[SCSI] TYPE_RBC cache fixes (sbp2.c affected)

	a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h
	b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off
	c) relevant places in midlayer and sd.c taught to accept TYPE_RBC
	d) sd.c::sd_read_cache_type() looks into page 6 when dealing with
TYPE_RBC - these guys have writeback cache flag there and are not guaranteed
to have page 8 at all.
	e) sd_read_cache_type() got an extra sanity check - it checks that
it got the page it asked for before using its contents.  And screams if
mismatch had happened.  Rationale: there are broken devices out there that
are "helpful" enough to go for "I don't have a page you've asked for, here,
have another one".  For example, PL3507 had been caught doing just that...
	f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead
of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions
in there are gone now.

	Incidentally, I wonder if USB storage devices that have no
mode page 8 are simply RBC ones.  I haven't touched that, but it might
be interesting to check...

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 00c7b95..094e646 100644 (file)
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1070,7 +1070,7 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid, quadlet_
 static __inline__ int sbp2_command_conversion_device_type(u8 device_type)
 {
        return (((device_type == TYPE_DISK) ||
-                (device_type == TYPE_SDAD) ||
+                (device_type == TYPE_RBC) ||
                 (device_type == TYPE_ROM)) ? 1:0);
 }
 
@@ -2111,102 +2111,6 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
  */
 static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd)
 {
-       unchar new_cmd[16];
-       u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
-
-       SBP2_DEBUG("sbp2_check_sbp2_command");
-
-       switch (*cmd) {
-
-               case READ_6:
-
-                       if (sbp2_command_conversion_device_type(device_type)) {
-
-                               SBP2_DEBUG("Convert READ_6 to READ_10");
-
-                               /*
-                                * Need to turn read_6 into read_10
-                                */
-                               new_cmd[0] = 0x28;
-                               new_cmd[1] = (cmd[1] & 0xe0);
-                               new_cmd[2] = 0x0;
-                               new_cmd[3] = (cmd[1] & 0x1f);
-                               new_cmd[4] = cmd[2];
-                               new_cmd[5] = cmd[3];
-                               new_cmd[6] = 0x0;
-                               new_cmd[7] = 0x0;
-                               new_cmd[8] = cmd[4];
-                               new_cmd[9] = cmd[5];
-
-                               memcpy(cmd, new_cmd, 10);
-
-                       }
-
-                       break;
-
-               case WRITE_6:
-
-                       if (sbp2_command_conversion_device_type(device_type)) {
-
-                               SBP2_DEBUG("Convert WRITE_6 to WRITE_10");
-
-                               /*
-                                * Need to turn write_6 into write_10
-                                */
-                               new_cmd[0] = 0x2a;
-                               new_cmd[1] = (cmd[1] & 0xe0);
-                               new_cmd[2] = 0x0;
-                               new_cmd[3] = (cmd[1] & 0x1f);
-                               new_cmd[4] = cmd[2];
-                               new_cmd[5] = cmd[3];
-                               new_cmd[6] = 0x0;
-                               new_cmd[7] = 0x0;
-                               new_cmd[8] = cmd[4];
-                               new_cmd[9] = cmd[5];
-
-                               memcpy(cmd, new_cmd, 10);
-
-                       }
-
-                       break;
-
-               case MODE_SENSE:
-
-                       if (sbp2_command_conversion_device_type(device_type)) {
-
-                               SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10");
-
-                               /*
-                                * Need to turn mode_sense_6 into mode_sense_10
-                                */
-                               new_cmd[0] = 0x5a;
-                               new_cmd[1] = cmd[1];
-                               new_cmd[2] = cmd[2];
-                               new_cmd[3] = 0x0;
-                               new_cmd[4] = 0x0;
-                               new_cmd[5] = 0x0;
-                               new_cmd[6] = 0x0;
-                               new_cmd[7] = 0x0;
-                               new_cmd[8] = cmd[4];
-                               new_cmd[9] = cmd[5];
-
-                               memcpy(cmd, new_cmd, 10);
-
-                       }
-
-                       break;
-
-               case MODE_SELECT:
-
-                       /*
-                        * TODO. Probably need to change mode select to 10 byte version
-                        */
-
-               default:
-                       break;
-       }
-
-       return;
 }
 
 /*
@@ -2271,14 +2175,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
                                scsi_buf[4] = 36 - 5;
                        }
 
-                       /*
-                        * Check for Simple Direct Access Device and change it to TYPE_DISK
-                        */
-                       if ((scsi_buf[0] & 0x1f) == TYPE_SDAD) {
-                               SBP2_DEBUG("Changing TYPE_SDAD to TYPE_DISK");
-                               scsi_buf[0] &= 0xe0;
-                       }
-
                        /*
                         * Fix ansi revision and response data format
                         */
@@ -2287,27 +2183,6 @@ static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
 
