--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
+/*
+ * comedi/drivers/ni_routes.c
+ * Route information for NI boards.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bsearch.h>
+#include <linux/sort.h>
+
+#include "../comedi.h"
+
+#include "ni_routes.h"
+#include "ni_routing/ni_route_values.h"
+#include "ni_routing/ni_device_routes.h"
+
+/*
+ * This is defined in ni_routing/ni_route_values.h:
+ * #define B(x) ((x) - NI_NAMES_BASE)
+ */
+
+/*
+ * These are defined in ni_routing/ni_route_values.h to identify clearly
+ * elements of the table that were set. In other words, entries that are zero
+ * are invalid. To get the value to use for the register, one must mask out the
+ * high bit.
+ *
+ * #define V(x) ((x) | 0x80)
+ *
+ * #define UNMARK(x) ((x) & (~(0x80)))
+ *
+ */
+
+/* Helper for accessing data. */
+#define RVi(table, src, dest) ((table)[(dest) * NI_NUM_NAMES + (src)])
+
+static const size_t route_table_size = NI_NUM_NAMES * NI_NUM_NAMES;
+
+/*
+ * Find the proper route_values and ni_device_routes tables for this particular
+ * device.
+ *
+ * Return: -ENODATA if either was not found; 0 if both were found.
+ */
+static int ni_find_device_routes(const char *device_family,
+ const char *board_name,
+ struct ni_route_tables *tables)
+{
+ const struct ni_device_routes *dr = NULL;
+ const u8 *rv = NULL;
+ int i;
+
+ /* First, find the register_values table for this device family */
+ for (i = 0; ni_all_route_values[i]; ++i) {
+ if (memcmp(ni_all_route_values[i]->family, device_family,
+ strnlen(device_family, 30)) == 0) {
+ rv = &ni_all_route_values[i]->register_values[0][0];
+ break;
+ }
+ }
+
+ if (!rv)
+ return -ENODATA;
+
+ /* Second, find the set of routes valid for this device. */
+ for (i = 0; ni_device_routes_list[i]; ++i) {
+ if (memcmp(ni_device_routes_list[i]->device, board_name,
+ strnlen(board_name, 30)) == 0) {
+ dr = ni_device_routes_list[i];
+ break;
+ }
+ }
+
+ if (!dr)
+ return -ENODATA;
+
+ tables->route_values = rv;
+ tables->valid_routes = dr;
+
+ return 0;
+}
+
+/**
+ * ni_assign_device_routes() - Assign the proper lookup table for NI signal
+ * routing to the specified NI device.
+ *
+ * Return: -ENODATA if assignment was not successful; 0 if successful.
+ */
+int ni_assign_device_routes(const char *device_family,
+ const char *board_name,
+ struct ni_route_tables *tables)
+{
+ memset(tables, 0, sizeof(struct ni_route_tables));
+ return ni_find_device_routes(device_family, board_name, tables);
+}
+EXPORT_SYMBOL_GPL(ni_assign_device_routes);
+
+/**
+ * ni_count_valid_routes() - Count the number of valid routes.
+ * @tables: Routing tables for which to count all valid routes.
+ */
+unsigned int ni_count_valid_routes(const struct ni_route_tables *tables)
+{
+ int total = 0;
+ int i;
+
+ for (i = 0; i < tables->valid_routes->n_route_sets; ++i) {
+ const struct ni_route_set *R = &tables->valid_routes->routes[i];
+ int j;
+
+ for (j = 0; j < R->n_src; ++j) {
+ const int src = R->src[j];
+ const int dest = R->dest;
+ const u8 *rv = tables->route_values;
+
+ if (RVi(rv, B(src), B(dest)))
+ /* direct routing is valid */
+ ++total;
+ else if (channel_is_rtsi(dest) &&
+ (RVi(rv, B(src), B(NI_RGOUT0)) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(0))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(1))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(2))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(3))))) {
+ ++total;
+ }
+ }
+ }
+ return total;
+}
+EXPORT_SYMBOL_GPL(ni_count_valid_routes);
+
+/**
+ * ni_get_valid_routes() - Implements INSN_DEVICE_CONFIG_GET_ROUTES.
+ * @tables: pointer to relevant set of routing tables.
+ * @n_pairs: Number of pairs for which memory is allocated by the user. If
+ * the user specifies '0', only the number of available pairs is
+ * returned.
+ * @pair_data: Pointer to memory allocated to return pairs back to user. Each
+ * even, odd indexed member of this array will hold source,
+ * destination of a route pair respectively.
+ *
+ * Return: the number of valid routes if n_pairs == 0; otherwise, the number of
+ * valid routes copied.
+ */
+unsigned int ni_get_valid_routes(const struct ni_route_tables *tables,
+ unsigned int n_pairs,
+ unsigned int *pair_data)
+{
+ unsigned int n_valid = ni_count_valid_routes(tables);
+ int i;
+
+ if (n_pairs == 0 || n_valid == 0)
+ return n_valid;
+
+ if (!pair_data)
+ return 0;
+
+ n_valid = 0;
+
+ for (i = 0; i < tables->valid_routes->n_route_sets; ++i) {
+ const struct ni_route_set *R = &tables->valid_routes->routes[i];
+ int j;
+
+ for (j = 0; j < R->n_src; ++j) {
+ const int src = R->src[j];
+ const int dest = R->dest;
+ bool valid = false;
+ const u8 *rv = tables->route_values;
+
+ if (RVi(rv, B(src), B(dest)))
+ /* direct routing is valid */
+ valid = true;
+ else if (channel_is_rtsi(dest) &&
+ (RVi(rv, B(src), B(NI_RGOUT0)) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(0))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(1))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(2))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(3))))) {
+ /* indirect routing also valid */
+ valid = true;
+ }
+
+ if (valid) {
+ pair_data[2 * n_valid] = src;
+ pair_data[2 * n_valid + 1] = dest;
+ ++n_valid;
+ }
+
+ if (n_valid >= n_pairs)
+ return n_valid;
+ }
+ }
+ return n_valid;
+}
+EXPORT_SYMBOL_GPL(ni_get_valid_routes);
+
+/**
+ * List of NI global signal names that, as destinations, are only routeable
+ * indirectly through the *_arg elements of the comedi_cmd structure.
+ */
+static const int NI_CMD_DESTS[] = {
+ NI_AI_SampleClock,
+ NI_AI_StartTrigger,
+ NI_AI_ConvertClock,
+ NI_AO_SampleClock,
+ NI_AO_StartTrigger,
+ NI_DI_SampleClock,
+ NI_DO_SampleClock,
+};
+
+/**
+ * ni_is_cmd_dest() - Determine whether the given destination is only
+ * configurable via a comedi_cmd struct.
+ * @dest: Destination to test.
