goto out;
}
- strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
+ strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
/*
* If the parent device has a DMA mask associated with it,
* propagate it down to the children.
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
locomo_init_one_child(lchip, &locomo_devices[i]);
-
return 0;
out:
val = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
- if (val > sharpsl_pm.machinfo->charge_on_temp)
+ if (val > sharpsl_pm.machinfo->charge_on_temp) {
+ printk(KERN_WARNING "Not charging: temperature out of limits.\n");
return -1;
+ }
return 0;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:21:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 15:21:30 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
#
# Cirrus EP93xx Implementation Options
#
+CONFIG_CRUNCH=y
#
# EP93xx Platforms
#
+CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9315=y
+CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
CONFIG_MACH_TS72XX=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_TS7250=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# I2C Hardware Bus support
#
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:12:49 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 15:28:50 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:13:50 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:13:35 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
#
# System Type
#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git2
-# Wed Jun 21 22:20:18 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:15:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git10
-# Mon Jun 26 13:45:44 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul 9 14:16:20 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_OMAP is not set
#
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
+#
+
#
+# Atmel AT91 Processors
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
#
# AT91RM9200 Board Type
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_KAFA is not set
#
-# AT91RM9200 Feature Selections
+# AT91 Feature Selections
#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
switch (dev->class >> 8) {
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
- case PCI_CLASS_BRIDGE_ISA:
- case PCI_CLASS_BRIDGE_EISA:
- /*
- * If this device is an ISA bridge, set isa_bridge
- * to point at this device. We will then go looking
- * for things like keyboard, etc.
- */
- isa_bridge = dev;
- break;
-#endif
case PCI_CLASS_BRIDGE_PCI:
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;
}
#ifdef CONFIG_HOTPLUG_CPU
+
+static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+ pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
+
+ spin_lock_irq(&desc->lock);
+ desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
+ spin_unlock_irq(&desc->lock);
+}
+
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
* the affinity settings do not allow other CPUs, force them onto any
static struct mcp_plat_data collie_mcp_data = {
- .mccr0 = MCCR0_ADM,
- .sclk_rate = 11981000,
+ .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
+ .sclk_rate = 9216000,
};
#ifdef CONFIG_SHARP_LOCOMO
* Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
* and sometimes charges them when it should not. If it makes angry lithium to come your way...
* ...well, you have been warned.
+ *
+ * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
+ * and my collie did not explode (yet).
*/
#include <linux/module.h>
{
int err;
- if (sharpsl_param.adadj != -1) {
+ if (sharpsl_param.adadj != -1)
ad_revise = sharpsl_param.adadj;
- }
/* Register interrupt handler. */
if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
static void collie_charge(int on)
{
- if (on) {
- printk("Should start charger\n");
- } else {
- printk("Should stop charger\n");
- }
-#ifdef I_AM_SURE
+ extern struct platform_device colliescoop_device;
- /* Zaurus seems to contain LTC1731 ; it should know when to
+ /* Zaurus seems to contain LTC1731; it should know when to
* stop charging itself, so setting charge on should be
* relatively harmless (as long as it is not done too often).
*/
-#define CF_BUF_CTRL_BASE 0xF0800000
-#define SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-#define SCOOP_REG_GPWR SCOOP_REG(SCOOP_GPWR)
-
if (on) {
set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
} else {
reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
}
-#endif
}
static void collie_discharge(int on)
ucb1x00_adc_enable(ucb);
- /* Gives 75..130 */
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
ucb1x00_adc_enable(ucb);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
