// *** IMPORTANT ***
// PMFW TEAM: Always increment the interface version on any change to this file
-#define SMU13_DRIVER_IF_VERSION 0x2A
+#define SMU13_DRIVER_IF_VERSION 0x2C
//Increment this version if SkuTable_t or BoardTable_t change
-#define PPTABLE_VERSION 0x1E
+#define PPTABLE_VERSION 0x20
#define NUM_GFXCLK_DPM_LEVELS 16
#define NUM_SOCCLK_DPM_LEVELS 8
#define DEBUG_OVERRIDE_DISABLE_DFLL 0x00000200
#define DEBUG_OVERRIDE_ENABLE_RLC_VF_BRINGUP_MODE 0x00000400
#define DEBUG_OVERRIDE_DFLL_MASTER_MODE 0x00000800
+#define DEBUG_OVERRIDE_ENABLE_PROFILING_MODE 0x00001000
// VR Mapping Bit Defines
#define VR_MAPPING_VR_SELECT_MASK 0x01
uint16_t Vmin_Hot_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at hot.
uint16_t Vmin_Cold_Eol[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) End-of-life Vset to be used at cold.
uint16_t Vmin_Aging_Offset[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Worst-case aging margin
- uint16_t Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot
- uint16_t Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold
+ uint16_t Spare_Vmin_Plat_Offset_Hot[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Hot
+ uint16_t Spare_Vmin_Plat_Offset_Cold[PMFW_VOLT_PLANE_COUNT]; //In mV(Q2) Platform offset apply to T0 Cold
//This is a fixed/minimum VMIN aging degradation offset which is applied at T0. This reflects the minimum amount of aging already accounted for.
uint16_t VcBtcFixedVminAgingOffset[PMFW_VOLT_PLANE_COUNT];
uint16_t GfxclkFreqGfxUlv; // in MHz
uint8_t GfxIdlePadding2[2];
-
- uint32_t GfxoffSpare[16];
+ uint32_t GfxOffEntryHysteresis; //For RLC to count after it enters CGCG, and before triggers GFXOFF entry
+ uint32_t GfxoffSpare[15];
// GFX GPO
- uint32_t GfxGpoSpare[16];
+ float DfllBtcMasterScalerM;
+ int32_t DfllBtcMasterScalerB;
+ float DfllBtcSlaveScalerM;
+ int32_t DfllBtcSlaveScalerB;
+ uint32_t GfxGpoSpare[12];
// GFX DCS
uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued
uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS
+ uint8_t FuseWritePowerMuxPresent;
+ uint8_t FuseWritePadding[3];
+
// SECTION: Board Reserved
- uint32_t BoardSpare[64];
+ uint32_t BoardSpare[63];
// SECTION: Structure Padding