- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
Odroid XU3 Lite board.
- "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4.
+ - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1.
* Insignal
- "insignal,arndale" - for Exynos5250-based Insignal Arndale board.
- compatible: only "samsung,secure-firmware" is currently supported
- reg: address of non-secure SYSRAM used for communication with firmware
- firmware@0203F000 {
+ firmware@203F000 {
compatible = "samsung,secure-firmware";
reg = <0x0203F000 0x1000>;
};
- #dma-cells : Should be 1, a single cell holding a line request number
Example:
- dma: dma-controller@01c02000 {
+ dma: dma-controller@1c02000 {
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
interrupts = <0 50 4>;
#dma-cells = <1>;
};
+------------------------------------------------------------------------------
+For A64 DMA controller:
+
+Required properties:
+- compatible: "allwinner,sun50i-a64-dma"
+- dma-channels: Number of DMA channels supported by the controller.
+ Refer to Documentation/devicetree/bindings/dma/dma.txt
+- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells
+
+Optional properties:
+- dma-requests: Number of DMA request signals supported by the controller.
+ Refer to Documentation/devicetree/bindings/dma/dma.txt
+
+Example:
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <8>;
+ dma-requests = <27>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+------------------------------------------------------------------------------
+
Clients:
DMA clients connected to the A31 DMA controller must use the format
2. The port ID as specified in the datasheet
Example:
-spi2: spi@01c6a000 {
+spi2: spi@1c6a000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
interrupts = <0 67 4>;
allwinner Allwinner Technology Co., Ltd.
alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
+ amarula Amarula Solutions
amazon Amazon.com, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
delta Delta Electronics, Inc.
denx Denx Software Engineering
devantech Devantech, Ltd.
+dh DH electronics GmbH
digi Digi International Inc.
digilent Diglent, Inc.
dioo Dioo Microcircuit Co., Ltd
exar Exar Corporation
excito Excito
ezchip EZchip Semiconductor
+ fairphone Fairphone B.V.
faraday Faraday Technology Corporation
fcs Fairchild Semiconductor
firefly Firefly
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
hardkernel Hardkernel Co., Ltd
+hideep HiDeep Inc.
himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
meas Measurement Specialties
mediatek MediaTek Inc.
megachips MegaChips
+ mele Shenzhen MeLE Digital Technology Ltd.
melexis Melexis N.V.
melfas MELFAS Inc.
mellanox Mellanox Technologies
netron-dy Netron DY
netxeon Shenzhen Netxeon Technology CO., LTD
nexbox Nexbox
+nextthing Next Thing Co.
newhaven Newhaven Display International
ni National Instruments
nintendo Nintendo
nlt NLT Technologies, Ltd.
nokia Nokia
nordic Nordic Semiconductor
+nutsboard NutsBoard
nuvoton Nuvoton Technology Corporation
nvd New Vision Display
nvidia NVIDIA
onion Onion Corporation
onnn ON Semiconductor Corp.
ontat On Tat Industrial Company
+opalkelly Opal Kelly Incorporated
opencores OpenCores.org
+openrisc OpenRISC.io
option Option NV
ORCL Oracle Corporation
+orisetech Orise Technology
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
oxsemi Oxford Semiconductor, Ltd.
plda PLDA
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
+ probox2 PROBOX2 (by W2COMP Co., Ltd.)
pulsedlight PulsedLight, Inc
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
sff Small Form Factor Committee
sgx SGX Sensortech
sharp Sharp Corporation
+shimafuji Shimafuji Electric, Inc.
si-en Si-En Technology Ltd.
sigma Sigma Designs, Inc.
sii Seiko Instruments, Inc.
sony Sony Corporation
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
+sst Silicon Storage Technology, Inc.
st STMicroelectronics
starry Starry Electronic Technology (ShenZhen) Co., LTD
startek Startek
syna Synaptics Inc.
synology Synology, Inc.
tbs TBS Technologies
+ tbs-biometrics Touchless Biometric Systems AG
tcg Trusted Computing Group
tcl Toby Churchill Ltd.
technexion TechNexion
ti Texas Instruments
tianma Tianma Micro-electronics Co., Ltd.
tlm Trusted Logic Mobility
+tmt Tecon Microprocessor Technologies, LLC.
topeet Topeet
toradex Toradex AG
toshiba Toshiba Corporation
tsd Theobroma Systems Design und Consulting GmbH
tyan Tyan Computer Corporation
ucrobotics uCRobotics
+ ubnt Ubiquiti Networks
udoo Udoo
uniwest United Western Technologies Corp (UniWest)
upisemi uPI Semiconductor Corp.
S: Supported
F: drivers/input/misc/adxl34x.c
-AEDSP16 DRIVER
-M: Riccardo Facchetti <fizban@tin.it>
-S: Maintained
-F: sound/oss/aedsp16.c
-
AF9013 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
L: linux-media@vger.kernel.org
F: include/linux/altera_jtaguart.h
AMAZON ETHERNET DRIVERS
-M: Netanel Belgazal <netanel@annapurnalabs.com>
-R: Saeed Bishara <saeed@annapurnalabs.com>
-R: Zorik Machulsky <zorik@annapurnalabs.com>
+M: Netanel Belgazal <netanel@amazon.com>
+R: Saeed Bishara <saeedb@amazon.com>
+R: Zorik Machulsky <zorik@amazon.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/ena.txt
F: drivers/gpu/drm/amd/include/cik_structs.h
F: drivers/gpu/drm/amd/include/kgd_kfd_interface.h
F: drivers/gpu/drm/amd/include/vi_structs.h
-F: drivers/gpu/drm/radeon/radeon_kfd.c
-F: drivers/gpu/drm/radeon/radeon_kfd.h
F: include/uapi/linux/kfd_ioctl.h
AMD SEATTLE DEVICE TREE SUPPORT
F: drivers/staging/android/
ANDROID GOLDFISH RTC DRIVER
-M: Miodrag Dinic <miodrag.dinic@imgtec.com>
+M: Miodrag Dinic <miodrag.dinic@mips.com>
S: Supported
F: Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
F: drivers/rtc/rtc-goldfish.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
F: arch/arm64/boot/dts/renesas/
+ F: Documentation/devicetree/bindings/arm/shmobile.txt
F: drivers/soc/renesas/
F: include/linux/soc/renesas/
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
+ F: Documentation/devicetree/bindings/arm/shmobile.txt
F: drivers/soc/renesas/
F: include/linux/soc/renesas/
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/TEGRA HDMI CEC SUBSYSTEM SUPPORT
+M: Hans Verkuil <hans.verkuil@cisco.com>
+L: linux-tegra@vger.kernel.org
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/platform/tegra-cec/
+F: Documentation/devicetree/bindings/media/tegra-cec.txt
+
ARM/TETON BGA MACHINE SUPPORT
M: "Mark F. Brown" <mark.brown314@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
S: Maintained
+F: Documentation/devicetree/bindings/gpio/gpio-uniphier.txt
F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
F: arch/arm64/boot/dts/socionext/
F: drivers/bus/uniphier-system-bus.c
F: drivers/clk/uniphier/
+F: drivers/gpio/gpio-uniphier.c
F: drivers/i2c/busses/i2c-uniphier*
F: drivers/irqchip/irq-uniphier-aidet.c
F: drivers/pinctrl/uniphier/
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
-R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git https://github.com/Xilinx/linux-xlnx.git
F: include/linux/async_tx.h
AT24 EEPROM DRIVER
-M: Wolfram Sang <wsa@the-dreams.de>
+M: Bartosz Golaszewski <brgl@bgdev.pl>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/misc/eeprom/at24.c
F: drivers/net/hamradio/baycom*
BCACHE (BLOCK LAYER CACHE)
+M: Michael Lyle <mlyle@lyle.org>
M: Kent Overstreet <kent.overstreet@gmail.com>
L: linux-bcache@vger.kernel.org
W: http://bcache.evilpiepirate.org
-S: Orphan
+C: irc://irc.oftc.net/bcache
+S: Maintained
F: drivers/md/bcache/
BDISP ST MEDIA DRIVER
S: Supported
F: arch/x86/net/bpf_jit*
F: Documentation/networking/filter.txt
+F: Documentation/bpf/
F: include/linux/bpf*
F: include/linux/filter.h
F: include/uapi/linux/bpf*
F: net/sched/act_bpf.c
F: net/sched/cls_bpf.c
F: samples/bpf/
-F: tools/net/bpf*
+F: tools/bpf/
F: tools/testing/selftests/bpf/
BROADCOM B44 10/100 ETHERNET DRIVER
F: drivers/gpio/gpio-brcmstb.c
F: Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
+M: Al Cooper <alcooperx@gmail.com>
+L: linux-kernel@vger.kernel.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: drivers/phy/broadcom/phy-brcm-usb*
+
BROADCOM GENET ETHERNET DRIVER
+M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
S: Supported
N: bcm585*
N: bcm586*
N: bcm88312
+N: hr2
F: arch/arm64/boot/dts/broadcom/ns2*
F: drivers/clk/bcm/clk-ns*
F: drivers/pinctrl/bcm/pinctrl-ns*
CA8210 IEEE-802.15.4 RADIO DRIVER
M: Harry Morris <h.morris@cascoda.com>
-M: linuxdev@cascoda.com
L: linux-wpan@vger.kernel.org
W: https://github.com/Cascoda/ca8210-linux.git
S: Maintained
F: include/uapi/linux/cec-funcs.h
F: Documentation/devicetree/bindings/media/cec.txt
+CEC GPIO DRIVER
+M: Hans Verkuil <hans.verkuil@cisco.com>
+L: linux-media@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+W: http://linuxtv.org
+S: Supported
+F: drivers/media/platform/cec-gpio/
+F: Documentation/devicetree/bindings/media/cec-gpio.txt
+
CELL BROADBAND ENGINE ARCHITECTURE
M: Arnd Bergmann <arnd@arndb.de>
L: linuxppc-dev@lists.ozlabs.org
F: drivers/auxdisplay/cfag12864bfb.c
F: include/linux/cfag12864b.h
-CFG80211 and NL80211
+802.11 (including CFG80211/NL80211)
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
+F: net/wireless/
F: include/uapi/linux/nl80211.h
+F: include/linux/ieee80211.h
+F: include/net/wext.h
F: include/net/cfg80211.h
-F: net/wireless/*
-X: net/wireless/wext*
+F: include/net/iw_handler.h
+F: include/net/ieee80211_radiotap.h
+F: Documentation/driver-api/80211/cfg80211.rst
+F: Documentation/networking/regulatory.txt
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
CISCO VIC ETHERNET NIC DRIVER
M: Christian Benvenuti <benve@cisco.com>
M: Govindarajulu Varadarajan <_govind@gmx.com>
-M: Neel Patel <neepatel@cisco.com>
+M: Parvi Kaustubhi <pkaustub@cisco.com>
S: Supported
F: drivers/net/ethernet/cisco/enic/
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
S: Supported
-F: drivers/clocksource
+F: drivers/clocksource/
+F: Documentation/devicetree/bindings/timer/
CMPC ACPI DRIVER
M: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
M: Julia Lawall <Julia.Lawall@lip6.fr>
M: Gilles Muller <Gilles.Muller@lip6.fr>
M: Nicolas Palix <nicolas.palix@imag.fr>
-M: Michal Marek <mmarek@suse.com>
+M: Michal Marek <michal.lkml@markovi.net>
L: cocci@systeme.lip6.fr (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
W: http://coccinelle.lip6.fr/
S: Maintained
F: Documentation/cgroup-v1/cpusets.txt
F: include/linux/cpuset.h
-F: kernel/cpuset.c
+F: kernel/cgroup/cpuset.c
CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
M: Johannes Weiner <hannes@cmpxchg.org>
CPU POWER MONITORING SUBSYSTEM
M: Thomas Renninger <trenn@suse.com>
+M: Shuah Khan <shuahkh@osg.samsung.com>
+M: Shuah Khan <shuah@kernel.org>
L: linux-pm@vger.kernel.org
S: Maintained
F: tools/power/cpupower/
T: quilt http://people.redhat.com/agk/patches/linux/editing/
S: Maintained
F: Documentation/device-mapper/
+F: drivers/md/Makefile
+F: drivers/md/Kconfig
F: drivers/md/dm*
F: drivers/md/persistent-data/
F: include/linux/device-mapper.h
F: Documentation/devicetree/bindings/input/da90??-onkey.txt
F: Documentation/devicetree/bindings/thermal/da90??-thermal.txt
F: Documentation/devicetree/bindings/regulator/da92*.txt
-F: Documentation/devicetree/bindings/watchdog/da92??-wdt.txt
+F: Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
F: Documentation/devicetree/bindings/sound/da[79]*.txt
F: drivers/gpio/gpio-da90??.c
F: drivers/hwmon/da90??-hwmon.c
F: drivers/dma/
F: include/linux/dmaengine.h
F: Documentation/devicetree/bindings/dma/
-F: Documentation/dmaengine/
+F: Documentation/driver-api/dmaengine/
T: git git://git.infradead.org/users/vkoul/slave-dma.git
DMA MAPPING HELPERS
S: Maintained
F: drivers/gpu/drm/bochs/
+DRM DRIVER FOR FARADAY TVE200 TV ENCODER
+M: Linus Walleij <linus.walleij@linaro.org>
+T: git git://anongit.freedesktop.org/drm/drm-misc
+S: Maintained
+F: drivers/gpu/drm/tve200/
+
DRM DRIVER FOR INTEL I810 VIDEO CARDS
S: Orphan / Obsolete
F: drivers/gpu/drm/i810/
S: Supported
F: drivers/gpu/drm/sun4i/
F: Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git
+T: git git://anongit.freedesktop.org/drm/drm-misc
DRM DRIVERS FOR AMLOGIC SOCS
M: Neil Armstrong <narmstrong@baylibre.com>
DRM PANEL DRIVERS
M: Thierry Reding <thierry.reding@gmail.com>
L: dri-devel@lists.freedesktop.org
-T: git git://anongit.freedesktop.org/tegra/linux.git
+T: git git://anongit.freedesktop.org/drm/drm-misc
S: Maintained
F: drivers/gpu/drm/drm_panel.c
F: drivers/gpu/drm/panel/
S: Maintained
F: drivers/edac/highbank*
-EDAC-CAVIUM
+EDAC-CAVIUM OCTEON
M: Ralf Baechle <ralf@linux-mips.org>
M: David Daney <david.daney@cavium.com>
L: linux-edac@vger.kernel.org
L: linux-mips@linux-mips.org
S: Supported
F: drivers/edac/octeon_edac*
+
+EDAC-CAVIUM THUNDERX
+M: David Daney <david.daney@cavium.com>
+M: Jan Glauber <jglauber@cavium.com>
+L: linux-edac@vger.kernel.org
+S: Supported
F: drivers/edac/thunderx_edac*
EDAC-CORE
Extended Verification Module (EVM)
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
-L: linux-ima-devel@lists.sourceforge.net
-L: linux-security-module@vger.kernel.org
+L: linux-integrity@vger.kernel.org
S: Supported
F: security/integrity/evm/
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: include/linux/fcntl.h
-F: include/linux/fs.h
F: include/uapi/linux/fcntl.h
-F: include/uapi/linux/fs.h
F: fs/fcntl.c
F: fs/locks.c
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: fs/*
+F: include/linux/fs.h
+F: include/uapi/linux/fs.h
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: Riku Voipio <riku.voipio@iki.fi>
FPGA MANAGER FRAMEWORK
M: Alan Tull <atull@kernel.org>
-R: Moritz Fischer <mdf@kernel.org>
+M: Moritz Fischer <mdf@kernel.org>
L: linux-fpga@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
FRAMEBUFFER LAYER
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+L: dri-devel@lists.freedesktop.org
L: linux-fbdev@vger.kernel.org
T: git git://github.com/bzolnier/linux.git
Q: http://patchwork.kernel.org/project/linux-fbdev/list/
FREESCALE CAAM (Cryptographic Acceleration and Assurance Module) DRIVER
M: Horia Geantă <horia.geanta@nxp.com>
-M: Dan Douglass <dan.douglass@nxp.com>
+M: Aymen Sghaier <aymen.sghaier@nxp.com>
L: linux-crypto@vger.kernel.org
S: Maintained
F: drivers/crypto/caam/
S: Supported
F: fs/crypto/
F: include/linux/fscrypt*.h
+F: Documentation/filesystems/fscrypt.rst
FUJITSU FR-V (FRV) PORT
S: Orphan
F: drivers/net/ethernet/hisilicon/
F: Documentation/devicetree/bindings/net/hisilicon*.txt
+HISILICON PMU DRIVER
+M: Shaokun Zhang <zhangshaokun@hisilicon.com>
+W: http://www.hisilicon.com
+S: Supported
+F: drivers/perf/hisilicon
+F: Documentation/perf/hisi-pmu.txt
+
HISILICON ROCE DRIVER
M: Lijun Ou <oulijun@huawei.com>
M: Wei Hu(Xavier) <xavier.huwei@huawei.com>
F: Documentation/networking/ieee802154.txt
IFE PROTOCOL
-M: Yotam Gigi <yotamg@mellanox.com>
+M: Yotam Gigi <yotam.gi@gmail.com>
M: Jamal Hadi Salim <jhs@mojatatu.com>
F: net/ife
F: include/net/ife.h
F: drivers/usb/atm/ueagle-atm.c
IMGTEC ASCII LCD DRIVER
-M: Paul Burton <paul.burton@imgtec.com>
+M: Paul Burton <paul.burton@mips.com>
S: Maintained
F: Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
F: drivers/auxdisplay/img-ascii-lcd.c
INFINIBAND SUBSYSTEM
M: Doug Ledford <dledford@redhat.com>
-M: Sean Hefty <sean.hefty@intel.com>
-M: Hal Rosenstock <hal.rosenstock@gmail.com>
L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org/
Q: http://patchwork.kernel.org/project/linux-rdma/list/
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
M: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
-L: linux-ima-devel@lists.sourceforge.net
-L: linux-ima-user@lists.sourceforge.net
-L: linux-security-module@vger.kernel.org
+L: linux-integrity@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity.git
S: Supported
F: security/integrity/ima/
F: scripts/Makefile.kasan
KCONFIG
-M: "Yann E. MORIN" <yann.morin.1998@free.fr>
L: linux-kbuild@vger.kernel.org
-T: git git://gitorious.org/linux-kconfig/linux-kconfig
-S: Maintained
+S: Orphan
F: Documentation/kbuild/kconfig-language.txt
F: scripts/kconfig/
KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
M: Masahiro Yamada <yamada.masahiro@socionext.com>
-M: Michal Marek <mmarek@suse.com>
+M: Michal Marek <michal.lkml@markovi.net>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
L: linux-kbuild@vger.kernel.org
S: Maintained
F: arch/mips/kvm/
KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
-M: Alexander Graf <agraf@suse.com>
+M: Paul Mackerras <paulus@ozlabs.org>
L: kvm-ppc@vger.kernel.org
W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
F: arch/x86/kvm/
F: arch/x86/include/uapi/asm/kvm*
F: arch/x86/include/asm/kvm*
+F: arch/x86/include/asm/pvclock-abi.h
F: arch/x86/kernel/kvm.c
F: arch/x86/kernel/kvmclock.c
KEYS-ENCRYPTED
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
-M: David Safford <safford@us.ibm.com>
-L: linux-security-module@vger.kernel.org
+L: linux-integrity@vger.kernel.org
L: keyrings@vger.kernel.org
S: Supported
F: Documentation/security/keys/trusted-encrypted.rst
F: security/keys/encrypted-keys/
KEYS-TRUSTED
-M: David Safford <safford@us.ibm.com>
M: Mimi Zohar <zohar@linux.vnet.ibm.com>
-L: linux-security-module@vger.kernel.org
+L: linux-integrity@vger.kernel.org
L: keyrings@vger.kernel.org
S: Supported
F: Documentation/security/keys/trusted-encrypted.rst
F: include/linux/kgdb.h
F: kernel/debug/
-KMEMCHECK
-M: Vegard Nossum <vegardno@ifi.uio.no>
-M: Pekka Enberg <penberg@kernel.org>
-S: Maintained
-F: Documentation/dev-tools/kmemcheck.rst
-F: arch/x86/include/asm/kmemcheck.h
-F: arch/x86/mm/kmemcheck/
-F: include/linux/kmemcheck.h
-F: mm/kmemcheck.c
-
KMEMLEAK
M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
F: Documentation/scsi/53c700.txt
F: drivers/scsi/53c700*
+LEAKING_ADDRESSES
+M: Tobin C. Harding <me@tobin.cc>
+S: Maintained
+F: scripts/leaking_addresses.pl
+
LED SUBSYSTEM
M: Richard Purdie <rpurdie@rpsys.net>
M: Jacek Anaszewski <jacek.anaszewski@gmail.com>
F: include/net/mac80211.h
F: net/mac80211/
F: drivers/net/wireless/mac80211_hwsim.[ch]
+F: Documentation/networking/mac80211_hwsim/README
MAILBOX API
M: Jassi Brar <jassisinghbrar@gmail.com>
F: drivers/net/ethernet/mellanox/mlxsw/
MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
-M: Yotam Gigi <yotamg@mellanox.com>
+M: mlxsw@mellanox.com
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
F: arch/mips/
MIPS BOSTON DEVELOPMENT BOARD
-M: Paul Burton <paul.burton@imgtec.com>
+M: Paul Burton <paul.burton@mips.com>
L: linux-mips@linux-mips.org
S: Maintained
F: Documentation/devicetree/bindings/clock/img,boston-clock.txt
F: include/dt-bindings/clock/boston-clock.h
MIPS GENERIC PLATFORM
-M: Paul Burton <paul.burton@imgtec.com>
+M: Paul Burton <paul.burton@mips.com>
L: linux-mips@linux-mips.org
S: Supported
F: arch/mips/generic/
F: drivers/*/*/*loongson1*
MIPS RINT INSTRUCTION EMULATION
-M: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
+M: Aleksandar Markovic <aleksandar.markovic@mips.com>
L: linux-mips@linux-mips.org
S: Supported
F: arch/mips/math-emu/sp_rint.c
F: include/linux/mux/
F: drivers/mux/
-MULTISOUND SOUND DRIVER
-M: Andrew Veliath <andrewtv@usa.net>
