can: isotp: Explain PDU in CAN_ISOTP help text

The help text for the CAN_ISOTP config symbol uses the acronym "PDU".  However,
this acronym is not explained here, nor in Documentation/networking/can.rst.

Expand the acronym to make it easier for users to decide if they need to enable
the CAN_ISOTP option or not.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201013141341.28487-1-geert+renesas@glider.be
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/net/can/Kconfig b/net/can/Kconfig
index 224e5e0..7c9958d 100644 (file)
--- a/net/can/Kconfig
+++ b/net/can/Kconfig
@@ -62,8 +62,9 @@ config CAN_ISOTP
          communication between CAN nodes via two defined CAN Identifiers.
          As CAN frames can only transport a small amount of data bytes
          (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this
-         segmentation is needed to transport longer PDUs as needed e.g. for
-         vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic.
+         segmentation is needed to transport longer Protocol Data Units (PDU)
+         as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN
+         traffic.
          This protocol driver implements data transfers according to
          ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types.
          If you want to perform automotive vehicle diagnostic services (UDS),