// SPDX-License-Identifier: GPL-2.0
-/* Copyright(c) 2013 - 2018 Intel Corporation. */
+/* Copyright(c) 2013 - 2021 Intel Corporation. */
#include <linux/etherdevice.h>
#include <linux/of_net.h>
static int i40e_setup_misc_vector(struct i40e_pf *pf);
static void i40e_determine_queue_usage(struct i40e_pf *pf);
static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
-static void i40e_prep_for_reset(struct i40e_pf *pf, bool lock_acquired);
+static void i40e_prep_for_reset(struct i40e_pf *pf);
static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit,
bool lock_acquired);
static int i40e_reset(struct i40e_pf *pf);
vsi->seid);
return ret;
}
+ memset(&bw_data, 0, sizeof(bw_data));
bw_data.tc_valid_bits = enabled_tc;
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
bw_data.tc_bw_credits[i] = bw_share[i];
i40e_status ret;
int i;
+ memset(&bw_data, 0, sizeof(bw_data));
bw_data.tc_valid_bits = ch->enabled_tc;
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)
bw_data.tc_bw_credits[i] = bw_share[i];
/* Enable the TCs available on PF to all VEBs */
tc_map = i40e_pf_get_tc_map(pf);
+ if (tc_map == I40E_DEFAULT_TRAFFIC_CLASS)
+ return;
+
for (v = 0; v < I40E_MAX_VEB; v++) {
if (!pf->veb[v])
continue;
return ret;
}
+/**
+ * i40e_suspend_port_tx - Suspend port Tx
+ * @pf: PF struct
+ *
+ * Suspend a port's Tx and issue a PF reset in case of failure.
+ **/
+static int i40e_suspend_port_tx(struct i40e_pf *pf)
+{
+ struct i40e_hw *hw = &pf->hw;
+ int ret;
+
+ ret = i40e_aq_suspend_port_tx(hw, pf->mac_seid, NULL);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Suspend Port Tx failed, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, ret),
+ i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ /* Schedule PF reset to recover */
+ set_bit(__I40E_PF_RESET_REQUESTED, pf->state);
+ i40e_service_event_schedule(pf);
+ }
+
+ return ret;
+}
+
+/**
+ * i40e_hw_set_dcb_config - Program new DCBX settings into HW
+ * @pf: PF being configured
+ * @new_cfg: New DCBX configuration
+ *
+ * Program DCB settings into HW and reconfigure VEB/VSIs on
+ * given PF. Uses "Set LLDP MIB" AQC to program the hardware.
+ **/
+static int i40e_hw_set_dcb_config(struct i40e_pf *pf,
+ struct i40e_dcbx_config *new_cfg)
+{
+ struct i40e_dcbx_config *old_cfg = &pf->hw.local_dcbx_config;
+ int ret;
+
+ /* Check if need reconfiguration */
+ if (!memcmp(&new_cfg, &old_cfg, sizeof(new_cfg))) {
+ dev_dbg(&pf->pdev->dev, "No Change in DCB Config required.\n");
+ return 0;
+ }
+
+ /* Config change disable all VSIs */
+ i40e_pf_quiesce_all_vsi(pf);
+
+ /* Copy the new config to the current config */
+ *old_cfg = *new_cfg;
+ old_cfg->etsrec = old_cfg->etscfg;
+ ret = i40e_set_dcb_config(&pf->hw);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Set DCB Config failed, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, ret),
+ i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ goto out;
+ }
+
+ /* Changes in configuration update VEB/VSI */
+ i40e_dcb_reconfigure(pf);
+out:
+ /* In case of reset do not try to resume anything */
