As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---------------------------
-What: Support for NEC DDB5476 evaluation boards.
-When: June 2006
-Why: Board specific code doesn't build anymore since ~2.6.0 and no
- users have complained indicating there is no more need for these
- boards. This should really be considered a last call.
-Who: Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
What: USB driver API moves to EXPORT_SYMBOL_GPL
When: Febuary 2008
Files: include/linux/usb.h, drivers/usb/core/driver.c
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config DDB5476
- bool "NEC DDB Vrc-5476"
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5432
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the R5432-based NEC DDB Vrc-5476
- evaluation board.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
- IDE controller, PS2 keyboard, PS2 mouse, etc.
-
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
#
core-$(CONFIG_DDB5XXX_COMMON) += arch/mips/ddb5xxx/common/
-#
-# NEC DDB Vrc-5476
-#
-core-$(CONFIG_DDB5476) += arch/mips/ddb5xxx/ddb5476/
-load-$(CONFIG_DDB5476) += 0xffffffff80080000
-
#
# NEC DDB Vrc-5477
#
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Mon Apr 24 14:51:00 2006
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MIPS_EV96100 is not set
-# CONFIG_MIPS_IVR is not set
-# CONFIG_MIPS_ITE8172 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_V2PCI is not set
-# CONFIG_PNX8550_JBS is not set
-CONFIG_DDB5476=y
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM200_PCI is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_I8259=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_DDB5XXX_COMMON=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-CONFIG_CPU_R5432=y
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5432=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_ISA=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="ip=any"
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
CONFIG_DDB5477=y
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
CONFIG_PNX8550_JBS=y
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
CONFIG_PNX8550_V2PCI=y
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
CONFIG_MACH_VR41XX=y
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
CONFIG_PMC_YOSEMITE=y
mips_machgroup = MACH_GROUP_NEC_DDB;
-#if defined(CONFIG_DDB5476)
- mips_machtype = MACH_NEC_DDB5476;
- add_memory_region(0, DDB_SDRAM_SIZE, BOOT_MEM_RAM);
-#elif defined(CONFIG_DDB5477)
+#if defined(CONFIG_DDB5477)
ddb5477_runtime_detection();
add_memory_region(0, board_ram_size, BOOT_MEM_RAM);
#endif
+++ /dev/null
-#
-# Makefile for the NEC DDB Vrc-5476 specific kernel interface routines
-# under Linux.
-#
-
-obj-y += setup.o irq.o nile4_pic.o vrc5476_irq.o
-obj-$(CONFIG_KGDB) += dbg_io.o
-
-EXTRA_AFLAGS := $(CFLAGS)
+++ /dev/null
-/*
- * kgdb io functions for DDB5476. We use the second serial port.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/* ======================= CONFIG ======================== */
-
-/* [jsun] we use the second serial port for kdb */
-#define BASE 0xa60002f8
-#define MAX_BAUD 115200
-
-/* distance in bytes between two serial registers */
-#define REG_OFFSET 1
-
-/*
- * 0 - kgdb does serial init
- * 1 - kgdb skip serial init
- */
-static int remoteDebugInitialized = 0;
-
-/*
- * the default baud rate *if* kgdb does serial init
- */
-#define BAUD_DEFAULT UART16550_BAUD_38400
-
-/* ======================= END OF CONFIG ======================== */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-#define UART16550_BAUD_2400 2400
-#define UART16550_BAUD_4800 4800
-#define UART16550_BAUD_9600 9600
-#define UART16550_BAUD_19200 19200
-#define UART16550_BAUD_38400 38400
-#define UART16550_BAUD_57600 57600
-#define UART16550_BAUD_115200 115200
-
-#define UART16550_PARITY_NONE 0
-#define UART16550_PARITY_ODD 0x08
-#define UART16550_PARITY_EVEN 0x18
-#define UART16550_PARITY_MARK 0x28
-#define UART16550_PARITY_SPACE 0x38
-
-#define UART16550_DATA_5BIT 0x0
-#define UART16550_DATA_6BIT 0x1
-#define UART16550_DATA_7BIT 0x2
-#define UART16550_DATA_8BIT 0x3
-
-#define UART16550_STOP_1BIT 0x0
-#define UART16550_STOP_2BIT 0x4
-
-/* register offset */
-#define OFS_RCV_BUFFER 0
-#define OFS_TRANS_HOLD 0
-#define OFS_SEND_BUFFER 0
-#define OFS_INTR_ENABLE (1*REG_OFFSET)
-#define OFS_INTR_ID (2*REG_OFFSET)
-#define OFS_DATA_FORMAT (3*REG_OFFSET)
-#define OFS_LINE_CONTROL (3*REG_OFFSET)
-#define OFS_MODEM_CONTROL (4*REG_OFFSET)
-#define OFS_RS232_OUTPUT (4*REG_OFFSET)
-#define OFS_LINE_STATUS (5*REG_OFFSET)
-#define OFS_MODEM_STATUS (6*REG_OFFSET)
-#define OFS_RS232_INPUT (6*REG_OFFSET)
-#define OFS_SCRATCH_PAD (7*REG_OFFSET)
-
-#define OFS_DIVISOR_LSB (0*REG_OFFSET)
-#define OFS_DIVISOR_MSB (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
-#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
- /* disable interrupts */
- UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
- /* set up baud rate */
- {
- uint32 divisor;
-
- /* set DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
- /* set divisor */
- divisor = MAX_BAUD / baud;
- UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
- UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
- /* clear DIAB bit */
- UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
- }
-
- /* set data format */
- UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-
-uint8 getDebugChar(void)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
- return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
- if (!remoteDebugInitialized) {
- remoteDebugInitialized = 1;
- debugInit(BAUD_DEFAULT,
- UART16550_DATA_8BIT,
- UART16550_PARITY_NONE, UART16550_STOP_1BIT);
- }
-
- while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
- UART16550_WRITE(OFS_SEND_BUFFER, byte);
- return 1;
-}
+++ /dev/null
-/*
- * arch/mips/ddb5476/irq.c -- NEC DDB Vrc-5476 interrupt routines
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- *
- * Re-write the whole thing to use new irq.c file.