-S: Maintained
-F: Documentation/sound/oss/MultiSound
-F: sound/oss/msnd*
-
MULTITECH MULTIPORT CARD (ISICOM)
S: Orphan
F: drivers/tty/isicom.c
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/musb/
S: Maintained
F: net/dsa/
F: include/net/dsa.h
+F: include/linux/dsa/
F: drivers/net/dsa/
NETWORKING [GENERAL]
F: include/uapi/linux/net.h
F: include/uapi/linux/netdevice.h
F: include/uapi/linux/net_namespace.h
-F: tools/net/
F: tools/testing/selftests/net/
+F: lib/net_utils.c
F: lib/random32.c
NETWORKING [IPSEC]
L: openrisc@lists.librecores.org
W: http://openrisc.io
S: Maintained
+F: Documentation/devicetree/bindings/openrisc/
+F: Documentation/openrisc/
F: arch/openrisc/
+F: drivers/irqchip/irq-ompic.c
+F: drivers/irqchip/irq-or1k-*
OPENVSWITCH
M: Pravin Shelar <pshelar@nicira.com>
L: linux-pm@vger.kernel.org
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
-F: drivers/base/power/opp/
+F: drivers/opp/
F: include/linux/pm_opp.h
F: Documentation/power/opp.txt
F: Documentation/devicetree/bindings/opp/
PARAVIRT_OPS INTERFACE
M: Juergen Gross <jgross@suse.com>
-M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
L: virtualization@lists.linux-foundation.org
PCI DRIVER FOR MICROSEMI SWITCHTEC
M: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
-M: Stephen Bates <stephen.bates@microsemi.com>
M: Logan Gunthorpe <logang@deltatee.com>
L: linux-pci@vger.kernel.org
S: Maintained
PCI ENDPOINT SUBSYSTEM
M: Kishon Vijay Abraham I <kishon@ti.com>
+M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
L: linux-pci@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
S: Supported
F: arch/x86/pci/
F: arch/x86/kernel/quirks.c
+PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
+M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+L: linux-pci@vger.kernel.org
+Q: http://patchwork.ozlabs.org/project/linux-pci/list/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
+S: Supported
+F: drivers/pci/host/
+F: drivers/pci/dwc/
+
PCIE DRIVER FOR AXIS ARTPEC
M: Niklas Cassel <niklas.cassel@axis.com>
M: Jesper Nilsson <jesper.nilsson@axis.com>
PCIE DRIVER FOR HISILICON
M: Zhou Wang <wangzhou1@hisilicon.com>
-M: Gabriele Paoloni <gabriele.paoloni@huawei.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
F: Documentation/devicetree/bindings/pci/pcie-kirin.txt
F: drivers/pci/dwc/pcie-kirin.c
+PCIE DRIVER FOR HISILICON STB
+M: Jianguo Sun <sunjianguo1@huawei.com>
+M: Shawn Guo <shawn.guo@linaro.org>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
+F: drivers/pci/dwc/pcie-histb.c
+
PCIE DRIVER FOR MEDIATEK
M: Ryder Lee <ryder.lee@mediatek.com>
L: linux-pci@vger.kernel.org
F: Documentation/devicetree/bindings/pci/rockchip-pcie.txt
F: drivers/pci/host/pcie-rockchip.c
+PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-pci@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
+F: drivers/pci/host/pci-v3-semi.c
+
PCIE DRIVER FOR ST SPEAR13XX
M: Pratyush Anand <pratyush.anand@gmail.com>
L: linux-pci@vger.kernel.org
M: Ingo Molnar <mingo@redhat.com>
M: Arnaldo Carvalho de Melo <acme@kernel.org>
R: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+R: Jiri Olsa <jolsa@redhat.com>
+R: Namhyung Kim <namhyung@kernel.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
M: Geert Uytterhoeven <geert+renesas@glider.be>
L: linux-renesas-soc@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git sh-pfc
S: Maintained
F: drivers/pinctrl/sh-pfc/
F: drivers/pinctrl/spear/
PISTACHIO SOC SUPPORT
-M: James Hartley <james.hartley@imgtec.com>
-M: Ionela Voinescu <ionela.voinescu@imgtec.com>
+M: James Hartley <james.hartley@sondrel.com>
L: linux-mips@linux-mips.org
-S: Maintained
+S: Odd Fixes
F: arch/mips/pistachio/
F: arch/mips/include/asm/mach-pistachio/
F: arch/mips/boot/dts/img/pistachio*
F: drivers/block/ps3vram.c
PSAMPLE PACKET SAMPLING SUPPORT:
-M: Yotam Gigi <yotamg@mellanox.com>
+M: Yotam Gigi <yotam.gi@gmail.com>
S: Maintained
F: net/psample
F: include/net/psample.h
QAT DRIVER
M: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
-M: Salvatore Benedetto <salvatore.benedetto@intel.com>
L: qat-linux@intel.com
S: Supported
F: drivers/crypto/qat/
QLOGIC QL4xxx RDMA DRIVER
M: Ram Amrani <Ram.Amrani@cavium.com>
+M: Michal Kalderon <Michal.Kalderon@cavium.com>
M: Ariel Elior <Ariel.Elior@cavium.com>
L: linux-rdma@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
+F: Documentation/ABI/stable/sysfs-class-rfkill
F: net/rfkill/
RHASHTABLE
F: drivers/mtd/nand/r852.c
F: drivers/mtd/nand/r852.h
+RISC-V ARCHITECTURE
+M: Palmer Dabbelt <palmer@sifive.com>
+M: Albert Ou <albert@sifive.com>
+L: patches@groups.riscv.org
+T: git https://github.com/riscv/riscv-linux
+S: Supported
+F: arch/riscv/
+K: riscv
+N: riscv
+
ROCCAT DRIVERS
M: Stefan Achatz <erazor_de@users.sourceforge.net>
W: http://sourceforge.net/projects/roccat/
F: include/linux/hid-roccat*
F: Documentation/ABI/*/sysfs-driver-hid-roccat*
+ROCKCHIP RASTER 2D GRAPHIC ACCELERATION UNIT DRIVER
+M: Jacob chen <jacob2.chen@rock-chips.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/media/platform/rockchip/rga/
+F: Documentation/devicetree/bindings/media/rockchip-rga.txt
+
ROCKER DRIVER
M: Jiri Pirko <jiri@resnulli.us>
L: netdev@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/crypto/exynos-rng.c
-F: Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
+F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt
SAMSUNG FRAMEBUFFER DRIVER
M: Jingoo Han <jingoohan1@gmail.com>
S: Maintained
F: drivers/mmc/host/sdhci-spear.c
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) TI OMAP DRIVER
+M: Kishon Vijay Abraham I <kishon@ti.com>
+L: linux-mmc@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/sdhci-omap.c
+
SECURE ENCRYPTING DEVICE (SED) OPAL DRIVER
M: Scott Bauer <scott.bauer@intel.com>
M: Jonathan Derrick <jonathan.derrick@intel.com>
-M: Rafael Antognolli <rafael.antognolli@intel.com>
L: linux-block@vger.kernel.org
S: Supported
F: block/sed*
L: linux-raid@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shli/md.git
S: Supported
-F: drivers/md/
+F: drivers/md/Makefile
+F: drivers/md/Kconfig
+F: drivers/md/md*
+F: drivers/md/raid*
F: include/linux/raid/
F: include/uapi/linux/raid/
S: Supported
F: Documentation/process/stable-kernel-rules.rst
+STAGING - ATOMISP DRIVER
+M: Alan Cox <alan@linux.intel.com>
+M: Sakari Ailus <sakari.ailus@linux.intel.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: drivers/staging/media/atomisp/
+
STAGING - COMEDI
M: Ian Abbott <abbotti@mev.co.uk>
M: H Hartley Sweeten <hsweeten@visionengravers.com>
F: arch/arc/boot/dts/ax*
F: Documentation/devicetree/bindings/arc/axs10*
+SYNOPSYS DESIGNWARE APB GPIO DRIVER
+M: Hoan Tran <hotran@apm.com>
+L: linux-gpio@vger.kernel.org
+S: Maintained
+F: drivers/gpio/gpio-dwapb.c
+F: Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt
+
SYNOPSYS DESIGNWARE DMAC DRIVER
M: Viresh Kumar <vireshk@kernel.org>
-
M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: include/linux/dma/dw.h
F: include/linux/platform_data/dma-dw.h
M: Michael Jamet <michael.jamet@intel.com>
M: Mika Westerberg <mika.westerberg@linux.intel.com>
M: Yehezkel Bernat <yehezkel.bernat@intel.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
S: Maintained
F: drivers/thunderbolt/
+F: include/linux/thunderbolt.h
+
+THUNDERBOLT NETWORK DRIVER
+M: Michael Jamet <michael.jamet@intel.com>
+M: Mika Westerberg <mika.westerberg@linux.intel.com>
+M: Yehezkel Bernat <yehezkel.bernat@intel.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/thunderbolt.c
THUNDERX GPIO DRIVER
M: David Daney <david.daney@cavium.com>
TPM DEVICE DRIVER
M: Peter Huewe <peterhuewe@gmx.de>
-M: Marcel Selhorst <tpmdd@selhorst.net>
M: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
R: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
-W: http://tpmdd.sourceforge.net
-L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
-Q: https://patchwork.kernel.org/project/tpmdd-devel/list/
+L: linux-integrity@vger.kernel.org
+Q: https://patchwork.kernel.org/project/linux-integrity/list/
T: git git://git.infradead.org/users/jjs/linux-tpmdd.git
S: Maintained
F: drivers/char/tpm/
-TPM IBM_VTPM DEVICE DRIVER
-M: Ashley Lai <ashleydlai@gmail.com>
-W: http://tpmdd.sourceforge.net
-L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
-S: Maintained
-F: drivers/char/tpm/tpm_ibmvtpm*
-
TRACING
M: Steven Rostedt <rostedt@goodmis.org>
M: Ingo Molnar <mingo@redhat.com>
M: Bastien Nocera <hadess@hadess.net>
L: linux-input@vger.kernel.org
S: Maintained
-F: drivers/hid/hid-udraw.c
+F: drivers/hid/hid-udraw-ps3.c
UFS FILESYSTEM
M: Evgeniy Dushistov <dushistov@mail.ru>
F: include/linux/virtio_vsock.h
F: include/uapi/linux/virtio_vsock.h
F: include/uapi/linux/vsockmon.h
+F: include/uapi/linux/vm_sockets_diag.h
+F: net/vmw_vsock/diag.c
F: net/vmw_vsock/af_vsock_tap.c
F: net/vmw_vsock/virtio_transport_common.c
F: net/vmw_vsock/virtio_transport.c
F: drivers/net/vsockmon.c
F: drivers/vhost/vsock.c
F: drivers/vhost/vsock.h
+F: tools/testing/vsock/
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit@kernel.org>
L: kvm@vger.kernel.org
S: Supported
F: drivers/s390/virtio/
+F: arch/s390/include/uapi/asm/virtio-ccw.h
VIRTIO GPU DRIVER
M: David Airlie <airlied@linux.ie>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
F: Documentation/driver-api/vme.rst
F: drivers/staging/vme/
F: drivers/vme/
S: Supported
W: http://wireless.kernel.org/en/users/Drivers/wil6210
F: drivers/net/wireless/ath/wil6210/
-F: include/uapi/linux/wil6210_uapi.h
WIMAX STACK
M: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
F: Documentation/devicetree/bindings/mfd/arizona.txt
F: Documentation/devicetree/bindings/mfd/wm831x.txt
+F: Documentation/devicetree/bindings/sound/wlf,arizona.txt
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
F: drivers/*/xen-*front.c
F: drivers/xen/
F: arch/x86/include/asm/xen/
+F: arch/x86/include/asm/pvclock-abi.h
F: include/xen/
F: include/uapi/xen/
F: Documentation/ABI/stable/sysfs-hypervisor-xen
+# SPDX-License-Identifier: GPL-2.0
ifeq ($(CONFIG_OF),y)
dtb-$(CONFIG_ARCH_ALPINE) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
bcm94708.dtb \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
+ bcm47189-luxul-xap-1440.dtb \
+ bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm911360k.dtb \
bcm958300k.dtb \
bcm958305k.dtb
+ dtb-$(CONFIG_ARCH_BCM_HR2) += \
+ bcm53340-ubnt-unifi-switch8.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
- imx51-ts4800.dtb
+ imx51-ts4800.dtb \
+ imx51-zii-rdu1.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-cx9020.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
+ imx53-ppd.dtb \
imx53-qsb.dtb \
imx53-qsrb.dtb \
imx53-smd.dtb \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
+ imx6dl-tx6s-8034-mb7.dtb \
imx6dl-tx6s-8035.dtb \
+ imx6dl-tx6s-8035-mb7.dtb \
imx6dl-tx6u-801x.dtb \
+ imx6dl-tx6u-80xx-mb7.dtb \
imx6dl-tx6u-8033.dtb \
+ imx6dl-tx6u-8033-mb7.dtb \
imx6dl-tx6u-811x.dtb \
imx6dl-tx6u-81xx-mb7.dtb \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
+ imx6dl-wandboard-revd1.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apalis-ixora-v1.1.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
+ imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-evi.dtb \
imx6q-gk802.dtb \
imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
+ imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1036.dtb \
+ imx6q-tx6q-1036-mb7.dtb \
+ imx6q-tx6q-10x0-mb7.dtb \
imx6q-tx6q-1110.dtb \
imx6q-tx6q-11x0-mb7.dtb \
imx6q-udoo.dtb \
imx6q-utilite-pro.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
+ imx6q-wandboard-revd1.dtb \
imx6q-zii-rdu2.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
+ imx6qp-tx6qp-8037.dtb \
+ imx6qp-tx6qp-8037-mb7.dtb \
+ imx6qp-tx6qp-8137.dtb \
+ imx6qp-tx6qp-8137-mb7.dtb \
+ imx6qp-wandboard-revd1.dtb \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
imx6sx-sdb.dtb \
+ imx6sx-softing-vining-2000.dtb \
imx6sx-udoo-neo-basic.dtb \
imx6sx-udoo-neo-extended.dtb \
imx6sx-udoo-neo-full.dtb
orion5x-netgear-wnr854t.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += \
+ owl-s500-cubieboard6.dtb \
owl-s500-guitar-bb-rev-b.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
+ qcom-msm8974-fairphone-fp2.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7743-iwg20d-q7.dtb \
+ r8a7743-iwg20d-q7-dbcm-ca.dtb \
r8a7743-sk-rzg1m.dtb \
+ r8a7745-iwg22d-sodimm.dtb \
r8a7745-sk-rzg1e.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
rk3288-veyron-mickey.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
- rk3288-veyron-speedy.dtb
+ rk3288-veyron-speedy.dtb \
+ rk3288-vyasa.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += \
s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
+ sun7i-a20-olinuxino-micro-emmc.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-bananapi-m3.dtb \
sun8i-a83t-cubietruck-plus.dtb \
+ sun8i-a83t-tbs-a711.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-beelink-x2.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-parrot.dtb \
+ sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-v3s-licheepi-zero.dtb \
- sun8i-v3s-licheepi-zero-dock.dtb
+ sun8i-v3s-licheepi-zero-dock.dtb \
+ sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
aspeed-bmc-opp-romulus.dtb \
aspeed-ast2500-evb.dtb
endif
-
-dtstree := $(srctree)/$(src)
-dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
-
-always := $(dtb-y)
-clean-files := *.dtb
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "aspeed-g5.dtsi"
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
+
+ &i2c3 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+
+ &i2c7 {
+ status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+ };
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "aspeed-g4.dtsi"
model = "Palmetto BMC";
compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
- aliases {
- serial4 = &uart5;
- };
-
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+
+ &i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds3231";
+ reg = <0x68>;
+ };
+ };
+
+ &i2c1 {
+ status = "okay";
+ };
+
+ &i2c2 {
+ status = "okay";
+
+ tmp423@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+ };
+
+ &i2c3 {
+ status = "okay";
+ };
+
+ &i2c4 {
+ status = "okay";
+ };
+
+ &i2c5 {
+ status = "okay";
+ };
+
+ &i2c6 {
+ status = "okay";
+ };
+
+ &i2c7 {
+ status = "okay";
+ };
+
+ &vuart {
+ status = "okay";
+ };
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "aspeed-g5.dtsi"
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
+
+ &i2c2 {
+ status = "okay";
+ };
+
+ &i2c3 {
+ status = "okay";
+ };
+
+ &i2c4 {
+ status = "okay";
+ };
+
+ &i2c5 {
+ status = "okay";
+ };
+
+ &i2c6 {
+ /* PCIe slot 1 (x8) */
+ status = "okay";
+ };
+
+ &i2c7 {
+ /* PCIe slot 2 (x16) */
+ status = "okay";
+ };
+
+ &i2c8 {
+ /* PCIe slot 3 (x16) */
+ status = "okay";
+ };
+
+ &i2c9 {
+ /* PCIe slot 4 (x16) */
+ status = "okay";
+ };
+
+ &i2c10 {
+ /* PCIe slot 5 (x8) */
+ status = "okay";
+ };
+
+ &i2c11 {
+ status = "okay";
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+ };
+
+ &i2c12 {
+ status = "okay";
+ };
+
+ &vuart {
+ status = "okay";
+ };
+// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
/ {
#size-cells = <1>;
interrupt-parent = <&vic>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &vuart;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <192000000>;
};
- clk_apb: clk_apb@08 {
+ clk_apb: clk_apb@8 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock", "fixed-clock";
reg = <0x08>;
pinctrl: pinctrl {
compatible = "aspeed,g4-pinctrl";
-
- pinctrl_acpi_default: acpi_default {
- function = "ACPI";
- groups = "ACPI";
- };
-
- pinctrl_adc0_default: adc0_default {
- function = "ADC0";
- groups = "ADC0";
- };
-
- pinctrl_adc1_default: adc1_default {
- function = "ADC1";
- groups = "ADC1";
- };
-
- pinctrl_adc10_default: adc10_default {
- function = "ADC10";
- groups = "ADC10";
- };
-
- pinctrl_adc11_default: adc11_default {
- function = "ADC11";
- groups = "ADC11";
- };
-
- pinctrl_adc12_default: adc12_default {
- function = "ADC12";
- groups = "ADC12";
- };
-
- pinctrl_adc13_default: adc13_default {
- function = "ADC13";
- groups = "ADC13";
- };
-
- pinctrl_adc14_default: adc14_default {
- function = "ADC14";
- groups = "ADC14";
- };
-
- pinctrl_adc15_default: adc15_default {
- function = "ADC15";
- groups = "ADC15";
- };
-
- pinctrl_adc2_default: adc2_default {
- function = "ADC2";
- groups = "ADC2";
- };
-
- pinctrl_adc3_default: adc3_default {
- function = "ADC3";
- groups = "ADC3";
- };
-
- pinctrl_adc4_default: adc4_default {
- function = "ADC4";
- groups = "ADC4";
- };
-
- pinctrl_adc5_default: adc5_default {
- function = "ADC5";
- groups = "ADC5";
- };
-
- pinctrl_adc6_default: adc6_default {
- function = "ADC6";
- groups = "ADC6";
- };
-
- pinctrl_adc7_default: adc7_default {
- function = "ADC7";
- groups = "ADC7";
- };
-
- pinctrl_adc8_default: adc8_default {
- function = "ADC8";
- groups = "ADC8";
- };
-
- pinctrl_adc9_default: adc9_default {
- function = "ADC9";
- groups = "ADC9";
- };
-
- pinctrl_bmcint_default: bmcint_default {
- function = "BMCINT";
- groups = "BMCINT";
- };
-
- pinctrl_ddcclk_default: ddcclk_default {
- function = "DDCCLK";
- groups = "DDCCLK";
- };
-
- pinctrl_ddcdat_default: ddcdat_default {
- function = "DDCDAT";
- groups = "DDCDAT";
- };
-
- pinctrl_extrst_default: extrst_default {
- function = "EXTRST";
- groups = "EXTRST";
- };
-
- pinctrl_flack_default: flack_default {
- function = "FLACK";
- groups = "FLACK";
- };
-
- pinctrl_flbusy_default: flbusy_default {
- function = "FLBUSY";
- groups = "FLBUSY";
- };
-
- pinctrl_flwp_default: flwp_default {
- function = "FLWP";
- groups = "FLWP";
- };
-
- pinctrl_gpid_default: gpid_default {
- function = "GPID";
- groups = "GPID";
- };
-
- pinctrl_gpid0_default: gpid0_default {
- function = "GPID0";
- groups = "GPID0";
- };
-
- pinctrl_gpid2_default: gpid2_default {
- function = "GPID2";
- groups = "GPID2";
- };
-
- pinctrl_gpid4_default: gpid4_default {
- function = "GPID4";
- groups = "GPID4";
- };
-
- pinctrl_gpid6_default: gpid6_default {
- function = "GPID6";
- groups = "GPID6";
- };
-
- pinctrl_gpie0_default: gpie0_default {
- function = "GPIE0";
- groups = "GPIE0";
- };
-
- pinctrl_gpie2_default: gpie2_default {
- function = "GPIE2";
- groups = "GPIE2";
- };
-
- pinctrl_gpie4_default: gpie4_default {
- function = "GPIE4";
- groups = "GPIE4";
- };
-
- pinctrl_gpie6_default: gpie6_default {
- function = "GPIE6";
- groups = "GPIE6";
- };
-
- pinctrl_i2c10_default: i2c10_default {
- function = "I2C10";
- groups = "I2C10";
- };
-
- pinctrl_i2c11_default: i2c11_default {
- function = "I2C11";
- groups = "I2C11";
- };
-
- pinctrl_i2c12_default: i2c12_default {
- function = "I2C12";
- groups = "I2C12";
- };
-
- pinctrl_i2c13_default: i2c13_default {
- function = "I2C13";
- groups = "I2C13";
- };
-
- pinctrl_i2c14_default: i2c14_default {
- function = "I2C14";
- groups = "I2C14";
- };
-
- pinctrl_i2c3_default: i2c3_default {
- function = "I2C3";
- groups = "I2C3";
- };
-
- pinctrl_i2c4_default: i2c4_default {
- function = "I2C4";
- groups = "I2C4";
- };
-
- pinctrl_i2c5_default: i2c5_default {
