This fixes a regression introduced by
commit
0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7
"net: phy: replace PHY_HAS_INTERRUPT with a check for
config_intr and ack_interrupt".
This assumes that a PHY cannot trigger interrupt unless
it has .config_intr() or .ack_interrupt() implemented.
A later patch makes the code assume both need to be
implemented for interrupts to be present.
But this PHY (which is inside a DSA) will happily
fire interrupts without either callback.
Implement dummy callbacks for .config_intr() and
.ack_interrupt() in the phy header to fix this.
Tested on the RTL8366RB on D-Link DIR-685.
Fixes:
0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
.name = "RTL8366RB Gigabit Ethernet",
.features = PHY_GBIT_FEATURES,
.config_init = &rtl8366rb_config_init,
+ /* These interrupts are handled by the irq controller
+ * embedded inside the RTL8366RB, they get unmasked when the
+ * irq is requested and ACKed by reading the status register,
+ * which is done by the irqchip code.
+ */
+ .ack_interrupt = genphy_no_ack_interrupt,
+ .config_intr = genphy_no_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
{
return 0;
}
+static inline int genphy_no_ack_interrupt(struct phy_device *phydev)
+{
+ return 0;
+}
+static inline int genphy_no_config_intr(struct phy_device *phydev)
+{
+ return 0;
+}
int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad,
u16 regnum);
int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,