regulator: tps65090: Pass descriptor instead of GPIO number

Instead of passing a global GPIO number for the enable GPIO, pass
a descriptor looked up from the device tree node for the
regulator.

This regulator supports passing platform data, but enable/sleep
regulators are looked up from the device tree exclusively, so
we can need not touch other files.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index 395f35d..2d398fa 100644 (file)
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -19,8 +19,8 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -300,26 +300,6 @@ static int tps65090_regulator_disable_ext_control(
        return tps65090_config_ext_control(ri, false);
 }
 
-static void tps65090_configure_regulator_config(
-               struct tps65090_regulator_plat_data *tps_pdata,
-               struct regulator_config *config)
-{
-       if (gpio_is_valid(tps_pdata->gpio)) {
-               int gpio_flag = GPIOF_OUT_INIT_LOW;
-
-               if (tps_pdata->reg_init_data->constraints.always_on ||
-                               tps_pdata->reg_init_data->constraints.boot_on)
-                       gpio_flag = GPIOF_OUT_INIT_HIGH;
-
-               config->ena_gpio = tps_pdata->gpio;
-               config->ena_gpio_initialized = true;
-               config->ena_gpio_flags = gpio_flag;
-       } else {
-               config->ena_gpio = -EINVAL;
-               config->ena_gpio_initialized = false;
-       }
-}
-
 #ifdef CONFIG_OF
 static struct of_regulator_match tps65090_matches[] = {
        { .name = "dcdc1", },
@@ -385,9 +365,26 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
                rpdata->enable_ext_control = of_property_read_bool(
                                        tps65090_matches[idx].of_node,
                                        "ti,enable-ext-control");
-               if (rpdata->enable_ext_control)
-                       rpdata->gpio = of_get_named_gpio(np,
-                                       "dcdc-ext-control-gpios", 0);
+               if (rpdata->enable_ext_control) {
+                       enum gpiod_flags gflags;
+
+                       if (ri_data->constraints.always_on ||
+                           ri_data->constraints.boot_on)
+                               gflags = GPIOD_OUT_HIGH;
+                       else
+                               gflags = GPIOD_OUT_LOW;
+
+                       rpdata->gpiod = devm_gpiod_get_from_of_node(&pdev->dev,
+                                                                   tps65090_matches[idx].of_node,
+                                                                   "dcdc-ext-control-gpios", 0,
+                                                                   gflags,
+                                                                   "tps65090");
+                       if (IS_ERR(rpdata->gpiod))
+                               return ERR_CAST(rpdata->gpiod);
+                       if (!rpdata->gpiod)
+                               dev_err(&pdev->dev,
+                                       "could not find DCDC external control GPIO\n");
+               }
 
                if (of_property_read_u32(tps65090_matches[idx].of_node,
                                         "ti,overcurrent-wait",
@@ -455,8 +452,7 @@ static int tps65090_regulator_probe(struct platform_device *pdev)
                 */
                if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
                        if (tps_pdata->enable_ext_control) {
-                               tps65090_configure_regulator_config(
-                                               tps_pdata, &config);
+                               config.ena_gpiod = tps_pdata->gpiod;
                                ri->desc->ops = &tps65090_ext_control_ops;
                        } else {
                                ret = tps65090_regulator_disable_ext_control(

diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 67d144b..f05bf4a 100644 (file)
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -83,6 +83,8 @@ enum {
 #define TPS65090_MAX_REG       TPS65090_REG_AD_OUT2
 #define TPS65090_NUM_REGS      (TPS65090_MAX_REG + 1)
 
+struct gpio_desc;
+
 struct tps65090 {
        struct device           *dev;
        struct regmap           *rmap;
@@ -95,8 +97,8 @@ struct tps65090 {
  * @reg_init_data: The regulator init data.
  * @enable_ext_control: Enable extrenal control or not. Only available for
  *     DCDC1, DCDC2 and DCDC3.
- * @gpio: Gpio number if external control is enabled and controlled through
- *     gpio.
+ * @gpiod: Gpio descriptor if external control is enabled and controlled through
+ *     gpio
  * @overcurrent_wait_valid: True if the overcurrent_wait should be applied.
  * @overcurrent_wait: Value to set as the overcurrent wait time.  This is the
  *     actual bitfield value, not a time in ms (valid value are 0 - 3).
@@ -104,7 +106,7 @@ struct tps65090 {
 struct tps65090_regulator_plat_data {
        struct regulator_init_data *reg_init_data;
        bool enable_ext_control;
-       int gpio;
+       struct gpio_desc *gpiod;
        bool overcurrent_wait_valid;
        int overcurrent_wait;
 };