net/mlx5: Fix a race when moving command interface to polling mode

As part of driver unload, it destroys the commands EQ (via FW command).
As the commands EQ is destroyed, FW will not generate EQEs for any command
that driver sends afterwards. Driver should poll for later commands status.

Driver commands mode metadata is updated before the commands EQ is
actually destroyed. This can lead for double completion handle by the
driver (polling and interrupt), if a command is executed and completed by
FW after the mode was changed, but before the EQ was destroyed.

Fix that by using the mlx5_cmd_allowed_opcode mechanism to guarantee
that only DESTROY_EQ command can be executed during this time period.

Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eq.c b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
index 31ef9f8..1318d77 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/eq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eq.c
@@ -656,8 +656,10 @@ static void destroy_async_eqs(struct mlx5_core_dev *dev)
 
        cleanup_async_eq(dev, &table->pages_eq, "pages");
        cleanup_async_eq(dev, &table->async_eq, "async");
+       mlx5_cmd_allowed_opcode(dev, MLX5_CMD_OP_DESTROY_EQ);
        mlx5_cmd_use_polling(dev);
        cleanup_async_eq(dev, &table->cmd_eq, "cmd");
+       mlx5_cmd_allowed_opcode(dev, CMD_ALLOWED_OPCODE_ALL);
        mlx5_eq_notifier_unregister(dev, &table->cq_err_nb);
 }