+ */
+bool ni_is_cmd_dest(int dest)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(NI_CMD_DESTS); ++i)
+ if (NI_CMD_DESTS[i] == dest)
+ return true;
+ return false;
+}
+EXPORT_SYMBOL_GPL(ni_is_cmd_dest);
+
+/* **** BEGIN Routes sort routines **** */
+static int _ni_sort_destcmp(const void *va, const void *vb)
+{
+ const struct ni_route_set *a = va;
+ const struct ni_route_set *b = vb;
+
+ if (a->dest < b->dest)
+ return -1;
+ else if (a->dest > b->dest)
+ return 1;
+ return 0;
+}
+
+static int _ni_sort_srccmp(const void *vsrc0, const void *vsrc1)
+{
+ const int *src0 = vsrc0;
+ const int *src1 = vsrc1;
+
+ if (*src0 < *src1)
+ return -1;
+ else if (*src0 > *src1)
+ return 1;
+ return 0;
+}
+
+/**
+ * ni_sort_device_routes() - Sort the list of valid device signal routes in
+ * preparation for use.
+ * @valid_routes: pointer to ni_device_routes struct to sort.
+ */
+void ni_sort_device_routes(struct ni_device_routes *valid_routes)
+{
+ unsigned int n;
+
+ /* 1. Count and set the number of ni_route_set objects. */
+ valid_routes->n_route_sets = 0;
+ while (valid_routes->routes[valid_routes->n_route_sets].dest != 0)
+ ++valid_routes->n_route_sets;
+
+ /* 2. sort all ni_route_set objects by destination. */
+ sort(valid_routes->routes, valid_routes->n_route_sets,
+ sizeof(struct ni_route_set), _ni_sort_destcmp, NULL);
+
+ /* 3. Loop through each route_set for sorting. */
+ for (n = 0; n < valid_routes->n_route_sets; ++n) {
+ struct ni_route_set *rs = &valid_routes->routes[n];
+
+ /* 3a. Count and set the number of sources. */
+ rs->n_src = 0;
+ while (rs->src[rs->n_src])
+ ++rs->n_src;
+
+ /* 3a. Sort sources. */
+ sort(valid_routes->routes[n].src, valid_routes->routes[n].n_src,
+ sizeof(int), _ni_sort_srccmp, NULL);
+ }
+}
+EXPORT_SYMBOL_GPL(ni_sort_device_routes);
+
+/* sort all valid device signal routes in prep for use */
+static void ni_sort_all_device_routes(void)
+{
+ unsigned int i;
+
+ for (i = 0; ni_device_routes_list[i]; ++i)
+ ni_sort_device_routes(ni_device_routes_list[i]);
+}
+
+/* **** BEGIN Routes search routines **** */
+static int _ni_bsearch_destcmp(const void *vkey, const void *velt)
+{
+ const int *key = vkey;
+ const struct ni_route_set *elt = velt;
+
+ if (*key < elt->dest)
+ return -1;
+ else if (*key > elt->dest)
+ return 1;
+ return 0;
+}
+
+static int _ni_bsearch_srccmp(const void *vkey, const void *velt)
+{
+ const int *key = vkey;
+ const int *elt = velt;
+
+ if (*key < *elt)
+ return -1;
+ else if (*key > *elt)
+ return 1;
+ return 0;
+}
+
+/**
+ * ni_find_route_set() - Finds the proper route set with the specified
+ * destination.
+ * @destination: Destination of which to search for the route set.
+ * @valid_routes: Pointer to device routes within which to search.
+ *
+ * Return: NULL if no route_set is found with the specified @destination;
+ * otherwise, a pointer to the route_set if found.
+ */
+const struct ni_route_set *
+ni_find_route_set(const int destination,
+ const struct ni_device_routes *valid_routes)
+{
+ return bsearch(&destination, valid_routes->routes,
+ valid_routes->n_route_sets, sizeof(struct ni_route_set),
+ _ni_bsearch_destcmp);
+}
+EXPORT_SYMBOL_GPL(ni_find_route_set);
+
+/**
+ * ni_route_set_has_source() - Determines whether the given source is in
+ * included given route_set.
+ *
+ * Return: true if found; false otherwise.
+ */
+bool ni_route_set_has_source(const struct ni_route_set *routes,
+ const int source)
+{
+ if (!bsearch(&source, routes->src, routes->n_src, sizeof(int),
+ _ni_bsearch_srccmp))
+ return false;
+ return true;
+}
+EXPORT_SYMBOL_GPL(ni_route_set_has_source);
+
+/**
+ * ni_lookup_route_register() - Look up a register value for a particular route
+ * without checking whether the route is valid for
+ * the particular device.
+ * @src: global-identifier for route source
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ *
+ * Return: -EINVAL if the specified route is not valid for this device family.
+ */
+s8 ni_lookup_route_register(int src, int dest,
+ const struct ni_route_tables *tables)
+{
+ s8 regval;
+
+ /*
+ * Be sure to use the B() macro to subtract off the NI_NAMES_BASE before
+ * indexing into the route_values array.
+ */
+ src = B(src);
+ dest = B(dest);
+ if (src < 0 || src >= NI_NUM_NAMES || dest < 0 || dest >= NI_NUM_NAMES)
+ return -EINVAL;
+ regval = RVi(tables->route_values, src, dest);
+ if (!regval)
+ return -EINVAL;
+ /* mask out the valid-value marking bit */
+ return UNMARK(regval);
+}
+EXPORT_SYMBOL_GPL(ni_lookup_route_register);
+
+/**
+ * ni_route_to_register() - Validates and converts the specified signal route
+ * (src-->dest) to the value used at the appropriate
+ * register.
+ * @src: global-identifier for route source
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ *
+ * Generally speaking, most routes require the first six bits and a few require
+ * 7 bits. Special handling is given for the return value when the route is to
+ * be handled by the RTSI sub-device. In this case, the returned register may
+ * not be sufficient to define the entire route path, but rather may only
+ * indicate the intermediate route. For example, if the route must go through
+ * the RGOUT0 pin, the (src->RGOUT0) register value will be returned.
+ * Similarly, if the route must go through the NI_RTSI_BRD lines, the BIT(6)
+ * will be set:
+ *
+ * if route does not need RTSI_BRD lines:
+ * bits 0:7 : register value
+ * for a route that must go through RGOUT0 pin, this will be equal
+ * to the (src->RGOUT0) register value.
+ * else: * route is (src->RTSI_BRD(x), RTSI_BRD(x)->TRIGGER_LINE(i)) *
+ * bits 0:5 : zero
+ * bits 6 : set to 1
+ * bits 7:7 : zero
+ *
+ * Return: register value to be used for source at destination with special
+ * cases given above; Otherwise, -1 if the specified route is not valid for
+ * this particular device.