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include <asm/i8259.h>
-#include <asm/io.h>
-#include <asm/ptrace.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-#define M1543_PNP_CONFIG 0x03f0 /* PnP Config Port */
-#define M1543_PNP_INDEX 0x03f0 /* PnP Index Port */
-#define M1543_PNP_DATA 0x03f1 /* PnP Data Port */
-
-#define M1543_PNP_ALT_CONFIG 0x0370 /* Alternative PnP Config Port */
-#define M1543_PNP_ALT_INDEX 0x0370 /* Alternative PnP Index Port */
-#define M1543_PNP_ALT_DATA 0x0371 /* Alternative PnP Data Port */
-
-#define M1543_INT1_MASTER_CTRL 0x0020 /* INT_1 (master) Control Register */
-#define M1543_INT1_MASTER_MASK 0x0021 /* INT_1 (master) Mask Register */
-
-#define M1543_INT1_SLAVE_CTRL 0x00a0 /* INT_1 (slave) Control Register */
-#define M1543_INT1_SLAVE_MASK 0x00a1 /* INT_1 (slave) Mask Register */
-
-#define M1543_INT1_MASTER_ELCR 0x04d0 /* INT_1 (master) Edge/Level Control */
-#define M1543_INT1_SLAVE_ELCR 0x04d1 /* INT_1 (slave) Edge/Level Control */
-
-static void m1543_irq_setup(void)
-{
- /*
- * The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13. Not all
- * the possible IO sources in the M1543 are in use by us. We will
- * use the following mapping:
- *
- * IRQ1 - keyboard (default set by M1543)
- * IRQ3 - reserved for UART B (default set by M1543) (note that
- * the schematics for the DDB Vrc-5476 board seem to
- * indicate that IRQ3 is connected to the DS1386
- * watchdog timer interrupt output so we might have
- * a conflict)
- * IRQ4 - reserved for UART A (default set by M1543)
- * IRQ5 - parallel (default set by M1543)
- * IRQ8 - DS1386 time of day (RTC) interrupt
- * IRQ9 - USB (hardwired in ddb_setup)
- * IRQ10 - PMU (hardwired in ddb_setup)
- * IRQ12 - mouse
- * IRQ14,15 - IDE controller (need to be confirmed, jsun)
- */
-
- /*
- * Assing mouse interrupt to IRQ12
- */
-
- /* Enter configuration mode */
- outb(0x51, M1543_PNP_CONFIG);
- outb(0x23, M1543_PNP_CONFIG);
-
- /* Select logical device 7 (Keyboard) */
- outb(0x07, M1543_PNP_INDEX);
- outb(0x07, M1543_PNP_DATA);
-
- /* Select IRQ12 */
- outb(0x72, M1543_PNP_INDEX);
- outb(0x0c, M1543_PNP_DATA);
-
- /* Leave configration mode */
- outb(0xbb, M1543_PNP_CONFIG);
-}
-
-static void nile4_irq_setup(void)
-{
- int i;
-
- /* Map all interrupts to CPU int #0 (IP2) */
- nile4_map_irq_all(0);
-
- /* PCI INTA#-E# must be level triggered */
- nile4_set_pci_irq_level_or_edge(0, 1);
- nile4_set_pci_irq_level_or_edge(1, 1);
- nile4_set_pci_irq_level_or_edge(2, 1);
- nile4_set_pci_irq_level_or_edge(3, 1);
-
- /* PCI INTA#, B#, D# must be active low, INTC# must be active high */
- nile4_set_pci_irq_polarity(0, 0);
- nile4_set_pci_irq_polarity(1, 0);
- nile4_set_pci_irq_polarity(2, 1);
- nile4_set_pci_irq_polarity(3, 0);
-
- for (i = 0; i < 16; i++)
- nile4_clear_irq(i);
-
- /* Enable CPU int #0 */
- nile4_enable_irq_output(0);
-
- /* memory resource acquire in ddb_setup */
-}
-
-static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
-static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-extern void mips_cpu_irq_init(u32 irq_base);
-extern void vrc5476_irq_init(u32 irq_base);
-
-extern void vrc5476_irq_dispatch(struct pt_regs *regs);
-
-asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
-{
- unsigned int pending = read_c0_cause() & read_c0_status();
-
- if (pending & STATUSF_IP7)
- do_IRQ(CPU_IRQ_BASE + 7, regs);
- else if (pending & STATUSF_IP2)
- vrc5476_irq_dispatch(regs);
- else if (pending & STATUSF_IP3)
- do_IRQ(CPU_IRQ_BASE + 3, regs);
- else if (pending & STATUSF_IP4)
- do_IRQ(CPU_IRQ_BASE + 4, regs);
- else if (pending & STATUSF_IP5)
- do_IRQ(CPU_IRQ_BASE + 5, regs);
- else if (pending & STATUSF_IP6)
- do_IRQ(CPU_IRQ_BASE + 6, regs);
- else if (pending & STATUSF_IP0)
- do_IRQ(CPU_IRQ_BASE, regs);
- else if (pending & STATUSF_IP1)
- do_IRQ(CPU_IRQ_BASE + 1, regs);
-
- vrc5476_irq_dispatch(regs);
-}
-
-void __init arch_init_irq(void)
-{
- /* hardware initialization */
- nile4_irq_setup();
- m1543_irq_setup();
-
- /* controller setup */
- init_i8259_irqs();
- vrc5476_irq_init(VRC5476_IRQ_BASE);
- mips_cpu_irq_init(CPU_IRQ_BASE);
-
- /* setup cascade interrupts */
- setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade);
- setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade);
-
- /* setup error interrupts for debugging */
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error);
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error);
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error);
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
- setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
-}
+++ /dev/null
-/*
- * arch/mips/ddb5476/nile4.c --
- * low-level PIC code for NEC Vrc-5476 (Nile 4)