- /* gives values 160..255 with battery removed... and
- 145..255 with battery inserted. (on AC), goes as low as
- 80 on DC. */
+
+ mdelay(1);
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
case SHARPSL_BATT_TEMP:
return collie_read_temp();
case SHARPSL_ACIN_VOLT:
- return 0x1;
+ return 500;
case SHARPSL_STATUS_ACIN: {
int ret = GPLR & COLLIE_GPIO_AC_IN;
printk("AC status = %d\n", ret);
}
}
+struct battery_thresh collie_battery_levels_acin[] = {
+ { 420, 100},
+ { 417, 95},
+ { 415, 90},
+ { 413, 80},
+ { 411, 75},
+ { 408, 70},
+ { 406, 60},
+ { 403, 50},
+ { 398, 40},
+ { 391, 25},
+ { 10, 5},
+ { 0, 0},
+};
+
struct battery_thresh collie_battery_levels[] = {
- { 368, 100},
- { 358, 25},
- { 356, 5},
+ { 394, 100},
+ { 390, 95},
+ { 380, 90},
+ { 370, 80},
+ { 368, 75}, /* From sharp code: battery high with frontlight */
+ { 366, 70}, /* 60..90 -- fake values invented by me for testing */
+ { 364, 60},
+ { 362, 50},
+ { 360, 40},
+ { 358, 25}, /* From sharp code: battery low with frontlight */
+ { 356, 5}, /* From sharp code: battery verylow with frontlight */
{ 0, 0},
};
.postsuspend = collie_postsuspend,
.charger_wakeup = collie_charger_wakeup,
.should_wakeup = collie_should_wakeup,
- .bat_levels = 3,
+ .bat_levels = 12,
.bat_levels_noac = collie_battery_levels,
- .bat_levels_acin = collie_battery_levels,
+ .bat_levels_acin = collie_battery_levels_acin,
.status_high_acin = 368,
.status_low_acin = 358,
.status_high_noac = 368,
.status_low_noac = 358,
+ .charge_on_volt = 350, /* spitz uses 2.90V, but lets play it safe. */
+ .charge_on_temp = 550,
+ .charge_acin_high = 550, /* collie does not seem to have sensor for this, anyway */
+ .charge_acin_low = 450, /* ignored, too */
+ .fatal_acin_volt = 356,
+ .fatal_noacin_volt = 356,
+
+ .batfull_irq = 1, /* We do not want periodical charge restarts */
};
static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/vic.h>
+#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-#if defined(CONFIG_ARCH_VERSATILE_PB)
- void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
-#elif defined(CONFIG_MACH_VERSATILE_AB)
- void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
-#endif
+ void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
*/
- if (fb->panel == &sanyo_2_5_in) {
+ if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
/*
* If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
*/
- if (fb->panel == &sanyo_2_5_in) {
+ if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
unsigned long ctrl;
u16 __padding;
#endif
u64 low;
-} floatx80;
+} __attribute__ ((packed,aligned(4))) floatx80;
/*
-------------------------------------------------------------------------------
};
EXPORT_SYMBOL(of_bus_type);
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
int (*match)(struct device_node *parent);
void (*count_cells)(struct device_node *child,
int *addrc, int *sizec);
- u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna);
- int (*translate)(u32 *addr, u64 offset, int na);
+ int (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
unsigned int (*get_flags)(u32 *addr);
};
get_cells(dev, addrc, sizec);
}
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range. Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+ const u32 *size, int na, int ns)
{
- u64 cp, s, da;
+ u64 a = of_read_addr(addr, na);
+ u64 b = of_read_addr(base, na);
+
+ if (a < b)
+ return 1;
- cp = of_read_addr(range, na);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr, na);
+ b += of_read_addr(size, ns);
+ if (a >= b)
+ return 1;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
+ return 0;
}
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 a = of_read_addr(addr, na);
- memset(addr, 0, na * 4);
- a += offset;
- if (na > 1)
- addr[na - 2] = a >> 32;
- addr[na - 1] = a & 0xffffffffu;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ if (ns > 2) {
+ printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+ return -EINVAL;
+ }
+
+ if (of_out_of_range(addr, range, range + na + pna, na, ns))
+ return -EINVAL;
+
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
+
+ /* Add in the child address offset. */
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
return 0;
}
return IORESOURCE_MEM;
}
-
/*
* PCI bus specific translator
*/
static int of_bus_pci_match(struct device_node *np)
{
- return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+ if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ /* Do not do PCI specific frobbing if the
+ * PCI bridge lacks a ranges property. We
+ * want to pass it through up to the next
+ * parent as-is, not with the PCI translate
+ * method which chops off the top address cell.
