arm64: dts: qcom: pms405: Rename adc outputs as per schematics

The adc outputs shouldn't contain information about their configuration
e.g. 100K pull-up, but just reflect the name of the signal in the
schematics.

Making them labels also allows us to overwrite their configuration in
board-specific DTs.

Sort them by order as used in adc5_chans_rev2, while we're at it.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index a3d5db0..14240fe 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -98,7 +98,7 @@
                                qcom,pre-scaling = <1 1>;
                        };
 
-                       vph_pwr {
+                       pon_1: vph_pwr {
                                reg = <ADC5_VPH_PWR>;
                                qcom,pre-scaling = <1 3>;
                        };
@@ -108,22 +108,22 @@
                                qcom,pre-scaling = <1 1>;
                        };
 
-                       xo_therm_100k_pu {
-                               reg = <ADC5_XO_THERM_100K_PU>;
+                       pa_therm1: thermistor1 {
+                               reg = <ADC5_AMUX_THM1_100K_PU>;
                                qcom,ratiometric;
                                qcom,hw-settle-time = <200>;
                                qcom,pre-scaling = <1 1>;
                        };
 
-                       amux_thm1_100k_pu {
-                               reg = <ADC5_AMUX_THM1_100K_PU>;
+                       pa_therm3: thermistor3 {
+                               reg = <ADC5_AMUX_THM3_100K_PU>;
                                qcom,ratiometric;
                                qcom,hw-settle-time = <200>;
                                qcom,pre-scaling = <1 1>;
                        };
 
-                       amux_thm3_100k_pu {
-                               reg = <ADC5_AMUX_THM3_100K_PU>;
+                       xo_therm: xo_temp {
+                               reg = <ADC5_XO_THERM_100K_PU>;
                                qcom,ratiometric;
                                qcom,hw-settle-time = <200>;
                                qcom,pre-scaling = <1 1>;