+ */
+s8 ni_route_to_register(const int src, const int dest,
+ const struct ni_route_tables *tables)
+{
+ const struct ni_route_set *routes =
+ ni_find_route_set(dest, tables->valid_routes);
+ const u8 *rv;
+ s8 regval;
+
+ /* first check to see if source is listed with bunch of destinations. */
+ if (!routes)
+ return -1;
+ /* 2nd, check to see if destination is in list of source's targets. */
+ if (!ni_route_set_has_source(routes, src))
+ return -1;
+ /*
+ * finally, check to see if we know how to route...
+ * Be sure to use the B() macro to subtract off the NI_NAMES_BASE before
+ * indexing into the route_values array.
+ */
+ rv = tables->route_values;
+ regval = RVi(rv, B(src), B(dest));
+
+ /*
+ * if we did not validate the route, we'll see if we can route through
+ * one of the muxes
+ */
+ if (!regval && channel_is_rtsi(dest)) {
+ regval = RVi(rv, B(src), B(NI_RGOUT0));
+ if (!regval && (RVi(rv, B(src), B(NI_RTSI_BRD(0))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(1))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(2))) ||
+ RVi(rv, B(src), B(NI_RTSI_BRD(3)))))
+ regval = BIT(6);
+ }
+
+ if (!regval)
+ return -1;
+ /* mask out the valid-value marking bit */
+ return UNMARK(regval);
+}
+EXPORT_SYMBOL_GPL(ni_route_to_register);
+
+/**
+ * ni_find_route_source() - Finds the signal source corresponding to a signal
+ * route (src-->dest) of the specified routing register
+ * value and the specified route destination on the
+ * specified device.
+ *
+ * Note that this function does _not_ validate the source based on device
+ * routes.
+ *
+ * Return: The NI signal value (e.g. NI_PFI(0) or PXI_Clk10) if found.
+ * If the source was not found (i.e. the register value is not
+ * valid for any routes to the destination), -EINVAL is returned.
+ */
+int ni_find_route_source(const u8 src_sel_reg_value, int dest,
+ const struct ni_route_tables *tables)
+{
+ int src;
+
+ dest = B(dest); /* subtract NI names offset */
+ /* ensure we are not going to under/over run the route value table */
+ if (dest < 0 || dest >= NI_NUM_NAMES)
+ return -EINVAL;
+ for (src = 0; src < NI_NUM_NAMES; ++src)
+ if (RVi(tables->route_values, src, dest) ==
+ V(src_sel_reg_value))
+ return src + NI_NAMES_BASE;
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ni_find_route_source);
+
+/* **** END Routes search routines **** */
+
+/* **** BEGIN simple module entry/exit functions **** */
+static int __init ni_routes_module_init(void)
+{
+ ni_sort_all_device_routes();
+ return 0;
+}
+
+static void __exit ni_routes_module_exit(void)
+{
+}
+
+module_init(ni_routes_module_init);
+module_exit(ni_routes_module_exit);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi helper for routing signals-->terminals for NI");
+MODULE_LICENSE("GPL");
+/* **** END simple module entry/exit functions **** */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
+/*
+ * comedi/drivers/ni_routes.h
+ * Route information for NI boards.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _COMEDI_DRIVERS_NI_ROUTES_H
+#define _COMEDI_DRIVERS_NI_ROUTES_H
+
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#ifndef NI_ROUTE_VALUE_EXTERNAL_CONVERSION
+#include <linux/bitops.h>
+#endif
+
+#include "../comedi.h"
+
+/**
+ * struct ni_route_set - Set of destinations with a common source.
+ * @dest: Destination of all sources in this route set.
+ * @n_src: Number of sources for this route set.
+ * @src: List of sources that all map to the same destination.
+ */
+struct ni_route_set {
+ int dest;
+ int n_src;
+ int *src;
+};
+
+/**
+ * struct ni_device_routes - List of all src->dest sets for a particular device.
+ * @device: Name of board/device (e.g. pxi-6733).
+ * @n_route_sets: Number of route sets that are valid for this device.
+ * @routes: List of route sets that are valid for this device.
+ */
+struct ni_device_routes {
+ const char *device;
+ int n_route_sets;
+ struct ni_route_set *routes;
+};
+
+/**
+ * struct ni_route_tables - Register values and valid routes for a device.
+ * @valid_routes: Pointer to a all valid route sets for a single device.
+ * @route_values: Pointer to register values for all routes for the family to
+ * which the device belongs.
+ *
+ * Link to the valid src->dest routes and the register values used to assign
+ * such routes for that particular device.
+ */
+struct ni_route_tables {
+ const struct ni_device_routes *valid_routes;
+ const u8 *route_values;
+};
+
+/*
+ * ni_assign_device_routes() - Assign the proper lookup table for NI signal
+ * routing to the specified NI device.
+ *
+ * Return: -ENODATA if assignment was not successful; 0 if successful.
+ */
+int ni_assign_device_routes(const char *device_family,
+ const char *board_name,
+ struct ni_route_tables *tables);
+
+/*
+ * ni_find_route_set() - Finds the proper route set with the specified
+ * destination.
+ * @destination: Destination of which to search for the route set.
+ * @valid_routes: Pointer to device routes within which to search.
+ *
+ * Return: NULL if no route_set is found with the specified @destination;
+ * otherwise, a pointer to the route_set if found.
+ */
+const struct ni_route_set *
+ni_find_route_set(const int destination,
+ const struct ni_device_routes *valid_routes);
+
+/*
+ * ni_route_set_has_source() - Determines whether the given source is in
+ * included given route_set.
+ *
+ * Return: true if found; false otherwise.
+ */
+bool ni_route_set_has_source(const struct ni_route_set *routes, const int src);
+
+/*
+ * ni_route_to_register() - Validates and converts the specified signal route
+ * (src-->dest) to the value used at the appropriate
+ * register.
+ * @src: global-identifier for route source
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ *
+ * Generally speaking, most routes require the first six bits and a few require
+ * 7 bits. Special handling is given for the return value when the route is to
+ * be handled by the RTSI sub-device. In this case, the returned register may
+ * not be sufficient to define the entire route path, but rather may only
+ * indicate the intermediate route. For example, if the route must go through
+ * the RGOUT0 pin, the (src->RGOUT0) register value will be returned.
+ * Similarly, if the route must go through the NI_RTSI_BRD lines, the BIT(6)
+ * will be set:
+ *
+ * if route does not need RTSI_BRD lines:
+ * bits 0:7 : register value
+ * for a route that must go through RGOUT0 pin, this will be equal
+ * to the (src->RGOUT0) register value.
+ * else: * route is (src->RTSI_BRD(x), RTSI_BRD(x)->TRIGGER_LINE(i)) *
+ * bits 0:5 : zero
+ * bits 6 : set to 1
+ * bits 7:7 : zero
+ *
+ * Return: register value to be used for source at destination with special
+ * cases given above; Otherwise, -1 if the specified route is not valid for
+ * this particular device.