+ */
+ if (!of_find_property(np, "ranges", NULL))
+ return 0;
+
+ return 1;
+ }
+
+ return 0;
}
static void of_bus_pci_count_cells(struct device_node *np,
*sizec = 2;
}
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 cp, s, da;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
/* Check address type match */
if ((addr[0] ^ range[0]) & 0x03000000)
- return OF_BAD_ADDR;
+ return -EINVAL;
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+ na - 1, ns))
+ return -EINVAL;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
+ /* Add in the child address offset, skipping high cell. */
+ for (i = 0; i < na - 1; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
+
+ return 0;
}
static unsigned int of_bus_pci_get_flags(u32 *addr)
*sizec = 1;
}
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
{
return of_bus_default_map(addr, range, na, ns, pna);
}
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr, offset, na);
-}
-
static unsigned int of_bus_sbus_get_flags(u32 *addr)
{
return IORESOURCE_MEM;
.match = of_bus_pci_match,
.count_cells = of_bus_pci_count_cells,
.map = of_bus_pci_map,
- .translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
/* SBUS */
.match = of_bus_sbus_match,
.count_cells = of_bus_sbus_count_cells,
.map = of_bus_sbus_map,
- .translate = of_bus_sbus_translate,
.get_flags = of_bus_sbus_get_flags,
},
/* Default */
.match = NULL,
.count_cells = of_bus_default_count_cells,
.map = of_bus_default_map,
- .translate = of_bus_default_translate,
.get_flags = of_bus_default_get_flags,
},
};
u32 *ranges;
unsigned int rlen;
int rone;
- u64 offset = OF_BAD_ADDR;
ranges = of_get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
- offset = of_read_addr(addr, na);
- memset(addr, 0, pna * 4);
- goto finish;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ memset(result, 0, pna * 4);
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] =
+ addr[na - 1 - i];
+
+ memcpy(addr, result, pna * 4);
+ return 0;
}
/* Now walk through the ranges */
rlen /= 4;
rone = na + pna + ns;
for (; rlen >= rone; rlen -= rone, ranges += rone) {
- offset = bus->map(addr, ranges, na, ns, pna);
- if (offset != OF_BAD_ADDR)
- break;
+ if (!bus->map(addr, ranges, na, ns, pna))
+ return 0;
}
- if (offset == OF_BAD_ADDR)
- return 1;
- memcpy(addr, ranges + na, 4 * pna);
-
-finish:
- /* Translate it into parent bus space */
- return pbus->translate(addr, offset, pna);
+ return 1;
}
+static int of_resource_verbose;
+
static void __init build_device_resources(struct of_device *op,
struct device *parent)
{
pbus = of_match_bus(pp);
pbus->count_cells(dp, &pna, &pns);
- if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+ if (build_one_resource(dp, bus, pbus, addr,
+ dna, dns, pna))
break;
dna = pna;
build_res:
memset(r, 0, sizeof(*r));
+
+ if (of_resource_verbose)
+ printk("%s reg[%d] -> %llx\n",
+ op->node->full_name, index,
+ result);
+
if (result != OF_BAD_ADDR) {
r->start = result & 0xffffffff;
r->end = result + size - 1;
postcore_initcall(of_bus_driver_init);
+static int __init of_debug(char *str)
+{
+ int val = 0;
+
+ get_option(&str, &val);
+ if (val & 1)
+ of_resource_verbose = 1;
+ return 1;
+}
+
+__setup("of_debug=", of_debug);
+
int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
{
/* initialize common driver fields */
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
+ rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+ if (rc)
+ device_unregister(&ofdev->dev);
- return 0;
+ return rc;
}
void of_device_unregister(struct of_device *ofdev)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 23 23:17:09 2006
+# Linux kernel version: 2.6.18-rc1
+# Wed Jul 12 14:00:58 2006
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_MEMORY_HOTPLUG=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_SBUS=y
CONFIG_SBUSCHAR=y
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_COMPOUND=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
+CONFIG_MD_RAID456=m
# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Graphics support
#
+# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
};
EXPORT_SYMBOL(of_bus_type);
-static inline u64 of_read_addr(u32 *cell, int size)
+static inline u64 of_read_addr(const u32 *cell, int size)
{
u64 r = 0;
while (size--)
int (*match)(struct device_node *parent);
void (*count_cells)(struct device_node *child,
int *addrc, int *sizec);
- u64 (*map)(u32 *addr, u32 *range, int na, int ns, int pna);
- int (*translate)(u32 *addr, u64 offset, int na);
+ int (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
unsigned int (*get_flags)(u32 *addr);
};
get_cells(dev, addrc, sizec);
}
-static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna)
+/* Make sure the least significant 64-bits are in-range. Even
+ * for 3 or 4 cell values it is a good enough approximation.
+ */
+static int of_out_of_range(const u32 *addr, const u32 *base,
+ const u32 *size, int na, int ns)
{
- u64 cp, s, da;
+ u64 a = of_read_addr(addr, na);
+ u64 b = of_read_addr(base, na);
- cp = of_read_addr(range, na);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr, na);
+ if (a < b)
+ return 1;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
+ b += of_read_addr(size, ns);
+ if (a >= b)
+ return 1;
+
+ return 0;
}
-static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+static int of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 a = of_read_addr(addr, na);
- memset(addr, 0, na * 4);
- a += offset;
- if (na > 1)
- addr[na - 2] = a >> 32;
- addr[na - 1] = a & 0xffffffffu;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ if (ns > 2) {
+ printk("of_device: Cannot handle size cells (%d) > 2.", ns);
+ return -EINVAL;
+ }
+
+ if (of_out_of_range(addr, range, range + na + pna, na, ns))
+ return -EINVAL;
+
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
+
+ /* Add in the child address offset. */
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
return 0;
}
static int of_bus_pci_match(struct device_node *np)
{
- return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex");
+ if (!strcmp(np->type, "pci") || !strcmp(np->type, "pciex")) {
+ /* Do not do PCI specific frobbing if the
+ * PCI bridge lacks a ranges property. We
+ * want to pass it through up to the next
+ * parent as-is, not with the PCI translate
+ * method which chops off the top address cell.
