RISC-V: clarify what some RISCV_ISA* config options do

During some discussion on IRC yesterday and on Pu's bpf patch [1]
I noticed that these RISCV_ISA* Kconfig options are not really clear
about their implications. Many of these options have no impact on what
userspace is allowed to do, for example an application can use Zbb
regardless of whether or not the kernel does. Change the help text to
try and clarify whether or not an option affects just the kernel, or
also userspace. None of these options actually control whether or not an
extension is detected dynamically as that's done regardless of Kconfig
options, so drop any text that implies the option is required for
dynamic detection, rewording them as "do x when y is detected".

Link: https://lore.kernel.org/linux-riscv/20240328-ferocity-repose-c554f75a676c@spud/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241024-overdue-slogan-0b0f69d3da91@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 6254594..278a38c 100644 (file)
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -527,7 +527,8 @@ config RISCV_ISA_C
        help
          Adds "C" to the ISA subsets that the toolchain is allowed to emit
          when building Linux, which results in compressed instructions in the
-         Linux binary.
+         Linux binary. This option produces a kernel that will not run on
+         systems that do not support compressed instructions.
 
          If you don't know what to do here, say Y.
 
@@ -537,8 +538,8 @@ config RISCV_ISA_SVNAPOT
        depends on RISCV_ALTERNATIVE
        default y
        help
-         Allow kernel to detect the Svnapot ISA-extension dynamically at boot
-         time and enable its usage.
+         Enable support for the Svnapot ISA-extension when it is detected
+         at boot.
 
          The Svnapot extension is used to mark contiguous PTEs as a range
          of contiguous virtual-to-physical translations for a naturally
@@ -556,9 +557,8 @@ config RISCV_ISA_SVPBMT
        depends on RISCV_ALTERNATIVE
        default y
        help
-          Adds support to dynamically detect the presence of the Svpbmt
-          ISA-extension (Supervisor-mode: page-based memory types) and
-          enable its usage.
+          Add support for the Svpbmt ISA-extension (Supervisor-mode:
+          page-based memory types) in the kernel when it is detected at boot.
 
           The memory type for a page contains a combination of attributes
           that indicate the cacheability, idempotency, and ordering
@@ -577,14 +577,15 @@ config TOOLCHAIN_HAS_V
        depends on AS_HAS_OPTION_ARCH
 
 config RISCV_ISA_V
-       bool "VECTOR extension support"
+       bool "Vector extension support"
        depends on TOOLCHAIN_HAS_V
        depends on FPU
        select DYNAMIC_SIGFRAME
        default y
        help
-         Say N here if you want to disable all vector related procedure
-         in the kernel.
+         Add support for the Vector extension when it is detected at boot.
+         When this option is disabled, neither the kernel nor userspace may
+         use vector procedures.
 
          If you don't know what to do here, say Y.
 
@@ -667,8 +668,8 @@ config RISCV_ISA_ZBB
        depends on RISCV_ALTERNATIVE
        default y
        help
-          Adds support to dynamically detect the presence of the ZBB
-          extension (basic bit manipulation) and enable its usage.
+          Add support for enabling optimisations in the kernel when the
+          Zbb extension is detected at boot.
 
           The Zbb extension provides instructions to accelerate a number
           of bit-specific operations (count bit population, sign extending,
@@ -707,9 +708,9 @@ config RISCV_ISA_ZICBOM
        select RISCV_DMA_NONCOHERENT
        select DMA_DIRECT_REMAP
        help
-          Adds support to dynamically detect the presence of the ZICBOM
-          extension (Cache Block Management Operations) and enable its
-          usage.
+          Add support for the Zicbom extension (Cache Block Management
+          Operations) and enable its use in the kernel when it is detected
+          at boot.
 
           The Zicbom extension can be used to handle for example
           non-coherent DMA support on devices that need it.
@@ -722,7 +723,7 @@ config RISCV_ISA_ZICBOZ
        default y
        help
           Enable the use of the Zicboz extension (cbo.zero instruction)
-          when available.
+          in the kernel when it is detected at boot.
 
           The Zicboz extension is used for faster zeroing of memory.
 
@@ -760,8 +761,9 @@ config FPU
        bool "FPU support"
        default y
        help
-         Say N here if you want to disable all floating-point related procedure
-         in the kernel.
+         Add support for floating point operations when an FPU is detected at
+         boot. When this option is disabled, neither the kernel nor userspace
+         may use the floating point unit.
 
          If you don't know what to do here, say Y.