ARM: ux500: move snowball LED pin control to device tree

This moves the Snowball LED pin config to the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 744ab95..605188b 100644 (file)
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -76,6 +76,8 @@
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpioled_snowball_mode>;
                used-led {
                        label = "user_led";
                        gpios = <&gpio4 14 0x4>;
@@ -414,6 +416,15 @@
 
                                };
                        };
+                       gpio_led {
+                               gpioled_snowball_mode: gpioled_default {
+                                       snowball_cfg1 {
+                                               ste,pins = "GPIO142_C11";
+                                               ste,config = <&gpio_out_hi>;
+                                       };
+
+                               };
+                       };
                };
 
                mcde@a0350000 {

diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 0e5d268..aae9cfc 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -297,8 +297,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
 };
 
 static struct pinctrl_map __initdata snowball_pinmap[] = {
-       /* User LED */
-       DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
        /*  Accelerometer/Magnetometer */
        DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */
        DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */