unsigned long spitz_get_hsync_len(void)
{
+#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
+#endif
return 0;
return pxafb_get_hsync_time(spitz_pxafb_dev);
select ACPI
select NUMA
select ACPI_NUMA
- select VIRTUAL_MEM_MAP
- select DISCONTIGMEM
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
default "6" if ITANIUM
# align cache-sensitive data to 64 bytes
-config NUMA
- bool "NUMA support"
- depends on !IA64_HP_SIM
- default y if IA64_SGI_SN2
- select ACPI_NUMA
- help
- Say Y to compile the kernel to support NUMA (Non-Uniform Memory
- Access). This option is for configuring high-end multiprocessor
- server systems. If in doubt, say N.
-
-config VIRTUAL_MEM_MAP
- bool "Virtual mem map"
- default y if !IA64_HP_SIM
- help
- Say Y to compile the kernel with support for a virtual mem map.
- This code also only takes effect if a memory hole of greater than
- 1 Gb is found during boot. You must turn this option on if you
- require the DISCONTIGMEM option for your machine. If you are
- unsure, say Y.
-
-config HOLES_IN_ZONE
- bool
- default y if VIRTUAL_MEM_MAP
-
-config ARCH_DISCONTIGMEM_ENABLE
- bool "Discontiguous memory support"
- depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
- default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
- help
- Say Y to support efficient handling of discontiguous physical memory,
- for architectures which are either NUMA (Non-Uniform Memory Access)
- or have huge holes in the physical address space for other reasons.
- See <file:Documentation/vm/numa> for more.
-
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
based on a network adapter and DMA messaging.
config FORCE_MAX_ZONEORDER
- int
- default "18"
+ int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
+ range 11 17 if !HUGETLB_PAGE
+ default "17" if HUGETLB_PAGE
+ default "11"
config SMP
bool "Symmetric multi-processing support"
If you don't know what to do here, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-512)"
- range 2 512
+ int "Maximum number of CPUs (2-1024)"
+ range 2 1024
depends on SMP
default "64"
help
source "mm/Kconfig"
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ help
+ Say Y to support efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config NUMA
+ bool "NUMA support"
+ depends on !IA64_HP_SIM && !FLATMEM
+ default y if IA64_SGI_SN2
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option is for configuring high-end multiprocessor
+ server systems. If in doubt, say N.
+
+# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
+# VIRTUAL_MEM_MAP has been retained for historical reasons.
+config VIRTUAL_MEM_MAP
+ bool "Virtual mem map"
+ depends on !SPARSEMEM
+ default y if !IA64_HP_SIM
+ help
+ Say Y to compile the kernel with support for a virtual mem map.
+ This code also only takes effect if a memory hole of greater than
+ 1 Gb is found during boot. You must turn this option on if you
+ require the DISCONTIGMEM option for your machine. If you are
+ unsure, say Y.
+
+config HOLES_IN_ZONE
+ bool
+ default y if VIRTUAL_MEM_MAP
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
help
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 29 13:27:48 2004
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:18:49 2005
#
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
CONFIG_ITANIUM=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
# CONFIG_NUMA is not set
# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=m
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=m
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
-CONFIG_DRM=y
+CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_PCA_ISA is not set
#
-# Hardware Sensors Chip support
+# Miscellaneous I2C Chip support
#
-# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
+# Misc devices
#
-# CONFIG_W1 is not set
#
-# Misc devices
+# Multimedia Capabilities Port drivers
#
#
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS4281=m
# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_BLUETOOTH_TTY=m
-CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Sep 28 08:27:29 2005
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_GENERIC=y
+# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_IA64_L1_CACHE_SHIFT=7
+CONFIG_IA64_CYCLONE=y
+CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
+CONFIG_FORCE_MAX_ZONEORDER=17
+CONFIG_SMP=y
+CONFIG_NR_CPUS=512
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_IA64_MCA_RECOVERY=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+
+#
+# Firmware Drivers
+#
+CONFIG_EFI_VARS=y
+CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management and ACPI
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_BUTTON=m
+CONFIG_ACPI_FAN=m
+CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA)
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=m
+# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SGIIOC4=y
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+CONFIG_SCSI_SATA_VITESSE=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_FM801 is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SGI_SNSC=y
+CONFIG_SGI_TIOCX=y
+CONFIG_SGI_MBCS=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=m
+CONFIG_AGP_I460=m
+CONFIG_AGP_HP_ZX1=m
+CONFIG_AGP_SGI_TIOCA=m
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_HPET=y
+# CONFIG_HPET_RTC_IRQ is not set
+CONFIG_HPET_MMAP=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_MMTIMER=y
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS4281=m
+CONFIG_SND_EMU10K1=m
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=m
+# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_MTHCA=m
+# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+
+#
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6-tiger-smp
-# Wed Aug 17 10:19:51 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:17:57 2005
#
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
-# CONFIG_ACPI_HOTPLUG_CPU is not set
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA)
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
#
# SCTP Configuration (EXPERIMENTAL)
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# I2C support
#
# CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
#
# Dallas's 1-wire bus
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Wed Aug 17 10:02:43 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:15:01 2005
#
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
#
# SCTP Configuration (EXPERIMENTAL)
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
CONFIG_AGP_HP_ZX1=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
-# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
#
# USB Input Devices
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Profiling support
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 21 11:30:42 2005
+# Linux kernel version: 2.6.14-rc1
+# Wed Sep 14 15:13:03 2005
#
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_NUMA=y
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
+# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
-CONFIG_ACPI=y
+# CONFIG_PM_DEBUG is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
+CONFIG_ACPI=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
+CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SGI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_PNPACPI=y
#
# Block devices
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLOGIC_1280_1040 is not set
CONFIG_SCSI_QLA2XXX=y
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
+# Network device support
#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
-CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_SGI_IOC4=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=20
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#include <asm/machvec.h>
/* swiotlb declarations & definitions: */
-extern void swiotlb_init_with_default_size (size_t size);
+extern int swiotlb_late_init_with_default_size (size_t size);
extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent;
extern ia64_mv_dma_free_coherent swiotlb_free_coherent;
extern ia64_mv_dma_map_single swiotlb_map_single;
hwsw_init (void)
{
/* default to a smallish 2MB sw I/O TLB */
- swiotlb_init_with_default_size (2 * (1<<20));
+ if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) {
+#ifdef CONFIG_IA64_GENERIC
+ /* Better to have normal DMA than panic */
+ printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
+ " reverting to hpzx1 platform vector\n", __FUNCTION__);
+ machvec_init("hpzx1");
+#else
+ panic("Unable to initialize software I/O TLB services");
+#endif
+ }
}
void *
static int __init
sba_init(void)
{
+ if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb"))
+ return 0;
+
acpi_bus_register_driver(&acpi_sba_ioc_driver);
- if (!ioc_list)
+ if (!ioc_list) {
+#ifdef CONFIG_IA64_GENERIC
+ extern int swiotlb_late_init_with_default_size (size_t size);
+
+ /*
+ * If we didn't find something sba_iommu can claim, we
+ * need to setup the swiotlb and switch to the dig machvec.
+ */
+ if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0)
+ panic("Unable to find SBA IOMMU or initialize "
+ "software I/O TLB: Try machvec=dig boot option");
+ machvec_init("dig");
+#else
+ panic("Unable to find SBA IOMMU: Try a generic or DIG kernel");
+#endif
return 0;
+ }
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB)
+ /*
+ * hpzx1_swiotlb needs to have a fairly small swiotlb bounce
+ * buffer setup to support devices with smaller DMA masks than
+ * sba_iommu can handle.
+ */
+ if (ia64_platform_is("hpzx1_swiotlb")) {
+ extern void hwsw_init(void);
+
+ hwsw_init();
+ }
+#endif
#ifdef CONFIG_PCI
{
subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */
-extern void dig_setup(char**);
-/*
- * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good,
- * so we use the platform_setup hook to fix it up.
- */
-void __init
-sba_setup(char **cmdline_p)
-{
- MAX_DMA_ADDRESS = ~0UL;
- dig_setup(cmdline_p);
-}
-
static int __init
nosbagart(char *str)
{
char buf[512];
/*
- * This is a bit kludgey: the simulator doesn't provide a direct way of determining
- * the disk size, so we do a binary search, assuming a maximum disk size of 4GB.
+ * This is a bit kludgey: the simulator doesn't provide a
+ * direct way of determining the disk size, so we do a binary
+ * search, assuming a maximum disk size of 128GB.
*/
- for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) {
+ for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) {
req.addr = __pa(&buf);
req.len = sizeof(buf);
ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ);
{
unsigned long offset;
- offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16)
- | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512;
+ offset = (((unsigned long)sc->cmnd[2] << 24)
+ | ((unsigned long)sc->cmnd[3] << 16)
+ | ((unsigned long)sc->cmnd[4] << 8)
+ | ((unsigned long)sc->cmnd[5] << 0))*512UL;
if (sc->use_sg > 0)
simscsi_sg_readwrite(sc, mode, offset);
else
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
#ifdef CONFIG_ACPI_NUMA
-acpi_status __devinit
+static acpi_status __devinit
acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
map_iosapic_to_node(gsi_base, node);
return AE_OK;
}
-#endif /* CONFIG_NUMA */
+
+static int __init
+acpi_map_iosapics (void)
+{
+ acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
+ return 0;
+}
+
+fs_initcall(acpi_map_iosapics);
+#endif /* CONFIG_ACPI_NUMA */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
return 0;
}
-/*
- * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers
- * memory that is normally available to the kernel, issue a warning that some memory
- * is being ignored.
- */
-static void
-trim_bottom (efi_memory_desc_t *md, u64 start_addr)
-{
- u64 num_skipped_pages;
+typedef struct kern_memdesc {
+ u64 attribute;
+ u64 start;
+ u64 num_pages;
+} kern_memdesc_t;
- if (md->phys_addr >= start_addr || !md->num_pages)
- return;
-
- num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- if (num_skipped_pages > md->num_pages)
- num_skipped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_skipped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, start_addr - IA64_GRANULE_SIZE);
- /*
- * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory
- * descriptor list to become unsorted. In such a case, md->num_pages will be
- * zero, so the Right Thing will happen.
- */
- md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT;
- md->num_pages -= num_skipped_pages;
-}
+static kern_memdesc_t *kern_memmap;
static void
-trim_top (efi_memory_desc_t *md, u64 end_addr)
+walk (efi_freemem_callback_t callback, void *arg, u64 attr)
{
- u64 num_dropped_pages, md_end_addr;
-
- md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md_end_addr <= end_addr || !md->num_pages)
- return;
+ kern_memdesc_t *k;
+ u64 start, end, voff;
- num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT;
- if (num_dropped_pages > md->num_pages)
- num_dropped_pages = md->num_pages;
-
- if (is_available_memory(md))
- printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole "
- "at 0x%lx\n", __FUNCTION__,
- (num_dropped_pages << EFI_PAGE_SHIFT) >> 10,
- md->phys_addr, end_addr);
- md->num_pages -= num_dropped_pages;
+ voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET;
+ for (k = kern_memmap; k->start != ~0UL; k++) {
+ if (k->attribute != attr)
+ continue;
+ start = PAGE_ALIGN(k->start);
+ end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK;
+ if (start < end)
+ if ((*callback)(start + voff, end + voff, arg) < 0)
+ return;
+ }
}
/*
void
efi_memmap_walk (efi_freemem_callback_t callback, void *arg)
{
- int prev_valid = 0;
- struct range {
- u64 start;
- u64 end;
- } prev, curr;
- void *efi_map_start, *efi_map_end, *p, *q;
- efi_memory_desc_t *md, *check_md;
- u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0;
- unsigned long total_mem = 0;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
-
- /* skip over non-WB memory descriptors; that's all we're interested in... */
- if (!(md->attribute & EFI_MEMORY_WB))
- continue;
-
- /*
- * granule_addr is the base of md's first granule.
- * [granule_addr - first_non_wb_addr) is guaranteed to
- * be contiguous WB memory.
- */
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
-
- if (first_non_wb_addr < md->phys_addr) {
- trim_bottom(md, granule_addr + IA64_GRANULE_SIZE);
- granule_addr = GRANULEROUNDDOWN(md->phys_addr);
- first_non_wb_addr = max(first_non_wb_addr, granule_addr);
- }
-
- for (q = p; q < efi_map_end; q += efi_desc_size) {
- check_md = q;
-
- if ((check_md->attribute & EFI_MEMORY_WB) &&
- (check_md->phys_addr == first_non_wb_addr))
- first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT;
- else
- break; /* non-WB or hole */
- }
-
- last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr);
- if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT))
- trim_top(md, last_granule_addr);
-
- if (is_available_memory(md)) {
- if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) {
- if (md->phys_addr >= max_addr)
- continue;
- md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr;
- }
-
- if (total_mem >= mem_limit)
- continue;
-
- if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) {
- unsigned long limit_addr = md->phys_addr;
-
- limit_addr += mem_limit - total_mem;
- limit_addr = GRANULEROUNDDOWN(limit_addr);
-
- if (md->phys_addr > limit_addr)
- continue;
-
- md->num_pages = (limit_addr - md->phys_addr) >>
- EFI_PAGE_SHIFT;
- first_non_wb_addr = max_addr = md->phys_addr +
- (md->num_pages << EFI_PAGE_SHIFT);
- }
- total_mem += (md->num_pages << EFI_PAGE_SHIFT);
-
- if (md->num_pages == 0)
- continue;
-
- curr.start = PAGE_OFFSET + md->phys_addr;
- curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT);
-
- if (!prev_valid) {
- prev = curr;
- prev_valid = 1;
- } else {
- if (curr.start < prev.start)
- printk(KERN_ERR "Oops: EFI memory table not ordered!\n");
-
- if (prev.end == curr.start) {
- /* merge two consecutive memory ranges */
- prev.end = curr.end;
- } else {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if ((end > start) && (*callback)(start, end, arg) < 0)
- return;
- prev = curr;
- }
- }
- }
- }
- if (prev_valid) {
- start = PAGE_ALIGN(prev.start);
- end = prev.end & PAGE_MASK;
- if (end > start)
- (*callback)(start, end, arg);
- }
+ walk(callback, arg, EFI_MEMORY_WB);
}
/*
- * Walk the EFI memory map to pull out leftover pages in the lower
- * memory regions which do not end up in the regular memory map and
- * stick them into the uncached allocator
- *
- * The regular walk function is significantly more complex than the
- * uncached walk which means it really doesn't make sense to try and
- * marge the two.
+ * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that
+ * has memory that is available for uncached allocator.
*/
-void __init
-efi_memmap_walk_uc (efi_freemem_callback_t callback)
+void
+efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg)
{
- void *efi_map_start, *efi_map_end, *p;
- efi_memory_desc_t *md;
- u64 efi_desc_size, start, end;
-
- efi_map_start = __va(ia64_boot_param->efi_memmap);
- efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
- efi_desc_size = ia64_boot_param->efi_memdesc_size;
-
- for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
- md = p;
- if (md->attribute == EFI_MEMORY_UC) {
- start = PAGE_ALIGN(md->phys_addr);
- end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK);
- if ((*callback)(start, end, NULL) < 0)
- return;
- }
- }
+ walk(callback, arg, EFI_MEMORY_UC);
}
-
/*
* Look for the PAL_CODE region reported by EFI and maps it using an
* ITR to enable safe PAL calls in virtual mode. See IA-64 Processor
printk(KERN_ERR "Malformed %s value\n", name);
return 0;
}
+
+#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT)
+
+static inline u64
+kmd_end(kern_memdesc_t *kmd)
+{
+ return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT));
+}
+
+static inline u64
+efi_md_end(efi_memory_desc_t *md)
+{
+ return (md->phys_addr + efi_md_size(md));
+}
+
+static inline int
+efi_wb(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_WB);
+}
+
+static inline int
+efi_uc(efi_memory_desc_t *md)
+{
+ return (md->attribute & EFI_MEMORY_UC);
+}
+
+/*
+ * Look for the first granule aligned memory descriptor memory
+ * that is big enough to hold EFI memory map. Make sure this
+ * descriptor is atleast granule sized so it does not get trimmed
+ */
+struct kern_memdesc *
+find_memmap_space (void)
+{
+ u64 contig_low=0, contig_high=0;
+ u64 as = 0, ae;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 space_needed, efi_desc_size;
+ unsigned long total_mem = 0;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ /*
+ * Worst case: we need 3 kernel descriptors for each efi descriptor
+ * (if every entry has a WB part in the middle, and UC head and tail),
+ * plus one for the end marker.
+ */
+ space_needed = sizeof(kern_memdesc_t) *
+ (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1);
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md) || md->type == EFI_LOADER_DATA)
+ continue;
+
+ /* Round ends inward to granule boundaries */
+ as = max(contig_low, md->phys_addr);
+ ae = min(contig_high, efi_md_end(md));
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+
+ if (ae - as > space_needed)
+ break;
+ }
+ if (p >= efi_map_end)
+ panic("Can't allocate space for kernel memory descriptors");
+
+ return __va(as);
+}
+
+/*
+ * Walk the EFI memory map and gather all memory available for kernel
+ * to use. We can allocate partial granules only if the unavailable
+ * parts exist, and are WB.
+ */
+void
+efi_memmap_init(unsigned long *s, unsigned long *e)
+{
+ struct kern_memdesc *k, *prev = 0;
+ u64 contig_low=0, contig_high=0;
+ u64 as, ae, lim;
+ void *efi_map_start, *efi_map_end, *p, *q;
+ efi_memory_desc_t *md, *pmd = NULL, *check_md;
+ u64 efi_desc_size;
+ unsigned long total_mem = 0;
+
+ k = kern_memmap = find_memmap_space();
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) {
+ md = p;
+ if (!efi_wb(md)) {
+ if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY ||
+ md->type == EFI_BOOT_SERVICES_DATA)) {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = md->num_pages;
+ k++;
+ }
+ continue;
+ }
+ if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) {
+ contig_low = GRANULEROUNDUP(md->phys_addr);
+ contig_high = efi_md_end(md);
+ for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) {
+ check_md = q;
+ if (!efi_wb(check_md))
+ break;
+ if (contig_high != check_md->phys_addr)
+ break;
+ contig_high = efi_md_end(check_md);
+ }
+ contig_high = GRANULEROUNDDOWN(contig_high);
+ }
+ if (!is_available_memory(md))
+ continue;
+
+ /*
+ * Round ends inward to granule boundaries
+ * Give trimmings to uncached allocator
+ */
+ if (md->phys_addr < contig_low) {
+ lim = min(efi_md_end(md), contig_low);
+ if (efi_uc(md)) {
+ if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = md->phys_addr;
+ k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ as = contig_low;
+ } else
+ as = md->phys_addr;
+
+ if (efi_md_end(md) > contig_high) {
+ lim = max(md->phys_addr, contig_high);
+ if (efi_uc(md)) {
+ if (lim == md->phys_addr && k > kern_memmap &&
+ (k-1)->attribute == EFI_MEMORY_UC &&
+ kmd_end(k-1) == md->phys_addr) {
+ (k-1)->num_pages += md->num_pages;
+ } else {
+ k->attribute = EFI_MEMORY_UC;
+ k->start = lim;
+ k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT;
+ k++;
+ }
+ }
+ ae = contig_high;
+ } else
+ ae = efi_md_end(md);
+
+ /* keep within max_addr= command line arg */
+ ae = min(ae, max_addr);
+ if (ae <= as)
+ continue;
+
+ /* avoid going over mem= command line arg */
+ if (total_mem + (ae - as) > mem_limit)
+ ae -= total_mem + (ae - as) - mem_limit;
+
+ if (ae <= as)
+ continue;
+ if (prev && kmd_end(prev) == md->phys_addr) {
+ prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ continue;
+ }
+ k->attribute = EFI_MEMORY_WB;
+ k->start = as;
+ k->num_pages = (ae - as) >> EFI_PAGE_SHIFT;
+ total_mem += ae - as;
+ prev = k++;
+ }
+ k->start = ~0L; /* end-marker */
+
+ /* reserve the memory we are using for kern_memmap */
+ *s = (u64)kern_memmap;
+ *e = (u64)++k;
+}
+
+void
+efi_initialize_iomem_resources(struct resource *code_resource,
+ struct resource *data_resource)
+{
+ struct resource *res;
+ void *efi_map_start, *efi_map_end, *p;
+ efi_memory_desc_t *md;
+ u64 efi_desc_size;
+ char *name;
+ unsigned long flags;
+
+ efi_map_start = __va(ia64_boot_param->efi_memmap);
+ efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size;
+ efi_desc_size = ia64_boot_param->efi_memdesc_size;
+
+ res = NULL;
+
+ for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) {
+ md = p;
+
+ if (md->num_pages == 0) /* should not happen */
+ continue;
+
+ flags = IORESOURCE_MEM;
+ switch (md->type) {
+
+ case EFI_MEMORY_MAPPED_IO:
+ case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
+ continue;
+
+ case EFI_LOADER_CODE:
+ case EFI_LOADER_DATA:
+ case EFI_BOOT_SERVICES_DATA:
+ case EFI_BOOT_SERVICES_CODE:
+ case EFI_CONVENTIONAL_MEMORY:
+ if (md->attribute & EFI_MEMORY_WP) {
+ name = "System ROM";
+ flags |= IORESOURCE_READONLY;
+ } else {
+ name = "System RAM";
+ }
+ break;
+
+ case EFI_ACPI_MEMORY_NVS:
+ name = "ACPI Non-volatile Storage";
+ flags |= IORESOURCE_BUSY;
+ break;
+
+ case EFI_UNUSABLE_MEMORY:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+ break;
+
+ case EFI_RESERVED_TYPE:
+ case EFI_RUNTIME_SERVICES_CODE:
+ case EFI_RUNTIME_SERVICES_DATA:
+ case EFI_ACPI_RECLAIM_MEMORY:
+ default:
+ name = "reserved";
+ flags |= IORESOURCE_BUSY;
+ break;
+ }
+
+ if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) {
+ printk(KERN_ERR "failed to alocate resource for iomem\n");
+ return;
+ }
+
+ res->name = name;
+ res->start = md->phys_addr;
+ res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1;
+ res->flags = flags;
+
+ if (insert_resource(&iomem_resource, res) < 0)
+ kfree(res);
+ else {
+ /*
+ * We don't know which region contains
+ * kernel data so we try it repeatedly and
+ * let the resource manager test it.
+ */
+ insert_resource(res, code_resource);
+ insert_resource(res, data_resource);
+ }
+ }
+}
unsigned long vga_console_iobase;
unsigned long vga_console_membase;
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+extern void efi_initialize_iomem_resources(struct resource *,
+ struct resource *);
+extern char _text[], _end[], _etext[];
+
unsigned long ia64_max_cacheline_size;
unsigned long ia64_iobase; /* virtual address for I/O accesses */
EXPORT_SYMBOL(ia64_iobase);
}
}
+/*
+ * Request address space for all standard resources
+ */
+static int __init register_memory(void)
+{
+ code_resource.start = ia64_tpa(_text);
+ code_resource.end = ia64_tpa(_etext) - 1;
+ data_resource.start = ia64_tpa(_etext);
+ data_resource.end = ia64_tpa(_end) - 1;
+ efi_initialize_iomem_resources(&code_resource, &data_resource);
+
+ return 0;
+}
+
+__initcall(register_memory);
+
/**
* reserve_memory - setup reserved memory areas
*
}
#endif
+ efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end);
+ n++;
+
/* end of memory marker */
rsvd_region[n].start = ~0UL;
rsvd_region[n].end = ~0UL;
static void __init
io_port_init (void)
{
- extern unsigned long ia64_iobase;
unsigned long phys_iobase;
/*
- * Set `iobase' to the appropriate address in region 6 (uncached access range).
+ * Set `iobase' based on the EFI memory map or, failing that, the
+ * value firmware left in ar.k0.
*
- * The EFI memory map is the "preferred" location to get the I/O port space base,
- * rather the relying on AR.KR0. This should become more clear in future SAL
- * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is
- * found in the memory map.
+ * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute
+ * the port's virtual address, so ia32_load_state() loads it with a
+ * user virtual address. But in ia64 mode, glibc uses the
+ * *physical* address in ar.k0 to mmap the appropriate area from
+ * /dev/mem, and the inX()/outX() interfaces use MMIO. In both
+ * cases, user-mode can only use the legacy 0-64K I/O port space.
+ *
+ * ar.k0 is not involved in kernel I/O port accesses, which can use
+ * any of the I/O port spaces and are done via MMIO using the
+ * virtual mmio_base from the appropriate io_space[].
*/
phys_iobase = efi_get_iobase();
- if (phys_iobase)
- /* set AR.KR0 since this is all we use it for anyway */
- ia64_set_kr(IA64_KR_IO_BASE, phys_iobase);
- else {
+ if (!phys_iobase) {
phys_iobase = ia64_get_kr(IA64_KR_IO_BASE);
- printk(KERN_INFO "No I/O port range found in EFI memory map, falling back "
- "to AR.KR0\n");
- printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase);
+ printk(KERN_INFO "No I/O port range found in EFI memory map, "
+ "falling back to AR.KR0 (0x%lx)\n", phys_iobase);
}
ia64_iobase = (unsigned long) ioremap(phys_iobase, 0);
+ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
/* setup legacy IO port space */
io_space[0].mmio_base = ia64_iobase;
static int __init
uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
{
- long length;
- unsigned long vstart, vend;
+ long length = end - start;
int node;
- length = end - start;
- vstart = start + __IA64_UNCACHED_OFFSET;
- vend = end + __IA64_UNCACHED_OFFSET;
-
dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end);
- memset((char *)vstart, 0, length);
+ memset((char *)start, 0, length);
- node = paddr_to_nid(start);
+ node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET);
- for (; vstart < vend ; vstart += PAGE_SIZE) {
- dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);
- gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE);
+ for (; start < end ; start += PAGE_SIZE) {
+ dprintk(KERN_INFO "sticking %lx into the pool!\n", start);
+ gen_pool_free(uncached_pool[node], start, PAGE_SIZE);
}
return 0;
*/
#define IO_TLB_SHIFT 11
+#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT))
+
+/*
+ * Minimum IO TLB size to bother booting with. Systems with mainly
+ * 64bit capable cards will only lightly use the swiotlb. If we can't
+ * allocate a contiguous 1MB, we're probably in trouble anyway.
+ */
+#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT)
+
int swiotlb_force;
/*
swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
+/*
+ * Systems with larger DMA zones (those that don't support ISA) can
+ * initialize the swiotlb later using the slab allocator if needed.
+ * This should be just like above, but with some error catching.
+ */
+int
+swiotlb_late_init_with_default_size (size_t default_size)
+{
+ unsigned long i, req_nslabs = io_tlb_nslabs;
+ unsigned int order;
+
+ if (!io_tlb_nslabs) {
+ io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
+ io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
+ }
+
+ /*
+ * Get IO TLB memory from the low pages
+ */
+ order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+
+ while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
+ io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
+ order);
+ if (io_tlb_start)
+ break;
+ order--;
+ }
+
+ if (!io_tlb_start)
+ goto cleanup1;
+
+ if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+ printk(KERN_WARNING "Warning: only able to allocate %ld MB "
+ "for software IO TLB\n", (PAGE_SIZE << order) >> 20);
+ io_tlb_nslabs = SLABS_PER_PAGE << order;
+ }
+ io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+ memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+
+ /*
+ * Allocate and initialize the free list array. This array is used
+ * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
+ * between io_tlb_start and io_tlb_end.
+ */
+ io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(int)));
+ if (!io_tlb_list)
+ goto cleanup2;
+
+ for (i = 0; i < io_tlb_nslabs; i++)
+ io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
+ io_tlb_index = 0;
+
+ io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(char *)));
+ if (!io_tlb_orig_addr)
+ goto cleanup3;
+
+ memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
+
+ /*
+ * Get the overflow emergency buffer
+ */
+ io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA,
+ get_order(io_tlb_overflow));
+ if (!io_tlb_overflow_buffer)
+ goto cleanup4;
+
+ printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
+ "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
+ virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+
+ return 0;
+
+cleanup4:
+ free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
+ sizeof(char *)));
+ io_tlb_orig_addr = NULL;
+cleanup3:
+ free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
+ sizeof(int)));
+ io_tlb_list = NULL;
+ io_tlb_end = NULL;
+cleanup2:
+ free_pages((unsigned long)io_tlb_start, order);
+ io_tlb_start = NULL;
+cleanup1:
+ io_tlb_nslabs = req_nslabs;
+ return -ENOMEM;
+}
+
static inline int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_DISCONTIGMEM) += discontig.o
-ifndef CONFIG_DISCONTIGMEM
-obj-y += contig.o
-endif
+obj-$(CONFIG_SPARSEMEM) += discontig.o
+obj-$(CONFIG_FLATMEM) += contig.o
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
- free_area_init_node(0, &contig_page_data, zones_size, 0,
+ free_area_init_node(0, NODE_DATA(0), zones_size, 0,
zholes_size);
} else {
unsigned long map_size;
efi_memmap_walk(create_mem_map_page_table, NULL);
NODE_DATA(0)->node_mem_map = vmem_map;
- free_area_init_node(0, &contig_page_data, zones_size,
+ free_area_init_node(0, NODE_DATA(0), zones_size,
0, zholes_size);
printk("Virtual mem_map starts at 0x%p\n", mem_map);
return;
}
+#ifdef CONFIG_SPARSEMEM
+/**
+ * register_sparse_mem - notify SPARSEMEM that this memory range exists.
+ * @start: physical start of range
+ * @end: physical end of range
+ * @arg: unused
+ *
+ * Simply calls SPARSEMEM to register memory section(s).