+ if (!test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) {
+ /* Re-start the VSIs if disabled */
+ ret = i40e_resume_port_tx(pf);
+ /* In case of error no point in resuming VSIs */
+ if (ret)
+ goto err;
+ i40e_pf_unquiesce_all_vsi(pf);
+ }
+err:
+ return ret;
+}
+
+/**
+ * i40e_hw_dcb_config - Program new DCBX settings into HW
+ * @pf: PF being configured
+ * @new_cfg: New DCBX configuration
+ *
+ * Program DCB settings into HW and reconfigure VEB/VSIs on
+ * given PF
+ **/
+int i40e_hw_dcb_config(struct i40e_pf *pf, struct i40e_dcbx_config *new_cfg)
+{
+ struct i40e_aqc_configure_switching_comp_ets_data ets_data;
+ u8 prio_type[I40E_MAX_TRAFFIC_CLASS] = {0};
+ u32 mfs_tc[I40E_MAX_TRAFFIC_CLASS];
+ struct i40e_dcbx_config *old_cfg;
+ u8 mode[I40E_MAX_TRAFFIC_CLASS];
+ struct i40e_rx_pb_config pb_cfg;
+ struct i40e_hw *hw = &pf->hw;
+ u8 num_ports = hw->num_ports;
+ bool need_reconfig;
+ int ret = -EINVAL;
+ u8 lltc_map = 0;
+ u8 tc_map = 0;
+ u8 new_numtc;
+ u8 i;
+
+ dev_dbg(&pf->pdev->dev, "Configuring DCB registers directly\n");
+ /* Un-pack information to Program ETS HW via shared API
+ * numtc, tcmap
+ * LLTC map
+ * ETS/NON-ETS arbiter mode
+ * max exponent (credit refills)
+ * Total number of ports
+ * PFC priority bit-map
+ * Priority Table
+ * BW % per TC
+ * Arbiter mode between UPs sharing same TC
+ * TSA table (ETS or non-ETS)
+ * EEE enabled or not
+ * MFS TC table
+ */
+
+ new_numtc = i40e_dcb_get_num_tc(new_cfg);
+
+ memset(&ets_data, 0, sizeof(ets_data));
+ for (i = 0; i < new_numtc; i++) {
+ tc_map |= BIT(i);
+ switch (new_cfg->etscfg.tsatable[i]) {
+ case I40E_IEEE_TSA_ETS:
+ prio_type[i] = I40E_DCB_PRIO_TYPE_ETS;
+ ets_data.tc_bw_share_credits[i] =
+ new_cfg->etscfg.tcbwtable[i];
+ break;
+ case I40E_IEEE_TSA_STRICT:
+ prio_type[i] = I40E_DCB_PRIO_TYPE_STRICT;
+ lltc_map |= BIT(i);
+ ets_data.tc_bw_share_credits[i] =
+ I40E_DCB_STRICT_PRIO_CREDITS;
+ break;
+ default:
+ /* Invalid TSA type */
+ need_reconfig = false;
+ goto out;
+ }
+ }
+
+ old_cfg = &hw->local_dcbx_config;
+ /* Check if need reconfiguration */
+ need_reconfig = i40e_dcb_need_reconfig(pf, old_cfg, new_cfg);
+
+ /* If needed, enable/disable frame tagging, disable all VSIs
+ * and suspend port tx
+ */
+ if (need_reconfig) {
+ /* Enable DCB tagging only when more than one TC */
+ if (new_numtc > 1)
+ pf->flags |= I40E_FLAG_DCB_ENABLED;
+ else
+ pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+
+ set_bit(__I40E_PORT_SUSPENDED, pf->state);
+ /* Reconfiguration needed quiesce all VSIs */
+ i40e_pf_quiesce_all_vsi(pf);
+ ret = i40e_suspend_port_tx(pf);
+ if (ret)
+ goto err;
+ }
+
+ /* Configure Port ETS Tx Scheduler */
+ ets_data.tc_valid_bits = tc_map;
+ ets_data.tc_strict_priority_flags = lltc_map;
+ ret = i40e_aq_config_switch_comp_ets
+ (hw, pf->mac_seid, &ets_data,
+ i40e_aqc_opc_modify_switching_comp_ets, NULL);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "Modify Port ETS failed, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, ret),
