indirection_rqt[i] = i % num_channels;
}
- static int mlx5e_get_pci_bw(struct mlx5_core_dev *mdev, u32 *pci_bw)
- {
- enum pcie_link_width width;
- enum pci_bus_speed speed;
- int err = 0;
-
- err = pcie_get_minimum_link(mdev->pdev, &speed, &width);
- if (err)
- return err;
-
- if (speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN)
- return -EINVAL;
-
- switch (speed) {
- case PCIE_SPEED_2_5GT:
- *pci_bw = 2500 * width;
- break;
- case PCIE_SPEED_5_0GT:
- *pci_bw = 5000 * width;
- break;
- case PCIE_SPEED_8_0GT:
- *pci_bw = 8000 * width;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
- }
-
-static bool cqe_compress_heuristic(u32 link_speed, u32 pci_bw)
+static bool slow_pci_heuristic(struct mlx5_core_dev *mdev)
{
- return (link_speed && pci_bw &&
- (pci_bw < 40000) && (pci_bw < link_speed));
-}
+ u32 link_speed = 0;
+ u32 pci_bw = 0;
-static bool hw_lro_heuristic(u32 link_speed, u32 pci_bw)
-{
- return !(link_speed && pci_bw &&
- (pci_bw <= 16000) && (pci_bw < link_speed));
+ mlx5e_get_max_linkspeed(mdev, &link_speed);
- mlx5e_get_pci_bw(mdev, &pci_bw);
++ pci_bw = pcie_bandwidth_available(mdev->pdev, NULL, NULL, NULL);
+ mlx5_core_dbg_once(mdev, "Max link speed = %d, PCI BW = %d\n",
+ link_speed, pci_bw);
+
+#define MLX5E_SLOW_PCI_RATIO (2)
+
+ return link_speed && pci_bw &&
+ link_speed > MLX5E_SLOW_PCI_RATIO * pci_bw;
}
void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode)
return -ENOENT;
}
EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword);
- pci_set_vpd_size(dev, 8192);
+
+ #ifdef CONFIG_PCI_QUIRKS
+ /*
+ * Quirk non-zero PCI functions to route VPD access through function 0 for
+ * devices that share VPD resources between functions. The functions are
+ * expected to be identical devices.
+ */
+ static void quirk_f0_vpd_link(struct pci_dev *dev)
+ {
+ struct pci_dev *f0;
+
+ if (!PCI_FUNC(dev->devfn))
+ return;
+
+ f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ if (!f0)
+ return;
+
+ if (f0->vpd && dev->class == f0->class &&
+ dev->vendor == f0->vendor && dev->device == f0->device)
+ dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
+
+ pci_dev_put(f0);
+ }
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link);
+
+ /*
+ * If a device follows the VPD format spec, the PCI core will not read or
+ * write past the VPD End Tag. But some vendors do not follow the VPD
+ * format spec, so we can't tell how much data is safe to access. Devices
+ * may behave unpredictably if we access too much. Blacklist these devices
+ * so we don't touch VPD at all.
+ */
+ static void quirk_blacklist_vpd(struct pci_dev *dev)
+ {
+ if (dev->vpd) {
+ dev->vpd->len = 0;
+ pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
+ }
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
+ quirk_blacklist_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
+
+ /*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device. This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
+ * will dump 32k of data. Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang. Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+ static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+ {
+ /*
+ * Only disable the VPD capability for 5706, 5706S, 5708,
+ * 5708S and 5709 rev. A
+ */
+ if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
+ ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+ (dev->revision & 0xf0) == 0x0)) {
+ if (dev->vpd)
+ dev->vpd->len = 0x80;
+ }
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
+
+ static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
+ {
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd);
++ int chip = (dev->device & 0xf000) >> 12;
++ int func = (dev->device & 0x0f00) >> 8;
++ int prod = (dev->device & 0x00ff) >> 0;
++
++ /*
++ * If this is a T3-based adapter, there's a 1KB VPD area at offset
++ * 0xc00 which contains the preferred VPD values. If this is a T4 or
++ * later based adapter, the special VPD is at offset 0x400 for the
++ * Physical Functions (the SR-IOV Virtual Functions have no VPD
++ * Capabilities). The PCI VPD Access core routines will normally
++ * compute the size of the VPD by parsing the VPD Data Structure at
++ * offset 0x000. This will result in silent failures when attempting
++ * to accesses these other VPD areas which are beyond those computed
++ * limits.
++ */
++ if (chip == 0x0 && prod >= 0x20)
++ pci_set_vpd_size(dev, 8192);
++ else if (chip >= 0x4 && func < 0x8)
++ pci_set_vpd_size(dev, 2048);
+ }
++
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
++ quirk_chelsio_extend_vpd);
++
+ #endif
projects / linux-2.6-microblaze.git / commitdiff