+ */
+static int __init register_sparse_mem(unsigned long start, unsigned long end,
+ void *arg)
+{
+ int nid;
+
+ start = __pa(start) >> PAGE_SHIFT;
+ end = __pa(end) >> PAGE_SHIFT;
+ nid = early_pfn_to_nid(start);
+ memory_present(nid, start, end);
+
+ return 0;
+}
+
+static void __init arch_sparse_init(void)
+{
+ efi_memmap_walk(register_sparse_mem, NULL);
+ sparse_init();
+}
+#else
+#define arch_sparse_init() do {} while (0)
+#endif
+
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
int shared = 0, cached = 0, reserved = 0;
printk("Node ID: %d\n", pgdat->node_id);
for(i = 0; i < pgdat->node_spanned_pages; i++) {
- struct page *page = pgdat_page_nr(pgdat, i);
- if (!ia64_pfn_valid(pgdat->node_start_pfn+i))
+ struct page *page;
+ if (pfn_valid(pgdat->node_start_pfn + i))
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ else
continue;
if (PageReserved(page))
reserved++;
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+ arch_sparse_init();
+
efi_memmap_walk(filter_rsvd_memory, count_node_pages);
+#ifdef CONFIG_VIRTUAL_MEM_MAP
vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page));
vmem_map = (struct page *) vmalloc_end;
efi_memmap_walk(create_mem_map_page_table, NULL);
printk("Virtual mem_map starts at 0x%p\n", vmem_map);
+#endif
for_each_online_node(node) {
memset(zones_size, 0, sizeof(zones_size));
pfn_offset = mem_data[node].min_pfn;
+#ifdef CONFIG_VIRTUAL_MEM_MAP
NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset;
+#endif
free_area_init_node(node, NODE_DATA(node), zones_size,
pfn_offset, zholes_size);
}
platform_dma_init();
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
if (!mem_map)
BUG();
max_mapnr = max_low_pfn;
return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0);
}
+
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA)
+/*
+ * Because of holes evaluate on section limits.
+ * If the section of memory exists, then return the node where the section
+ * resides. Otherwise return node 0 as the default. This is used by
+ * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where
+ * the section resides.
+ */
+int early_pfn_to_nid(unsigned long pfn)
+{
+ int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec;
+
+ for (i = 0; i < num_node_memblks; i++) {
+ ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT;
+ esec = (node_memblk[i].start_paddr + node_memblk[i].size +
+ ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT;
+ if (section >= ssec && section < esec)
+ return node_memblk[i].nid;
+ }
+
+ return 0;
+}
+#endif
.write = pci_write,
};
-#ifdef CONFIG_NUMA
-extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **);
-static void acpi_map_iosapics(void)
-{
- acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL);
-}
-#else
-static void acpi_map_iosapics(void)
-{
- return;
-}
-#endif /* CONFIG_NUMA */
-
-static int __init
-pci_acpi_init (void)
-{
- acpi_map_iosapics();
-
- return 0;
-}
-
-subsys_initcall(pci_acpi_init);
-
/* Called by ACPI when it finds a new root bus. */
static struct pci_controller * __devinit
return IO_SPACE_BASE(i);
}
+static acpi_status __devinit resource_to_window(struct acpi_resource *resource,
+ struct acpi_resource_address64 *addr)
+{
+ acpi_status status;
+
+ /*
+ * We're only interested in _CRS descriptors that are
+ * - address space descriptors for memory or I/O space
+ * - non-zero size
+ * - producers, i.e., the address space is routed downstream,
+ * not consumed by the bridge itself
+ */
+ status = acpi_resource_to_address64(resource, addr);
+ if (ACPI_SUCCESS(status) &&
+ (addr->resource_type == ACPI_MEMORY_RANGE ||
+ addr->resource_type == ACPI_IO_RANGE) &&
+ addr->address_length &&
+ addr->producer_consumer == ACPI_PRODUCER)
+ return AE_OK;
+
+ return AE_ERROR;
+}
+
static acpi_status __devinit
count_window (struct acpi_resource *resource, void *data)
{
struct acpi_resource_address64 addr;
acpi_status status;
- status = acpi_resource_to_address64(resource, &addr);
+ status = resource_to_window(resource, &addr);
if (ACPI_SUCCESS(status))
- if (addr.resource_type == ACPI_MEMORY_RANGE ||
- addr.resource_type == ACPI_IO_RANGE)
- (*windows)++;
+ (*windows)++;
return AE_OK;
}
unsigned long flags, offset = 0;
struct resource *root;
- status = acpi_resource_to_address64(res, &addr);
+ /* Return AE_OK for non-window resources to keep scanning for more */
+ status = resource_to_window(res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
- if (!addr.address_length)
- return AE_OK;
-
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
root = &iomem_resource;
#include "xtalk/hubdev.h"
#include "xtalk/xwidgetdev.h"
-nasid_t master_nasid = INVALID_NASID; /* Partition Master */
-
static struct list_head sn_sysdata_list;
/* sysdata list struct */
* Get SGI Specific HUB chipset information.
* Inform Prom that this kernel can support domain bus numbering.
*/
- for (i = 0; i < numionodes; i++) {
+ for (i = 0; i < num_cnodes; i++) {
hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
-lboard_t *root_lboard[MAX_COMPACT_NODES];
-
extern void bte_init_node(nodepda_t *, cnodeid_t);
extern void sn_timer_init(void);
EXPORT_SYMBOL(sn_region_size);
int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-short physical_node_map[MAX_PHYSNODE_ID];
+short physical_node_map[MAX_NUMALINK_NODES];
static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
EXPORT_SYMBOL(physical_node_map);
-int numionodes;
+int num_cnodes;
static void sn_init_pdas(char **);
-static void scan_for_ionodes(void);
+static void build_cnode_tables(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
char drive_info[4 * 16];
#endif
-/*
- * Get nasid of current cpu early in boot before nodepda is initialized
- */
-static int
-boot_get_nasid(void)
-{
- int nasid;
-
- if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
- BUG();
- return nasid;
-}
-
/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
}
extern int platform_intr_list[];
-extern nasid_t master_nasid;
static int __initdata shub_1_1_found = 0;
/*
void __init sn_setup(char **cmdline_p)
{
long status, ticks_per_sec, drift;
- int pxm;
u32 version = sn_sal_rev();
extern void sn_cpu_init(void);
MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
- memset(physical_node_map, -1, sizeof(physical_node_map));
- for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
- if (pxm_to_nid_map[pxm] != -1)
- physical_node_map[pxm_to_nasid(pxm)] =
- pxm_to_nid_map[pxm];
+ /*
+ * Build the tables for managing cnodes.
+ */
+ build_cnode_tables();
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
- master_nasid = boot_get_nasid();
-
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
{
cnodeid_t cnode;
- memset(sn_cnodeid_to_nasid, -1,
- sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- for_each_online_node(cnode)
- sn_cnodeid_to_nasid[cnode] =
- pxm_to_nasid(nid_to_pxm_map[cnode]);
-
- numionodes = num_online_nodes();
- scan_for_ionodes();
-
/*
* Allocate & initalize the nodepda for each node.
*/
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
/*
* Now copy the array of nodepda pointers to each nodepda.
*/
- for (cnode = 0; cnode < numionodes; cnode++)
+ for (cnode = 0; cnode < num_cnodes; cnode++)
memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
sizeof(nodepdaindr));
* Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
- for (cnode = 0; cnode < numionodes; cnode++) {
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
hubdev_init_node(nodepdaindr[cnode], cnode);
}
}
}
/*
- * Scan klconfig for ionodes. Add the nasids to the
- * physical_node_map and the pda and increment numionodes.
+ * Build tables for converting between NASIDs and cnodes.
*/
+static inline int __init board_needs_cnode(int type)
+{
+ return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
+}
-static void __init scan_for_ionodes(void)
+void __init build_cnode_tables(void)
{
- int nasid = 0;
+ int nasid;
+ int node;
lboard_t *brd;
- /* fakeprom does not support klgraph */
- if (IS_RUNNING_ON_FAKE_PROM())
- return;
-
- /* Setup ionodes with memory */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- char *klgraph_header;
- cnodeid_t cnodeid;
-
- if (physical_node_map[nasid] == -1)
- continue;
+ memset(physical_node_map, -1, sizeof(physical_node_map));
+ memset(sn_cnodeid_to_nasid, -1,
+ sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- cnodeid = -1;
- klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
- if (!klgraph_header) {
- BUG(); /* All nodes must have klconfig tables! */
- }
- cnodeid = nasid_to_cnodeid(nasid);
- root_lboard[cnodeid] = (lboard_t *)
- NODE_OFFSET_TO_LBOARD((nasid),
- ((kl_config_hdr_t
- *) (klgraph_header))->
- ch_board_info);
+ /*
+ * First populate the tables with C/M bricks. This ensures that
+ * cnode == node for all C & M bricks.
+ */
+ for_each_online_node(node) {
+ nasid = pxm_to_nasid(nid_to_pxm_map[node]);
+ sn_cnodeid_to_nasid[node] = nasid;
+ physical_node_map[nasid] = node;
}
- /* Scan headless/memless IO Nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_SNIA);
- if (brd) {
- brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
- if (!brd)
- continue;
- }
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
+ /*
+ * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
+ * limit on the number of nodes, we can't use the generic node numbers
+ * for this. Note that num_cnodes is incremented below as TIOs or
+ * headless/memoryless nodes are discovered.