+ */
+s8 ni_route_to_register(const int src, const int dest,
+ const struct ni_route_tables *tables);
+
+static inline bool ni_rtsi_route_requires_mux(s8 value)
+{
+ return value & BIT(6);
+}
+
+/*
+ * ni_lookup_route_register() - Look up a register value for a particular route
+ * without checking whether the route is valid for
+ * the particular device.
+ * @src: global-identifier for route source
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ *
+ * Return: -EINVAL if the specified route is not valid for this device family.
+ */
+s8 ni_lookup_route_register(int src, int dest,
+ const struct ni_route_tables *tables);
+
+/**
+ * route_is_valid() - Determines whether the specified signal route (src-->dest)
+ * is valid for the given NI comedi_device.
+ * @src: global-identifier for route source
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ *
+ * Return: True if the route is valid, otherwise false.
+ */
+static inline bool route_is_valid(const int src, const int dest,
+ const struct ni_route_tables *tables)
+{
+ return ni_route_to_register(src, dest, tables) >= 0;
+}
+
+/*
+ * ni_is_cmd_dest() - Determine whether the given destination is only
+ * configurable via a comedi_cmd struct.
+ * @dest: Destination to test.
+ */
+bool ni_is_cmd_dest(int dest);
+
+static inline bool channel_is_pfi(int channel)
+{
+ return NI_PFI(0) <= channel && channel <= NI_PFI(-1);
+}
+
+static inline bool channel_is_rtsi(int channel)
+{
+ return TRIGGER_LINE(0) <= channel && channel <= TRIGGER_LINE(-1);
+}
+
+static inline bool channel_is_ctr(int channel)
+{
+ return channel >= NI_COUNTER_NAMES_BASE &&
+ channel <= NI_COUNTER_NAMES_MAX;
+}
+
+/*
+ * ni_count_valid_routes() - Count the number of valid routes.
+ * @tables: Routing tables for which to count all valid routes.
+ */
+unsigned int ni_count_valid_routes(const struct ni_route_tables *tables);
+
+/*
+ * ni_get_valid_routes() - Implements INSN_DEVICE_CONFIG_GET_ROUTES.
+ * @tables: pointer to relevant set of routing tables.
+ * @n_pairs: Number of pairs for which memory is allocated by the user. If
+ * the user specifies '0', only the number of available pairs is
+ * returned.
+ * @pair_data: Pointer to memory allocated to return pairs back to user. Each
+ * even, odd indexed member of this array will hold source,
+ * destination of a route pair respectively.
+ *
+ * Return: the number of valid routes if n_pairs == 0; otherwise, the number of
+ * valid routes copied.
+ */
+unsigned int ni_get_valid_routes(const struct ni_route_tables *tables,
+ unsigned int n_pairs,
+ unsigned int *pair_data);
+
+/*
+ * ni_sort_device_routes() - Sort the list of valid device signal routes in
+ * preparation for use.
+ * @valid_routes: pointer to ni_device_routes struct to sort.
+ */
+void ni_sort_device_routes(struct ni_device_routes *valid_routes);
+
+/*
+ * ni_find_route_source() - Finds the signal source corresponding to a signal
+ * route (src-->dest) of the specified routing register
+ * value and the specified route destination on the
+ * specified device.
+ *
+ * Note that this function does _not_ validate the source based on device
+ * routes.
+ *
+ * Return: The NI signal value (e.g. NI_PFI(0) or PXI_Clk10) if found.
+ * If the source was not found (i.e. the register value is not
+ * valid for any routes to the destination), -EINVAL is returned.
+ */
+int ni_find_route_source(const u8 src_sel_reg_value, const int dest,
+ const struct ni_route_tables *tables);
+
+/**
+ * route_register_is_valid() - Determines whether the register value for the
+ * specified route destination on the specified
+ * device is valid.
+ */
+static inline bool route_register_is_valid(const u8 src_sel_reg_value,
+ const int dest,
+ const struct ni_route_tables *tables)
+{
+ return ni_find_route_source(src_sel_reg_value, dest, tables) >= 0;
+}
+
+/**
+ * ni_get_reg_value_roffs() - Determines the proper register value for a
+ * particular valid NI signal/terminal route.
+ * @src: Either a direct register value or one of NI_* signal names.
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ * @direct_reg_offset:
+ * Compatibility compensation argument. This argument allows us to
+ * arbitrarily apply an offset to src if src is a direct register
+ * value reference. This is necessary to be compatible with
+ * definitions of register values as previously exported directly
+ * to user space.
+ *
+ * Return: the register value (>0) to be used at the destination if the src is
+ * valid for the given destination; -1 otherwise.
+ */
+static inline s8 ni_get_reg_value_roffs(int src, const int dest,
+ const struct ni_route_tables *tables,
+ const int direct_reg_offset)
+{
+ if (src < NI_NAMES_BASE) {
+ src += direct_reg_offset;
+ /*
+ * In this case, the src is expected to actually be a register
+ * value.
+ */
+ if (route_register_is_valid(src, dest, tables))
+ return src;
+ return -1;
+ }
+
+ /*
+ * Otherwise, the src is expected to be one of the abstracted NI
+ * signal/terminal names.
+ */
+ return ni_route_to_register(src, dest, tables);
+}
+
+static inline int ni_get_reg_value(const int src, const int dest,
+ const struct ni_route_tables *tables)
+{
+ return ni_get_reg_value_roffs(src, dest, tables, 0);
+}
+
+/**
+ * ni_check_trigger_arg_roffs() - Checks the trigger argument (*_arg) of an NI
+ * device to ensure that the *_arg value
+ * corresponds to _either_ a valid register value
+ * to define a trigger source, _or_ a valid NI
+ * signal/terminal name that has a valid route to
+ * the destination on the particular device.
+ * @src: Either a direct register value or one of NI_* signal names.
+ * @dest: global-identifier for route destination
+ * @tables: pointer to relevant set of routing tables.
+ * @direct_reg_offset:
+ * Compatibility compensation argument. This argument allows us to
+ * arbitrarily apply an offset to src if src is a direct register
+ * value reference. This is necessary to be compatible with
+ * definitions of register values as previously exported directly
+ * to user space.
+ *
+ * Return: 0 if the src (either register value or NI signal/terminal name) is
+ * valid for the destination; -EINVAL otherwise.
+ */
+static inline
+int ni_check_trigger_arg_roffs(int src, const int dest,
+ const struct ni_route_tables *tables,
+ const int direct_reg_offset)
+{
+ if (ni_get_reg_value_roffs(src, dest, tables, direct_reg_offset) < 0)
+ return -EINVAL;
+ return 0;
+}
+
+static inline int ni_check_trigger_arg(const int src, const int dest,
+ const struct ni_route_tables *tables)
+{
+ return ni_check_trigger_arg_roffs(src, dest, tables, 0);
+}
+
+#endif /* _COMEDI_DRIVERS_NI_ROUTES_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* vim: set ts=8 sw=8 noet tw=80 nowrap: */
+/*
+ * comedi/drivers/tests/ni_routes_test.c
+ * Unit tests for NI routes (ni_routes.c module).