+ */
+ if (!of_find_property(np, "ranges", NULL))
+ return 0;
+
+ return 1;
+ }
+
+ return 0;
}
static void of_bus_pci_count_cells(struct device_node *np,
*sizec = 2;
}
-static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_pci_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
{
- u64 cp, s, da;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
/* Check address type match */
if ((addr[0] ^ range[0]) & 0x03000000)
- return OF_BAD_ADDR;
+ return -EINVAL;
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
+ if (of_out_of_range(addr + 1, range + 1, range + na + pna,
+ na - 1, ns))
+ return -EINVAL;
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
+ /* Start with the parent range base. */
+ memcpy(result, range + na, pna * 4);
-static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
+ /* Add in the child address offset, skipping high cell. */
+ for (i = 0; i < na - 1; i++)
+ result[pna - 1 - i] +=
+ (addr[na - 1 - i] -
+ range[na - 1 - i]);
+
+ memcpy(addr, result, pna * 4);
+
+ return 0;
}
static unsigned int of_bus_pci_get_flags(u32 *addr)
return flags;
}
-/*
- * ISA bus specific translator
- */
-
-static int of_bus_isa_match(struct device_node *np)
-{
- return !strcmp(np->name, "isa");
-}
-
-static void of_bus_isa_count_cells(struct device_node *child,
- int *addrc, int *sizec)
-{
- if (addrc)
- *addrc = 2;
- if (sizec)
- *sizec = 1;
-}
-
-static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna)
-{
- u64 cp, s, da;
-
- /* Check address type match */
- if ((addr[0] ^ range[0]) & 0x00000001)
- return OF_BAD_ADDR;
-
- /* Read address values, skipping high cell */
- cp = of_read_addr(range + 1, na - 1);
- s = of_read_addr(range + na + pna, ns);
- da = of_read_addr(addr + 1, na - 1);
-
- if (da < cp || da >= (cp + s))
- return OF_BAD_ADDR;
- return da - cp;
-}
-
-static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-static unsigned int of_bus_isa_get_flags(u32 *addr)
-{
- unsigned int flags = 0;
- u32 w = addr[0];
-
- if (w & 1)
- flags |= IORESOURCE_IO;
- else
- flags |= IORESOURCE_MEM;
- return flags;
-}
-
/*
* SBUS bus specific translator
*/
*sizec = 1;
}
-static u64 of_bus_sbus_map(u32 *addr, u32 *range, int na, int ns, int pna)
+static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna)
{
return of_bus_default_map(addr, range, na, ns, pna);
}
-static int of_bus_sbus_translate(u32 *addr, u64 offset, int na)
-{
- return of_bus_default_translate(addr, offset, na);
-}
-
static unsigned int of_bus_sbus_get_flags(u32 *addr)
{
return IORESOURCE_MEM;
.match = of_bus_pci_match,
.count_cells = of_bus_pci_count_cells,
.map = of_bus_pci_map,
- .translate = of_bus_pci_translate,
.get_flags = of_bus_pci_get_flags,
},
- /* ISA */
- {
- .name = "isa",
- .addr_prop_name = "reg",
- .match = of_bus_isa_match,
- .count_cells = of_bus_isa_count_cells,
- .map = of_bus_isa_map,
- .translate = of_bus_isa_translate,
- .get_flags = of_bus_isa_get_flags,
- },
/* SBUS */
{
.name = "sbus",
.match = of_bus_sbus_match,
.count_cells = of_bus_sbus_count_cells,
.map = of_bus_sbus_map,
- .translate = of_bus_sbus_translate,
.get_flags = of_bus_sbus_get_flags,
},
/* Default */
.match = NULL,
.count_cells = of_bus_default_count_cells,
.map = of_bus_default_map,
- .translate = of_bus_default_translate,
.get_flags = of_bus_default_get_flags,
},
};
u32 *ranges;
unsigned int rlen;
int rone;
- u64 offset = OF_BAD_ADDR;
ranges = of_get_property(parent, "ranges", &rlen);
if (ranges == NULL || rlen == 0) {
- offset = of_read_addr(addr, na);
- memset(addr, 0, pna * 4);
- goto finish;
+ u32 result[OF_MAX_ADDR_CELLS];
+ int i;
+
+ memset(result, 0, pna * 4);
+ for (i = 0; i < na; i++)
+ result[pna - 1 - i] =
+ addr[na - 1 - i];
+
+ memcpy(addr, result, pna * 4);
+ return 0;
}
/* Now walk through the ranges */
rlen /= 4;
rone = na + pna + ns;
for (; rlen >= rone; rlen -= rone, ranges += rone) {
- offset = bus->map(addr, ranges, na, ns, pna);
- if (offset != OF_BAD_ADDR)
- break;
+ if (!bus->map(addr, ranges, na, ns, pna))
+ return 0;
}
- if (offset == OF_BAD_ADDR)
+
+ return 1;
+}
+
+static int __init use_1to1_mapping(struct device_node *pp)
+{
+ char *model;
+
+ /* If this is on the PMU bus, don't try to translate it even
+ * if a ranges property exists.