+ */
+ num_cnodes = num_online_nodes();
- while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_SNIA);
- }
- }
+ /* fakeprom does not support klgraph */
+ if (IS_RUNNING_ON_FAKE_PROM())
+ return;
- /* Scan for TIO nodes. */
- for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
- /* if there's no nasid, don't try to read the klconfig on the node */
- if (physical_node_map[nasid] == -1)
- continue;
- brd = find_lboard_any((lboard_t *)
- root_lboard[nasid_to_cnodeid(nasid)],
- KLTYPE_TIO);
+ /* Find TIOs & headless/memoryless nodes and add them to the tables */
+ for_each_online_node(node) {
+ kl_config_hdr_t *klgraph_header;
+ nasid = cnodeid_to_nasid(node);
+ if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL)
+ BUG();
+ brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
while (brd) {
- sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = numionodes;
- root_lboard[numionodes] = brd;
- numionodes++;
- brd = KLCF_NEXT_ANY(brd);
- if (!brd)
- break;
-
- brd = find_lboard_any(brd, KLTYPE_TIO);
+ if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
+ sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
+ physical_node_map[brd->brd_nasid] = num_cnodes++;
+ }
+ brd = find_lboard_next(brd);
}
}
}
for_each_online_cpu(j) {
seq_printf(s, j ? ":%d" : ", dist %d",
node_distance(
- cpuid_to_cnodeid(i),
- cpuid_to_cnodeid(j)));
+ cpu_to_node(i),
+ cpu_to_node(j)));
}
seq_putc(s, '\n');
}
* @part_num: device's part number
* @mfg_num: device's manufacturer number
* @hubdev: hub info associated with this device
+ * @bt: board type of the device
*
*/
int
cx_device_register(nasid_t nasid, int part_num, int mfg_num,
- struct hubdev_info *hubdev)
+ struct hubdev_info *hubdev, int bt)
{
struct cx_dev *cx_dev;
cx_dev->cx_id.mfg_num = mfg_num;
cx_dev->cx_id.nasid = nasid;
cx_dev->hubdev = hubdev;
+ cx_dev->bt = bt;
cx_dev->dev.parent = NULL;
cx_dev->dev.bus = &tiocx_bus_type;
{
cx_device_unregister(cx_dev);
return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
- cx_dev->cx_id.mfg_num, cx_dev->hubdev);
+ cx_dev->cx_id.mfg_num, cx_dev->hubdev,
+ cx_dev->bt);
}
static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
udelay(2000);
}
-static int tiocx_btchar_get(int nasid)
+static int is_fpga_tio(int nasid, int *bt)
{
- moduleid_t module_id;
- geoid_t geoid;
- int cnodeid;
-
- cnodeid = nasid_to_cnodeid(nasid);
- geoid = cnodeid_get_geoid(cnodeid);
- module_id = geo_module(geoid);
- return MODULE_GET_BTCHAR(module_id);
-}
+ int ioboard_type;
-static int is_fpga_brick(int nasid)
-{
- switch (tiocx_btchar_get(nasid)) {
+ ioboard_type = ia64_sn_sysctl_ioboard_get(nasid);
+
+ switch (ioboard_type) {
case L1_BRICKTYPE_SA:
case L1_BRICKTYPE_ATHENA:
- case L1_BRICKTYPE_DAYTONA:
+ case L1_BOARDTYPE_DAYTONA:
+ *bt = ioboard_type;
return 1;
}
+
return 0;
}
if (bitstream_loaded(nasid)) {
uint64_t cx_id;
-
- cx_id =
- *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+ int rv;
+
+ rv = ia64_sn_sysctl_tio_clock_reset(nasid);
+ if (rv) {
+ printk(KERN_ALERT "CX port JTAG reset failed.\n");
+ } else {
+ cx_id = *(volatile uint64_t *)
+ (TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
- part_num = XWIDGET_PART_NUM(cx_id);
- mfg_num = XWIDGET_MFG_NUM(cx_id);
- DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
- /* just ignore it if it's a CE */
- if (part_num == TIO_CE_ASIC_PARTNUM)
- return 0;
+ part_num = XWIDGET_PART_NUM(cx_id);
+ mfg_num = XWIDGET_MFG_NUM(cx_id);
+ DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num);
+ /* just ignore it if it's a CE */
+ if (part_num == TIO_CE_ASIC_PARTNUM)
+ return 0;
+ }
}
cx_dev->cx_id.part_num = part_num;
{
struct cx_dev *cx_dev = to_cx_dev(dev);
- return sprintf(buf, "0x%x 0x%x 0x%x %d\n",
+ return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n",
cx_dev->cx_id.nasid,
cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num,
- tiocx_btchar_get(cx_dev->cx_id.nasid));
+ cx_dev->bt);
}
static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf,
bus_register(&tiocx_bus_type);
- for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) {
+ for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) {
nasid_t nasid;
+ int bt;
- if ((nasid = cnodeid_to_nasid(cnodeid)) < 0)
- break; /* No more nasids .. bail out of loop */
+ nasid = cnodeid_to_nasid(cnodeid);
- if ((nasid & 0x1) && is_fpga_brick(nasid)) {
+ if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) {
struct hubdev_info *hubdev;
struct xwidget_info *widgetp;
if (cx_device_register
(nasid, widgetp->xwi_hwid.part_num,
- widgetp->xwi_hwid.mfg_num, hubdev) < 0)
+ widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0)
return -ENXIO;
else
found_tiocx_device++;
/* original protection values for each node */
-u64 xpc_prot_vec[MAX_COMPACT_NODES];
+u64 xpc_prot_vec[MAX_NUMNODES];
/* this partition's reserved page */
{
unsigned long addr;
int ret;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 0, /* read */
+ port, size, __pa(val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus))
return -ENODEV;
int ret = size;
unsigned long paddr;
unsigned long *addr;
+ struct ia64_sal_retval isrv;
+
+ /*
+ * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
+ * around hw issues at the pci bus level. SGI proms older than
+ * 4.10 don't implment this.
+ */
+
+ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
+ pci_domain_nr(bus), bus->number,
+ 0, /* io */
+ 1, /* write */
+ port, size, __pa(&val));
+
+ if (isrv.status == 0)
+ return size;
+
+ /*
+ * If the above failed, retry using the SAL_PROBE call which should
+ * be present in all proms (but which cannot work round PCI chipset
+ * bugs). This code is retained for compatability with old
+ * pre-4.10 proms, and should be removed at some point in the future.
+ */
if (!SN_PCIBUS_BUSSOFT(bus)) {
ret = -ENODEV;
#include <linux/interrupt.h>
#include <linux/types.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcibr_provider.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/pcidev.h>
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_control |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_control, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_wid_control |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_tflush;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wid_tflush;
+ ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_int_status;
+ ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_int_status;
+ ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable &= ~bits;
+ __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_enable |= bits;
+ __sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR;
- ptr->tio.cp_int_addr[int_n] |=
- (addr & TIOCP_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ TIOCP_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
+ (addr & TIOCP_HOST_INTR_ADDR));
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR;
- ptr->pic.p_int_addr[int_n] |=
- (addr & PIC_HOST_INTR_ADDR);
+ __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
+ PIC_HOST_INTR_ADDR);
+ __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
+ (addr & PIC_HOST_INTR_ADDR));
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_force_pin[int_n] = 1;
+ writeq(1, &ptr->tio.cp_force_pin[int_n]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_force_pin[int_n] = 1;
+ writeq(1, &ptr->pic.p_force_pin[int_n]);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret = ptr->tio.cp_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ret = ptr->pic.p_wr_req_buf[device];
+ ret =
+ __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
break;
default:
panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr);
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
break;
case PCIBR_BRIDGETYPE_PIC:
- ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val;
+ writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
break;
default:
panic
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
case PCIBR_BRIDGETYPE_TIOCP:
- ret =
- (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]);
+ ret = &ptr->tio.cp_int_ate_ram[ate_index];
break;
case PCIBR_BRIDGETYPE_PIC:
- ret =
- (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]);
+ ret = &ptr->pic.p_int_ate_ram[ate_index];
break;
default:
panic
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
uint64_t offset;
struct page *tmp;
struct tioca_common *tioca_common;
- volatile struct tioca *ca_base;
+ struct tioca *ca_base;
tioca_common = tioca_kern->ca_common;
ca_base = (struct tioca *)tioca_common->ca_common.bs_base;
* DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
*/
- ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */
- ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
- ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT);
+ __sn_setq_relaxed(&ca_base->ca_control1,
+ CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */
+ __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+ __sn_setq_relaxed(&ca_base->ca_control2,
+ (0x2ull << CA_GART_MEM_PARAM_SHFT));
tioca_kern->ca_gart_iscoherent = 1;
- ca_base->ca_control2 &=
- ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB);
+ __sn_clrq_relaxed(&ca_base->ca_control2,
+ (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
/*
* Unmask GART fetch error interrupts. Clear residual errors first.