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2016 Spencer E. Olson <olsonse@umich.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+
+#include "../ni_stc.h"
+#include "../ni_routes.h"
+#include "unittest.h"
+
+#define RVi(table, src, dest) ((table)[(dest) * NI_NUM_NAMES + (src)])
+#define O(x) ((x) + NI_NAMES_BASE)
+#define B(x) ((x) - NI_NAMES_BASE)
+#define V(x) ((x) | 0x80)
+
+/* *** BEGIN fake board data *** */
+static const char *pci_6070e = "pci-6070e";
+static const char *pci_6220 = "pci-6220";
+static const char *pci_fake = "pci-fake";
+
+static const char *ni_eseries = "ni_eseries";
+static const char *ni_mseries = "ni_mseries";
+
+static struct ni_board_struct board = {
+ .name = NULL,
+};
+
+static struct ni_private private = {
+ .is_m_series = 0,
+};
+
+static const int bad_dest = O(8), dest0 = O(0), desti = O(5);
+static const int ith_dest_index = 2;
+static const int no_val_dest = O(7), no_val_index = 4;
+
+/* These have to be defs to be used in init code below */
+#define rgout0_src0 (O(100))
+#define rgout0_src1 (O(101))
+#define brd0_src0 (O(110))
+#define brd0_src1 (O(111))
+#define brd1_src0 (O(120))
+#define brd1_src1 (O(121))
+#define brd2_src0 (O(130))
+#define brd2_src1 (O(131))
+#define brd3_src0 (O(140))
+#define brd3_src1 (O(141))
+
+/* I1 and I2 should not call O(...). Mostly here to shut checkpatch.pl up */
+#define I1(x1) \
+ (int[]){ \
+ x1, 0 \
+ }
+#define I2(x1, x2) \
+ (int[]){ \
+ (x1), (x2), 0 \
+ }
+#define I3(x1, x2, x3) \
+ (int[]){ \
+ (x1), (x2), (x3), 0 \
+ }
+
+/* O9 is build to call O(...) for each arg */
+#define O9(x1, x2, x3, x4, x5, x6, x7, x8, x9) \
+ (int[]){ \
+ O(x1), O(x2), O(x3), O(x4), O(x5), O(x6), O(x7), O(x8), O(x9), \
+ 0 \
+ }
+
+static struct ni_device_routes DR = {
+ .device = "testdev",
+ .routes = (struct ni_route_set[]){
+ {.dest = O(0), .src = O9(/**/1, 2, 3, 4, 5, 6, 7, 8, 9)},
+ {.dest = O(1), .src = O9(0, /**/2, 3, 4, 5, 6, 7, 8, 9)},
+ /* ith route_set */
+ {.dest = O(5), .src = O9(0, 1, 2, 3, 4,/**/ 6, 7, 8, 9)},
+ {.dest = O(6), .src = O9(0, 1, 2, 3, 4, 5,/**/ 7, 8, 9)},
+ /* next one will not have valid reg values */
+ {.dest = O(7), .src = O9(0, 1, 2, 3, 4, 5, 6,/**/ 8, 9)},
+ {.dest = O(9), .src = O9(0, 1, 2, 3, 4, 5, 6, 7, 8/**/)},
+
+ /* indirect routes done through muxes */
+ {.dest = TRIGGER_LINE(0), .src = I1(rgout0_src0)},
+ {.dest = TRIGGER_LINE(1), .src = I3(rgout0_src0,
+ brd3_src0,
+ brd3_src1)},
+ {.dest = TRIGGER_LINE(2), .src = I3(rgout0_src1,
+ brd2_src0,
+ brd2_src1)},
+ {.dest = TRIGGER_LINE(3), .src = I3(rgout0_src1,
+ brd1_src0,
+ brd1_src1)},
+ {.dest = TRIGGER_LINE(4), .src = I2(brd0_src0,
+ brd0_src1)},
+ {.dest = 0},
+ },
+};
+
+#undef I1
+#undef I2
+#undef O9
+
+#define RV9(x1, x2, x3, x4, x5, x6, x7, x8, x9) \
+ [x1] = V(x1), [x2] = V(x2), [x3] = V(x3), [x4] = V(x4), \
+ [x5] = V(x5), [x6] = V(x6), [x7] = V(x7), [x8] = V(x8), \
+ [x9] = V(x9),
+
+/* This table is indexed as RV[destination][source] */
+static const u8 RV[NI_NUM_NAMES][NI_NUM_NAMES] = {
+ [0] = {RV9(/**/1, 2, 3, 4, 5, 6, 7, 8, 9)},
+ [1] = {RV9(0,/**/ 2, 3, 4, 5, 6, 7, 8, 9)},
+ [2] = {RV9(0, 1,/**/3, 4, 5, 6, 7, 8, 9)},
+ [3] = {RV9(0, 1, 2,/**/4, 5, 6, 7, 8, 9)},
+ [4] = {RV9(0, 1, 2, 3,/**/5, 6, 7, 8, 9)},
+ [5] = {RV9(0, 1, 2, 3, 4,/**/6, 7, 8, 9)},
+ [6] = {RV9(0, 1, 2, 3, 4, 5,/**/7, 8, 9)},
+ /* [7] is intentionaly left absent to test invalid routes */
+ [8] = {RV9(0, 1, 2, 3, 4, 5, 6, 7,/**/9)},
+ [9] = {RV9(0, 1, 2, 3, 4, 5, 6, 7, 8/**/)},
+ /* some tests for needing extra muxes */
+ [B(NI_RGOUT0)] = {[B(rgout0_src0)] = V(0),
+ [B(rgout0_src1)] = V(1)},
+ [B(NI_RTSI_BRD(0))] = {[B(brd0_src0)] = V(0),
+ [B(brd0_src1)] = V(1)},
+ [B(NI_RTSI_BRD(1))] = {[B(brd1_src0)] = V(0),
+ [B(brd1_src1)] = V(1)},
+ [B(NI_RTSI_BRD(2))] = {[B(brd2_src0)] = V(0),
+ [B(brd2_src1)] = V(1)},
+ [B(NI_RTSI_BRD(3))] = {[B(brd3_src0)] = V(0),
+ [B(brd3_src1)] = V(1)},
+};
+
+#undef RV9
+
+/* *** END fake board data *** */
+
+/* *** BEGIN board data initializers *** */
+static void init_private(void)
+{
+ memset(&private, 0, sizeof(struct ni_private));
+}
+
+static void init_pci_6070e(void)
+{
+ board.name = pci_6070e;
+ init_private();
+ private.is_m_series = 0;
+}
+
+static void init_pci_6220(void)
+{
+ board.name = pci_6220;
+ init_private();
+ private.is_m_series = 1;
+}
+
+static void init_pci_fake(void)
+{
+ board.name = pci_fake;
+ init_private();
+ private.routing_tables.route_values = &RV[0][0];
+ private.routing_tables.valid_routes = &DR;
+}
+
+/* *** END board data initializers *** */
+
+/* Tests that route_sets are in order of the signal destination. */
+static bool route_set_dests_in_order(const struct ni_device_routes *devroutes)
+{
+ int i;
+ int last = NI_NAMES_BASE - 1;
+
+ for (i = 0; i < devroutes->n_route_sets; ++i) {
+ if (last >= devroutes->routes[i].dest)
+ return false;
+ last = devroutes->routes[i].dest;
+ }
+ return true;
+}
+
+/* Tests that all route_set->src are in order of the signal source. */
+bool route_set_sources_in_order(const struct ni_device_routes *devroutes)
+{
+ int i;
+