+ */
+ if (!strcmp(pp->name, "pmu"))
return 1;
- memcpy(addr, ranges + na, 4 * pna);
+ /* If we have a ranges property in the parent, use it. */
+ if (of_find_property(pp, "ranges", NULL) != NULL)
+ return 0;
+
+ /* If the parent is the dma node of an ISA bus, pass
+ * the translation up to the root.
+ */
+ if (!strcmp(pp->name, "dma"))
+ return 0;
+
+ /* Similarly for Simba PCI bridges. */
+ model = of_get_property(pp, "model", NULL);
+ if (model && !strcmp(model, "SUNW,simba"))
+ return 0;
-finish:
- /* Translate it into parent bus space */
- return pbus->translate(addr, offset, pna);
+ return 1;
}
+static int of_resource_verbose;
+
static void __init build_device_resources(struct of_device *op,
struct device *parent)
{
memcpy(addr, reg, na * 4);
- /* If the immediate parent has no ranges property to apply,
- * just use a 1<->1 mapping. Unless it is the 'dma' child
- * of an isa bus, which must be passed up towards the root.
- *
- * Also, don't try to translate PMU bus device registers.
- */
- if ((of_find_property(pp, "ranges", NULL) == NULL &&
- strcmp(pp->name, "dma") != 0) ||
- !strcmp(pp->name, "pmu")) {
+ if (use_1to1_mapping(pp)) {
result = of_read_addr(addr, na);
goto build_res;
}
pbus = of_match_bus(pp);
pbus->count_cells(dp, &pna, &pns);
- if (build_one_resource(dp, bus, pbus, addr, dna, dns, pna))
+ if (build_one_resource(dp, bus, pbus, addr,
+ dna, dns, pna))
break;
dna = pna;
build_res:
memset(r, 0, sizeof(*r));
+
+ if (of_resource_verbose)
+ printk("%s reg[%d] -> %lx\n",
+ op->node->full_name, index,
+ result);
+
if (result != OF_BAD_ADDR) {
if (tlb_type == hypervisor)
result &= 0x0fffffffffffffffUL;
return ret;
}
+static int of_irq_verbose;
+
static unsigned int __init build_one_device_irq(struct of_device *op,
struct device *parent,
unsigned int irq)
if (dp->irq_trans) {
irq = dp->irq_trans->irq_build(dp, irq,
dp->irq_trans->data);
-#if 1
- printk("%s: direct translate %x --> %x\n",
- dp->full_name, orig_irq, irq);
-#endif
+
+ if (of_irq_verbose)
+ printk("%s: direct translate %x --> %x\n",
+ dp->full_name, orig_irq, irq);
+
return irq;
}
iret = apply_interrupt_map(dp, pp,
imap, imlen, imsk,
&irq);
-#if 1
- printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
- op->node->full_name,
- pp->full_name, this_orig_irq,
- (iret ? iret->full_name : "NULL"), irq);
-#endif
+
+ if (of_irq_verbose)
+ printk("%s: Apply [%s:%x] imap --> [%s:%x]\n",
+ op->node->full_name,
+ pp->full_name, this_orig_irq,
+ (iret ? iret->full_name : "NULL"), irq);
+
if (!iret)
break;
unsigned int this_orig_irq = irq;
irq = pci_irq_swizzle(dp, pp, irq);
-#if 1
- printk("%s: PCI swizzle [%s] %x --> %x\n",
- op->node->full_name,
- pp->full_name, this_orig_irq, irq);
-#endif
+ if (of_irq_verbose)
+ printk("%s: PCI swizzle [%s] "
+ "%x --> %x\n",
+ op->node->full_name,
+ pp->full_name, this_orig_irq,
+ irq);
+
}
if (pp->irq_trans) {
irq = ip->irq_trans->irq_build(op->node, irq,
ip->irq_trans->data);
-#if 1
- printk("%s: Apply IRQ trans [%s] %x --> %x\n",
- op->node->full_name, ip->full_name, orig_irq, irq);
-#endif
+ if (of_irq_verbose)
+ printk("%s: Apply IRQ trans [%s] %x --> %x\n",
+ op->node->full_name, ip->full_name, orig_irq, irq);
return irq;
}
postcore_initcall(of_bus_driver_init);
+static int __init of_debug(char *str)
+{
+ int val = 0;
+
+ get_option(&str, &val);
+ if (val & 1)
+ of_resource_verbose = 1;
+ if (val & 2)
+ of_irq_verbose = 1;
+ return 1;
+}
+
+__setup("of_debug=", of_debug);
+
int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus)
{
/* initialize common driver fields */
if (rc)
return rc;
- device_create_file(&ofdev->dev, &dev_attr_devspec);
+ rc = device_create_file(&ofdev->dev, &dev_attr_devspec);
+ if (rc)
+ device_unregister(&ofdev->dev);
- return 0;
+ return rc;
}
void of_device_unregister(struct of_device *ofdev)
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+static int sabre_device_needs_wsync(struct device_node *dp)
+{
+ struct device_node *parent = dp->parent;
+ char *parent_model, *parent_compat;
+
+ /* This traversal up towards the root is meant to