*/
- ca_base->ca_int_status_alias = CA_GART_FETCH_ERR;
- ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR;
- ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR;
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
+ writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
+ __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
/*
* Program the aperature and gart registers in TIOCA
*/
- ca_base->ca_gart_aperature = ap_reg;
- ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1;
+ writeq(ap_reg, &ca_base->ca_gart_aperature);
+ writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
return 0;
}
tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
{
int cap_ptr;
- uint64_t ca_control1;
uint32_t reg;
struct tioca *tioca_base;
struct pci_dev *pdev;
*/
tioca_base = (struct tioca *)common->ca_common.bs_base;
- ca_control1 = tioca_base->ca_control1;
- ca_control1 |= CA_AGP_FW_ENABLE;
- tioca_base->ca_control1 = ca_control1;
+ __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
}
EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
return 0;
}
- agp_dma_extn = ca_base->ca_agp_dma_addr_extn;
+ agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioce_provider.h>
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
- ate_reg[i + j] = ate;
+ writeq(ate, &ate_reg[i + j]);
addr += pagesize;
}
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- volatile uint64_t tmp;
+ uint64_t tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- ce_mmr->ce_ure_dir_map[port] = ct_upper;
+ writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
tmp = ce_mmr->ce_ure_dir_map[port];
dma_ok = 1;
} else
if (TIOCE_D32_ADDR(bus_addr)) {
if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
ce_kern->ce_port[port].dirmap_shadow = 0;
- ce_mmr->ce_ure_dir_map[port] = 0;
+ writeq(0, &ce_mmr->ce_ure_dir_map[port]);
}
} else {
struct tioce_dmamap *map;
*/
tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
- tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
- tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+ __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK);
+ __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE);
tioce_kern->ce_ate3240_pagesize = KB(256);
for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
tioce_kern->ce_ate40_shadow[i] = 0;
- tioce_mmr->ce_ure_ate40[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate40[i]);
}
for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
tioce_kern->ce_ate3240_shadow[i] = 0;
- tioce_mmr->ce_ure_ate3240[i] = 0;
+ writeq(0, &tioce_mmr->ce_ure_ate3240[i]);
}
return tioce_kern;
default:
return;
}
- ce_mmr->ce_adm_force_int = force_int_val;
+ writeq(force_int_val, &ce_mmr->ce_adm_force_int);
}
/**
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
+ uint64_t vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
bit = sn_irq_info->irq_int_bit;
- ce_mmr->ce_adm_int_mask |= (1UL << bit);
- ce_mmr->ce_adm_int_dest[bit] =
- ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
- sn_irq_info->irq_xtalkaddr;
- ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+ __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
+ vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector |= sn_irq_info->irq_xtalkaddr;
+ writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
+ __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
tioce_force_interrupt(sn_irq_info);
}
mpic->senses_count = senses_count;
/* Map the global registers */
- mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
- mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
+ mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000);
+ mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
BUG_ON(mpic->gregs == NULL);
/* Reset */
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
#include <asm/sn/pcidev.h>
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
ring_start = (dev_priv->cp_ring->offset
- dev->agp->base
+ dev_priv->gart_vm_start);
- } else
+ } else
#endif
ring_start = (dev_priv->cp_ring->offset
- - dev->sg->handle
+ - (unsigned long)dev->sg->virtual
+ dev_priv->gart_vm_start);
RADEON_WRITE( RADEON_CP_RB_BASE, ring_start );
drm_sg_mem_t *entry = dev->sg;
unsigned long tmp_ofs, page_ofs;
- tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle;
+ tmp_ofs = dev_priv->ring_rptr->offset -
+ (unsigned long)dev->sg->virtual;
page_ofs = tmp_ofs >> PAGE_SHIFT;
RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR,
else
#endif
dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset
- - dev->sg->handle
- + dev_priv->gart_vm_start);
+ - (unsigned long)dev->sg->virtual
+ + dev_priv->gart_vm_start);
DRM_DEBUG( "dev_priv->gart_size %d\n",
dev_priv->gart_size );
mmtimer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
int i;
- mmtimer_t *base = timers + cpuid_to_cnodeid(smp_processor_id()) *
+ mmtimer_t *base = timers + cpu_to_node(smp_processor_id()) *
NUM_COMPARATORS;
unsigned long expires = 0;
int result = IRQ_NONE;
*/
preempt_disable();
- nodeid = cpuid_to_cnodeid(smp_processor_id());
+ nodeid = cpu_to_node(smp_processor_id());
base = timers + nodeid * NUM_COMPARATORS;
retry:
/* Don't use an allocated timer, or a deleted one that's pending */
dev_t first_dev, dev;
nasid_t event_nasid = ia64_sn_get_console_nasid();
- if (alloc_chrdev_region(&first_dev, 0, numionodes,
+ if (alloc_chrdev_region(&first_dev, 0, num_cnodes,
SYSCTL_BASENAME) < 0) {
printk("%s: failed to register SN system controller device\n",
__FUNCTION__);
}
snsc_class = class_create(THIS_MODULE, SYSCTL_BASENAME);
- for (cnode = 0; cnode < numionodes; cnode++) {
+ for (cnode = 0; cnode < num_cnodes; cnode++) {
geoid = cnodeid_get_geoid(cnode);
devnamep = devname;
format_module_id(devnamep, geo_module(geoid),
mddev->curr_resync = 2;
try_again:
- if (signal_pending(current)) {
+ if (signal_pending(current) ||
+ kthread_should_stop()) {
flush_signals(current);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto skip;
*/
continue;
prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE);
- if (!signal_pending(current)
- && mddev2->curr_resync >= mddev->curr_resync) {
+ if (!signal_pending(current) &&
+ !kthread_should_stop() &&
+ mddev2->curr_resync >= mddev->curr_resync) {
printk(KERN_INFO "md: delaying resync of %s"
" until %s has finished resync (they"
" share one or more physical units)\n",
}
- if (signal_pending(current)) {
+ if (signal_pending(current) || kthread_should_stop()) {
/*
* got a signal, exit.
*/
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M );
-static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr)
+static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
+ unsigned size, int nr, const char *name)
{
region &= ~(size-1);
if (region) {
pcibios_bus_to_resource(dev, res, &bus_region);
pci_claim_resource(dev, nr);
+ printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
}
}
u16 region;
pci_read_config_word(dev, 0xE0, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
pci_read_config_word(dev, 0xE2, ®ion);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi );
+static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ mask = (devres >> 16) & 15;
+ base = devres & 0xffff;
+ size = 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it (at least if it's in the 0x1000+ range), but
+ * let's get enough confirmation reports first.
+ */
+ base &= -size;
+ printk("%s PIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
+static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ base = devres & 0xffff0000;
+ mask = (devres & 0x3f) << 16;
+ size = 128 << 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it, but let's get enough confirmation reports first.
+ */
+ base &= -size;
+ printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1);
+}
+
/*
* PIIX4 ACPI: Two IO regions pointed to by longwords at
* 0x40 (64 bytes of ACPI registers)
* 0x90 (32 bytes of SMB registers)
+ * and a few strange programmable PIIX4 device resources.
*/
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
{
- u32 region;
+ u32 region, res_a;
pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
pci_read_config_dword(dev, 0x90, ®ion);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+
+ /* Device resource A has enables for some of the other ones */
+ pci_read_config_dword(dev, 0x5c, &res_a);
+
+ piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
+ piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
+
+ /* Device resource D is just bitfields for static resources */
+
+ /* Device 12 enabled? */
+ if (res_a & (1 << 29)) {
+ piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
+ }
+ /* Device 13 enabled? */
+ if (res_a & (1 << 30)) {
+ piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
+ }
+ piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
+ piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi );
u32 region;
pci_read_config_dword(dev, 0x40, ®ion);
- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
pci_read_config_dword(dev, 0x58, ®ion);
- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1);
+ quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi );
if (rev & 0x10) {
pci_read_config_dword(dev, 0x48, ®ion);
region &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi );
pci_read_config_word(dev, 0x70, &hm);
hm &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1);
+ quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon");
pci_read_config_dword(dev, 0x90, &smb);
smb &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2);
+ quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi );
pci_read_config_word(dev, 0x88, &pm);
pm &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES);
+ quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
pci_read_config_word(dev, 0xd0, &smb);
smb &= PCI_BASE_ADDRESS_IO_MASK;
- quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1);
+ quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
rc = 4;
break;
case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+ case PCI_DEVICE_ID_HP_DIVA_HURRICANE:
rc = 1;
break;
}
}
irq_config = 0x41;
- if (dev->vendor == PCI_VENDOR_ID_PANACOM)
+ if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
+ dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) {
irq_config = 0x43;
+ }
if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
/*
/*
* PLX
*/
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_SUBVENDOR_ID_EXSYS,
+ .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9050,
pbn_panacom,
pbn_panacom2,
pbn_panacom4,
+ pbn_exsys_4055,
pbn_plx_romulus,
pbn_oxsemi,
pbn_intel_i960,
.reg_shift = 7,
},
+ [pbn_exsys_4055] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
/* I think this entry is broken - the first_offset looks wrong --rmk */
[pbn_plx_romulus] = {
.flags = FL_BASE2,
PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_EXSYS,
+ PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0,
+ pbn_exsys_4055 },
/*
* Megawolf Romulus PCI Serial Card, from Mike Hudson
* (Exoray@isys.ca)
init_MUTEX(&HFSPLUS_I(inode).extents_lock);
HFSPLUS_I(inode).flags = 0;
HFSPLUS_I(inode).rsrc_inode = NULL;
+ atomic_set(&HFSPLUS_I(inode).opencnt, 0);
if (inode->i_ino >= HFSPLUS_FIRSTUSER_CNID) {
read_inode:
* the clz instruction for much better code efficiency.
*/
-static __inline__ int generic_fls(int x);
#define fls(x) \
( __builtin_constant_p(x) ? generic_fls(x) : \
({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
-extern ia64_mv_setup_t dig_setup;
-extern ia64_mv_setup_t sba_setup;
+extern ia64_mv_setup_t dig_setup;
extern ia64_mv_dma_alloc_coherent sba_alloc_coherent;
extern ia64_mv_dma_free_coherent sba_free_coherent;
extern ia64_mv_dma_map_single sba_map_single;
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
-#define platform_name "hpzx1"
-#define platform_setup sba_setup
-#define platform_dma_init machvec_noop
-#define platform_dma_alloc_coherent sba_alloc_coherent
-#define platform_dma_free_coherent sba_free_coherent
-#define platform_dma_map_single sba_map_single
-#define platform_dma_unmap_single sba_unmap_single
-#define platform_dma_map_sg sba_map_sg
-#define platform_dma_unmap_sg sba_unmap_sg
+#define platform_name "hpzx1"
+#define platform_setup dig_setup
+#define platform_dma_init machvec_noop
+#define platform_dma_alloc_coherent sba_alloc_coherent
+#define platform_dma_free_coherent sba_free_coherent
+#define platform_dma_map_single sba_map_single
+#define platform_dma_unmap_single sba_unmap_single
+#define platform_dma_map_sg sba_map_sg
+#define platform_dma_unmap_sg sba_unmap_sg
#define platform_dma_sync_single_for_cpu machvec_dma_sync_single
#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg
#define platform_dma_sync_single_for_device machvec_dma_sync_single
#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
extern ia64_mv_setup_t dig_setup;
-extern ia64_mv_dma_init hwsw_init;
extern ia64_mv_dma_alloc_coherent hwsw_alloc_coherent;
extern ia64_mv_dma_free_coherent hwsw_free_coherent;
extern ia64_mv_dma_map_single hwsw_map_single;
#define platform_name "hpzx1_swiotlb"
#define platform_setup dig_setup
-#define platform_dma_init hwsw_init
+#define platform_dma_init machvec_noop
#define platform_dma_alloc_coherent hwsw_alloc_coherent
#define platform_dma_free_coherent hwsw_free_coherent
#define platform_dma_map_single hwsw_map_single
* - initrd (optional)
* - command line string
* - kernel code & data
+ * - Kernel memory map built from EFI memory map
*
* More could be added if necessary
*/
-#define IA64_MAX_RSVD_REGIONS 5
+#define IA64_MAX_RSVD_REGIONS 6
struct rsvd_region {
unsigned long start; /* virtual address of beginning of element */
extern void reserve_memory (void);
extern void find_initrd (void);
extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+extern void efi_memmap_init(unsigned long *, unsigned long *);
/*
* For rounding an address to the next IA64_GRANULE_SIZE or order
#define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
#else
# define call_pernode_memory(start, len, func) (*func)(start, len, 0)
#include <asm/page.h>
#include <asm/meminit.h>
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
static inline int pfn_to_nid(unsigned long pfn)
{
#endif
}
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+extern int early_pfn_to_nid(unsigned long pfn);
+#endif
+
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
-#else /* CONFIG_DISCONTIGMEM */
+#else /* CONFIG_NUMA */
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
-#endif /* CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_MMZONE_H */
#include <asm/percpu.h>
#include <asm/mmzone.h>
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
/*
* Node Data. One of these structures is located on each node of a NUMA system.
