ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT

Move the i2c0 controller properties to the SOM .dtsi. This is
preparation for adding an i2c device at the SOM level.

Cc: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 0d81600..a6edea6 100644 (file)
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -111,11 +111,6 @@
 };
 
 &i2c0 {
-       clock-frequency = <400000>;
-       pinctrl-0 = <&i2c0_pins>;
-       pinctrl-names = "default";
-       status = "okay";
-
        /*
         * PCA9655 GPIO expander, up to 1MHz clock.
         *  0-CON3 CLKREQ#

diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index 705adfa..fb49df2 100644 (file)
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -140,11 +140,6 @@
        soc {
                internal-regs {
                        i2c@11000 {
-                               clock-frequency = <400000>;
-                               pinctrl-0 = <&i2c0_pins>;
-                               pinctrl-names = "default";
-                               status = "okay";
-
                                /*
                                 * PCA9655 GPIO expander, up to 1MHz clock.
                                 *  0-Board Revision bit 0 #

diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 3a7f9c1..cd39312 100644 (file)
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -71,6 +71,13 @@
        };
 };
 
+&i2c0 {
+       clock-frequency = <400000>;
+       pinctrl-0 = <&i2c0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
 &pinctrl {
        microsom_phy_clk_pins: microsom-phy-clk-pins {
                marvell,pins = "mpp45";