- function = "I2C5";
- groups = "I2C5";
- };
-
- pinctrl_i2c6_default: i2c6_default {
- function = "I2C6";
- groups = "I2C6";
- };
-
- pinctrl_i2c7_default: i2c7_default {
- function = "I2C7";
- groups = "I2C7";
- };
-
- pinctrl_i2c8_default: i2c8_default {
- function = "I2C8";
- groups = "I2C8";
- };
-
- pinctrl_i2c9_default: i2c9_default {
- function = "I2C9";
- groups = "I2C9";
- };
-
- pinctrl_lpcpd_default: lpcpd_default {
- function = "LPCPD";
- groups = "LPCPD";
- };
-
- pinctrl_lpcpme_default: lpcpme_default {
- function = "LPCPME";
- groups = "LPCPME";
- };
-
- pinctrl_lpcrst_default: lpcrst_default {
- function = "LPCRST";
- groups = "LPCRST";
- };
-
- pinctrl_lpcsmi_default: lpcsmi_default {
- function = "LPCSMI";
- groups = "LPCSMI";
- };
-
- pinctrl_mac1link_default: mac1link_default {
- function = "MAC1LINK";
- groups = "MAC1LINK";
- };
-
- pinctrl_mac2link_default: mac2link_default {
- function = "MAC2LINK";
- groups = "MAC2LINK";
- };
-
- pinctrl_mdio1_default: mdio1_default {
- function = "MDIO1";
- groups = "MDIO1";
- };
-
- pinctrl_mdio2_default: mdio2_default {
- function = "MDIO2";
- groups = "MDIO2";
- };
-
- pinctrl_ncts1_default: ncts1_default {
- function = "NCTS1";
- groups = "NCTS1";
- };
-
- pinctrl_ncts2_default: ncts2_default {
- function = "NCTS2";
- groups = "NCTS2";
- };
-
- pinctrl_ncts3_default: ncts3_default {
- function = "NCTS3";
- groups = "NCTS3";
- };
-
- pinctrl_ncts4_default: ncts4_default {
- function = "NCTS4";
- groups = "NCTS4";
- };
-
- pinctrl_ndcd1_default: ndcd1_default {
- function = "NDCD1";
- groups = "NDCD1";
- };
-
- pinctrl_ndcd2_default: ndcd2_default {
- function = "NDCD2";
- groups = "NDCD2";
- };
-
- pinctrl_ndcd3_default: ndcd3_default {
- function = "NDCD3";
- groups = "NDCD3";
- };
-
- pinctrl_ndcd4_default: ndcd4_default {
- function = "NDCD4";
- groups = "NDCD4";
- };
-
- pinctrl_ndsr1_default: ndsr1_default {
- function = "NDSR1";
- groups = "NDSR1";
- };
-
- pinctrl_ndsr2_default: ndsr2_default {
- function = "NDSR2";
- groups = "NDSR2";
- };
-
- pinctrl_ndsr3_default: ndsr3_default {
- function = "NDSR3";
- groups = "NDSR3";
- };
-
- pinctrl_ndsr4_default: ndsr4_default {
- function = "NDSR4";
- groups = "NDSR4";
- };
-
- pinctrl_ndtr1_default: ndtr1_default {
- function = "NDTR1";
- groups = "NDTR1";
- };
-
- pinctrl_ndtr2_default: ndtr2_default {
- function = "NDTR2";
- groups = "NDTR2";
- };
-
- pinctrl_ndtr3_default: ndtr3_default {
- function = "NDTR3";
- groups = "NDTR3";
- };
-
- pinctrl_ndtr4_default: ndtr4_default {
- function = "NDTR4";
- groups = "NDTR4";
- };
-
- pinctrl_ndts4_default: ndts4_default {
- function = "NDTS4";
- groups = "NDTS4";
- };
-
- pinctrl_nri1_default: nri1_default {
- function = "NRI1";
- groups = "NRI1";
- };
-
- pinctrl_nri2_default: nri2_default {
- function = "NRI2";
- groups = "NRI2";
- };
-
- pinctrl_nri3_default: nri3_default {
- function = "NRI3";
- groups = "NRI3";
- };
-
- pinctrl_nri4_default: nri4_default {
- function = "NRI4";
- groups = "NRI4";
- };
-
- pinctrl_nrts1_default: nrts1_default {
- function = "NRTS1";
- groups = "NRTS1";
- };
-
- pinctrl_nrts2_default: nrts2_default {
- function = "NRTS2";
- groups = "NRTS2";
- };
-
- pinctrl_nrts3_default: nrts3_default {
- function = "NRTS3";
- groups = "NRTS3";
- };
-
- pinctrl_oscclk_default: oscclk_default {
- function = "OSCCLK";
- groups = "OSCCLK";
- };
-
- pinctrl_pwm0_default: pwm0_default {
- function = "PWM0";
- groups = "PWM0";
- };
-
- pinctrl_pwm1_default: pwm1_default {
- function = "PWM1";
- groups = "PWM1";
- };
-
- pinctrl_pwm2_default: pwm2_default {
- function = "PWM2";
- groups = "PWM2";
- };
-
- pinctrl_pwm3_default: pwm3_default {
- function = "PWM3";
- groups = "PWM3";
- };
-
- pinctrl_pwm4_default: pwm4_default {
- function = "PWM4";
- groups = "PWM4";
- };
-
- pinctrl_pwm5_default: pwm5_default {
- function = "PWM5";
- groups = "PWM5";
- };
-
- pinctrl_pwm6_default: pwm6_default {
- function = "PWM6";
- groups = "PWM6";
- };
-
- pinctrl_pwm7_default: pwm7_default {
- function = "PWM7";
- groups = "PWM7";
- };
-
- pinctrl_rgmii1_default: rgmii1_default {
- function = "RGMII1";
- groups = "RGMII1";
- };
-
- pinctrl_rgmii2_default: rgmii2_default {
- function = "RGMII2";
- groups = "RGMII2";
- };
-
- pinctrl_rmii1_default: rmii1_default {
- function = "RMII1";
- groups = "RMII1";
- };
-
- pinctrl_rmii2_default: rmii2_default {
- function = "RMII2";
- groups = "RMII2";
- };
-
- pinctrl_rom16_default: rom16_default {
- function = "ROM16";
- groups = "ROM16";
- };
-
- pinctrl_rom8_default: rom8_default {
- function = "ROM8";
- groups = "ROM8";
- };
-
- pinctrl_romcs1_default: romcs1_default {
- function = "ROMCS1";
- groups = "ROMCS1";
- };
-
- pinctrl_romcs2_default: romcs2_default {
- function = "ROMCS2";
- groups = "ROMCS2";
- };
-
- pinctrl_romcs3_default: romcs3_default {
- function = "ROMCS3";
- groups = "ROMCS3";
- };
-
- pinctrl_romcs4_default: romcs4_default {
- function = "ROMCS4";
- groups = "ROMCS4";
- };
-
- pinctrl_rxd1_default: rxd1_default {
- function = "RXD1";
- groups = "RXD1";
- };
-
- pinctrl_rxd2_default: rxd2_default {
- function = "RXD2";
- groups = "RXD2";
- };
-
- pinctrl_rxd3_default: rxd3_default {
- function = "RXD3";
- groups = "RXD3";
- };
-
- pinctrl_rxd4_default: rxd4_default {
- function = "RXD4";
- groups = "RXD4";
- };
-
- pinctrl_salt1_default: salt1_default {
- function = "SALT1";
- groups = "SALT1";
- };
-
- pinctrl_salt2_default: salt2_default {
- function = "SALT2";
- groups = "SALT2";
- };
-
- pinctrl_salt3_default: salt3_default {
- function = "SALT3";
- groups = "SALT3";
- };
-
- pinctrl_salt4_default: salt4_default {
- function = "SALT4";
- groups = "SALT4";
- };
-
- pinctrl_sd1_default: sd1_default {
- function = "SD1";
- groups = "SD1";
- };
-
- pinctrl_sd2_default: sd2_default {
- function = "SD2";
- groups = "SD2";
- };
-
- pinctrl_sgpmck_default: sgpmck_default {
- function = "SGPMCK";
- groups = "SGPMCK";
- };
-
- pinctrl_sgpmi_default: sgpmi_default {
- function = "SGPMI";
- groups = "SGPMI";
- };
-
- pinctrl_sgpmld_default: sgpmld_default {
- function = "SGPMLD";
- groups = "SGPMLD";
- };
-
- pinctrl_sgpmo_default: sgpmo_default {
- function = "SGPMO";
- groups = "SGPMO";
- };
-
- pinctrl_sgpsck_default: sgpsck_default {
- function = "SGPSCK";
- groups = "SGPSCK";
- };
-
- pinctrl_sgpsi0_default: sgpsi0_default {
- function = "SGPSI0";
- groups = "SGPSI0";
- };
-
- pinctrl_sgpsi1_default: sgpsi1_default {
- function = "SGPSI1";
- groups = "SGPSI1";
- };
-
- pinctrl_sgpsld_default: sgpsld_default {
- function = "SGPSLD";
- groups = "SGPSLD";
- };
-
- pinctrl_sioonctrl_default: sioonctrl_default {
- function = "SIOONCTRL";
- groups = "SIOONCTRL";
- };
-
- pinctrl_siopbi_default: siopbi_default {
- function = "SIOPBI";
- groups = "SIOPBI";
- };
-
- pinctrl_siopbo_default: siopbo_default {
- function = "SIOPBO";
- groups = "SIOPBO";
- };
-
- pinctrl_siopwreq_default: siopwreq_default {
- function = "SIOPWREQ";
- groups = "SIOPWREQ";
- };
-
- pinctrl_siopwrgd_default: siopwrgd_default {
- function = "SIOPWRGD";
- groups = "SIOPWRGD";
- };
-
- pinctrl_sios3_default: sios3_default {
- function = "SIOS3";
- groups = "SIOS3";
- };
-
- pinctrl_sios5_default: sios5_default {
- function = "SIOS5";
- groups = "SIOS5";
- };
-
- pinctrl_siosci_default: siosci_default {
- function = "SIOSCI";
- groups = "SIOSCI";
- };
-
- pinctrl_spi1_default: spi1_default {
- function = "SPI1";
- groups = "SPI1";
- };
-
- pinctrl_spi1debug_default: spi1debug_default {
- function = "SPI1DEBUG";
- groups = "SPI1DEBUG";
- };
-
- pinctrl_spi1passthru_default: spi1passthru_default {
- function = "SPI1PASSTHRU";
- groups = "SPI1PASSTHRU";
- };
-
- pinctrl_spics1_default: spics1_default {
- function = "SPICS1";
- groups = "SPICS1";
- };
-
- pinctrl_timer3_default: timer3_default {
- function = "TIMER3";
- groups = "TIMER3";
- };
-
- pinctrl_timer4_default: timer4_default {
- function = "TIMER4";
- groups = "TIMER4";
- };
-
- pinctrl_timer5_default: timer5_default {
- function = "TIMER5";
- groups = "TIMER5";
- };
-
- pinctrl_timer6_default: timer6_default {
- function = "TIMER6";
- groups = "TIMER6";
- };
-
- pinctrl_timer7_default: timer7_default {
- function = "TIMER7";
- groups = "TIMER7";
- };
-
- pinctrl_timer8_default: timer8_default {
- function = "TIMER8";
- groups = "TIMER8";
- };
-
- pinctrl_txd1_default: txd1_default {
- function = "TXD1";
- groups = "TXD1";
- };
-
- pinctrl_txd2_default: txd2_default {
- function = "TXD2";
- groups = "TXD2";
- };
-
- pinctrl_txd3_default: txd3_default {
- function = "TXD3";
- groups = "TXD3";
- };
-
- pinctrl_txd4_default: txd4_default {
- function = "TXD4";
- groups = "TXD4";
- };
-
- pinctrl_uart6_default: uart6_default {
- function = "UART6";
- groups = "UART6";
- };
-
- pinctrl_usbcki_default: usbcki_default {
- function = "USBCKI";
- groups = "USBCKI";
- };
-
- pinctrl_vgabios_rom_default: vgabios_rom_default {
- function = "VGABIOS_ROM";
- groups = "VGABIOS_ROM";
- };
-
- pinctrl_vgahs_default: vgahs_default {
- function = "VGAHS";
- groups = "VGAHS";
- };
-
- pinctrl_vgavs_default: vgavs_default {
- function = "VGAVS";
- groups = "VGAVS";
- };
-
- pinctrl_vpi18_default: vpi18_default {
- function = "VPI18";
- groups = "VPI18";
- };
-
- pinctrl_vpi24_default: vpi24_default {
- function = "VPI24";
- groups = "VPI24";
- };
-
- pinctrl_vpi30_default: vpi30_default {
- function = "VPI30";
- groups = "VPI30";
- };
-
- pinctrl_vpo12_default: vpo12_default {
- function = "VPO12";
- groups = "VPO12";
- };
-
- pinctrl_vpo24_default: vpo24_default {
- function = "VPO24";
- groups = "VPO24";
- };
-
- pinctrl_wdtrst1_default: wdtrst1_default {
- function = "WDTRST1";
- groups = "WDTRST1";
- };
-
- pinctrl_wdtrst2_default: wdtrst2_default {
- function = "WDTRST2";
- groups = "WDTRST2";
- };
-
};
};
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2400-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
clock-names = "PCLK";
};
- wdt1: wdt@1e785000 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785000 0x1c>;
- interrupts = <27>;
- };
-
- wdt2: wdt@1e785020 {
- compatible = "aspeed,ast2400-wdt";
- reg = <0x1e785020 0x1c>;
- interrupts = <27>;
- clocks = <&clk_apb>;
- status = "disabled";
- };
-
uart1: serial@1e783000 {
compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
+ reg = <0x1e783000 0x20>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
status = "disabled";
};
- uart2: serial@1e78d000 {
+ uart5: serial@1e784000 {
compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
+ reg = <0x1e784000 0x20>;
reg-shift = <2>;
- interrupts = <32>;
+ interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart3: serial@1e78e000 {
- compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785000 0x1c>;
+ };
+
+ wdt2: watchdog@1e785020 {
+ compatible = "aspeed,ast2400-wdt";
+ reg = <0x1e785020 0x1c>;
+ };
+
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2400-vuart";
+ reg = <0x1e787000 0x40>;
reg-shift = <2>;
- interrupts = <33>;
+ interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart4: serial@1e78f000 {
+ uart2: serial@1e78d000 {
compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
+ reg = <0x1e78d000 0x20>;
reg-shift = <2>;
- interrupts = <34>;
+ interrupts = <32>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- uart5: serial@1e784000 {
+ uart3: serial@1e78e000 {
compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
+ reg = <0x1e78e000 0x20>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <33>;
clocks = <&clk_uart>;
- current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
- uart6: serial@1e787000 {
+ uart4: serial@1e78f000 {
compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
+ reg = <0x1e78f000 0x20>;
reg-shift = <2>;
- interrupts = <10>;
+ interrupts = <34>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
- adc: adc@1e6e9000 {
- compatible = "aspeed,ast2400-adc";
- reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
- #io-channel-cells = <1>;
- status = "disabled";
+ i2c: i2c@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
};
};
};
};
+
+ &i2c {
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2400-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
+
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
+
+ i2c1: i2c-bus@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <1>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
+
+ i2c2: i2c-bus@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0xc0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <2>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ status = "disabled";
+ };
+
+ i2c3: i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x100 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <3>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ status = "disabled";
+ };
+
+ i2c4: i2c-bus@140 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x140 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <4>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ status = "disabled";
+ };
+
+ i2c5: i2c-bus@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x180 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <5>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+ status = "disabled";
+ };
+
+ i2c6: i2c-bus@1c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x1c0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <6>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+ status = "disabled";
+ };
+
+ i2c7: i2c-bus@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x300 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <7>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+ status = "disabled";
+ };
+
+ i2c8: i2c-bus@340 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x340 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <8>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+ status = "disabled";
+ };
+
+ i2c9: i2c-bus@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x380 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <9>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ status = "disabled";
+ };
+
+ i2c10: i2c-bus@3c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x3c0 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <10>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ status = "disabled";
+ };
+
+ i2c11: i2c-bus@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x400 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <11>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
+ status = "disabled";
+ };
+
+ i2c12: i2c-bus@440 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x440 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <12>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
+ status = "disabled";
+ };
+
+ i2c13: i2c-bus@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x480 0x40>;
+ compatible = "aspeed,ast2400-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <13>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
+ status = "disabled";
+ };
+ };
+
+ &pinctrl {
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
+
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
+
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
+
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
+
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
+
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
+
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
+
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
+
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
+
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
+
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
+
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
+
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
+
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
+
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
+
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
+
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
+
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
+
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
+
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
+
+ pinctrl_extrst_default: extrst_default {
+ function = "EXTRST";
+ groups = "EXTRST";
+ };
+
+ pinctrl_flack_default: flack_default {
+ function = "FLACK";
+ groups = "FLACK";
+ };
+
+ pinctrl_flbusy_default: flbusy_default {
+ function = "FLBUSY";
+ groups = "FLBUSY";
+ };
+
+ pinctrl_flwp_default: flwp_default {
+ function = "FLWP";
+ groups = "FLWP";
+ };
+
+ pinctrl_gpid_default: gpid_default {
+ function = "GPID";
+ groups = "GPID";
+ };
+
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
+
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
+
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
+
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
+
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
+
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
+
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
+
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
+
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
+
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
+
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
+
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
+
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
+
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
+
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
+
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
+
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
+
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
+
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
+
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
+
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
+
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
+
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
+
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
+
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
+
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
+
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
+
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
+
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
+
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
+
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
+
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
+
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
+
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
+
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
+
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
+
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
+
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
+
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
+
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
+
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
+
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
+
+ pinctrl_ndts4_default: ndts4_default {
+ function = "NDTS4";
+ groups = "NDTS4";
+ };
+
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