*/
#define NODE_DATA(nid) (local_node_data->pg_data_ptrs[nid])
-#endif /* CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_NUMA */
#endif /* _ASM_IA64_NODEDATA_H */
#ifdef CONFIG_VIRTUAL_MEM_MAP
extern int ia64_pfn_valid (unsigned long pfn);
-#else
+#elif defined(CONFIG_FLATMEM)
# define ia64_pfn_valid(pfn) 1
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
# define pfn_valid(pfn) (((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
# define page_to_pfn(page) ((unsigned long) (page - mem_map))
# define pfn_to_page(pfn) (mem_map + (pfn))
-#else
+#elif defined(CONFIG_DISCONTIGMEM)
extern struct page *vmem_map;
extern unsigned long max_low_pfn;
# define pfn_valid(pfn) (((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
#include <asm/sn/types.h>
#include <asm/sn/sn_cpuid.h>
+/*
+ * This is the maximum number of NUMALINK nodes that can be part of a single
+ * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
+ * remote partitions are NOT included in this number.
+ * The number of compact nodes cannot exceed size of a coherency domain.
+ * The purpose of this define is to specify a node count that includes
+ * all C/M/TIO nodes in an SSI system.
+ *
+ * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
+ *
+ * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
+ * to ACPI3.0, this limit will be removed. The notion of "compact nodes"
+ * should be deleted and TIOs should be included in MAX_NUMNODES.
+ */
+#define MAX_COMPACT_NODES 512
+
+/*
+ * Maximum number of nodes in all partitions and in all coherency domains.
+ * This is the total number of nodes accessible in the numalink fabric. It
+ * includes all C & M bricks, plus all TIOs.
+ *
+ * This value is also the value of the maximum number of NASIDs in the numalink
+ * fabric.
+ */
+#define MAX_NUMALINK_NODES 16384
+
/*
* The following defines attributes of the HUB chip. These attributes are
* frequently referenced. They are kept in the per-cpu data areas of each cpu.
#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
-/*
- * This is the maximum number of nodes that can be part of a kernel.
- * Effectively, it's the maximum number of compact node ids (cnodeid_t).
- * This is not necessarily the same as MAX_NASIDS.
- */
-#define MAX_COMPACT_NODES 2048
-#define CPUS_PER_NODE 4
-
-
/*
* Compact node ID to nasid mappings kept in the per-cpu data areas of each
* cpu.
#define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
-
extern u8 sn_partition_id;
extern u8 sn_system_size;
extern u8 sn_sharing_domain_size;
extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
extern void __sn_mmiowb(void); /* Forward definition */
-extern int numionodes;
+extern int num_cnodes;
#define __sn_mf_a() ia64_mfa()
#define __sn_readl_relaxed ___sn_readl_relaxed
#define __sn_readq_relaxed ___sn_readq_relaxed
+/*
+ * Convenience macros for setting/clearing bits using the above accessors
+ */
+
+#define __sn_setq_relaxed(addr, val) \
+ writeq((__sn_readq_relaxed(addr) | (val)), (addr))
+#define __sn_clrq_relaxed(addr, val) \
+ writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
+
/*
* The following routines are SN Platform specific, called when
* a reference is made to inX/outX set macros. SN Platform
klconf_off_t brd_next_same; /* Next BOARD with same nasid */
} lboard_t;
-#define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts)
-#define NODE_OFFSET_TO_KLINFO(n,off) ((klinfo_t*) TO_NODE_CAC(n,off))
-#define KLCF_NEXT(_brd) \
- ((_brd)->brd_next_same ? \
- (NODE_OFFSET_TO_LBOARD((_brd)->brd_next_same_host, (_brd)->brd_next_same)): NULL)
-#define KLCF_NEXT_ANY(_brd) \
- ((_brd)->brd_next_any ? \
- (NODE_OFFSET_TO_LBOARD(NASID_GET(_brd), (_brd)->brd_next_any)): NULL)
-#define KLCF_COMP(_brd, _ndx) \
- ((((_brd)->brd_compts[(_ndx)]) == 0) ? 0 : \
- (NODE_OFFSET_TO_KLINFO(NASID_GET(_brd), (_brd)->brd_compts[(_ndx)])))
-
-
/*
* Generic info structure. This stores common info about a
* component.
} klinfo_t ;
-static inline lboard_t *find_lboard_any(lboard_t * start, unsigned char brd_type)
+static inline lboard_t *find_lboard_next(lboard_t * brd)
{
- /* Search all boards stored on this node. */
-
- while (start) {
- if (start->brd_type == brd_type)
- return start;
- start = KLCF_NEXT_ANY(start);
- }
- /* Didn't find it. */
- return (lboard_t *) NULL;
+ if (brd && brd->brd_next_any)
+ return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
+ return NULL;
}
-
-/* external declarations of Linux kernel functions. */
-
-extern lboard_t *root_lboard[];
-extern klinfo_t *find_component(lboard_t *brd, klinfo_t *kli, unsigned char type);
-extern klinfo_t *find_first_component(lboard_t *brd, unsigned char type);
-
#endif /* _ASM_IA64_SN_KLCONFIG_H */
#define L1_BRICKTYPE_ATHENA 0x2b /* + */
#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
+/* board type response codes */
+#define L1_BOARDTYPE_IP69 0x0100 /* CA */
+#define L1_BOARDTYPE_IP63 0x0200 /* CB */
+#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
+#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
+#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
+#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
+#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
+#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
+#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
+
+
#endif /* _ASM_IA64_SN_L1_H */
*/
struct phys_cpuid phys_cpuid[NR_CPUS];
spinlock_t ptc_lock ____cacheline_aligned_in_smp;
- spinlock_t bist_lock;
};
typedef struct nodepda_s nodepda_t;
#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
-#define cpuid_to_cnodeid(cpuid) (physical_node_map[cpuid_to_nasid(cpuid)])
/*
* of potentially large tables.
*/
extern int nasid_slice_to_cpuid(int, int);
-#define nasid_slice_to_cpu_physical_id(nasid, slice) \
- cpu_physical_id(nasid_slice_to_cpuid(nasid, slice))
/*
* cnodeid_to_nasid - convert a cnodeid to a NASID
#define SN_SAL_CONSOLE_PUTB 0x02000028
#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
#define SN_SAL_CONSOLE_READC 0x0200002b
+#define SN_SAL_SYSCTL_OP 0x02000030
#define SN_SAL_SYSCTL_MODID_GET 0x02000031
#define SN_SAL_SYSCTL_GET 0x02000032
#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
#define SN_SAL_IOIF_INTERRUPT 0x0200004a
#define SN_SAL_HWPERF_OP 0x02000050 // lock
#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
-
+#define SN_SAL_IOIF_PCI_SAFE 0x02000052
#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
#define SAL_INTR_ALLOC 1
#define SAL_INTR_FREE 2
+/*
+ * operations available on the generic SN_SAL_SYSCTL_OP
+ * runtime service
+ */
+#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */
+#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */
+
/*
* IRouter (i.e. generalized system controller) operations
*/
return ret_stuff.v0;
}
-static inline char *
+static inline void *
ia64_sn_get_klconfig_addr(nasid_t nasid)
{
struct ia64_sal_retval ret_stuff;
- int cnodeid;
- cnodeid = nasid_to_cnodeid(nasid);
ret_stuff.status = 0;
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
-
- /*
- * We should panic if a valid cnode nasid does not produce
- * a klconfig address.
- */
- if (ret_stuff.status != 0) {
- panic("ia64_sn_get_klconfig_addr: Returned error %lx\n", ret_stuff.status);
- }
return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
}
unsigned long irq_flags;
cnodeid = nasid_to_cnodeid(get_node_number(paddr));
- // spin_lock(&NODEPDA(cnodeid)->bist_lock);
local_irq_save(irq_flags);
ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
(u64)nasid_array, perms, 0, 0, 0);
local_irq_restore(irq_flags);
- // spin_unlock(&NODEPDA(cnodeid)->bist_lock);
return ret_stuff.status;
}
#define SN_MEMPROT_ACCESS_CLASS_0 0x14a080
return (int) rv.v0;
}
+/*
+ * Ask the system controller on the specified nasid to reset
+ * the CX corelet clock. Only valid on TIO nodes.
+ */
+static inline int
+ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
+ nasid, 0, 0, 0, 0, 0);
+ if (rv.status != 0)
+ return (int)rv.status;
+ if (rv.v0 != 0)
+ return (int)rv.v0;
+
+ return 0;
+}
+
+/*
+ * Get the associated ioboard type for a given nasid.
