spi: imx: fix runtime pm support for !CONFIG_PM
authorSascha Hauer <s.hauer@pengutronix.de>
Wed, 21 Oct 2020 10:45:13 +0000 (12:45 +0200)
committerMark Brown <broonie@kernel.org>
Fri, 23 Oct 2020 17:29:00 +0000 (18:29 +0100)
525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With
this pm_runtime is used to bring up the clocks initially. When CONFIG_PM
is disabled the clocks are no longer enabled and the driver doesn't work
anymore. Fix this by enabling the clocks in the probe function and
telling pm_runtime that the device is active using
pm_runtime_set_active().

Fixes: 525c9e5a32bd spi: imx: enable runtime pm support
Tested-by: Christian Eggers <ceggers@arri.de> [tested for !CONFIG_PM only]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20201021104513.21560-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/spi-imx.c

index 5158c48..95be1b2 100644 (file)
@@ -1676,15 +1676,18 @@ static int spi_imx_probe(struct platform_device *pdev)
                goto out_master_put;
        }
 
-       pm_runtime_enable(spi_imx->dev);
+       ret = clk_prepare_enable(spi_imx->clk_per);
+       if (ret)
+               goto out_master_put;
+
+       ret = clk_prepare_enable(spi_imx->clk_ipg);
+       if (ret)
+               goto out_put_per;
+
        pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
        pm_runtime_use_autosuspend(spi_imx->dev);
-
-       ret = pm_runtime_get_sync(spi_imx->dev);
-       if (ret < 0) {
-               dev_err(spi_imx->dev, "failed to enable clock\n");
-               goto out_runtime_pm_put;
-       }
+       pm_runtime_set_active(spi_imx->dev);
+       pm_runtime_enable(spi_imx->dev);
 
        spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per);
        /*
@@ -1719,8 +1722,12 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 out_runtime_pm_put:
        pm_runtime_dont_use_autosuspend(spi_imx->dev);
-       pm_runtime_put_sync(spi_imx->dev);
+       pm_runtime_set_suspended(&pdev->dev);
        pm_runtime_disable(spi_imx->dev);
+
+       clk_disable_unprepare(spi_imx->clk_ipg);
+out_put_per:
+       clk_disable_unprepare(spi_imx->clk_per);
 out_master_put:
        spi_master_put(master);