+
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
+
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
+
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
+
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
+
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
+
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
+
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
+
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
+
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
+
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
+
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
+
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
+
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
+
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
+
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
+
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
+
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
+
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
+
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
+
+ pinctrl_rom16_default: rom16_default {
+ function = "ROM16";
+ groups = "ROM16";
+ };
+
+ pinctrl_rom8_default: rom8_default {
+ function = "ROM8";
+ groups = "ROM8";
+ };
+
+ pinctrl_romcs1_default: romcs1_default {
+ function = "ROMCS1";
+ groups = "ROMCS1";
+ };
+
+ pinctrl_romcs2_default: romcs2_default {
+ function = "ROMCS2";
+ groups = "ROMCS2";
+ };
+
+ pinctrl_romcs3_default: romcs3_default {
+ function = "ROMCS3";
+ groups = "ROMCS3";
+ };
+
+ pinctrl_romcs4_default: romcs4_default {
+ function = "ROMCS4";
+ groups = "ROMCS4";
+ };
+
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
+
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
+
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
+
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
+
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
+
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
+
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
+
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
+
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
+
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
+
+ pinctrl_sgpmck_default: sgpmck_default {
+ function = "SGPMCK";
+ groups = "SGPMCK";
+ };
+
+ pinctrl_sgpmi_default: sgpmi_default {
+ function = "SGPMI";
+ groups = "SGPMI";
+ };
+
+ pinctrl_sgpmld_default: sgpmld_default {
+ function = "SGPMLD";
+ groups = "SGPMLD";
+ };
+
+ pinctrl_sgpmo_default: sgpmo_default {
+ function = "SGPMO";
+ groups = "SGPMO";
+ };
+
+ pinctrl_sgpsck_default: sgpsck_default {
+ function = "SGPSCK";
+ groups = "SGPSCK";
+ };
+
+ pinctrl_sgpsi0_default: sgpsi0_default {
+ function = "SGPSI0";
+ groups = "SGPSI0";
+ };
+
+ pinctrl_sgpsi1_default: sgpsi1_default {
+ function = "SGPSI1";
+ groups = "SGPSI1";
+ };
+
+ pinctrl_sgpsld_default: sgpsld_default {
+ function = "SGPSLD";
+ groups = "SGPSLD";
+ };
+
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
+
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
+
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
+
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
+
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
+
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
+
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
+
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
+
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
+
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
+
+ pinctrl_spics1_default: spics1_default {
+ function = "SPICS1";
+ groups = "SPICS1";
+ };
+
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
+
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
+
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabios_rom_default: vgabios_rom_default {
+ function = "VGABIOS_ROM";
+ groups = "VGABIOS_ROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi18_default: vpi18_default {
+ function = "VPI18";
+ groups = "VPI18";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpi30_default: vpi30_default {
+ function = "VPI30";
+ groups = "VPI30";
+ };
+
+ pinctrl_vpo12_default: vpo12_default {
+ function = "VPO12";
+ groups = "VPO12";
+ };
+
+ pinctrl_vpo24_default: vpo24_default {
+ function = "VPO24";
+ groups = "VPO24";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
+ };
+ };
+// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
/ {
#size-cells = <1>;
interrupt-parent = <&vic>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
+ i2c9 = &i2c9;
+ i2c10 = &i2c10;
+ i2c11 = &i2c11;
+ i2c12 = &i2c12;
+ i2c13 = &i2c13;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &vuart;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <198000000>;
};
- clk_apb: clk_apb@08 {
+ clk_apb: clk_apb@8 {
#clock-cells = <0>;
compatible = "aspeed,g5-apb-clock", "fixed-clock";
reg = <0x08>;
compatible = "aspeed,g5-pinctrl";
aspeed,external-nodes = <&gfx &lhc>;
- pinctrl_acpi_default: acpi_default {
- function = "ACPI";
- groups = "ACPI";
- };
+ };
- pinctrl_adc0_default: adc0_default {
- function = "ADC0";
- groups = "ADC0";
- };
+ };
- pinctrl_adc1_default: adc1_default {
- function = "ADC1";
- groups = "ADC1";
- };
+ gfx: display@1e6e6000 {
+ compatible = "aspeed,ast2500-gfx", "syscon";
+ reg = <0x1e6e6000 0x1000>;
+ reg-io-width = <4>;
+ };
- pinctrl_adc10_default: adc10_default {
- function = "ADC10";
- groups = "ADC10";
- };
+ adc: adc@1e6e9000 {
+ compatible = "aspeed,ast2500-adc";
+ reg = <0x1e6e9000 0xb0>;
+ clocks = <&clk_apb>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
- pinctrl_adc11_default: adc11_default {
- function = "ADC11";
- groups = "ADC11";
- };
+ sram@1e720000 {
+ compatible = "mmio-sram";
+ reg = <0x1e720000 0x9000>; // 36K
+ };
- pinctrl_adc12_default: adc12_default {
- function = "ADC12";
- groups = "ADC12";
- };
+ gpio: gpio@1e780000 {
+ #gpio-cells = <2>;
+ gpio-controller;
+ compatible = "aspeed,ast2500-gpio";
+ reg = <0x1e780000 0x1000>;
+ interrupts = <20>;
+ gpio-ranges = <&pinctrl 0 0 220>;
+ interrupt-controller;
+ };
- pinctrl_adc13_default: adc13_default {
- function = "ADC13";
- groups = "ADC13";
- };
+ timer: timer@1e782000 {
+ /* This timer is a Faraday FTTMR010 derivative */
+ compatible = "aspeed,ast2400-timer";
+ reg = <0x1e782000 0x90>;
+ interrupts = <16 17 18 35 36 37 38 39>;
+ clocks = <&clk_apb>;
+ clock-names = "PCLK";
+ };
- pinctrl_adc14_default: adc14_default {
- function = "ADC14";
- groups = "ADC14";
- };
+ uart1: serial@1e783000 {
+ compatible = "ns16550a";
+ reg = <0x1e783000 0x20>;
+ reg-shift = <2>;
+ interrupts = <9>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_adc15_default: adc15_default {
- function = "ADC15";
- groups = "ADC15";
- };
+ uart5: serial@1e784000 {
+ compatible = "ns16550a";
+ reg = <0x1e784000 0x20>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_adc2_default: adc2_default {
- function = "ADC2";
- groups = "ADC2";
- };
+ wdt1: watchdog@1e785000 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785000 0x20>;
+ };
- pinctrl_adc3_default: adc3_default {
- function = "ADC3";
- groups = "ADC3";
- };
+ wdt2: watchdog@1e785020 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785020 0x20>;
+ };
- pinctrl_adc4_default: adc4_default {
- function = "ADC4";
- groups = "ADC4";
- };
+ wdt3: watchdog@1e785040 {
+ compatible = "aspeed,ast2500-wdt";
+ reg = <0x1e785040 0x20>;
+ status = "disabled";
+ };
- pinctrl_adc5_default: adc5_default {
- function = "ADC5";
- groups = "ADC5";
- };
+ lpc: lpc@1e789000 {
+ compatible = "aspeed,ast2500-lpc", "simple-mfd";
+ reg = <0x1e789000 0x1000>;
- pinctrl_adc6_default: adc6_default {
- function = "ADC6";
- groups = "ADC6";
- };
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e789000 0x1000>;
- pinctrl_adc7_default: adc7_default {
- function = "ADC7";
- groups = "ADC7";
- };
+ lpc_bmc: lpc-bmc@0 {
+ compatible = "aspeed,ast2500-lpc-bmc";
+ reg = <0x0 0x80>;
+ };
- pinctrl_adc8_default: adc8_default {
- function = "ADC8";
- groups = "ADC8";
- };
+ lpc_host: lpc-host@80 {
+ compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
+ reg = <0x80 0x1e0>;
- pinctrl_adc9_default: adc9_default {
- function = "ADC9";
- groups = "ADC9";
- };
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80 0x1e0>;
- pinctrl_bmcint_default: bmcint_default {
- function = "BMCINT";
- groups = "BMCINT";
- };
+ reg-io-width = <4>;
- pinctrl_ddcclk_default: ddcclk_default {
- function = "DDCCLK";
- groups = "DDCCLK";
+ lhc: lhc@20 {
+ compatible = "aspeed,ast2500-lhc";
+ reg = <0x20 0x24 0x48 0x8>;
};
+ };
+ };
- pinctrl_ddcdat_default: ddcdat_default {
- function = "DDCDAT";
- groups = "DDCDAT";
- };
+ vuart: serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <10>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_espi_default: espi_default {
- function = "ESPI";
- groups = "ESPI";
- };
+ uart2: serial@1e78d000 {
+ compatible = "ns16550a";
+ reg = <0x1e78d000 0x20>;
+ reg-shift = <2>;
+ interrupts = <32>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_fwspics1_default: fwspics1_default {
- function = "FWSPICS1";
- groups = "FWSPICS1";
- };
+ uart3: serial@1e78e000 {
+ compatible = "ns16550a";
+ reg = <0x1e78e000 0x20>;
+ reg-shift = <2>;
+ interrupts = <33>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_fwspics2_default: fwspics2_default {
- function = "FWSPICS2";
- groups = "FWSPICS2";
- };
+ uart4: serial@1e78f000 {
+ compatible = "ns16550a";
+ reg = <0x1e78f000 0x20>;
+ reg-shift = <2>;
+ interrupts = <34>;
+ clocks = <&clk_uart>;
+ no-loopback-test;
+ status = "disabled";
+ };
- pinctrl_gpid0_default: gpid0_default {
- function = "GPID0";
- groups = "GPID0";
- };
+ i2c: i2c@1e78a000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1e78a000 0x1000>;
+ };
+ };
+ };
+ };
- pinctrl_gpid2_default: gpid2_default {
- function = "GPID2";
- groups = "GPID2";
- };
+ &i2c {
+ i2c_ic: interrupt-controller@0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2500-i2c-ic";
+ reg = <0x0 0x40>;
+ interrupts = <12>;
+ interrupt-controller;
+ };
- pinctrl_gpid4_default: gpid4_default {
- function = "GPID4";
- groups = "GPID4";
- };
+ i2c0: i2c-bus@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x40 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <0>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
- pinctrl_gpid6_default: gpid6_default {
- function = "GPID6";
- groups = "GPID6";
- };
+ i2c1: i2c-bus@80 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x80 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <1>;
+ interrupt-parent = <&i2c_ic>;
+ status = "disabled";
+ /* Does not need pinctrl properties */
+ };
- pinctrl_gpie0_default: gpie0_default {
- function = "GPIE0";
- groups = "GPIE0";
- };
+ i2c2: i2c-bus@c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0xc0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <2>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+ status = "disabled";
+ };
- pinctrl_gpie2_default: gpie2_default {
- function = "GPIE2";
- groups = "GPIE2";
- };
+ i2c3: i2c-bus@100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x100 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <3>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+ status = "disabled";
+ };
- pinctrl_gpie4_default: gpie4_default {
- function = "GPIE4";
- groups = "GPIE4";
- };
+ i2c4: i2c-bus@140 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x140 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <4>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+ status = "disabled";
+ };
- pinctrl_gpie6_default: gpie6_default {
- function = "GPIE6";
- groups = "GPIE6";
- };
+ i2c5: i2c-bus@180 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x180 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <5>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c6_default>;
+ status = "disabled";
+ };
- pinctrl_i2c10_default: i2c10_default {
- function = "I2C10";
- groups = "I2C10";
- };
+ i2c6: i2c-bus@1c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x1c0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <6>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c7_default>;
+ status = "disabled";
+ };
- pinctrl_i2c11_default: i2c11_default {
- function = "I2C11";
- groups = "I2C11";
- };
+ i2c7: i2c-bus@300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x300 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <7>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c8_default>;
+ status = "disabled";
+ };
- pinctrl_i2c12_default: i2c12_default {
- function = "I2C12";
- groups = "I2C12";
- };
+ i2c8: i2c-bus@340 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x340 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <8>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c9_default>;
+ status = "disabled";
+ };
- pinctrl_i2c13_default: i2c13_default {
- function = "I2C13";
- groups = "I2C13";
- };
+ i2c9: i2c-bus@380 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x380 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <9>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+ status = "disabled";
+ };
- pinctrl_i2c14_default: i2c14_default {
- function = "I2C14";
- groups = "I2C14";
- };
+ i2c10: i2c-bus@3c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x3c0 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <10>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+ status = "disabled";
+ };
- pinctrl_i2c3_default: i2c3_default {
- function = "I2C3";
- groups = "I2C3";
- };
+ i2c11: i2c-bus@400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x400 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <11>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c12_default>;
+ status = "disabled";
+ };
- pinctrl_i2c4_default: i2c4_default {
- function = "I2C4";
- groups = "I2C4";
- };
+ i2c12: i2c-bus@440 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x440 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <12>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c13_default>;
+ status = "disabled";
+ };
- pinctrl_i2c5_default: i2c5_default {
- function = "I2C5";
- groups = "I2C5";
- };
+ i2c13: i2c-bus@480 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ reg = <0x480 0x40>;
+ compatible = "aspeed,ast2500-i2c-bus";
+ clocks = <&clk_apb>;
+ bus-frequency = <100000>;
+ interrupts = <13>;
+ interrupt-parent = <&i2c_ic>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c14_default>;
+ status = "disabled";
+ };
+ };
- pinctrl_i2c6_default: i2c6_default {
- function = "I2C6";
- groups = "I2C6";
- };
+ &pinctrl {
+ pinctrl_acpi_default: acpi_default {
+ function = "ACPI";
+ groups = "ACPI";
+ };
- pinctrl_i2c7_default: i2c7_default {
- function = "I2C7";
- groups = "I2C7";
- };
+ pinctrl_adc0_default: adc0_default {
+ function = "ADC0";
+ groups = "ADC0";
+ };
- pinctrl_i2c8_default: i2c8_default {
- function = "I2C8";
- groups = "I2C8";
- };
+ pinctrl_adc1_default: adc1_default {
+ function = "ADC1";
+ groups = "ADC1";
+ };
- pinctrl_i2c9_default: i2c9_default {
- function = "I2C9";
- groups = "I2C9";
- };
+ pinctrl_adc10_default: adc10_default {
+ function = "ADC10";
+ groups = "ADC10";
+ };
- pinctrl_lad0_default: lad0_default {
- function = "LAD0";
- groups = "LAD0";
- };
- pinctrl_lad1_default: lad1_default {
- function = "LAD1";
- groups = "LAD1";
- };
+ pinctrl_adc11_default: adc11_default {
+ function = "ADC11";
+ groups = "ADC11";
+ };
- pinctrl_lad2_default: lad2_default {
- function = "LAD2";
- groups = "LAD2";
- };
+ pinctrl_adc12_default: adc12_default {
+ function = "ADC12";
+ groups = "ADC12";
+ };
- pinctrl_lad3_default: lad3_default {
- function = "LAD3";
- groups = "LAD3";
- };
+ pinctrl_adc13_default: adc13_default {
+ function = "ADC13";
+ groups = "ADC13";
+ };
- pinctrl_lclk_default: lclk_default {
- function = "LCLK";
- groups = "LCLK";
- };
+ pinctrl_adc14_default: adc14_default {
+ function = "ADC14";
+ groups = "ADC14";
+ };
- pinctrl_lframe_default: lframe_default {
- function = "LFRAME";
- groups = "LFRAME";
- };
+ pinctrl_adc15_default: adc15_default {
+ function = "ADC15";
+ groups = "ADC15";
+ };
- pinctrl_lpchc_default: lpchc_default {
- function = "LPCHC";
- groups = "LPCHC";
- };
+ pinctrl_adc2_default: adc2_default {
+ function = "ADC2";
+ groups = "ADC2";
+ };
- pinctrl_lpcpd_default: lpcpd_default {
- function = "LPCPD";
- groups = "LPCPD";
- };
+ pinctrl_adc3_default: adc3_default {
+ function = "ADC3";
+ groups = "ADC3";
+ };
- pinctrl_lpcplus_default: lpcplus_default {
- function = "LPCPLUS";
- groups = "LPCPLUS";
- };
+ pinctrl_adc4_default: adc4_default {
+ function = "ADC4";
+ groups = "ADC4";
+ };
- pinctrl_lpcpme_default: lpcpme_default {
- function = "LPCPME";
- groups = "LPCPME";
- };
+ pinctrl_adc5_default: adc5_default {
+ function = "ADC5";
+ groups = "ADC5";
+ };
- pinctrl_lpcrst_default: lpcrst_default {
- function = "LPCRST";
- groups = "LPCRST";
- };
+ pinctrl_adc6_default: adc6_default {
+ function = "ADC6";
+ groups = "ADC6";
+ };
- pinctrl_lpcsmi_default: lpcsmi_default {
- function = "LPCSMI";
- groups = "LPCSMI";
- };
+ pinctrl_adc7_default: adc7_default {
+ function = "ADC7";
+ groups = "ADC7";
+ };
- pinctrl_lsirq_default: lsirq_default {
- function = "LSIRQ";
- groups = "LSIRQ";
- };
+ pinctrl_adc8_default: adc8_default {
+ function = "ADC8";
+ groups = "ADC8";
+ };
- pinctrl_mac1link_default: mac1link_default {
- function = "MAC1LINK";
- groups = "MAC1LINK";
- };
+ pinctrl_adc9_default: adc9_default {
+ function = "ADC9";
+ groups = "ADC9";
+ };
- pinctrl_mac2link_default: mac2link_default {
- function = "MAC2LINK";
- groups = "MAC2LINK";
- };
+ pinctrl_bmcint_default: bmcint_default {
+ function = "BMCINT";
+ groups = "BMCINT";
+ };
- pinctrl_mdio1_default: mdio1_default {
- function = "MDIO1";
- groups = "MDIO1";
- };
+ pinctrl_ddcclk_default: ddcclk_default {
+ function = "DDCCLK";
+ groups = "DDCCLK";
+ };
- pinctrl_mdio2_default: mdio2_default {
- function = "MDIO2";
- groups = "MDIO2";
- };
+ pinctrl_ddcdat_default: ddcdat_default {
+ function = "DDCDAT";
+ groups = "DDCDAT";
+ };
- pinctrl_ncts1_default: ncts1_default {
- function = "NCTS1";
- groups = "NCTS1";
- };
+ pinctrl_espi_default: espi_default {
+ function = "ESPI";
+ groups = "ESPI";
+ };
- pinctrl_ncts2_default: ncts2_default {
- function = "NCTS2";
- groups = "NCTS2";
- };
+ pinctrl_fwspics1_default: fwspics1_default {
+ function = "FWSPICS1";
+ groups = "FWSPICS1";
+ };
- pinctrl_ncts3_default: ncts3_default {
- function = "NCTS3";
- groups = "NCTS3";
- };
+ pinctrl_fwspics2_default: fwspics2_default {
+ function = "FWSPICS2";
+ groups = "FWSPICS2";
+ };
- pinctrl_ncts4_default: ncts4_default {
- function = "NCTS4";
- groups = "NCTS4";
- };
+ pinctrl_gpid0_default: gpid0_default {
+ function = "GPID0";
+ groups = "GPID0";
+ };
- pinctrl_ndcd1_default: ndcd1_default {
- function = "NDCD1";
- groups = "NDCD1";
- };
+ pinctrl_gpid2_default: gpid2_default {
+ function = "GPID2";
+ groups = "GPID2";
+ };
- pinctrl_ndcd2_default: ndcd2_default {
- function = "NDCD2";
- groups = "NDCD2";
- };
+ pinctrl_gpid4_default: gpid4_default {