+ * handle two cases:
+ *
+ * 1) non-PCI bus sitting under PCI, such as 'ebus'
+ * 2) the PCI controller interrupts themselves, which
+ * will use the sabre_irq_build but do not need
+ * the DMA synchronization handling
+ */
+ while (parent) {
+ if (!strcmp(parent->type, "pci"))
+ break;
+ parent = parent->parent;
+ }
+
+ if (!parent)
+ return 0;
+
+ parent_model = of_get_property(parent,
+ "model", NULL);
+ if (parent_model &&
+ (!strcmp(parent_model, "SUNW,sabre") ||
+ !strcmp(parent_model, "SUNW,simba")))
+ return 0;
+
+ parent_compat = of_get_property(parent,
+ "compatible", NULL);
+ if (parent_compat &&
+ (!strcmp(parent_compat, "pci108e,a000") ||
+ !strcmp(parent_compat, "pci108e,a001")))
+ return 0;
+
+ return 1;
+}
+
static unsigned int sabre_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
virt_irq = build_irq(inofixup, iclr, imap);
+ /* If the parent device is a PCI<->PCI bridge other than
+ * APB, we have to install a pre-handler to ensure that
+ * all pending DMA is drained before the interrupt handler
+ * is run.
+ */
regs = of_get_property(dp, "reg", NULL);
- if (regs &&
- ((regs->phys_hi >> 16) & 0xff) != irq_data->pci_first_busno) {
+ if (regs && sabre_device_needs_wsync(dp)) {
irq_install_pre_handler(virt_irq,
sabre_wsync_handler,
(void *) (long) regs->phys_hi,
- (void *)
- controller_regs +
- SABRE_WRSYNC);
+ (void *) irq_data);
}
return virt_irq;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
- if (id != UCB_ID_1200 && id != UCB_ID_1300) {
+ if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
goto err_disable;
}
#define UCB_ID 0x0c
#define UCB_ID_1200 0x1004
#define UCB_ID_1300 0x1005
+#define UCB_ID_TC35143 0x9712
#define UCB_MODE 0x0d
#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
static unsigned int serial_in(struct uart_8250_port *up, int offset)
{
+ unsigned int tmp;
offset = map_8250_in_reg(up, offset) << up->port.regshift;
switch (up->port.iotype) {
return __raw_readl(up->port.membase + offset);
#endif
+ case UPIO_TSI:
+ if (offset == UART_IIR) {
+ tmp = readl((u32 *)(up->port.membase + UART_RX));
+ return (cpu_to_le32(tmp) >> 8) & 0xff;
+ } else
+ return readb(up->port.membase + offset);
+
default:
return inb(up->port.iobase + offset);
}
__raw_writel(value, up->port.membase + offset);
break;
#endif
+ case UPIO_TSI:
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, up->port.membase + offset);
+ break;
default:
outb(value, up->port.iobase + offset);
touch_nmi_watchdog();
- if (oops_in_progress) {
- locked = spin_trylock_irqsave(&up->port.lock, flags);
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ /* serial8250_handle_port() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
} else
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock(&up->port.lock);
/*
* First save the IER then disable the interrupts
serial_out(up, UART_IER, ier);
if (locked)
- spin_unlock_irqrestore(&up->port.lock, flags);
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
}
static int serial8250_console_setup(struct console *co, char *options)
}
#ifdef CONFIG_SERIAL_DZ_CONSOLE
-static void dz_console_putchar(struct uart_port *port, int ch)
+static void dz_console_putchar(struct uart_port *uport, int ch)
{
struct dz_port *dport = (struct dz_port *)uport;
unsigned long flags;
up[(chip * 2) + 1].port.fifosize = 1;
up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
- up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
up[(chip * 2) + 1].port.line = (chip * 2) + 1;
- up[(chip * 2) + 1].flags = 0;
+ up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
}
}
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_AU:
+ case UPIO_TSI:
snprintf(address, sizeof(address),
"MMIO 0x%lx", port->mapbase);
break;
struct device_node *dp = op->node;
struct uart_sunsu_port *up;
struct resource *rp;
+ enum su_type type;
int err;
- if (inst >= UART_NR)
- return -EINVAL;
+ type = su_get_type(dp);
+ if (type == SU_PORT_PORT) {
+ if (inst >= UART_NR)
+ return -EINVAL;
+ up = &sunsu_ports[inst];
+ } else {
