net: stmmac: fix dwmac4 transmit performance regression

dwmac4's transmit performance dropped by a factor of four due to an
incorrect assumption about which definitions are for what. This
highlights the need for sane register macros.

Commit 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT
definitions") changed the way the txpbl value is merged into the
register:

        value = readl(ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan));
-       value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+       value = value | FIELD_PREP(DMA_BUS_MODE_PBL, txpbl);

With the following in the header file:

 #define DMA_BUS_MODE_PBL               BIT(16)
-#define DMA_BUS_MODE_PBL_SHIFT         16

The assumption here was that DMA_BUS_MODE_PBL was the mask for
DMA_BUS_MODE_PBL_SHIFT, but this turns out not to be the case.

The field is actually six bits wide, buts 21:16, and is called
TXPBL.

What's even more confusing is, there turns out to be a PBLX8
single bit in the DMA_CHAN_CONTROL register (0x1100 for channel 0),
and DMA_BUS_MODE_PBL seems to be used for that. However, this bit
et.al. was listed under a comment "/* DMA SYS Bus Mode bitmap */"
which is for register 0x1004.

Fix this up by adding an appropriately named field definition under
the DMA_CHAN_TX_CONTROL() register address definition.

Move the RPBL mask definition under DMA_CHAN_RX_CONTROL(), correctly
renaming it as well.

Also move the PBL bit definition under DMA_CHAN_CONTROL(), correctly
renaming it.

This removes confusion over the PBL fields.

Fixes: 8409495bf6c9 ("net: stmmac: cores: remove many xxx_SHIFT definitions")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Bisected-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/51859704-57fd-4913-b09d-9ac58a57f185@bootlin.com
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vgY1k-00000003vOC-0Z1H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 7036bec..aaa83e9 100644 (file)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -52,7 +52,7 @@ static void dwmac4_dma_init_rx_chan(struct stmmac_priv *priv,
        u32 rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
 
        value = readl(ioaddr + DMA_CHAN_RX_CONTROL(dwmac4_addrs, chan));
-       value = value | FIELD_PREP(DMA_BUS_MODE_RPBL_MASK, rxpbl);
+       value = value | FIELD_PREP(DMA_CHAN_RX_CTRL_RXPBL_MASK, rxpbl);
        writel(value, ioaddr + DMA_CHAN_RX_CONTROL(dwmac4_addrs, chan));
 
        if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) && likely(dma_cfg->eame))
@@ -73,7 +73,7 @@ static void dwmac4_dma_init_tx_chan(struct stmmac_priv *priv,
        u32 txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
 
        value = readl(ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan));
-       value = value | FIELD_PREP(DMA_BUS_MODE_PBL, txpbl);
+       value = value | FIELD_PREP(DMA_CHAN_TX_CTRL_TXPBL_MASK, txpbl);
 
        /* Enable OSP to get best performance */
        value |= DMA_CONTROL_OSP;
@@ -98,7 +98,7 @@ static void dwmac4_dma_init_channel(struct stmmac_priv *priv,
        /* common channel control register config */
        value = readl(ioaddr + DMA_CHAN_CONTROL(dwmac4_addrs, chan));
        if (dma_cfg->pblx8)
-               value = value | DMA_BUS_MODE_PBL;
+               value = value | DMA_CHAN_CTRL_PBLX8;
        writel(value, ioaddr + DMA_CHAN_CONTROL(dwmac4_addrs, chan));
 
        /* Mask interrupts by writing to CSR7 */
@@ -116,7 +116,7 @@ static void dwmac410_dma_init_channel(struct stmmac_priv *priv,
        /* common channel control register config */
        value = readl(ioaddr + DMA_CHAN_CONTROL(dwmac4_addrs, chan));
        if (dma_cfg->pblx8)
-               value = value | DMA_BUS_MODE_PBL;
+               value = value | DMA_CHAN_CTRL_PBLX8;
 
        writel(value, ioaddr + DMA_CHAN_CONTROL(dwmac4_addrs, chan));
 

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 5f1e291..9d9077a 100644 (file)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -24,8 +24,6 @@
 
 #define DMA_SYS_BUS_MODE               0x00001004
 
-#define DMA_BUS_MODE_PBL               BIT(16)
-#define DMA_BUS_MODE_RPBL_MASK         GENMASK(21, 16)
 #define DMA_BUS_MODE_MB                        BIT(14)
 #define DMA_BUS_MODE_FB                        BIT(0)
 
@@ -68,19 +66,22 @@ static inline u32 dma_chanx_base_addr(const struct dwmac4_addrs *addrs,
 
 #define DMA_CHAN_CONTROL(addrs, x)     dma_chanx_base_addr(addrs, x)
 
+#define DMA_CHAN_CTRL_PBLX8            BIT(16)
 #define DMA_CONTROL_SPH                        BIT(24)
 
 #define DMA_CHAN_TX_CONTROL(addrs, x)  (dma_chanx_base_addr(addrs, x) + 0x4)
 
 #define DMA_CONTROL_EDSE               BIT(28)
+#define DMA_CHAN_TX_CTRL_TXPBL_MASK    GENMASK(21, 16)
 #define DMA_CONTROL_TSE                        BIT(12)
 #define DMA_CONTROL_OSP                        BIT(4)
 #define DMA_CONTROL_ST                 BIT(0)
 
 #define DMA_CHAN_RX_CONTROL(addrs, x)  (dma_chanx_base_addr(addrs, x) + 0x8)
 
-#define DMA_CONTROL_SR                 BIT(0)
+#define DMA_CHAN_RX_CTRL_RXPBL_MASK    GENMASK(21, 16)
 #define DMA_RBSZ_MASK                  GENMASK(14, 1)
+#define DMA_CONTROL_SR                 BIT(0)
 
 #define DMA_CHAN_TX_BASE_ADDR_HI(addrs, x)     (dma_chanx_base_addr(addrs, x) + 0x10)
 #define DMA_CHAN_TX_BASE_ADDR(addrs, x)        (dma_chanx_base_addr(addrs, x) + 0x14)