regulator: Convert UniPhier regulator to json-schema

Convert the UniPhier regulator binding to DT schema format.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1624413137-17453-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
new file mode 100644 (file)
index 0000000..861d5f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/socionext,uniphier-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier regulator controller
+
+description: |
+  This regulator controls VBUS and belongs to USB3 glue layer. Before using
+  the regulator, it is necessary to control the clocks and resets to enable
+  this layer. These clocks and resets should be described in each property.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+# USB3 Controller
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pro4-usb3-regulator
+      - socionext,uniphier-pro5-usb3-regulator
+      - socionext,uniphier-pxs2-usb3-regulator
+      - socionext,uniphier-ld20-usb3-regulator
+      - socionext,uniphier-pxs3-usb3-regulator
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:          # for others
+          - const: link
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    oneOf:
+      - items:          # for Pro4, Pro5
+          - const: gio
+          - const: link
+      - items:
+          - const: link
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    usb-glue@65b00000 {
+        compatible = "simple-mfd";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x65b00000 0x400>;
+
+        usb_vbus0: regulators@100 {
+            compatible = "socionext,uniphier-ld20-usb3-regulator";
+            reg = <0x100 0x10>;
+            clock-names = "link";
+            clocks = <&sys_clk 14>;
+            reset-names = "link";
+            resets = <&sys_rst 14>;
+        };
+    };
+

diff --git a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt b/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
deleted file mode 100644 (file)
index 94fd38b..0000000
--- a/Documentation/devicetree/bindings/regulator/uniphier-regulator.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Socionext UniPhier Regulator Controller
-
-This describes the devicetree bindings for regulator controller implemented
-on Socionext UniPhier SoCs.
-
-USB3 Controller
----------------
-
-This regulator controls VBUS and belongs to USB3 glue layer. Before using
-the regulator, it is necessary to control the clocks and resets to enable
-this layer. These clocks and resets should be described in each property.
-
-Required properties:
-- compatible: Should be
-    "socionext,uniphier-pro4-usb3-regulator" - for Pro4 SoC
-    "socionext,uniphier-pro5-usb3-regulator" - for Pro5 SoC
-    "socionext,uniphier-pxs2-usb3-regulator" - for PXs2 SoC
-    "socionext,uniphier-ld20-usb3-regulator" - for LD20 SoC
-    "socionext,uniphier-pxs3-usb3-regulator" - for PXs3 SoC
-- reg: Specifies offset and length of the register set for the device.
-- clocks: A list of phandles to the clock gate for USB3 glue layer.
-       According to the clock-names, appropriate clocks are required.
-- clock-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-- resets: A list of phandles to the reset control for USB3 glue layer.
-       According to the reset-names, appropriate resets are required.
-- reset-names: Should contain
-    "gio", "link" - for Pro4 and Pro5 SoCs
-    "link"        - for others
-
-See Documentation/devicetree/bindings/regulator/regulator.txt
-for more details about the regulator properties.
-
-Example:
-
-       usb-glue@65b00000 {
-               compatible = "socionext,uniphier-ld20-dwc3-glue",
-                            "simple-mfd";
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges = <0 0x65b00000 0x400>;
-
-               usb_vbus0: regulators@100 {
-                       compatible = "socionext,uniphier-ld20-usb3-regulator";
-                       reg = <0x100 0x10>;
-                       clock-names = "link";
-                       clocks = <&sys_clk 14>;
-                       reset-names = "link";
-                       resets = <&sys_rst 14>;
-               };
-
-               phy {
-                       ...
-                       phy-supply = <&usb_vbus0>;
-               };
-               ...
-       };