                        break;
 
-               case MODE_SENSE:
-
-                       if (sbp2_command_conversion_device_type(device_type)) {
-
-                               SBP2_DEBUG("Modify mode sense response (10 byte version)");
-
-                               scsi_buf[0] = scsi_buf[1];      /* Mode data length */
-                               scsi_buf[1] = scsi_buf[2];      /* Medium type */
-                               scsi_buf[2] = scsi_buf[3];      /* Device specific parameter */
-                               scsi_buf[3] = scsi_buf[7];      /* Block descriptor length */
-                               memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]);
-                       }
-
-                       break;
-
-               case MODE_SELECT:
-
-                       /*
-                        * TODO. Probably need to change mode select to 10 byte version
-                        */
-
                default:
                        break;
        }
@@ -2690,7 +2565,8 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 static int sbp2scsi_slave_configure (struct scsi_device *sdev)
 {
        blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
-
+       sdev->use_10_for_rw = 1;
+       sdev->use_10_for_ms = 1;
        return 0;
 }
 

diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index a84b039..cd425be 100644 (file)
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -266,10 +266,6 @@ struct sbp2_status_block {
 #define SBP2_MAX_UDS_PER_NODE          16      /* Maximum scsi devices per node */
 #define SBP2_MAX_SECTORS               255     /* Max sectors supported */
 
-#ifndef TYPE_SDAD
-#define TYPE_SDAD                      0x0e    /* simplified direct access device */
-#endif
-
 /*
  * SCSI direction table...
  * (now used as a back-up in case the direction passed down from above is "unknown")

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index cca7726..5886115 100644 (file)
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -625,6 +625,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
        case TYPE_MEDIUM_CHANGER:
        case TYPE_ENCLOSURE:
        case TYPE_COMM:
+       case TYPE_RBC:
                sdev->writeable = 1;
                break;
        case TYPE_WORM:

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 19afb25..bb82355 100644 (file)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1368,17 +1368,26 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, char *diskname,
  */
 static void
 sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
-                  struct scsi_request *SRpnt, unsigned char *buffer) {
+                  struct scsi_request *SRpnt, unsigned char *buffer)
+{
        int len = 0, res;
 
-       const int dbd = 0;         /* DBD */
-       const int modepage = 0x08; /* current values, cache page */
+       int dbd;
+       int modepage;
        struct scsi_mode_data data;
        struct scsi_sense_hdr sshdr;
 
        if (sdkp->device->skip_ms_page_8)
                goto defaults;
 
+       if (sdkp->device->type == TYPE_RBC) {
+               modepage = 6;
+               dbd = 8;
+       } else {
+               modepage = 8;
+               dbd = 0;
+       }
+
        /* cautiously ask */
        res = sd_do_mode_sense(SRpnt, dbd, modepage, buffer, 4, &data);
 
@@ -1409,11 +1418,20 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
                        "write back, no read (daft)"
                };
                int ct = 0;
-               int offset = data.header_length +
-                       data.block_descriptor_length + 2;
+               int offset = data.header_length + data.block_descriptor_length;
 
-               sdkp->WCE = ((buffer[offset] & 0x04) != 0);
-               sdkp->RCD = ((buffer[offset] & 0x01) != 0);
+               if ((buffer[offset] & 0x3f) != modepage) {
+                       printk(KERN_ERR "%s: got wrong page\n", diskname);
+                       goto defaults;
+               }
+
+               if (modepage == 8) {
+                       sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
+                       sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
+               } else {
+                       sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
+                       sdkp->RCD = 0;
+               }
 
                ct =  sdkp->RCD + 2*sdkp->WCE;
 
@@ -1533,7 +1551,7 @@ static int sd_probe(struct device *dev)
        int error;
 
        error = -ENODEV;
-       if ((sdp->type != TYPE_DISK) && (sdp->type != TYPE_MOD))
+       if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
                goto out;
 
        SCSI_LOG_HLQUEUE(3, printk("sd_attach: scsi device: <%d,%d,%d,%d>\n", 
@@ -1570,7 +1588,7 @@ static int sd_probe(struct device *dev)
        sdkp->openers = 0;
 
        if (!sdp->timeout) {
-               if (sdp->type == TYPE_DISK)
+               if (sdp->type != TYPE_MOD)
                        sdp->timeout = SD_TIMEOUT;
                else
                        sdp->timeout = SD_MOD_TIMEOUT;

diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index ca1e3b4..1fb2337 100644 (file)
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -213,6 +213,7 @@ static inline int scsi_status_is_good(int status)
 #define TYPE_COMM           0x09    /* Communications device */
 #define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
 #define TYPE_RAID           0x0c
+#define TYPE_RBC           0x0e
 #define TYPE_NO_LUN         0x7f
 
 /*