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- */
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-
-/*
- * Interrupt Programming
- */
-void nile4_map_irq(int nile4_irq, int cpu_irq)
-{
- u32 offset, t;
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- t = ddb_in32(offset);
- t &= ~(7 << (nile4_irq * 4));
- t |= cpu_irq << (nile4_irq * 4);
- ddb_out32(offset, t);
-}
-
-void nile4_map_irq_all(int cpu_irq)
-{
- u32 all, t;
-
- all = cpu_irq;
- all |= all << 4;
- all |= all << 8;
- all |= all << 16;
- t = ddb_in32(DDB_INTCTRL);
- t &= 0x88888888;
- t |= all;
- ddb_out32(DDB_INTCTRL, t);
- t = ddb_in32(DDB_INTCTRL + 4);
- t &= 0x88888888;
- t |= all;
- ddb_out32(DDB_INTCTRL + 4, t);
-}
-
-void nile4_enable_irq(int nile4_irq)
-{
- u32 offset, t;
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- t = ddb_in32(offset);
- t |= 8 << (nile4_irq * 4);
- ddb_out32(offset, t);
-}
-
-void nile4_disable_irq(int nile4_irq)
-{
- u32 offset, t;
-
- offset = DDB_INTCTRL;
- if (nile4_irq >= 8) {
- offset += 4;
- nile4_irq -= 8;
- }
- t = ddb_in32(offset);
- t &= ~(8 << (nile4_irq * 4));
- ddb_out32(offset, t);
-}
-
-void nile4_disable_irq_all(void)
-{
- ddb_out32(DDB_INTCTRL, 0);
- ddb_out32(DDB_INTCTRL + 4, 0);
-}
-
-u16 nile4_get_irq_stat(int cpu_irq)
-{
- return ddb_in16(DDB_INTSTAT0 + cpu_irq * 2);
-}
-
-void nile4_enable_irq_output(int cpu_irq)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTSTAT1 + 4);
- t |= 1 << (16 + cpu_irq);
- ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_disable_irq_output(int cpu_irq)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTSTAT1 + 4);
- t &= ~(1 << (16 + cpu_irq));
- ddb_out32(DDB_INTSTAT1, t);
-}
-
-void nile4_set_pci_irq_polarity(int pci_irq, int high)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTPPES);
- if (high)
- t &= ~(1 << (pci_irq * 2));
- else
- t |= 1 << (pci_irq * 2);
- ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_set_pci_irq_level_or_edge(int pci_irq, int level)
-{
- u32 t;
-
- t = ddb_in32(DDB_INTPPES);
- if (level)
- t |= 2 << (pci_irq * 2);
- else
- t &= ~(2 << (pci_irq * 2));
- ddb_out32(DDB_INTPPES, t);
-}
-
-void nile4_clear_irq(int nile4_irq)
-{
- ddb_out32(DDB_INTCLR, 1 << nile4_irq);
-}
-
-void nile4_clear_irq_mask(u32 mask)
-{
- ddb_out32(DDB_INTCLR, mask);
-}
-
-u8 nile4_i8259_iack(void)
-{
- u8 irq;
- u32 reg;
-
- /* Set window 0 for interrupt acknowledge */
- reg = ddb_in32(DDB_PCIINIT0);
-
- ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IACK, 0, DDB_PCI_ACCESS_32);
- irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
- /* restore window 0 for PCI I/O space */
- // ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
- ddb_out32(DDB_PCIINIT0, reg);
-
- /* i8269.c set the base vector to be 0x0 */
- return irq + I8259_IRQ_BASE;
-}
-
-#if defined(CONFIG_RUNTIME_DEBUG)
-void nile4_dump_irq_status(void)
-{
- printk(KERN_DEBUG "
- CPUSTAT = %p:%p\n", (void *) ddb_in32(DDB_CPUSTAT + 4),
- (void *) ddb_in32(DDB_CPUSTAT));
- printk(KERN_DEBUG "
- INTCTRL = %p:%p\n", (void *) ddb_in32(DDB_INTCTRL + 4),
- (void *) ddb_in32(DDB_INTCTRL));
- printk(KERN_DEBUG
- "INTSTAT0 = %p:%p\n",
- (void *) ddb_in32(DDB_INTSTAT0 + 4),
- (void *) ddb_in32(DDB_INTSTAT0));
- printk(KERN_DEBUG
- "INTSTAT1 = %p:%p\n",
- (void *) ddb_in32(DDB_INTSTAT1 + 4),
- (void *) ddb_in32(DDB_INTSTAT1));
- printk(KERN_DEBUG
- "INTCLR = %p:%p\n", (void *) ddb_in32(DDB_INTCLR + 4),
- (void *) ddb_in32(DDB_INTCLR));
- printk(KERN_DEBUG
- "INTPPES = %p:%p\n", (void *) ddb_in32(DDB_INTPPES + 4),
- (void *) ddb_in32(DDB_INTPPES));
-}
-#endif
+++ /dev/null
-/*
- * arch/mips/ddb5476/setup.c -- NEC DDB Vrc-5476 setup routines
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- * Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <linux/init.h>
-#include <linux/kbd_ll.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-
-#include <asm/addrspace.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
-#include <asm/reboot.h>
-#include <asm/gdb-stub.h>
-#include <asm/time.h>
-#include <asm/debug.h>
-#include <asm/traps.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-// #define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */
-
-#ifdef USE_CPU_COUNTER_TIMER
-
-#define CPU_COUNTER_FREQUENCY 83000000
-#else
-/* otherwise we use general purpose timer */
-#define TIMER_FREQUENCY 83000000
-#define TIMER_BASE DDB_T2CTRL
-#define TIMER_IRQ (VRC5476_IRQ_BASE + VRC5476_IRQ_GPT)
-#endif
-
-static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000;
-
-static void ddb_machine_restart(char *command)
-{
- u32 t;
-
- /* PCI cold reset */
- t = ddb_in32(DDB_PCICTRL + 4);
- t |= 0x40000000;
- ddb_out32(DDB_PCICTRL + 4, t);
- /* CPU cold reset */
- t = ddb_in32(DDB_CPUSTAT);
- t |= 1;
- ddb_out32(DDB_CPUSTAT, t);