+ for (i = 0; i < devroutes->n_route_sets; ++i) {
+ int j;
+ int last = NI_NAMES_BASE - 1;
+
+ for (j = 0; j < devroutes->routes[i].n_src; ++j) {
+ if (last >= devroutes->routes[i].src[j])
+ return false;
+ last = devroutes->routes[i].src[j];
+ }
+ }
+ return true;
+}
+
+void test_ni_assign_device_routes(void)
+{
+ const struct ni_device_routes *devroutes, *olddevroutes;
+ const u8 *table, *oldtable;
+
+ init_pci_6070e();
+ ni_assign_device_routes(ni_eseries, pci_6070e, &private.routing_tables);
+ devroutes = private.routing_tables.valid_routes;
+ table = private.routing_tables.route_values;
+
+ unittest(strncmp(devroutes->device, pci_6070e, 10) == 0,
+ "find device pci-6070e\n");
+ unittest(devroutes->n_route_sets == 37,
+ "number of pci-6070e route_sets == 37\n");
+ unittest(devroutes->routes->dest == NI_PFI(0),
+ "first pci-6070e route_set is for NI_PFI(0)\n");
+ unittest(devroutes->routes->n_src == 1,
+ "first pci-6070e route_set length == 1\n");
+ unittest(devroutes->routes->src[0] == NI_AI_StartTrigger,
+ "first pci-6070e route_set src. == NI_AI_StartTrigger\n");
+ unittest(devroutes->routes[10].dest == TRIGGER_LINE(0),
+ "10th pci-6070e route_set is for TRIGGER_LINE(0)\n");
+ unittest(devroutes->routes[10].n_src == 10,
+ "10th pci-6070e route_set length == 10\n");
+ unittest(devroutes->routes[10].src[0] == NI_CtrSource(0),
+ "10th pci-6070e route_set src. == NI_CtrSource(0)\n");
+ unittest(route_set_dests_in_order(devroutes),
+ "all pci-6070e route_sets in order of signal destination\n");
+ unittest(route_set_sources_in_order(devroutes),
+ "all pci-6070e route_set->src's in order of signal source\n");
+
+ unittest(
+ RVi(table, B(PXI_Star), B(NI_AI_SampleClock)) == V(17) &&
+ RVi(table, B(NI_10MHzRefClock), B(TRIGGER_LINE(0))) == 0 &&
+ RVi(table, B(NI_AI_ConvertClock), B(NI_PFI(0))) == 0 &&
+ RVi(table, B(NI_AI_ConvertClock), B(NI_PFI(2))) ==
+ V(NI_PFI_OUTPUT_AI_CONVERT),
+ "pci-6070e finds e-series route_values table\n");
+
+ olddevroutes = devroutes;
+ oldtable = table;
+ init_pci_6220();
+ ni_assign_device_routes(ni_mseries, pci_6220, &private.routing_tables);
+ devroutes = private.routing_tables.valid_routes;
+ table = private.routing_tables.route_values;
+
+ unittest(strncmp(devroutes->device, pci_6220, 10) == 0,
+ "find device pci-6220\n");
+ unittest(oldtable != table, "pci-6220 find other route_values table\n");
+
+ unittest(
+ RVi(table, B(PXI_Star), B(NI_AI_SampleClock)) == V(20) &&
+ RVi(table, B(NI_10MHzRefClock), B(TRIGGER_LINE(0))) == V(12) &&
+ RVi(table, B(NI_AI_ConvertClock), B(NI_PFI(0))) == V(3) &&
+ RVi(table, B(NI_AI_ConvertClock), B(NI_PFI(2))) == V(3),
+ "pci-6220 finds m-series route_values table\n");
+}
+
+void test_ni_sort_device_routes(void)
+{
+ /* We begin by sorting the device routes for use in later tests */
+ ni_sort_device_routes(&DR);
+ /* now we test that sorting. */
+ unittest(route_set_dests_in_order(&DR),
+ "all route_sets of fake data in order of sig. destination\n");
+ unittest(route_set_sources_in_order(&DR),
+ "all route_set->src's of fake data in order of sig. source\n");
+}
+
+void test_ni_find_route_set(void)
+{
+ unittest(ni_find_route_set(bad_dest, &DR) == NULL,
+ "check for nonexistent route_set\n");
+ unittest(ni_find_route_set(dest0, &DR) == &DR.routes[0],
+ "find first route_set\n");
+ unittest(ni_find_route_set(desti, &DR) == &DR.routes[ith_dest_index],
+ "find ith route_set\n");
+ unittest(ni_find_route_set(no_val_dest, &DR) ==
+ &DR.routes[no_val_index],
+ "find no_val route_set in spite of missing values\n");
+ unittest(ni_find_route_set(DR.routes[DR.n_route_sets - 1].dest, &DR) ==
+ &DR.routes[DR.n_route_sets - 1],
+ "find last route_set\n");
+}
+
+void test_ni_route_set_has_source(void)
+{
+ unittest(!ni_route_set_has_source(&DR.routes[0], O(0)),
+ "check for bad source\n");
+ unittest(ni_route_set_has_source(&DR.routes[0], O(1)),
+ "find first source\n");
+ unittest(ni_route_set_has_source(&DR.routes[0], O(5)),
+ "find fifth source\n");
+ unittest(ni_route_set_has_source(&DR.routes[0], O(9)),
+ "find last source\n");
+}
+
+void test_ni_route_to_register(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_route_to_register(O(0), O(0), T) < 0,
+ "check for bad route 0-->0\n");
+ unittest(ni_route_to_register(O(1), O(0), T) == 1,
+ "validate first destination\n");
+ unittest(ni_route_to_register(O(6), O(5), T) == 6,
+ "validate middle destination\n");
+ unittest(ni_route_to_register(O(8), O(9), T) == 8,
+ "validate last destination\n");
+
+ /* choice of trigger line in the following is somewhat random */
+ unittest(ni_route_to_register(rgout0_src0, TRIGGER_LINE(0), T) == 0,
+ "validate indirect route through rgout0 to TRIGGER_LINE(0)\n");
+ unittest(ni_route_to_register(rgout0_src0, TRIGGER_LINE(1), T) == 0,
+ "validate indirect route through rgout0 to TRIGGER_LINE(1)\n");
+ unittest(ni_route_to_register(rgout0_src1, TRIGGER_LINE(2), T) == 1,
+ "validate indirect route through rgout0 to TRIGGER_LINE(2)\n");
+ unittest(ni_route_to_register(rgout0_src1, TRIGGER_LINE(3), T) == 1,
+ "validate indirect route through rgout0 to TRIGGER_LINE(3)\n");
+