+ i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ goto out;
+ }
+
+ /* Configure Rx ETS HW */
+ memset(&mode, I40E_DCB_ARB_MODE_ROUND_ROBIN, sizeof(mode));
+ i40e_dcb_hw_set_num_tc(hw, new_numtc);
+ i40e_dcb_hw_rx_fifo_config(hw, I40E_DCB_ARB_MODE_ROUND_ROBIN,
+ I40E_DCB_ARB_MODE_STRICT_PRIORITY,
+ I40E_DCB_DEFAULT_MAX_EXPONENT,
+ lltc_map);
+ i40e_dcb_hw_rx_cmd_monitor_config(hw, new_numtc, num_ports);
+ i40e_dcb_hw_rx_ets_bw_config(hw, new_cfg->etscfg.tcbwtable, mode,
+ prio_type);
+ i40e_dcb_hw_pfc_config(hw, new_cfg->pfc.pfcenable,
+ new_cfg->etscfg.prioritytable);
+ i40e_dcb_hw_rx_up2tc_config(hw, new_cfg->etscfg.prioritytable);
+
+ /* Configure Rx Packet Buffers in HW */
+ for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
+ mfs_tc[i] = pf->vsi[pf->lan_vsi]->netdev->mtu;
+ mfs_tc[i] += I40E_PACKET_HDR_PAD;
+ }
+
+ i40e_dcb_hw_calculate_pool_sizes(hw, num_ports,
+ false, new_cfg->pfc.pfcenable,
+ mfs_tc, &pb_cfg);
+ i40e_dcb_hw_rx_pb_config(hw, &pf->pb_cfg, &pb_cfg);
+
+ /* Update the local Rx Packet buffer config */
+ pf->pb_cfg = pb_cfg;
+
+ /* Inform the FW about changes to DCB configuration */
+ ret = i40e_aq_dcb_updated(&pf->hw, NULL);
+ if (ret) {
+ dev_info(&pf->pdev->dev,
+ "DCB Updated failed, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, ret),
+ i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ goto out;
+ }
+
+ /* Update the port DCBx configuration */
+ *old_cfg = *new_cfg;
+
+ /* Changes in configuration update VEB/VSI */
+ i40e_dcb_reconfigure(pf);
+out:
+ /* Re-start the VSIs if disabled */
+ if (need_reconfig) {
+ ret = i40e_resume_port_tx(pf);
+
+ clear_bit(__I40E_PORT_SUSPENDED, pf->state);
+ /* In case of error no point in resuming VSIs */
+ if (ret)
+ goto err;
+
+ /* Wait for the PF's queues to be disabled */
+ ret = i40e_pf_wait_queues_disabled(pf);
+ if (ret) {
+ /* Schedule PF reset to recover */
+ set_bit(__I40E_PF_RESET_REQUESTED, pf->state);
+ i40e_service_event_schedule(pf);
+ goto err;
+ } else {
+ i40e_pf_unquiesce_all_vsi(pf);
+ set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
+ set_bit(__I40E_CLIENT_L2_CHANGE, pf->state);
+ }
+ /* registers are set, lets apply */
+ if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB)
+ ret = i40e_hw_set_dcb_config(pf, new_cfg);
+ }
+
+err:
+ return ret;
+}
+
+/**
+ * i40e_dcb_sw_default_config - Set default DCB configuration when DCB in SW
+ * @pf: PF being queried
+ *
+ * Set default DCB configuration in case DCB is to be done in SW.
+ **/
+int i40e_dcb_sw_default_config(struct i40e_pf *pf)
+{
+ struct i40e_dcbx_config *dcb_cfg = &pf->hw.local_dcbx_config;
+ struct i40e_aqc_configure_switching_comp_ets_data ets_data;
+ struct i40e_hw *hw = &pf->hw;
+ int err;
+
+ if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB) {
+ /* Update the local cached instance with TC0 ETS */
+ memset(&pf->tmp_cfg, 0, sizeof(struct i40e_dcbx_config));
+ pf->tmp_cfg.etscfg.willing = I40E_IEEE_DEFAULT_ETS_WILLING;
+ pf->tmp_cfg.etscfg.maxtcs = 0;
+ pf->tmp_cfg.etscfg.tcbwtable[0] = I40E_IEEE_DEFAULT_ETS_TCBW;