- /* Call the PROM */
- back_to_prom();
-}
-
-static void ddb_machine_halt(void)
-{
- printk(KERN_NOTICE "DDB Vrc-5476 halted.\n");
- while (1);
-}
-
-static void ddb_machine_power_off(void)
-{
- printk(KERN_NOTICE "DDB Vrc-5476 halted. Please turn off the power.\n");
- while (1);
-}
-
-extern void rtc_ds1386_init(unsigned long base);
-
-static void __init ddb_time_init(void)
-{
-#if defined(USE_CPU_COUNTER_TIMER)
- mips_hpt_frequency = CPU_COUNTER_FREQUENCY;
-#endif
-
- /* we have ds1396 RTC chip */
- rtc_ds1386_init(KSEG1ADDR(DDB_PCI_MEM_BASE));
-}
-
-
-extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
-static void __init ddb_timer_setup(struct irqaction *irq)
-{
-#if defined(USE_CPU_COUNTER_TIMER)
-
- unsigned int count;
-
- /* we are using the cpu counter for timer interrupts */
- setup_irq(CPU_IRQ_BASE + 7, irq);
-
- /* to generate the first timer interrupt */
- count = read_c0_count();
- write_c0_compare(count + 1000);
-
-#else
-
- ddb_out32(TIMER_BASE, TIMER_FREQUENCY/HZ);
- ddb_out32(TIMER_BASE+4, 0x1); /* enable timer */
- setup_irq(TIMER_IRQ, irq);
-#endif
-}
-
-static struct {
- struct resource dma1;
- struct resource timer;
- struct resource rtc;
- struct resource dma_page_reg;
- struct resource dma2;
-} ddb5476_ioport = {
- {
- .start = 0x00,
- .end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x70,
- .end = 0x7f,
- .name = "rtc",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x80,
- .end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0xc0,
- .end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
- }
-};
-
-static struct {
- struct resource nile4;
-} ddb5476_iomem = {
- {
- .start = DDB_BASE,
- .end = DDB_BASE + DDB_SIZE - 1,
- .name = "Nile 4",
- .flags = IORESOURCE_BUSY
- }
-};
-
-
-static void ddb5476_board_init(void);
-
-void __init plat_mem_setup(void)
-{
- set_io_port_base(KSEG1ADDR(DDB_PCI_IO_BASE));
-
- board_time_init = ddb_time_init;
- board_timer_setup = ddb_timer_setup;
-
- _machine_restart = ddb_machine_restart;
- _machine_halt = ddb_machine_halt;
- pm_power_off = ddb_machine_power_off;
-
- /* request io port/mem resources */
- if (request_resource(&ioport_resource, &ddb5476_ioport.dma1) ||
- request_resource(&ioport_resource, &ddb5476_ioport.timer) ||
- request_resource(&ioport_resource, &ddb5476_ioport.rtc) ||
- request_resource(&ioport_resource,
- &ddb5476_ioport.dma_page_reg)
- || request_resource(&ioport_resource, &ddb5476_ioport.dma2)
- || request_resource(&iomem_resource, &ddb5476_iomem.nile4)) {
- printk
- ("ddb_setup - requesting oo port resources failed.\n");
- for (;;);
- }
-
- /* Reboot on panic */
- panic_timeout = 180;
-
- /* [jsun] we need to set BAR0 so that SDRAM 0 appears at 0x0 in PCI */
- /* *(long*)0xbfa00218 = 0x8; */
-
- /* board initialization stuff */
- ddb5476_board_init();
-}
-
-/*
- * We don't trust bios. We essentially does hardware re-initialization
- * as complete as possible, as far as we know we can safely do.
- */
-static void ddb5476_board_init(void)
-{
- /* ----------- setup PDARs ------------ */
- /* check SDRAM0, whether we are on MEM bus does not matter */
- db_assert((ddb_in32(DDB_SDRAM0) & 0xffffffef) ==
- ddb_calc_pdar(DDB_SDRAM_BASE, DDB_SDRAM_SIZE, 32, 0, 1));
-
- /* SDRAM1 should be turned off. What is this for anyway ? */
- db_assert( (ddb_in32(DDB_SDRAM1) & 0xf) == 0);
-
- /* flash 1&2, DDB status, DDB control */
- ddb_set_pdar(DDB_DCS2, DDB_DCS2_BASE, DDB_DCS2_SIZE, 16, 0, 0);
- ddb_set_pdar(DDB_DCS3, DDB_DCS3_BASE, DDB_DCS3_SIZE, 16, 0, 0);
- ddb_set_pdar(DDB_DCS4, DDB_DCS4_BASE, DDB_DCS4_SIZE, 8, 0, 0);
- ddb_set_pdar(DDB_DCS5, DDB_DCS5_BASE, DDB_DCS5_SIZE, 8, 0, 0);
-
- /* shut off other pdar so they don't accidentally get into the way */
- ddb_set_pdar(DDB_DCS6, 0xffffffff, 0, 32, 0, 0);
- ddb_set_pdar(DDB_DCS7, 0xffffffff, 0, 32, 0, 0);
- ddb_set_pdar(DDB_DCS8, 0xffffffff, 0, 32, 0, 0);
-
- /* verify VRC5477 base addr */
- /* don't care about some details */
- db_assert((ddb_in32(DDB_INTCS) & 0xffffff0f) ==
- ddb_calc_pdar(DDB_INTCS_BASE, DDB_INTCS_SIZE, 8, 0, 0));
-
- /* verify BOOT ROM addr */
- /* don't care about some details */
- db_assert((ddb_in32(DDB_BOOTCS) & 0xffffff0f) ==
- ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0));
-
- /* setup PCI windows - window1 for MEM/config, window0 for IO */
- ddb_set_pdar(DDB_PCIW0, DDB_PCI_IO_BASE, DDB_PCI_IO_SIZE, 32, 0, 1);
- ddb_set_pmr(DDB_PCIINIT0, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32);
-
- ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
- ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
-
- /* ----------- setup PDARs ------------ */
- /* this is problematic - it will reset Aladin which cause we loose
- * serial port, and we don't know how to set up Aladin chip again.