+ up = kzalloc(sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
+ }
- up = &sunsu_ports[inst];
up->port.line = inst;
spin_lock_init(&up->port.lock);
- up->su_type = su_get_type(dp);
+ up->su_type = type;
rp = &op->resource[0];
- up->port.mapbase = op->resource[0].start;
-
+ up->port.mapbase = rp->start;
up->reg_size = (rp->end - rp->start) + 1;
up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
- if (!up->port.membase)
+ if (!up->port.membase) {
+ if (type != SU_PORT_PORT)
+ kfree(up);
return -ENOMEM;
+ }
up->port.irq = op->irqs[0];
err = 0;
if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
err = sunsu_kbd_ms_init(up);
- if (err)
+ if (err) {
+ kfree(up);
goto out_unmap;
+ }
+ dev_set_drvdata(&op->dev, up);
return 0;
}
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- } else if (up->port.type != PORT_UNKNOWN)
+ kfree(up);
+ } else if (up->port.type != PORT_UNKNOWN) {
uart_remove_one_port(&sunsu_reg, &up->port);
+ }
+
+ dev_set_drvdata(&dev->dev, NULL);
return 0;
}
#define VERSATILE_SYS_OSC1_OFFSET 0x1C
#endif
+#define VERSATILE_SYS_OSCCLCD_OFFSET 0x1c
+
#define VERSATILE_SYS_LOCK_OFFSET 0x20
#define VERSATILE_SYS_100HZ_OFFSET 0x24
#define VERSATILE_SYS_CFGDATA1_OFFSET 0x28
#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
#define read_cr0() ({ \
unsigned int __dummy; \
__asm__ __volatile__( \
__dummy; \
})
#define write_cr0(x) \
- __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x))
#define read_cr2() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr2(x) \
- __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x))
#define read_cr3() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr3(x) \
- __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x))
#define read_cr4() ({ \
unsigned int __dummy; \
:"=r" (__dummy)); \
__dummy; \
})
-
#define read_cr4_safe() ({ \
unsigned int __dummy; \
/* This could fault if %cr4 does not exist */ \
: "=r" (__dummy): "0" (0)); \
__dummy; \
})
-
#define write_cr4(x) \
- __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
#define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */
#define wbinvd() \
- __asm__ __volatile__ ("wbinvd": : :"memory");
+ __asm__ __volatile__ ("wbinvd": : :"memory")
static inline unsigned long get_limit(unsigned long segment)
{
#define get_user(x, ptr) \
({ \
int __gu_err = 0; \
- typeof(*(ptr)) __gu_val = 0; \
+ typeof(x) __gu_val = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
__get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \
__get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \
break; \
case 8: \
- memcpy(&__gu_val, ptr, sizeof (*(ptr))); \
+ memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \
break; \
default: \
__gu_val = 0; \
__gu_err = __get_user_bad(); \
break; \
} \
- (x) = __gu_val; \
+ (x) = (typeof(*(ptr))) __gu_val; \
__gu_err; \
})
#define __get_user(x, ptr) get_user(x, ptr)
extern int __get_user_bad(void);
-#define __get_user_asm(err,x,ptr,bwl,reg) \
- __asm__ ("move" #bwl " %1,%0" \
- : "=d" (x) \
+#define __get_user_asm(err,x,ptr,bwl,reg) \
+ __asm__ ("move" #bwl " %1,%0" \
+ : "=d" (x) \
: "m" (*__ptr(ptr)))
#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
ARCHDEF := defined __sparc__ && defined __arch64__
ALTARCHDEF := defined __sparc__ && !defined __arch64__
-unifdef-y := fbio.h perfctr.h
+unifdef-y += fbio.h perfctr.h
header-y += apb.h asi.h bbc.h bpp.h display7seg.h envctrl.h floppy.h \
ipc.h kdebug.h mostek.h openprom.h openpromio.h parport.h \
pconf.h psrcompat.h pstate.h reg.h uctx.h utrap.h watchdog.h
#define _ROOT_DEV_H_
#include <linux/major.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
enum {
Root_NFS = MKDEV(UNNAMED_MAJOR, 255),
#define UPIO_MEM (2)
#define UPIO_MEM32 (3)
#define UPIO_AU (4) /* Au1x00 type IO */
+#define UPIO_TSI (5) /* Tsi108/109 type IO */
unsigned int read_status_mask; /* driver specific */
unsigned int ignore_status_mask; /* driver specific */
#endif
};
+#ifdef CONFIG_LOCKDEP
+
+/*
+ * Slab sometimes uses the kmalloc slabs to store the slab headers
+ * for other slabs "off slab".