+ pf->tmp_cfg.etscfg.tsatable[0] = I40E_IEEE_TSA_ETS;
+ pf->tmp_cfg.pfc.willing = I40E_IEEE_DEFAULT_PFC_WILLING;
+ pf->tmp_cfg.pfc.pfccap = I40E_MAX_TRAFFIC_CLASS;
+ /* FW needs one App to configure HW */
+ pf->tmp_cfg.numapps = I40E_IEEE_DEFAULT_NUM_APPS;
+ pf->tmp_cfg.app[0].selector = I40E_APP_SEL_ETHTYPE;
+ pf->tmp_cfg.app[0].priority = I40E_IEEE_DEFAULT_APP_PRIO;
+ pf->tmp_cfg.app[0].protocolid = I40E_APP_PROTOID_FCOE;
+
+ return i40e_hw_set_dcb_config(pf, &pf->tmp_cfg);
+ }
+
+ memset(&ets_data, 0, sizeof(ets_data));
+ ets_data.tc_valid_bits = I40E_DEFAULT_TRAFFIC_CLASS; /* TC0 only */
+ ets_data.tc_strict_priority_flags = 0; /* ETS */
+ ets_data.tc_bw_share_credits[0] = I40E_IEEE_DEFAULT_ETS_TCBW; /* 100% to TC0 */
+
+ /* Enable ETS on the Physical port */
+ err = i40e_aq_config_switch_comp_ets
+ (hw, pf->mac_seid, &ets_data,
+ i40e_aqc_opc_enable_switching_comp_ets, NULL);
+ if (err) {
+ dev_info(&pf->pdev->dev,
+ "Enable Port ETS failed, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, err),
+ i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ err = -ENOENT;
+ goto out;
+ }
+
+ /* Update the local cached instance with TC0 ETS */
+ dcb_cfg->etscfg.willing = I40E_IEEE_DEFAULT_ETS_WILLING;
+ dcb_cfg->etscfg.cbs = 0;
+ dcb_cfg->etscfg.maxtcs = I40E_MAX_TRAFFIC_CLASS;
+ dcb_cfg->etscfg.tcbwtable[0] = I40E_IEEE_DEFAULT_ETS_TCBW;
+
+out:
+ return err;
+}
+
/**
* i40e_init_pf_dcb - Initialize DCB configuration
* @pf: PF being configured
static int i40e_init_pf_dcb(struct i40e_pf *pf)
{
struct i40e_hw *hw = &pf->hw;
- int err = 0;
+ int err;
/* Do not enable DCB for SW1 and SW2 images even if the FW is capable
* Also do not enable DCBx if FW LLDP agent is disabled
*/
- if ((pf->hw_features & I40E_HW_NO_DCB_SUPPORT) ||
- (pf->flags & I40E_FLAG_DISABLE_FW_LLDP)) {
- dev_info(&pf->pdev->dev, "DCB is not supported or FW LLDP is disabled\n");
+ if (pf->hw_features & I40E_HW_NO_DCB_SUPPORT) {
+ dev_info(&pf->pdev->dev, "DCB is not supported.\n");
err = I40E_NOT_SUPPORTED;
goto out;
}
-
+ if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP) {
+ dev_info(&pf->pdev->dev, "FW LLDP is disabled, attempting SW DCB\n");
+ err = i40e_dcb_sw_default_config(pf);
+ if (err) {
+ dev_info(&pf->pdev->dev, "Could not initialize SW DCB\n");
+ goto out;
+ }
+ dev_info(&pf->pdev->dev, "SW DCB initialization succeeded.\n");
+ pf->dcbx_cap = DCB_CAP_DCBX_HOST |
+ DCB_CAP_DCBX_VER_IEEE;
+ /* at init capable but disabled */
+ pf->flags |= I40E_FLAG_DCB_CAPABLE;
+ pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ goto out;
+ }
err = i40e_init_dcb(hw, true);
if (!err) {
/* Device/Function is not DCBX capable */
}
#endif /* CONFIG_I40E_DCB */
+/**
+ * i40e_set_lldp_forwarding - set forwarding of lldp frames
+ * @pf: PF being configured
+ * @enable: if forwarding to OS shall be enabled
+ *
+ * Toggle forwarding of lldp frames behavior,
+ * When passing DCB control from firmware to software
+ * lldp frames must be forwarded to the software based
+ * lldp agent.