- */
- // ddb_pci_reset_bus();
-
- ddb_out32(DDB_BAR0, 0x00000008);
-
- ddb_out32(DDB_BARC, 0xffffffff);
- ddb_out32(DDB_BARB, 0xffffffff);
- ddb_out32(DDB_BAR1, 0xffffffff);
- ddb_out32(DDB_BAR2, 0xffffffff);
- ddb_out32(DDB_BAR3, 0xffffffff);
- ddb_out32(DDB_BAR4, 0xffffffff);
- ddb_out32(DDB_BAR5, 0xffffffff);
- ddb_out32(DDB_BAR6, 0xffffffff);
- ddb_out32(DDB_BAR7, 0xffffffff);
- ddb_out32(DDB_BAR8, 0xffffffff);
-
- /* ----------- switch PCI1 to PCI CONFIG space ------------ */
- ddb_set_pdar(DDB_PCIW1, DDB_PCI_CONFIG_BASE, DDB_PCI_CONFIG_SIZE, 32, 0, 1);
- ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_CFG, 0x0, DDB_PCI_ACCESS_32);
-
- /* ----- M1543 PCI setup ------ */
-
- /* we know M1543 PCI-ISA controller is at addr:18 */
- /* xxxx1010 makes USB at addr:13 and PMU at addr:14 */
- *(volatile unsigned char *) 0xa8040072 &= 0xf0;
- *(volatile unsigned char *) 0xa8040072 |= 0xa;
-
- /* setup USB interrupt to IRQ 9, (bit 0:3 - 0001)
- * no IOCHRDY signal, (bit 7 - 1)
- * M1543C & M7101 VID and Subsys Device ID are read-only (bit 6 - 1)
- * Make USB Master INTAJ level to edge conversion (bit 4 - 1)
- */
- *(unsigned char *) 0xa8040074 = 0xd1;
-
- /* setup PMU(SCI to IRQ 10 (bit 0:3 - 0011)
- * SCI routing to IRQ 13 disabled (bit 7 - 1)
- * SCI interrupt level to edge conversion bypassed (bit 4 - 0)
- */
- *(unsigned char *) 0xa8040076 = 0x83;
-
- /* setup IDE controller
- * enable IDE controller (bit 6 - 1)
- * IDE IDSEL to be addr:24 (bit 4:5 - 11)
- * no IDE ATA Secondary Bus Signal Pad Control (bit 3 - 0)
- * no IDE ATA Primary Bus Signal Pad Control (bit 2 - 0)
- * primary IRQ is 14, secondary is 15 (bit 1:0 - 01
- */
- // *(unsigned char*)0xa8040058 = 0x71;
- // *(unsigned char*)0xa8040058 = 0x79;
- // *(unsigned char*)0xa8040058 = 0x74; // use SIRQ, primary tri-state
- *(unsigned char *) 0xa8040058 = 0x75; // primary tri-state
-
-#if 0
- /* this is not necessary if M5229 does not use SIRQ */
- *(unsigned char *) 0xa8040044 = 0x0d; // primary to IRQ 14
- *(unsigned char *) 0xa8040075 = 0x0d; // secondary to IRQ 14
-#endif
-
- /* enable IDE in the M5229 config register 0x50 (bit 0 - 1) */
- /* M5229 IDSEL is addr:24; see above setting */
- *(unsigned char *) 0xa9000050 |= 0x1;
-
- /* enable bus master (bit 2) and IO decoding (bit 0) */
- *(unsigned char *) 0xa9000004 |= 0x5;
-
- /* enable native, copied from arch/ppc/k2boot/head.S */
- /* TODO - need volatile, need to be portable */
- *(unsigned char *) 0xa9000009 = 0xff;
-
- /* ----- end of M1543 PCI setup ------ */
-
- /* ----- reset on-board ether chip ------ */
- *((volatile u32 *) 0xa8020004) |= 1; /* decode I/O */
- *((volatile u32 *) 0xa8020010) = 0; /* set BAR address */
-
- /* send reset command */
- *((volatile u32 *) 0xa6000000) = 1; /* do a soft reset */
-
- /* disable ether chip */
- *((volatile u32 *) 0xa8020004) = 0; /* disable any decoding */
-
- /* put it into sleep */
- *((volatile u32 *) 0xa8020040) = 0x80000000;
-
- /* ----- end of reset on-board ether chip ------ */
-
- /* ----------- switch PCI1 back to PCI MEM space ------------ */
- ddb_set_pdar(DDB_PCIW1, DDB_PCI_MEM_BASE, DDB_PCI_MEM_SIZE, 32, 0, 1);
- ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
-}
+++ /dev/null
-/*
- * The irq controller for vrc5476.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/system.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static int irq_base;
-
-static void vrc5476_irq_enable(uint irq)
-{
- nile4_enable_irq(irq - irq_base);
-}
-
-static void vrc5476_irq_disable(uint irq)
-{
- nile4_disable_irq(irq - irq_base);
-}
-
-static unsigned int vrc5476_irq_startup(uint irq)
-{
- nile4_enable_irq(irq - irq_base);
- return 0;
-}
-
-#define vrc5476_irq_shutdown vrc5476_irq_disable
-
-static void vrc5476_irq_ack(uint irq)
-{
- nile4_clear_irq(irq - irq_base);
- nile4_disable_irq(irq - irq_base);
-}
-
-static void vrc5476_irq_end(uint irq)
-{
- if(!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- vrc5476_irq_enable(irq);
-}
-
-static hw_irq_controller vrc5476_irq_controller = {
- .typename = "vrc5476",
- .startup = vrc5476_irq_startup,
- .shutdown = vrc5476_irq_shutdown,
- .enable = vrc5476_irq_enable,
- .disable = vrc5476_irq_disable,
- .ack = vrc5476_irq_ack,
- .end = vrc5476_irq_end
-};
-
-void __init
-vrc5476_irq_init(u32 base)
-{
- u32 i;
-
- irq_base = base;
- for (i= base; i< base + NUM_VRC5476_IRQ; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].handler = &vrc5476_irq_controller;
- }
-}
-
-
-void
-vrc5476_irq_dispatch(struct pt_regs *regs)
-{
- u32 mask;
- int nile4_irq;
-
- mask = nile4_get_irq_stat(0);
-
- /* quick check for possible time interrupt */
- if (mask & (1 << VRC5476_IRQ_GPT)) {
- do_IRQ(VRC5476_IRQ_BASE + VRC5476_IRQ_GPT, regs);
- return;
- }
-
- /* check for i8259 interrupts */
- if (mask & (1 << VRC5476_I8259_CASCADE)) {
- int i8259_irq = nile4_i8259_iack();
- do_IRQ(I8259_IRQ_BASE + i8259_irq, regs);
- return;
- }
-
- /* regular nile4 interrupts (we should not really have any */
- for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1) {
- if (mask & 1) {
- do_IRQ(VRC5476_IRQ_BASE + nile4_irq, regs);
- return;
- }
- }
- spurious_interrupt(regs);
-}
# CONFIG_MIPS_XXS1500 is not set
# CONFIG_PNX8550_V2PCI is not set
# CONFIG_PNX8550_JBS is not set
-# CONFIG_DDB5476 is not set
# CONFIG_DDB5477 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
#
# These are still pretty much in the old state, watch, go blind.
#
-obj-$(CONFIG_DDB5476) += ops-ddb5476.o pci-ddb5476.o
obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * arch/mips/ddb5xxx/ddb5476/pci_ops.c
- * Define the pci_ops for DB5477.