+ */
+static inline int
+ia64_sn_sysctl_ioboard_get(nasid_t nasid)
+{
+ struct ia64_sal_retval rv;
+ SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
+ nasid, 0, 0, 0, 0, 0);
+ if (rv.v0 != 0)
+ return (int)rv.v0;
+ if (rv.v1 != 0)
+ return (int)rv.v1;
+
+ return 0;
+}
+
/**
* ia64_sn_get_fit_compt - read a FIT entry from the PROM header
* @nasid: NASID of node to read
* touch every CL aligned GART entry.
*/
- ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM);
- ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
- ca_base->ca_control2 |=
- (0x2ull << CA_GART_MEM_PARAM_SHFT);
- tmp = ca_base->ca_control2;
+ __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+ __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+ __sn_setq_relaxed(&ca_base->ca_control2,
+ (0x2ull << CA_GART_MEM_PARAM_SHFT));
+ tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
return;
* Gart in uncached mode ... need an explicit flush.
*/
- ca_base->ca_control2 |= CA_GART_FLUSH_TLB;
- tmp = ca_base->ca_control2;
+ __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+ tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
extern uint32_t tioca_gart_found;
struct cx_dev {
struct cx_id_s cx_id;
+ int bt; /* board/blade type */
void *soft; /* driver specific */
struct hubdev_info *hubdev;
struct device dev;
extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
extern void tiocx_irq_free(struct sn_irq_info *);
extern int cx_device_unregister(struct cx_dev *);
-extern int cx_device_register(nasid_t, int, int, struct hubdev_info *);
+extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
extern int cx_driver_unregister(struct cx_drv *);
extern int cx_driver_register(struct cx_drv *);
extern uint64_t tiocx_dma_addr(uint64_t addr);
* C-brick nasids, thus the need for bitmaps which don't account for
* odd-numbered (non C-brick) nasids.
*/
-#define XP_MAX_PHYSNODE_ID (MAX_PHYSNODE_ID / 2)
+#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2)
#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8)
#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64)
--- /dev/null
+#ifndef _ASM_IA64_SPARSEMEM_H
+#define _ASM_IA64_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS 2^N: how big each section will be
+ * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space
+ */
+
+#define SECTION_SIZE_BITS (30)
+#define MAX_PHYSMEM_BITS (50)
+#ifdef CONFIG_FORCE_MAX_ZONEORDER
+#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#undef SECTION_SIZE_BITS
+#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#endif
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_IA64_SPARSEMEM_H */
#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282
#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
+#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a
#define PCI_DEVICE_ID_HP_CISS 0x3210
#define PCI_DEVICE_ID_HP_CISSA 0x3220
#define PCI_DEVICE_ID_HP_CISSB 0x3222
#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
+#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
#define PCI_VENDOR_ID_TIGERJET 0xe159
#define PCI_DEVICE_ID_TIGERJET_300 0x0001
{
if (skb->protocol == ntohs(ETH_P_802_2))
memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN);
- else if (skb->protocol == ntohs(ETH_P_TR_802_2))
+ else if (skb->protocol == ntohs(ETH_P_TR_802_2)) {
memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN);
+ *sa &= 0x7F;
+ }
}
/**
tsk->flags |= PF_EXITING;
+ /*
+ * Make sure we don't try to process any timer firings
+ * while we are already exiting.
+ */
+ tsk->it_virt_expires = cputime_zero;
+ tsk->it_prof_expires = cputime_zero;
+ tsk->it_sched_expires = 0;
+
if (unlikely(in_atomic()))
printk(KERN_INFO "note: %s[%d] exited with preempt_count %d\n",
current->comm, current->pid,
* Update expiry time from increment, and increase overrun count,
* given the current clock sample.
*/
-static inline void bump_cpu_timer(struct k_itimer *timer,
+static void bump_cpu_timer(struct k_itimer *timer,
union cpu_time_count now)
{
int i;
for (i = 0; incr < delta - incr; i++)
incr = incr << 1;
for (; i >= 0; incr >>= 1, i--) {
- if (delta <= incr)
+ if (delta < incr)
continue;
timer->it.cpu.expires.sched += incr;
timer->it_overrun += 1 << i;
for (i = 0; cputime_lt(incr, cputime_sub(delta, incr)); i++)
incr = cputime_add(incr, incr);
for (; i >= 0; incr = cputime_halve(incr), i--) {
- if (cputime_le(delta, incr))
+ if (cputime_lt(delta, incr))
continue;
timer->it.cpu.expires.cpu =
cputime_add(timer->it.cpu.expires.cpu, incr);
left = cputime_div(cputime_sub(expires.cpu, val.cpu),
nthreads);
do {
- if (!unlikely(t->exit_state)) {
+ if (!unlikely(t->flags & PF_EXITING)) {
ticks = cputime_add(prof_ticks(t), left);
if (cputime_eq(t->it_prof_expires,
cputime_zero) ||
left = cputime_div(cputime_sub(expires.cpu, val.cpu),
nthreads);
do {
- if (!unlikely(t->exit_state)) {
+ if (!unlikely(t->flags & PF_EXITING)) {
ticks = cputime_add(virt_ticks(t), left);
if (cputime_eq(t->it_virt_expires,
cputime_zero) ||
nsleft = expires.sched - val.sched;
do_div(nsleft, nthreads);
do {
- if (!unlikely(t->exit_state)) {
+ if (!unlikely(t->flags & PF_EXITING)) {
ns = t->sched_time + nsleft;
if (t->it_sched_expires == 0 ||
t->it_sched_expires > ns) {
struct cpu_timer_list *next;
unsigned long i;
+ if (CPUCLOCK_PERTHREAD(timer->it_clock) && (p->flags & PF_EXITING))
+ return;
+
head = (CPUCLOCK_PERTHREAD(timer->it_clock) ?
p->cpu_timers : p->signal->cpu_timers);
head += CPUCLOCK_WHICH(timer->it_clock);
listpos = head;
if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) {
list_for_each_entry(next, head, entry) {
- if (next->expires.sched > nt->expires.sched) {
- listpos = &next->entry;
+ if (next->expires.sched > nt->expires.sched)
break;
- }
+ listpos = &next->entry;
}
} else {
list_for_each_entry(next, head, entry) {
- if (cputime_gt(next->expires.cpu, nt->expires.cpu)) {
- listpos = &next->entry;
+ if (cputime_gt(next->expires.cpu, nt->expires.cpu))
break;
- }
+ listpos = &next->entry;
}
}
list_add(&nt->entry, listpos);
do {
t = next_thread(t);
- } while (unlikely(t->exit_state));
+ } while (unlikely(t->flags & PF_EXITING));
} while (t != tsk);
}
}
#undef UNEXPIRED
+ BUG_ON(tsk->exit_state);
+
/*
* Double-check with locks held.
*/
read_lock(&tasklist_lock);
- if (likely(tsk->signal != NULL)) {
- spin_lock(&tsk->sighand->siglock);
+ spin_lock(&tsk->sighand->siglock);
- /*
- * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N]
- * all the timers that are firing, and put them on the firing list.
- */
- check_thread_timers(tsk, &firing);
- check_process_timers(tsk, &firing);
+ /*
+ * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N]
+ * all the timers that are firing, and put them on the firing list.
+ */
+ check_thread_timers(tsk, &firing);
+ check_process_timers(tsk, &firing);
- /*
- * We must release these locks before taking any timer's lock.
- * There is a potential race with timer deletion here, as the
- * siglock now protects our private firing list. We have set
- * the firing flag in each timer, so that a deletion attempt
- * that gets the timer lock before we do will give it up and
- * spin until we've taken care of that timer below.
- */
- spin_unlock(&tsk->sighand->siglock);
- }
+ /*
+ * We must release these locks before taking any timer's lock.
+ * There is a potential race with timer deletion here, as the
+ * siglock now protects our private firing list. We have set
+ * the firing flag in each timer, so that a deletion attempt
+ * that gets the timer lock before we do will give it up and
+ * spin until we've taken care of that timer below.
+ */
+ spin_unlock(&tsk->sighand->siglock);
read_unlock(&tasklist_lock);
/*
#ifndef CONFIG_SMP
cpumask_t cpu_online_map = CPU_MASK_ALL;
+EXPORT_SYMBOL_GPL(cpu_online_map);
cpumask_t cpu_possible_map = CPU_MASK_ALL;
#endif
{
struct per_cpu_pages *pcp;
+ memset(p, 0, sizeof(*p));
+
pcp = &p->pcp[0]; /* hot */
pcp->count = 0;
pcp->low = 2 * batch;
unsigned int hash, rii_p = 0;
unsigned long flags;
struct rif_cache *entry;
-
+ unsigned char saddr0;
spin_lock_irqsave(&rif_lock, flags);
+ saddr0 = trh->saddr[0];
/*
* Firstly see if the entry exists
entry->rcf = trh->rcf & htons((unsigned short)~TR_RCF_BROADCAST_MASK);
memcpy(&(entry->rseg[0]),&(trh->rseg[0]),8*sizeof(unsigned short));
entry->local_ring = 0;
- trh->saddr[0]|=TR_RII; /* put the routing indicator back for tcpdump */
}
else
{
}
entry->last_used=jiffies;
}
+ trh->saddr[0]=saddr0; /* put the routing indicator back for tcpdump */
spin_unlock_irqrestore(&rif_lock, flags);
}
/* Old location, field to be removed in next WE */
if(dev->get_wireless_stats) {
- printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
- dev->name);
+ static int printed_message;
+
+ if (!printed_message++)
+ printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n",
+ dev->name);
+
return dev->get_wireless_stats(dev);
}
+
/* Not found */
return (struct iw_statistics *) NULL;
}
goto done;
}
fl1 = sfl->fl;
- atomic_inc(&fl->users);
+ atomic_inc(&fl1->users);
break;
}
}
struct timeval tv;
tv.tv_sec = xtime.tv_sec;
- tv.tv_usec = xtime.tv_nsec * 1000;
+ tv.tv_usec = xtime.tv_nsec / NSEC_PER_USEC;
skb_set_timestamp(skb, &tv);
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */
projects / linux-2.6-microblaze.git / commitdiff