+ */
+void i40e_set_lldp_forwarding(struct i40e_pf *pf, bool enable)
+{
+ if (pf->lan_vsi == I40E_NO_VSI)
+ return;
+
+ if (!pf->vsi[pf->lan_vsi])
+ return;
+
+ /* No need to check the outcome, commands may fail
+ * if desired value is already set
+ */
+ i40e_aq_add_rem_control_packet_filter(&pf->hw, NULL, ETH_P_LLDP,
+ I40E_AQC_ADD_CONTROL_PACKET_FLAGS_TX |
+ I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC,
+ pf->vsi[pf->lan_vsi]->seid, 0,
+ enable, NULL, NULL);
+
+ i40e_aq_add_rem_control_packet_filter(&pf->hw, NULL, ETH_P_LLDP,
+ I40E_AQC_ADD_CONTROL_PACKET_FLAGS_RX |
+ I40E_AQC_ADD_CONTROL_PACKET_FLAGS_IGNORE_MAC,
+ pf->vsi[pf->lan_vsi]->seid, 0,
+ enable, NULL, NULL);
+}
+
/**
* i40e_print_link_message - print link up or down
* @vsi: the VSI for which link needs a message
TCP_FLAG_FIN |
TCP_FLAG_CWR) >> 16);
wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
-
udp_tunnel_get_rx_info(netdev);
return 0;
*
* Resets PF and reinitializes PFs VSI.
*/
- i40e_prep_for_reset(pf, lock_acquired);
+ i40e_prep_for_reset(pf);
i40e_reset_and_rebuild(pf, true, lock_acquired);
} else if (reset_flags & BIT_ULL(__I40E_REINIT_REQUESTED)) {
int ret = 0;
u8 type;
+ /* X710-T*L 2.5G and 5G speeds don't support DCB */
+ if (I40E_IS_X710TL_DEVICE(hw->device_id) &&
+ (hw->phy.link_info.link_speed &
+ ~(I40E_LINK_SPEED_2_5GB | I40E_LINK_SPEED_5GB)) &&
+ !(pf->flags & I40E_FLAG_DCB_CAPABLE))
+ /* let firmware decide if the DCB should be disabled */
+ pf->flags |= I40E_FLAG_DCB_CAPABLE;
+
/* Not DCB capable or capability disabled */
if (!(pf->flags & I40E_FLAG_DCB_CAPABLE))
return ret;
/* Get updated DCBX data from firmware */
ret = i40e_get_dcb_config(&pf->hw);
if (ret) {
- dev_info(&pf->pdev->dev,
- "Failed querying DCB configuration data from firmware, err %s aq_err %s\n",
- i40e_stat_str(&pf->hw, ret),
- i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+ /* X710-T*L 2.5G and 5G speeds don't support DCB */
+ if (I40E_IS_X710TL_DEVICE(hw->device_id) &&
+ (hw->phy.link_info.link_speed &
+ (I40E_LINK_SPEED_2_5GB | I40E_LINK_SPEED_5GB))) {
+ dev_warn(&pf->pdev->dev,
+ "DCB is not supported for X710-T*L 2.5/5G speeds\n");
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
+ } else {
+ dev_info(&pf->pdev->dev,
+ "Failed querying DCB configuration data from firmware, err %s aq_err %s\n",
+ i40e_stat_str(&pf->hw, ret),
+ i40e_aq_str(&pf->hw,
+ pf->hw.aq.asq_last_status));
+ }
goto exit;
}
u8 new_link_speed, old_link_speed;
i40e_status status;
bool new_link, old_link;
+#ifdef CONFIG_I40E_DCB
+ int err;
+#endif /* CONFIG_I40E_DCB */
/* set this to force the get_link_status call to refresh state */
pf->hw.phy.get_link_info = true;
if (pf->flags & I40E_FLAG_PTP)
i40e_ptp_set_increment(pf);
+#ifdef CONFIG_I40E_DCB
+ if (new_link == old_link)
+ return;
+ /* Not SW DCB so firmware will take care of default settings */
+ if (pf->dcbx_cap & DCB_CAP_DCBX_LLD_MANAGED)
+ return;
+
+ /* We cover here only link down, as after link up in case of SW DCB
+ * SW LLDP agent will take care of setting it up
+ */
+ if (!new_link) {
+ dev_dbg(&pf->pdev->dev, "Reconfig DCB to single TC as result of Link Down\n");
+ memset(&pf->tmp_cfg, 0, sizeof(pf->tmp_cfg));
+ err = i40e_dcb_sw_default_config(pf);
+ if (err) {
+ pf->flags &= ~(I40E_FLAG_DCB_CAPABLE |
+ I40E_FLAG_DCB_ENABLED);
+ } else {
+ pf->dcbx_cap = DCB_CAP_DCBX_HOST |
+ DCB_CAP_DCBX_VER_IEEE;
+ pf->flags |= I40E_FLAG_DCB_CAPABLE;
+ pf->flags &= ~I40E_FLAG_DCB_ENABLED;
+ }
+ }
+#endif /* CONFIG_I40E_DCB */
}
/**
* precedence before starting a new reset sequence.
