mlxsw: reg: Add Management Temperature Bulk Register

Add MTBR (Management Temperature Bulk Register), which is used for port
temperature reading in a bulk mode.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index 1190a6a..13856f4 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -8001,6 +8001,80 @@ static inline void mlxsw_reg_mtmp_unpack(char *payload, unsigned int *p_temp,
                mlxsw_reg_mtmp_sensor_name_memcpy_from(payload, sensor_name);
 }
 
+/* MTBR - Management Temperature Bulk Register
+ * -------------------------------------------
+ * This register is used for bulk temperature reading.
+ */
+#define MLXSW_REG_MTBR_ID 0x900F
+#define MLXSW_REG_MTBR_BASE_LEN 0x10 /* base length, without records */
+#define MLXSW_REG_MTBR_REC_LEN 0x04 /* record length */
+#define MLXSW_REG_MTBR_REC_MAX_COUNT 47 /* firmware limitation */
+#define MLXSW_REG_MTBR_LEN (MLXSW_REG_MTBR_BASE_LEN +  \
+                           MLXSW_REG_MTBR_REC_LEN *    \
+                           MLXSW_REG_MTBR_REC_MAX_COUNT)
+
+MLXSW_REG_DEFINE(mtbr, MLXSW_REG_MTBR_ID, MLXSW_REG_MTBR_LEN);
+
+/* reg_mtbr_base_sensor_index
+ * Base sensors index to access (0 - ASIC sensor, 1-63 - ambient sensors,
+ * 64-127 are mapped to the SFP+/QSFP modules sequentially).
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mtbr, base_sensor_index, 0x00, 0, 7);
+
+/* reg_mtbr_num_rec
+ * Request: Number of records to read
+ * Response: Number of records read
+ * See above description for more details.
+ * Range 1..255
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, mtbr, num_rec, 0x04, 0, 8);
+
+/* reg_mtbr_rec_max_temp
+ * The highest measured temperature from the sensor.
+ * When the bit mte is cleared, the field max_temperature is reserved.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_max_temp, MLXSW_REG_MTBR_BASE_LEN, 16,
+                    16, MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+/* reg_mtbr_rec_temp
+ * Temperature reading from the sensor. Reading is in 0..125 Celsius
+ * degrees units.
+ * Access: RO
+ */
+MLXSW_ITEM32_INDEXED(reg, mtbr, rec_temp, MLXSW_REG_MTBR_BASE_LEN, 0, 16,
+                    MLXSW_REG_MTBR_REC_LEN, 0x00, false);
+
+static inline void mlxsw_reg_mtbr_pack(char *payload, u8 base_sensor_index,
+                                      u8 num_rec)
+{
+       MLXSW_REG_ZERO(mtbr, payload);
+       mlxsw_reg_mtbr_base_sensor_index_set(payload, base_sensor_index);
+       mlxsw_reg_mtbr_num_rec_set(payload, num_rec);
+}
+
+/* Error codes from temperatute reading */
+enum mlxsw_reg_mtbr_temp_status {
+       MLXSW_REG_MTBR_NO_CONN          = 0x8000,
+       MLXSW_REG_MTBR_NO_TEMP_SENS     = 0x8001,
+       MLXSW_REG_MTBR_INDEX_NA         = 0x8002,
+       MLXSW_REG_MTBR_BAD_SENS_INFO    = 0x8003,
+};
+
+/* Base index for reading modules temperature */
+#define MLXSW_REG_MTBR_BASE_MODULE_INDEX 64
+
+static inline void mlxsw_reg_mtbr_temp_unpack(char *payload, int rec_ind,
+                                             u16 *p_temp, u16 *p_max_temp)
+{
+       if (p_temp)
+               *p_temp = mlxsw_reg_mtbr_rec_temp_get(payload, rec_ind);
+       if (p_max_temp)
+               *p_max_temp = mlxsw_reg_mtbr_rec_max_temp_get(payload, rec_ind);
+}
+
 /* MCIA - Management Cable Info Access
  * -----------------------------------
  * MCIA register is used to access the SFP+ and QSFP connector's EPROM.
@@ -9779,6 +9853,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
        MLXSW_REG(mfsl),
        MLXSW_REG(mtcap),
        MLXSW_REG(mtmp),
+       MLXSW_REG(mtbr),
        MLXSW_REG(mcia),
        MLXSW_REG(mpat),
        MLXSW_REG(mpar),