regulator: max8973: Finalize switch to GPIO descriptors
authorLinus Walleij <linus.walleij@linaro.org>
Tue, 20 Feb 2024 08:36:24 +0000 (09:36 +0100)
committerMark Brown <broonie@kernel.org>
Mon, 26 Feb 2024 13:46:33 +0000 (13:46 +0000)
The dvs gpio was still using a legacy number passed from the
platform data. There are no in-tree users of the platform data
so just switch it to a gpio descriptor and obtain it in probe(),
the device tree users will work just as fine with this.

Drop the entirely unused enable_gpio from the platform data
as well. The device tree bindings mentions this but the driver
does not look for it and makes no use of it: it should probably
be implemented properly in a separate patch.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://msgid.link/r/20240220-descriptors-regulators-v1-1-097f608694be@linaro.org
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/max8973-regulator.c
include/linux/regulator/max8973-regulator.h

index 8d51932..f8bb682 100644 (file)
@@ -20,9 +20,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8973-regulator.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
-#include <linux/of_gpio.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/regmap.h>
@@ -102,7 +100,7 @@ struct max8973_chip {
        struct regulator_desc desc;
        struct regmap *regmap;
        bool enable_external_control;
-       int dvs_gpio;
+       struct gpio_desc *dvs_gpiod;
        int lru_index[MAX8973_MAX_VOUT_REG];
        int curr_vout_val[MAX8973_MAX_VOUT_REG];
        int curr_vout_reg;
@@ -184,7 +182,7 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
         * If gpios are available to select the VOUT register then least
         * recently used register for new configuration.
         */
-       if (gpio_is_valid(max->dvs_gpio))
+       if (max->dvs_gpiod)
                found = find_voltage_set_register(max, vsel,
                                        &vout_reg, &gpio_val);
 
@@ -201,8 +199,8 @@ static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
        }
 
        /* Select proper VOUT register vio gpios */
-       if (gpio_is_valid(max->dvs_gpio)) {
-               gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
+       if (max->dvs_gpiod) {
+               gpiod_set_value_cansleep(max->dvs_gpiod, gpio_val & 0x1);
                max->curr_gpio_val = gpio_val;
        }
        return 0;
@@ -531,7 +529,6 @@ static struct max8973_regulator_platform_data *max8973_parse_dt(
 
        pdata->enable_ext_control = of_property_read_bool(np,
                                                "maxim,externally-enable");
-       pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
 
        ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
        if (!ret)
@@ -612,13 +609,17 @@ static int max8973_probe(struct i2c_client *client)
                return -EIO;
        }
 
-       if (pdata->dvs_gpio == -EPROBE_DEFER)
-               return -EPROBE_DEFER;
-
        max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
        if (!max)
                return -ENOMEM;
 
+       max->dvs_gpiod = devm_gpiod_get_optional(&client->dev, "maxim,dvs",
+                        (pdata->dvs_def_state) ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+       if (IS_ERR(max->dvs_gpiod))
+               return dev_err_probe(&client->dev, PTR_ERR(max->dvs_gpiod),
+                                    "failed to obtain dvs gpio\n");
+       gpiod_set_consumer_name(max->dvs_gpiod, "max8973-dvs");
+
        max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
        if (IS_ERR(max->regmap)) {
                ret = PTR_ERR(max->regmap);
@@ -663,7 +664,6 @@ static int max8973_probe(struct i2c_client *client)
        max->desc.ramp_delay_table = max8973_buck_ramp_table;
        max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table);
 
-       max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
        max->enable_external_control = pdata->enable_ext_control;
        max->curr_gpio_val = pdata->dvs_def_state;
        max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
@@ -671,21 +671,9 @@ static int max8973_probe(struct i2c_client *client)
 
        max->lru_index[0] = max->curr_vout_reg;
 
-       if (gpio_is_valid(max->dvs_gpio)) {
-               int gpio_flags;
+       if (max->dvs_gpiod) {
                int i;
 
-               gpio_flags = (pdata->dvs_def_state) ?
-                               GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-               ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
-                               gpio_flags, "max8973-dvs");
-               if (ret) {
-                       dev_err(&client->dev,
-                               "gpio_request for gpio %d failed, err = %d\n",
-                               max->dvs_gpio, ret);
-                       return ret;
-               }
-
                /*
                 * Initialize the lru index with vout_reg id
                 * The index 0 will be most recently used and
index 8313e7e..a225e9e 100644 (file)
  *             control signal from EN input pin. If it is false then
  *             voltage output will be enabled/disabled through EN bit of
  *             device register.
- * @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host
- *             then GPIO number can be provided. If no GPIO controlled then
- *             it should be -1.
- * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
  * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
  */
 struct max8973_regulator_platform_data {
@@ -59,8 +55,6 @@ struct max8973_regulator_platform_data {
        unsigned long control_flags;
        unsigned long junction_temp_warning;
        bool enable_ext_control;
-       int enable_gpio;
-       int dvs_gpio;
        unsigned dvs_def_state:1;
 };