*/
if (test_bit(__I40E_RESET_INTR_RECEIVED, pf->state)) {
- i40e_prep_for_reset(pf, false);
+ i40e_prep_for_reset(pf);
i40e_reset(pf);
i40e_rebuild(pf, false, false);
}
switch (opcode) {
case i40e_aqc_opc_get_link_status:
+ rtnl_lock();
i40e_handle_link_event(pf, &event);
+ rtnl_unlock();
break;
case i40e_aqc_opc_send_msg_to_pf:
ret = i40e_vc_process_vf_msg(pf,
/**
* i40e_prep_for_reset - prep for the core to reset
* @pf: board private structure
- * @lock_acquired: indicates whether or not the lock has been acquired
- * before this function was called.
*
* Close up the VFs and other things in prep for PF Reset.
**/
-static void i40e_prep_for_reset(struct i40e_pf *pf, bool lock_acquired)
+static void i40e_prep_for_reset(struct i40e_pf *pf)
{
struct i40e_hw *hw = &pf->hw;
i40e_status ret = 0;
dev_dbg(&pf->pdev->dev, "Tearing down internal switch for reset\n");
/* quiesce the VSIs and their queues that are not already DOWN */
- /* pf_quiesce_all_vsi modifies netdev structures -rtnl_lock needed */
- if (!lock_acquired)
- rtnl_lock();
i40e_pf_quiesce_all_vsi(pf);
- if (!lock_acquired)
- rtnl_unlock();
for (v = 0; v < pf->num_alloc_vsi; v++) {
if (pf->vsi[v])
goto end_core_reset;
}
- /* Enable FW to write a default DCB config on link-up */
- i40e_aq_set_dcb_parameters(hw, true, NULL);
-
-#ifdef CONFIG_I40E_DCB
- ret = i40e_init_pf_dcb(pf);
- if (ret) {
- dev_info(&pf->pdev->dev, "DCB init failed %d, disabled\n", ret);
- pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
- /* Continue without DCB enabled */
- }
-#endif /* CONFIG_I40E_DCB */
- /* do basic switch setup */
if (!lock_acquired)
rtnl_lock();
ret = i40e_setup_pf_switch(pf, reinit);
if (ret)
goto end_unlock;
+#ifdef CONFIG_I40E_DCB
+ /* Enable FW to write a default DCB config on link-up
+ * unless I40E_FLAG_TC_MQPRIO was enabled or DCB
+ * is not supported with new link speed
+ */
+ if (pf->flags & I40E_FLAG_TC_MQPRIO) {
+ i40e_aq_set_dcb_parameters(hw, false, NULL);
+ } else {
+ if (I40E_IS_X710TL_DEVICE(hw->device_id) &&
+ (hw->phy.link_info.link_speed &
+ (I40E_LINK_SPEED_2_5GB | I40E_LINK_SPEED_5GB))) {
+ i40e_aq_set_dcb_parameters(hw, false, NULL);
+ dev_warn(&pf->pdev->dev,
+ "DCB is not supported for X710-T*L 2.5/5G speeds\n");
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
+ } else {
+ i40e_aq_set_dcb_parameters(hw, true, NULL);
+ ret = i40e_init_pf_dcb(pf);
+ if (ret) {
+ dev_info(&pf->pdev->dev, "DCB init failed %d, disabled\n",
+ ret);
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
+ /* Continue without DCB enabled */
+ }
+ }
+ }
+
+#endif /* CONFIG_I40E_DCB */
+
/* The driver only wants link up/down and module qualification
* reports from firmware. Note the negative logic.