+ function = "GPID4";
+ groups = "GPID4";
+ };
- pinctrl_ndcd3_default: ndcd3_default {
- function = "NDCD3";
- groups = "NDCD3";
- };
+ pinctrl_gpid6_default: gpid6_default {
+ function = "GPID6";
+ groups = "GPID6";
+ };
- pinctrl_ndcd4_default: ndcd4_default {
- function = "NDCD4";
- groups = "NDCD4";
- };
+ pinctrl_gpie0_default: gpie0_default {
+ function = "GPIE0";
+ groups = "GPIE0";
+ };
- pinctrl_ndsr1_default: ndsr1_default {
- function = "NDSR1";
- groups = "NDSR1";
- };
+ pinctrl_gpie2_default: gpie2_default {
+ function = "GPIE2";
+ groups = "GPIE2";
+ };
- pinctrl_ndsr2_default: ndsr2_default {
- function = "NDSR2";
- groups = "NDSR2";
- };
+ pinctrl_gpie4_default: gpie4_default {
+ function = "GPIE4";
+ groups = "GPIE4";
+ };
- pinctrl_ndsr3_default: ndsr3_default {
- function = "NDSR3";
- groups = "NDSR3";
- };
+ pinctrl_gpie6_default: gpie6_default {
+ function = "GPIE6";
+ groups = "GPIE6";
+ };
- pinctrl_ndsr4_default: ndsr4_default {
- function = "NDSR4";
- groups = "NDSR4";
- };
+ pinctrl_i2c10_default: i2c10_default {
+ function = "I2C10";
+ groups = "I2C10";
+ };
- pinctrl_ndtr1_default: ndtr1_default {
- function = "NDTR1";
- groups = "NDTR1";
- };
+ pinctrl_i2c11_default: i2c11_default {
+ function = "I2C11";
+ groups = "I2C11";
+ };
- pinctrl_ndtr2_default: ndtr2_default {
- function = "NDTR2";
- groups = "NDTR2";
- };
+ pinctrl_i2c12_default: i2c12_default {
+ function = "I2C12";
+ groups = "I2C12";
+ };
- pinctrl_ndtr3_default: ndtr3_default {
- function = "NDTR3";
- groups = "NDTR3";
- };
+ pinctrl_i2c13_default: i2c13_default {
+ function = "I2C13";
+ groups = "I2C13";
+ };
- pinctrl_ndtr4_default: ndtr4_default {
- function = "NDTR4";
- groups = "NDTR4";
- };
+ pinctrl_i2c14_default: i2c14_default {
+ function = "I2C14";
+ groups = "I2C14";
+ };
- pinctrl_nri1_default: nri1_default {
- function = "NRI1";
- groups = "NRI1";
- };
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
- pinctrl_nri2_default: nri2_default {
- function = "NRI2";
- groups = "NRI2";
- };
+ pinctrl_i2c4_default: i2c4_default {
+ function = "I2C4";
+ groups = "I2C4";
+ };
- pinctrl_nri3_default: nri3_default {
- function = "NRI3";
- groups = "NRI3";
- };
+ pinctrl_i2c5_default: i2c5_default {
+ function = "I2C5";
+ groups = "I2C5";
+ };
- pinctrl_nri4_default: nri4_default {
- function = "NRI4";
- groups = "NRI4";
- };
+ pinctrl_i2c6_default: i2c6_default {
+ function = "I2C6";
+ groups = "I2C6";
+ };
- pinctrl_nrts1_default: nrts1_default {
- function = "NRTS1";
- groups = "NRTS1";
- };
+ pinctrl_i2c7_default: i2c7_default {
+ function = "I2C7";
+ groups = "I2C7";
+ };
- pinctrl_nrts2_default: nrts2_default {
- function = "NRTS2";
- groups = "NRTS2";
- };
+ pinctrl_i2c8_default: i2c8_default {
+ function = "I2C8";
+ groups = "I2C8";
+ };
- pinctrl_nrts3_default: nrts3_default {
- function = "NRTS3";
- groups = "NRTS3";
- };
+ pinctrl_i2c9_default: i2c9_default {
+ function = "I2C9";
+ groups = "I2C9";
+ };
- pinctrl_nrts4_default: nrts4_default {
- function = "NRTS4";
- groups = "NRTS4";
- };
+ pinctrl_lad0_default: lad0_default {
+ function = "LAD0";
+ groups = "LAD0";
+ };
- pinctrl_oscclk_default: oscclk_default {
- function = "OSCCLK";
- groups = "OSCCLK";
- };
+ pinctrl_lad1_default: lad1_default {
+ function = "LAD1";
+ groups = "LAD1";
+ };
- pinctrl_pewake_default: pewake_default {
- function = "PEWAKE";
- groups = "PEWAKE";
- };
+ pinctrl_lad2_default: lad2_default {
+ function = "LAD2";
+ groups = "LAD2";
+ };
- pinctrl_pnor_default: pnor_default {
- function = "PNOR";
- groups = "PNOR";
- };
+ pinctrl_lad3_default: lad3_default {
+ function = "LAD3";
+ groups = "LAD3";
+ };
- pinctrl_pwm0_default: pwm0_default {
- function = "PWM0";
- groups = "PWM0";
- };
+ pinctrl_lclk_default: lclk_default {
+ function = "LCLK";
+ groups = "LCLK";
+ };
- pinctrl_pwm1_default: pwm1_default {
- function = "PWM1";
- groups = "PWM1";
- };
+ pinctrl_lframe_default: lframe_default {
+ function = "LFRAME";
+ groups = "LFRAME";
+ };
- pinctrl_pwm2_default: pwm2_default {
- function = "PWM2";
- groups = "PWM2";
- };
+ pinctrl_lpchc_default: lpchc_default {
+ function = "LPCHC";
+ groups = "LPCHC";
+ };
- pinctrl_pwm3_default: pwm3_default {
- function = "PWM3";
- groups = "PWM3";
- };
+ pinctrl_lpcpd_default: lpcpd_default {
+ function = "LPCPD";
+ groups = "LPCPD";
+ };
- pinctrl_pwm4_default: pwm4_default {
- function = "PWM4";
- groups = "PWM4";
- };
+ pinctrl_lpcplus_default: lpcplus_default {
+ function = "LPCPLUS";
+ groups = "LPCPLUS";
+ };
- pinctrl_pwm5_default: pwm5_default {
- function = "PWM5";
- groups = "PWM5";
- };
+ pinctrl_lpcpme_default: lpcpme_default {
+ function = "LPCPME";
+ groups = "LPCPME";
+ };
- pinctrl_pwm6_default: pwm6_default {
- function = "PWM6";
- groups = "PWM6";
- };
+ pinctrl_lpcrst_default: lpcrst_default {
+ function = "LPCRST";
+ groups = "LPCRST";
+ };
- pinctrl_pwm7_default: pwm7_default {
- function = "PWM7";
- groups = "PWM7";
- };
+ pinctrl_lpcsmi_default: lpcsmi_default {
+ function = "LPCSMI";
+ groups = "LPCSMI";
+ };
- pinctrl_rgmii1_default: rgmii1_default {
- function = "RGMII1";
- groups = "RGMII1";
- };
+ pinctrl_lsirq_default: lsirq_default {
+ function = "LSIRQ";
+ groups = "LSIRQ";
+ };
- pinctrl_rgmii2_default: rgmii2_default {
- function = "RGMII2";
- groups = "RGMII2";
- };
+ pinctrl_mac1link_default: mac1link_default {
+ function = "MAC1LINK";
+ groups = "MAC1LINK";
+ };
- pinctrl_rmii1_default: rmii1_default {
- function = "RMII1";
- groups = "RMII1";
- };
+ pinctrl_mac2link_default: mac2link_default {
+ function = "MAC2LINK";
+ groups = "MAC2LINK";
+ };
- pinctrl_rmii2_default: rmii2_default {
- function = "RMII2";
- groups = "RMII2";
- };
+ pinctrl_mdio1_default: mdio1_default {
+ function = "MDIO1";
+ groups = "MDIO1";
+ };
- pinctrl_rxd1_default: rxd1_default {
- function = "RXD1";
- groups = "RXD1";
- };
+ pinctrl_mdio2_default: mdio2_default {
+ function = "MDIO2";
+ groups = "MDIO2";
+ };
- pinctrl_rxd2_default: rxd2_default {
- function = "RXD2";
- groups = "RXD2";
- };
+ pinctrl_ncts1_default: ncts1_default {
+ function = "NCTS1";
+ groups = "NCTS1";
+ };
- pinctrl_rxd3_default: rxd3_default {
- function = "RXD3";
- groups = "RXD3";
- };
+ pinctrl_ncts2_default: ncts2_default {
+ function = "NCTS2";
+ groups = "NCTS2";
+ };
- pinctrl_rxd4_default: rxd4_default {
- function = "RXD4";
- groups = "RXD4";
- };
+ pinctrl_ncts3_default: ncts3_default {
+ function = "NCTS3";
+ groups = "NCTS3";
+ };
- pinctrl_salt1_default: salt1_default {
- function = "SALT1";
- groups = "SALT1";
- };
+ pinctrl_ncts4_default: ncts4_default {
+ function = "NCTS4";
+ groups = "NCTS4";
+ };
- pinctrl_salt10_default: salt10_default {
- function = "SALT10";
- groups = "SALT10";
- };
+ pinctrl_ndcd1_default: ndcd1_default {
+ function = "NDCD1";
+ groups = "NDCD1";
+ };
- pinctrl_salt11_default: salt11_default {
- function = "SALT11";
- groups = "SALT11";
- };
+ pinctrl_ndcd2_default: ndcd2_default {
+ function = "NDCD2";
+ groups = "NDCD2";
+ };
- pinctrl_salt12_default: salt12_default {
- function = "SALT12";
- groups = "SALT12";
- };
+ pinctrl_ndcd3_default: ndcd3_default {
+ function = "NDCD3";
+ groups = "NDCD3";
+ };
- pinctrl_salt13_default: salt13_default {
- function = "SALT13";
- groups = "SALT13";
- };
+ pinctrl_ndcd4_default: ndcd4_default {
+ function = "NDCD4";
+ groups = "NDCD4";
+ };
- pinctrl_salt14_default: salt14_default {
- function = "SALT14";
- groups = "SALT14";
- };
+ pinctrl_ndsr1_default: ndsr1_default {
+ function = "NDSR1";
+ groups = "NDSR1";
+ };
- pinctrl_salt2_default: salt2_default {
- function = "SALT2";
- groups = "SALT2";
- };
+ pinctrl_ndsr2_default: ndsr2_default {
+ function = "NDSR2";
+ groups = "NDSR2";
+ };
- pinctrl_salt3_default: salt3_default {
- function = "SALT3";
- groups = "SALT3";
- };
+ pinctrl_ndsr3_default: ndsr3_default {
+ function = "NDSR3";
+ groups = "NDSR3";
+ };
- pinctrl_salt4_default: salt4_default {
- function = "SALT4";
- groups = "SALT4";
- };
+ pinctrl_ndsr4_default: ndsr4_default {
+ function = "NDSR4";
+ groups = "NDSR4";
+ };
- pinctrl_salt5_default: salt5_default {
- function = "SALT5";
- groups = "SALT5";
- };
+ pinctrl_ndtr1_default: ndtr1_default {
+ function = "NDTR1";
+ groups = "NDTR1";
+ };
- pinctrl_salt6_default: salt6_default {
- function = "SALT6";
- groups = "SALT6";
- };
+ pinctrl_ndtr2_default: ndtr2_default {
+ function = "NDTR2";
+ groups = "NDTR2";
+ };
- pinctrl_salt7_default: salt7_default {
- function = "SALT7";
- groups = "SALT7";
- };
+ pinctrl_ndtr3_default: ndtr3_default {
+ function = "NDTR3";
+ groups = "NDTR3";
+ };
- pinctrl_salt8_default: salt8_default {
- function = "SALT8";
- groups = "SALT8";
- };
+ pinctrl_ndtr4_default: ndtr4_default {
+ function = "NDTR4";
+ groups = "NDTR4";
+ };
- pinctrl_salt9_default: salt9_default {
- function = "SALT9";
- groups = "SALT9";
- };
+ pinctrl_nri1_default: nri1_default {
+ function = "NRI1";
+ groups = "NRI1";
+ };
- pinctrl_scl1_default: scl1_default {
- function = "SCL1";
- groups = "SCL1";
- };
+ pinctrl_nri2_default: nri2_default {
+ function = "NRI2";
+ groups = "NRI2";
+ };
- pinctrl_scl2_default: scl2_default {
- function = "SCL2";
- groups = "SCL2";
- };
+ pinctrl_nri3_default: nri3_default {
+ function = "NRI3";
+ groups = "NRI3";
+ };
- pinctrl_sd1_default: sd1_default {
- function = "SD1";
- groups = "SD1";
- };
+ pinctrl_nri4_default: nri4_default {
+ function = "NRI4";
+ groups = "NRI4";
+ };
- pinctrl_sd2_default: sd2_default {
- function = "SD2";
- groups = "SD2";
- };
+ pinctrl_nrts1_default: nrts1_default {
+ function = "NRTS1";
+ groups = "NRTS1";
+ };
- pinctrl_sda1_default: sda1_default {
- function = "SDA1";
- groups = "SDA1";
- };
+ pinctrl_nrts2_default: nrts2_default {
+ function = "NRTS2";
+ groups = "NRTS2";
+ };
- pinctrl_sda2_default: sda2_default {
- function = "SDA2";
- groups = "SDA2";
- };
+ pinctrl_nrts3_default: nrts3_default {
+ function = "NRTS3";
+ groups = "NRTS3";
+ };
- pinctrl_sgps1_default: sgps1_default {
- function = "SGPS1";
- groups = "SGPS1";
- };
+ pinctrl_nrts4_default: nrts4_default {
+ function = "NRTS4";
+ groups = "NRTS4";
+ };
- pinctrl_sgps2_default: sgps2_default {
- function = "SGPS2";
- groups = "SGPS2";
- };
+ pinctrl_oscclk_default: oscclk_default {
+ function = "OSCCLK";
+ groups = "OSCCLK";
+ };
- pinctrl_sioonctrl_default: sioonctrl_default {
- function = "SIOONCTRL";
- groups = "SIOONCTRL";
- };
+ pinctrl_pewake_default: pewake_default {
+ function = "PEWAKE";
+ groups = "PEWAKE";
+ };
- pinctrl_siopbi_default: siopbi_default {
- function = "SIOPBI";
- groups = "SIOPBI";
- };
+ pinctrl_pnor_default: pnor_default {
+ function = "PNOR";
+ groups = "PNOR";
+ };
- pinctrl_siopbo_default: siopbo_default {
- function = "SIOPBO";
- groups = "SIOPBO";
- };
+ pinctrl_pwm0_default: pwm0_default {
+ function = "PWM0";
+ groups = "PWM0";
+ };
- pinctrl_siopwreq_default: siopwreq_default {
- function = "SIOPWREQ";
- groups = "SIOPWREQ";
- };
+ pinctrl_pwm1_default: pwm1_default {
+ function = "PWM1";
+ groups = "PWM1";
+ };
- pinctrl_siopwrgd_default: siopwrgd_default {
- function = "SIOPWRGD";
- groups = "SIOPWRGD";
- };
+ pinctrl_pwm2_default: pwm2_default {
+ function = "PWM2";
+ groups = "PWM2";
+ };
- pinctrl_sios3_default: sios3_default {
- function = "SIOS3";
- groups = "SIOS3";
- };
+ pinctrl_pwm3_default: pwm3_default {
+ function = "PWM3";
+ groups = "PWM3";
+ };
- pinctrl_sios5_default: sios5_default {
- function = "SIOS5";
- groups = "SIOS5";
- };
+ pinctrl_pwm4_default: pwm4_default {
+ function = "PWM4";
+ groups = "PWM4";
+ };
- pinctrl_siosci_default: siosci_default {
- function = "SIOSCI";
- groups = "SIOSCI";
- };
+ pinctrl_pwm5_default: pwm5_default {
+ function = "PWM5";
+ groups = "PWM5";
+ };
- pinctrl_spi1_default: spi1_default {
- function = "SPI1";
- groups = "SPI1";
- };
+ pinctrl_pwm6_default: pwm6_default {
+ function = "PWM6";
+ groups = "PWM6";
+ };
- pinctrl_spi1cs1_default: spi1cs1_default {
- function = "SPI1CS1";
- groups = "SPI1CS1";
- };
+ pinctrl_pwm7_default: pwm7_default {
+ function = "PWM7";
+ groups = "PWM7";
+ };
- pinctrl_spi1debug_default: spi1debug_default {
- function = "SPI1DEBUG";
- groups = "SPI1DEBUG";
- };
+ pinctrl_rgmii1_default: rgmii1_default {
+ function = "RGMII1";
+ groups = "RGMII1";
+ };
- pinctrl_spi1passthru_default: spi1passthru_default {
- function = "SPI1PASSTHRU";
- groups = "SPI1PASSTHRU";
- };
+ pinctrl_rgmii2_default: rgmii2_default {
+ function = "RGMII2";
+ groups = "RGMII2";
+ };
- pinctrl_spi2ck_default: spi2ck_default {
- function = "SPI2CK";
- groups = "SPI2CK";
- };
+ pinctrl_rmii1_default: rmii1_default {
+ function = "RMII1";
+ groups = "RMII1";
+ };
- pinctrl_spi2cs0_default: spi2cs0_default {
- function = "SPI2CS0";
- groups = "SPI2CS0";
- };
+ pinctrl_rmii2_default: rmii2_default {
+ function = "RMII2";
+ groups = "RMII2";
+ };
- pinctrl_spi2cs1_default: spi2cs1_default {
- function = "SPI2CS1";
- groups = "SPI2CS1";
- };
+ pinctrl_rxd1_default: rxd1_default {
+ function = "RXD1";
+ groups = "RXD1";
+ };
- pinctrl_spi2miso_default: spi2miso_default {
- function = "SPI2MISO";
- groups = "SPI2MISO";
- };
+ pinctrl_rxd2_default: rxd2_default {
+ function = "RXD2";
+ groups = "RXD2";
+ };
- pinctrl_spi2mosi_default: spi2mosi_default {
- function = "SPI2MOSI";
- groups = "SPI2MOSI";
- };
+ pinctrl_rxd3_default: rxd3_default {
+ function = "RXD3";
+ groups = "RXD3";
+ };
- pinctrl_timer3_default: timer3_default {
- function = "TIMER3";
- groups = "TIMER3";
- };
+ pinctrl_rxd4_default: rxd4_default {
+ function = "RXD4";
+ groups = "RXD4";
+ };
- pinctrl_timer4_default: timer4_default {
- function = "TIMER4";
- groups = "TIMER4";
- };
+ pinctrl_salt1_default: salt1_default {
+ function = "SALT1";
+ groups = "SALT1";
+ };
- pinctrl_timer5_default: timer5_default {
- function = "TIMER5";
- groups = "TIMER5";
- };
+ pinctrl_salt10_default: salt10_default {
+ function = "SALT10";
+ groups = "SALT10";
+ };
- pinctrl_timer6_default: timer6_default {
- function = "TIMER6";
- groups = "TIMER6";
- };
+ pinctrl_salt11_default: salt11_default {
+ function = "SALT11";
+ groups = "SALT11";
+ };
- pinctrl_timer7_default: timer7_default {
- function = "TIMER7";
- groups = "TIMER7";
- };
+ pinctrl_salt12_default: salt12_default {
+ function = "SALT12";
+ groups = "SALT12";
+ };
- pinctrl_timer8_default: timer8_default {
- function = "TIMER8";
- groups = "TIMER8";
- };
+ pinctrl_salt13_default: salt13_default {
+ function = "SALT13";
+ groups = "SALT13";
+ };
- pinctrl_txd1_default: txd1_default {
- function = "TXD1";
- groups = "TXD1";
- };
+ pinctrl_salt14_default: salt14_default {
+ function = "SALT14";
+ groups = "SALT14";
+ };
- pinctrl_txd2_default: txd2_default {
- function = "TXD2";
- groups = "TXD2";
- };
+ pinctrl_salt2_default: salt2_default {
+ function = "SALT2";
+ groups = "SALT2";
+ };
- pinctrl_txd3_default: txd3_default {
- function = "TXD3";
- groups = "TXD3";
- };
+ pinctrl_salt3_default: salt3_default {
+ function = "SALT3";
+ groups = "SALT3";
+ };
- pinctrl_txd4_default: txd4_default {
- function = "TXD4";
- groups = "TXD4";
- };
+ pinctrl_salt4_default: salt4_default {
+ function = "SALT4";
+ groups = "SALT4";
+ };
- pinctrl_uart6_default: uart6_default {
- function = "UART6";
- groups = "UART6";
- };
+ pinctrl_salt5_default: salt5_default {
+ function = "SALT5";
+ groups = "SALT5";
+ };
- pinctrl_usbcki_default: usbcki_default {
- function = "USBCKI";
- groups = "USBCKI";
- };
+ pinctrl_salt6_default: salt6_default {
+ function = "SALT6";
+ groups = "SALT6";
+ };
- pinctrl_vgabiosrom_default: vgabiosrom_default {
- function = "VGABIOSROM";
- groups = "VGABIOSROM";
- };
+ pinctrl_salt7_default: salt7_default {
+ function = "SALT7";
+ groups = "SALT7";
+ };
- pinctrl_vgahs_default: vgahs_default {
- function = "VGAHS";
- groups = "VGAHS";
- };
+ pinctrl_salt8_default: salt8_default {
+ function = "SALT8";
+ groups = "SALT8";
+ };
- pinctrl_vgavs_default: vgavs_default {
- function = "VGAVS";
- groups = "VGAVS";
- };
+ pinctrl_salt9_default: salt9_default {
+ function = "SALT9";
+ groups = "SALT9";
+ };
- pinctrl_vpi24_default: vpi24_default {
- function = "VPI24";
- groups = "VPI24";
- };
+ pinctrl_scl1_default: scl1_default {
+ function = "SCL1";
+ groups = "SCL1";
+ };
- pinctrl_vpo_default: vpo_default {
- function = "VPO";
- groups = "VPO";
- };
+ pinctrl_scl2_default: scl2_default {
+ function = "SCL2";
+ groups = "SCL2";
+ };
- pinctrl_wdtrst1_default: wdtrst1_default {
- function = "WDTRST1";
- groups = "WDTRST1";
- };
+ pinctrl_sd1_default: sd1_default {
+ function = "SD1";
+ groups = "SD1";
+ };
- pinctrl_wdtrst2_default: wdtrst2_default {
- function = "WDTRST2";
- groups = "WDTRST2";
- };
+ pinctrl_sd2_default: sd2_default {
+ function = "SD2";
+ groups = "SD2";
+ };
- };
+ pinctrl_sda1_default: sda1_default {
+ function = "SDA1";
+ groups = "SDA1";
+ };
- };
+ pinctrl_sda2_default: sda2_default {
+ function = "SDA2";
+ groups = "SDA2";
+ };
- gfx: display@1e6e6000 {
- compatible = "aspeed,ast2500-gfx", "syscon";
- reg = <0x1e6e6000 0x1000>;
- reg-io-width = <4>;
- };
+ pinctrl_sgps1_default: sgps1_default {
+ function = "SGPS1";
+ groups = "SGPS1";
+ };
- sram@1e720000 {
- compatible = "mmio-sram";
- reg = <0x1e720000 0x9000>; // 36K
- };
+ pinctrl_sgps2_default: sgps2_default {
+ function = "SGPS2";
+ groups = "SGPS2";
+ };
- gpio: gpio@1e780000 {
- #gpio-cells = <2>;
- gpio-controller;
- compatible = "aspeed,ast2500-gpio";
- reg = <0x1e780000 0x1000>;
- interrupts = <20>;
- gpio-ranges = <&pinctrl 0 0 220>;
- interrupt-controller;
- };
+ pinctrl_sioonctrl_default: sioonctrl_default {
+ function = "SIOONCTRL";
+ groups = "SIOONCTRL";
+ };
- timer: timer@1e782000 {
- /* This timer is a Faraday FTTMR010 derivative */
- compatible = "aspeed,ast2400-timer";
- reg = <0x1e782000 0x90>;
- interrupts = <16 17 18 35 36 37 38 39>;
- clocks = <&clk_apb>;
- clock-names = "PCLK";
- };
+ pinctrl_siopbi_default: siopbi_default {
+ function = "SIOPBI";
+ groups = "SIOPBI";
+ };
+ pinctrl_siopbo_default: siopbo_default {
+ function = "SIOPBO";
+ groups = "SIOPBO";
+ };
- wdt1: wdt@1e785000 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785000 0x20>;
- interrupts = <27>;
- };
+ pinctrl_siopwreq_default: siopwreq_default {
+ function = "SIOPWREQ";
+ groups = "SIOPWREQ";
+ };
- wdt2: wdt@1e785020 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785020 0x20>;
- interrupts = <27>;
- status = "disabled";
- };
+ pinctrl_siopwrgd_default: siopwrgd_default {
+ function = "SIOPWRGD";
+ groups = "SIOPWRGD";
+ };
- wdt3: wdt@1e785040 {
- compatible = "aspeed,ast2500-wdt";
- reg = <0x1e785040 0x20>;
- status = "disabled";
- };
+ pinctrl_sios3_default: sios3_default {
+ function = "SIOS3";
+ groups = "SIOS3";
+ };
- uart1: serial@1e783000 {
- compatible = "ns16550a";
- reg = <0x1e783000 0x1000>;
- reg-shift = <2>;
- interrupts = <9>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_sios5_default: sios5_default {
+ function = "SIOS5";
+ groups = "SIOS5";
+ };
- lpc: lpc@1e789000 {