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-/*
- * config_swap structure records what set of pdar/pmr are used
- * to access pci config space. It also provides a place hold the
- * original values for future restoring.
- */
-struct pci_config_swap {
- u32 pdar;
- u32 pmr;
- u32 config_base;
- u32 config_size;
- u32 pdar_backup;
- u32 pmr_backup;
-};
-
-/*
- * On DDB5476, we have one set of swap registers
- */
-struct pci_config_swap ext_pci_swap = {
- DDB_PCIW0,
- DDB_PCIINIT0,
- DDB_PCI_CONFIG_BASE,
- DDB_PCI_CONFIG_SIZE
-};
-
-static int pci_config_workaround = 1;
-
-/*
- * access config space
- */
-static inline u32 ddb_access_config_base(struct pci_config_swap *swap, u32 bus, /* 0 means top level bus */
- u32 slot_num)
-{
- u32 pci_addr = 0;
- u32 pciinit_offset = 0;
- u32 virt_addr = swap->config_base;
- u32 option;
-
- if (pci_config_workaround) {
- /* [jsun] work around Vrc5476 controller itself, returnning
- * slot 0 essentially makes vrc5476 invisible
- */
- if (slot_num == 12)
- slot_num = 0;
-
-#if 0
- /* BUG : skip P2P bridge for now */
- if (slot_num == 5)
- slot_num = 0;
-#endif
-
- } else {
- /* now we have to be hornest, returning the true
- * PCI config headers for vrc5476
- */
- if (slot_num == 12) {
- swap->pdar_backup = ddb_in32(swap->pdar);
- swap->pmr_backup = ddb_in32(swap->pmr);
- return DDB_BASE + DDB_PCI_BASE;
- }
- }
-
- /* minimum pdar (window) size is 2MB */
- db_assert(swap->config_size >= (2 << 20));
-
- db_assert(slot_num < (1 << 5));
- db_assert(bus < (1 << 8));
-
- /* backup registers */
- swap->pdar_backup = ddb_in32(swap->pdar);
- swap->pmr_backup = ddb_in32(swap->pmr);
-
- /* set the pdar (pci window) register */
- ddb_set_pdar(swap->pdar, swap->config_base, swap->config_size, 32, /* 32 bit wide */
- 0, /* not on local memory bus */
- 0); /* not visible from PCI bus (N/A) */
-
- /*
- * calcuate the absolute pci config addr;
- * according to the spec, we start scanning from adr:11 (0x800)
- */
- if (bus == 0) {
- /* type 0 config */
- pci_addr = 0x800 << slot_num;
- } else {
- /* type 1 config */
- pci_addr = (bus << 16) | (slot_num << 11);
- /* panic("ddb_access_config_base: we don't support type 1 config Yet"); */
- }
-
- /*
- * if pci_addr is less than pci config window size, we set
- * pciinit_offset to 0 and adjust the virt_address.
- * Otherwise we will try to adjust pciinit_offset.
- */
- if (pci_addr < swap->config_size) {
- virt_addr = KSEG1ADDR(swap->config_base + pci_addr);
- pciinit_offset = 0;
- } else {
- db_assert((pci_addr & (swap->config_size - 1)) == 0);
- virt_addr = KSEG1ADDR(swap->config_base);
- pciinit_offset = pci_addr;
- }
-
- /* set the pmr register */
- option = DDB_PCI_ACCESS_32;
- if (bus != 0)
- option |= DDB_PCI_CFGTYPE1;
- ddb_set_pmr(swap->pmr, DDB_PCICMD_CFG, pciinit_offset, option);
-
- return virt_addr;
-}
-
-static inline void ddb_close_config_base(struct pci_config_swap *swap)
-{
- ddb_out32(swap->pdar, swap->pdar_backup);
- ddb_out32(swap->pmr, swap->pmr_backup);
-}
-
-static int read_config_dword(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u32 * val)
-{
- u32 bus, slot_num, func_num;
- u32 base;
-
- db_assert((where & 3) == 0);
- db_assert(where < (1 << 8));
-
- /* check if the bus is top-level */
- if (dev->bus->parent != NULL) {
- bus = dev->bus->number;
- db_assert(bus != 0);
- } else {
- bus = 0;
- }
-
- slot_num = PCI_SLOT(dev->devfn);
- func_num = PCI_FUNC(dev->devfn);
- base = ddb_access_config_base(swap, bus, slot_num);
- *val = *(volatile u32 *) (base + (func_num << 8) + where);
- ddb_close_config_base(swap);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int read_config_word(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u16 * val)
-{
- int status;
- u32 result;
-
- db_assert((where & 1) == 0);
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (where & 2)
- result >>= 16;
- *val = result & 0xffff;
- return status;
-}
-
-static int read_config_byte(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u8 * val)
-{
- int status;
- u32 result;
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (where & 1)
- result >>= 8;
- if (where & 2)
- result >>= 16;
- *val = result & 0xff;
- return status;
-}
-
-static int write_config_dword(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u32 val)
-{
- u32 bus, slot_num, func_num;
- u32 base;
-
- db_assert((where & 3) == 0);
- db_assert(where < (1 << 8));
-
- /* check if the bus is top-level */
- if (dev->bus->parent != NULL) {
- bus = dev->bus->number;
- db_assert(bus != 0);
- } else {
- bus = 0;
- }
-
- slot_num = PCI_SLOT(dev->devfn);
- func_num = PCI_FUNC(dev->devfn);
- base = ddb_access_config_base(swap, bus, slot_num);
