arm64: dts: imx: Add Beacon i.MX8m-Mini development kit

Beacon Embeddedworks is launching a development kit based on the
i.MX8M Mini SoC.  The kit consists of a System on Module (SOM)
+ baseboard.  The SOM has the SoC, eMMC, and Ethernet. The baseboard
has an wm8962 audio CODEC, a single USB OTG, and three USB host ports.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
new file mode 100644 (file)
index 0000000..baa5f99
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+       leds {
+               compatible = "gpio-leds";
+
+               led0 {
+                       label = "gen_led0";
+                       gpios = <&pca6416_1 4 GPIO_ACTIVE_HIGH>;
+                       default-state = "none";
+               };
+
+               led1 {
+                       label = "gen_led1";
+                       gpios = <&pca6416_1 5 GPIO_ACTIVE_HIGH>;
+                       default-state = "none";
+               };
+
+               led2 {
+                       label = "gen_led2";
+                       gpios = <&pca6416_1 6 GPIO_ACTIVE_HIGH>;
+                       default-state = "none";
+               };
+
+               led3 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_led3>;
+                       label = "heartbeat";
+                       gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       reg_audio: regulator-audio {
+               compatible = "regulator-fixed";
+               regulator-name = "3v3_aud";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_usdhc2_vmmc: regulator-usdhc2 {
+               compatible = "regulator-fixed";
+               regulator-name = "VSD_3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       sound {
+               compatible = "fsl,imx-audio-wm8962";
+               model = "wm8962-audio";
+               audio-cpu = <&sai3>;
+               audio-codec = <&wm8962>;
+               audio-routing =
+                       "Headphone Jack", "HPOUTL",
+                       "Headphone Jack", "HPOUTR",
+                       "Ext Spk", "SPKOUTL",
+                       "Ext Spk", "SPKOUTR",
+                       "AMIC", "MICBIAS",
+                       "IN3R", "AMIC";
+       };
+};
+
+&ecspi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_espi2>;
+       cs-gpios = <&gpio5 9 0>;
+       status = "okay";
+
+       eeprom@0 {
+               compatible = "microchip,at25160bn", "atmel,at25";
+               reg = <0>;
+               spi-max-frequency = <5000000>;
+               spi-cpha;
+               spi-cpol;
+               pagesize = <32>;
+               size = <2048>;
+               address-width = <16>;
+       };
+};
+
+&i2c2 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+};
+
+&i2c4 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c4>;
+       status = "okay";
+
+       wm8962: audio-codec@1a {
+               compatible = "wlf,wm8962";
+               reg = <0x1a>;
+               clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+               clock-names = "xclk";
+               DCVDD-supply = <&reg_audio>;
+               DBVDD-supply = <&reg_audio>;
+               AVDD-supply = <&reg_audio>;
+               CPVDD-supply = <&reg_audio>;
+               MICVDD-supply = <&reg_audio>;
+               PLLVDD-supply = <&reg_audio>;
+               SPKVDD1-supply = <&reg_audio>;
+               SPKVDD2-supply = <&reg_audio>;
+               gpio-cfg = <
+                       0x0000 /* 0:Default */
+                       0x0000 /* 1:Default */
+                       0x0000 /* 2:FN_DMICCLK */
+                       0x0000 /* 3:Default */
+                       0x0000 /* 4:FN_DMICCDAT */
+                       0x0000 /* 5:Default */
+               >;
+       };
+
+       pca6416_0: gpio@20 {
+               compatible = "nxp,pcal6416";
+               reg = <0x20>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pcal6414>;
+               gpio-controller;
+               #gpio-cells = <2>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+       };
+
+       pca6416_1: gpio@21 {
+               compatible = "nxp,pcal6416";
+               reg = <0x21>;
+               gpio-controller;
+               #gpio-cells = <2>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&sai3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sai3>;
+       assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+       assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+       assigned-clock-rates = <24576000>;
+       fsl,sai-mclk-direction-output;
+       status = "okay";
+};
+
+&snvs_pwrkey {
+       status = "okay";
+};
+
+&uart2 { /* console */
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart3>;
+       assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+       assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+       pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+       bus-width = <4>;
+       vmmc-supply = <&reg_usdhc2_vmmc>;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl_espi2: espi2grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK            0x82
+                       MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI            0x82
+                       MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO            0x82
+                       MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9               0x41
+               >;
+       };
+
+       pinctrl_i2c2: i2c2grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL          0x400001c3
+                       MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA          0x400001c3
+               >;
+       };
+
+       pinctrl_i2c4: i2c4grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL          0x400001c3
+                       MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA          0x400001c3
+               >;
+       };
+
+       pinctrl_led3: led3grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28       0x41
+               >;
+       };
+
+       pinctrl_pcal6414: pcal6414-gpio {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27               0x19
+               >;
+       };
+
+       pinctrl_sai3: sai3grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+                       MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+                       MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+                       MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+                       MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0     0xd6
+               >;
+       };
+
+       pinctrl_uart2: uart2grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+                       MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+               >;
+       };
+
+       pinctrl_uart3: uart3grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX   0x40
+                       MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX   0x40
+               >;
+       };
+
+       pinctrl_usdhc2_gpio: usdhc2grpgpio {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B       0x41
+                       MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19     0x41
+               >;
+       };
+
+       pinctrl_usdhc2: usdhc2grp {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+                       MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+                       MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d0
+                       MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d0
+                       MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d0
+                       MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d0
+                       MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+               >;
+       };
+
+       pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+                       MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+                       MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d4
+                       MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d4