- compatible = "aspeed,ast2500-lpc", "simple-mfd";
- reg = <0x1e789000 0x1000>;
+ pinctrl_siosci_default: siosci_default {
+ function = "SIOSCI";
+ groups = "SIOSCI";
+ };
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x1e789000 0x1000>;
+ pinctrl_spi1_default: spi1_default {
+ function = "SPI1";
+ groups = "SPI1";
+ };
- lpc_bmc: lpc-bmc@0 {
- compatible = "aspeed,ast2500-lpc-bmc";
- reg = <0x0 0x80>;
- };
+ pinctrl_spi1cs1_default: spi1cs1_default {
+ function = "SPI1CS1";
+ groups = "SPI1CS1";
+ };
- lpc_host: lpc-host@80 {
- compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
- reg = <0x80 0x1e0>;
+ pinctrl_spi1debug_default: spi1debug_default {
+ function = "SPI1DEBUG";
+ groups = "SPI1DEBUG";
+ };
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x80 0x1e0>;
+ pinctrl_spi1passthru_default: spi1passthru_default {
+ function = "SPI1PASSTHRU";
+ groups = "SPI1PASSTHRU";
+ };
- reg-io-width = <4>;
+ pinctrl_spi2ck_default: spi2ck_default {
+ function = "SPI2CK";
+ groups = "SPI2CK";
+ };
- lhc: lhc@20 {
- compatible = "aspeed,ast2500-lhc";
- reg = <0x20 0x24 0x48 0x8>;
- };
- };
- };
+ pinctrl_spi2cs0_default: spi2cs0_default {
+ function = "SPI2CS0";
+ groups = "SPI2CS0";
+ };
- uart2: serial@1e78d000 {
- compatible = "ns16550a";
- reg = <0x1e78d000 0x1000>;
- reg-shift = <2>;
- interrupts = <32>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2cs1_default: spi2cs1_default {
+ function = "SPI2CS1";
+ groups = "SPI2CS1";
+ };
- uart3: serial@1e78e000 {
- compatible = "ns16550a";
- reg = <0x1e78e000 0x1000>;
- reg-shift = <2>;
- interrupts = <33>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2miso_default: spi2miso_default {
+ function = "SPI2MISO";
+ groups = "SPI2MISO";
+ };
- uart4: serial@1e78f000 {
- compatible = "ns16550a";
- reg = <0x1e78f000 0x1000>;
- reg-shift = <2>;
- interrupts = <34>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_spi2mosi_default: spi2mosi_default {
+ function = "SPI2MOSI";
+ groups = "SPI2MOSI";
+ };
- uart5: serial@1e784000 {
- compatible = "ns16550a";
- reg = <0x1e784000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- current-speed = <38400>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_timer3_default: timer3_default {
+ function = "TIMER3";
+ groups = "TIMER3";
+ };
- uart6: serial@1e787000 {
- compatible = "ns16550a";
- reg = <0x1e787000 0x1000>;
- reg-shift = <2>;
- interrupts = <10>;
- clocks = <&clk_uart>;
- no-loopback-test;
- status = "disabled";
- };
+ pinctrl_timer4_default: timer4_default {
+ function = "TIMER4";
+ groups = "TIMER4";
+ };
- adc: adc@1e6e9000 {
- compatible = "aspeed,ast2500-adc";
- reg = <0x1e6e9000 0xb0>;
- clocks = <&clk_apb>;
- #io-channel-cells = <1>;
- status = "disabled";
- };
- };
+ pinctrl_timer5_default: timer5_default {
+ function = "TIMER5";
+ groups = "TIMER5";
+ };
+
+ pinctrl_timer6_default: timer6_default {
+ function = "TIMER6";
+ groups = "TIMER6";
+ };
+
+ pinctrl_timer7_default: timer7_default {
+ function = "TIMER7";
+ groups = "TIMER7";
+ };
+
+ pinctrl_timer8_default: timer8_default {
+ function = "TIMER8";
+ groups = "TIMER8";
+ };
+
+ pinctrl_txd1_default: txd1_default {
+ function = "TXD1";
+ groups = "TXD1";
+ };
+
+ pinctrl_txd2_default: txd2_default {
+ function = "TXD2";
+ groups = "TXD2";
+ };
+
+ pinctrl_txd3_default: txd3_default {
+ function = "TXD3";
+ groups = "TXD3";
+ };
+
+ pinctrl_txd4_default: txd4_default {
+ function = "TXD4";
+ groups = "TXD4";
+ };
+
+ pinctrl_uart6_default: uart6_default {
+ function = "UART6";
+ groups = "UART6";
+ };
+
+ pinctrl_usbcki_default: usbcki_default {
+ function = "USBCKI";
+ groups = "USBCKI";
+ };
+
+ pinctrl_vgabiosrom_default: vgabiosrom_default {
+ function = "VGABIOSROM";
+ groups = "VGABIOSROM";
+ };
+
+ pinctrl_vgahs_default: vgahs_default {
+ function = "VGAHS";
+ groups = "VGAHS";
+ };
+
+ pinctrl_vgavs_default: vgavs_default {
+ function = "VGAVS";
+ groups = "VGAVS";
+ };
+
+ pinctrl_vpi24_default: vpi24_default {
+ function = "VPI24";
+ groups = "VPI24";
+ };
+
+ pinctrl_vpo_default: vpo_default {
+ function = "VPO";
+ groups = "VPO";
+ };
+
+ pinctrl_wdtrst1_default: wdtrst1_default {
+ function = "WDTRST1";
+ groups = "WDTRST1";
+ };
+
+ pinctrl_wdtrst2_default: wdtrst2_default {
+ function = "WDTRST2";
+ groups = "WDTRST2";
};
};
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree file for Arietta G25
* This device tree is minimal, to activate more peripherals, see:
};
};
- usb0: ohci@00600000 {
+ usb0: ohci@600000 {
status = "okay";
num-ports = <3>;
};
- usb1: ehci@00700000 {
+ usb1: ehci@700000 {
status = "okay";
};
};
};
ahb {
- usb0: gadget@00300000 {
+ usb0: gadget@300000 {
atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
&pioA PIN_PB10 GPIO_ACTIVE_HIGH
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sdmmc1_default>;
status = "okay"; /* conflict with qspi0 */
+ vqmmc-supply = <&vdd_3v3_reg>;
+ vmmc-supply = <&vdd_3v3_reg>;
};
apb {
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
regulator-always-on;
};
};
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
};
};
pwm0: pwm@f802c000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+ status = "disabled"; /* conflict with leds */
};
flx0: flexcom@f8034000 {
vddana-supply = <&vdd_3v3_lp_reg>;
vref-supply = <&vdd_3v3_lp_reg>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_adc_default>;
+ pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
status = "okay";
};
bias-disable;
};
+ /*
+ * The ADTRG pin can work on any edge type.
+ * In here it's being pulled up, so need to
+ * connect it to ground to get an edge e.g.
+ * Trigger can be configured on falling, rise
+ * or any edge, and the pull-up can be changed
+ * to pull-down or left floating according to
+ * needs.
+ */
+ pinctrl_adtrg_default: adtrg_default {
+ pinmux = <PIN_PD31__ADTRG>;
+ bias-pull-up;
+ };
+
pinctrl_charger_chglev: charger_chglev {
pinmux = <PIN_PA12__GPIO>;
bias-disable;
<PIN_PA7__SDMMC0_DAT5>,
<PIN_PA8__SDMMC0_DAT6>,
<PIN_PA9__SDMMC0_DAT7>;
- bias-pull-up;
+ bias-disable;
};
ck_cd_rstn_vddsel {
<PIN_PA19__SDMMC1_DAT1>,
<PIN_PA20__SDMMC1_DAT2>,
<PIN_PA21__SDMMC1_DAT3>;
- bias-pull-up;
+ bias-disable;
};
conf-ck_cd {
bias-disable;
};
+ pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+ pinmux = <PIN_PB5__PWMH2>,
+ <PIN_PB6__PWML2>;
+ bias-pull-up;
+ };
};
classd: classd@fc048000 {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
linux,code = <0x104>;
+ wakeup-source;
};
};
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_gpio_default>;
- status = "okay";
+ status = "okay"; /* conflict with pwm0 */
red {
label = "red";
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2837.dtsi"
#include "bcm2835-rpi.dtsi"
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ };
};
/* uart1 is mapped to the pin header */
+// SPDX-License-Identifier: GPL-2.0
/include/ "skeleton.dtsi"
#include <dt-bindings/gpio/gpio.h>
};
};
- thermal: thermal-diode@001c {
+ thermal: thermal-diode@1c {
compatible = "marvell,dove-thermal";
reg = <0x001c 0x0c>, <0x005c 0x08>;
};
- gate_clk: clock-gating-ctrl@0038 {
+ gate_clk: clock-gating-ctrl@38 {
compatible = "marvell,dove-gating-clock";
reg = <0x0038 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
- divider_clk: core-clock@0064 {
+ divider_clk: core-clock@64 {
compatible = "marvell,dove-divider-clock";
reg = <0x0064 0x8>;
#clock-cells = <1>;
};
- pinctrl: pin-ctrl@0200 {
+ pinctrl: pin-ctrl@200 {
compatible = "marvell,dove-pinctrl";
reg = <0x0200 0x14>,
<0x0440 0x04>;
};
};
- core_clk: core-clocks@0214 {
+ core_clk: core-clocks@214 {
compatible = "marvell,dove-core-clock";
reg = <0x0214 0x4>;
#clock-cells = <1>;
};
- gpio0: gpio-ctrl@0400 {
+ gpio0: gpio-ctrl@400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
interrupts = <12>, <13>, <14>, <60>;
};
- gpio1: gpio-ctrl@0420 {
+ gpio1: gpio-ctrl@420 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree file for Cortina systems Gemini SoC
*/
groups = "idegrp";
};
};
+ tvc_default_pins: pinctrl-tvc {
+ mux {
+ function = "tvc";
+ groups = "tvcgrp";
+ };
+ };
};
};
watchdog@41000000 {
- compatible = "cortina,gemini-watchdog";
+ compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
reg = <0x41000000 0x1000>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
resets = <&syscon GEMINI_RESET_WDOG>;
clocks = <&syscon GEMINI_CLK_APB>;
+ clock-names = "PCLK";
};
uart0: serial@42000000 {
memcpy-bus-width = <32>;
#dma-cells = <2>;
};
+
+ display-controller@6a000000 {
+ compatible = "cortina,gemini-tvc", "faraday,tve200";
+ reg = <0x6a000000 0x1000>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_TVC>;
+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+ <&syscon GEMINI_CLK_TVC>;
+ clock-names = "PCLK", "TVE";
+ pinctrl-names = "default";
+ pinctrl-0 = <&tvc_default_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "imx28.dtsi"
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
VDDA-supply = <®_3p3v>;
+// SPDX-License-Identifier: GPL-2.0
/*
* SoC core Device Tree for the ARM Integrator platforms
*/
reg = <0x10000000 0x200>;
/* Use core module LED to indicate CPU load */
- led@0c.0 {
+ led@c.0 {
compatible = "register-bit-led";
offset = <0x0c>;
mask = <0x01>;
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
- led@04.0 {
+ led@4.0 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x01>;
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@04.1 {
+ led@4.1 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
- led@04.2 {
+ led@4.2 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
- led@04.3 {
+ led@4.3 {
compatible = "register-bit-led";
offset = <0x04>;
mask = <0x08>;
+// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree for the ARM Integrator/AP platform
*/
};
pci: pciv3@62000000 {
- compatible = "v3,v360epc-pci";
+ compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0x62000000 0x10000>;
+ /* Bridge registers and config access space */
+ reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
interrupt-parent = <&pic>;
interrupts = <17>; /* Bus error IRQ */
- ranges = <0x00000000 0 0x61000000 /* config space */
- 0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
- 0x01000000 0 0x0 /* I/O space */
- 0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
- 0x02000000 0 0x00000000 /* non-prefectable memory */
- 0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
- 0x42000000 0 0x10000000 /* prefetchable memory */
- 0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
+ clocks = <&pciclk>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
+ 0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+ 0x02000000 0 0x80000000 /* Core module alias memory */
+ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
interrupt-map-mask = <0xf800 0 0 0x7>;
interrupt-map = <
/* IDSEL 9 */
+// SPDX-License-Identifier: GPL-2.0
/ {
model = "QNAP TS219 family";
compatible = "qnap,ts219", "marvell,kirkwood";
spi-max-frequency = <20000000>;
mode = <0>;
- partition@0000000 {
+ partition@0 {
reg = <0x00000000 0x00080000>;
label = "U-Boot";
};
- partition@00200000 {
+ partition@200000 {
reg = <0x00200000 0x00200000>;
label = "Kernel";
};
- partition@00400000 {
+ partition@400000 {
reg = <0x00400000 0x00900000>;
label = "RootFS1";
};
- partition@00d00000 {
+ partition@d00000 {
reg = <0x00d00000 0x00300000>;
label = "RootFS2";
};
- partition@00040000 {
+ partition@40000 {
reg = <0x00080000 0x00040000>;
label = "U-Boot Config";
};
- partition@000c0000 {
+ partition@c0000 {
reg = <0x000c0000 0x00140000>;
label = "NAS Config";
};
+// SPDX-License-Identifier: GPL-2.0
/include/ "skeleton.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- nand: nand@012f {
+ nand: nand@12f {
#address-cells = <1>;
#size-cells = <1>;
cle = <0>;
status = "disabled";
};
- crypto_sram: sa-sram@0301 {
+ crypto_sram: sa-sram@301 {
compatible = "mmio-sram";
reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
clocks = <&gate_clk 17>;
+// SPDX-License-Identifier: GPL-2.0
#include "omap2420.dtsi"
/ {
reg = <0x80000000 0x8000000>; /* 128 MB */
};
+ chosen {
+ stdout-path = &uart3;
+ };
+
ocp {
i2c0 {
compatible = "i2c-cbus-gpio";
+// SPDX-License-Identifier: GPL-2.0
/*
* Common file for omap dpi panels with QVGA and reset pins
*
compatible = "sharp,ls037v7dw01";
label = "lcd";
power-supply = <&lcd_3v3>;
+ envdd-supply = <&lcd_3v3>;
port {
lcd_in: endpoint {
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "skeleton.dtsi"
clocks = <&gcc GSBI6_QUP_CLK>,
<&gcc GSBI6_H_CLK>;
clock-names = "core", "iface";
+ status = "disabled";
};
};
usb_hs1_phy: phy {
compatible = "qcom,usb-hs-phy-apq8064",
"qcom,usb-hs-phy";
- #phy-cells = <0>;
clocks = <&sleep_clk>, <&cxo_board>;
clock-names = "sleep", "ref";
resets = <&usb1 0>;
reset-names = "por";
+ #phy-cells = <0>;
};
};
};
dsi0_phy: dsi-phy@4700200 {
compatible = "qcom,dsi-phy-28nm-8960";
#clock-cells = <1>;
+ #phy-cells = <0>;
reg = <0x04700200 0x100>,
<0x04700300 0x200>,
clocks = <&mmcc HDMI_S_AHB_CLK>;
clock-names = "slave_iface_clk";
+ #phy-cells = <0>;
};
mdp: mdp@5100000 {
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
/include/ "skeleton.dtsi"
reg = <0x900000 0x4000>;
};
+ gsbi6: gsbi@16500000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <12>;
+ reg = <0x16500000 0x100>;
+ clocks = <&gcc GSBI6_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi6_serial: serial@16540000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16540000 0x1000>,
+ <0x16500000 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi6_i2c: i2c@16580000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16580000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ gsbi7: gsbi@16600000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <12>;
+ reg = <0x16600000 0x100>;
+ clocks = <&gcc GSBI7_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi7_serial: serial@16640000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16640000 0x1000>,
+ <0x16600000 0x1000>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ gsbi7_i2c: i2c@16680000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16680000 0x1000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
gsbi8: gsbi@19800000 {
compatible = "qcom,gsbi-v1.0.0";
#size-cells = <0>;
#io-channel-cells = <2>;
- vcoin: adc-channel@00 {
+ vcoin: adc-channel@0 {
reg = <0x00 0x00>;
};
- vbat: adc-channel@01 {
+ vbat: adc-channel@1 {
reg = <0x00 0x01>;
};
- dcin: adc-channel@02 {
+ dcin: adc-channel@2 {
reg = <0x00 0x02>;
};
- ichg: adc-channel@03 {
+ ichg: adc-channel@3 {
reg = <0x00 0x03>;
};
- vph_pwr: adc-channel@04 {
+ vph_pwr: adc-channel@4 {
reg = <0x00 0x04>;
};
- usb_vbus: adc-channel@0a {
+ usb_vbus: adc-channel@a {
reg = <0x00 0x0a>;
};
- die_temp: adc-channel@0b {
+ die_temp: adc-channel@b {
reg = <0x00 0x0b>;
};
- ref_625mv: adc-channel@0c {
+ ref_625mv: adc-channel@c {
reg = <0x00 0x0c>;
};
- ref_1250mv: adc-channel@0d {
+ ref_1250mv: adc-channel@d {
reg = <0x00 0x0d>;
};
- ref_325mv: adc-channel@0e {
+ ref_325mv: adc-channel@e {
reg = <0x00 0x0e>;
};
- ref_muxoff: adc-channel@0f {
+ ref_muxoff: adc-channel@f {
reg = <0x00 0x0f>;
};
};
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#size-cells = <1>;
ranges;
- mpss@08000000 {
+ mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
- mba@00d100000 {
+ mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
- reserved@0d200000 {
+ reserved@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
- adsp_region: adsp@0dc00000 {
+ adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
- venus@0f500000 {
+ venus@f500000 {
reg = <0x0f500000 0x500000>;
no-map;
};
no-map;
};
- tz@0fc00000 {
+ tz@fc00000 {
reg = <0x0fc00000 0x160000>;
no-map;
};
- rfsa@0fd60000 {
+ rfsa@fd60000 {
reg = <0x0fd60000 0x20000>;
no-map;
};
- rmtfs@0fd80000 {
+ rmtfs@fd80000 {
reg = <0x0fd80000 0x180000>;
no-map;
};
status = "disabled";
};
+ sdhci@f9864900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+ <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC3_APPS_CLK>,
+ <&gcc GCC_SDCC3_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ status = "disabled";
+ };
+
sdhci@f98a4900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
};
};
- ns_sram: sram@00200000 {
+ ns_sram: sram@200000 {
compatible = "mmio-sram";
reg = <0x00200000 0x20000>;
};
#size-cells = <1>;
ranges;
- nfc_sram: sram@00100000 {
+ nfc_sram: sram@100000 {
compatible = "mmio-sram";
no-memory-wc;
reg = <0x00100000 0x2400>;
};
- usb0: gadget@00300000 {
+ usb0: gadget@300000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,sama5d3-udc";
};
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
- L2: cache-controller@00a00000 {
+ L2: cache-controller@a00000 {
compatible = "arm,pl310-cache";
reg = <0x00a00000 0x1000>;
interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
atmel,min-sample-rate-hz = <200000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
+ atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
- #include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+ #include <dt-bindings/pinctrl/stm32-pinfunc.h>
#include <dt-bindings/clock/stm32fx-clock.h>
#include <dt-bindings/mfd/stm32f7-rcc.h>
status = "disabled";
};
+ timers2: timers@40000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@1 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+ };
+
timer3: timer@40000400 {
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
status = "disabled";
};
+ timers3: timers@40000400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@2 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
timer4: timer@40000800 {
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
status = "disabled";
};
+ timers4: timers@40000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@3 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <3>;
+ status = "disabled";
+ };
+ };
+
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
+ timers5: timers@40000c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@4 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <4>;
+ status = "disabled";
+ };
+ };
+
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
status = "disabled";
};
+ timers6: timers@40001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@5 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <5>;
+ status = "disabled";
+ };
+ };
+
timer7: timer@40001400 {
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
status = "disabled";
};
+ timers7: timers@40001400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+ clock-names = "int";
+ status = "disabled";
+
+ timer@6 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <6>;
+ status = "disabled";
+ };
+ };
+
+ timers12: timers@40001800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@11 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <11>;
+ status = "disabled";
+ };
+ };
+
+ timers13: timers@40001c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers14: timers@40002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
rtc: rtc@40002800 {
compatible = "st,stm32-rtc";
reg = <0x40002800 0x400>;
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 1 CLK_USART2>;
};
usart3: serial@40004800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 1 CLK_USART3>;