- *(volatile u32 *) (base + (func_num << 8) + where) = val;
- ddb_close_config_base(swap);
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u16 val)
-{
- int status, shift = 0;
- u32 result;
-
- db_assert((where & 1) == 0);
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (status != PCIBIOS_SUCCESSFUL)
- return status;
-
- if (where & 2)
- shift += 16;
- result &= ~(0xffff << shift);
- result |= val << shift;
- return write_config_dword(swap, dev, where & ~3, result);
-}
-
-static int write_config_byte(struct pci_config_swap *swap,
- struct pci_dev *dev, u32 where, u8 val)
-{
- int status, shift = 0;
- u32 result;
-
- status = read_config_dword(swap, dev, where & ~3, &result);
- if (status != PCIBIOS_SUCCESSFUL)
- return status;
-
- if (where & 2)
- shift += 16;
- if (where & 1)
- shift += 8;
- result &= ~(0xff << shift);
- result |= val << shift;
- return write_config_dword(swap, dev, where & ~3, result);
-}
-
-#define MAKE_PCI_OPS(prefix, rw, unitname, unittype, pciswap) \
-static int prefix##_##rw##_config_##unitname(struct pci_dev *dev, int where, unittype val) \
-{ \
- return rw##_config_##unitname(pciswap, \
- dev, \
- where, \
- val); \
-}
-
-MAKE_PCI_OPS(extpci, read, byte, u8 *, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, read, word, u16 *, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, read, dword, u32 *, &ext_pci_swap)
-
- MAKE_PCI_OPS(extpci, write, byte, u8, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, write, word, u16, &ext_pci_swap)
- MAKE_PCI_OPS(extpci, write, dword, u32, &ext_pci_swap)
-
-struct pci_ops ddb5476_ext_pci_ops = {
- extpci_read_config_byte,
- extpci_read_config_word,
- extpci_read_config_dword,
- extpci_write_config_byte,
- extpci_write_config_word,
- extpci_write_config_dword
-};
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/debug.h>
-
-#include <asm/ddb5xxx/ddb5xxx.h>
-
-static struct resource extpci_io_resource = {
- .start = 0x1000, /* leave some room for ISA bus */
- .end = DDB_PCI_IO_SIZE - 1,
- .name = "pci IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource extpci_mem_resource = {
- .start = DDB_PCI_MEM_BASE + 0x00100000, /* leave 1 MB for RTC */
- .end = DDB_PCI_MEM_BASE + DDB_PCI_MEM_SIZE - 1,
- .name = "pci memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops ddb5476_ext_pci_ops;
-
-struct pci_controller ddb5476_controller = {
- .pci_ops = &ddb5476_ext_pci_ops,
- .io_resource = &extpci_io_resource,
- .mem_resource = &extpci_mem_resource
-};
-
-
-/*
- * we fix up irqs based on the slot number.
- * The first entry is at AD:11.
- *
- * This does not work for devices on sub-buses yet.
- */
-
-/*
- * temporary
- */
-
-#define PCI_EXT_INTA 8
-#define PCI_EXT_INTB 9
-#define PCI_EXT_INTC 10
-#define PCI_EXT_INTD 11
-#define PCI_EXT_INTE 12
-
-/*
- * based on ddb5477 manual page 11
- */
-#define MAX_SLOT_NUM 21
-static unsigned char irq_map[MAX_SLOT_NUM] = {
- [ 2] = 9, /* AD:13 USB */
- [ 3] = 10, /* AD:14 PMU */
- [ 5] = 0, /* AD:16 P2P bridge */
- [ 6] = nile4_to_irq(PCI_EXT_INTB), /* AD:17 */
- [ 7] = nile4_to_irq(PCI_EXT_INTC), /* AD:18 */
- [ 8] = nile4_to_irq(PCI_EXT_INTD), /* AD:19 */
- [ 9] = nile4_to_irq(PCI_EXT_INTA), /* AD:20 */
- [13] = 14, /* AD:24 HD controller, M5229 */
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_map[slot];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
-
-void __init ddb_pci_reset_bus(void)
-{
- u32 temp;
-
- /*
- * I am not sure about the "official" procedure, the following
- * steps work as far as I know:
- * We first set PCI cold reset bit (bit 31) in PCICTRL-H.
- * Then we clear the PCI warm reset bit (bit 30) to 0 in PCICTRL-H.
- * The same is true for both PCI channels.
- */
- temp = ddb_in32(DDB_PCICTRL + 4);
- temp |= 0x80000000;
- ddb_out32(DDB_PCICTRL + 4, temp);
- temp &= ~0xc0000000;
- ddb_out32(DDB_PCICTRL + 4, temp);
-
-}
sa_offset = 2; /* Grrr, damn Matrox boards. */
multiport_cnt = 4;
}
-#ifdef CONFIG_DDB5476
- if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 6)) {
- /* DDB5476 MAC address in first EEPROM locations. */
- sa_offset = 0;
- /* No media table either */
- tp->flags &= ~HAS_MEDIA_TABLE;
- }
-#endif
#ifdef CONFIG_DDB5477
if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 4)) {
/* DDB5477 MAC address in first EEPROM locations. */
+++ /dev/null
-/*
- * header file specific for ddb5476
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-/*
- * Memory map (physical address)
- *
- * Note most of the following address must be properly aligned by the
- * corresponding size. For example, if PCI_IO_SIZE is 16MB, then
- * PCI_IO_BASE must be aligned along 16MB boundary.