+                       MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d4
+                       MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d4
+                       MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+               >;
+       };
+
+       pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+               fsl,pins = <
+                       MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+                       MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+                       MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0     0x1d6
+                       MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1     0x1d6
+                       MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2     0x1d6
+                       MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3     0x1d6
+                       MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+               >;
+       };
+};

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
new file mode 100644 (file)
index 0000000..74a7b0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+#include "imx8mm-beacon-som.dtsi"
+#include "imx8mm-beacon-baseboard.dtsi"
+
+/ {
+       model = "Beacon EmbeddedWorks i.MX8M Mini Development Kit";
+       compatible = "beacon,imx8mm-beacon-kit", "fsl,imx8mm";
+
+       chosen {
+               stdout-path = &uart2;
+       };
+};

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
new file mode 100644 (file)
index 0000000..fb0137a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Compass Electronics Group, LLC
+ */
+
+/ {
+       usdhc1_pwrseq: usdhc1_pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usdhc1_gpio>;
+               reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+               clocks = <&osc_32k>;
+               clock-names = "ext_clock";
+               post-power-on-delay-ms = <80>;
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               reg = <0x0 0x40000000 0 0x80000000>;
+       };
+};
+
+&A53_0 {
+       cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+       operating-points-v2 = <&ddrc_opp_table>;
+
+       ddrc_opp_table: opp-table {
+               compatible = "operating-points-v2";
+
+               opp-25M {
+                       opp-hz = /bits/ 64 <25000000>;
+               };
+
+               opp-100M {
+                       opp-hz = /bits/ 64 <100000000>;
+               };
+
+               opp-750M {
+                       opp-hz = /bits/ 64 <750000000>;
+               };
+       };
+};
+
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
+       phy-mode = "rgmii-id";
+       phy-handle = <&ethphy0>;
+       fsl,magic-packet;
+       status = "okay";
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               ethphy0: ethernet-phy@0 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <0>;
+               };
+       };
+};
+
+&i2c1 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       pmic@4b {
+               compatible = "rohm,bd71847";
+               reg = <0x4b>;
+               pinctrl-0 = <&pinctrl_pmic>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <3 GPIO_ACTIVE_LOW>;
+               rohm,reset-snvs-powered;
+
+               regulators {
+                       buck1_reg: BUCK1 {
+                               regulator-name = "BUCK1";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <1250>;
+                       };
+
+                       buck2_reg: BUCK2 {
+                               regulator-name = "BUCK2";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                               regulator-ramp-delay = <1250>;
+                               rohm,dvs-run-voltage = <1000000>;
+                               rohm,dvs-idle-voltage = <900000>;
+                       };
+
+                       buck3_reg: BUCK3 {
+                               // BUCK5 in datasheet
+                               regulator-name = "BUCK3";
+                               regulator-min-microvolt = <700000>;
+                               regulator-max-microvolt = <1350000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck4_reg: BUCK4 {
+                               // BUCK6 in datasheet
+                               regulator-name = "BUCK4";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck5_reg: BUCK5 {
+                               // BUCK7 in datasheet
+                               regulator-name = "BUCK5";
+                               regulator-min-microvolt = <1605000>;
+                               regulator-max-microvolt = <1995000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       buck6_reg: BUCK6 {
+                               // BUCK8 in datasheet
+                               regulator-name = "BUCK6";
+                               regulator-min-microvolt = <800000>;
+                               regulator-max-microvolt = <1400000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo1_reg: LDO1 {
+                               regulator-name = "LDO1";
+                               regulator-min-microvolt = <3000000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo2_reg: LDO2 {
+                               regulator-name = "LDO2";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <900000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo3_reg: LDO3 {
+                               regulator-name = "LDO3";
+                               regulator-min-microvolt = <1800000>;
+                               regulator-max-microvolt = <3300000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo4_reg: LDO4 {
+                               regulator-name = "LDO4";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       ldo6_reg: LDO6 {
+                               regulator-name = "LDO6";
+                               regulator-min-microvolt = <900000>;
+                               regulator-max-microvolt = <1800000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+&i2c3 {
+       clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       status = "okay";
+
+       eeprom@50 {
+               compatible = "microchip, at24c64d", "atmel,24c64";
+               pagesize = <32>;
+               read-only;      /* Manufacturing EEPROM programmed at factory */
+               reg = <0x50>;
+       };
+
+       rtc@51 {
+               compatible = "nxp,pcf85263";
+               reg = <0x51>;
+       };
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+       assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+       uart-has-rtscts;
+       status = "okay";
+
+       bluetooth {
+               compatible = "brcm,bcm43438-bt";
+               shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+               host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+               device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+               clocks = <&osc_32k>;
+               clock-names = "extclk";
+       };
+};
+
+&usdhc1 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc1>;
+       bus-width = <4>;
+       non-removable;
+       cap-power-off-card;
+       pm-ignore-notify;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&usdhc1_pwrseq>;
+       status = "okay";
+
+       brcmf: bcrmf@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_wlan>;
+               interrupt-parent = <&gpio2>;
+               interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "host-wake";
+       };
+};
+
+&usdhc3 {
+       pinctrl-names = "default", "state_100mhz", "state_200mhz";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+       pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+       bus-width = <8>;
+       non-removable;
+       status = "okay";
+};
+
+&wdog1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_wdog>;
+       fsl,ext-reset-output;
+       status = "okay";
+};
+
+&iomuxc {
+               pinctrl_fec1: fec1grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_ENET_MDC_ENET1_MDC         0x3
+                               MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO       0x3
