--- /dev/null
+Marvell Distributed Switch Architecture Device Tree Bindings
+------------------------------------------------------------
+
+Required properties:
+- compatible : Should be "marvell,dsa"
+- #address-cells : Must be 2, first cell is the address on the MDIO bus
+ and second cell is the address in the switch tree.
+ Second cell is used only when cascading/chaining.
+- #size-cells : Must be 0
+- dsa,ethernet : Should be a phandle to a valid Ethernet device node
+- dsa,mii-bus : Should be a phandle to a valid MDIO bus device node
+
+Optionnal properties:
+- interrupts : property with a value describing the switch
+ interrupt number (not supported by the driver)
+
+A DSA node can contain multiple switch chips which are therefore child nodes of
+the parent DSA node. The maximum number of allowed child nodes is 4
+(DSA_MAX_SWITCHES).
+Each of these switch child nodes should have the following required properties:
+
+- reg : Describes the switch address on the MII bus
+- #address-cells : Must be 1
+- #size-cells : Must be 0
+
+A switch may have multiple "port" children nodes
+
+Each port children node must have the following mandatory properties:
+- reg : Describes the port address in the switch
+- label : Describes the label associated with this port, special
+ labels are "cpu" to indicate a CPU port and "dsa" to
+ indicate an uplink/downlink port.
+
+Note that a port labelled "dsa" will imply checking for the uplink phandle
+described below.
+
+Optionnal property:
+- link : Should be a phandle to another switch's DSA port.
+ This property is only used when switches are being
+ chained/cascaded together.
+
+Example:
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <10>;
+ dsa,ethernet = <ðernet0>;
+ dsa,mii-bus = <&mii_bus0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16 0>; /* MDIO address 16, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+
+ switch0uplink: port@6 {
+ reg = <6>;
+ label = "dsa";
+ link = <&switch1uplink>;
+ };
+ };
+
+ switch@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <17 1>; /* MDIO address 17, switch 1 in tree */
+
+ switch1uplink: port@0 {
+ reg = <0>;
+ label = "dsa";
+ link = <&switch0uplink>;
+ };
+ };
+ };
/*
* net/dsa/dsa.c - Hardware switch handling
* Copyright (c) 2008-2009 Marvell Semiconductor
+ * Copyright (c) 2013 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/slab.h>
#include <linux/module.h>
#include <net/dsa.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
#include "dsa_priv.h"
char dsa_driver_version[] = "0.1";
return NULL;
}
+#ifdef CONFIG_OF
+static int dsa_of_setup_routing_table(struct dsa_platform_data *pd,
+ struct dsa_chip_data *cd,
+ int chip_index,
+ struct device_node *link)
+{
+ int ret;
+ const __be32 *reg;
+ int link_port_addr;
+ int link_sw_addr;
+ struct device_node *parent_sw;
+ int len;
+
+ parent_sw = of_get_parent(link);
+ if (!parent_sw)
+ return -EINVAL;
+
+ reg = of_get_property(parent_sw, "reg", &len);
+ if (!reg || (len != sizeof(*reg) * 2))
+ return -EINVAL;
+
+ link_sw_addr = be32_to_cpup(reg + 1);
+
+ if (link_sw_addr >= pd->nr_chips)
+ return -EINVAL;
+
+ /* First time routing table allocation */
+ if (!cd->rtable) {
+ cd->rtable = kmalloc(pd->nr_chips * sizeof(s8), GFP_KERNEL);
+ if (!cd->rtable)
+ return -ENOMEM;
+
+ /* default to no valid uplink/downlink */
+ memset(cd->rtable, -1, pd->nr_chips * sizeof(s8));
+ }
+
+ reg = of_get_property(link, "reg", NULL);
+ if (!reg) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ link_port_addr = be32_to_cpup(reg);
+
+ cd->rtable[link_sw_addr] = link_port_addr;
+
+ return 0;
+out:
+ kfree(cd->rtable);
+ return ret;
+}
+
+static int dsa_of_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *child, *mdio, *ethernet, *port, *link;
+ struct mii_bus *mdio_bus;
+ struct platform_device *ethernet_dev;
+ struct dsa_platform_data *pd;
+ struct dsa_chip_data *cd;
+ const char *port_name;
+ int chip_index, port_index;
+ const unsigned int *sw_addr, *port_reg;
+ int ret, i;
+
+ mdio = of_parse_phandle(np, "dsa,mii-bus", 0);
+ if (!mdio)