status = "disabled";
};
+ i2c1: i2c@40005400 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x40005400 0x400>;
+ interrupts = <31>,
+ <32>;
+ resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+ clocks = <&rcc 1 CLK_I2C1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
cec: cec@40006c00 {
compatible = "st,stm32-cec";
reg = <0x40006C00 0x400>;
};
usart7: serial@40007800 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 1 CLK_UART7>;
};
usart8: serial@40007c00 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 1 CLK_UART8>;
status = "disabled";
};
+ timers1: timers@40010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@0 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+ };
+
+ timers8: timers@40010400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@7 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 1 CLK_USART1>;
};
usart6: serial@40011400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 1 CLK_USART6>;
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
+ timers9: timers@40014000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+
+ timer@8 {
+ compatible = "st,stm32-timer-trigger";
+ reg = <8>;
+ status = "disabled";
+ };
+ };
+
+ timers10: timers@40014400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
+ timers11: timers@40014800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-timers";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+ clock-names = "int";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm";
+ status = "disabled";
+ };
+ };
+
pwrcfg: power-config@40007000 {
compatible = "syscon";
reg = <0x40007000 0x400>;
cec_pins_a: cec@0 {
pins {
- pinmux = <STM32F746_PA15_FUNC_HDMI_CEC>;
+ pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
slew-rate = <0>;
drive-open-drain;
bias-disable;
usart1_pins_a: usart1@0 {
pins1 {
- pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
bias-disable;
};
};
usart1_pins_b: usart1@1 {
pins1 {
- pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
- pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
+ pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_b: i2c1@0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+ <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg-hs@0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+ <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+ <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+ <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+ <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+ <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+ <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+ <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+ <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+ <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+ <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+ <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_hs_pins_b: usbotg-hs@1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+ <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+ <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+ <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+ <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+ <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+ <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+ <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+ <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+ <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+ <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+ <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ usbotg_fs_pins_a: usbotg-fs@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+ <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+ <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
};
};
};
st,mem2mem;
status = "disabled";
};
+
+ usbotg_hs: usb@40040000 {
+ compatible = "st,stm32f7-hsotg";
+ reg = <0x40040000 0x40000>;
+ interrupts = <77>;
+ clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ usbotg_fs: usb@50000000 {
+ compatible = "st,stm32f4x9-fsotg";
+ reg = <0x50000000 0x40000>;
+ interrupts = <67>;
+ clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+ clock-names = "otg";
+ status = "disabled";
+ };
};
};
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
+ #include <dt-bindings/clock/stm32h7-clks.h>
+ #include <dt-bindings/mfd/stm32h7-rcc.h>
/ {
clocks {
clock-frequency = <0>;
};
- timer_clk: timer-clk {
+ clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <125000000>;
+ clock-frequency = <32768>;
+ };
+
+ clk_i2s: i2s_ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
};
};
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
- clocks = <&timer_clk>;
+ clocks = <&rcc TIM5_CK>;
+ };
+
+ lptimer1: timer@40002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x40002400 0x400>;
+ clocks = <&rcc LPTIM1_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@0 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <0>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
};
usart2: serial@40004400 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
status = "disabled";
- clocks = <&timer_clk>;
+ clocks = <&rcc USART2_CK>;
};
dac: dac@40007400 {
compatible = "st,stm32h7-dac-core";
reg = <0x40007400 0x400>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DAC12_CK>;
clock-names = "pclk";
#address-cells = <1>;
#size-cells = <0>;
};
usart1: serial@40011000 {
- compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ compatible = "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
status = "disabled";
- clocks = <&timer_clk>;
-
+ clocks = <&rcc USART1_CK>;
};
dma1: dma@40020000 {
<16>,
<17>,
<47>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DMA1_CK>;
#dma-cells = <4>;
st,mem2mem;
+ dma-requests = <8>;
status = "disabled";
};
<68>,
<69>,
<70>;
- clocks = <&timer_clk>;
+ clocks = <&rcc DMA2_CK>;
#dma-cells = <4>;
st,mem2mem;
+ dma-requests = <8>;
status = "disabled";
};
+ dmamux1: dma-router@40020800 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x40020800 0x1c>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ dma-requests = <128>;
+ dma-masters = <&dma1 &dma2>;
+ clocks = <&rcc DMA1_CK>;
+ };
+
adc_12: adc@40022000 {
compatible = "st,stm32h7-adc-core";
reg = <0x40022000 0x400>;
interrupts = <18>;
- clocks = <&timer_clk>;
+ clocks = <&rcc ADC12_CK>;
clock-names = "bus";
interrupt-controller;
#interrupt-cells = <1>;
};
};
+ mdma1: dma@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&rcc MDMA_CK>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ };
+
+ lptimer2: timer@58002400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002400 0x400>;
+ clocks = <&rcc LPTIM2_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@1 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <1>;
+ status = "disabled";
+ };
+
+ counter {
+ compatible = "st,stm32-lptimer-counter";
+ status = "disabled";
+ };
+ };
+
+ lptimer3: timer@58002800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002800 0x400>;
+ clocks = <&rcc LPTIM3_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+
+ trigger@2 {
+ compatible = "st,stm32-lptimer-trigger";
+ reg = <2>;
+ status = "disabled";
+ };
+ };
+
+ lptimer4: timer@58002c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58002c00 0x400>;
+ clocks = <&rcc LPTIM4_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+ };
+
+ lptimer5: timer@58003000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "st,stm32-lptimer";
+ reg = <0x58003000 0x400>;
+ clocks = <&rcc LPTIM5_CK>;
+ clock-names = "mux";
+ status = "disabled";
+
+ pwm {
+ compatible = "st,stm32-pwm-lp";
+ status = "disabled";
+ };
+ };
+
+ vrefbuf: regulator@58003C00 {
+ compatible = "st,stm32-vrefbuf";
+ reg = <0x58003C00 0x8>;
+ clocks = <&rcc VREF_CK>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2500000>;
+ status = "disabled";
+ };
+
+ rcc: reset-clock-controller@58024400 {
+ compatible = "st,stm32h743-rcc", "st,stm32-rcc";
+ reg = <0x58024400 0x400>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s>;
+ st,syscfg = <&pwrcfg>;
+ };
+
+ pwrcfg: power-config@58024800 {
+ compatible = "syscon";
+ reg = <0x58024800 0x400>;
+ };
+
adc_3: adc@58026000 {
compatible = "st,stm32h7-adc-core";
reg = <0x58026000 0x400>;
interrupts = <127>;
- clocks = <&timer_clk>;
+ clocks = <&rcc ADC3_CK>;
clock-names = "bus";
interrupt-controller;
#interrupt-cells = <1>;
+// SPDX-License-Identifier: GPL-2.0
/*
* Based on Mans Rullgard's Tango3 DT
* https://github.com/mansr/linux-tangox
#address-cells = <1>;
#size-cells = <1>;
- irq0: irq0@000 {
+ irq0: irq0@0 {
reg = <0x000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/input.h>
};
};
+ cec@70015000 {
+ status = "okay";
+ };
+
gpu@0,57000000 {
/*
* Node left disabled on purpose - the bootloader will enable
+// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/memory/tegra124-mc.h>
nvidia,head = <1>;
};
- hdmi@54280000 {
+ hdmi: hdmi@54280000 {
compatible = "nvidia,tegra124-hdmi";
reg = <0x0 0x54280000 0x0 0x00040000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ cec@70015000 {
+ compatible = "nvidia,tegra124-cec";
+ reg = <0x0 0x70015000 0x0 0x00001000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_CEC>;
+ clock-names = "cec";
+ status = "disabled";
+ hdmi-phandle = <&hdmi>;
+ };
+
soctherm: thermal-sensor@700e2000 {
compatible = "nvidia,tegra124-soctherm";
reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
clock-frequency = <24576000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <136>;
+ socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>;
+ gpio-ranges-group-names = "gpio_range";
+ ngpios = <248>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
};
i2c0: i2c@58780000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
+ resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb3>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
clock-frequency = <25000000>;
};
- arm_timer_clk: arm_timer_clk {
+ arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 104 0 0>,
+ <&pinctrl 112 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1",
+ "gpio_range2";
+ ngpios = <136>;
+ socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
interrupts = <0 80 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
interrupts = <0 81 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
interrupts = <0 82 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
+// SPDX-License-Identifier: GPL-2.0
#include "skeleton.dtsi"
#include <dt-bindings/clock/zx296702-clock.h>
reg = <0x00400000 0x1000>;
};
- intc: interrupt-controller@00801000 {
+ intc: interrupt-controller@801000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
<0x00800100 0x100>;
};
- global_timer: timer@008000200 {
+ global_timer: timer@8000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x00800200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
config ARCH_SHMOBILE
bool
+config ARCH_SYNQUACER
+ bool "Socionext SynQuacer SoC Family"
+
config ARCH_RENESAS
bool "Renesas SoC Platforms"
select ARCH_SHMOBILE
help
This enables support for the Renesas R-Car M3-W SoC.
+ config ARCH_R8A77970
+ bool "Renesas R-Car V3M SoC Platform"
+ depends on ARCH_RENESAS
+ help
+ This enables support for the Renesas R-Car V3M SoC.
+
config ARCH_R8A77995
bool "Renesas R-Car D3 SoC Platform"
depends on ARCH_RENESAS
+# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
-
-always := $(dtb-y)
-subdir-y := $(dts-dirs)
-clean-files := *.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+# SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
-
-always := $(dtb-y)
-subdir-y := $(dts-dirs)
-clean-files := *.dtb
+ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
- dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb
+# SPDX-License-Identifier: GPL-2.0
+ dtb-$(CONFIG_ARCH_VEXPRESS) += \
+ foundation-v8.dtb foundation-v8-psci.dtb \
+ foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
-
-always := $(dtb-y)
-subdir-y := $(dts-dirs)
-clean-files := *.dtb
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd.
*
*/
#include "foundation-v8.dtsi"
-
- / {
- gic: interrupt-controller@2f000000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
- reg = <0x0 0x2f000000 0x0 0x10000>,
- <0x0 0x2f100000 0x0 0x200000>,
- <0x0 0x2c000000 0x0 0x2000>,
- <0x0 0x2c010000 0x0 0x2000>,
- <0x0 0x2c02f000 0x0 0x2000>;
- interrupts = <1 9 4>;
-
- its: its@2f020000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- reg = <0x0 0x2f020000 0x0 0x20000>;
- };
- };
- };
+ #include "foundation-v8-gicv3.dtsi"
+ #include "foundation-v8-spin-table.dtsi"
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd.
*
*/
#include "foundation-v8.dtsi"
-
- / {
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <2>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x2000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
- };
+ #include "foundation-v8-gicv2.dtsi"
+ #include "foundation-v8-spin-table.dtsi"
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd.
*
#address-cells = <2>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
- cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
- cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,armv8";
reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
timeout-sec = <30>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
clock-names = "uartclk", "apb_pclk";
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd. Fast Models
*
<0 63 4>;
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd. Fast Models
*
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
- v2m_sysreg: sysreg@010000 {
+ v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
- v2m_sysctl: sysctl@020000 {
+ v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
};
- aaci@040000 {
+ aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <11>;
clock-names = "apb_pclk";
};
- mmci@050000 {
+ mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
clock-names = "mclk", "apb_pclk";
};
- kmi@060000 {
+ kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <12>;
clock-names = "KMIREFCLK", "apb_pclk";
};
- kmi@070000 {
+ kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <13>;
clock-names = "KMIREFCLK", "apb_pclk";
};
- v2m_serial0: uart@090000 {
+ v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <5>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial1: uart@0a0000 {
+ v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <6>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial2: uart@0b0000 {
+ v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <7>;
clock-names = "uartclk", "apb_pclk";
};
- v2m_serial3: uart@0c0000 {
+ v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <8>;
clock-names = "uartclk", "apb_pclk";
};
- wdt@0f0000 {
+ wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0>;
};
};
- virtio-block@0130000 {
+ virtio-block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
+// SPDX-License-Identifier: GPL-2.0
/*
* ARM Ltd. Versatile Express
*
};
};
- smb@08000000 {
+ smb@8000000 {
compatible = "simple-bus";
#address-cells = <2>;
status = "disabled";
};
+ dspi: dspi@2100000 {
+ compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
dr_mode = "host";
phy_type = "ulpi";
};
+
+ msi: msi-controller1@1572000 {
+ compatible = "fsl,ls1012a-msi";
+ reg = <0x0 0x1572000 0x0 0x8>;
+ msi-controller;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3400000 {
+ compatible = "fsl,ls1012a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 118 0x4>, /* controller interrupt */
+ <0 117 0x4>; /* PME interrupt */
+ interrupt-names = "aer", "pme";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
qman: qman@1880000 {
compatible = "fsl,qman";
reg = <0x0 0x1880000 0x0 0x10000>;
- interrupts = <0 45 0x4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&qman_fqd &qman_pfdr>;
};
bman: bman@1890000 {
compatible = "fsl,bman";
reg = <0x0 0x1890000 0x0 0x10000>;
- interrupts = <0 45 0x4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
memory-region = <&bman_fbpr>;
};
<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
};
+ pcie@3400000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "aer", "pme";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi1>, <&msi2>, <&msi3>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3500000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "aer", "pme";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi2>, <&msi3>, <&msi1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pcie@3600000 {
+ compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "aer", "pme";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-lanes = <2>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&msi3>, <&msi1>, <&msi2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
};
reserved-memory {
no-map;
};
};
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
};
#include "qoriq-qman-portals.dtsi"
+// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Hisilicon HiKey960 Development Board
*
};
};
+ /*
+ * Legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * "" = no idea, schematic doesn't say, could be
+ * unrouted (not connected to any external pin)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+ &gpio0 {
+ /* GPIO_000-GPIO_007 */
+ gpio-line-names =
+ "",
+ "TP901", /* TEST_MODE connected to TP901 */
+ "[PMU0_SSI]",
+ "[PMU1_SSI]",
+ "[PMU2_SSI]",
+ "[PMU0_CLKOUT]",
+ "[JTAG_TCK]",
+ "[JTAG_TMS]";
+ };
+
+ &gpio1 {
+ /* GPIO_008-GPIO_015 */
+ gpio-line-names =
+ "[JTAG_TRST_N]",
+ "[JTAG_TDI]",
+ "[JTAG_TDO]",
+ "NC", "NC",
+ "[I2C3_SCL]",
+ "[I2C3_SDA]",
+ "NC";
+ };
+
+ &gpio2 {
+ /* GPIO_016-GPIO_023 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO-J", /* LSEC pin 32: GPIO_019 */
+ "GPIO_020_HDMI_SEL",
+ "GPIO-L", /* LSEC pin 34: GPIO_021 */
+ "GPIO_022_UFSBUCK_INT_N",
+ "GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+ };
+
+ &gpio3 {
+ /* GPIO_024-GPIO_031 */
+ /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+ gpio-line-names =
+ "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+ "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+ "NC",
+ "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+ "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+ "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+ "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+ "NC";
+ };
+
+ &gpio4 {
+ /* GPIO_032-GPIO_039 */
+ gpio-line-names =
+ "NC", "NC",
+ "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+ "GPIO_035_PMU2_EN",
+ "GPIO_036_USB_HUB_RESET",
+ "NC", "NC", "NC";
+ };
+
+ &gpio5 {
+ /* GPIO_040-GPIO_047 */
+ gpio-line-names =
+ "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+ "GPIO_041_HDMI_PD",
+ "TP904", /* Test point */
+ "TP905", /* Test point */
+ "NC", "NC",
+ "GPIO_046_HUB_VDD33_EN",
+ "GPIO_047_PMU1_EN";
+ };
+
+ &gpio6 {
+ /* GPIO_048-GPIO_055 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO_051_WIFI_EN",
+ "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+ /*
+ * These two pins should be used for SD(IO) data according to the
+ * 96boards specification but seems to be repurposed for a IRDA UART.
