static void dm_send_rssi_tofw(struct net_device *dev);
static void dm_ctstoself(struct net_device *dev);
-//================================================================================
-// HW Dynamic mechanism interface.
-//================================================================================
-
-//
-// Description:
-// Prepare SW resource for HW dynamic mechanism.
-//
-// Assumption:
-// This function is only invoked at driver intialization once.
-//
-//
+/*
+ * Prepare SW resource for HW dynamic mechanism.
+ * This function is only invoked at driver intialization once.
+ */
void init_hal_dm(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
}
-/*-----------------------------------------------------------------------------
- * Function: dm_check_rate_adaptive()
- *
- * Overview:
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/26/08 amy Create version 0 proting from windows code.
- *
- *---------------------------------------------------------------------------*/
static void dm_check_rate_adaptive(struct net_device * dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
}
#endif
-/*-----------------------------------------------------------------------------
- * Function: dm_change_dynamic_initgain_thresh()
- *
- * Overview:
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/29/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+
void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type, u32 dm_value)
{
if (dm_type == DIG_TYPE_THRESH_HIGH)
}
-/*-----------------------------------------------------------------------------
- * Function: dm_dig_init()
- *
- * Overview: Set DIG scheme init value.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/15/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/* Set DIG scheme init value. */
static void dm_dig_init(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
}
-/*-----------------------------------------------------------------------------
- * Function: dm_ctrl_initgain_byrssi()
- *
- * Overview: Driver must monitor RSSI and notify firmware to change initial
- * gain according to different threshold. BB team provide the
- * suggested solution.
- *
- * Input: struct net_device *dev
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/27/2008 amy Create Version 0 porting from windows code.
- *---------------------------------------------------------------------------*/
+/*
+ * Driver must monitor RSSI and notify firmware to change initial
+ * gain according to different threshold. BB team provide the
+ * suggested solution.
+ */
static void dm_ctrl_initgain_byrssi(struct net_device *dev)
{
}
-
-/*-----------------------------------------------------------------------------
- * Function: dm_ctrl_initgain_byrssi_highpwr()
- *
- * Overview:
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/28/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
static void dm_ctrl_initgain_byrssi_highpwr(
struct net_device * dev)
{
-/*-----------------------------------------------------------------------------
- * Function: dm_check_rfctrl_gpio()
- *
- * Overview: Copy 8187B template for 9xseries.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/28/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/* Copy 8187B template for 9xseries */
#if 1
static void dm_check_rfctrl_gpio(struct net_device * dev)
{
}
#endif
-/*-----------------------------------------------------------------------------
- * Function: dm_check_pbc_gpio()
- *
- * Overview: Check if PBC button is pressed.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/28/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/* Check if PBC button is pressed. */
static void dm_check_pbc_gpio(struct net_device *dev)
{
#ifdef RTL8192U
#ifdef RTL8192E
-/*-----------------------------------------------------------------------------
- * Function: dm_GPIOChangeRF
- * Overview: PCI will not support workitem call back HW radio on-off control.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 02/21/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
+/* PCI will not support workitem call back HW radio on-off control. */
void dm_gpio_change_rf_callback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
- struct r8192_priv *priv = container_of(dwork,struct r8192_priv,gpio_change_rf_wq);
- struct net_device *dev = priv->ieee80211->dev;
+ struct r8192_priv *priv = container_of(dwork,struct r8192_priv,gpio_change_rf_wq);
+ struct net_device *dev = priv->ieee80211->dev;
u8 tmp1byte;
RT_RF_POWER_STATE eRfPowerStateToSet;
bool bActuallySet = false;
}
#endif
-/*-----------------------------------------------------------------------------
- * Function: DM_RFPathCheckWorkItemCallBack()
- *
- * Overview: Check if Current RF RX path is enabled
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 01/30/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
+
+/* Check if Current RF RX path is enabled */
void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work,struct delayed_work,work);
}
}
-/*-----------------------------------------------------------------------------
- * Function: dm_check_rx_path_selection()
- *
- * Overview: Call a workitem to check current RXRF path and Rx Path selection by RSSI.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/28/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void dm_check_rx_path_selection(struct net_device *dev)
+/*
+ * Call a workitem to check current RXRF path and Rx Path selection by RSSI.
+ */
+static void dm_check_rx_path_selection(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
queue_delayed_work(priv->priv_wq,&priv->rfpath_check_wq,0);
}
-
static void dm_init_fsync (struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
}
}
-/*---------------------------Define function prototype------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: DM_DynamicTxPower()
- *
- * Overview: Detect Signal strength to control TX Registry
- Tx Power Control For Near/Far Range
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 03/06/2008 Jacken Create Version 0.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * Detect Signal strength to control TX Registry
+ * Tx Power Control For Near/Far Range
+ */
static void dm_init_dynamic_txpower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
#include "r8192E_hw.h"
#include "r819xE_cmdpkt.h"
-/*-----------------------------------------------------------------------------
- * Function: cmpk_message_handle_tx()
- *
- * Overview: Driver internal module can call the API to send message to
- * firmware side. For example, you can send a debug command packet.
- * Or you can send a request for FW to modify RLX4181 LBUS HW bank.
- * Otherwise, you can change MAC/PHT/RF register by firmware at
- * run time. We do not support message more than one segment now.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/06/2008 amy porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * Driver internal module can call the API to send message to
+ * firmware side. For example, you can send a debug command packet.