- */
-#define DDB_SDRAM_BASE 0x00000000
-#define DDB_SDRAM_SIZE 0x04000000 /* 64MB */
-
-#define DDB_DCS3_BASE 0x04000000 /* flash 1 */
-#define DDB_DCS3_SIZE 0x01000000 /* 16MB */
-
-#define DDB_DCS2_BASE 0x05000000 /* flash 2 */
-#define DDB_DCS2_SIZE 0x01000000 /* 16MB */
-
-#define DDB_PCI_IO_BASE 0x06000000
-#define DDB_PCI_IO_SIZE 0x02000000 /* 32 MB */
-
-#define DDB_PCI_MEM_BASE 0x08000000
-#define DDB_PCI_MEM_SIZE 0x08000000 /* 128 MB */
-
-#define DDB_DCS5_BASE 0x13000000 /* DDB status regs */
-#define DDB_DCS5_SIZE 0x00200000 /* 2MB, 8-bit */
-
-#define DDB_DCS4_BASE 0x14000000 /* DDB control regs */
-#define DDB_DCS4_SIZE 0x00200000 /* 2MB, 8-bit */
-
-#define DDB_INTCS_BASE 0x1fa00000 /* VRC5476 control regs */
-#define DDB_INTCS_SIZE 0x00200000 /* 2MB */
-
-#define DDB_BOOTCS_BASE 0x1fc00000 /* Boot ROM / EPROM /Flash */
-#define DDB_BOOTCS_SIZE 0x00200000 /* 2 MB - doc says 4MB */
-
-
-/* aliases */
-#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE
-#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE
-
-/* PCI intr ack share PCIW0 with PCI IO */
-#define DDB_PCI_IACK_BASE DDB_PCI_IO_BASE
-
-/*
- * Interrupt mapping
- *
- * We have three interrupt controllers:
- *
- * . CPU itself - 8 sources
- * . i8259 - 16 sources
- * . vrc5476 - 16 sources
- *
- * They connected as follows:
- * all vrc5476 interrupts are routed to cpu IP2 (by software setting)
- * all i2869 are routed to INTC in vrc5476 (by hardware connection)
- *
- * All VRC5476 PCI interrupts are level-triggered (no ack needed).
- * All PCI irq but INTC are active low.
- */
-
-/*
- * irq number block assignment
- */
-
-#define NUM_CPU_IRQ 8
-#define NUM_I8259_IRQ 16
-#define NUM_VRC5476_IRQ 16
-
-#define DDB_IRQ_BASE 0
-
-#define I8259_IRQ_BASE DDB_IRQ_BASE
-#define VRC5476_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ)
-#define CPU_IRQ_BASE (VRC5476_IRQ_BASE + NUM_VRC5476_IRQ)
-
-/*
- * vrc5476 irq defs, see page 52-64 of Vrc5074 system controller manual
- */
-
-#define VRC5476_IRQ_CPCE 0 /* cpu parity error */
-#define VRC5476_IRQ_CNTD 1 /* cpu no target */
-#define VRC5476_IRQ_MCE 2 /* memory check error */
-#define VRC5476_IRQ_DMA 3 /* DMA */
-#define VRC5476_IRQ_UART 4 /* vrc5476 builtin UART, not used */
-#define VRC5476_IRQ_WDOG 5 /* watchdog timer */
-#define VRC5476_IRQ_GPT 6 /* general purpose timer */
-#define VRC5476_IRQ_LBRT 7 /* local bus read timeout */
-#define VRC5476_IRQ_INTA 8 /* PCI INT #A */
-#define VRC5476_IRQ_INTB 9 /* PCI INT #B */
-#define VRC5476_IRQ_INTC 10 /* PCI INT #C */
-#define VRC5476_IRQ_INTD 11 /* PCI INT #D */
-#define VRC5476_IRQ_INTE 12 /* PCI INT #E */
-#define VRC5476_IRQ_RESERVED_13 13 /* reserved */
-#define VRC5476_IRQ_PCIS 14 /* PCI SERR # */
-#define VRC5476_IRQ_PCI 15 /* PCI internal error */
-
-/*
- * i2859 irq assignment
- */
-#define I8259_IRQ_RESERVED_0 0
-#define I8259_IRQ_KEYBOARD 1 /* M1543 default */
-#define I8259_IRQ_CASCADE 2
-#define I8259_IRQ_UART_B 3 /* M1543 default, may conflict with RTC according to schematic diagram */
-#define I8259_IRQ_UART_A 4 /* M1543 default */
-#define I8259_IRQ_PARALLEL 5 /* M1543 default */
-#define I8259_IRQ_RESERVED_6 6
-#define I8259_IRQ_RESERVED_7 7
-#define I8259_IRQ_RTC 8 /* who set this? */
-#define I8259_IRQ_USB 9 /* ddb_setup */
-#define I8259_IRQ_PMU 10 /* ddb_setup */
-#define I8259_IRQ_RESERVED_11 11
-#define I8259_IRQ_RESERVED_12 12 /* m1543_irq_setup */
-#define I8259_IRQ_RESERVED_13 13
-#define I8259_IRQ_HDC1 14 /* default and ddb_setup */
-#define I8259_IRQ_HDC2 15 /* default */
-
-
-/*
- * misc
- */
-#define VRC5476_I8259_CASCADE VRC5476_IRQ_INTC
-#define CPU_VRC5476_CASCADE 2
-
-#define is_i8259_irq(irq) ((irq) < NUM_I8259_IRQ)
-#define nile4_to_irq(n) ((n)+NUM_I8259_IRQ)
-#define irq_to_nile4(n) ((n)-NUM_I8259_IRQ)
-
-/*
- * low-level irq functions
- */
-#ifndef __ASSEMBLY__
-extern void nile4_map_irq(int nile4_irq, int cpu_irq);
-extern void nile4_map_irq_all(int cpu_irq);
-extern void nile4_enable_irq(int nile4_irq);
-extern void nile4_disable_irq(int nile4_irq);
-extern void nile4_disable_irq_all(void);
-extern u16 nile4_get_irq_stat(int cpu_irq);
-extern void nile4_enable_irq_output(int cpu_irq);
-extern void nile4_disable_irq_output(int cpu_irq);
-extern void nile4_set_pci_irq_polarity(int pci_irq, int high);
-extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level);
-extern void nile4_clear_irq(int nile4_irq);
-extern void nile4_clear_irq_mask(u32 mask);
-extern u8 nile4_i8259_iack(void);
-extern void nile4_dump_irq_status(void); /* Debug */
-#endif /* !__ASSEMBLY__ */
/*
* include the board dependent part
*/
-#if defined(CONFIG_DDB5476)
-#include <asm/ddb5xxx/ddb5476.h>
-#elif defined(CONFIG_DDB5477)
+#if defined(CONFIG_DDB5477)
#include <asm/ddb5xxx/ddb5477.h>
#else
#error "Unknown DDB board!"
projects / linux-2.6-microblaze.git / commitdiff