+ * They are however named according to the spec.
+ */
+ "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+ "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+ "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+ };
+
+ &gpio7 {
+ /* GPIO_056-GPIO_063 */
+ gpio-line-names =
+ "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+ "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+ "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+ "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+ "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+ "[SOC_BT_UART4_CTS_N]",
+ "[SOC_BT_UART4_RTS_N]",
+ "[SOC_BT_UART4_RXD]";
+ };
+
+ &gpio8 {
+ /* GPIO_064-GPIO_071 */
+ gpio-line-names =
+ "[SOC_BT_UART4_TXD]",
+ "NC",
+ "[PMU_HKADC_SSI]",
+ "NC",
+ "GPIO_068_SEL",
+ "NC", "NC", "NC";
+
+ };
+
+ &gpio9 {
+ /* GPIO_072-GPIO_079 */
+ gpio-line-names =
+ "NC", "NC", "NC",
+ "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+ "NC", "NC", "NC", "NC";
+ };
+
+ &gpio10 {
+ /* GPIO_080-GPIO_087 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+ };
+
+ &gpio11 {
+ /* GPIO_088-GPIO_095 */
+ gpio-line-names =
+ "NC",
+ "[PCIE_PERST_N]",
+ "NC", "NC", "NC", "NC", "NC", "NC";
+ };
+
+ &gpio12 {
+ /* GPIO_096-GPIO_103 */
+ gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+ };
+
+ &gpio13 {
+ /* GPIO_104-GPIO_111 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+ };
+
+ &gpio14 {
+ /* GPIO_112-GPIO_119 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+ };
+
+ &gpio15 {
+ /* GPIO_120-GPIO_127 */
+ gpio-line-names =
+ "NC", "NC", "NC", "NC", "NC", "NC",
+ "GPIO_126_BT_EN",
+ "TP902"; /* GPIO_127_JTAG_SEL0 */
+ };
+
+ &gpio16 {
+ /* GPIO_128-GPIO_135 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+ };
+
+ &gpio17 {
+ /* GPIO_136-GPIO_143 */
+ gpio-line-names = "", "", "", "", "", "", "", "";
+ };
+
+ &gpio18 {
+ /* GPIO_144-GPIO_151 */
+ gpio-line-names =
+ "[UFS_REF_CLK]",
+ "[UFS_RST_N]",
+ "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+ "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+ "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+ "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+ "GPIO_150_USER_LED1",
+ "GPIO_151_USER_LED2";
+ };
+
+ &gpio19 {
+ /* GPIO_152-GPIO_159 */
+ gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+ };
+
+ &gpio20 {
+ /* GPIO_160-GPIO_167 */
+ gpio-line-names =
+ "[SD_CLK]",
+ "[SD_CMD]",
+ "[SD_DATA0]",
+ "[SD_DATA1]",
+ "[SD_DATA2]",
+ "[SD_DATA3]",
+ "", "";
+ };
+
+ &gpio21 {
+ /* GPIO_168-GPIO_175 */
+ gpio-line-names =
+ "[WL_SDIO_CLK]",
+ "[WL_SDIO_CMD]",
+ "[WL_SDIO_DATA0]",
+ "[WL_SDIO_DATA1]",
+ "[WL_SDIO_DATA2]",
+ "[WL_SDIO_DATA3]",
+ "", "";
+ };
+
+ &gpio22 {
+ /* GPIO_176-GPIO_183 */
+ gpio-line-names =
+ "[GPIO_176_PMU_PWR_HOLD]",
+ "NA",
+ "[SYSCLK_EN]",
+ "GPIO_179_WL_WAKEUP_AP",
+ "GPIO_180_HDMI_INT",
+ "NA",
+ "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+ "[I2C0_SCL]"; /* LSEC pin 15 */
+ };
+
+ &gpio23 {
+ /* GPIO_184-GPIO_191 */
+ gpio-line-names =
+ "[I2C0_SDA]", /* LSEC pin 17 */
+ "[I2C1_SCL]", /* Actual SoC I2C1 */
+ "[I2C1_SDA]", /* Actual SoC I2C1 */
+ "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+ "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+ "GPIO_189_USER_LED3",
+ "GPIO_190_USER_LED4",
+ "";
+ };
+
+ &gpio24 {
+ /* GPIO_192-GPIO_199 */
+ gpio-line-names =
+ "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+ "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+ "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+ "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+ "[GPIO_196_I2S2_DI]",
+ "[GPIO_197_I2S2_DO]",
+ "[GPIO_198_I2S2_XCLK]",
+ "[GPIO_199_I2S2_XFS]";
+ };
+
+ &gpio25 {
+ /* GPIO_200-GPIO_207 */
+ gpio-line-names =
+ "NC",
+ "NC",
+ "GPIO_202_VBUS_TYPEC",
+ "GPIO_203_SD_DET",
+ "GPIO_204_PMU12_IRQ_N",
+ "GPIO_205_WIFI_ACTIVE",
+ "GPIO_206_USBSW_SEL",
+ "GPIO_207_BT_ACTIVE";
+ };
+
+ &gpio26 {
+ /* GPIO_208-GPIO_215 */
+ gpio-line-names =
+ "GPIO-A", /* LSEC pin 23: GPIO_208 */
+ "GPIO-B", /* LSEC pin 24: GPIO_209 */
+ "GPIO-C", /* LSEC pin 25: GPIO_210 */
+ "GPIO-D", /* LSEC pin 26: GPIO_211 */
+ "GPIO-E", /* LSEC pin 27: GPIO_212 */
+ "[PCIE_CLKREQ_N]",
+ "[PCIE_WAKE_N]",
+ "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+ };
+
+ &gpio27 {
+ /* GPIO_216-GPIO_223 */
+ gpio-line-names =
+ "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+ "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+ "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+ "GPIO_219_CC_INT",
+ "NC",
+ "NC",
+ "[PMU_INT]",
+ "";
+ };
+
+ &gpio28 {
+ /* GPIO_224-GPIO_231 */
+ gpio-line-names =
+ "", "", "", "", "", "", "", "";
+ };
+
&i2c0 {
/* On Low speed expansion */
label = "LS-I2C0";
+// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Hisilicon Hi3660 SoC
*
clocks = <&crg_ctrl HI3660_OSC32K>;
clock-names = "apb_pclk";
};
+
+ tsensor: tsensor@fff30000 {
+ compatible = "hisilicon,hi3660-tsensor";
+ reg = <0x0 0xfff30000 0x0 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
};
};
+// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Hisilicon Hi6220 SoC
*
};
};
};
+
+ #include "hi6220-coresight.dtsi"
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
};
};
+ cpm_comphy: phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&cpm_syscon0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpm_comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy4: phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ cpm_comphy5: phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
cpm_mdio: mdio@12a200 {
#address-cells = <1>;
#size-cells = <0>;
cpm_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x1000>;
+ reg = <0x440000 0x2000>;
cpm_clk: clock {
compatible = "marvell,cp110-clock";
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
- compatible = "marvell,armada370-nand";
+ compatible = "marvell,armada-8k-nand",
+ "marvell,armada370-nand";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_clk 1 2>;
+ marvell,system-controller = <&cpm_syscon0>;
status = "disabled";
};
/* non-prefetchable memory */
0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clocks = <&cpm_clk 1 13>;
/* non-prefetchable memory */
0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
/* non-prefetchable memory */
0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
<ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
<ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
<ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
<ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+ <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+ <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared";
+ "tx-cpu3", "rx-shared", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
};
};
+ cps_comphy: phy@120000 {
+ compatible = "marvell,comphy-cp110";
+ reg = <0x120000 0x6000>;
+ marvell,system-controller = <&cps_syscon0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cps_comphy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+
+ cps_comphy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <1>;
+ };
+
+ cps_comphy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+
+ cps_comphy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <1>;
+ };
+
+ cps_comphy4: phy@4 {
+ reg = <4>;
+ #phy-cells = <1>;
+ };
+
+ cps_comphy5: phy@5 {
+ reg = <5>;
+ #phy-cells = <1>;
+ };
+ };
+
cps_mdio: mdio@12a200 {
#address-cells = <1>;
#size-cells = <0>;
cps_syscon0: system-controller@440000 {
compatible = "syscon", "simple-mfd";
- reg = <0x440000 0x1000>;
+ reg = <0x440000 0x2000>;
cps_clk: clock {
compatible = "marvell,cp110-clock";
* this controller is only usable on the CPM
* for A7K and on the CPS for A8K.
*/
- compatible = "marvell,armada370-nand";
+ compatible = "marvell,armada370-nand",
+ "marvell,armada370-nand";
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
/* non-prefetchable memory */
0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clocks = <&cps_clk 1 13>;
/* non-prefetchable memory */
0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
/* non-prefetchable memory */
0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
+// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
status = "okay";
vmmc-supply = <&vdd_sd>;
+ };
+
+ pcie@10003000 {
+ status = "okay";
+
+ dvdd-pex-supply = <&vdd_pex>;
+ hvdd-pex-pll-supply = <&vdd_1v8>;
+ hvdd-pex-supply = <&vdd_1v8>;
+ vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ status = "okay";
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <0>;
+ status = "disabled";
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ status = "disabled";
+ };
};
gpio-keys {
+// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/tegra186-clock.h>
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h>
+ #include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
/ {
compatible = "nvidia,tegra186";
nvidia,bpmp = <&bpmp>;
};
+ pcie@10003000 {
+ compatible = "nvidia,tegra186-pcie";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+ device_type = "pci";
+ reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x10003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
+ 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+ clocks = <&bpmp TEGRA186_CLK_AFI>,
+ <&bpmp TEGRA186_CLK_PCIE>,
+ <&bpmp TEGRA186_CLK_PLLE>;
+ clock-names = "afi", "pex", "pll_e";
+
+ resets = <&bpmp TEGRA186_RESET_AFI>,
+ <&bpmp TEGRA186_RESET_PCIE>,
+ <&bpmp TEGRA186_RESET_PCIEXCLK>;
+ reset-names = "afi", "pex", "pcie_x";
+
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+ host1x@13e00000 {
+ compatible = "nvidia,tegra186-host1x", "simple-bus";
+ reg = <0x0 0x13e00000 0x0 0x10000>,
+ <0x0 0x13e10000 0x0 0x10000>;
+ reg-names = "hypervisor", "vm";
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_HOST1X>;
+ clock-names = "host1x";
+ resets = <&bpmp TEGRA186_RESET_HOST1X>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+ vic@15340000 {
+ compatible = "nvidia,tegra186-vic";
+ reg = <0x15340000 0x40000>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_VIC>;
+ clock-names = "vic";
+ resets = <&bpmp TEGRA186_RESET_VIC>;
+ reset-names = "vic";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+ };
+ };
+
gpu@17000000 {
compatible = "nvidia,gp10b";
reg = <0x0 0x17000000 0x0 0x1000000>,
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
bpmp_i2c: i2c {
compatible = "nvidia,tegra186-bpmp-i2c";
#size-cells = <0>;
status = "disabled";
};
+
+ bpmp_thermal: thermal {
+ compatible = "nvidia,tegra186-bpmp-thermal";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ a57 {
+ polling-delay = <0>;
+ polling-delay-passive = <1000>;
+
+ thermal-sensors =
+ <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_CPU>;
+
+ trips {
+ critical {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+
+ denver {
+ polling-delay = <0>;
+ polling-delay-passive = <1000>;
+
+ thermal-sensors =
+ <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AUX>;
+
+ trips {
+ critical {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+
+ gpu {
+ polling-delay = <0>;
+ polling-delay-passive = <1000>;
+
+ thermal-sensors =
+ <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_GPU>;
+
+ trips {
+ critical {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+
+ pll {
+ polling-delay = <0>;
+ polling-delay-passive = <1000>;
+
+ thermal-sensors =
+ <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_PLLX>;
+
+ trips {
+ critical {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
+
+ always_on {
+ polling-delay = <0>;
+ polling-delay-passive = <1000>;
+
+ thermal-sensors =
+ <&bpmp_thermal TEGRA186_BPMP_THERMAL_ZONE_AO>;
+
+ trips {
+ critical {
+ temperature = <101000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ };
+ };
};
timer {
+ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb
+ dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb
dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb
-
-always := $(dtb-y)
-subdir-y := $(dts-dirs)
-clean-files := *.dtb
+# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
+ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
+ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
+ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
+ dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
-
-always := $(dtb-y)
-clean-files := *.dtb
*/
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <11289600>;
+ clock-frequency = <12288000>;
};
backlight: backlight {
brightness-levels = <256 128 64 16 8 4 0>;
default-brightness-level = <6>;
+ power-supply = <®_12v>;
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
};
regulator-always-on;
};
+ reg_12v: regulator2 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
rsnd_ak4613: sound {
compatible = "simple-audio-card";
};
&ehci0 {
+ dr_mode = "otg";
status = "okay";
};
};
&hsusb {
+ dr_mode = "otg";
status = "okay";
};
};
&ohci0 {
+ dr_mode = "otg";
status = "okay";
};
avb_pins: avb {
mux {
- groups = "avb_link", "avb_phy_int", "avb_mdc",
- "avb_mii";
+ groups = "avb_link", "avb_mdc", "avb_mii";
function = "avb";
};
bias-pull-down;
};
};
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
};
&pwm1 {
};
&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
iep_mmu: iommu@ff900800 {
compatible = "rockchip,iommu";
reg = <0x0 0xff900800 0x0 0x100>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "iep_mmu";
#iommu-cells = <0>;
status = "disabled";
status = "disabled";
};
+ efuse256: efuse@ffb00000 {
+ compatible = "rockchip,rk3368-efuse";
+ reg = <0x0 0xffb00000 0x0 0x20>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&cru PCLK_EFUSE256>;
+ clock-names = "pclk_efuse";
+
+ cpu_leakage: cpu-leakage@17 {
+ reg = <0x17 0x1>;
+ };
+ temp_adjust: temp-adjust@1f {
+ reg = <0x1f 0x1>;
+ };
+ };
+
gic: interrupt-controller@ffb71000 {
compatible = "arm,gic-400";
interrupt-controller;
model = "Firefly-RK3399 Board";
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+ &hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+ };
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
+ regulator-suspend-microvolt = <3000000>;
};
};
status = "okay";
dr_mode = "host";
};
+
+ &vopb {
+ status = "okay";
+ };
+
+ &vopb_mmu {
+ status = "okay";
+ };
+
+ &vopl {
+ status = "okay";
+ };
+
+ &vopl_mmu {
+ status = "okay";
+ };
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+ #include <dt-bindings/gpio/gpio.h>
+
/memreserve/ 0x80000000 0x02000000;
/ {
};
};
- cluster0_opp: opp_table {
+ cluster0_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
};
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 4>,
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
+ resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
+ resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
+ resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
+ resets = <&peri_rst 3>;
+ };
+
+ gpio: gpio@55000000 {
+ compatible = "socionext,uniphier-gpio";
+ reg = <0x55000000 0x200>;
+ interrupt-parent = <&aidet>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 0>,
+ <&pinctrl 43 0 0>,
+ <&pinctrl 51 0 0>,
+ <&pinctrl 96 0 0>,
+ <&pinctrl 160 0 0>,
+ <&pinctrl 184 0 0>;
+ gpio-ranges-group-names = "gpio_range0",
+ "gpio_range1",
+ "gpio_range2",
+ "gpio_range3",
+ "gpio_range4",
+ "gpio_range5";
+ ngpios = <200>;
+ socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
+ <21 217 3>;
};
adamv@57920000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
+ resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
+ resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
#size-cells = <0>;
interrupts = <0 43 4>;
clocks = <&peri_clk 6>;
+ resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
+ resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&peri_clk 8>;
+ resets = <&peri_rst 8>;
clock-frequency = <100000>;
};
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
+ resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
+ resets = <&sys_rst 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ mmc-pwrseq = <&emmc_pwrseq>;
cdns,phy-input-delay-legacy = <4>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
interrupts = <0 243 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
- clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
+ <&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
};
interrupts = <0 244 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
- clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
+ <&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
};
interrupts = <0 245 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb2>;
- clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
+ clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
+ <&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
};
};
};
+ soc-glue@5f900000 {
+ compatible = "socionext,uniphier-ld11-soc-glue-debug",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5f900000 0x2000>;
+
+ efuse@100 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x100 0x28>;
+ };
+
+ efuse@200 {
+ compatible = "socionext,uniphier-efuse";
+ reg = <0x200 0x68>;
+ };
+ };
+
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-ld11-aidet";
reg = <0x5fc20000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
+ resets = <&sys_rst 2>;
};
};
};
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for binding nvidia,tegra210-car.
*
#define TEGRA210_CLK_BLINK 280
/* 281 */
#define TEGRA210_CLK_SOR1_SRC 282
+ #define TEGRA210_CLK_SOR1_OUT 282
/* 283 */
#define TEGRA210_CLK_XUSB_HOST_SRC 284
#define TEGRA210_CLK_XUSB_FALCON_SRC 285
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants specific to AM43XX pinctrl bindings.
*/
#define INPUT_EN (1 << 18)
#define SLEWCTRL_SLOW (1 << 19)
#define SLEWCTRL_FAST 0
+ #define DS0_FORCE_OFF_MODE (1 << 24)
+ #define DS0_INPUT (1 << 25)
+ #define DS0_FORCE_OUT_HIGH (1 << 26)
#define DS0_PULL_UP_DOWN_EN (1 << 27)
+ #define DS0_PULL_UP_SEL (1 << 28)
#define WAKEUP_ENABLE (1 << 29)
+ #define DS0_PIN_OUTPUT (DS0_FORCE_OFF_MODE)
+ #define DS0_PIN_OUTPUT_HIGH (DS0_FORCE_OFF_MODE | DS0_FORCE_OUT_HIGH)
+ #define DS0_PIN_OUTPUT_PULLUP (DS0_FORCE_OFF_MODE | DS0_PULL_UP_DOWN_EN | DS0_PULL_UP_SEL)
+ #define DS0_PIN_OUTPUT_PULLDOWN (DS0_FORCE_OFF_MODE | DS0_PULL_UP_DOWN_EN)
+ #define DS0_PIN_INPUT (DS0_FORCE_OFF_MODE | DS0_INPUT)
+ #define DS0_PIN_INPUT_PULLUP (DS0_FORCE_OFF_MODE | DS0_INPUT | DS0_PULL_UP_DOWN_EN | DS0_PULL_UP_SEL)
+ #define DS0_PIN_INPUT_PULLDOWN (DS0_FORCE_OFF_MODE | DS0_INPUT | DS0_PULL_UP_DOWN_EN)
+
#define PIN_OUTPUT (PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (PULL_UP)
#define PIN_OUTPUT_PULLDOWN 0
projects / linux-2.6-microblaze.git / commitdiff