+ * The locking for this is tricky in that it nests within the locks
+ * of all other slabs in a few places; to deal with this special
+ * locking we put on-slab caches into a separate lock-class.
+ */
+static struct lock_class_key on_slab_key;
+
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+ int q;
+
+ for (q = 0; q < MAX_NUMNODES; q++) {
+ if (!s->cs_cachep->nodelists[q] || OFF_SLAB(s->cs_cachep))
+ continue;
+ lockdep_set_class(&s->cs_cachep->nodelists[q]->list_lock,
+ &on_slab_key);
+ }
+}
+
+#else
+static inline void init_lock_keys(struct cache_sizes *s)
+{
+}
+#endif
+
+
+
/* Guard access to the cache-chain. */
static DEFINE_MUTEX(cache_chain_mutex);
static struct list_head cache_chain;
}
}
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
- int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
{
struct slab *slabp = virt_to_slab(objp);
int nodeid = slabp->nodeid;
STATS_INC_NODEFREES(cachep);
if (l3->alien && l3->alien[nodeid]) {
alien = l3->alien[nodeid];
- spin_lock_nested(&alien->lock, nesting);
+ spin_lock(&alien->lock);
if (unlikely(alien->avail == alien->limit)) {
STATS_INC_ACOVERFLOW(cachep);
__drain_alien_cache(cachep, alien, nodeid);
{
}
-static inline int cache_free_alien(struct kmem_cache *cachep, void *objp,
- int nesting)
+static inline int cache_free_alien(struct kmem_cache *cachep, void *objp)
{
return 0;
}
ARCH_KMALLOC_FLAGS|SLAB_PANIC,
NULL, NULL);
}
+ init_lock_keys(sizes);
sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
sizes->cs_size,
}
#endif
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting);
-
/**
* slab_destroy - destroy and release all objects in a slab
* @cachep: cache pointer being destroyed
call_rcu(&slab_rcu->head, kmem_rcu_free);
} else {
kmem_freepages(cachep, addr);
- if (OFF_SLAB(cachep)) {
- unsigned long flags;
-
- /*
- * lockdep: we may nest inside an already held
- * ac->lock, so pass in a nesting flag:
- */
- local_irq_save(flags);
- __cache_free(cachep->slabp_cache, slabp, 1);
- local_irq_restore(flags);
- }
+ if (OFF_SLAB(cachep))
+ kmem_cache_free(cachep->slabp_cache, slabp);
}
}
if (slabp->inuse == 0) {
if (l3->free_objects > l3->free_limit) {
l3->free_objects -= cachep->num;
- /*
- * It is safe to drop the lock. The slab is
- * no longer linked to the cache. cachep
- * cannot disappear - we are using it and
- * all destruction of caches must be
- * serialized properly by the user.
- */
- spin_unlock(&l3->list_lock);
slab_destroy(cachep, slabp);
- spin_lock(&l3->list_lock);
} else {
list_add(&slabp->list, &l3->slabs_free);
}
#endif
check_irq_off();
l3 = cachep->nodelists[node];
- spin_lock_nested(&l3->list_lock, SINGLE_DEPTH_NESTING);
+ spin_lock(&l3->list_lock);
if (l3->shared) {
struct array_cache *shared_array = l3->shared;
int max = shared_array->limit - shared_array->avail;
* Release an obj back to its cache. If the obj has a constructed state, it must
* be in this state _before_ it is released. Called with disabled ints.
*/
-static void __cache_free(struct kmem_cache *cachep, void *objp, int nesting)
+static inline void __cache_free(struct kmem_cache *cachep, void *objp)
{
struct array_cache *ac = cpu_cache_get(cachep);
check_irq_off();
objp = cache_free_debugcheck(cachep, objp, __builtin_return_address(0));
- if (cache_free_alien(cachep, objp, nesting))
+ if (cache_free_alien(cachep, objp))
return;
if (likely(ac->avail < ac->limit)) {
BUG_ON(virt_to_cache(objp) != cachep);
local_irq_save(flags);
- __cache_free(cachep, objp, 0);
+ __cache_free(cachep, objp);
local_irq_restore(flags);
}
EXPORT_SYMBOL(kmem_cache_free);
kfree_debugcheck(objp);
c = virt_to_cache(objp);
debug_check_no_locks_freed(objp, obj_size(c));
- __cache_free(c, (void *)objp, 0);
+ __cache_free(c, (void *)objp);
local_irq_restore(flags);
}
EXPORT_SYMBOL(kfree);
projects / linux-2.6-microblaze.git / commitdiff