+ unittest(ni_route_to_register(brd0_src0, TRIGGER_LINE(4), T) ==
+ BIT(6),
+ "validate indirect route through brd0 to TRIGGER_LINE(4)\n");
+ unittest(ni_route_to_register(brd0_src1, TRIGGER_LINE(4), T) ==
+ BIT(6),
+ "validate indirect route through brd0 to TRIGGER_LINE(4)\n");
+ unittest(ni_route_to_register(brd1_src0, TRIGGER_LINE(3), T) ==
+ BIT(6),
+ "validate indirect route through brd1 to TRIGGER_LINE(3)\n");
+ unittest(ni_route_to_register(brd1_src1, TRIGGER_LINE(3), T) ==
+ BIT(6),
+ "validate indirect route through brd1 to TRIGGER_LINE(3)\n");
+ unittest(ni_route_to_register(brd2_src0, TRIGGER_LINE(2), T) ==
+ BIT(6),
+ "validate indirect route through brd2 to TRIGGER_LINE(2)\n");
+ unittest(ni_route_to_register(brd2_src1, TRIGGER_LINE(2), T) ==
+ BIT(6),
+ "validate indirect route through brd2 to TRIGGER_LINE(2)\n");
+ unittest(ni_route_to_register(brd3_src0, TRIGGER_LINE(1), T) ==
+ BIT(6),
+ "validate indirect route through brd3 to TRIGGER_LINE(1)\n");
+ unittest(ni_route_to_register(brd3_src1, TRIGGER_LINE(1), T) ==
+ BIT(6),
+ "validate indirect route through brd3 to TRIGGER_LINE(1)\n");
+}
+
+void test_ni_lookup_route_register(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_lookup_route_register(O(0), O(0), T) == -EINVAL,
+ "check for bad route 0-->0\n");
+ unittest(ni_lookup_route_register(O(1), O(0), T) == 1,
+ "validate first destination\n");
+ unittest(ni_lookup_route_register(O(6), O(5), T) == 6,
+ "validate middle destination\n");
+ unittest(ni_lookup_route_register(O(8), O(9), T) == 8,
+ "validate last destination\n");
+ unittest(ni_lookup_route_register(O(10), O(9), T) == -EINVAL,
+ "lookup invalid desination\n");
+
+ unittest(ni_lookup_route_register(rgout0_src0, TRIGGER_LINE(0), T) ==
+ -EINVAL,
+ "rgout0_src0: no direct lookup of indirect route\n");
+ unittest(ni_lookup_route_register(rgout0_src0, NI_RGOUT0, T) == 0,
+ "rgout0_src0: lookup indirect route register\n");
+ unittest(ni_lookup_route_register(rgout0_src1, TRIGGER_LINE(2), T) ==
+ -EINVAL,
+ "rgout0_src1: no direct lookup of indirect route\n");
+ unittest(ni_lookup_route_register(rgout0_src1, NI_RGOUT0, T) == 1,
+ "rgout0_src1: lookup indirect route register\n");
+
+ unittest(ni_lookup_route_register(brd0_src0, TRIGGER_LINE(4), T) ==
+ -EINVAL,
+ "brd0_src0: no direct lookup of indirect route\n");
+ unittest(ni_lookup_route_register(brd0_src0, NI_RTSI_BRD(0), T) == 0,
+ "brd0_src0: lookup indirect route register\n");
+ unittest(ni_lookup_route_register(brd0_src1, TRIGGER_LINE(4), T) ==
+ -EINVAL,
+ "brd0_src1: no direct lookup of indirect route\n");
+ unittest(ni_lookup_route_register(brd0_src1, NI_RTSI_BRD(0), T) == 1,
+ "brd0_src1: lookup indirect route register\n");
+}
+
+void test_route_is_valid(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(!route_is_valid(O(0), O(0), T),
+ "check for bad route 0-->0\n");
+ unittest(route_is_valid(O(0), O(1), T),
+ "validate first destination\n");
+ unittest(route_is_valid(O(5), O(6), T),
+ "validate middle destination\n");
+ unittest(route_is_valid(O(8), O(9), T),
+ "validate last destination\n");
+}
+
+void test_ni_is_cmd_dest(void)
+{
+ init_pci_fake();
+ unittest(ni_is_cmd_dest(NI_AI_SampleClock),
+ "check that AI/SampleClock is cmd destination\n");
+ unittest(ni_is_cmd_dest(NI_AI_StartTrigger),
+ "check that AI/StartTrigger is cmd destination\n");
+ unittest(ni_is_cmd_dest(NI_AI_ConvertClock),
+ "check that AI/ConvertClock is cmd destination\n");
+ unittest(ni_is_cmd_dest(NI_AO_SampleClock),
+ "check that AO/SampleClock is cmd destination\n");
+ unittest(ni_is_cmd_dest(NI_DO_SampleClock),
+ "check that DO/SampleClock is cmd destination\n");
+ unittest(!ni_is_cmd_dest(NI_AO_SampleClockTimebase),
+ "check that AO/SampleClockTimebase _not_ cmd destination\n");
+}
+
+void test_channel_is_pfi(void)
+{
+ init_pci_fake();
+ unittest(channel_is_pfi(NI_PFI(0)), "check First pfi channel\n");
+ unittest(channel_is_pfi(NI_PFI(10)), "check 10th pfi channel\n");
+ unittest(channel_is_pfi(NI_PFI(-1)), "check last pfi channel\n");
+ unittest(!channel_is_pfi(NI_PFI(-1) + 1),
+ "check first non pfi channel\n");
+}
+
+void test_channel_is_rtsi(void)
+{
+ init_pci_fake();
+ unittest(channel_is_rtsi(TRIGGER_LINE(0)),
+ "check First rtsi channel\n");
+ unittest(channel_is_rtsi(TRIGGER_LINE(3)),
+ "check 3rd rtsi channel\n");
+ unittest(channel_is_rtsi(TRIGGER_LINE(-1)),
+ "check last rtsi channel\n");
+ unittest(!channel_is_rtsi(TRIGGER_LINE(-1) + 1),
+ "check first non rtsi channel\n");
+}
+
+void test_ni_count_valid_routes(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_count_valid_routes(T) == 57, "count all valid routes\n");
+}
+
+void test_ni_get_valid_routes(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+ unsigned int pair_data[2];
+
+ init_pci_fake();
+ unittest(ni_get_valid_routes(T, 0, NULL) == 57,
+ "count all valid routes through ni_get_valid_routes\n");
+
+ unittest(ni_get_valid_routes(T, 1, pair_data) == 1,
+ "copied first valid route from ni_get_valid_routes\n");
+ unittest(pair_data[0] == O(1),
+ "source of first valid pair from ni_get_valid_routes\n");