*/
*/
i40e_add_filter_to_drop_tx_flow_control_frames(&pf->hw,
pf->main_vsi_seid);
+#ifdef CONFIG_I40E_DCB
+ if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP)
+ i40e_set_lldp_forwarding(pf, true);
+#endif /* CONFIG_I40E_DCB */
/* restart the VSIs that were rebuilt and running before the reset */
i40e_pf_unquiesce_all_vsi(pf);
**/
static void i40e_handle_reset_warning(struct i40e_pf *pf, bool lock_acquired)
{
- i40e_prep_for_reset(pf, lock_acquired);
+ i40e_prep_for_reset(pf);
i40e_reset_and_rebuild(pf, false, lock_acquired);
}
u16 qcount;
vsi->req_queue_pairs = queue_count;
- i40e_prep_for_reset(pf, true);
+ i40e_prep_for_reset(pf);
pf->alloc_rss_size = new_rss_size;
need_reset = (i40e_enabled_xdp_vsi(vsi) != !!prog);
if (need_reset)
- i40e_prep_for_reset(pf, true);
+ i40e_prep_for_reset(pf);
old_prog = xchg(&vsi->xdp_prog, prog);
static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct i40e_aq_get_phy_abilities_resp abilities;
+#ifdef CONFIG_I40E_DCB
+ enum i40e_get_fw_lldp_status_resp lldp_status;
+ i40e_status status;
+#endif /* CONFIG_I40E_DCB */
struct i40e_pf *pf;
struct i40e_hw *hw;
static u16 pfs_found;
pci_set_drvdata(pdev, pf);
pci_save_state(pdev);
+#ifdef CONFIG_I40E_DCB
+ status = i40e_get_fw_lldp_status(&pf->hw, &lldp_status);
+ (!status &&
+ lldp_status == I40E_GET_FW_LLDP_STATUS_ENABLED) ?
+ (pf->flags &= ~I40E_FLAG_DISABLE_FW_LLDP) :
+ (pf->flags |= I40E_FLAG_DISABLE_FW_LLDP);
dev_info(&pdev->dev,
(pf->flags & I40E_FLAG_DISABLE_FW_LLDP) ?
"FW LLDP is disabled\n" :
/* Enable FW to write default DCB config on link-up */
i40e_aq_set_dcb_parameters(hw, true, NULL);
-#ifdef CONFIG_I40E_DCB
err = i40e_init_pf_dcb(pf);
if (err) {
dev_info(&pdev->dev, "DCB init failed %d, disabled\n", err);
*/
i40e_add_filter_to_drop_tx_flow_control_frames(&pf->hw,
pf->main_vsi_seid);
+#ifdef CONFIG_I40E_DCB
+ if (pf->flags & I40E_FLAG_DISABLE_FW_LLDP)
+ i40e_set_lldp_forwarding(pf, true);
+#endif /* CONFIG_I40E_DCB */
if ((pf->hw.device_id == I40E_DEV_ID_10G_BASE_T) ||
(pf->hw.device_id == I40E_DEV_ID_10G_BASE_T4))
/* shutdown all operations */
if (!test_bit(__I40E_SUSPENDED, pf->state))
- i40e_prep_for_reset(pf, false);
+ i40e_prep_for_reset(pf);
/* Request a slot reset */
return PCI_ERS_RESULT_NEED_RESET;
{
struct i40e_pf *pf = pci_get_drvdata(pdev);
- i40e_prep_for_reset(pf, false);
+ i40e_prep_for_reset(pf);
}
/**
if (pf->wol_en && (pf->hw_features & I40E_HW_WOL_MC_MAGIC_PKT_WAKE))
i40e_enable_mc_magic_wake(pf);
- i40e_prep_for_reset(pf, false);
+ i40e_prep_for_reset(pf);
wr32(hw, I40E_PFPM_APM,
(pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
*/
rtnl_lock();
- i40e_prep_for_reset(pf, true);
+ i40e_prep_for_reset(pf);
wr32(hw, I40E_PFPM_APM, (pf->wol_en ? I40E_PFPM_APM_APME_MASK : 0));
wr32(hw, I40E_PFPM_WUFC, (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
projects / linux-2.6-microblaze.git / commitdiff