+ * Or you can send a request for FW to modify RLX4181 LBUS HW bank.
+ * Otherwise, you can change MAC/PHT/RF register by firmware at
+ * run time. We do not support message more than one segment now.
+ */
RT_STATUS cmpk_message_handle_tx(
struct net_device *dev,
u8* code_virtual_address,
#endif
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_counttxstatistic()
- *
- * Overview:
- *
- * Input: PADAPTER pAdapter - .
- * CMPK_TXFB_T *psTx_FB - .
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void
+static void
cmpk_count_txstatistic(
struct net_device *dev,
cmpk_txfb_t *pstx_fb)
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_feedback()
- *
- * Overview: The function is responsible for extract the message inside TX
- * feedbck message from firmware. It will contain dedicated info in
- * ws-06-0063-rtl8190-command-packet-specification. Please
- * refer to chapter "TX Feedback Element". We have to read 20 bytes
- * in the command packet.
- *
- * Input: struct net_device * dev
- * u8 * pmsg - Msg Ptr of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/08/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-static void
+/*
+ * The function is responsible for extract the message inside TX
+ * feedbck message from firmware. It will contain dedicated info in
+ * ws-06-0063-rtl8190-command-packet-specification. Please
+ * refer to chapter "TX Feedback Element". We have to read 20 bytes
+ * in the command packet.
+ */
+static void
cmpk_handle_tx_feedback(
struct net_device *dev,
u8 * pmsg)
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_interrupt_status()
- *
- * Overview: The function is responsible for extract the message from
- * firmware. It will contain dedicated info in
- * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
- * Please refer to chapter "Interrupt Status Element".
- *
- * Input: struct net_device *dev,
- * u8* pmsg - Message Pointer of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Add this for rtl8192 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * The function is responsible for extract the message from
+ * firmware. It will contain dedicated info in
+ * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc.
+ * Please refer to chapter "Interrupt Status Element".
+ */
static void
cmpk_handle_interrupt_status(
struct net_device *dev,
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_query_config_rx()
- *
- * Overview: The function is responsible for extract the message from
- * firmware. It will contain dedicated info in
- * ws-06-0063-rtl8190-command-packet-specification. Please
- * refer to chapter "Beacon State Element".
- *
- * Input: u8 * pmsg - Message Pointer of the command packet.
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * The function is responsible for extract the message from
+ * firmware. It will contain dedicated info in
+ * ws-06-0063-rtl8190-command-packet-specification. Please
+ * refer to chapter "Beacon State Element".
+ */
static void
cmpk_handle_query_config_rx(
struct net_device *dev,
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_count_tx_status()
- *
- * Overview: Count aggregated tx status from firmwar of one type rx command
- * packet element id = RX_TX_STATUS.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * Count aggregated tx status from firmwar of one type rx command
+ * packet element id = RX_TX_STATUS.
+ */
static void cmpk_count_tx_status( struct net_device *dev,
cmpk_tx_status_t *pstx_status)
{
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_status()
- *
- * Overview: Firmware add a new tx feedback status to reduce rx command
- * packet buffer operation load.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * Firmware add a new tx feedback status to reduce rx command
+ * packet buffer operation load.
+ */
static void
cmpk_handle_tx_status(
struct net_device *dev,
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_handle_tx_rate_history()
- *
- * Overview: Firmware add a new tx rate history
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/12/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/* Firmware add a new tx rate history */
static void
cmpk_handle_tx_rate_history(
struct net_device *dev,
}
-/*-----------------------------------------------------------------------------
- * Function: cmpk_message_handle_rx()
- *
- * Overview: In the function, we will capture different RX command packet
- * info. Every RX command packet element has different message
- * length and meaning in content. We only support three type of RX
- * command packet now. Please refer to document
- * ws-06-0063-rtl8190-command-packet-specification.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/06/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
+/*
+ * In the function, we will capture different RX command packet
+ * info. Every RX command packet element has different message
+ * length and meaning in content. We only support three type of RX
+ * command packet now. Please refer to document
+ * ws-06-0063-rtl8190-command-packet-specification.
+ */
u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats *pstats)
{
// u32 debug_level = DBG_LOUD;
*
* Description: This routine will initialize firmware. If any error occurs
* during the initialization process, the routine shall terminate
- * immediately and return fail. NIC driver should call
- * NdisOpenFile only from MiniportInitialize.
- *
- * Arguments: The pointer of the adapter
- *
- * Returns:
- * NDIS_STATUS_FAILURE - the following initialization process
- * should be terminated
- * NDIS_STATUS_SUCCESS - if firmware initialization process
- * success
+ * immediately and return fail.
*/
#include "r8192E.h"
}
/*
- * Procedure: Check whether main code is download OK. If OK, turn on CPU
- *
- * Description: CPU register locates in different page against general
- * register. Switch to CPU register in the begin and switch
- * back before return
- *
- * Arguments: The pointer of the adapter
+ * Check whether main code is download OK. If OK, turn on CPU
*
- * Returns:
- * NDIS_STATUS_FAILURE - the following initialization process should be
- * terminated
- * NDIS_STATUS_SUCCESS - if firmware initialization process success
+ * CPU register locates in different page against general
+ * register. Switch to CPU register in the begin and switch
+ * back before return
*/
static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
{
projects / linux-2.6-microblaze.git / commitdiff