+ unittest(pair_data[1] == O(0),
+ "destination of first valid pair from ni_get_valid_routes\n");
+}
+
+void test_ni_find_route_source(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_find_route_source(4, O(4), T) == -EINVAL,
+ "check for bad source 4-->4\n");
+ unittest(ni_find_route_source(0, O(1), T) == O(0),
+ "find first source\n");
+ unittest(ni_find_route_source(4, O(6), T) == O(4),
+ "find middle source\n");
+ unittest(ni_find_route_source(9, O(8), T) == O(9),
+ "find last source");
+ unittest(ni_find_route_source(8, O(9), T) == O(8),
+ "find invalid source (without checking device routes)\n");
+}
+
+void test_route_register_is_valid(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(route_register_is_valid(4, O(4), T) == false,
+ "check for bad source 4-->4\n");
+ unittest(route_register_is_valid(0, O(1), T) == true,
+ "find first source\n");
+ unittest(route_register_is_valid(4, O(6), T) == true,
+ "find middle source\n");
+ unittest(route_register_is_valid(9, O(8), T) == true,
+ "find last source");
+}
+
+void test_ni_check_trigger_arg(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_check_trigger_arg(0, O(0), T) == -EINVAL,
+ "check bad direct trigger arg for first reg->dest\n");
+ unittest(ni_check_trigger_arg(0, O(1), T) == 0,
+ "check direct trigger arg for first reg->dest\n");
+ unittest(ni_check_trigger_arg(4, O(6), T) == 0,
+ "check direct trigger arg for middle reg->dest\n");
+ unittest(ni_check_trigger_arg(9, O(8), T) == 0,
+ "check direct trigger arg for last reg->dest\n");
+
+ unittest(ni_check_trigger_arg_roffs(-1, O(0), T, 1) == -EINVAL,
+ "check bad direct trigger arg for first reg->dest w/offs\n");
+ unittest(ni_check_trigger_arg_roffs(0, O(1), T, 0) == 0,
+ "check direct trigger arg for first reg->dest w/offs\n");
+ unittest(ni_check_trigger_arg_roffs(3, O(6), T, 1) == 0,
+ "check direct trigger arg for middle reg->dest w/offs\n");
+ unittest(ni_check_trigger_arg_roffs(7, O(8), T, 2) == 0,
+ "check direct trigger arg for last reg->dest w/offs\n");
+
+ unittest(ni_check_trigger_arg(O(0), O(0), T) == -EINVAL,
+ "check bad trigger arg for first src->dest\n");
+ unittest(ni_check_trigger_arg(O(0), O(1), T) == 0,
+ "check trigger arg for first src->dest\n");
+ unittest(ni_check_trigger_arg(O(5), O(6), T) == 0,
+ "check trigger arg for middle src->dest\n");
+ unittest(ni_check_trigger_arg(O(8), O(9), T) == 0,
+ "check trigger arg for last src->dest\n");
+}
+
+void test_ni_get_reg_value(void)
+{
+ const struct ni_route_tables *T = &private.routing_tables;
+
+ init_pci_fake();
+ unittest(ni_get_reg_value(0, O(0), T) == -1,
+ "check bad direct trigger arg for first reg->dest\n");
+ unittest(ni_get_reg_value(0, O(1), T) == 0,
+ "check direct trigger arg for first reg->dest\n");
+ unittest(ni_get_reg_value(4, O(6), T) == 4,
+ "check direct trigger arg for middle reg->dest\n");
+ unittest(ni_get_reg_value(9, O(8), T) == 9,
+ "check direct trigger arg for last reg->dest\n");
+
+ unittest(ni_get_reg_value_roffs(-1, O(0), T, 1) == -1,
+ "check bad direct trigger arg for first reg->dest w/offs\n");
+ unittest(ni_get_reg_value_roffs(0, O(1), T, 0) == 0,
+ "check direct trigger arg for first reg->dest w/offs\n");
+ unittest(ni_get_reg_value_roffs(3, O(6), T, 1) == 4,
+ "check direct trigger arg for middle reg->dest w/offs\n");
+ unittest(ni_get_reg_value_roffs(7, O(8), T, 2) == 9,
+ "check direct trigger arg for last reg->dest w/offs\n");
+
+ unittest(ni_get_reg_value(O(0), O(0), T) == -1,
+ "check bad trigger arg for first src->dest\n");
+ unittest(ni_get_reg_value(O(0), O(1), T) == 0,
+ "check trigger arg for first src->dest\n");
+ unittest(ni_get_reg_value(O(5), O(6), T) == 5,
+ "check trigger arg for middle src->dest\n");
+ unittest(ni_get_reg_value(O(8), O(9), T) == 8,
+ "check trigger arg for last src->dest\n");
+}
+
+/* **** BEGIN simple module entry/exit functions **** */
+static int __init ni_routes_unittest(void)
+{
+ const unittest_fptr unit_tests[] = {
+ (unittest_fptr)test_ni_assign_device_routes,
+ (unittest_fptr)test_ni_sort_device_routes,
+ (unittest_fptr)test_ni_find_route_set,
+ (unittest_fptr)test_ni_route_set_has_source,
+ (unittest_fptr)test_ni_route_to_register,
+ (unittest_fptr)test_ni_lookup_route_register,
+ (unittest_fptr)test_route_is_valid,
+ (unittest_fptr)test_ni_is_cmd_dest,
+ (unittest_fptr)test_channel_is_pfi,
+ (unittest_fptr)test_channel_is_rtsi,
+ (unittest_fptr)test_ni_count_valid_routes,
+ (unittest_fptr)test_ni_get_valid_routes,
+ (unittest_fptr)test_ni_find_route_source,
+ (unittest_fptr)test_route_register_is_valid,
+ (unittest_fptr)test_ni_check_trigger_arg,
+ (unittest_fptr)test_ni_get_reg_value,
+ NULL,
+ };
+
+ exec_unittests("ni_routes", unit_tests);
+ return 0;
+}
+
+static void __exit ni_routes_unittest_exit(void) { }
+
+module_init(ni_routes_unittest);
+module_exit(ni_routes_unittest_exit);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi unit-tests for ni_routes module");
+MODULE_LICENSE("GPL");
+/* **** END simple module entry/exit functions **** */
projects / linux-2.6-microblaze.git / commitdiff