{ return -EIO; }
-static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
- unsigned int size)
-{ return -EIO; }
-static inline int pci_set_dma_seg_boundary(struct pci_dev *dev,
- unsigned long mask)
-{ return -EIO; }
static inline int pci_assign_resource(struct pci_dev *dev, int i)
{ return -EBUSY; }
static inline int __pci_register_driver(struct pci_driver *drv,
#include <asm/pci.h>
+#ifndef pci_root_bus_fwnode
+#define pci_root_bus_fwnode(bus) NULL
+#endif
+
/* these helpers provide future and backwards compatibility
* for accessing popular PCI BAR info */
#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
#define PCI_VPD_LRDT_RW_DATA PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
/* Small Resource Data Type Tag Item Names */
-#define PCI_VPD_STIN_END 0x78 /* End */
+#define PCI_VPD_STIN_END 0x0f /* End */
-#define PCI_VPD_SRDT_END PCI_VPD_STIN_END
+#define PCI_VPD_SRDT_END (PCI_VPD_STIN_END << 3)
#define PCI_VPD_SRDT_TIN_MASK 0x78
#define PCI_VPD_SRDT_LEN_MASK 0x07
+#define PCI_VPD_LRDT_TIN_MASK 0x7f
#define PCI_VPD_LRDT_TAG_SIZE 3
#define PCI_VPD_SRDT_TAG_SIZE 1
return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
}
+/**
+ * pci_vpd_lrdt_tag - Extracts the Large Resource Data Type Tag Item
+ * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
+ *
+ * Returns the extracted Large Resource Data Type Tag item.
+ */
+static inline u16 pci_vpd_lrdt_tag(const u8 *lrdt)
+{
+ return (u16)(lrdt[0] & PCI_VPD_LRDT_TIN_MASK);
+}
+
/**
* pci_vpd_srdt_size - Extracts the Small Resource Data Type length
* @lrdt: Pointer to the beginning of the Small Resource Data Type tag
return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
}
+/**
+ * pci_vpd_srdt_tag - Extracts the Small Resource Data Type Tag Item
+ * @lrdt: Pointer to the beginning of the Small Resource Data Type tag
+ *
+ * Returns the extracted Small Resource Data Type Tag Item.
+ */
+static inline u8 pci_vpd_srdt_tag(const u8 *srdt)
+{
+ return ((*srdt) & PCI_VPD_SRDT_TIN_MASK) >> 3;
+}
+
/**
* pci_vpd_info_field_size - Extracts the information field length
* @lrdt: Pointer to the beginning of an information field header
{
return bus->self && bus->self->ari_enabled;
}
+
+/* provide the legacy pci_dma_* API */
+#include <linux/pci-dma-compat.h>
+
#endif /* LINUX_PCI_H */
#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
+#define PCI_CLASS_SERIAL_USB_DEVICE 0x0c03fe
#define PCI_CLASS_SERIAL_FIBER 0x0c04
#define PCI_CLASS_SERIAL_SMBUS 0x0c05
#define PCI_VENDOR_ID_AZWAVE 0x1a3b
+#define PCI_VENDOR_ID_REDHAT_QUMRANET 0x1af4
+#define PCI_SUBVENDOR_ID_REDHAT_QUMRANET 0x1af4
+#define PCI_SUBDEVICE_ID_QEMU 0x1100
+
#define PCI_VENDOR_ID_ASMEDIA 0x1b21
#define PCI_VENDOR_ID_CIRCUITCO 0x1cc8
goto fini;
/* check for known (emulated) devices */
- if (pci->subsystem_vendor == 0x1af4 &&
- pci->subsystem_device == 0x1100) {
+ if (pci->subsystem_vendor == PCI_SUBVENDOR_ID_REDHAT_QUMRANET &&
+ pci->subsystem_device == PCI_SUBDEVICE_ID_QEMU) {
/* KVM emulated sound, PCI SSID: 1af4:1100 */
msg = "enable KVM";
} else if (pci->subsystem_vendor == 0x1ab8) {
#include "pmac.h"
#include <sound/pcm_params.h>
#include <asm/pmac_feature.h>
-#include <asm/pci-bridge.h>
/* fixed frequency table for awacs, screamer, burgundy, DACA (44100 max) */
projects / linux-2.6-microblaze.git / commitdiff