dt-bindings: ata: Drop unneeded quotes

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230327170053.4100949-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
index 94d72ae..7fdf409 100644 (file)
--- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -59,7 +59,7 @@ properties:
     const: sata-phy
 
   hba-cap:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Bitfield of the HBA generic platform capabilities like Staggered
       Spin-up or Mechanical Presence Switch support. It can be used to
@@ -67,7 +67,7 @@ properties:
       in case if the system firmware hasn't done it.
 
   ports-implemented:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Mask that indicates which ports the HBA supports. Useful if PI is not
       programmed by the BIOS, which is true for some embedded SoC's.
@@ -110,7 +110,7 @@ $defs:
         description: Power regulator for SATA port target device
 
       hba-port-cap:
-        $ref: '/schemas/types.yaml#/definitions/uint32'
+        $ref: /schemas/types.yaml#/definitions/uint32
         description:
           Bitfield of the HBA port-specific platform capabilities like Hot
           plugging, eSATA, FIS-based Switching, etc (see AHCI specification

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
index 7dc2a2e..6d9e332 100644 (file)
--- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -34,7 +34,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "ahci-common.yaml#"
+  - $ref: ahci-common.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index c4e4a9e..fe09095 100644 (file)
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car Serial-ATA Interface