rtc: ds1307: comment and format cleanup

Do some cleanup of the comment sections as well as correct some
formatting issues reported by checkpatch.pl.

Signed-off-by: David Anders <x0132446@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Austin Boyle <Austin.Boyle@aviatnet.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index d4543e8..84ab971 100644 (file)
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -20,7 +20,8 @@
 
 
 
-/* We can't determine type by probing, but if we expect pre-Linux code
+/*
+ * We can't determine type by probing, but if we expect pre-Linux code
  * to have set the chip up as a clock (turning on the oscillator and
  * setting the date and time), Linux can ignore the non-clock features.
  * That's a natural job for a factory or repair bench.
@@ -37,7 +38,7 @@ enum ds_type {
        mcp7941x,
        rx_8025,
        last_ds_type /* always last */
-       // rs5c372 too?  different address...
+       /* rs5c372 too?  different address... */
 };
 
 
@@ -59,7 +60,8 @@ enum ds_type {
 #      define DS1337_BIT_CENTURY       0x80    /* in REG_MONTH */
 #define DS1307_REG_YEAR                0x06    /* 00-99 */
 
-/* Other registers (control, status, alarms, trickle charge, NVRAM, etc)
+/*
+ * Other registers (control, status, alarms, trickle charge, NVRAM, etc)
  * start at 7, and they differ a LOT. Only control and status matter for
  * basic RTC date and time functionality; be careful using them.
  */
@@ -366,6 +368,11 @@ static int ds1307_set_time(struct device *dev, struct rtc_time *t)
                                | DS1340_BIT_CENTURY;
                break;
        case mcp7941x:
+               /*
+                * these bits were cleared when preparing the date/time
+                * values and need to be set again before writing the
+                * buffer out to the device.
+                */
                buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
                buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
                break;
@@ -411,7 +418,8 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
                        ds1307->regs[6], ds1307->regs[7],
                        ds1307->regs[8]);
 
-       /* report alarm time (ALARM1); assume 24 hour and day-of-month modes,
+       /*
+        * report alarm time (ALARM1); assume 24 hour and day-of-month modes,
         * and that all four fields are checked matches
         */
        t->time.tm_sec = bcd2bin(ds1307->regs[0] & 0x7f);
@@ -439,7 +447,7 @@ static int ds1337_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 
 static int ds1337_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
-       struct i2c_client       *client = to_i2c_client(dev);
+       struct i2c_client       *client = to_i2c_client(dev);
        struct ds1307           *ds1307 = i2c_get_clientdata(client);
        unsigned char           *buf = ds1307->regs;
        u8                      control, status;
@@ -602,8 +610,6 @@ static struct bin_attribute nvram = {
 
 /*----------------------------------------------------------------------*/
 
-static struct i2c_driver ds1307_driver;
-
 static int __devinit ds1307_probe(struct i2c_client *client,
                                  const struct i2c_device_id *id)
 {
@@ -624,7 +630,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
            && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
                return -EIO;
 
-       if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL)))
+       ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL);
+       if (!ds1307)
                return -ENOMEM;
 
        i2c_set_clientdata(client, ds1307);
@@ -659,7 +666,8 @@ static int __devinit ds1307_probe(struct i2c_client *client,
                if (ds1307->regs[0] & DS1337_BIT_nEOSC)
                        ds1307->regs[0] &= ~DS1337_BIT_nEOSC;
 
-               /* Using IRQ?  Disable the square wave and both alarms.
+               /*
+                * Using IRQ?  Disable the square wave and both alarms.
                 * For some variants, be sure alarms can trigger when we're
                 * running on Vbackup (BBSQI/BBSQW)
                 */
@@ -765,7 +773,8 @@ read_rtc:
                goto exit_free;
        }
 
-       /* minimal sanity checking; some chips (like DS1340) don't
+       /*
+        * minimal sanity checking; some chips (like DS1340) don't
         * specify the extra bits as must-be-zero, but there are
         * still a few values that are clearly out-of-range.
         */
@@ -837,7 +846,8 @@ read_rtc:
        switch (ds1307->type) {
        case ds_1340:
        case m41t00:
-               /* NOTE: ignores century bits; fix before deploying
+               /*
+                * NOTE: ignores century bits; fix before deploying
                 * systems that will run through year 2100.
                 */
                break;
@@ -847,7 +857,8 @@ read_rtc:
                if (!(tmp & DS1307_BIT_12HR))
                        break;
 
-               /* Be sure we're in 24 hour mode.  Multi-master systems
+               /*
+                * Be sure we're in 24 hour mode.  Multi-master systems
                 * take note...
                 */
                tmp = bcd2bin(tmp & 0x1f);
@@ -902,7 +913,7 @@ exit_free:
 
 static int __devexit ds1307_remove(struct i2c_client *client)
 {
-       struct ds1307           *ds1307 = i2c_get_clientdata(client);
+       struct ds1307 *ds1307 = i2c_get_clientdata(client);
 
        if (test_and_clear_bit(HAS_ALARM, &ds1307->flags)) {
                free_irq(client->irq, client);