+                               MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3   0x1f
+                               MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2   0x1f
+                               MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1   0x1f
+                               MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0   0x1f
+                               MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3   0x91
+                               MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2   0x91
+                               MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1   0x91
+                               MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0   0x91
+                               MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC   0x1f
+                               MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC   0x91
+                               MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL     0x91
+                               MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL     0x1f
+                               MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22        0x19
+                       >;
+               };
+
+               pinctrl_i2c1: i2c1grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL          0x400001c3
+                               MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA          0x400001c3
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL          0x400001c3
+                               MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA          0x400001c3
+                       >;
+               };
+
+               pinctrl_pmic: pmicirq {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3               0x41
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
+                               MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
+                               MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B  0x140
+                               MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B  0x140
+                               MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6        0x19
+                               MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7        0x19
+                               MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8        0x19
+                               MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K      0x141
+                       >;
+               };
+
+               pinctrl_usdhc1_gpio: usdhc1grpgpio {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10     0x41
+                       >;
+               };
+
+               pinctrl_usdhc1: usdhc1grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x190
+                               MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d0
+                               MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d0
+                               MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d0
+                               MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d0
+                               MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d0
+                       >;
+               };
+
+               pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x194
+                               MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d4
+                               MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d4
+                               MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d4
+                               MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d4
+                               MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d4
+                       >;
+               };
+
+               pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         0x196
+                               MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         0x1d6
+                               MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0     0x1d6
+                               MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1     0x1d6
+                               MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2     0x1d6
+                               MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3     0x1d6
+                       >;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x190
+                               MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d0
+                               MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d0
+                               MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d0
+                               MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d0
+                               MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d0
+                               MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d0
+                               MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d0
+                               MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d0
+                               MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d0
+                               MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x190
+                       >;
+               };
+
+               pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x194
+                               MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d4
+                               MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d4
+                               MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d4
+                               MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d4
+                               MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d4
+                               MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d4
+                               MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d4
+                               MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d4
+                               MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d4
+                               MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x194
+                       >;
+               };
+
+               pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK               0x196
+                               MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD               0x1d6
+                               MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0           0x1d6
+                               MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1           0x1d6
+                               MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2           0x1d6
+                               MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3           0x1d6
+                               MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4             0x1d6
+                               MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5            0x1d6
+                               MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6            0x1d6
+                               MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7              0x1d6
+                               MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE           0x196
+                       >;
+               };
+
+               pinctrl_wdog: wdoggrp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B            0xc6
+                       >;
+               };
+
+               pinctrl_wlan: wlangrp {
+                       fsl,pins = <
+                               MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9                0x111
+                       >;
+               };
+};