+ return -EINVAL;
+
+ mdio_bus = of_mdio_find_bus(mdio);
+ if (!mdio_bus)
+ return -EINVAL;
+
+ ethernet = of_parse_phandle(np, "dsa,ethernet", 0);
+ if (!ethernet)
+ return -EINVAL;
+
+ ethernet_dev = of_find_device_by_node(ethernet);
+ if (!ethernet_dev)
+ return -ENODEV;
+
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ pdev->dev.platform_data = pd;
+ pd->netdev = ðernet_dev->dev;
+ pd->nr_chips = of_get_child_count(np);
+ if (pd->nr_chips > DSA_MAX_SWITCHES)
+ pd->nr_chips = DSA_MAX_SWITCHES;
+
+ pd->chip = kzalloc(pd->nr_chips * sizeof(struct dsa_chip_data),
+ GFP_KERNEL);
+ if (!pd->chip) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ chip_index = 0;
+ for_each_available_child_of_node(np, child) {
+ cd = &pd->chip[chip_index];
+
+ cd->mii_bus = &mdio_bus->dev;
+
+ sw_addr = of_get_property(child, "reg", NULL);
+ if (!sw_addr)
+ continue;
+
+ cd->sw_addr = be32_to_cpup(sw_addr);
+ if (cd->sw_addr > PHY_MAX_ADDR)
+ continue;
+
+ for_each_available_child_of_node(child, port) {
+ port_reg = of_get_property(port, "reg", NULL);
+ if (!port_reg)
+ continue;
+
+ port_index = be32_to_cpup(port_reg);
+
+ port_name = of_get_property(port, "label", NULL);
+ if (!port_name)
+ continue;
+
+ cd->port_names[port_index] = kstrdup(port_name,
+ GFP_KERNEL);
+ if (!cd->port_names[port_index]) {
+ ret = -ENOMEM;
+ goto out_free_chip;
+ }
+
+ link = of_parse_phandle(port, "link", 0);
+
+ if (!strcmp(port_name, "dsa") && link &&
+ pd->nr_chips > 1) {
+ ret = dsa_of_setup_routing_table(pd, cd,
+ chip_index, link);
+ if (ret)
+ goto out_free_chip;
+ }
+
+ if (port_index == DSA_MAX_PORTS)
+ break;
+ }
+ }
+
+ return 0;
+
+out_free_chip:
+ for (i = 0; i < pd->nr_chips; i++) {
+ port_index = 0;
+ while (pd->chip[i].port_names &&
+ pd->chip[i].port_names[++port_index])
+ kfree(pd->chip[i].port_names[port_index]);
+ kfree(pd->chip[i].rtable);
+ }
+ kfree(pd->chip);
+out_free:
+ kfree(pd);
+ pdev->dev.platform_data = NULL;
+ return ret;
+}
+
+static void dsa_of_remove(struct platform_device *pdev)
+{
+ struct dsa_platform_data *pd = pdev->dev.platform_data;
+ int i;
+ int port_index;
+
+ if (!pdev->dev.of_node)
+ return;
+
+ for (i = 0; i < pd->nr_chips; i++) {
+ port_index = 0;
+ while (pd->chip[i].port_names &&
+ pd->chip[i].port_names[++port_index])
+ kfree(pd->chip[i].port_names[port_index]);
+ kfree(pd->chip[i].rtable);
+ }
+
+ kfree(pd->chip);
+ kfree(pd);
+}
+#else
+static inline int dsa_of_probe(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static inline void dsa_of_remove(struct platform_device *pdev)
+{
+}
+#endif
+
static int dsa_probe(struct platform_device *pdev)
{
static int dsa_version_printed;
struct dsa_platform_data *pd = pdev->dev.platform_data;
struct net_device *dev;
struct dsa_switch_tree *dst;
- int i;
+ int i, ret;
if (!dsa_version_printed++)
printk(KERN_NOTICE "Distributed Switch Architecture "
"driver version %s\n", dsa_driver_version);
+ if (pdev->dev.of_node) {
+ ret = dsa_of_probe(pdev);
+ if (ret)
+ return ret;
+
+ pd = pdev->dev.platform_data;
+ }
+
if (pd == NULL || pd->netdev == NULL)
return -EINVAL;
dev = dev_to_net_device(pd->netdev);
- if (dev == NULL)
- return -EINVAL;
+ if (dev == NULL) {
+ ret = -EINVAL;
+ goto out;
+ }
if (dev->dsa_ptr != NULL) {
dev_put(dev);
- return -EEXIST;
+ ret = -EEXIST;
+ goto out;
}
dst = kzalloc(sizeof(*dst), GFP_KERNEL);
if (dst == NULL) {
dev_put(dev);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out;
}
platform_set_drvdata(pdev, dst);
}
return 0;
+
+out:
+ dsa_of_remove(pdev);
+
+ return ret;
}
static int dsa_remove(struct platform_device *pdev)
dsa_switch_destroy(ds);
}
+ dsa_of_remove(pdev);
+
return 0;
}
{
}
+static const struct of_device_id dsa_of_match_table[] = {
+ { .compatible = "marvell,dsa", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, dsa_of_match_table);
+
static struct platform_driver dsa_driver = {
.probe = dsa_probe,
.remove = dsa_remove,
.driver = {
.name = "dsa",
.owner = THIS_MODULE,
+ .of_match_table = dsa_of_match_table,
},
};
projects / linux-2.6-microblaze.git / commitdiff